Ecofriendly Electrospun Membranes Loaded with Visible-Light-Responding Nanoparticles for Multifunctional Usages: Highly Efficient Air Filtration, Dye Scavenging, and Bactericidal Activity

TiO2–Based Nanofibrous Membranes for Environmental Protection

Electrospinning is a unique technique that can be used to synthesize polymer and metal oxide nanofibers. In materials science, a very active field is represented by research on electrospun nanofibers. Fibrous membranes present fascinating features, such as a large surface area to volume ratio, excellent mechanical behavior, and a large surface area, which have many applications. Numerous techniques are available for the nanofiber’s synthesis, but electrospinning is presented as a simple process that allows one to obtain porous membranes containing smooth non-woven nanofibers. Titanium dioxide (TiO2) is the most widely used catalyst in photocatalytic degradation processes, it has advantages such as good photocatalytic activity, excellent chemical stability, low cost and non-toxicity. Thus, titanium dioxide (TiO2) is used in the synthesis of nanofibrous membranes that benefit experimental research by easy recyclability, excellent photocatalytic activity, high specific surface areas, and exhibiting stable hierarchical nanostructures. This article presents the synthesis of fiber membranes through the processes of electrospinning, coaxial electrospinning, electrospinning and electrospraying or electrospinning and precipitation. In addition to the synthesis of membranes, the recent progress of researchers emphasizing the efficiency of nanofiber photocatalytic membranes in removing pollutants from wastewater is also presented.

Oxygen-Vacancy-Induced Synaptic Plasticity in an Electrospun InGdO Nanofiber Transistor for a Gas Sensory System with a Learning Function

The perceptual learning function of a simulating human body is very important for constructing a neural computing system and a brainlike computer in the future. The sense of smell is an important part of the human sensory nervous system. However, current gas sensors simply convert gas concentrations into electrical signals and do not have the same learning and memory function as synapses. To solve this problem, we propose a new sensing idea to induce and activate the synaptic properties of transistors by adjusting the oxygen vacancy in the active layer. This sensor combines gas detection with synaptic memory and learning and overcomes the disadvantage of the separation of synaptic transistors and sensors, thus greatly reducing the cost of production. This work combines the detection of N,N-dimethylformamide (DMF) gas with the synaptic mechanism of human olfactory nerves. We successfully fabricated an InGdO nanofiber field-effect transistor by electrostatic spinning and simulated the response of human olfactory synapses to target gas by regulating the oxygen vacancy of the InGdO nanofiber. The synaptic transistor response under different concentrations of unmodulated pulses is tested, and the pavlovian conditioned reflex experiment is simulated successfully. This work provides a new idea of a gas sensor device, which is very important for the development of high-performance gas sensors and bionic electronic devices in the future.

Synthesis of polyacrylonitrile/polytetrahydropyrimidine (PAN/PTHP) nanofibers with enhanced antibacterial and anti-viral activities for personal protective equipment

Emerging infectious diseases caused by the spread of bacteria and viruses are a major burden on global economic development and public health. At present, most personal protective equipment has weak antibacterial and anti-viral properties. The PAN/PTHP nanofibers reported in this article provide a new method for the development of personal protective equipment. In this study, a mixture of PTHP and PAN was prepared into PAN/PTHP nanofibers with high-efficiency and long-lasting antibacterial effects (>99.999%) through the electrospinning process. Live/dead staining and cell proliferation experiments showed that the preparation of PAN/PTHP nanofibers has good cell compatibility. In addition, PAN/PTHP nanofibers show obvious destructive effects on lentiviruses. Based on these characteristics, PAN/PTHP nanofibers were applied to facial masks, which can be used as the inflatable biocidal layer of facial masks and have an excellent interception effect on particles in the air. The successful synthesis of these fascinating materials may provide new insights for the development of new protective materials.

Electrode Materials for Supercapacitors in Hybrid Electric Vehicles: Challenges and Current Progress

For hybrid electric vehicles, supercapacitors are an attractive technology which, when used in conjunction with the batteries as a hybrid system, could solve the shortcomings of the battery. Supercapacitors would allow hybrid electric vehicles to achieve high efficiency and better power control. Supercapacitors possess very good power density. Besides this, their charge-discharge cycling stability and comparatively reasonable cost make them an incredible energy-storing device. The manufacturing strategy and the major parts like electrodes, current collector, binder, separator, and electrolyte define the performance of a supercapacitor. Among these, electrode materials play an important role when it comes to the performance of supercapacitors. They resolve the charge storage in the device and thus decide the capacitance. Porous carbon, conductive polymers, metal hydroxide, and metal oxides, which are some of the usual materials used for the electrodes in the supercapacitors, have some limits when it comes to energy density and stability. Major research in supercapacitors has focused on the design of stable, highly efficient electrodes with low cost. In this review, the most recent electrode materials used in supercapacitors are discussed. The challenges, current progress, and future development of supercapacitors are discussed as well. This study clearly shows that the performance of supercapacitors has increased considerably over the years and this has made them a promising alternative in the energy sector.

