Injectable and pH-Responsive Silk Nanofiber Hydrogels for Sustained Anticancer Drug Delivery

New Strategies for Safe Cancer Therapy Using Electrospun Nanofibers: A Short Review

Electrospun nanofibers regarding their special features, including high drug loading capacity, high surface to volume area, flexibility, and ease of production and operation, are of great interest for being used in tissue engineering, and drug delivery approaches. In this context, several studies have been done for the production of biodegradable and biocompatible scaffolds containing different anticancer agents for fighting with solid tumors. Surprisingly, these scaffolds are able to deliver different combinations of drugs and agents, such as nanoparticles and release them in a time dependent manner. Here in this review, we summarize the principles of electrospinning and their uses in entrapment of drugs and anti-proliferative agents suitable for cancer therapy. The latest studies performed on treating cancer using electrospinning are mentioned and their advantages and disadvantages over conventional treatment methods are discussed.

Dual stimuli-responsive polyurethane-based hydrogels as smart drug delivery carriers for the advanced treatment of chronic skin wounds

The design of multi-stimuli-responsive vehicles for the controlled and localized release of drugs is a challenging issue increasingly catching the attention of many research groups working on the advanced treatment of hard-to-close wounds. In this work, a thermo- and pH-responsive hydrogel (P-CHP407) was prepared from an ad hoc synthesized amphiphilic poly(ether urethane) (CHP407) exposing a significant amount of –COOH groups (8.8 ± 0.9 nmol/g_polymer). The exposure of acid moieties in P-CHP407 hydrogel led to slightly lower initial gelation temperature (12.1 °C vs. 14.6 °C, respectively) and gelation rate than CHP407 hydrogel, as rheologically assessed. Nanoscale hydrogel characterization by Low Field NMR (LF-NMR) spectroscopy suggested that the presence of carboxylic groups in P-CHP407 caused the formation of bigger micelles with a thicker hydrated shell than CHP407 hydrogels, as further proved by Dynamic Light Scattering analyses. In addition, P-CHP407 hydrogel showed improved capability to change its internal pH compared to CHP407 one when incubated with an alkaline buffer (pH 8) (e.g., pH_{change_5min} = 3.76 and 1.32, respectively). Moreover, LF-NMR characterization suggested a stronger alkaline-pH-induced interaction of water molecules with micelles exposing –COOH groups. Lastly, the hydrogels were found biocompatible according to ISO 10993 and able to load and release Ibuprofen: delivery kinetics of Ibuprofen was enhanced by P-CHP407 hydrogels at alkaline pH, suggesting their potential use as smart delivery systems in the treatment of chronic infected wounds.

•

Chronic infected wounds are characterized by the production of alkaline exudate.

•

Multi-stimuli-responsive hydrogels are powerful tools to design smart drug carriers.

•

Alkaline wound exudate can successfully guide drug release kinetics.

•

Hydrogel thermosensitivity allows easy injectability in the wound site.

•

LF-NMR describes nano-scale hydrogel structural changes in an alkaline environment.

Crosslinking strategies for silk fibroin hydrogels: promising biomedical materials

Due to their strong biomimetic potential, silk fibroin (SF) hydrogels are impressive candidates for tissue engineering, due to their tunable mechanical properties, biocompatibility, low immunotoxicity, controllable biodegradability, and a remarkable capacity for biomaterial modification and the realization of a specific molecular structure. The fundamental chemical and physical structure of SF allows its structure to be altered using various crosslinking strategies. The established crosslinking methods enable the formation of three-dimensional (3D) networks under physiological conditions. There are different chemical and physical crosslinking mechanisms available for the generation of SF hydrogels (SFHs). These methods, either chemical or physical, change the structure of SF and improve its mechanical stability, although each method has its advantages and disadvantages. While chemical crosslinking agents guarantee the mechanical strength of SFH through the generation of covalent bonds, they could cause some toxicity, and their usage is not compatible with a cell-friendly technology. On the other hand, physical crosslinking approaches have been implemented in the absence of chemical solvents by the induction of β-sheet conformation in the SF structure. Unfortunately, it is not easy to control the shape and properties of SFHs when using this method. The current review discusses the different crosslinking mechanisms of SFH in detail, in order to support the development of engineered SFHs for biomedical applications.

