Applied hydroformylation

Efficient Interfacial Sites between Metallic and Oxidized Cobalt for Propene Hydroformylation

Currently, the hydroformylation of short olefins is operated almost exclusively by using Rh catalysts. Considering the high cost and scarcity of rhodium resources, it is important to develop non-noble metal catalysts toward hydroformylation. Herein, we report an efficient cobalt-based catalyst rich in interfacial sites between metallic and oxidized cobalt species for the hydroformylation of short olefin, propene, under a moderate syngas pressure. The catalyst exhibited a high specific activity of 252 mol molCo-1 h-1 in toluene under 2 bar of propene and 40 bar of CO/H2 mixed gas (CO/H2 = 1:1) at 160 °C. According to mechanistic studies, the interface of metallic and oxidized cobalt species promoted the adsorption of CO and propene. Moreover, the interfacial sites lowered the energy barrier for CO* hydrogenation and C-C coupling compared with metallic cobalt.

Regiodivergent Carbonylation of Alkenes: Selective Palladium-Catalyzed Synthesis of Linear and Branched Selenoesters

An unprecedented regiodivergent palladium-catalyzed carbonylation of aromatic alkenes has been developed. Utilizing commercially available Pd(CH3 CN)2 Cl2 in the presence of 1,1'-ferrocenediyl-bis(tert-butyl(pyridin-2-yl)phosphine) ligand L8 diverse selenoesters are obtained in a straightforward manner. Key to success for the control of the regioselectivity of the carbonylation step is the concentration of the acidic co-catalyst. This general protocol features wide functional group compatibility and good regioselectivity. Mechanistic studies suggest that the presence of stoichiometric amounts of acid changes the properties and coordination mode of the ligand leading to reversed regioselectivity.

Solvent-Controllable C-F Bond Activation for Masked Formylation of α-Trifluoromethyl Alkenes via Organo-Photoredox Catalysis

A solvent-controllable organo-photoredox-catalyzed C-F bond activation for masked formylation of α-trifluoromethyl alkenes with low-priced 1,3-dioxolane as masked formyl radical equivalent has been described. Consequently, a diversity of masked formylated gem-difluoroalkenes and monofluoroalkenes are constructed in moderate to high yields. This approach merits readily available starting materials, mild reaction conditions, and broad substrate scope. The feasibility of this approach has been highlighted by the one-pot masked formylation/hydrolysis sequence to form γ,γ-difluoroallylic aldehydes and late-stage modification of pharmaceutical and natural product derivatives.

Conductive catalysis by subsurface transition metals

The nature of catalysis has been hotly pursued for over a century, and current research is focused on understanding active centers and their electronic structures. Herein, the concept of conductive catalysis is proposed and verified by theoretical simulations and experimental observations. Metallic systems containing buried catalytically active transitional metals and exposed catalytically inert main group metals are constructed, and the electronic interaction between them via metallic bonding is disclosed. Through the electronic interaction, the catalytic properties of subsurface transitional metals (Pd or Rh) can be transferred to outermost main group metals (Al or Mg) for several important transformations like semi-hydrogenation, Suzuki-coupling and hydroformylation. The catalytic force is conductive, in analogy with the magnetic force and electrostatic force. The traditional definition of active centers is challenged by the concept of conductive catalysis and the electronic nature of catalysis is more easily understood. It might provide new opportunities for shielding traditional active centers against poisoning or leaching and allow for precise regulation of their catalytic properties by the conductive layer.

Kinetics of H· Transfer from CpCr(CO)3H to Various Enamides: Application to Construction of Pyrrolidines

The rate constants kH (kD) have been determined at 27 °C for H· (D·) transfer from CpCr(CO)3H(D) to the C=C bonds of various enamides. This process leads to the formation of α-amino radicals. Vinyl enamides with N-alkyl and N-phenyl substituents have proven to be good H· acceptors, with rate constants close to those of styrene and methyl methacrylate. A methyl substituent on the incipient radical site decreases kH by a factor of 4; a methyl substituent on the carbon that will receive the H· decreases kH by a factor of 380. The measured kH values indicate that these α-amino radicals can be used for the cyclization of enamides to pyrrolidines. A vanadium hydride, HV(CO)4(dppe), has proven more effective at the cyclization of enamides than Cr or Co hydrides-presumably because the weakness of the V-H bond leads to faster H· transfer. The use of the vanadium hydride is operationally simple, employs mild reaction conditions, and has a broad substrate scope. Calculations have confirmed that H· transfer is the slowest step in these cyclization reactions.

Carbonylation as a Key Step in New Tandem Reactions - A Route to BODIPYs

Herein, a highly efficient five-step reaction sequence to BODIPYs is presented. The key step is the combination of transition metal-catalyzed in-situ generation of aldehydes and their subsequent organocatalytic activation to yield dipyrromethanes, which are further converted to the corresponding BODIPY. Classic syntheses towards BODIPYs have relied on aldehydes or acid chlorides, which are often not commercially available and rather sensitive to handle. The presented approach starts from readily available and stable alkenes or aryl-bromides, which allows to extend the range of readily available BODIPYs that can be tailored for their specific use. The synthesis of 55 derivatives with overall yields of up to 78 % demonstrates the wide applicability and advantages of the presented method.