Inorganic-organic nanofiber networks with antibacteria properties for enhanced particulate filtration: The critical role of amorphous titania

The demand for air filter media at indoor and outdoor is increasing tremendously due to air pollution and especially for problems related to airborne particulate matter (PM). To realize that, here a class nanofiber air filter media with strong antibacterial activity, hydrophobic nature, high filtration efficiency with low pressure drop is prepared. Novel organic-inorganic nanocomposite nanofibers used in this work benefited for the multifunctional performance. Amorphous titanium dioxide (mTiO₂) is utilized for air filtration application which exhibits excellent enhancement of PM_2.5 filtration properties and antibacterial activity. The unique Poly (vinylpyrrolidone) (PVP)-mTiO₂ nanofiber air filter media acquired hydrophobic nature with a large increase in water contact angle of 127° from 36°. The resulting free-standing nanofiber filters exhibit high PM_2.5 filtration efficiency of >99.9% and low pressure drop of 39 Pa. Antibacterial activity of nanofibrous membrane has been rationally engineered by titanium oxide as the barrier to bacterial ingression. A long term of 160 h filtration test has proved PVP-mTiO₂ nanofibers air filter media holds outstanding 99% filtration efficiency for PM_2.5. This work takes forward a significant lead in design and production of high performance and very low pressure drop air filter media with a wide range of functional properties.

ZIF-8/PI Nanofibrous Membranes With High-Temperature Resistance for Highly Efficient PM0.3 Air Filtration and Oil-Water Separation

Air and water pollution poses a serious threat to public health and the ecological environment worldwide. Particulate matter (PM) is the major air pollutant, and its primary sources are processes that require high temperatures, such as fossil fuel combustion and vehicle exhaust. PM_0.3 can penetrate and seriously harm the bronchi of the lungs, but it is difficult to remove PM_0.3 due to its small size. Therefore, PM_0.3 air filters that are highly efficient and resistant to high temperatures must be developed. Polyimide (PI) is an excellent polymer with a high temperature resistance and a good mechanical property. Air filters made from PI nanofibers have a high PM removal efficiency and a low air flow resistance. Herein, zeolitic imidazolate framework-8 (ZIF-8) was used to modify PI nanofibers to fabricate air filters with a high specific surface area and filtration efficiency. Compared with traditional PI membranes, the ZIF-8/PI multifunction nanofiber membranes achieved super-high filtration efficiency for ultrafine particles (PM_0.3, 100%), and the pressure drop was only 63 Pa. The filtration mechanism of performance improvement caused by the introduction of ZIF-8/PI nanofiber membrane is explored. Moreover, the ZIF-8/PI nanofiber membranes exhibited excellent thermal stability (300 C) and efficient water–oil separation ability (99.85%).

Deacetylated cellulose acetate nanofibrous dressing loaded with chitosan/propolis nanoparticles for the effective treatment of burn wounds

Every year, about 1 out of 9 get burnt in Egypt, with a mortality rate of 37%, and they suffer from physical disfigurement and trauma. For the treatment of second-degree burns, we aim at making a smart bandage provided with control of drug release (using chitosan nanoparticles) to enhance the healing process. This bandage is composed of natural materials; namely, cellulose acetate (CA), chitosan, and propolis (bee resin) as the loaded drug. Cellulose acetate nanofibers were deacetylated by NaOH after optimizing the reaction time and the concentration of NaOH solution, and the product was confirmed with FTIR analysis. Chitosan/propolis nanoparticles were prepared by ion gelation method with size ranging from 100 to 200 nm and a polydispersity index of 0.3. Chitosan/propolis nanoparticles were preloaded in the CA solution to ensure homogeneity. Loaded deacetylated cellulose nanofibers have shown the highest hydrophobicity measured by contact angle. Cytotoxicity of propolis and chitosan/propolis nanoparticles were tested and the experimental IC₅₀ value was about 137.5 and 116.0 μg/mL, respectively, with p-value ≤0.001. In addition, chitosan/propolis nanoparticles loaded into cellulose nanofibers showed a cell viability of 89.46% in the cell viability test. In-vivo experiments showed that after 21 days of treatment with the loaded nanofibers repairing of epithelial cells, hair follicles and sebaceous glands in the skin of the burn wound were found in albino-mice model.

Exploring Reusability of Disposable Face Masks: Effects of Disinfection Methods on Filtration Efficiency, Breathability, and Fluid Resistance

To curb the spread of the COVID-19 virus, the use of face masks such as disposable surgical masks and N95 respirators is being encouraged and even enforced in some countries. The widespread use of masks has resulted in global shortages and individuals are reusing them. This calls for proper disinfection of the masks while retaining their protective capability. In this study, the killing efficiency of ultraviolet-C (UV-C) irradiation, dry heat, and steam sterilization against bacteria (Staphylococcus aureus), fungi (Candida albicans), and nonpathogenic virus (Salmonella virus P22) is investigated. UV-C irradiation for 10 min in a commercial UV sterilizer effectively disinfects surgical masks. N95 respirators require dry heat at 100 °C for hours while steam treatment works within 5 min. To address the question on safe reuse of the disinfected masks, their bacteria filtration efficiency, particle filtration efficiency, breathability, and fluid resistance are assessed. These performance factors are unaffected after 5 cycles of steam (10 min per cycle) and 10 cycles of dry heat at 100 °C (40 min per cycle) for N95 respirators, and 10 cycles of UV-C irradiation for surgical masks (10 min per side per cycle). These findings provide insights into formulating the standard procedures for reusing masks without compromising their protective ability.