Horseradish Peroxidase-Crosslinked Calcium-Containing Silk Fibroin Hydrogels as Artificial Matrices for Bone Cancer Research

Hydrogels, being capable of mimicking the extracellular matrix composition of tissues, are greatly used as artificial matrices in tissue engineering applications. In this study, the generation of horseradish peroxidase (HRP)-crosslinked silk fibroin (SF) hydrogels, using calcium peroxide as oxidizer is reported. The proposed fast forming calcium-containing SF hydrogels spontaneously undergo SF conformational changes from random coil to β-sheet during time, exhibiting ionic, and pH stimuli responsiveness. In vitro response shows calcium-containing SF hydrogels' encapsulation properties and their ability to promote SaOs-2 tumor cells death after 10 days of culturing, upon complete β-sheet conformation transition. Calcium-containing SF hydrogels' angiogenic potential investigated in an in ovo chick chorioallantoic membrane (CAM) assay, show a high number of converging blood vessels as compared to the negative control, although no endothelial cells infiltration is observed. The in vivo response evaluated in subcutaneous implantation in CD1 and nude NCD1 mice shows that calcium-containing SF hydrogels are stable up to 6 weeks after implantation. However, an increased number of dead cells are also present in the surrounding tissue. The results suggest the potential of calcium-containing SF hydrogels to be used as novel in situ therapeutics for bone cancer treatment applications, particularly to osteosarcoma.

Injectable Desferrioxamine-Laden Silk Nanofiber Hydrogels for Accelerating Diabetic Wound Healing

Dysangiogenesis and chronic inflammation are two critical reasons for diabetic foot ulcers. Desferrioxamine (DFO) was used clinically in the treatment of diabetic foot ulcers by repeated injections because of its capacity to induce vascularization. Biocompatible carriers that release DFO slowly and facilitate healing simultaneously are preferable options to accelerate the healing of diabetic wounds. Here, DFO-laden silk nanofiber hydrogels that provided a sustained release of DFO for more than 40 days were used to treat diabetic wounds. The DFO-laden hydrogels stimulated the healing of diabetic wounds. In vitro cell studies revealed that the DFO-laden hydrogels modulated the migration and gene expression of endothelial cells, and they also tuned the inflammation behavior of macrophages. These results were confirmed in an in vivo diabetic wound model. The DFO-laden hydrogels alleviated dysangiogenesis and chronic inflammation in the diabetic wounds, resulting in a more rapid wound healing and increased collagen deposition. Both in vitro and in vivo studies suggested potential clinical applications of these DFO-laden hydrogels in the treatment of diabetic ulcers.

Top-down extraction of surface carboxylated-silk nanocrystals and application in hydrogel preparation

Bionanomaterial based hydrogels originated from natural biopolymer have drawn much attention for advanced applications. However, nanosilk-based hydrogels derived from top-down approaches remain in their infancy. First, nanosilks based on existing methods fail to prepare hydrogels; second, both nanosilk extraction and surface modification remain a challenge due to high crystallinity and sophisticated hierarchical structures. To produce nanosilk-based hydrogels, pretreatment and oxidation are necessary. In this work, pretreatments were conducted first to loosen the sophisticated structures of natural silk fibers, NaClO oxidation was utilized in succession to introduce carboxyl groups onto silk fibroin. Combined with moderate mechanical disintegration, silk nanocrystals with additional carboxyl groups were prepared facilely. Finally, silk nanocrystal-based hydrogels were prepared successfully through gas phase coagulation. An optimization of pretreatment approaches and oxidation conditions was carried out. The morphologies, chemical and crystalline structures of original, pretreated and oxidized silk fibroin as well as nanofibrillated silk were investigated. In addition, the silk nanocrystal-based hydrogel exhibited outstanding mechanical properties compared to those of dissolved and regenerated silk fibroin-based hydrogels. Moreover, silk nanocrystal-based aerogels present highly porous, interconnected, and crisscrossed network nanostructures, which are ideal candidates for tissue regeneration and provide new prospects as porous scaffolds for bioengineering applications.

Ethanol-induced coacervation in aqueous gelatin solution for constructing nanospheres and networks: Morphology, dynamics and thermal sensitivity

Ethanol was used to induce coacervation in aqueous solutions of gelatin. Coacervation resulted from phase separation driven by ethanol as a poor solvent for gelatin, impacting aggregation of gelatin chains. Static coacervation was performed to investigate coacervate morphology, and gelatin concentration and ethanol temperature influenced the morphologies of the gelatin coacervates. High-concentration gelatin solutions (>4.8 wt%) treated with lower temperature ethanol (<25 °C) formed network morphologies, while low-concentration gelatin solution (<4.8 wt%) treated with ethanol near room temperature formed nanosphere assemblies. Dispersive nanospheres were obtained after treatment with higher temperature ethanol (~45 °C). Stirring the mixture of gelatin solution and ethanol resulted in dispersed nanospheres where the size was adjusted by changing the volume ratio of aqueous gelatin solution and ethanol (V_Gel:V_EtOH) and the gelatin concentration. Turbidity and absorbance measurements were carried out to further investigate coacervation dynamics. The cocervation system reached dynamic equilibrium according to the V_Gel:V_EtOH, suggesting phase separation and molecular arrangements were key. DLS results showed that reversible changes in coacervate radius could be attained by periodic heating and cooling cycles (25-60 °C). This work provides useful information for constructing gelatin-based materials using a facile coacervation method.

