Cranberry Beans Derived Carbon Dots as a Potential Fluorescence Sensor for Selective Detection of Fe3+ Ions in Aqueous Solution

Catalytic degradation of methylene blue using iron and nitrogen-containing carbon dots as Fenton-like catalysts

Carbon dots were modified with iron and nitrogen groups to produce specific surface groups and charge which demonstrated high efficiency for the Fenton-like degradation of methylene blue whilst markedly minimising its effluent toxicity.

Utilization of waste biomass of Poa pratensis for green synthesis of n-doped carbon dots and its application in detection of Mn2+ and Fe3

In this study, a novel and sustainable approach was used to synthesize nitrogen-doped carbon dots (NCDs) from the waste biomass of Poa Pratensis (Kentucky bluegrass (KB)) by a facile hydrothermal method. The prepared KBNCDs were subjected to various characterization techniques, including X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and Fourier-transform infrared spectroscopy to verify the formation of carbon dots and their surface functional groups. The KBNCDs exhibited good hydrophilic fluorescence (FLU) properties with an acceptable quantum yield (7%). The synthesized KBNCDs showed excitation wavelength-dependent FLU emission behavior with strong cyan-blue FLU upon irradiation with 365 nm UV-light. The hydrophilic optical properties of the as-synthesized KBNCDs were used to detect Fe³⁺ and Mn²⁺ ions in an aqueous medium with good selectivity and sensitivity. It was found that the FLU of the KBNCDs is quenched in the presence of Fe³⁺ and Mn²⁺ ions, and the quenching rate was linear with the concentration of Fe³⁺ and Mn²⁺ ions. The limit of detection (LOD) of KBNCDs with metal ions was calculated using the Stern-Volmer relationship. The LOD values for Fe³⁺ or Mn²⁺ ions were calculated as 1.4 and 1.2 μM, respectively with the detection range from 5.0 to 25 μM. Based on these results, this study provides an underpinning for the development of KBNCD as FLU sensors that can be used in aqueous media.

Boron doped Fluorescent Carbon Nano Dots for reduction of ionic dyes and as Encryption and decryption QR code labels

This work discusses the synthesis of fluorescent undoped and boron-doped carbon nanodots (BDCNDs) by a simple hydrothermal approach using Tribulus terretris as carbon precursor and boric acid as boron source....

Natural Carbon Nanodots: Toxicity Assessment and Theranostic Biological Application

This review outlines the methods for preparing carbon dots (CDs) from various natural resources to select the process to produce CDs with the best biological application efficacy. The oxidative activity of CDs mainly involves photo-induced cell damage and the destruction of biofilm matrices through the production of reactive oxygen species (ROS), thereby causing cell auto-apoptosis. Recent research has found that CDs derived from organic carbon sources can treat cancer cells as effectively as conventional drugs without causing damage to normal cells. CDs obtained by heating a natural carbon source inherit properties similar to the carbon source from which they are derived. Importantly, these characteristics can be exploited to perform non-invasive targeted therapy on human cancers, avoiding the harm caused to the human body by conventional treatments. CDs are attractive for large-scale clinical applications. Water, herbs, plants, and probiotics are ideal carbon-containing sources that can be used to synthesize therapeutic and diagnostic CDs that have become the focus of attention due to their excellent light stability, fluorescence, good biocompatibility, and low toxicity. They can be applied as biosensors, bioimaging, diagnosis, and treatment applications. These advantages make CDs attractive for large-scale clinical application, providing new technologies and methods for disease occurrence, diagnosis, and treatment research.