Ambient Air Purification by Nanotechnologies: From Theory to Application

Air pollution has been a recurring problem in northern Chinese cities, and high concentrations of PM2.5 in winter have been a particular cause for concern. Secondary aerosols converted from precursor gases (i.e., nitrogen oxides and volatile organic compounds) evidently account for a large fraction of the PM2.5. Conventional control methods, such as dust removal, desulfurization, and denitrification, help reduce emissions from stationary combustion sources, but these measures have not led to decreases in haze events. Recent advances in nanomaterials and nanotechnology provide new opportunities for removing fine particles and gaseous pollutants from ambient air and reducing the impacts on human health. This review begins with overviews of air pollution and traditional abatement technologies, and then advances in ambient air purification by nanotechnologies, including filtration, adsorption, photocatalysis, and ambient-temperature catalysis are presented—from fundamental principles to applications. Current state-of-the-art developments in the use of nanomaterials for particle removal, gas adsorption, and catalysis are summarized, and practical applications of catalysis-based techniques for air purification by nanomaterials in indoor, semi-enclosed, and open spaces are highlighted. Finally, we propose future directions for the development of novel disinfectant nanomaterials and the construction of advanced air purification devices.

A review on graphitic carbon nitride (g-C3N4) based hybrid membranes for water and wastewater treatment

Graphitic carbon nitride (g-C₃N₄) has gained enormous attention for water and wastewater treatment. Compared with g-C₃N₄ nanopowders, g-C₃N₄ based hybrid membranes have demonstrated great potential for its superior practicability. This review outlines the preparation and characterization of g-C₃N₄ based hybrid membranes and presents their representative applications in water and wastewater treatment (e.g., removal of organic dyes, phenolic compounds, pharmaceuticals, salt ions, heavy metals, and oils). Meanwhile, g-C₃N₄ based films for the removal of contaminants through photocatalytic degradation is also summarized. In addition, the corresponding mechanisms and relevant findings are discussed. Finally, the challenges and research needs in the future and application of g-C₃N₄ based hybrid membranes are highlighted.

UV-Assisted Multiscale Superhydrophobic Wood Resisting Surface Contamination and Failure

In the modern forestry, the demand for renewable and environmentally friendly wood protection is increasing. This paper reports a green method for preparing stable and self-cleaning superhydrophobic coating for wood protection by dripping polyvinyl alcohol cross-linked hollow silica nanoparticles on the surface of wood in combination with polydimethylsiloxane modification. The coating is based on a laminated structure with layers stacked on the surface of the wood and cured quickly with the assistance of UV. The coatings obtained on wood substrates with appropriate ratios have excellent superhydrophobic properties, with an optimum water contact angle of up to 160.4 ± 0.2°. The coating also exhibits good transparency in the UV-visible spectrum and a maximum transmittance of 91%. With transmission electron microscopy, the microscopic morphology of the self-assembled hollow silica nanoparticles was observed. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction were also applied to investigate the morphology and chemical composition of the coatings. A water contact angle of 151.5 ± 0.7° was maintained even after the abrasion tests with sandpaper at a distance of 300 cm. Meanwhile, the resultant coatings exhibit good self-cleaning properties apart from mechanical durability and chemical stability, which enables effective resistance to contamination. Evidenced by the abovementioned data, this composite coating is capable of optimizing the surface wettability of wood, offering a new dimension to the extensive and prolonged application of wood and wood-based products. Furthermore, considering the advantages of this method, it could also be used in other areas in the future, such as glass, solar substrates, and optical devices.

High-performance anti-haze window screen based on multiscale structured polyvinylidene fluoride nanofibers

Indoor air quality (IAQ) has assumed new significance given the extensive amount of time spent indoor due to the coronavirus pandemic and particulate matter (PM) pollution. Accordingly, the development of window air filters to effectively intercept PM from outdoor air under natural ventilation conditions is an important research topic. However, most existing filters inevitably suffer from the compromise among filtration capability, transparency, and air permeability. In this study, we fabricate a high-performance transparent air filter to improve IAQ via natural ventilation. polyvinylidene fluoride (PVDF) superfine nanofibers of size 20-35 nm are prepared using extremely dilute solution electrospinning; a multi-scale nanofiber structure is then designed. By adjusting the ratio of PVDF superfine nanofibers (SNs) to PVDF coarse fibers (CNs), we balance the structure-performance relationship. Benefiting from the multiscale structural features that include a small pore size (0.72 μm) and high porosity (92.22%), the resulting filters exhibit excellent performance including high interception efficiency (99.92%) for PM_0.3, low air resistance (69 Pa), high transparency (∼80%) and stable filtration after 100 h of UV irradiation. This work describes a new strategy for the fabrication of nanofibers with true-nanoscale diameters and the design of high-performance air filters.

