A New Photoactive Crystalline Highly Porous Titanium(IV) Dicarboxylate

A universal design of turn-on fluorescent aptasensor based on luminescent MOFs: Application for the detection of bisphenol A in water, milk and chicken samples

A universal design of turn-on fluorescent aptasensor based on aptamer functionalized gold nanoparticles (AuNPs) and luminescent metal-organic frameworks (LMOFs) complex (AuNPs-Apt/NH₂-MIL-125(Ti)) was realized for bisphenol A (BPA) detection. LMOF NH₂-MIL-125(Ti) was prepared using facial hydrothermal method. BPA aptamer functionalized AuNPs were prepared and adsorbed on the surface of NH₂-MIL-125(Ti) to obtain platform of the fluorescent aptasensor. The fabrication process, sensing performance and applicability of the proposed aptasensor were characterized and investigated carefully. Linear detection range of the constructed aptasensor was from 1 × 10^-9 mol L^-1 to 1 × 10^-4 mol L^-1 with good selectivity, repeatability, stability and reproducibility under optimal experimental conditions. Meanwhile, the fluorescent aptasensor was successfully utilized for BPA detection in real samples with the recoveries of 95.80%-103.12%. The proposed aptasensor based on AuNPs-Apt/NH₂-MIL-125(Ti) holds significant potential for BPA detection in environmental and food samples, promoting the construction and application of LMOFs-based aptasensor.

Ligand field tuning of d-orbital energies in metal-organic framework clusters

Linker functionalization is a common route used to affect the electronic and catalytic properties of metal-organic frameworks. By either pre- or post-synthetically installing linkages with differing linker moieties the band gap, workfunction, and exciton lifetimes have been shown to be affected. One overlooked aspect of linker functionalization, however, has been the impact on the metal d-orbital energies to which they are bound. The ligand field differences should result in substantial changes in d-splitting. In this study we use density functional theory (DFT) to study the energetics of d-orbital energy tuning as a function of linker chemistry. We offer a general descriptor, linker pK_a, as a tool to predict resultant band energies in metal-organic frameworks (MOFs). Our calculations reveal that simple functionalizations can affect the band energies, of primarily metal d lineage, by up to 2 eV and illustrate the significance of this band modularity using four archetypal MOFs: UiO-66, MIL-125, ZIF-8, and MOF-5. Together, we show that linker functionalization dramatically affects d-energies in MOF clusters and highlight that linker functionalization is a useful route for fine-tuning band edges centered on the metals, rather than linkers themselves.

High-Porosity Metal-Organic Framework Glasses

We report a synthetic strategy to link titanium-oxo (Ti-oxo) clusters into metal-organic framework (MOF) glasses with high porosity though the carboxylate linkage. A new series of MOF glasses was synthesized by evaporation of solution containing Ti-oxo clusters Ti16 O16 (OEt)32 , linkers, and m-cresol. The formation of carboxylate linkages between the Ti-oxo clusters and the carboxylate linkers was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. The structural integrity of the Ti-oxo clusters within the glasses was evidenced by both X-ray absorption near edge structure (XANES) and 17 O magic-angle spinning (MAS) NMR. After ligand exchange and activation, the fumarate-linked MOF glass, termed Ti-Fum, showed a N2 Brunauer-Emmett-Teller (BET) surface areas of 923 m2  g-1 , nearly three times as high as the phenolate-linked MOF glass with the highest BET surface area prior to this report.

NH2-MIL-125(Ti)/Reduced Graphene Oxide Enhanced Electrochemical Detection of Fenitrothion in Agricultural Products

The abuse of organophosphate pesticides causes serious threats to human health, which threatens approximately 3 million people and leads to more than 2000 deaths each year. Therefore, it is necessary to determine the residue of fenitrothion (FT) in environmental and food samples. Herein, we developed a non-enzymatic electrochemical sensor with differential pulse voltammetry signal output to determine FT in model solutions and spiked samples. Delicately, the sensor was designed based on the fabrication of hydrothermally synthesized titanium-based metal-organic frameworks (MOFs) material (NH2-MIL-125(Ti))/reduced graphene oxide (RGO) (NH2-MIL-125(Ti)/RGO) nanocomposites for better target enrichment and electron transfer. The peak response of differential pulse voltammetry for FT under optimized conditions was linear in the range of 0.072–18 μM with the logarithm of concentrations, and the detection limit was 0.0338 μM. The fabricated sensor also demonstrated high stability and reproducibility. Moreover, it exhibited excellent sensing performances for FT in spiked agricultural products. The convenient fabrication method of NH2-MIL-125(Ti)/RGO opens up a new approach for the rational design of non-enzymatic detection methods for pesticides.