Plasmonic-Enhanced Graphene Oxide-Based Aquatic Robot for Target Cargo Delivery

The design and fabrication of light-actuated robots that can perform selective motions and targeted cargo delivery have attracted increasing interest in various fields. However, these robots' high-speed locomotion, precise direction control, and efficient actuation ability remain big challenges because of the relatively low photothermal efficiency, especially in the aquatic environment. This work proposes a plasmonic-enhanced graphene oxide (GO)-gold nanorod (Au NR)/calcium alginate (Ca-alginate) aquatic robot. The proposed robot design includes an independent power module (GO-Au NR layer) and a microscale cargo-loaded module (Ca-alginate layer). The plasmonic effect of Au NRs greatly improves the heat transfer efficiency, which in turn increases the temperature variation up to three times during the actuating process. This situation leads to a high traveling speed of the robot up to ∼35 mm/s. Benefiting from the high light-to-work efficiency, the position and posture of the proposed robot have good control in the aquatic environment. The robot is capable of programmable trajectory following, multirobot gathering, separation, and cooperation, providing an efficient solution for cargo delivery. Moreover, after releasing the cargo-loaded module to the target location, the power module can be easily actuated for collection, avoiding the potential side effects from the residual photothermal particles in conventional methods. The plasmonic-enhanced photothermal mechanism and independent module design offer a strategy for light-actuated aquatic robot development and would bring opportunities to further develop biomedical applications.

Releasable antimicrobial polymer-silk coatings for combating multidrug-resistant bacteria

Controlled release of synthetic cationic antimicrobial polymers from silk-based coating for preventing bacterial biofilm formation on the surface and for killing planktonic bacteria cells.

Recent Advances in Injectable Hydrogels for Controlled and Local Drug Delivery

Injectable hydrogels have received considerable interest in the biomedical field due to their potential applications in minimally invasive local drug delivery, more precise implantation, and site-specific drug delivery into poorly reachable tissue sites and into interface tissues, where wound healing takes a long time. Injectable hydrogels, such as in situ forming and/or shear-thinning hydrogels, can be generated using chemically and/or physically crosslinked hydrogels. Yet, for controlled and local drug delivery applications, the ideal injectable hydrogel should be able to provide controlled and sustained release of drug molecules to the target site when needed and should limit nonspecific drug molecule distribution in healthy tissues. Thus, such hydrogels should sense the environmental changes that arise in disease states and be able to release the optimal amount of drug over the necessary time period to the target region. To address this, researchers have designed stimuli-responsive injectable hydrogels. Stimuli-responsive hydrogels change their shape or volume when they sense environmental stimuli, e.g., pH, temperature, light, electrical signals, or enzymatic changes, and deliver an optimal concentration of drugs to the target site without affecting healthy tissues.

Silk fibroins in multiscale dimensions for diverse applications

Silk biomaterials in different forms such as particles, coatings and their assemblies, represent unique type of materials in multiple scales and dimensions. Herein, we provide an overview of multi-scale silk fibroin materials including silk particles, silk coatings and silk assemblies, each of which represents a unique type of material with wide range of applications. They feature tunable structures and mechanical properties with excellent biocompatibility, which are essentially required for various biomedical and drug delivery applications. The review focuses on bringing a new perspective on the utilization of regenerated silk fibroins in modern biomedicine by beginning with the fabrication of silk in multiscale dimensions and their state-of-the-art applications in various biomedical and bioelectronic fields. It covers the fundamentals of processing silk fibroins in multi-dimensions (sizes and shapes) with a specific emphasis on its structural tunability at various length scales (nano-micro) by using the latest fabrication methods/mechanisms and advanced fabrication technologies, followed by their recent applications in diverse fields of biomedicine.

All-Aqueous-Processed Injectable In Situ Forming Macroporous Silk Gel Scaffolds for Minimally Invasive Intracranial and Osteological Therapies

Hydrogels are widely utilized in regenerative medicine for drug delivery and tissue repair due to their superior biocompatibility and high similarity to the extracellular matrix. For minimally invasive therapies, in situ forming gel scaffolds are desirable, but technical challenges remain to be overcome to achieve the balance between tissue-like strength and cell-sized porosity, especially for intracranial and osteological therapies. Here, a new method-inspired by the liquid crystalline spinning process in natural silk fibers-is reported for preparing injectable silk gel scaffolds with favorable preclinical efficacy and unique characteristics including 1) in situ gelling for minimally invasive surgeries, 2) controllable porosity for efficient cellular infiltration and desirable degradation, 3) resilient and tunable mechanical properties that are compatible with the modulus regime of native soft tissues, and 4) all-aqueous processing that avoids toxic solvents and enables facile loading of bioactive agents. Moreover, hierarchically structured heterogeneous silk gel scaffolds with variable porosity and bioactive agent gradients within 3D matrices can be achieved for sustained drug release and guided tissue regeneration. Preclinical efficacy studies in rodent models show efficient bacterium and glioma inhibition and positive effects on bone regeneration and vascularization.

