Superior antibacterial activity of zinc oxide/graphene oxide composites originating from high zinc concentration localized around bacteria

Green Chitosan‐Flaxseed Gum Film Loaded with ZnO for Packaging Applications

The possibility of manufacturing edible packaging materials with tailored properties and low cost has attracted much interest. This work presents a new material for edible packaging made from flaxseed gum (FSG) and chitosan (Ch) loaded with zinc oxide nanoparticles (ZnO‐NPs). ZnO‐NPs are synthesized in situ during the preparation of the edible film. The Ch/FSG/ZnO‐NPs films are prepared by casting Ch in different ratios of FSG (12.5%, 25%, 37.5%, and 50%). The resulting films are evaluated for their physicochemical, mechanical, and barrier properties to determine their suitability for coating or packaging food or bioproducts. By studying the antimicrobial activities of the ZnO‐NPs loaded films, we can see that ZnO‐NP's concentration highly affects these activities. In addition, the FSG improves mechanical properties. Films developed by incorporating ZnO‐NPs are proposed to be appropriate for low‐moisture food and pharmaceutical products, which can reduce environmental problems associated with synthetic packaging. Consequently, Ch/FSG composite films have the potential to replace conventional packaging.

An alternative ZnO with large specific surface area: Preparation, physicochemical characterization and effects on growth performance, diarrhea, zinc metabolism and gut barrier function of weaning piglets

High-dose ZnO is widely used to prevent diarrhea and promote growth of weaning piglets, which has led to serious problems of animal toxicity, bacterial resistance and environmental pollution. In this study, a novel alternative ZnO (AZO) was prepared and its physicochemical properties were characterized. Animal experiments were further conducted to evaluate the effects of the ZnO forms, the dose of AZO and the combinations with AZO on the growth performance, diarrhea, zinc metabolism and gut barrier function of weaning piglets. The results showed that the AZO, compared with ordinary ZnO (OZO), nano ZnO (NZO) and porous ZnO (PZO), had the largest surface area and reduced the release of Zn²⁺ into the gastric fluid. AZO showed better antibacterial activity on Escherichia coli K88, Staphylococcus aureus and Salmonella enteritidis but lower cytotoxicity on porcine intestinal epithelial cells. Animal experiments suggested that low-dose AZO, NZO and PZO (300 mg/kg) improved growth performance and reduced diarrhea in weaning piglets as well as high-dose OZO (3000 mg/kg). Notably, low-dose AZO had the lowest diarrhea incidence. Additionally, low-dose AZO in combination with probiotics improved digestibility and digestive enzyme activities. Low-dose AZO in combination with probiotics also upregulated the expression of the intestinal zinc transporter proteins ZIP4 and DMT1, increased zinc bioavailability, reduced faecal zinc emissions, and avoided zinc overload in the liver and oxidative damage caused by high-dose ZnO. Moreover, low-dose AZO in combination with probiotics improved the gut barrier function of weaning piglets by promoting the expression of tight junction proteins, mucins and antimicrobial peptides and increasing gut microbiota diversity and beneficial Lactobacillus. This study proposed a novel strategy to replace high-dose ZnO and antibiotics with low-dose AZO and probiotics in weaning piglets, which effectively improved growth performance and prevented diarrhea while reducing animal toxicity, bacterial resistance, heavy metal residues and zinc emission pollution.

A novel method for ZnO@NiO core-shell nanoparticle synthesis using pulse laser ablation in liquid and plasma jet techniques

Given their versatile nature and wide range of possible applications, core-shell nanoparticles (NPs) have received considerable attention. This paper proposes a novel method for synthesizing ZnO@NiO core-shell nanoparticles using a hybrid technique. The characterization demonstrates the successful formation of ZnO@NiO core-shell nanoparticles, which have an average crystal size of 13.059 nm. The results indicate that the prepared NPs have excellent antibacterial activity against both Gram-negative and Gram-positive bacteria. This behavior is primarily caused by the accumulation of ZnO@NiO NPs on the bacteria's surface, which results in cytotoxic bacteria and a relatively increased ZnO, resulting in cell death. Moreover, the use of a ZnO@NiO core-shell material will prevent the bacteria from nourishing themselves in the culture medium, among many other reasons. Finally, the PLAL is an easily scalable, cost-effective, and environmentally friendly method for the synthesis of NPs, and the prepared core-shell NPs could be used in other biological applications such as drug delivery, cancer treatment, and further biomedical functionalization.

Defect-Modified nano-BaTiO3 as a Sonosensitizer for Rapid and High-Efficiency Sonodynamic Sterilization

Multidrug-resistant bacteria caused by the unlimited overuse of antibiotics pose a great challenge to global health. An antibacterial method based on reactive oxygen species (ROS) is one of the effective strategies without inducing bacterial resistance. Owing to the ability of generating ROS, piezocatalytic material-mediated sonodynamic therapy (SDT) has drawn much attention. However, its major challenge is the low ROS generation efficiency in the piezocatalytic process due to the poor charge carrier concentration of piezoelectric materials. Vacancy engineering can regulate the charge density and largely promote ROS generation under ultrasound (US) irradiation. Herein, a US-responsive self-doped barium titanate with controlled oxygen vacancy (Vo) concentrations was successfully synthesized through a facile thermal reduction treatment at different temperatures (i.e., 350, 400, and 450 °C), and the corresponding samples were named as BTO-350, BTO-400, and BTO-450, respectively. Then, the effect of Vo concentrations on ROS generation efficiency during the piezocatalytic process was systematically studied. And BTO-400 was found to possess the highest piezocatalytic activity and excellent sonodynamic antibacterial performance against Escherichia coli and Staphylococcus aureus. Furthermore, its antibacterial mechanism was confirmed that the ROS generated under US could damage bacterial cell membrane and cause considerable leakage of cytoplasmic components and irreversible death of bacteria. Notably, the in vivo results illustrated that the BTO-400 could serve as an effective antibacterial agent and accelerate skin healing via SDT therapy. In all, the Vo defect-modified nano-BaTiO₃ has a noticeable potential to induce a rapid and efficient sterilization as well as skin tissue repair by SDT.

Graphene@Curcumin-Copper Paintable Coatings for the Prevention of Nosocomial Microbial Infection

The rise of antimicrobial resistance has brought into focus the urgent need for the next generation of antimicrobial coating. Specifically, the coating of suitable antimicrobial nanomaterials on contact surfaces seems to be an effective method for the disinfection/contact killing of microorganisms. In this study, the antimicrobial coatings of graphene@curcumin-copper (GN@CR-Cu) were prepared using a chemical synthesis methodology. Thus, the prepared GN@CR-Cu slurry was successfully coated on different contact surfaces, and subsequently, the GO in the composite was reduced to graphene (GN) by low-temperature heating/sunlight exposure. Scanning electron microscopy was used to characterize the coated GN@CR-Cu for the coating properties, X-ray photon scattering were used for structural characterization and material confirmation. From the morphological analysis, it was seen that CR and Cu were uniformly distributed throughout the GN network. The nanocomposite coating showed antimicrobial properties by contact-killing mechanisms, which was confirmed by zone inhibition and scanning electron microscopy. The materials showed maximum antibacterial activity against E. coli (24 ± 0.50 mm) followed by P. aeruginosa (18 ± 0.25 mm) at 25 µg/mL spot inoculation on the solid media plate, and a similar trend was observed in the minimum inhibition concentration (80 µg/mL) and bactericidal concentration (160 µg/mL) in liquid media. The synthesized materials showed excellent activity against E. coli and P. aeruginosa. These materials, when coated on different contact surfaces such medical devices, might significantly reduce the risk of nosocomial infection.