ZnO-Impregnated Polyacrylonitrile Nanofiber Filters against Various Phases of Air Pollutants

The incorporation of metal oxide nanoparticles (NPs) in fiber filters is an effective approach to enhance the specific surface area and surface roughness of the fiber, hence improving their efficiency for fine dust capture and other gas treatment or biological applications. Nevertheless, uneven distribution of NPs limits their practical applications. In this study, a commercial silane coupling agent (3-methacryloxypropyltrimethoxysilane) was used to improve the dispersion of zinc oxide (ZnO) NPs in thin polyacrylonitrile fibers. Scanning electron microscopy (SEM) revealed that the fibers incorporating the silane-modified NPs exhibited better distribution of NPs than those prepared with pristine ZnO NPs. The silane modification enhanced the specific surface area, surface roughness, and fiber porosity. In particular, the nanofiber filter incorporating 12 wt% ZnO NPs modified with 0.5 g silane per g of ZnO NPs maintained a filtration efficiency of 99.76% with a low pressure drop of 44 Pa, excellent antibacterial activity, and could decompose organic methylene blue dye with an efficiency of 85.11% under visible light.

Nanofibrous Photocatalytic Membranes Based on Tailored Anisotropic Gold/Ceria Nanoparticles

The combination of plasmonic nanoparticles with semiconductor photocatalysts is a good strategy for synthesizing highly efficient photocatalysts. Such binary nanoparticles have demonstrated enhanced catalytic activity in comparison to either plasmonic catalysts or semiconductor catalysts. However, problematic recovery and limited long-term colloidal stability of those nanoparticles in suspension limit their wide use in catalysis. To palliate to such limitations, we embedded binary nanoparticles in polymer fibers to design photocatalytic membranes. First, we used the selective over-growth of crystalline cerium oxide on the gold nanoparticle template with distinct shapes. Gold nanospheres, gold nanorods, and gold nanotriangles were used as the template for the growth of the cerium oxide domains. Then, the resulting nanoparticles were used to catalyze model reactions in suspensions. The gold nanoparticles covered with patches of cerium oxide outperformed the fully covered and naked nanoparticles in terms of catalytic efficiency. Finally, the most efficient binary nanostructures were successfully embedded in nanofibrous membranes by colloidal electrospinning and used in water remediation experiments in a flow-through reactor.

Ultralow Resistance Two-Stage Electrostatically Assisted Air Filtration by Polydopamine Coated PET Coarse Filter

Airborne particulate matters (PM) pose serious health threats to the population, and efficient filtration is needed for indoor and vehicular environments. However, there is an intrinsic conflict between filtration efficiency, air resistance, and service life. In this study, a two-stage electrostatically assisted air (EAA) filtration device is designed and the efficiency-air resistance-filter life envelope is significantly improved by a thin coating of polydopamine (PDA) on the polyethylene terephthalate (PET) coarse filter by in situ dopamine polymerization. The 8 mm thick EAA PDA-140@PET filter has a high filtration efficiency of 99.48% for 0.3 µm particles, low air resistance of 9.5 Pa at a filtration velocity of 0.4 m s^-1 , and steady performance up to 30 d. Compared with the bare PET filter, the penetration rate for 0.3 µm particles is lowered by 20×. The coated PDA is of submicron thickness, 10^-3  × the gap distance between filter fibers, so low air resistance could be maintained. The filter shows steadily high filtration efficiency and an acceptable increase of air resistance and holds nearly as many particles as its own weight in a 30 day long-term test. The working mechanism of the EAA coarse filter is investigated, and the materials design criteria are proposed.

Solvothermal Preparation of a Lanthanide Metal-Organic Framework for Highly Sensitive Discrimination of Nitrofurantoin and l-Tyrosine

Metal-organic frameworks (MOFs) have been rapidly developed for their broad applications in many different chemistry and materials fields. In this work, a multi-dentate building block 5-(4-(tetrazol-5-yl)phenyl)-isophthalic acid (H₃L) containing tetrazole and carbolxylate moieties was employed for the synthesis of a two-dimensional (2D) lanthanide MOF [La(HL)(DMF)₂(NO₃)] (DMF = N,N-dimethylformamide) (1) under solvothermal condition. The fluorescent sensing application of 1 was investigated. 1 exhibits high sensitivity recognition for antibiotic nitrofurantoin (K_sv: 3.0 × 10³ M⁻¹ and detection limit: 17.0 μM) and amino acid l-tyrosine (K_sv: 1.4 × 10⁴ M⁻¹ and detection limit: 3.6 μM). This work provides a feasible detection platform of 2D MOFs for highly sensitive discrimination of antibiotics and amino acids.