Silk degumming time controls horseradish peroxidase-catalyzed hydrogel properties

Hydrogels provide promising applications in tissue engineering and regenerative medicine, with silk fibroin (SF) offering biocompatibility, biodegradability and tunable mechanical properties. The molecular weight (MW) distribution of SF chains varies from ∼80 to 400 kDa depending on the extraction and purification process utilized to prepare the protein polymer. Here, we report a fundamental study on the effect of different silk degumming (extraction) time (DT) on biomaterial properties of enzymatically crosslinked hydrogels, including secondary structure, mechanical stiffness, in vitro degradation, swelling/contraction, optical transparency and cell behaviour. The results indicate that DT plays a crucial role in determining material properties of the hydrogel; decrease in DT increases β-sheet (crystal) formation and mechanical stiffness while decreasing degradation rate and optical transparency. The findings on the relationships between properties of silk hydrogels and DT should facilitate the more rational design of silk-based hydrogel biomaterials to match properties needed for diverse purpose in biomedical engineering.

Photo-Electro Active Nanocomposite Silk Hydrogel for Spatiotemporal Controlled Release of Chemotherapeutics: An In Vivo Approach toward Suppressing Solid Tumor Growth

Conventional systemic chemotherapeutic regimens suffer from challenges such as nonspecificity, shorter half-life, clearance of drugs, and dose-limiting toxicity. Localized delivery of chemotherapeutic drugs through noninvasive spatiotemporally controllable stimuli-responsive drug delivery systems could overcome these drawbacks while utilizing drugs approved for cancer treatment. In this regard, we developed photoelectro active nanocomposite silk-based drug delivery systems (DDS) exhibiting on-demand drug release in vivo. A functionally modified single-walled carbon nanotube loaded with doxorubicin (DOX) was embedded within a cross-linker free silk hydrogel. The resultant nanocomposite silk hydrogel showed electrical field responsiveness and near-infrared (NIR) laser-induced hyperthermal effect. The remote application of these stimuli in tandem or independent manner led to the increased thermal and electrical conductivity of nanocomposite hydrogel, which effectively triggered the intermittent on-demand drug release. In a proof-of-concept in vivo tumor regression study, the nanocomposite hydrogel was administered in a minimally invasive way at the periphery of the tumor by covering most of it. During the 21-day study, drastic tumor regression was recorded upon regular stimulation of nanocomposite hydrogel with simultaneous or individual external application of an electric field and NIR laser. Tumor cell death marker expression analysis uncovered the induction of apoptosis in tumor cells leading to its shrinkage. Heart ultrasound and histology revealed no cardiotoxicity associated with localized DOX treatment. To our knowledge, this is also the first report to show the simultaneous application of electric field and NIR laser in vivo for localized tumor therapy, and our results suggested that such strategy might have high clinical translational potential.

Development and Characterization of Calmodulin-Based Copolymeric Hydrogels

Recently, there has been growing interest in harnessing genetically engineered polymers to develop responsive biomaterials, such as hydrogels. Unlike their synthetic counterparts, genetically engineered polymers are produced without the use of toxic reagents and can easily be programmed to incorporate desirable hydrogel properties, including bioactivity, biodegradability, and monodispersity. Herein, we report the development of a copolymeric hydrogel that is based on the calcium-dependent protein, calmodulin (CaM). For our system, CaM and M13, a CaM-binding peptide, were incorporated into genetically engineered polymers with intervening linkers containing cleavable sequences. Spectroscopic and multiple-particle tracking (MPT) studies demonstrate that these polymers self-assemble through calcium-stabilized, noncovalent crosslinking to form a soft viscoelastic material. MPT further revealed that gelation is concentration-dependent. Collagenase digests show that the protein polymers are selectively degraded through specific cleavage. The modularity and stimuli-responsiveness of this system suggest its potential as a flexible scaffold for biomedical applications.

Green Plasmonic Nanoparticles and Bio-Inspired Stimuli-Responsive Vesicles in Cancer Therapy Application

: In the past years, there is a growing interest in the application of nanoscaled materials in cancer therapy because of their unique physico-chemical properties. However, the dark side of their usability is limited by their possible toxic behaviour and accumulation in living organisms. Starting from this assumption, the search for a green alternative to produce nanoparticles (NPs) or the discovery of green molecules, is a challenge in order to obtain safe materials. In particular, gold (Au NPs) and silver (Ag NPs) NPs are particularly suitable because of their unique physico-chemical properties, in particular plasmonic behaviour that makes them useful as active anticancer agents. These NPs can be obtained by green approaches, alternative to conventional chemical methods, owing to the use of phytochemicals, carbohydrates, and other biomolecules present in plants, fungi, and bacteria, reducing toxic effects. In addition, we analysed the use of green and stimuli-responsive polymeric bio-inspired nanovesicles, mainly used in drug delivery applications that have revolutionised the way of drugs supply. Finally, we reported the last examples on the use of metallic and Au NPs as self-propelling systems as new concept of nanorobot, which is able to respond and move towards specific physical or chemical stimuli in biological entities.