Highly Fluorescent Carbon Dots as a Potential Fluorescence Probe for Selective Sensing of Ferric Ions in Aqueous Solution

This paper’s emphasis is on the development of a fluorescent chemosensor for Fe3+ ions in an aqueous solution, using hydrophilic carbon dots (O-CDs). A simple, cost-effective, and environmentally friendly one-step hydrothermal synthesis method was used to synthesize fluorescent hydrophilic O-CDs from Oxalis corniculata (Family; Oxalidaceae). The graphitic structure and size distribution of the O-CDs was verified by X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy studies. The resulting O-CDs had a near-spherical shape and an adequate degree of graphitization at the core, with an average diameter of 4.5 nm. X-ray photoelectron and Fourier transform infrared spectroscopy methods revealed the presence of several hydrophilic groups (carbonyl, amine, carboxyl, and hydroxyl, along with nitrogen and oxygen-rich molecules) on the surface of O-CDs. The synthesized hydrophilic O-CDs with excitation wavelength-dependent emission fluorescence characteristics showed a high quantum yield of about 20%. Besides this, the hydrophilic O-CDs exhibited a bright and controllable fluorescence with prolonged stability and photo-stability. These fluorescent hydrophilic O-CDs were used as a nanoprobe for the fluorometric identification of Fe3+ ions in an aqueous solution, with high sensitivity and selectivity. By quenching the blue emission fluorescence of this nanosensor, a highly sensitive Fe3+ ion in the range of 10–50 µM with a minimum detection limit of 0.73 µM was achieved. In addition, the developed nanosensor can be used to sense intracellular Fe3+ ions with high biocompatibility and cellular imaging capacity, and it has a lot of potential in biomedical applications.

Biomass-derived carbon quantum dots: a novel and sustainable fluorescent "ON-OFF-ON" sensor for ferric ions

Fluorescent carbon dot sensing probes have attracted much attention in recent times due to their amazing properties regarding chemical inertness, solubility, non-toxicity, optoelectronic behavior, and charge transport functionality. Herein, we report the green synthesis of lotus stem-derived carbon dots (LS-CQDs) from the naturally available lotus stem by a simple and economical hydrothermal method without the use of an oxidizing agent. HR-TEM and DLS measurements confirm the quasi-spherical shaped LS-CQDs, with a 2.5 nm average diameter. The LS-CQDs possess better aqueous dispersibility and stability due to the presence of hydrophilic hydroxyl, carboxyl, and amine surface functional groups, as manifested by FT-IR analysis. The LS-CQDs demonstrate excellent fluorescence properties that are sensitive to conditions of pH, time, and temperature. Furthermore, the prepared LS-CQDs display an interesting fluorescence "ON-OFF-ON" property. The LS-CQDs depict a selective and sensitive fluorescence quenching response in the presence of ferric ions. Moreover, the prepared LS-CQDs exhibit a quantum yield of about 0.44%. The LS-CQDs show an excellent sensing response with the limit of detection (LOD) equal to 0.212 ppm. The promising sensitivity and selectivity of LS-CQDs were utilized for the detection of ferric ions in the water samples collected from three polluted sources viz. lake water (Dal lake), underground water (tube well), and stream water. For all the collected water samples the results were reasonably good with the achievement of recovery factor above 1. Therefore, we strongly believe that the present study will serve as a good guiding star for the selective and sensitive detection of ferric ions from various polluted water bodies.

Upcycling of exhausted reverse osmosis membranes into value-added pyrolysis products and carbon dots

Polymeric reverse osmosis (RO) membranes are widely used worldwide for production of fresh water from various sources, primarily ocean desalination. However, with limited service life, exhausted RO membrane modules often end up as plastic wastes disposed of predominantly by landfilling. It is imperative to find a feasible way to upcycle end-of-life RO membrane modules into valuable products. In this paper, the feasibility of RO membrane recycling via pyrolysis and subsequent conversion of resulting char into carbon dots (CDs) through H₂O₂-assisted hydrothermal method was investigated. RO membrane module pyrolysis at 600 °C produced oil (28 wt%), non-condensable gas (17 wt%), and char (22 wt%). While oil and gas can serve as fuel and chemical feedstock due to rich hydrocarbon content, char was found a suitable precursor for the synthesis of functional CDs. The resulting CDs doped with N (4.8%) and S (1.8%) exhibited excellent water dispersibility, narrow size distribution of 1.3-6.8 nm, high stability, and strong blue fluorescence with a quantum yield of 6.24%. CDs demonstrated high selectivity and sensitivity towards Fe³⁺ in the range of 0-100 μM with the limit of detection of 2.97 μM and were capable of determining Fe³⁺ in real water samples (tap water and pond water).