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined Rh2O3 clusters in the zeolite which evolve under reaction conditions into single Rh3+ sites. These Rh3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H2 activation. In contrast to Rh2O3, confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO)2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions.

Improving the Selectivity of the C-C Coupled Product Electrosynthesis by Using Molecularly Imprinted Polymer─An Enhanced Route from Phenol to Biphenol

We developed a procedure for selective 2,4-dimethylphenol, DMPh, direct electro-oxidation to 3,3',5,5'-tetramethyl-2,2'-biphenol, TMBh, a C-C coupled product. For that, we used an electrode coated with a product-selective molecularly imprinted polymer (MIP). The procedure is reasonably selective toward TMBh without requiring harmful additives or elevated temperatures. The TMBh product itself was used as a template for imprinting. We followed the template interaction with various functional monomers (FMs) using density functional theory (DFT) simulations to select optimal FM. On this basis, we used a prepolymerization complex of TMBh with carboxyl-containing FM at a 1:2 TMBh-to-FM molar ratio for MIP fabrication. The template-FM interaction was also followed by using different spectroscopic techniques. Then, we prepared the MIP on the electrode surface in the form of a thin film by the potentiodynamic electropolymerization of the chosen complex and extracted the template. Afterward, we characterized the fabricated films by using electrochemistry, FTIR spectroscopy, and AFM, elucidating their composition and morphology. Ultimately, the DMPh electro-oxidation was performed on the MIP film-coated electrode to obtain the desired TMBh product. The electrosynthesis selectivity was much higher at the electrode coated with MIP film in comparison with the reference nonimprinted polymer (NIP) film-coated or bare electrodes, reaching 39% under optimized conditions. MIP film thickness and electrosynthesis parameters significantly affected the electrosynthesis yield and selectivity. At thicker films, the yield was higher at the expense of selectivity, while the electrosynthesis potential increase enhanced the TMBh product yield. Computer simulations of the imprinted cavity interaction with the substrate molecule demonstrated that the MIP cavity promoted direct coupling of the substrate to form the desired TMBh product.

Enhancing stability via confining Rh-P species in ZIF-8 for hydroformylation of 1-octene

The stability of Rh-based heterogeneous catalysts is a key issue in the hydroformylation of olefins. Confinement of active Rh species has been considered an effective strategy to achieve stable catalysts. In this work, a phosphine ligand was successfully confined in ZIF-8 material and coordinated with Rh metal by a reduction procedure to develop an efficient and stable Rh-based catalyst for hydroformylation of 1-octene. The results indicate that the catalyst reduced at 300 °C under H2 atmosphere exhibits better stability than that with NaBH4 as reductant and undoped P catalyst. Various characterization studies demonstrate that the superior performance is due to the strong interaction between Rh metal and P, which inhibits the leaching of active Rh species. This work reveals an effective strategy for the synthesis of highly stable catalysts for use in the hydroformylation reaction.

Pd-Catalyzed Regioselective Hydroformylation of Olefins with HCO2H and Its Derivatives

An effective Pd-catalyzed regioselective hydroformylation process with N-formylsaccharin or 2,4,6-trichlorophenyl formate along with formic acid is described. Linear aldehydes can be obtained in up to 83% yield and >20:1 l/b ratio. The reaction is operationally simple without the need for external CO and H2.

Activation of robust bonds by carbonyl complexes of Mn, Fe and Co

Metal carbonyl complexes possess among the most storied histories of any compound class in organometallic chemistry. Nonetheless, these old dogs continue to be taught new tricks. In this Feature, we review the historic discoveries and recent advances in cleaving robust bonds (e.g., C-H, C-O, C-F) using carbonyl complexes of three metals: Mn, Fe, and Co. The use of Mn, Fe, and Co carbonyl catalysts in controlling selectivity during hydrofunctionalization reactions is also discussed. The chemistry of these earth-abundant metals in the field of robust bond functionalization is particularly relevant in the context of sustainability. We expect that an up-to-date perspective on these seemingly simple organometallic species will emphasize the wellspring of reactivity that continues to be available for discovery.

Recent Advances On Direct Formylation Reactions

Aldehydes serve as the key functional group in organic synthesis and are valuable intermediates. The various advanced methods of direct formylation reactions have been reviewed in this article. Overcoming the drawbacks of the traditional methods of formylation, newer methods involving homo and heterogenous catalysts, one pot reactions, solvent free techniques are elaborated, which can be performed under mild conditions and using inexpensive resources.