Electric field-driven building blocks for introducing multiple gradients to hydrogels

Gradient biomaterials are considered as preferable matrices for tissue engineering due to better simulation of native tissues. The introduction of gradient cues usually needs special equipment and complex process but is only effective to limited biomaterials. Incorporation of multiple gradients in the hydrogels remains challenges. Here, beta-sheet rich silk nanofibers (BSNF) were used as building blocks to introduce multiple gradients into different hydrogel systems through the joint action of crosslinking and electric field. The blocks migrated to the anode along the electric field and gradually stagnated due to the solution-hydrogel transition of the systems, finally achieving gradient distribution of the blocks in the formed hydrogels. The gradient distribution of the blocks could be tuned easily through changing different factors such as solution viscosity, which resulted in highly tunable gradient of mechanical cues. The blocks were also aligned under the electric field, endowing orientation gradient simultaneously. Different cargos could be loaded on the blocks and form gradient cues through the same crosslinking-electric field strategy. The building blocks could be introduced to various hydrogels such as Gelatin and NIPAM, indicating the universality. Complex niches with multiple gradient cues could be achieved through the strategy. Silk-based hydrogels with suitable mechanical gradients were fabricated to control the osteogenesis and chondrogenesis. Chondrogenic-osteogenic gradient transition was obtained, which stimulated the ectopic osteochondral tissue regeneration in vivo. The versatility and highly controllability of the strategy as well as multifunction of the building blocks reveal the applicability in complex tissue engineering and various interfacial tissues.

Natural Nanofiber Shuttles for Transporting Hydrophobic Cargo into Aqueous Solutions

Hydrophobic biomolecules realize their functions in vivo in aqueous environments, often through a delicate balance of amphiphilicity and chaperones. Introducing exogenous hydrophobic biomolecules into in vivo aqueous systems is a challenge in drug delivery and regenerative medicine, where labile linkers, carriers, and fusions or chimeric molecules are often designed to facilitate such aqueous interfaces. Here, we utilize naturally derived silk nanofiber shuttles with the capacity to transport hydrophobic cargos directly into aqueous solutions. These nanofibers disperse in organic solvents and in aqueous solutions because of their inherent amphiphilicity, with enriched hydrophobicity and strategically interspersed negatively charged groups. Hydrophobic molecules loaded on these shuttles in organic solvent-water systems separated from the solvent after centrifugation. These concentrated hydrophobic molecule-loaded nanofibers could then be dispersed into aqueous solution directly without modification. These shuttle systems were effective for different hydrophobic molecules such as drugs, vitamins, and dyes. Improved biological stability and functions of hydrophobic cargos after loading on these nanofibers suggest potential applications in drug delivery, cosmetology, medical diagnosis, and related health fields, with a relatively facile process.

Drug-loaded implantable surgical cavity-adaptive hydrogels for prevention of local tumor recurrence

High local post-surgical cancer recurrence severely impairs the patients' prognosis and survival rates. Here, an injectable in situ forming hydrogel was designed to locally controlled release gemcitabine (GEM) and doxorubicin (DOX) to prevent local cancer recurrence. The hydrogel was rapidly formed at the post-surgical cavity after the aldehyde hyaluronic acid (HA-CHO) and the carboxymethyl chitosan (CM-CS) were mixed and immediately injected. Meanwhile, DOX was conjugated to HA-CHO and GEM was doped in CM-CS to obtain GD-HA/CS-Gel. The drug-free hydrogels showed low cytotoxicity on L929 cells and good in vivo biocompatibility. The hydrogels had appropriate viscoelasticity and rapid self-healing ability, favoring long-term local residence at the injected site where GEM quickly released and DOX slowly released. GEM and DOX showed the synergistic anticancer effect on 4T1 cells. Breast cancer 4T1-cell xenograft models were established and the tumors were surgically resected. GD-HA/CS-Gel was implanted in the post-surgical cavity and cancer recurrence and distant lung metastasis were completely prevented in comparison with the single drug-loaded hydrogel or drug solutions. The locally implanted dual drug-loaded cavity-adaptive hydrogel is a promising medication for prevention of post-surgical tumor recurrence.