Visible Light-Responsive Selenium Nanoparticles Combined with Sonodynamic Therapy to Promote Wound Healing

In this paper, we synthesized selenium nanoparticles (SeNPs) that could be effectively excited by pure yellow light (YL) source to enhance antibacterial ability. Meanwhile, YL could also play the role of anti-inflammatory and promote wound healing. In addition, in order to overcome the problem of low penetration depth of photodynamic therapy (PDT), SeNPs were encapsulated with polyethylenimine (PEI), then modified with the sound sensitive agent indocyanine green (ICG), realizing the combined photoacoustic therapy to promote the healing of wounds infected by drug-resistant bacteria. The antibacterial efficiency of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli) reached more than 99% in in vitro and in vivo experiments within 10 min, which could safely and quickly kill drug-resistant bacteria to repair and heal wounds.

How Effective are Metal Nanotherapeutic Platforms Against Bacterial Infections? A Comprehensive Review of Literature

The emergence of multidrug-resistant bacteria has been deemed a global crisis that affects humans worldwide. Novel anti-infection strategies are desperately needed because of the limitations of conventional antibiotics. However, the increasing gap between clinical demand and antimicrobial treatment innovation, as well as the membrane permeability obstacle especially in gram-negative bacteria fearfully restrict the reformation of antibacterial strategy. Metal-organic frameworks (MOFs) have the advantages of adjustable apertures, high drug-loading rates, tailorable structures, and superior biocompatibilities, enabling their utilization as drug delivery carriers in biotherapy applications. Additionally, the metal elements in MOFs are usually bactericidal. This article provides a review of the state-of-The-art design, the underlying antibacterial mechanisms and antibacterial applications of MOF- and MOF-based drug-loading materials. In addition, the existing problems and future perspectives of MOF- and MOF-based drug-loading materials are also discussed.

Preparation and characterization of GO/ZnO/Ag nanocomposites and their synergistic antibacterial effect on Streptococcus mutans

In this study, GO/ZnO/Ag nanocomposites were prepared by a hydrothermal method in one step. The microstructure and surface morphology of the material were analyzed by x-ray diffraction and a scanning electron microscope. The chemical interactions between the available oxygen functional groups of reduced graphene oxide and the inorganic parts (Ag and ZnO) were analyzed by XPS and FTIR. The synergistic antibacterial activity of the nanocomposites against Streptococcus mutans was investigated. It was confirmed that GO/ZnO/Ag could inhibit the growth of S. mutans. The minimal inhibitory concentration and minimum bactericidal concentration of GO/ZnO/Ag on the surface structure of S. mutans were 62.5 and 125 µg/ml, respectively. The material was added to a dental dentin binder, and the modified dentin binder specimens with GO/ZnO/Ag had a significant antibacterial effect against Streptococcus mutans. The results showed that a low dose of GO/ZnO/Ag did not affect the shear bond strength of the dentin binder (P > 0.05), while a high dose of GO/ZnO/Ag decreased the shear bond strength of the dentin binder (P < 0.05). With an increase in GO/ZnO/Ag, the contact angle of the modified dentin binder specimens decreased and the hydrophilicity increased. The nanocomposites can not only be used as antibacterial agents but also have potential applications in biomedical fields.

Development and DoE-ANN based optimization of novel swellable matrix-diffusible doxorubicin loaded zinc oxide nanoflowers using sonochemical-precipitation method

This research aimed to acquire doxorubicin loaded zinc oxide nanoflowers (DOX-ZnO-NFs) for intracellular drug cargo possessing a synergistic in-vitro anticancer activity with minimal toxicity. Zinc is the main inorganic metallic component of various enzyme systems and has the possibility of fabrication into the diverse nano-structural forms. An easy absorption and extensive tissue distribution of zinc have made it unique candidate for drug delivery system. Hence, the zinc oxide nanoflowers were prepared with sonochemical-precipitation. The developed system was characterized using the reported methods and was optimized employing design of experiment, coupled with artificial neural network approach. The optimized nanoflowers (DOX-ZnO-NFV) were anionic with particle size of 24 ± 0.05 nm, polydispersity index of <0.5, a zeta potential of -25.68 ± 0.16 mV, yield of 87.40% and encapsulation efficiency of 85.25%. DOX-ZNO-NFV depicted sustained DOX release, around 65.413% release in 30 h at pH 7.4 and assumed Weibull model with its derived parameters, a and b of 22.77 and 0.918, respectively. DOX-ZnO-NFV remained stable on storage for 3 months at 4° C/50% RH and 25° C/60% RH. DOX-ZnO-NFV displayed a zone of inhibition of 13.50 ± 1.25 mm and 25.50 ± 0.98 mm, respectively against gram-positive Staphylococcus aureus and gram-negative Escherichia coli strains, presenting the nanoflowers as self-preservative. DOX-ZnO-NFV exhibited higher in-vitro anticancer activity in Henrietta Lacks cell line, with least hemolysis compared to the free DOX and ZnO-NF. Thus, doxorubicin loaded zinc oxide nanoflowers envisioned to act as better chemotherapeutic cargos with the maximize anticancer activity and minimal toxicity.

Combination of 2-tert-Butyl-1,4-Benzoquinone (TBQ) and ZnO Nanoparticles, a New Strategy To Inhibit Biofilm Formation and Virulence Factors of Chromobacterium violaceum

Drug-resistant bacteria have been raising serious social problems. Bacterial biofilms and different virulence factors are the main reasons for persistent infections. As a conditioned pathogen, Chromobacterium violaceum has evolved a vast network of regulatory mechanisms to modify and fine-tune biofilm development, contributing to multidrug resistance. However, there are few therapies to combat drug-resistant bacteria. Quorum sensing (QS) inhibitors (QSIs) are a promising strategy to solve antibiotic resistance. Our previous work suggested that 2-tert-butyl-1,4-benzoquinone (TBQ) is a potent QSI. In this study, the combination of zinc oxide nanoparticles (ZnO-NPs) and TBQ (ZnO-TBQ) was investigated for the treatment of Chromobacterium violaceum ATCC 12472 infection. ZnO-NPs attach to cell walls or biofilms, and the local dissolution of ZnO-NPs can lead to increased Zn²⁺ concentrations, which could destroy metal homeostasis, corresponding to disturbances in amino acid metabolism and nucleic acid metabolism. ZnO-NPs significantly improved the efficiency of TBQ in inhibiting the QS-related virulence factors and biofilm formation of C. violaceum ATCC 12472. ZnO-TBQ effectively reduces the expression of genes related to QS, which is conducive to limiting the infectivity of C. violaceum ATCC 12472. Caenorhabditis elegans nematodes treated with ZnO-TBQ presented a significant improvement in the survival rate by 46.7%. Overall, the combination of ZnO-NPs and TBQ offers a new strategy to attenuate virulence factors and biofilm formation synergistically in some drug-resistant bacteria. IMPORTANCE The combination of ZnO-NPs and TBQ (ZnO-TBQ) can compete with the inducer N-decanoyl-homoserine lactone (C₁₀-HSL) by binding to CviR and downregulate genes related to the CviI/CviR system to interrupt the QS system of C. violaceum ATCC 12472. The downstream genes responding to cviR were also downregulated so that virulence factors and biofilm formation were inhibited. Furthermore, ZnO-TBQ presents multiple metabolic disturbances in C. violaceum ATCC 12472, which results in the reduced multidrug resistance and pathogenicity of C. violaceum ATCC 12472. In an in vivo assay, C. elegans nematodes treated with ZnO-TBQ presented a significant improvement in the survival rate by 46.7% by limiting the infectivity of C. violaceum ATCC 12472. In addition, ZnO-TBQ inhibited the generation of virulence factors and biofilm formation 2-fold compared to either ZnO-NPs or TBQ alone. The combination of ZnO-NPs with TBQ offers a potent synergistic strategy to reduce multidrug resistance and pathogenicity.