Carbon Dot/Polymer Composites with Various Precursors and Their Sensing Applications: A Review

Carbon dots (CDs) have generated much interest because of their significant fluorescence (FL) properties, extraordinary photophysical attributes, and long-term colloidal stability. CDs have been regarded as a prospective carbon nanomaterial for various sensing applications because of their low toxicity, strong and broad optical absorption, high chemical stability, rapid transfer properties, and easy modification. To improve their functionality, CD/polymer composites have been developed by integrating polymers into CDs. CD/polymer composites have diversified because of their easy preparation and applications in sensing, optoelectronics, semiconductors, molecular delivery, and various commercial fields. Many review articles are available regarding the preparation and applications of CDs. Some review articles describing the production and multiple applications of the composites are available. However, no such article has focused on the types of precursors, optical properties, coating characteristics, and specific sensing applications of CD/polymer composites. This review aimed to highlight and summarize the current progress of CD/polymer composites in the last five years (2017–2021). First, we overview the precursors used for deriving CDs and CD/polymer composites, synthesis methods for preparing CDs and CD/polymer composites, and the optical properties (absorbance, FL, emission color, and quantum yield) and coating characteristics of the composites. Most carbon and polymer precursors were dominated by synthetic precursors, with citric acid and polyvinyl alcohol widely utilized as carbon and polymer precursors, respectively. Hydrothermal treatment for CDs and interfacial polymerization for CDs/polymers were frequently performed. The optical properties of CDs and CD/polymer composites were almost identical, denoting that the optical characters of CDs were well-maintained in the composites. Then, the chemical, biological, and physical sensing applications of CD/polymer composites are categorized and discussed. The CD/polymer composites showed good performance as chemical, biological, and physical sensors for numerous targets based on FL quenching efficiency. Finally, remaining challenges and future perspectives for CD/polymer composites are provided.

Preparation of Multifunctional N-Doped Carbon Quantum Dots from Citrus clementina Peel: Investigating Targeted Pharmacological Activities and the Potential Application for Fe3+ Sensing

Carbon quantum dots (CQDs) have recently emerged as innovative theranostic nanomaterials, enabling fast and effective diagnosis and treatment. In this study, a facile hydrothermal approach for N-doped biomass-derived CQDs preparation from Citrus clementina peel and amino acids glycine (Gly) and arginine (Arg) has been presented. The gradual increase in the N-dopant (amino acids) nitrogen content increased the quantum yield of synthesized CQDs. The prepared CQDs exhibited good biocompatibility, stability in aqueous, and high ionic strength media, similar optical properties, while differences were observed regarding the structural and chemical diversity, and biological and antioxidant activity. The antiproliferative effect of CQD@Gly against pancreatic cancer cell lines (CFPAC-1) was observed. At the same time, CQD@Arg has demonstrated the highest quantum yield and antioxidant activity by DPPH scavenging radical method of 81.39 ± 0.39% and has been further used for the ion sensing and cellular imaging of cancer cells. The obtained results have demonstrated selective response toward Fe³⁺ detection, with linear response ranging from 7.0 µmol dm⁻³ to 50.0 µmol dm⁻³ with R² = 0.9931 and limit of detection (LOD) of 4.57 ± 0.27 µmol dm⁻³. This research could be a good example of sustainable biomass waste utilization with potential for biomedical analysis and ion sensing applications.