Arene Insertion with Pincer-Supported Molybdenum-Hydrides: Determination of Site Selectivity, Relative Rates, and Arene Complex Formation

The synthesis of phosphino(oxazoline)pyridine-supported molybdenum(0) cycloocta-1,5-diene complexes is described. Exposure of these complexes to dihydrogen in the presence of an arene resulted in insertion of the substrate into the molybdenum hydride bond and afforded the corresponding molybdenum cyclohexadienyl hydrides. For mono- and disubstituted arenes, the site selectivity for insertion of the most substituted bond increases with increasing size of the substituent from methyl to ethyl, iso-propyl, and tert-butyl. In contrast, 1,3,5-trisubstituted arenes underwent insertion with exclusive site selectivity. Relative rates of insertion were determined by competition experiments and established faster insertions for electron-rich arenes. Introduction of electron-withdrawing trifluoromethyl groups on the arene resulted in decreased relative rates of insertion and an increased rate for H2 reductive elimination, favoring formation of the corresponding molybdenum η6-arene complex. Studies on the reductive elimination of the cyclohexadienyl ligand with the hydride enabled the synthesis of an enantioenriched cyclohexa-1,3-diene. This study provides new insights into the ligand requirements for catalytic arene hydrogenation and a new strategy for selective arene reduction.

Asymmetric Intramolecular Hydroalkylation of Internal Olefin with Cycloalkanone to Directly Access Polycyclic Systems

An asymmetric intramolecular hydroalkylation of unactivated internal olefins with tethered cyclic ketones was realized by the cooperative catalysis of a newly designed chiral amine (SPD-NH2 ) and PdII complex, providing straightforward access to either bridged or fused bicyclic systems containing three stereogenic centers with excellent enantioselectivity (up to 99 % ee) and diastereoselectivity (up to >20 : 1 dr). Notably, the bicyclic products could be conveniently transformed into a diverse range of key structures frequently found in bioactive terpenes, such as Δ6 -protoilludene, cracroson D, and vulgarisins. The steric hindrance between the Ar group of the SPD-NH2 catalyst and the branched chain of the substrate, hydrogen-bonding interactions between the N-H of the enamine motif and the C=O of the directing group MQ, and the counterion of the PdII complex were identified as key factors for excellent stereoinduction in this dual catalytic process by density functional theory calculations.

Direct Homogeneous Synthesis of Compounds with Two O Atoms and Long-Chain Hydrocarbons from CO and H2: Co-Ru/N-methylpyrrolidone Catalyst

The homogeneous acetic acid synthesis-type Ru-Co-Li/N-methylpyrrolidone catalyst for CO and H2 transformations has been studied at moderately high pressures. For 1CO:2H2, low acetic acid selectivity has been observed, along with remarkable methyl acetate selectivity, the absence of aldehydes and ethyl acetate and sharp deviations from the Anderson-Schultz-Flory distribution for both alcaohols and long-chain hydrocarbons. For 1CO:1H2 and slightly elevated pressure, acetic acid selectivity slightly increased, notable ethyl acetate formation was detected, and both long-chain hydrocarbons and alcohols disappeared. Hypotheses are discussed about the direct parallel formation of all observed product groups (hydrocarbons, alcohols, esters, and acetic acid) and hydrocarbon chain growth limitations according to the formed Ru-Co cluster size in the presence of the aforementioned catalytic system.

Palladium-Catalyzed Carbonylative Dearomatization of Indoles to Achieve Carbonyl-Containing Spirocyclic Indolenines Bearing an All-Carbon Quaternary Center

A Pd-catalyzed carbonylative dearomatization via an acyl Pd complex has been developed. Diversified carbonyl-containing spirocyclic indolenines with an all-carbon quaternary center were constructed in an efficient and straightforward way with good to excellent yields. The protocol features a simple catalytic system, operational simplicity, a broad substrate scope, easy scale-up, and versatile transformations. In addition, the asymmetric reaction was initially explored with moderate enantioselectivity.

A substrate descriptor based approach for the prediction and understanding of the regioselectivity in caged catalyzed hydroformylation

The use of data driven tools to predict the selectivity of homogeneous catalysts has received considerable attention in the past years. In these studies often the catalyst structure is varied, but the use of substrate descriptors to rationalize the catalytic outcome is relatively unexplored. To study whether this may be an effective tool, we investigated both an encapsulated and a non-encapsulated rhodium based catalyst in the hydroformylation reaction of 41 terminal alkenes. For the non-encapsulated catalyst, CAT2, the regioselectivity of the acquired substrate scope could be predicted with high accuracy using the Δ13C NMR shift of the alkene carbon atoms as a descriptor (R2 = 0.74) and when combined with a computed intensity of the CC stretch vibration (ICC stretch) the accuracy increased further (R2 = 0.86). In contrast, a substrate descriptor approach with an encapsulated catalyst, CAT1, appeared more challenging indicating a confined space effect. We investigated Sterimol parameters of the substrates as well as computer-aided drug design descriptors of the substrates, but these parameters did not result in a predictive formula. The most accurate substrate descriptor based prediction was made with the Δ13C NMR shift and ICC stretch (R2 = 0.52), suggestive of the involvement of CH-π interactions. To further understand the confined space effect of CAT1, we focused on the subset of 21 allylbenzene derivatives to investigate predictive parameters unique for this subset. These results showed the inclusion of a charge parameter of the aryl ring improved the regioselectivity predictions, which is in agreement with our assessment that noncovalent interactions between the phenyl ring of the cage and the aryl ring of the substrate are relevant for the regioselectivity outcome. However, the correlation is still weak (R2 = 0.36) and as such we are investigating novel parameters that should improve the overall regioselectivity outcome.