An Interface Optimization Strategy for g-C3N4-Based S-Scheme Heterojunction Photocatalysts

Graphitic carbon nitride (CN) has attracted much attention in photocatalytic fields due to its unique electronic band structure. However, the rapid recombination of photogenerated carriers severely inhibits its catalytic activity. The heterojunction structure has been widely confirmed to significantly improve the photocatalytic activity of CN through the formed interface structure. However, researchers often give attention to the band matching and conductivity of the cocatalyst, while the importance of the interface as a migration channel for photogenerated carriers is often overlooked. In this work, we adopt the strategy of morphology engineering to regulate the morphology of the CN photoactive component so as to achieve the interface optimization of the traditional heterojunction structure. The photocatalytic degradation experiment of rhodamine B shows that compared with the traditional CeO₂@CN heterojunction structure, the photocatalytic activity of the interface-optimized CeO₂/CN is increased by more than 20%. The following points could be used to explain the improvement of photocatalytic activity: (I) the formed S-scheme heterojunction structure, which inhibits the recombination of useful electrons and holes but expedites the recombination of relatively useless electrons and holes, (II) the increased interface area, which provides more carrier migration channels, and (III) the reduced interface contact resistance, which facilitates the separation and migration of photogenerated carriers. Furthermore, the interface optimization of the traditional Al₂O₃@CN and Fe₂O₃@CN heterojunction structures also achieved consistent results. This shows that the strategy in this work is a universal method for interface optimization, which provides potential alternative for further improving the catalytic activity of other heterojunction composites.

Disposable face masks and reusable face coverings as non-pharmaceutical interventions (NPIs) to prevent transmission of SARS-CoV-2 variants that cause coronavirus disease (COVID-19): Role of new sustainable NPI design innovations and predictive mathematical modelling

Best-published evidence supports the combined use of vaccines with non-pharmaceutical interventions (NPIs), to reduce the relative risk of contracting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that causes COVID-19; this will enable a safe transition to achieving herd immunity. Albeit complex, the strategic public health goal is to bundle NPIs to keep the basic reproduction number R₀ below one. However, validation of these NPIs is conducted using random clinical trials, which is challenging in a swiftly moving pandemic given the need for recruiting large participant cohort over a longitudinal analysis period. This review highlights emerging innovations for potentially improving the design, functionality and improved waste management of disposable face masks such as filtering facepiece (FFPs) respirators, medical masks, and reusable face coverings to help prevent COVID-19. It describes use of different mathematical models under varying scenarios to inform efficacy of single and combined use of NPIs as important counter-measures to break the cycle of COVID-19 infection including new SARS-CoV-2 variants. Demand for face masks during COVID-19 pandemic keeps increasing, especially for FFPs worn by medical workers. Collaborative and well-conducted randomised controlled trials across borders are required to generate robust data to inform common and consistent policies for COVID-19 and future pandemic planning and management; however, current use of systematic reviews of best available evidence can be considered to guide interim policies.

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Air filtration materials (AFMs) have gradually become a research hotspot on account of the increasing attention paid to the global air quality problem. However, most AFMs cannot balance the contradiction between high filtration efficiency and low pressure drop. Electrospinning nanofibers have a large surface area to volume ratio, an adjustable porous structure, and a simple preparation process that make them an appropriate candidate for filtration materials. Therefore, electrospun nanofibers have attracted increased attention in air filtration applications. In this paper, first, the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration are reviewed. Second, the research progress of EAFMs with multistructures, including nanoprotrusion, wrinkled, porous, branched, hollow, core-shell, ribbon, beaded, nets structure, and the application of these nanofibers in air filtration are summarized. Finally, challenges with the fabrication of EAFMs, limitations of their use, and trends for future developments are presented.

Controllable morphology of electrospun nanofiber membranes with tunable groove structure and the enhanced filtration performance for ultrafine particulates

As researchers are striving to develop high-performance filtration membranes with hierarchical micro/nano structures, the challenges and costs of processing often limit creative innovation. Here, we propose a polyethersulfone/polyacrylonitrile (PES/PAN) nanofiber membrane with groove structure by electrospinning and facile post-processing. The resulted membrane can form a groove structure on the surface of the fiber after being soaked in chloroform, thereby increasing the collision probability and extending the residence time for ultrafine particulates and improving the filtration efficiency. The groove structure can be attributed to the solubility of PES constituent in chloroform, while PAN constituent will not be dissolved, thus forming a high-performance nanofiber membrane with high filtration efficiency (ca. 99.54%) and withstand pressure drop (ca. 133.9 Pa) for dioctyl phthalate aerosol particles with diameter of 0.3μm. The results show that this convenient and low-cost fabrication technology can be used to prepare high-performance nanofiber membrane based air filters that have broad application prospects in respiratory protective equipment.