Green Route for the Synthesis of Fluorescent Carbon Nanoparticles from Circassian Seeds for Fe(III) Ion Detection

A facile and green strategy was carried out for the preparation of fluorescent carbon nanoparticles (CNp) using non-toxic circassian seeds as carbon precursor (CNp, named ACNp). The surface of amorphous ACNp is latched with different surface moieties such as hydroxyl, carbonyl, ether and amino groups and it is confirmed by FTIR and XPS. These functionalities provide high solubility and stability to ACNp in aqueous medium. The surface of ACNp is highly negatively charged due to the presence of oxygen rich functional groups and it is confirmed by zeta potential. A reasonably good quantum yield (QY) of 5.1% is obtained for ACNp compared to other CNp derived from bioprecursors without any surface passivation. Circassian seeds are self sufficient for the synthesis of N doped CNp. The excitation dependent fluorescence property of ACNp is invariant under ionic and thermal environments. They exhibit good selectivity towards Fe³⁺ ions via static quenching mechanism with detection limit of 32.7 µM.

An Overview of the Recent Developments in Carbon Quantum Dots—Promising Nanomaterials for Metal Ion Detection and (Bio)Molecule Sensing

The fluorescent carbon quantum dots (CQDs) represent an emerging subset of carbonaceous nanomaterials, recently becoming a powerful tool for biosensing, bioimaging, and drug and gene delivery. In general, carbon dots are defined as zero-dimensional (0D), spherical-like nanoparticles with <10 nm in size. Their unique chemical, optical, and electronic properties make CQDs versatile materials for a wide spectrum of applications, mainly for the sensing and biomedical purposes. Due to their good biocompatibility, water solubility, and relatively facile modification, these novel materials have attracted tremendous interest in recent years, which is especially important for nanotechnology and nanoscience expertise. The preparation of the biomass-derived CQDs has attracted growing interest recently due to their low-cost, renewable, and green biomass resources, presenting also the variability of possible modification for the enhancement of CQDs’ properties. This review is primarily focused on the recent developments in carbon dots and their application in the sensing of different chemical species within the last five years. Furthermore, special emphasis has been made regarding the green approaches for obtaining CQDs and nanomaterial characterization toward better understanding the mechanisms of photoluminescent behavior and sensing performance. In addition, some of the challenges and future outlooks in CQDs research have been briefly outlined.

Nitrogen-doped carbon dots for sensitive detection of ferric ions and monohydrogen phosphate by the naked eye and imaging in living cells

Nitrogen doped carbon dots (N-CDs) have been prepared via a one-pot hydrothermal method by using formamide and o-phenylenediamine as the carbon precursors. The as-fabricated N-CDs display excellent water dispersibility, good biocompatibility and anti-photobleaching properties. A strong emission band with an emission maximum (λ ^fl _max) of 556 nm is observed under 450 nm excitation, and a large Stokes shift of 106 nm is presented. However, the fluorescence is quenched by the addition of Fe³⁺; a good linearity is shown in the range of 0-65 μM with a detection limit as low as 0.85 μM. Fortunately, the quenched fluorescence could be recovered rapidly by the addition of monohydrogen phosphate (HPO₄ ^2-) due to the formation of the stable [N-CDs-Fe³⁺-HPO₄ ^2-] complex, and a good linearity is exhibited in the range of 0-60 μM with a low detection limit of 0.80 μM for HPO₄ ^2-. A novel "on-off-on" fluorescence response is seen with an obvious color change from yellow-crimson-yellow by the naked eye. In addition, the confocal microscopy images suggest that the as-synthesized N-CDs could serve as a sensitive nanosensor for Fe³⁺ and HPO₄ ^2- detection, implying the diverse potential application of N-CDs in the biomedical field.

Fluorescence quenching mechanism and the application of green carbon nanodots in the detection of heavy metal ions: a review

This review article highlights the quenching mechanism and applications of green CNDs for the detection of metal ions.

Nanomolar level detection of metal ions by improving the monodispersity and stability of nitrogen-doped graphene quantum dots

Highly fluorescent and stable nitrogen-doped graphene quantum dots used as nanosensor for the selective and sensitive detection of Fe3+ ions at nanomolar range based on the dynamic quenching.