Antibacterial Carbon Dots-Based Composites

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Blending with transition metals improves bioresorbable zinc as better medical implants

Zinc (Zn) is a new class of bioresorbable metal that has potential for cardiovascular stent material, orthopedic implants, wound closure devices, etc. However, pure Zn is not ideal for these applications due to its low mechanical strength and localized degradation behavior. Alloying is the most common/effective way to overcome this limitation. Still, the choice of alloying element is crucial to ensure the resulting alloy possesses sufficient mechanical strength, suitable degradation rate, and acceptable biocompatibility. Hereby, we proposed to blend selective transition metals (i.e., vanadium-V, chromium-Cr, and zirconium-Zr) to improve Zn's properties. These selected transition metals have similar properties to Zn and thus are beneficial for the metallurgy process and mechanical property. Furthermore, the biosafety of these elements is of less concern as they all have been used as regulatory approved medical implants or a component of an implant such as Ti6Al4V, CoCr, or Zr-based dental implants. Our study showed the first evidence that blending with transition metals V, Cr, or Zr can improve Zn's properties as bioresorbable medical implants. In addition, three in vivo implantation models were explored in rats: subcutaneous, aorta, and femoral implantations, to target the potential clinical applications of bioresorbable Zn implants.

•

Tensile strength and elongation of Zn alloys can reach over 220 MPa and 30%, respectively.

•

Three in vivo implantation models to investigate and compare biodegradations behavior at different locations of the body.

•

Zn–Zr and Zn–V alloys can induce pro-regenerative inflammation responses in aortas.

•

All Zn alloys can promote osteointegration in femur.

High value valorization of lignin as environmental benign antimicrobial

Lignin is a natural aromatic polymer of p-hydroxyphenylpropanoids with various biological activities. Noticeably, plants have made use of lignin as biocides to defend themselves from pathogen microbial invasions. Thus, the use of isolated lignin as environmentally benign antimicrobial is believed to be a promising high value approach for lignin valorization. On the other hand, as green and sustainable product of plant photosynthesis, lignin should be beneficial to reduce the carbon footprint of antimicrobial industry. There have been many reports that make use of lignin to prepare antimicrobials for different applications. However, lignin is highly heterogeneous polymers different in their monomers, linkages, molecular weight, and functional groups. The structure and property relationship, and the mechanism of action of lignin as antimicrobial remains ambiguous. To show light on these issues, we reviewed the publications on lignin chemistry, antimicrobial activity of lignin models and isolated lignin and associated mechanism of actions, approaches in synthesis of lignin with improved antimicrobial activity, and the applications of lignin as antimicrobial in different fields. Hopefully, this review will help and inspire researchers in the preparation of lignin antimicrobial for their applications.

An Overview on Exploitation of Graphene-Based Membranes: From Water Treatment to Medical Industry, Including Recent Fighting against COVID-19

Graphene and its derivatives have lately been the subject of increased attention for different environmental applications of membrane technology such as water treatment and air filtration, exploiting their antimicrobial and antiviral activity. They are interesting candidates as membrane materials for their outstanding mechanical and chemical stability and for their thin two-dimensional (2D) nanostructure with potential pore engineering for advanced separation. All these applications have evolved and diversified from discovery to today, and now graphene and graphene derivatives also offer fascinating opportunities for the fight against infective diseases such as COVID-19 thanks to their antimicrobial and antiviral properties. This paper presents an overview of graphene-based 2D materials, their preparation and use as membrane material for applications in water treatment and in respiratory protection devices.

Metallic Nanosystems in the Development of Antimicrobial Strategies with High Antimicrobial Activity and High Biocompatibility

Antimicrobial resistance is a major and growing global problem and new approaches to combat infections caused by antibiotic resistant bacterial strains are needed. In recent years, increasing attention has been paid to nanomedicine, which has great potential in the development of controlled systems for delivering drugs to specific sites and targeting specific cells, such as pathogenic microbes. There is continued interest in metallic nanoparticles and nanosystems based on metallic nanoparticles containing antimicrobial agents attached to their surface (core shell nanosystems), which offer unique properties, such as the ability to overcome microbial resistance, enhancing antimicrobial activity against both planktonic and biofilm embedded microorganisms, reducing cell toxicity and the possibility of reducing the dosage of antimicrobials. The current review presents the synergistic interactions within metallic nanoparticles by functionalizing their surface with appropriate agents, defining the core structure of metallic nanoparticles and their use in combination therapy to fight infections. Various approaches to modulate the biocompatibility of metallic nanoparticles to control their toxicity in future medical applications are also discussed, as well as their ability to induce resistance and their effects on the host microbiome.

Phyto-Mediated Controllable Synthesis of ZnO Clusters with Bactericidal Activity

The rapid development of antibiotic resistance has been considered a major threat to public health. Nanomaterials have risen to be an effective weapon to tackle this problem through multiple antibacterial mechanisms. The improved and tailored physiochemical properties of fine-tuned secondary nanoarchitectures contribute to the superior bactericidal actions of metal oxide structures. However, it is still challenging to construct secondary structures through mild green manufacturing methods. Here, we report the preferred antibacterial ZnO nanocrystal clusters formed by a green structure-tuning synthesis process, in which the primary ZnO nanoparticles with sizes <10 nm were assembled into different forms of clusters depending on the zinc salt concentration and temperature. ZnO clusters with a stable loose-assembly structure and a rougher surface exhibited better bactericidal ability with minimal inhibitory concentrations of 0.5 and 0.1 mg/mL against Escherichia coli and Staphylococcus aureus, respectively. The underlying mechanism is related to enhancing contact with bacteria, releasing small ZnO nanoparticles, and generating additional reactive oxygen species, which could aggravate the damage to bacterial cell membrane and eventually lead to bacterial death. Furthermore, attachment of phenolic compounds from olive leaf extract would promote membrane penetration by ZnO nanoparticles, resulting in the improvement of antibacterial activities, which profit from the green route mediated by Olea europaea leaf extract that could structure-tune ZnO nanocrystal clusters in one simple step that retains the active ingredients on the nanoparticles. This work proposes a feasible and clean strategy to improve the structure-bioactivity relationship of ZnO by controlling its growth into a preferable structure, and the developed ZnO clusters have a good prospect in antibacterial applications because of their excellent performance and green fabrication method.

Graphene-Based Nanocomposites as Antibacterial, Antiviral and Antifungal Agents

Over the past decade, there have been many interesting studies in the scientific literature about the interaction of graphene-based polymeric nanocomposites with microorganisms to tackle antimicrobial resistance. These studies have reported variable intensities of biocompatibility and selectivity for the nanocomposites toward a specific strain, but it is widely believed that graphene nanocomposites have antibacterial, antiviral, and antifungal activities. Such antibacterial activity is due to several mechanisms by which graphene nanocomposites can act on cells including stimulating oxidative stress; disrupting membranes due to sharp edges; greatly changing core structure mechanical strength and coarseness. However, the underlying mechanisms of graphene nanocomposites as antiviral and antifungal agents remain relatively scarce. In this review, recent advances in the synthesis, functional tailoring, and antibacterial, antiviral, and antifungal applications of graphene nanocomposites are summarized. The synthesis of graphene materials and graphene-based polymeric nanocomposites with techniques such as pressurized gyration, electrospinning, chemical vapor deposition, and layer-by-layer self-assembly is first introduced. Then, the antimicrobial mechanisms of graphene membranes are presented and demonstrated typical in vitro and in vivo studies on the use of graphene nanocomposites for antibacterial, antiviral, and antifungal applications. Finally, the review describes the biosafety, current limitations, and potential of antimicrobial graphene-based nanocomposites.