Iridium-phosphine ligand complexes as an alternative to rhodium-based catalysts for the efficient hydroformylation of propene

Expensive rhodium (Rh)-based catalysts have been widely used for the hydroformylation of propene. To find a cheaper and effective alternative to these Rh-based catalysts, herein, a series of phosphine ligands were used to coordinate with iridium, and their catalytic reactivities for the hydroformylation of propene were systematically investigated in this study. The effects of different phosphine ligands, pressures, temperatures, and catalyst dosages on the hydroformylation of propene were investigated. Tripyridyl phosphine iridium Ir2(cod)2Cl2-P(3-py)3 (Ir(I)-L5) and its derivatives exhibit the highest catalytic reactivity. Surprisingly, the catalytic reactivity of Ir(I)-L5 is higher than that of Rh2(cod)2Cl2-P(3-py)3 (Rh(I)-L5). When the Ir(I)-L5 complex is used as the catalyst, reactions performed in a polar solvent gave higher turnover number (TON) values than those in a non-polar solvent. Up to a TON of 503 can be obtained. Different n-butyraldehyde/iso-butyraldehyde (n/i) ratios can be obtained by adjusting the phosphine ligands or the proportion of gas pressure. The catalyst showed good reusability in five recycling experiments. Furthermore, based on DFT theoretical calculations, a probable reaction mechanism was proposed. It is reliable that an Ir-based catalyst can be considered as a highly effective catalyst for the hydroformylation of propylene with CO.

Precise Strain Tuning Boosts Electrocatalytic Hydrogen Generation

Strain engineering has been utilized as an effective approach to regulate the binding of reaction intermediates and modify catalytic behavior on noble metal nanocatalysts. However, the continuous, precise control of strain for a depiction of strain-activity correlation remains a challenge. Herein, Pd-based nanooctahedrons coated with two Ir overlayers are constructed, and subject to different postsynthetic treatments to alter the amount of H intercalated into Pd core for achieving three different surface strains (o-Pd/Ir-1.2%, o-Pd/Ir-1.7%, and o-Pd/Ir-2.1% NPs). It is demonstrated that the catalytic performances of o-Pd/Ir NPs display a volcano-shaped curve against strains toward the hydrogen evolution reaction (HER). Specifically, o-Pd/Ir-1.7% NPs exhibit superior catalytic performance with a mass activity of 9.38 A mgIr -1 at -0.02 V versus reversible hydrogen electrode, 10.8- and 18.8-fold higher than those of commercial Pt/C and Ir/C, respectively, making it one of the most active HER electrocatalysts reported to date. Density function theory calculations verify that the moderate tensile strain on Ir(111) surfaces plays a pivotal role in optimizing the H binding energy. This work highlights a new strategy for precise control over the surface strain of nanocrystals for more efficient electrocatalysis.

Formal Anti-Markovnikov Addition of Water to Olefins by Titanocene-Catalyzed Epoxide Hydrosilylation: From Stoichiometric to Sustainable Catalytic Reactions

Here, the evolution of the titanocene-catalyzed hydrosilylation of epoxides that yields the corresponding anti-Markovnikov alcohols is summarized. The study focuses on aspects of sustainability, efficient catalyst activation, and stereoselectivity. The latest variant of the reaction employs polymethylhydrosiloxane (PMHS), a waste product of the Müller-Rochow process as terminal reductant, features an efficient catalyst activation with benzylMgBr and the use of the bench stable Cp₂TiCl₂ as precatalyst. The combination of olefin epoxidation and epoxide hydrosilylation provides a uniquely efficient approach to the formal anti-Markovnikov addition of H₂O to olefins.