Synthesis, characterization and biocompatibility studies of carbon quantum dots from Phoenix dactylifera

In the present study, Carbon Quantum Dots (CQDs) were synthesized from Phoenix dactylifera (Date palm fruit) using microwave-assisted pyrolysis and were characterized for its various properties. The synthesized CQD sample exhibited a narrow absorbance peak at 270 nm in UV-Vis spectrum that indicated generation of narrow sized particles. The FTIR analysis of the crude CQDs and dialysed sample revealed the various functional groups involved in the formation of CQDs. TEM data revealed the nature of CQDs to be quasi-spherical and spatially distributed. Biocompatibility of the CQDs was studied using various model systems. CQDs displayed no cytotoxic and anti-clonogenic property when exposed to WRL-68 cell line whereas a slight toxicity was evident in HT1080 post 24 h of incubation suggesting the tremendous potential of the CQDs in the synergistic killing of cancer cells. Phytotoxicity assessment in four different seedlings revealed the non-toxic nature of CQDs. Further these CQDs were found to possess high biocompatibility imposing no inhibition in microbial growth and zilch effect on the development of zebrafish embryos. Thus these CQDs can find immense potential applications in fields of biomedicine as biomolecule detection, drug carriers, fluorescent tracers and in controlling the drug release.

On-off Fluorescent Switching of Excitation-independent Near-ultraviolet Emission Carbon Nanobelts for Ultrasensitive Detection Nimesulide in Pharmaceutical Tablet

Here, we present an excellent strategy of unmodified near-ultraviolet fluorescence nitrogen doping carbon nanobelts (NFNCBs) for detecting nimesulide (Nim). After a simple hydrothermal process of uric acid and hydroquinone in DMF solvent, NFNCBs shows the shape of corroded stalactite-like composed of nanobelts aggregates, near-ultraviolet luminescence and a narrowed full width at half maximum. This could improve/change the electronic properties and surface chemical active site, as the result of a sensitive response to Nim. By employing this sensor, the quantitative measurement displays a linear range of 2.0 nM - 100.0 μM with a lower detection limit of 0.21 nM (3σ/k) for Nim. Our work has provided a high selectivity for Nim, which may be capable for pharmaceutical sample analysis in real tablets. Furthermore, the results concerning the recoveries (96.3 - 106.2%) for real sample analysis indicate that this nanoprobe might expand a good avenue to design an effective luminescence nanoprobe for other biologically related drugs.

Carbon Dots for Forensic Applications: A Critical Review

Owing to their superior fluorescence performance, inexpensive synthesis and nontoxic nature, carbon dots (C-dots) are systematically explored in a variety of applications; in this review, we outline and critically discuss recent trends with respect to their potential exploitation in criminal investigation, forensic toxicology and anti-counterfeit interventions. Capitalising on their colour-tuneable behaviour (in the sense that they adopt different colours with respect to the incident radiation), C-dot-based compositions are ideal for the visual enhancement of latent fingerprints, affording improved contrast against multicoloured and patterned backgrounds. As highly sensitive and highly selective optical nanoprobes, C-dots show excellent analytical performance in detecting biological compounds, drugs, explosives, heavy metals and poisonous reactants. In addition, benefiting from their versatile structural and chemical composition, C-dots can be incorporated into ink and polymeric formulations capable of functioning as a new generation of cost-effective barcodes and security nanotags for object authentication and anti-counterfeit applications. Translating these encouraging research outcomes into real-life innovations with significant social and economic impact requires an open, multidisciplinary approach and a close synergy between materials scientists, biologists, forensic investigators and digital engineers.