Antibacterial Effects of ZnO Nanodisks: Shape Effect of the Nanostructure on the Lethality in Escherichia coli

The role of the shape of the nanostructure on the antibacterial effects of ZnO nanodisks has been investigated by detailed mass spectrometry-based proteomics along with other spectroscopic and microscopic studies on E. coli. The primary interaction study of the E. coli cells in the presence of ZnO nanodisks showed rigorous cell surface damage disrupting the cell wall/membrane components detected by microscopic and ATR-FTIR studies. Protein profiling of whole-cell extracts in the presence and absence of ZnO nanodisks identified several proteins that are upregulated and downregulated under the stress of the nanodisks. This suggests that the bacterial response to the primary stress leads to a secondary impact of ZnO nanodisk toxicity via regulation of the expression of specific proteins. Results showed that the ZnO nanodisks lead to the over-expression of peptidyl-dipeptidase Dcp, Transketolase-1, etc., which are important to maintaining the osmotic balance in the cell. The abrupt change in osmotic pressure leads to mechanical injury to the membrane, and nutritional starvation conditions, which is revealed from the expression of the key proteins involved in membrane-protein assembly, maintaining membrane integrity, cell division processes, etc. Thus, indicating a deleterious effect of ZnO nanodisk on the protective layer of E. coli. ZnO nanodisks seem to primarily affect the protective membrane layer, inducing cell death via the development of osmotic shock conditions, as one of the possible reasons for cell death. These results unravel a unique behavior of the disk-shaped ZnO nanostructure in executing lethality in E. coli, which has not been reported for other known shapes or morphologies of ZnO nanoforms.

Antimicrobial Activity of Graphene-Based Nanocomposites: Synthesis, Characterization, and Their Applications for Human Welfare

Graphene (GN)-related nanomaterials such as graphene oxide, reduced graphene oxide, quantum dots, etc., and their composites have attracted significant interest owing to their efficient antimicrobial properties and thus newer GN-based composites are being readily developed, characterized, and explored for clinical applications by scientists worldwide. The GN offers excellent surface properties, i.e., a large surface area, pH sensitivity, and significant biocompatibility with the biological system. In recent years, GN has found applications in tissue engineering owing to its impressive stiffness, mechanical strength, electrical conductivity, and the ability to innovate in two-dimensional (2D) and three-dimensional (3D) design. It also offers a photothermic effect that potentiates the targeted killing of cells via physicochemical interactions. It is generally synthesized by physical and chemical methods and is characterized by modern and sophisticated analytical techniques such as NMR, Raman spectroscopy, electron microscopy, etc. A lot of reports show the successful conjugation of GN with existing repurposed drugs, which improves their therapeutic efficacy against many microbial infections and also its potential application in drug delivery. Thus, in this review, the antimicrobial potentialities of GN-based nanomaterials, their synthesis, and their toxicities in biological systems are discussed.

Spinel ZnCr2O4 nanorods synthesized by facile sol-gel auto combustion method with biomedical properties

In this study, spinel zinc chromite nanorods (ZnCr₂O₄ NRs) were successfully manipulated by a simple sol-gel auto combustion process employing urea as fuel. The sample was only required to sinter at 500 °C for 2 h to obtain the single crystalline phase. The phase formation, crystallinity, and surface topography of synthesized ZnCr₂O₄ NRs were explored by X-ray diffraction (XRD), UV-Vis reflectance spectroscopy (UVDRS), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray (EDX) spectroscopy, and vibrating sample magnetometry (VSM). XRD analysis confirms the formation of spinel ZnCr₂O₄ NRs. The FTIR spectrum displays the two vibrational peaks of Cr-O, and Zn-O at 489 and 615 cm^-1, correspondingly. These vibrational bonds were correlated with ZnCr₂O₄ and revealed the production of cubic spinel ZnCr₂O₄ NRs. FESEM indicates the presence of hexagonal-rod-shaped particles. EDX spectrum demonstrates the elemental composition of the ZnCr₂O₄ NRs and confirms the primary peak of Zn, Cr, and O. The obtained ZnCr₂O₄ NRs exhibit an antiferromagnetic behavior. The bandgap energy of ZnCr₂O₄ NRs was ascertained and was shown to be 3.45 eV. Furthermore, the antifungal and antibacterial effect of ZnCr₂O₄ NRs was examined against pathogenic strains by disc diffusion technique. Besides these, the antimalarial activity of ZnCr₂O₄ NRs was studied against Plasmodium falciparum. Thus, the as-synthesized ZnCr₂O₄ NRs showed significant antibacterial, antifungal and antimalarial activity and may be helpful for research opening a novel horizon in nanomedicine. Graphical abstract.

Metallic and non-metallic nanoparticles from plant, animal, and fisheries wastes: potential and valorization for application in agriculture

Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic stresses caused by increased incidences of temperature extremes, drought, unseasonal flooding, and pathogens. These threats, mostly due to anthropogenic activities, resulted in severe challenges to crop and livestock production leading to substantial economic losses. It is essential to develop environmentally viable and cost-effective green processes to alleviate these stresses in the crops, livestock, and fisheries. The application of nanomaterials in farming practice to minimize nutrient losses, pest management, and enhance stress resistance capacity is of supreme importance. This paper explores innovative methods for synthesizing metallic and non-metallic nanoparticles using plants, animals, and fisheries wastes and their valorization to mitigate abiotic and biotic stresses and input use efficiency in climate-smart and stress-resilient agriculture including crop plants, livestock, and fisheries.

Next-generation finely controlled graded porous antibacterial bioceramics for high-efficiency vascularization in orbital reconstruction

Eyeball loss due to severe ocular trauma, intraocular malignancy or infection often requires surgical treatment called orbital implant reconstruction to rehabilitate the orbital volume and restore the aesthetic appearance. However, it remains a challenge to minimize the postoperative exposure and infection complications due to the inert nature of conventional orbital implants. Herein, we developed a novel Ca-Zn-silicate bioceramic implant with multi-functions to achieve the expected outcomes. The porous hardystonite (Ca2ZnSi2O7) scaffolds with triply periodic minimal surfaces (TPMS)-based pore architecture and graded pore size distribution from center to periphery (from 500 to 800 μm or vice versa) were fabricated through the digital light processing (DLP) technique, and the scaffolds with homogeneous pores (500 or 800 μm) were fabricated as control. The graded porous scaffolds exhibited a controlled bio-dissolving behavior and intermediate mechanical strength in comparison with the homogeneous counterparts, although all of porous implants presented significant antibacterial potential against S. aureus and E. coli. Meanwhile, the pore size-increasing scaffolds indicated more substantial cell adhesion, cell viability and angiogenesis-related gene expression in vitro. Furthermore, the gradually increasing pore feature exhibited a stronger blood vessel infiltrating potential in the dorsal muscle embedding model, and the spherical implants with such pore structure could achieve complete vascularization within 4 weeks in the eyeball enucleation rabbit models. Overall, our results suggested that the novel antibacterial hardystonite bioceramic with graded pore design has excellent potential as a next-generation orbital implant, and the pore topological features offer an opportunity for the improvement of biological performances in orbital reconstruction.