Structure and Thermodynamic Hydricity in Cobalt(triphosphine)(monophosphine) Hydrides

The mononuclear cobalt hydride complex [HCo(triphos)(PMe3)], in which triphos = PhP(CH2CH2PPh2)2, was synthesized and characterized by X-ray crystallography and by 1H and 31P NMR spectroscopy. The geometry of the compound is a distorted trigonal bipyramid in which the axial positions are occupied by the hydride and the central phosphorus atom of the triphos ligand, while the PMe3 and terminal triphos donor atoms occupy the equatorial positions. Protonation of [HCo(triphos)(PMe3)] generates H2 and the Co(I) cation, [Co(triphos)(PMe3)]+, and this reaction is reversible under an atmosphere of H2 when the proton source is weakly acidic. The thermodynamic hydricity of HCo(triphos)(PMe3) was determined to be 40.3 kcal/mol in MeCN from measurements of these equilibria. The reactivity of the hydride is, therefore, well suited to CO2 hydrogenation catalysis. Density functional theory (DFT) calculations were performed to evaluate the structures and hydricities of a series of analogous cobalt(triphosphine)(monophosphine) hydrides where the phosphine substituents are systematically changed from Ph to Me. The calculated hydricities range from 38.5 to 47.7 kcal/mol. Surprisingly, the hydricities of the complexes are generally insensitive to substitution at the triphosphine ligand, as a result of competing structural and electronic trends. The DFT-calculated geometries of the [Co(triphos)(PMe3)]+ cations are more square planar when the triphosphine ligand possesses bulkier phenyl groups and more tetrahedrally distorted when the triphosphine ligand has smaller methyl substituents, reversing the trend observed for [M(diphosphine)2]+ cations. More distorted structures are associated with an increase in ΔGH-°, and this structural trend counteracts the electronic effect in which methyl substitution at the triphosphine is expected to yield smaller ΔGH-° values. However, the steric influence of the monophosphine follows the normal trend that phenyl substituents give more distorted structures and increased ΔGH-° values.

Rhodium nanoparticles supported on silanol-rich zeolites beyond the homogeneous Wilkinson's catalyst for hydroformylation of olefins

Hydroformylation is one of the largest industrially homogeneous processes that strongly relies on catalysts with phosphine ligands such as the Wilkinson's catalyst (triphenylphosphine coordinated Rh). Heterogeneous catalysts for olefin hydroformylation are highly desired but suffer from poor activity compared with homogeneous catalysts. Herein, we demonstrate that rhodium nanoparticles supported on siliceous MFI zeolite with abundant silanol nests are very active for hydroformylation, giving a turnover frequency as high as ~50,000 h^-1 that even outperforms the classical Wilkinson's catalyst. Mechanism study reveals that the siliceous zeolite with silanol nests could efficiently enrich olefin molecules to adjacent rhodium nanoparticles, enhancing the hydroformylation reaction.

Carbon-Carbon Bond Formation from Carbon Monoxide and Hydride: The Role of Metal Formyl Intermediates

Current examples of carbon chain production from metal formyl intermediates with homogeneous metal complexes are described in this Minireview. Mechanistic aspects of these reactions as well as the challenges and opportunities in using this understanding to develop new reactions of CO and H2 are also discussed.

Understanding the role of imidazolium-based ionic liquids in the electrochemical CO2 reduction reaction

The development of efficient CO2 capture and utilization technologies driven by renewable energy sources is mandatory to reduce the impact of climate change. Herein, seven imidazolium-based ionic liquids (ILs) with different anions and cations were tested as catholytes for the CO2 electrocatalytic reduction to CO over Ag electrode. Relevant activity and stability, but different selectivities for CO2 reduction or the side H2 evolution were observed. Density functional theory results show that depending on the IL anions the CO2 is captured or converted. Acetate anions (being strong Lewis bases) enhance CO2 capture and H2 evolution, while fluorinated anions (being weaker Lewis bases) favour the CO2 electroreduction. Differently from the hydrolytically unstable 1-butyl-3-methylimidazolium tetrafluoroborate, 1-Butyl-3-Methylimidazolium Triflate was the most promising IL, showing the highest Faradaic efficiency to CO (>95%), and up to 8 h of stable operation at high current rates (-20 mA & -60 mA), which opens the way for a prospective process scale-up.

Single-atom catalysts for hydroformylation of olefins

Hydroformylation is one of the most significant homogeneous reactions. Compared with homogeneous catalysts, heterogeneous catalysts are easy to be separated from the system. However, heterogeneous catalysis faces the problems of low activity and poor chemical/regional selectivity. Therefore, there are theoretical and practical significance to develop efficient heterogeneous catalysts. SACs can be widely applied in hydroformylation in the future, due to the high atom utilization efficiency, stable active sites, easy separation, and recovery. In this review, the recent advances of SACs for hydroformylation are summarized. The regulation of microstructure affected on the reactivity, stability of SACs, and chem/regioselectivity of SACs for hydroformylation are discussed. The support effect, ligand effect, and electron effect on the performance of SACs are proposed, and the catalytic mechanism of SACs is elaborated. Finally, we summarize the current challenges in this field, and propose the design and research ideas of SACs for hydroformylation of olefins.