Fluorescent recognition of Fe3+ in acidic environment by enhanced-quantum yield N-doped carbon dots: optimization of variables using central composite design

A versatile synthetic approach for development of highly fluorescent nitrogen-doped carbon dots (N-CDs) from carboxymethylcellulose in the presence of linear polyethyleneimine (LPEI) has been developed. According to single factor method, central composite design incorporated with response surface methodology matrix was applied to find and model optimal conditions for the temperature (220-260 °C), duration (1-3 h) and LPEI weight (0.5-1.5%). The statistical results show that duration was the most significant parameter for efficient carbonization conversion rate in comparison with temperature and LPEI weight. The reduced cubic model (R2 = 0.9993) shows a good correlation between the experimental data and predicted values. The optimal variables were temperature of 260 °C, duration of 2 h and LPEI weight of 1%. Under these conditions, quantum yield of up to 44% was obtained. The numerically optimized N-CDs have an average size of 3.4 nm with graphitic nature owing to the abundant amino species incorporated into the carbon core framework. The blue-green N-CDs possess emission dependent upon the solvent polarity, wide pH stability with enhanced emission in an acidic environment. Impressively, the N-CDs show long-shelf-life for up to 1 year with no noticeable precipitation. The N-CDs were able to recognize a high concentration of Fe3+ ions with a detection limit of 0.14 μM in acidic solution owing to the special coordination for Fe3+ to be captured by electron-donating oxygen/ amino groups around N-CDs. Moreover, the N-CDs can also be used as a new kind of fluorescent ink for imaging applications.

Utilization of Carbon Dots Derived from Volvariella volvacea Mushroom for a Highly Sensitive Detection of Fe3+ and Pb2+ Ions in Aqueous Solutions

In this study, Volvariella volvacea (VV) mushroom was utilized as a green carbon precursor to synthesize carbon dots (CDs) and applied as a fluorescent (FL) sensor to detect Fe3+ and Pb2+ ions. The VV-CDs showed a high photostability and FL properties with a quantum yield of about 11.5%. The VV-CDs exhibited an excitation-dependent emission manner, with an optimum emission wavelength at 440 nm excited at 360 nm. The VV-CDs were evaluated and shown to be facile and effective FL sensors for detecting Pb2+ and Fe3+ ions based on the FL quenching efficiency, demonstrating the special complex chelate between the metal ions and effective surface functional groups of VV-CDs. VV-CDs displayed high responses to Fe3+ and Pb2+ ions, with the linear relationship of 1-100 μM and limits of detection (LODs) of 12 and 16 nM for Pb2+ and Fe3+ ions, respectively. Furthermore, the FL sensor was validated with real water samples, showing very good spike recoveries.

Plant Part-Derived Carbon Dots for Biosensing

Carbon dots (CDs) are a new cluster of carbon atoms with particle size less than 10 nm. CDs also exhibit interesting fluorescence (FL) properties. CDs are attractive because of their fascinating characteristics including low toxicity, good water solubility, and tremendous biocompatibility. Recently, CDs have been investigated as biosensors for numerous target analytes. Meanwhile, the utilization of cheap and renewable natural resources not only fulfills the pressing requirement for the large-scale synthesis of CDs but also encourages the establishment of sustainable applications. The preparation of CDs using natural resources, i.e., plants, offers several advantages as it is inexpensive, eco-friendly, and highly available in the surroundings. Plant parts are readily available natural resources as the starting materials to produce CDs with different characteristics and attractive applications. Several review articles are now available covering the synthesis, properties, and applications of CDs. However, there is no specific and focused review literature discussing plant part-derived CDs for biosensing applications. To handle this gap, we provide a review of the progress of CDs derived from various plant parts with their synthesis methods, optical properties, and biosensing applications in the last five years. We highlight the synthesis methods and then give an overview of their optical properties and applications as biosensors for various biomolecules and molecules in biological samples. Finally, we discuss some future perspectives for plant part-derived CDs for better material development and applications.