Toxicity Effects and Mechanisms of MgO Nanoparticles on the Oomycete Pathogen Phytophthora infestans and Its Host Solanum tuberosum

Engineered nanoparticles have recently been used for innovation in agricultural disease management. However, both the toxicity effects and mechanisms of nanoparticles in target pathogens and their host plants are still largely unknown. Here, we found that magnesium oxide nanoparticles (MgO NPs) could protect potatoes against Phytophthora infestans (P. infestans) at a low dosage (50 μg/mL). Through scanning electron microscopy observation, antioxidant enzymes activity measurement, and gene transcriptome analysis, we found that the cell surfaces of P. infestans were destroyed, endogenous superoxide dismutase continuously remained in a higher active state, oxidoreductase activity-related gene ontology (GO) terms were enriched with upregulation, and transporter-activity related GO terms and six essential metabolism-related pathways were enriched with downregulation in P. infestans after 30 min MgO NPs treatment, whereas only 89 genes were changed without enriched GO and pathways terms, and no change in antioxidant activities and phenylalnine ammonialyase in potato appeared at 6 h post-MgO NPs treatment. Only the "plant hormone signal transduction pathway" was enriched with upregulation under differential expression analysis in potatoes. In conclusion, cell surface distortion, continuous oxidative stress, and inhibitions of membrane transport activity and metabolic pathways were toxic mechanisms of Mg ONPs in P. infestans, and the "plant hormone signal transduction pathway" was potentially regulated by Mg-ONPs without obviously harmful effects on potato after Mg ONPs exposure.

Green Production and Interaction of Carboxylated CNTs/Biogenic ZnO Composite for Antibacterial Activity

Using biomolecule-rich plant extracts, the conversion of metal ions to metal oxide nanoparticles via abiogenic approach is highly intriguing, environmentally friendly, and quick. The inherent inclination of plant extracts function as capping agents in the insitu synthesis. In this study, biogenic zinc oxide nanoparticles (ZnO−NPs) were synthesized using an aqueous leaf extract from Moringaoleifera. The ZnO−NPs were then mixed with carboxylated carbon nanotubes (CNTs) to create a carboxylated CNTs/biogenic ZnO composite using asol–gel method. The CNTs/ZnO composite displayed 18 mm, 16 mm, and 17 mm zones of inhibition (ZOI) against Bacillus cereus, Pseudomonas aeruginosa, and Escherichia coli, respectively. In contrast with ZnO−NPs, the produced carboxylated CNTs/ZnO composite demonstrated a 13 percent elevation in ZOI as antibacterial activity against Bacillus cereus ATCC 19659, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853. The characterization of ZnO−NPs and the carboxylated CNTs/ZnO composite were performed via FTIR, UV/Vis spectroscopy, SEM, and XRD. The XRD pattern depicted a nano−sized crystalline structure (Wurtzite) of ZnO−NPs and a carboxylated CNTs/ZnO composite. The current work comprehends a valuable green technique for killing pathogenic bacteria, and gives fresh insights into the manufacture of metal oxide composites for future research.

Dually-Thermoresponsive Hydrogel with Shape Adaptability and Synergetic Bacterial Elimination in the Full Course of Wound Healing

Incomplete contact between a pre-formed hydrogel and irregular wound limits the therapeutic effect of the dressing and increases the risk of infection; while great concerns have remained regarding the potential toxicity of the residual additives of chemical crosslinking for in situ forming hydrogels. Therefore, it is desirable to develop a self-adaptive hydrogel in response to skin temperature with shape adaptability and efficient antibacterial properties to prevent microbial invasion. Herein, a dually-thermoresponsive hydrogel composed of poly(N-isopropylacrylamide) (PNIPAm) and methacrylated κ-carrageenan (MA-κ-CA) is designed with compliance at physiological temperature to realize shape adaptability for completely covering irregular wounds. Furthermore, the hydrogel with near-infrared (NIR)-responsive polypyrrole-polydopamine nanoparticles (PPy-PDA NPs) and Zn²⁺ -derived zeolitic imidazolate framework (ZIF-8) can generate localized heat and gradually release Zn²⁺ to realize safe, effective synergetic photothermal-chemical bactericidal capability. In addition, the release rate of Zn²⁺ can be accelerated by NIR-induced heating, and thus a more efficient sterilization can be provided to severely infected wounds. Therefore, the proposed hydrogel would serve as a promising wound dressing for the full course of wound healing, with the abilities of perfectly covering the wound and adapting to regenerating tissue, and controllable photothermal-chemical antibacterial capability to reach high bactericidal efficiency and long-term release of antibacterial agents.

Construction of a matchstick-shaped Au@ZnO@SiO2-ICG Janus nanomotor for light-triggered synergistic antibacterial therapy

The drug-resistance of bacteria poses a serious threat to public health, so the exploration of new antibacterial materials has attracted extensive attention. Here, we report Au@ZnO@SiO₂-ICG nanomotors as an antibacterial candidate. Firstly, we prepared the Janus structure Au@ZnO loaded with indocyanine green (ICG) and constructed a synergistic antibacterial platform with photothermal and photodynamic properties triggered by dual light sources. Specifically, the metal/semiconductor heterostructure of Au@ZnO has a synergistic effect under ultraviolet (UV) irradiation, which can adjust the transfer of interface electrons, so as to greatly improve the generation of cytotoxic ROS for photodynamic sterilization. The loaded ICG is an effective photosensitizer, and can induce a stronger photothermal effect in collaboration with Au under near-infrared light (NIR). In addition, the asymmetric structures of nanomotors have autonomous movement with the help of generated temperature gradient when exposed to NIR light, conducive to breaking through the bacterial membrane and improving the membrane insertion ability of antibacterial therapeutic agents. The results indicate that the prepared Au@ZnO@SiO₂-ICG nanomotors show excellent light responses and synergistic sterilization ability to Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). This study will provide a new idea for the application of metal-semiconductor nanocomposites in the treatment of bacterial infection.

Nanobiotics against antimicrobial resistance: harnessing the power of nanoscale materials and technologies

Given the spasmodic increment in antimicrobial resistance (AMR), world is on the verge of “post-antibiotic era”. It is anticipated that current SARS-CoV2 pandemic would worsen the situation in future, mainly due to the lack of new/next generation of antimicrobials. In this context, nanoscale materials with antimicrobial potential have a great promise to treat deadly pathogens. These functional materials are uniquely positioned to effectively interfere with the bacterial systems and augment biofilm penetration. Most importantly, the core substance, surface chemistry, shape, and size of nanomaterials define their efficacy while avoiding the development of AMR. Here, we review the mechanisms of AMR and emerging applications of nanoscale functional materials as an excellent substitute for conventional antibiotics. We discuss the potential, promises, challenges and prospects of nanobiotics to combat AMR.