Electrospun Nanofiber Mats for Filtering Applications-Technology, Structure and Materials

Air pollution is one of the biggest health and environmental problems in the world and a huge threat to human health on a global scale. Due to the great impact of respiratory viral infections, chronic obstructive pulmonary disease, lung cancer, asthma, bronchitis, emphysema, lung disease, and heart disease, respiratory allergies are increasing significantly every year. Because of the special properties of electrospun nanofiber mats, e.g., large surface-to-volume ratio and low basis weight, uniform size, and nanoporous structure, nanofiber mats are the preferred choice for use in large-scale air filtration applications. In this review, we summarize the significant studies on electrospun nanofiber mats for filtration applications, present the electrospinning technology, show the structure and mechanism of air filtration. In addition, an overview of current air filtration materials derived from bio- and synthetic polymers and blends is provided. Apart from this, the use of biopolymers in filtration applications is still relatively new and this field is still under-researched. The application areas of air filtration materials are discussed here and future prospects are summarized in conclusion. In order to develop new effective filtration materials, it is necessary to understand the interaction between technology, materials, and filtration mechanisms, and this study was intended to contribute to this effort.

The Investigation of the Structure and Properties of Ozone-Sterilized Nonwoven Biopolymer Materials for Medical Applications

Nowadays, the development and research of nonwoven medical fibrous materials based on biopolymers is an area of a great practical interest. One of the most promising methods for producing nonwoven materials with a highly developed surface is electrospinning (ES). In this article, the possibility of efficient sterilization of ultrathin fibers based on polyhydroxybutyrate (PHB) by ozone treatment was considered. The purpose of this work was to select the most optimal morphology of nonwoven materials for medical purposes and to establish the correlation between the supramolecular structure and the physical properties of fibrous materials while under the influence of an ozone sterilization process.

Transition metal oxide and chalcogenide-based nanomaterials for antibacterial activities: an overview

A new battle line is drawn where antibiotic misuse and mismanagement have made treatment of bacterial infection a thorny issue. It is highly desirable to develop active antibacterial materials for bacterial control and destruction without drug resistance. A large amount of effort has been devoted to transition metal oxide and chalcogenide (TMO&C) nanomaterials as possible candidates owing to their unconventional physiochemical, electronic and optical properties and feasibility of functional architecture assembly. This review expounds multiple TMO&C-based strategies to combat pathogens, opening up new possibilities for the design of simple, yet highly effective systems that are crucial for antimicrobial treatment. A special emphasis is placed on the multiple mechanisms of these nanoagents, including mechanical rupture, photocatalytic/photothermal activity, Fenton-type reaction, nanozyme-assisted effect, released metal ions and the synergistic action of TMO&C in combination with other antibacterial agents. The applications of TMO&C nanomaterials mostly in air/water purification and wound healing along with their bactericidal activities and mechanisms are also described. Finally, the contemporary challenges and trends in the development of TMO&C-based antibacterial strategies are proposed.

Durable Superhydrophobic Wood via One-Step Immersion in Composite Silane Solution

A superhydrophobic coating endows pristine hydrophilic wood with excellent water/moisture repellency and thus prolongs its service life. Generally, the superhydrophobic coating on wood is fabricated by a two-step process in which the nanoparticles are first introduced onto the surface and then modified by low-surface-energy molecules. Herein, for the first time, we have fabricated the superhydrophobic wood via a one-step process free of nanoparticles by immersing the pristine hydrophilic wood, such as pine, balsawood, and basswood, into a composite silane solution of hexadecyltrimethoxysilane and methyltrimethoxysilane. The wood remains superhydrophobic or highly hydrophobic after long-term exposure to mechanical damage (such as abrading, knife-cutting, and tape-peeling), chemical damage (such as immersion in acid, alkali, or ethanol), and environmental impacting (such as UV irradiation and low/high-temperature exposure).

Laminated polyacrylonitrile nanofiber membrane codoped with boehmite nanoparticles for efficient electrostatic capture of particulate matters

Particulate matters (PMs) air pollution is identified as the major threat to public health and climate. High-performance air filter technology based on various electrospun nanofibers is considered as an effective strategy to eliminate the effects of PMs air pollution. However, to date, nearly all the existing micro-/nanofibers are hard to meet both requirements of high PMs removal efficiency and long service life. In this work, we reported the production of laminated polyacrylonitrile(PAN)-boehmite nanoparticles (BNPs) nanofiber structured membrane by the electrospinning process. The dimension of PAN-BNPs nanofiber can be tunable from (0.09 ± 0.03)μm to (0.81 ± 0.11)μm by controlling the PAN and BNPs concentrations in precursors. The optimized PAN-BNPs nanofiber air filter with a basis weight of 1 g m^-2demonstrates the attractive attributes of high PM_2.5removal efficiency up to 99.962% and low pressure drop of 58 Pa. Most importantly, after introducing the BNPs as electret, the removal efficiency is very stable under the air flow rate of 6 l min^-1. This PAN-BNPs nanofiber with a long electrostatic duration time offers an approach for fabricating future high-performance air filters.