Palladium nanosheet-knotted injectable hydrogels formed via palladium-sulfur bonding for synergistic chemo-photothermal therapy

Nanoparticle (NP)-based hydrogels that can introduce synergistic advantages to the novel three-dimensional scaffold have garnered much attention recently. However, the application of NP-crosslinked hydrogels still remains challenging due to the complicated synthesis and/or modification of the NPs and the changed properties of the NPs after gelation. Herein, a novel palladium nanosheet (Pd NS)-based hydrogel (Pd Gel) with Pd NSs as crosslinkers was obtained by simply mixing Pd NSs with thiol-terminated four-arm polyethylene glycol (4arm-PEG-thiol). It was found that the formed Pd Gel was injectable, possibly due to the dynamic Pd-S bonds formed between Pd NSs and 4arm-PEG-thiol. In addition, compared with free Pd NSs, the Pd NSs within the hydrogel exhibited a significantly higher stability. We have further demonstrated that the formed hydrogel could encapsulate the commonly used anticancer drug doxorubicin (DOX) to form DOX@Pd Gel for combined chemo-photothermal therapy. Particularly, Pd NSs with a high absorption in the near-infrared (NIR) region could convert the energy of NIR laser into heat with a high efficiency, which is beneficial for photothermal therapy. Moreover, DOX@Pd Gel could maintain a sustainable release of DOX and the NIR laser irradiation could accelerate this drug release process. Then, the explosively released DOX and the hyperthermia generated from Pd NSs under NIR laser irradiation acted in a synergistic way to realize the combined therapeutic effect of the chemo-photothermal treatment. Finally, the in vivo anticancer effect and safety of the combined therapy were also verified by the tumor-bearing mouse model. Taken together, this work constructs a NP-crosslinked, NIR laser-activatable and injectable photothermal hydrogel via dynamic Pd-S bonding, and demonstrates that the hydrogel allows us to release DOX more precisely, eliminate tumor more effectively and inhibit tumor metastasis more persistently, which will advance the development of novel anticancer strategies.

Novel phthalocyanine-based micelles/PNIPAM composite hydrogels: spatially/temporally controlled drug release triggered by NIR laser irradiation

Near-infrared (NIR) light-responsive hydrogels hold significant potential for biomedical application, especially in the remote-controlled release of anticancer drugs.

Recent trends in protein and peptide-based biomaterials for advanced drug delivery

Engineering protein and peptide-based materials for drug delivery applications has gained momentum due to their biochemical and biophysical properties over synthetic materials, including biocompatibility, ease of synthesis and purification, tunability, scalability, and lack of toxicity. These biomolecules have been used to develop a host of drug delivery platforms, such as peptide- and protein-drug conjugates, injectable particles, and drug depots to deliver small molecule drugs, therapeutic proteins, and nucleic acids. In this review, we discuss progress in engineering the architecture and biological functions of peptide-based biomaterials -naturally derived, chemically synthesized and recombinant- with a focus on the molecular features that modulate their structure-function relationships for drug delivery.

Silk Fibroin-Based Biomaterials for Biomedical Applications: A Review

Since it was first discovered, thousands of years ago, silkworm silk has been known to be an abundant biopolymer with a vast range of attractive properties. The utilization of silk fibroin (SF), the main protein of silkworm silk, has not been limited to the textile industry but has been further extended to various high-tech application areas, including biomaterials for drug delivery systems and tissue engineering. The outstanding mechanical properties of SF, including its facile processability, superior biocompatibility, controllable biodegradation, and versatile functionalization have allowed its use for innovative applications. In this review, we describe the structure, composition, general properties, and structure-properties relationship of SF. In addition, the methods used for the fabrication and modification of various materials are briefly addressed. Lastly, recent applications of SF-based materials for small molecule drug delivery, biological drug delivery, gene therapy, wound healing, and bone regeneration are reviewed and our perspectives on future development of these favorable materials are also shared.

Injectable Silk-Vaterite Composite Hydrogels with Tunable Sustained Drug Release Capacity

Improving the efficiency of chemotherapy remains a key challenge in drug delivery. Many drug carriers have been designed to achieve multifunctional factors as part of their performance, including controlled release, dispersibility in aqueous environments, and targeting to cancer sites. However, it is difficult to optimize multiple properties simultaneously for a single carrier system. Here, synergistic carriers composed of vaterite microspheres and silk nanofiber hydrogels were developed to improve the dispersibility of vaterite spheres and the control of drug delivery without compromising the injectability or sensitivity to pH. The vaterite microspheres were dispersed homogeneously and remained stable in the silk nanofiber hydrogels. Doxorubicin (DOX) was effectively loaded on the vaterite spheres and silk nanofibers, forming synergistic silk-vaterite hydrogel delivery systems. The sustained delivery of DOX was tuned and controlled by vaterite stability and the DOX content loaded on the spheres and nanofibers. The cytotoxicity was regulated via the controlled delivery of DOX, suggesting the possibility of optimizing chemotherapeutic strategies. These silk-vaterite delivery hydrogels suggest a useful strategy for designing novel delivery systems for improved delivery and therapeutic benefits.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Injectable Silk Nanofiber Hydrogels for Sustained Release of Small-Molecule Drugs and Vascularization

Strategies to control neovascularization in damaged tissues remain a key issue in regenerative medicine. Unlike most reported desferrioxamine (DFO)-loaded systems where DFO demonstrates a burst release, here we attain zero-order release behavior above 40 days. This outcome was achieved by blending DFO with silk nanofibers with special hydrophilic-hydrophobic properties. The special silk nanofibers showed strong physical binding capacity with DFO, avoiding chemical cross-linking. Using these new biomaterials in vivo in a rat wound model suggested that the DFO-loaded silk nanofiber hydrogel systems stimulated angiogenesis by the sustained release of DFO, but also facilitated cell migration and tissue ingrowth. These features resulted in faster formation of a blood vessel network in the wounds, as well improved healing when compared to the free DFO system. The DFO-loaded systems are also suitable for the regeneration of other tissues, such as nerve and bone, suggesting universality in the biomedical field.