Photocatalytic effect-assisted antimicrobial activities of acrylic resin incorporating zinc oxide nanoflakes

To overcome the deficiency of the antimicrobial effect of polymer, zinc oxide nanoparticles have been widely utilized as advanced nanofillers due to their antimicrobial and photocatalytic activity. However, the underlying antimicrobial mechanism has not been fully understood apart from topological and physical characteristics. In this study, we prepared zinc oxide nanoparticles-based acrylic resin to explore its antimicrobial mechanism under controlled mechanophysical conditions by using silane-treated zinc oxide nanoflakes (S-ZnNFs). S-ZnNFs incorporated acrylic resin (poly(methyl methacrylate), PMMA) composites up to 2 wt% were selected based on comparable mechanophysical properties (e.g., roughness, wettability, strength and hardness), possibly affecting antimicrobial properties beyond the zinc oxide nanoparticle effect, to bare PMMA. Antimicrobial adhesion results were still observed in 2 wt% S-ZnNFs incorporated PMMA using Candida albicans (C. albicans), one of the fungal infection species. In order to confirm the antimicrobial effects by photocatalysis, we pre-exposed the UV light on 2 wt% S-ZnNF composites before cell seeding, revealing synergetic antimicrobial effect via additional reactive oxygen species (ROS) generation to C. albicans over zinc oxide nanoparticle-induced one. RNA-seq analysis revealed distinguished cellular responses between zinc oxide nanoparticles and UV-mediated photocatalytic effect, but both linked to generation of intracellular ROS. Thus, the above data suggest that induction of high intracellular ROS of C. albicans was the main antimicrobial mechanism under controlled mechanophysical parameters and synergetic ROS accumulation can be induced by photocatalysis, recapitulating a promising use of a S-ZnNFs or possibly zinc oxide nanoparticles as intracellular-ROS-generating antimicrobial nanofillers in acrylic composite for biomedical applications.

High-strength biodegradable zinc alloy implants with antibacterial and osteogenic properties for the treatment of MRSA-induced rat osteomyelitis

Implant-related infections caused by drug-resistant bacteria remain a major challenge faced by orthopedic surgeons. Furthermore, ideal prevention and treatment methods are lacking in clinical practice. Here, based on the antibacterial and osteogenic properties of Zn alloys, Ag and Li were selected as alloying elements to prepare biodegradable Zn-Li-Ag ternary alloys. Li and Ag addition improved the mechanical properties of Zn-Li-Ag alloys. The Zn-0.8Li-0.5Ag alloy exhibited the highest ultimate tensile strength (>530 MPa). Zn-Li-Ag alloys showed strong bactericidal effects on methicillin-resistant Staphylococcus aureus (MRSA) in vitro. RNA sequencing revealed two MRSA-killing mechanisms exhibited by the Zn-0.8Li-0.5Ag alloy: cellular metabolism disturbance and induction of reactive oxygen species production. To verify that the therapeutic potential of the Zn-0.8Li-0.5Ag alloy is greater than that of Ti intramedullary nails, X-ray, micro-computed tomography, microbiological, and histological analyses were conducted in a rat femoral model of MRSA-induced osteomyelitis. Treatment with Zn-0.8Li-0.5Ag alloy implants resulted in remarkable infection control and favorable bone retention. The in vivo safety of this ternary alloy was confirmed by evaluating vital organ functions and pathological morphologies. We suggest that, with its good antibacterial and osteogenic properties, Zn-0.8Li-0.5Ag alloy can serve as an orthopedic implant material to prevent and treat orthopedic implant-related infections.

Zinc oxide/graphene oxide nanocomposites efficiently inhibited cadmium-induced hepatotoxicity via releasing Zn ions and up-regulating MRP1 expression

Environmental cadmium (Cd) pollution has been verified to associated with various hepatic diseases, as Cd has been classified as one of the TOP 20 Hazardous Substances and liver is the main target of Cd poisoning. However, to design efficient hepatic antidotes with excellent detoxification capacity and reveal their underlying mechanism(s) are still challenges in Cd detoxification. Herein, ZnO/GO nanocomposites with favorable biocompatibility was uncovered their advanced function against Cd-elicited liver damage at the in situ level in vivo by 9.4 T magnetic resonance imaging (MRI). To explore the cellular detoxification mechanism, ZnO/GO nanocomposites was found to effectively inhibit the cyto- and geno-toxicity of Cd with the maximum antagonistic efficiency to be approximately 90%. Mechanistically, ZnO/GO nanocomposites competitively inhibited the cellular Cd uptake through releasing Zn ions, and significantly promoted Cd excretion via targeting the efflux pump of multidrug resistance associated protein1 (MRP1), which was confirmed by mass spectra and immunohistochemical analysis in kidney, a main excretion organ of Cd. Our data provided a novel approach against Cd-elicited hepatotoxic responses by constructed ZnO/GO nanocomposites both in vitro and in vivo, which may have promising application in prevention and detoxification for Cd poisoning.

Nanomaterial-Based Zinc Ion Interference Therapy to Combat Bacterial Infections

Pathogenic bacterial infections are the second highest cause of death worldwide and bring severe challenges to public healthcare. Antibiotic resistance makes it urgent to explore new antibacterial therapy. As an essential metal element in both humans and bacteria, zinc ions have various physiological and biochemical functions. They can stabilize the folded conformation of metalloproteins and participate in critical biochemical reactions, including DNA replication, transcription, translation, and signal transduction. Therefore, zinc deficiency would impair bacterial activity and inhibit the growth of bacteria. Interestingly, excess zinc ions also could cause oxidative stress to damage DNA, proteins, and lipids by inhibiting the function of respiratory enzymes to promote the formation of free radicals. Such dual characteristics endow zinc ions with unparalleled advantages in the direction of antibacterial therapy. Based on the fascinating features of zinc ions, nanomaterial-based zinc ion interference therapy emerges relying on the outstanding benefits of nanomaterials. Zinc ion interference therapy is divided into two classes: zinc overloading and zinc deprivation. In this review, we summarized the recent innovative zinc ion interference strategy for the treatment of bacterial infections and focused on analyzing the antibacterial mechanism of zinc overloading and zinc deprivation. Finally, we discuss the current limitations of zinc ion interference antibacterial therapy and put forward problems of clinical translation for zinc ion interference antibacterial therapy.

Enhanced Antibacterial Activity through Silver Nanoparticles Deposited onto Carboxylated Graphene Oxide Surface

The strong bactericidal action of silver nanoparticles (AgNPs) is usually limited by their degree of aggregation. Deposition of AgNPs onto a graphene oxide (GO) surface to generate GO-Ag hybrids has been shown to be an effective method of controlling these aggregation problems. In this sense, a novel carboxylated graphene oxide–silver nanoparticle (GOCOOH-Ag) material has been synthesized, and their antibacterial and biofilm formation inhibitions have been studied. AgNPs decorating the GOCOOH surface achieved an average size of 6.74 ± 0.25 nm, which was smaller than that of AgNPs deposited onto the GO surface. In addition, better distribution of AgNPs was achieved using carboxylated material. It is important to highlight the main role of the carboxylic groups in the nucleation and growth of the AgNPs that decorate the GO-based material surface. In vitro antibacterial activity and antibiofilm-forming action were tested against Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Both GO-Ag and GOCOOH-Ag reduced bacterial growth, analyzed by time–kill curves. However, the minimum inhibitory concentration and the minimum bactericidal concentration of GOCOOH-Ag were lower than those of GO-Ag for all strains studied, indicating that GOCOOH-Ag has better antibacterial activity. In addition, both nanomaterials prevent biofilm formation, with a higher reduction of biofilm mass and cell viability in the presence of GOCOOH-Ag. The carboxylation functionalization in GO-based materials can be applied to improve the bactericidal and antibiofilm-forming action of the AgNPs.