Solvothermal preparation of luminescent zinc(II) and cadmium(II) coordination complexes based on the new bi-functional building block and photo-luminescent sensing for Cu2+, Al3+ and L-lysine

In industry, over usage of Cu²⁺ and Al³⁺ will lead to toxic wastewater, which further to give serious pollution for the environment. On the other hand, L-lysine can enhance serotonin release in the amygdala, with subsequent changes in psychobehavioral responses to stress. Therefore it is the urgent problem to design a method for detecting the amount of Cu²⁺, Al³⁺, and L-lysine. In this work, through the solvothermal synthesis method, two new coordination complexes based on the new bifunctional building block 4'-(1H-1,2,4-triazole-1-yl)- [1,1'-biphenyl]-4-carboxylic acid (HL) have been synthesized, namely, [Zn(L)₂·4H₂O] (complex 1) and [Cd(L)₂·4H₂O] (complex 2). X-ray single-crystal diffractometer was used to analyze its structure, powder X-ray diffraction (PXRD) patterns confirmed that 1 and 2 powder's purity and 1 can keep stable during the detection process of Cu²⁺, Al³⁺, and L-lysine, respectively. Elemental analysis, thermogravimetric analysis, infrared analysis, ultraviolet analysis and fluorescent spectrum have been used to characterize these complexes. The photo-luminescent test showed that 1 can accurately recognize Al³⁺ and Cu²⁺ among various cations. On the other hand, 1 can distinguish L-lysine among amino acid molecules. Therefore, 1 can be utilized as a multifunctional fluorescent probe for Al³⁺(K_sv = 1.5570 × 10⁴ [M]^-1), Cu²⁺(K_sv = 1.4948 × 10⁴ [M]^-1) and L-lysine (K_sv = 4.9118 × 10⁴ [M]^-1) with low detection limits (17.5 μM, 18.2 μM, 5.6 μM) respectively.

Effect on thermal stability of microstructure and morphology of thermally-modified electrospun fibers of polybenzoxazines (PBz) blended with sulfur copolymers (SDIB)

Simple modification by thermal treatment is the commonly used approach to enhance the performance of electrospun fibers. This was investigated in the thermal treatment of polybenzoxazine (PBz) fibers blended with sulfur copolymers (SDIB) to determine the effect of varying treatment conditions on the microstructure and morphology of PBz fibers with the effect of incorporating sulfur functional groups on resulting properties. Mechanical properties of PBz are greatly improved by thermally-induced ring-opening polymerization (ROP) of the oxazine ring. Blending with sulfur copolymers (SDIB) could have beneficial effects on endowed features on fibers but could also affect the resulting properties of SDIB-blended PBz fibers during crosslinking reactions. Fiber mats were fabricated by electrospinning of PBz (10 wt%) blended with SDIB (10 wt%). Physical modification with varying conditions of sequential thermal treatment were evaluated and compared to the conditions applied on pristine PBz fibers. Changes in morphology and microstructure of fibers after modification were analyzed through scanning electron microscopy (SEM) while elemental compositions were identified after varying the conditions of thermal treatment. Adjustment of treatment conditions using two-step temperature sequential thermal treatment with higher temperatures of 160 °C and 240 °C showed significant changes in microstructure and morphology of fibers. Lower temperatures of 120 °C and 160 °C exhibited microstructure and morphology of fibers which affected the fiber diameter and fiber networks. Cross-sectional SEM images also confirmed the adversed effect of high-temperature treatment conditions on fibrous structures while low-temperature treatment retained the fibrous structures with more compact and stiff fiber networks. SDIB-blended PBz fibers were also evaluated by TGA and DSC to correlate the changes in structure and morphology with the thermal stability and integrity of blended SDIB/PBz fibers as compared to pristine PBz with the effect of change in treatment conditions. Fiber strength indicated slower weight loss for blended fibers and higher onset temperature of degradation which resulted in more thermally stable fibers.

Green preparation of polyvinylidene fluoride loose nanofiltration hollow fiber membranes with multilayer structure for treating textile wastewater

In this work, polyvinylidene fluoride (PVDF) loose nanofiltration (NF) hollow fiber membranes with multilayer structure were prepared successfully based on a solvent-free process. Graphene oxide (GO) was used to cover the interface pores of the pristine PVDF membranes via vacuum filtration, and polypyrrole (PPy) was polymerized on the surface to further decorate the membrane structure. Interestingly, the modified membranes exhibited a multilayer structure due to synergistic effect of GO and PPy. The structure and property of PVDF loose NF membranes were investigated in detail. After modifying by GO and PPy, the hydrophilicity improved obviously. Moreover, the molecular weight cut off (MWCO) was about 3580 Da, and the smallest pore size of skin layer decreased to 2.5-4 nm. Furthermore, the PVDF loose NF hollow fiber membranes presented a high dye rejection (˃98.5%) for negative dyes, whereas a low salt rejection for NaCl (about 4%), showing a great potential for separating dye/salt accurately. Specifically, there were not any solvent used in all the preparation processes. The work offered a novel strategy for green preparation of loose NF membranes.