Glutathione-capped Syzygium cumini carbon dot-amalgamated agarose hydrogel film for naked-eye detection of heavy metal ions

Development of a facile and sensitive analytical tool for the detection of heavy metal ions is still a challenging task because of interference from other chemical species. In this work, glutathione (GSH)-capped Syzygium cumini carbon dots (CDs) have been integrated with agarose hydrogel film and used as an amalgamated solid probe for sensing of different metal ions (Pb2+, Fe3+, and Mn2+). The synthesis of a solid sensing platform is based on the electrostatic interactions between GSH-capped Syzygium cumini CDs and agarose hydrogel. The developed hydrogel-based solid probe exhibited good linearities with the concentration ranges of metal ions from 0.005 to 0.075, 0.0075 to 0.1, and 0.0075 to 0.1 mM with detection limits of 1.3, 2.5, and 2.1 μM for Pb2+, Fe3+, and Mn2+ ions, respectively.

Fluorescent carbon quantum dots synthesized using phenylalanine and citric acid for selective detection of Fe3+ ions

A facile, economical and one-step hydrothermal method was used to synthesize fluorescent carbon dots by utilizing citric acid as carbon source and phenylalanine to provide nitrogen. The as-prepared fluorescence carbon dots had strong blue light emission around 440 nm. As confirmed by UVvis absorption, X-ray photoelectron spectroscopic, Fourier transform infrared spectroscopy and transmission electron microscope characterization, the carbon dots were small and very stable in water for using as a fluorescent probe. It was also found that the fluorescence of the carbon dots could be quenched in the presence of Fe³⁺ ions, and the quenching rate was linear with the concentration of Fe³⁺ ions. We here proposed a static quenching mechanism about the fluorescence of the Phe-CDs could be selectively quenched by Fe³⁺ ions, which was because these Fe³⁺ ions could easily combine with the hydroxyl or carboxyl groups on the surface of Phe-CDs and induced aggregation. In addition, the pH had little effect on the fluorescence intensity of the Phe-CDs and maintained excellent fluorescence intensity even under extreme pH value conditions and could be used for the detection of Fe³⁺ ions. We have demonstrated that the method using the carbon dots for Fe³⁺ ions detection was rapid, reliable, and selective with a detection limit as low as 0.720 μM and a dynamic range from 5.0 to 500.0 μM. Moreover, the results of determination Fe³⁺ ions in tap water samples indicated that the presented method has potential for practical application in environmental metal analysis.

A fluorescent sensor based on oyster mushroom-carbon dots for sensing nitroarenes in aqueous solutions

The synthesis of OM-CDs and their sensing application for NAs.

Nitrogen-Doped Carbon Dots from Averrhoa carambola Fruit Extract as a Fluorescent Probe for Methyl Orange

In this study, a simple and green hydrothermal treatment was performed to prepare nitrogen-doped carbon dots (NCDs) from Averrhoa carambola (AC) fruit extract as a carbon precursor and L-arginine (Arg) as a nitrogen dopant. The AC-NCDs were characterized by UV light, fluorescence spectroscopy, transmission electron microscopy, FTIR spectroscopy, Raman spectroscopy, UV-vis spectroscopy, and zeta potential analyzer. The AC-NCDs were spherical and the average diameter was estimated to be 6.67 nm. The AC-NCDs exhibited the maximum emission intensity at 446 nm with 360 nm excitation wavelength. The fluorescence quenching behavior of AC-NCDs after interacting with methyl orange (MO) dye was studied. The interaction of AC-NCDs and MO was achieved within 3 min and the fluorescence quenching was maintained to a fixed value even after 30 min. The linearity was obtained in the range of 1 to 25 μM MO with a 0.30 μM detection limit. Furthermore, the pH values affected the quenching behavior of the AC-NCDs/MO system where the interaction mechanisms were driven by the electrostatic interaction, π-π interaction, inner filter effect, and energy transfer. The pH 5 maintained higher quenching efficiency while other pH values slightly decreased the quenching efficiency. Incoming applications, the AC-NCDs can be used in various important fields, especially for environmental protection.