Synthesis and Characterization of Molybdenum Oxide Nanoparticles by Green Method Useful in Antifungal Applications Against Colletotrichum Gloeosporioides

In the present study, the synthesis of molybdenum oxide nanoparticles is done by the reduction of Ammonium molybdate with the extract from the leaves of Citrus sinensis. The optical studies like Fourier Transform Infrared studies and UV-vis-NIR gives insight on the details of presence of functional groups and absorption of light. The X ray diffraction studies reveal its crystallinity and its particle size have been calculated. The zeta potential, which is used to characterize the metal nanoparticles, has been studied. The antifungal property of the nanoparticles has been studied and a plot for disease index has been discussed. This natural method of synthesizing the molybdenum oxide nanoparticles can find numerous applications in biophysics.

Highly Stable Buffer-Based Zinc Oxide/Reduced Graphene Oxide Nanosurface Chemistry for Rapid Immunosensing of SARS-CoV-2 Antigens

The widespread and long-lasting effect of the COVID-19 pandemic has called attention to the significance of technological advances in the rapid diagnosis of SARS-CoV-2 virus. This study reports the use of a highly stable buffer-based zinc oxide/reduced graphene oxide (bbZnO/rGO) nanocomposite coated on carbon screen-printed electrodes for electrochemical immuno-biosensing of SARS-CoV-2 nuelocapsid (N-) protein antigens in spiked and clinical samples. The incorporation of a salt-based (ionic) matrix for uniform dispersion of the nanomixture eliminates multistep nanomaterial synthesis on the surface of the electrode and enables a stable single-step sensor nanocoating. The immuno-biosensor provides a limit of detection of 21 fg/mL over a linear range of 1-10 000 pg/mL and exhibits a sensitivity of 32.07 ohms·mL/pg·mm² for detection of N-protein in spiked samples. The N-protein biosensor is successful in discriminating positive and negative clinical samples within 15 min, demonstrating its proof of concept used as a COVID-19 rapid antigen test.

Distinct response patterns of bacterial communities in Ag- and ZnO-rGO nanocomposite-amended silt loam soils

The widespread application of metal-based nanoparticle (MNPs)/reduced graphene oxide (rGO) composites inevitably leads to their release into soils. However, we lack a detailed understanding of the bacterial community response to MNPs-rGO exposure in farmland soils. Here, we conducted a soil microcosm experiment to analyze the potential impact of MNPs-rGO on bacterial communities in two field soils via high-throughput sequencing. The change in alpha diversity of bacterial communities was more susceptible to Ag-rGO and ZnO-rGO treatments than CuO-rGO. In both soils, MNPs-rGO significantly changed the bacterial community structure even at a low dose (1 mg kg^-1). The bacterial community structure was most strongly affected by Ag-rGO at 30 days, but the greatest changes occurred in ZnO-rGO at 60 days. The differences in soil properties could shape bacterial communities to MNPs-rGO exposure. Distance-based redundancy analysis and functional annotation of prokaryotic taxa showed that some bacterial species associated with nitrogen cycling were greatly influenced by Ag-rGO and ZnO-rGO exposure. In sum, Ag-rGO and ZnO-rGO may potentially affect bacterial communities and nitrogen turnover under long-term realistic field exposure. These findings present a perspective on the response of bacterial communities to MNPs-rGO and provide a fundamental basis for estimating the ecological behavior of MNPs-rGO.

Evolution of graphene oxide (GO)-based nanohybrid materials with diverse compositions: an overview

The discovery of the 2D nanostructure of graphene was in fact the beginning of a new generation of materials. Graphene itself, its oxidized form graphene oxide (GO), the reduced form of GO (RGO) and their numerous composites are associates of this generation. Out of this spectrum of materials, the development of GO and related hybrid materials has been reviewed in the present article. GO can be functionalized with metals (Ag and Mg) and metal oxides (CuO, MgO, Fe2O3, Ag2O, etc.) nanoparticles (NPs), organic ligands (chitosan and EDTA) and can also be dispersed in different polymeric matrices (PVA, PMMA, PPy, and PAn). All these combinations give rise to nanohybrid materials with improved functionality. An updated report on the chronological development of such nanohybrid materials of diverse nature has been delivered in the present context. Modifications in synthesis methodologies as well as performances and applications of individual materials are addressed accordingly. The functional properties of GO were synergistically modified by photoactive semiconductor NPs; as a result, the GO-MO hybrids acquired excellent photocatalytic ability and were able to degrade a large variety of organic dyes (MB, RhB, MO, MR, etc.) and pathogens. The large surface area of GO was successfully complemented by the NPs so that high and selective adsorption capacity towards metal ions and organic molecules as well as improved charge separation properties could be achieved. As a result, GO-MO hybrids have been considered effective materials in water purification, energy storage and antibacterial applications. GO-MO hybrids with magnetic particles have exhibited selective destruction of cancerous cells and controlled drug release properties, extremely important in the pharmaceutical field. Chitosan and EDTA-modified GO could form 3D network-like structures with strong efficiency in removing heavy metal ions and organic pollutants. GO as a filler enhanced the strength, flexibility and functional properties of common polymers, such as PVA and PVC, to a large extent while, GO-CP composites with polyaniline and polypyrrole are considered suitable for the fabrication of biosensors, supercapacitors, and MEMS as well as efficient photothermal therapy agents. In summary, GO-based hybrids with inorganic and organic counterparts have been designed, the unique properties of which are exploited in versatile fields of applications.

The antibacterial property of zinc oxide/graphene oxide modified porous polyetheretherketone against S. sanguinis, F. nucleatum and P. gingivalis

About 30% failures of implant are caused by peri-implantitis. Subgingival plaque, consisting of S. sanguinis, F. nucleatum, P. gingivalis et. al, is the initiating factor of peri-implantitis. Polyetheretherketone(PEEK) is widely used for the fabrication of implant abutment, healing cap and temporary abutment in dental applications. As a biologically inert material, PEEK has shown poor antibacterial properties. To promote the antibacterial activity of PEEK, we loaded ZnO/GO on sulfonated PEEK. We screened out that when mass ratio of ZnO/GO was 4:1, dip-coating time was 25 min, ZnO/GO modified SPEEK shown the best physical and chemical properties. At the meantime, the ZnO/GO-SPEEK samples possess a good biocompatibility. The ZnO/GO-SPEEK inhibits P. gingivalis obviously, and could exert an antibacterial activity to S. sanguinis in the early stage, prevents biofilm formation effectively. With the favorable in vitro performances, the modification of PEEK with ZnO/GO is promising for preventing peri-implantitis.

A periodontal tissue regeneration strategy via biphasic release of zeolitic imidazolate framework-8 and FK506 using a uniaxial electrospun Janus nanofiber

Guided tissue regeneration (GTR) strategies are an effective approach to repair periodontal defects by using GTR membranes. However, commercial GTR membranes still have limitations in periodontal tissue regeneration owing to lack of antibacterial and osteogenic properties. The development of novel Janus nanofibers with biphasic release characteristics based on the therapeutic needs of GTR is essential to tackle this issue. Here, we developed a multifunctional Janus nanofiber via uniaxial electrospinning, with zeolitic imidazolate framework-8 nanoparticle (ZIF-8 NP) loading in the hydrophilic polyvinylpyrrolidone (PVP) part and FK506 embedding in the hydrophobic polycaprolactone (PCL) part. The release of Zn²⁺ conformed to the Ritger-Peppas kinetics which could effectively prevent bacterial infection, and the release profile of FK506 was fitted to a first-order equation which could provide persistent osteogenic stimulation for osteogenesis. The periodontal tissue regeneration data from a rat periodontitis model revealed that the multifunctional electrospun Janus nanofibers could be used as an effective bioplatform to restore alveolar bone impairment, compared with the control group. In summary, the Janus nanofibers with biphasic release characteristics quickly exert antibacterial function as well as continuously provide a microenvironment beneficial to the osteogenesis process, demonstrating its great potential for GTR treatment in dental clinic applications.