Extended release formulations using silk proteins for controlled delivery of therapeutics

INTRODUCTION

Silk is a promising biomaterial for controlled delivery of therapeutics and has a unique protein chemistry that can be tuned to form different carrier formats. The protein has been studied for sustained release depot systems for the targeted or localized delivery of drugs.

AREAS COVERED

An overview of natural silk proteins for controlled delivery of therapeutics is provided, with a focus on the features of silk proteins that allow them to be useful tools for controlled delivery. Recent applications of natural silk proteins as controlled delivery systems are also summarized.

EXPERT OPINION

The versatility of silk proteins makes them desirable biomaterials for a broad range of applications for controlled delivery of both small and large molecules. Further, the degradation profile leading to peptides and amino acids provides compatibility with pH-sensitive therapeutics. While silk sericin and spider silks are under study, silk fibroin extracted from silkworms (e.g. Bombyx mori) dominates pharmaceutical studies with silk. Silk fibroin can be formed into drug delivery tools for systemic or local injections, topical and transdermal applications, and implantation; depending on the target disease and therapeutic molecule. In vitro to in vivo correlations and scale-up needs are the next steps towards clinical applications.

Electrospun Nanofibers: Recent Applications in Drug Delivery and Cancer Therapy

Polymeric nanofibers (NFs) have been extensively reported as a biocompatible scaffold to be specifically applied in several researching fields, including biomedical applications. The principal researching lines cover the encapsulation of antitumor drugs for controlled drug delivery applications, scaffolds structures for tissue engineering and regenerative medicine, as well as magnetic or plasmonic hyperthermia to be applied in the reduction of cancer tumors. This makes NFs useful as therapeutic implantable patches or mats to be implemented in numerous biomedical researching fields. In this context, several biocompatible polymers with excellent biocompatibility and biodegradability including poly lactic-co-glycolic acid (PLGA), poly butylcyanoacrylate (PBCA), poly ethylenglycol (PEG), poly (ε-caprolactone) (PCL) or poly lactic acid (PLA) have been widely used for the synthesis of NFs using the electrospun technique. Indeed, other types of polymers with stimuli-responsive capabilities has have recently reported for the fabrication of polymeric NFs scaffolds with relevant biomedical applications. Importantly, colloidal nanoparticles used as nanocarriers and non-biodegradable structures have been also incorporated by electrospinning into polymeric NFs for drug delivery applications and cancer treatments. In this review, we focus on the incorporation of drugs into polymeric NFs for drug delivery and cancer treatment applications. However, the principal novelty compared with previously reported publications is that we also focus on recent investigations concerning new strategies that increase drug delivery and cancer treatments efficiencies, such as the incorporation of colloidal nanoparticles into polymeric NFs, the possibility to fabricate NFs with the capability to respond to external environments, and finally, the synthesis of hybrid polymeric NFs containing carbon nanotubes, magnetic and gold nanoparticles, with magnetic and plasmonic hyperthermia applicability.

Shape-Dependent Biodistribution of Biocompatible Silk Microcapsules

Microcapsules are emerging as promising microsize drug carriers due to their remarkable deformability. Shape plays a dominant role in determining their vascular transportation. Herein, we explored the effect of the shape of the microcapsules on the in vivo biodistribution for rational design of microcapsules to achieve optimized targeting efficiency. Silk fibroin, a biocompatible, biodegradable, and abundant material, was utilized as a building block to construct biconcave discoidal and spherical microcapsules with diameter of 1.8 μm and wall thickness of 20 nm. We have compared the cytocompatibility, cellular uptake, and biodistribution of both microcapsules. Both biconcave and spherical microcapsules exhibited excellent cytocompatibility and internalization into cancer cells. During blood circulation in mice, both microcapsules showed retention in liver and kidney and most underwent renal clearance. However, we observed significantly higher accumulation of biconcave silk microcapsules in lung compared with spherical microcapsules, and the accumulation was found to be stable in lung even after 3 days. The higher concentration of biconcave discoidal microcapsules found in lung arises from pulmonary environment, margination dynamics, and enhanced deformation in bloodstream. Red blood cell (RBC)-mimicking silk microcapsules demonstrated here can potentially serve as a promising platform for delivering drugs for lung diseases.