Influence of Support Structure on Catalytic Performance of Supported Liquid-Phase (SLP) Catalysts in Hydroformylation of 1-Butene

Several supported liquid-phase (SLP) catalysts with immobilized Rh-biphephos complexes on monolithic supports were prepared and applied for continuous gas-phase hydroformylation (HyFo) of 1-butene. The support comprised macroporous monolithic silicon carbide (SiC) with deposited silica nanoparticles (NPs) in order to provide mesopores with enhanced capillary forces to retain the liquid-phase. Variable parameters were examined for the monolithic SiC supports, including size and loading of deposited silica NPs and intermediate calcination between silica deposition steps to obtain the most efficient support configuration for the SLP system. The SLP catalysts with larger deposited silica NPs gave higher catalytic activity (i.e. 1-butene conversion and turnover frequency) compared to the supports with smaller sized silica NPs. However, the selectivity towards the preferred linear aldehyde was higher in the SLP catalysts with supports containing less silica with small silica NPs. Importantly, the prepared SLP catalyst systems showed long-term stability in HyFo with negligible formation of high boiling aldol condensation products.

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N2 Reduction

We recently reported a reaction sequence that activates C-H bonds in simple arenes as well as the N-N triple bond in N₂, delivering the aryl group to N₂ to form a new N-C bond (Nature 2020, 584, 221). This enables the transformation of abundant feedstocks (arenes and N₂) into N-containing organic compounds. The key N-C bond forming step occurs upon partial silylation of N₂. However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N₂ must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)-NN(SiMe₃)₂ intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi₂ ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N-C bond formation offers a method for functionalizing N₂ using organometallic chemistry.

Cationic Rhodium(I)-Catalyzed Asymmetric Cyclohydroformylation of 1,6-Enynes with Formaldehyde

We report a rhodium(I)-catalyzed asymmetric cyclohydroformylation reaction of 1,6-enynes with formaldehyde. The reaction of 1,6-enynes with formaldehyde in the presence of a cationic Rh(I) catalyst, such as [Rh(cod)₂ ]⁺ OTf^- , and a chiral biaryl diphosphine led to asymmetric cyclohydroformylation to produce aldehydes with higher-order structures highly enantioselectively. This transformation procedure is applicable to a variety of enynes, with wide compatibility in various atoms liking between the alkyne and alkene parts, substituents at the alkyne terminus, and substituents at the alkene part, being converted to newly formed aldehydes in 14% to 90% yields with 50% to 98% ee. The products were further transformed with various nucleophiles to alcohols, an amine, and a diene without loss of chirality at their γ-position.

KOH-Enabled Axial-Oxygen Coordinated Ni Single-Atom Catalyst for Efficient Electrocatalytic CO2 Reduction

Precise control of the coordination structure of metal centers is an ideal approach to achieve reasonable selectivity, activity, and stability in the electrochemical reduction of CO₂ . In this work, the KOH activation strategy for preparation of hierarchically porous material containing Ni single-atoms with axial-oxygen coordination is reported. Spectroscopic measurements reveal the multiple roles of KOH as oxygen source, pore-making reagent and promoter for the formation of key phthalocyanine structure. It exhibits superior surface area (1801 m²  g^-1 ) and electrocatalytic performance (Faradaic efficiency of 94%, Turnover frequency of 11 362 h^-1 ). Notably, KOH-enabled architecture with abundant pores benefits the anchoring of Ni atoms and mass transfer for high activity and selectivity. Density functional theory calculations suggest that the axial-oxygen ligand can promote the electronic delocalization of the Ni site for facilitating the *COOH formation and *CO desorption to efficiently produce CO.

Utilizing CO2 as a Reactant for C3 Oxygenate Production via Tandem Reactions

One possible solution to closing the loop on carbon emissions is using CO2 as the carbon source to generate high-value, multicarbon products. In this Perspective, we describe four tandem reaction strategies for converting CO2 into C3 oxygenated hydrocarbon products (i.e., propanal and 1-propanol), using either ethane or water as the hydrogen source: (1) thermocatalytic CO2-assisted dehydrogenation and reforming of ethane to ethylene, CO, and H2, followed by heterogeneous hydroformylation, (2) one-pot conversion of CO2 and ethane using plasma-activated reactions in combination with thermocatalysis, (3) electrochemical CO2 reduction to ethylene, CO, and H2, followed by thermocatalytic hydroformylation, and (4) electrochemical CO2 reduction to CO, followed by electrochemical CO reduction to C3 oxygenates. We discuss the proof-of-concept results and key challenges for each tandem scheme, and we conduct a comparative analysis of the energy costs and prospects for net CO2 reduction. The use of tandem reaction systems can provide an alternative approach to traditional catalytic processes, and these concepts can be further extended to other chemical reactions and products, thereby opening new opportunities for innovative CO2 utilization technologies.