Improved mechanical, degradation, and biological performances of Zn–Fe alloys as bioresorbable implants

Zinc (Zn) is a promising bioresorbable implant material with more moderate degradation rate compared to magnesium (Mg) and iron (Fe). However, the low mechanical strength and localized degradation behavior of pure Zn limit its clinical applications. Alloying is one of the most effective ways to overcome these limitations. After screening the alloying element candidates regarding their potentials for improvement on the degradation and biocompatibility, we proposed Fe as the alloying element for Zn, and investigated the in vitro and in vivo performances of these alloys in both subcutaneous and femoral tissues. Results showed that the uniformly distributed secondary phase in Zn–Fe alloys significantly improved the mechanical property and facilitated uniform degradation, which thus enhanced their biocompatibility, especially the Zn-0.4Fe alloy. Moreover, these Zn–Fe alloys showed outstanding antibacterial property. Taken together, Zn–Fe alloys could be promising candidates as bioresorbable medical implants for various cardiovascular, wound closure, and orthopedic applications.

•

Zn-0.4Fe alloy significantly improved the mechanical strength and ductility.

•

Zn-0.4Fe alloy showed a uniform degradation behavior.

•

Subcutaneous and femoral implantations to compare in vivo performances.

•

Zn-0.4Fe alloy showed superior hemocompatibility and in vivo osteointegration.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

A review of graphene-TiO2 and graphene-ZnO nanocomposite photocatalysts for wastewater treatment

Technologies for wastewater remediation have been growing ever since the environmental and health concern is realized. Development of nanomaterials has enabled mankind to have different methods to treat the various kinds of inorganic and organic pollutants present in wastewater from many resources. Among the many materials, semiconductor materials have found many environmental applications due to their outstanding photocatalytic activities. TiO₂ and ZnO are more effectively used as photocatalyst or adsorbents in the withdrawal of inorganic as well as organic wastes from the wastewater. On the other hand, graphene is tremendously being investigated for applications in environmental remediation in view of the superior physical, optical, thermal, and electronic properties of graphene nanocomposites. In this work, graphene-TiO₂ and graphene-ZnO nanocomposites have been reviewed for photocatalytic wastewater treatment. The various preparation techniques of these nanocomposites have been discussed. Also, different design strategies for graphene-based photocatalyst have been revealed. These nanocomposites exhibit promising applications in most of the water purification processes which are reviewed in this work. Along with this, the development of these nanocomposites using biomass-derived graphene has also been introduced. PRACTITIONER POINTS: Graphene-TiO₂ and graphene-ZnO nanocomposites are effective for wastewater treatment through photocatalysis. These nanocomposite photocatalysts have been used in the form of membrane as well as antibacterial agents. Synthetic strategies and design considerations of graphene-based photocatalyst play a major role. Biomass-derived graphene-TiO₂ and graphene-ZnO nanocomposites have also found application in wastewater treatment.

NanoZnO-modified titanium implants for enhanced anti-bacterial activity, osteogenesis and corrosion resistance

Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Finally, challenges and future opportunities for nano-ZnO modified Ti-implants are proposed.

Enhanced Antibacterial Potential of Amoxicillin against Helicobacter pylori Mediated by Lactobionic Acid Coated Zn-MOFs

H. pylori (Helicobacter pylori) causes a common chronic infectious disease and infects around 4.4 billion people worldwide. H. pylori was classified as a member of the primary class of stomach cancer (stomach adenocarcinoma). Hence, this study was conducted to design a novel lactobionic acid (LBA)-coated Zn-MOFs to enhance bactericidal activity of Amoxicillin (AMX) against H. pylori. The synthesized Zn-MOFs were characterized by various techniques which included Dynamic Light Scattering (DLS), Fourier Transform Infrared (FT-IR) Spectroscopy, Powder X-ray diffraction, scanning electron microscope, and atomic force microscope. They were capable of encapsulating an increased amount of AMX and investigated for their efficacy to enhance the antibacterial potential of their loaded drug candidate. Interestingly, it was found that LBA-coated Zn-MOFs significantly reduced the IC₅₀, MIC, and MBIC values of AMX against H. pylori. Morphological investigation of treated bacterial cells further authenticated the above results as LBA-coated Zn-MOFs-treated cells underwent complete distortion compared with non-coated AMX loaded Zn-MOFs. Based on the results of the study, it can be suggested that LBA-coated Zn-MOFs may be an effective alternate candidate to provide new perspective for the treatment of H. pylori infections.

The Development of Polydimethysiloxane/ZnO–GO Antifouling Coatings

Abstract

The development of antifouling coating for sensor is desirable because the biofilm can shorten sensor’s life and cause inaccurate reading. In this study, a facile one-pot reaction was used to synthesized ZnO–graphene oxide (GO) (ZnO–GO) nanocomposites. Different amount of ZnO–GO was incorporated in the polydimethylsiloxane (PDMS) matrix respectively though a simple solution mixing method, in order to create PDMS/ZnO–GO nanocomposite (PZGO). The coating was obtained directly by spin coating of PZGO/tetrahydrofuran suspension. The hydrophobicity, surface roughness (Ra), surface free-energy (SFE) and nanoscale structure were investigated as antifouling factors. Antifouling tests were performed using two marine microorganisms, the cyanobacterium Synechococcus sp. Strain PCC 7002 and the diatom Phaeodactylum tricornutum. PZGO0.2 (mass ratio of ZnO–GO to PDMS: 0.2 wt%) displayed excellent antifouling property with 8.5% of Synechococcus sp. Strain PCC 7002 biofilm coverage, while PZGO0.1 (mass ratio of ZnO–GO to PDMS: 0.1 wt%) showed 2.4% P. tricornutum biofilm coverage. The antifouling property of the synthesized PZGO nanocomposite can be attributed to its high Ra and hydrophobicity which was caused by the good dispersion of ZnO–GO in PDMS matrix. This study suggests a potential of PZGO nanocomposite for sensor’s antifouling coating, which could contribute to improve sensor’s durability relating to biofouling in future.

Graphic Abstract

Green synthesis of Zno@GO nanocomposite and its' efficient antibacterial activity

Nanotechnologyapplications in the field of biomedicine like drug delivery, cell labeling, and bacterial inhibition are growing . New nano-materials having less toxicity and excellent antibacterial activity attract research interest. In the current study, while taking advantage of green synthesis we have decorated zinc oxide on the surface of grephene oxide forming Zno@GO nanocomposite. The Transmission electron microscopy (TEM) study showed successfully synthesized trigonal small sizes ZnO on the surface of GO nanosheets. The as-synthesized ZnO@GO was used against MDR gram-negative pathogen E-coli (BL21 DE3) and showed excellent antibacterial activity killing about 95 % toxic bacteria within 5 h due to electrostatic interaction between cell membrane of E. coli (BL21 DE3) and ZnO@GO complex. Hence the nano composite subsequently penetrated into the cytoplasm by damaging the cell membrane of bacteria, as a result production of ROS into the cytoplasm led to imbalance of metabolic system in the cell. Moreover, the cell membrane damage of gram-negative bacteria verified through zeta potential and propidium iodide (PI) study. Thus, our study develops a way to solve the challenge of efficient design of a drug delivery system for dissolution enhancement according to the need for required drug release.