Graphene-Nanoparticle-Based Self-Healing Hydrogel in Preventing Postoperative Recurrence of Breast Cancer

Hydrogel is an ideal scaffold in the fields of regenerative medicine and tumor therapy because of its biomimetic ability to modulate tissue microenvironment. Herein, we fabricated a new kind of self-healing hydrogel based on graphene nanoparticle and expanded its application in postoperative recurrence of breast cancer. First, a facile method was used to prepare self-healing hydrogel via Schiff-base linkage, which composed of chondroitin sulfate multialdehyde (CSMA), branched polyethylenimine (BPEI) and BPEI conjugated graphene (BPEI-GO). BPEI-GO was doped in the network and participated in Schiff-base reaction and stabilized the structure, as well as provided sustained drug delivery, and near-infrared laser (NIR)-triggered photothermal effect. The hydrogels exhibited excellent self-healing (∼100%) and improved mechanical properties (7,000 Pa). Further, in vitro breast cancer cell inhibition study showed enhanced cell killing efficiency with synergistic chemo-photothermal therapy. In the breast cancer postoperative recurrence prevention mice model, we found that combination of Doxorubicin (DOX) and photothermal therapy in CSMA/BPEI/BPEI-GO hydrogels group reduced tumor recurrence to 33.3%, compared with 66.7% for DOX-loaded hydrogels without NIR irradiation, 66.7% for local administration of free DOX, 100% for hydrogels with NIR irradiation, blank hydrogels, and blank control. This study suggests the great potential of CSMA/BPEI/BPEI-GO hydrogels for postoperative recurrence prevention of breast cancer.

A tumor responsive self healing prodrug hydrogel enables synergistic action of doxorubicin and miltefosine for focal combination chemotherapy

Targeted therapy that facilitates the on-site, on-demand action of drug combinations is a promising approach for combination chemotherapy.

An injectable silk fibroin nanofiber hydrogel hybrid system for tumor upconversion luminescence imaging and photothermal therapy

In this paper, we developed a silk fibroin nanofiber (SF) hydrogel system complexed with upconversion nanoparticles and nano-graphene oxide (SF/UCNP@NGO) for upconversion luminescence imaging and photothermal therapy.

Polymeric Nanocarriers for the Delivery of Antimalarials

Malaria is an infectious disease caused by a protozoan parasite which is transmitted by female Anopheles mosquitoes around tropical and sub-tropical regions. Half of the world's population is at risk of being infected by malaria. This mainly includes children, pregnant women and people living with chronic diseases. The main factor that has contributed to the spread of this disease is the increase in the number of drug-resistant parasites. To overcome drug resistance, researchers have developed drug delivery systems from biodegradable polymers for the loading of antimalarials. The drug delivery systems were characterized by distinct features such as good biocompatibility, high percentage drug encapsulation, reduced drug toxicity and targeted drug delivery. In this review article, we highlight the various types of drug delivery systems developed from polymeric nanocarriers used for the delivery of antimalarials.

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

Hydrazone-Linkage-Based Self-Healing and Injectable Xanthan-Poly(ethylene glycol) Hydrogels for Controlled Drug Release and 3D Cell Culture

Polymeric hydrogels have been extensively explored for controlled drug-delivery applications, but there is an increasing demand for smart drug delivery combined with tunable physicochemical attributes and tissue engineering potential. In this work, novel xanthan-poly(ethylene glycol) (PEG) hydrogels were developed by cross-linking polysaccharide, oxidized xanthan, and 8-arm PEG hydrazine through dynamic, pH-responsive, and biodegradable hydrazone linkages. Aqueous solutions (pH 6.5) of oxidized xanthan and PEG hydrazine were mixed together at 37 °C to obtain hydrogels within minutes, and the formation of hydrazone linkages was ascertained using Fourier transform infrared spectroscopy. Fabrication of xanthan-PEG hydrogels using hydrazone linkages has not been reported previously. The 3% hydrogels exhibited the storage modulus of 194 Pa, which increased to 770 Pa for 5% hydrogels. When subjected to alternating cycles of varying strains of 1 and 800% (5 cycles), hydrogels demonstrated instant recovery each time the extreme strain was relieved, thus suggesting excellent self-healing capabilities. Doxorubicin (DOX), chemotherapeutic agent, was loaded onto hydrogels, and release studies were carried out at pH 5.5 (tumoral) and 7.4 (physiological). The cumulative release from 3, 4, and 5% hydrogels at pH 5.5 was 81.06, 61.98, and 41.67%, whereas the release at pH 7.4 was 47.43, 37.01, and 35.34% at 30 days. MTT assay showed that oxidized xanthan and PEG hydrazine are not toxic to mammalian cells (NIH-3T3), as the cell viabilities were found to be 84.66 and 102% for concentrations up to 1 mg/mL. The live/dead assay with encapsulated NIH-3T3 cells showed no significant dead cell population, suggesting excellent compatibility of hydrogels in 2D and 3D culture. DOX-loaded hydrogels exhibited cytotoxicity against A549 cells when exposed to media released from hydrogels. Overall, hydrogels developed in this work may have potential applications in drug delivery and 3D cell culture for cell delivery.