Nested Metal Catalysts: Metal Atoms and Clusters Stabilized by Confinement with Accessibility on Supports

Supported catalysts that are important in technology prominently include atomically dispersed metals and metal clusters. When the metals are noble, they are typically unstable-susceptible to sintering-especially under reducing conditions. Embedding the metals in supports such as organic polymers, metal oxides, and zeolites confers stability on the metals but at the cost of catalytic activity associated with the lack of accessibility of metal bonding sites to reactants. An approach to stabilizing noble metal catalysts while maintaining their accessibility involves anchoring them in molecular-scale nests that are in or on supports. The nests include zeolite pore mouths, zeolite surface cups (half-cages), raft-like islands of oxophilic metals bonded to metal oxide supports, clusters of non-noble metals (e.g., hosting noble metals as single-atom alloys), and nanoscale metal oxide islands that selectively bond to the catalytic metals, isolating them from the support. These examples illustrate a trend toward precision in the synthesis of solid catalysts, and the latter two classes of nested catalysts offer realistic prospects for economical large-scale application.

Ethene Hydroformylation Catalyzed by Rhodium Dispersed with Zinc or Cobalt in Silanol Nests of Dealuminated Zeolite Beta

Catalysts for hydroformylation of ethene were prepared by grafting Rh into nests of ≡SiOZn-OH or ≡SiOCo-OH species prepared in dealuminated BEA zeolite. X-ray absorption spectra and infrared spectra of adsorbed CO were used to characterize the dispersion of Rh. The Rh dispersion was found to increase markedly with increasing M/Rh (M = Zn or Co) ratio; further increases in Rh dispersion occurred upon use for ethene hydroformylation catalysis. The turnover frequency for ethene hydroformylation measured for a fixed set of reaction conditions increased with the fraction of atomically dispersed Rh. The ethene hydroformylation activity is 15.5-fold higher for M = Co than for M = Zn, whereas the propanal selectivity is slightly greater for the latter catalyst. The activity of the Co-containing catalyst exceeds that of all previously reported Rh-containing bimetallic catalysts. The rates of ethene hydroformylation and ethene hydrogenation exhibit positive reaction orders in ethene and hydrogen but negative orders in carbon monoxide. In situ IR spectroscopy and the kinetics of the catalytic reactions suggest that ethene hydroformylation is mainly catalyzed by atomically dispersed Rh that is influenced by Rh-M interactions, whereas ethene hydrogenation is mainly catalyzed by Rh nanoclusters. In situ IR spectroscopy also indicates that the ethene hydroformylation is rate limited by formation of propionyl groups and by their hydrogenation, a conclusion supported by the measured H/D kinetic isotope effect. This study presents a novel method for creating highly active Rh-containing bimetallic sites for ethene hydroformylation and provides new insights into the mechanism and kinetics of this process.

Rhodium-Catalyzed Formylation of Unactivated Alkyl Chlorides to Aldehydes

The first rhodium-catalyzed formylation of non-activated alkyl chlorides with syn gas (H2 /CO) allows to produce aldehydes in high yields (25 examples). A catalyst optimization study revealed Rh(acac)(CO)2 in the presence of 1,3-bisdiphenylphosphinopropane (DPPP) as the most active catalyst system for this transformation. Key for the success of the reaction is the addition of sodium iodide (NaI) to the reaction system, which leads to the formation of activated alkyl iodides as intermediates. Depending on the reaction conditions, either the linear or branched aldehydes can be preferentially obtained, which is explained by a different mechanism.

Water-Soluble Pd Nanoparticles for the Anti-Markovnikov Oxidation of Allyl Benzene in Water

The catalytic activity and selectivity of two different water-soluble palladium nanoparticles capped with 5-(trimethylammonio)pentanethiolate and 6-(carboxylate)hexanethiolate ligands are investigated using the catalytic reaction of allyl benzene. The results show that the regioselective transformation of allyl benzene to 3-phenylpropanal occurs at room temperature and under atmospheric pressure in neat water via a Tsuji-Wacker type oxidation. Conventionally, the Tsuji-Wacker oxidation promotes the Markovnikov oxidation of terminal alkenes to their respective ketones in the presence of dioxygen. Water-soluble Pd nanoparticles, however, catalyze the anti-Markovnikov oxidation of allyl benzene to 3-phenylpropanal in up to 83% yields. Catalytic results of other aromatic alkenes suggest that the presence of benzylic hydrogen is a key to the formation of a p-allyl Pd intermediate and the anti-Markovnikov addition of H₂O. The subsequent b-H elimination and tautomerization contribute to the formation of aldehyde products. Water-soluble Pd nanoparticles are characterized using nuclear magnetic resonance (NMR), UV-vis spectroscopy, thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). Catalysis results are examined using ¹H NMR and/or GC-MS analyses of isolated reaction mixtures.