The Role of Electrospun Nanomaterials in the Future of Energy and Environment

Electrospinning is one of the most successful and efficient techniques for the fabrication of one-dimensional nanofibrous materials as they have widely been utilized in multiple application fields due to their intrinsic properties like high porosity, large surface area, good connectivity, wettability, and ease of fabrication from various materials. Together with current trends on energy conservation and environment remediation, a number of researchers have focused on the applications of nanofibers and their composites in this field as they have achieved some key results along the way with multiple materials and designs. In this review, recent advances on the application of nanofibers in the areas-including energy conversion, energy storage, and environmental aspects-are summarized with an outlook on their materials and structural designs. Also, this will provide a detailed overview on the future directions of demanding energy and environment fields.

Antibacterial and antibiofilm properties of graphene and its derivatives

Infections resulting from bacteria and biofilms have become a huge problem threatening human health. In recent years, the antibacterial and antibiofilm effects of graphene and its derivatives have been extensively studied. However, there continues to be some controversy over whether graphene and its derivatives can resist infection and biofilms. Moreover, the antibacterial mechanism and cytotoxicity of graphene and its derivatives are unclear. In the present review, antibacterial and antibiofilm abilities of graphene and its derivatives in solution, on the surface are reviewed, and their toxicity and possible mechanisms are also reviewed. Furthermore, we propose possible future development directions for graphene and its derivatives in antibacterial and antibiofilm applications.

Green-Solvent-Processed Fibrous Membranes with Water/Oil/Dust-Resistant and Breathable Performances for Protective Textiles

Waterproof and breathable membranes (WBMs) are highly demanded worldwide due to their promising applications in outdoor protective clothing, medical hygiene, and electronic devices. However, the design of such materials integrated with environmental friendliness and high functionality has been considered a long-standing challenge. Herein, we report the green-solvent-processed polyamide fibrous membranes with amphiphobicity and bonding structure via ethanol-based electrospinning and water-based impregnating techniques, endowing the fibrous membranes with outstanding water/oil/dust-resistant and good breathable properties. The developed green smart fibrous membranes exhibit integrated properties with robust water and oil intrusion pressures of 101.2 and 32.4 kPa, respectively, excellent dust removal efficiency of above 99.9%, good water vapor transmission rate of 11.2 kg m^-2 d^-1, air permeability of 2.6 mm s^-1, tensile strength of 15.6 MPa, and strong toughness of 22.8 MJ m^-3, enabling the membranes to protect human beings and electronic devices effectively. This work may shed light on designing the next generation green smart fibrous WBMs for protective textiles.

The Mechanical Properties of PVC Nanofiber Mats Obtained by Electrospinning

This paper investigates the mechanical properties of oriented polyvinyl chloride (PVC) nanofiber mats, which, were obtained by electrospinning a PVC solution. PVC was dissolved in a solvent mixture of tetrahydrofuran/dimethylformamide. Electrospinning parameters used in our work were, voltage 20 kV; flow rate 0.5 mL/h; the distance between the syringe tip and collector was 15 cm. The rotating speed of the drum collector was varied from 500 to 2500 rpm with a range of 500 rpm. Nanofiber mats were characterized by scanning electron microscope, thermogravimetric analysis, differential scanning calorimetry methods. The mechanical properties of PVC nanofiber mats, such as tensile strength, Young’s modulus, thermal degradation, and glass transition temperature were also analyzed. It was shown that, by increasing the collector’s rotation speed from 0 (flat plate collector) to 2500 rpm (drum collector), the average diameter of PVC nanofibers decreased from 313 ± 52 to 229 ± 47 nm. At the same time, it was observed that the mechanical properties of the resulting nanofiber mats were improved: tensile strength increased from 2.2 ± 0.2 MPa to 9.1 ± 0.3 MPa, Young’s modulus from 53 ± 14 to 308 ± 19 MPa. Thermogravimetric analysis measurements showed that there was no difference in the process of thermal degradation of nanofiber mats and PVC powders. On the other hand, the glass transition temperature of nanofiber mats and powders did show different values, such values were 77.5 °C and 83.2 °C, respectively.

Post Processing Strategies for the Enhancement of Mechanical Properties of ENMs (Electrospun Nanofibrous Membranes): A Review

Electrospinning is a versatile technique which results in the formation of a fine web of fibers. The mechanical properties of electrospun fibers depend on the choice of solution constituents, processing parameters, environmental conditions, and collector design. Once electrospun, the fibrous web has little mechanical integrity and needs post fabrication treatments for enhancing its mechanical properties. The treatment strategies include both the chemical and physical techniques. The effect of these post fabrication treatments on the properties of electrospun membranes can be assessed through either conducting tests on extracted single fiber specimens or macro scale testing on membrane specimens. The latter scenario is more common in the literature due to its simplicity and low cost. In this review, a detailed literature survey of post fabrication strength enhancement strategies adopted for electrospun membranes has been presented. For optimum effect, enhancement strategies have to be implemented without significant loss to fiber morphology even though fiber diameters, porosity, and pore tortuosity are usually affected. A discussion of these treatments on fiber crystallinity, diameters, and mechanical properties has also been produced. The choice of a particular post fabrication strength enhancement strategy is dictated by the application area intended for the membrane system and permissible changes to the initial fibrous morphology.