Temperature-Controlled Syngas Production via Electrochemical CO2 Reduction on a CoTPP/MWCNT Composite in a Flow Cell

The mixture of CO and H₂, known as syngas, is a building block for many substantial chemicals and fuels. Electrochemical reduction of CO₂ and H₂O to syngas would be a promising alternative approach for its synthesis due to negative carbon emission footprint when using renewable energy to power the reaction. Herein, we present temperature-controlled syngas production by electrochemical CO₂ and H₂O reduction on a cobalt tetraphenylporphyrin/multiwalled carbon nanotube (CoTPP/MWCNT) composite in a flow cell in the temperature range of 20-50 °C. The experimental results show that for all the applied potentials the ratio of H₂/CO increases with increasing temperature. Interestingly, at -0.6 V _RHE and 40 °C, the H₂/CO ratio reaches a value of 1.2 which is essential for the synthesis of oxo-alcohols. In addition, at -1.0 V _RHE and 20 °C, the composite shows very high selectivity toward CO formation, reaching a Faradaic efficiency of ca. 98%. This high selectivity of CO formation is investigated by density functional theory modeling which underlines that the potential-induced oxidation states of the CoTPP catalyst play a vital role in the high selectivity of CO production. Furthermore, the stability of the formed intermediate species is evaluated in terms of the pK_a value for further reactions. These experimental and theoretical findings would provide an alternative way for syngas production and help us to understand the mechanism of molecular catalysts in dynamic conditions.

Microwave-assisted synthesis of octahedral Rh nanocrystals and their performance for electrocatalytic oxidation of formic acid

Uniform and well-defined octahedral Rh nanocrystals were rapidly synthesized in a domestic microwave oven for only 140 s of irradiation by reducing Rh(acac)₃ with tetraethylene glycol (TEG) as both a solvent and a reducing agent in the presence of an appropriate amount of KI, didecyl dimethyl ammonium chloride (DDAC), ethylene diamine (EDA) and polyvinylpyrrolidone (PVP). KI, DDAC and EDA were essential for the creation of octahedral Rh nanocrystals. Electrochemical measurements showed a significantly enhanced electrocatalytic activity and stability for the as-prepared octahedral Rh nanocrystals compared with commercial Rh black.

Formyl Radical Generation from α-Chloro N-Methoxyphthalimides Enables Selective Aldehyde Synthesis

The aldehydes installation by radical formylation constitutes an attractive synthetic strategy. However, the generation of formyl radicals for organic synthesis applications remains unknown. Herein we report the first formyl radical generation from α-chloro N-methoxyphthalimides, which selectively synthesize aldehydes by alkene hydroformylation under mild photoredox conditions. The aldehydes can be installed on acrylates, acrylamides, vinyl sulfones, vinyl ketones, and complex steroids by radical hydroformylation in excellent chemoselectivity and regioselectivity. The concerted hydrochloride elimination for the formyl radical generation from α-chloro methoxy radicals is established by experimental and computational approaches.

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation

A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO₂ uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO₂ , is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media.

Catalytic utilization of converter gas – an industrial waste for the synthesis of pharmaceuticals

From waste to value. An efficient and convenient ruthenium-catalyzed reduction of aromatic nitro compounds using converter gas as a reducing agent to produce valuable pharmaceuticals has been developed.

Surface and Interface Coordination Chemistry Learned from Model Heterogeneous Metal Nanocatalysts: From Atomically Dispersed Catalysts to Atomically Precise Clusters

The surface and interface coordination structures of heterogeneous metal catalysts are crucial to their catalytic performance. However, the complicated surface and interface structures of heterogeneous catalysts make it challenging to identify the molecular-level structure of their active sites and thus precisely control their performance. To address this challenge, atomically dispersed metal catalysts (ADMCs) and ligand-protected atomically precise metal clusters (APMCs) have been emerging as two important classes of model heterogeneous catalysts in recent years, helping to build bridge between homogeneous and heterogeneous catalysis. This review illustrates how the surface and interface coordination chemistry of these two types of model catalysts determines the catalytic performance from multiple dimensions. The section of ADMCs starts with the local coordination structure of metal sites at the metal-support interface, and then focuses on the effects of coordinating atoms, including their basicity and hardness/softness. Studies are also summarized to discuss the cooperativity achieved by dual metal sites and remote effects. In the section of APMCs, the roles of surface ligands and supports in determining the catalytic activity, selectivity, and stability of APMCs are illustrated. Finally, some personal perspectives on the further development of surface coordination and interface chemistry for model heterogeneous metal catalysts are presented.

Transition metal-free ketene formation from carbon monoxide through isolable ketenyl anions

The capacity of transition metals to bind and transform carbon monoxide (CO) is critical to its use in many chemical processes as a sustainable, inexpensive C1 building block. By contrast, only few s- and p-block element compounds bind and activate CO, and conversion of CO into useful carbonyl-containing organic compounds in such cases remains elusive. We report that metalated phosphorus ylides provide facile access to ketenyl anions ([RC=C=O]^-) by phosphine displacement with CO. These anions are very stable and storable reagents with a distinctive electronic structure between that of the prototypical ketene (H₂C=C=O) and that of ethynol (HC≡C-OH). Nonetheless, the ketenyl anions selectively react with a range of electrophiles at the carbon atom, thus offering high-yielding and versatile access to ketenes and related compounds.