Isolation of Cytochrome C for Proteomics with Lindqvist-type Polyiodate Modified Metal Organic Framework

Separation and purification of Cytochrome C (Cyt-C) is important for proteomic. High efficient and selective pretreatment method for Cyt-C in real samples are always needed. Herein, polyniobate (K₇H[Nb₆O₁₉]·13H₂O, Nb₆O₁₉) is modified on a metal-organic framework MIL-125(Ti) through intermolecular hydrogen bonds and an aqueous-stable composite Nb₆O₁₉/MIL-125(Ti) is successfully prepared to pretreat complex protein sample. Protein adsorption studies have shown that Nb₆O₁₉/MIL-125(Ti) can promote the selective adsorption of Cyt-C due to the synergistic effect of electrostatic and hydrogen-bond interactions. At pH=10.0 (Britton-Robinson buffer), the adsorption efficiency of 300 μL 100 μg·mL^-1 Cyt-C onto 1.0 mg Nb₆O₁₉/MIL-125(Ti) can reach 99.5%. The adsorption behavior of Cyt-C fits well with the Langmuir adsorption model, corresponding to a maximum theoretical adsorption capacity of 168.35 mg·g^-1. Using 3 mol·L^-1 NaCl as the eluent, a high elution efficiency of 92.19% is obtained. In addition, the results of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis confirm that Nb₆O₁₉/MIL-125(Ti) efficiently adsorbed Cyt-C from scrofa heart extraction. LC-MS/MS spectrometry results show that the purification of Cyt-C reduces the abundance from the 12th to the 154th place after Nb₆O₁₉/MIL-125(Ti) treatment. Moreover, low abundant proteins, e.g., Superoxide dismutase 1, IF rod domain-containing protein and Ubiquitin-60S ribosomal protein L40 were considerably enriched. These outcomes confirm the practicability of Nb₆O₁₉/MIL-125 (Ti) as a Cyt-C extractant has potential application value in scrofa heart proteomics.

Bodipy-Based Metal-Organic Frameworks Transformed in Solid States from 1D Chains to 2D Layer Structures as Efficient Visible Light Heterogeneous Photocatalysts for Forging C-B and C-C Bonds

Boron dipyrromethene (also known as bodipy), as a class of versatile and robust fluorophores and a structural analogue of porphyrins, has received a great deal of interests in the field of light-harvesting and energy-transfer processes. However, the fabrication of bodipy monomers into metal-organic frameworks (MOFs) and the exploitation of their potential still lags behind the porphyrin MOFs. In this work, two bodipy-based MOFs, BMOF 1D with 1D chain structure and BMOF 2D with 2D layer structure, were assembled by using dicarboxyl-functionalized bodipy ligands. BMOF 1D can also be converted to BMOF 2D by inserting additional ligands into BMOF 1D to cross-link the adjacent chains into the rhombic grid layer. During this process, spontaneous exfoliation occurred simultaneously and resulted in the formation of several hundred nanometer thickness BMOF 2D (nBMOF 2D), which can be further exfoliated into one-layer MOF nanosheets (BMON 2D) by using the ultrasonic liquid exfoliation method in a high yield. Featuring the distinct bodipy scaffolds in the porous frameworks, both BMOF 2D and BMON 2D displayed high reactivity and recyclability in the photocatalytic inverse hydroboration and cross-dehydrogenative coupling reactions to afford α-amino organoborons and α-amino amides in moderate to high yields. This work not only highlights the cascade utilization of ligand installation and ultrasonic liquid exfoliation methods to provide the single-layer MOF sheets in high yields but also advances the bodipy-based MOFs as a new type of heterogeneous photocatalysts in the forging of C-B and C-C bonds driven by visible light.

A robust and porous titanium metal-organic framework for gas adsorption, CO2 capture and conversion

A robust and porous titanium metal-organic framework (Ti-MOF; LCU-402) has been hydrothermally synthesized through combining a tetranuclear Ti2Ca2(μ3-O)2(μ2-H2O)1.3(H2O)4(O2C-)8 cluster and a tritopic 1,3,5-benzene(tris)benzoic (BTB) ligand. LCU-402 shows remarkable stability and permanent porosity for CO2, CH4, C2H2, C2H4, and C2H6 gas adsorption. Moreover, LCU-402 as a heterogeneous catalyst can smoothly convert CO2 under a simulated flue atmosphere into organic carbonate molecules by cycloaddition reactions of CO2 and epoxides, indicating that LCU-402 might be a promising catalyst candidate in practical applications. We are confident that the identification of a persistent titanium-oxo building unit would accelerate the development of new porous Ti-MOF materials.

Structure-Activity Relationship Insights for Organophosphonate Hydrolysis at Ti(IV) Active Sites in Metal-Organic Frameworks

Organophosphorus nerve agents are among the most toxic chemicals known and remain threats to humans due to their continued use despite international bans. Metal-organic frameworks (MOFs) have emerged as a class of heterogeneous catalysts with tunable structures that are capable of rapidly detoxifying these chemicals via hydrolysis at Lewis acidic active sites on the metal nodes. To date, the majority of studies in this field have focused on zirconium-based MOFs (Zr-MOFs) that contain hexanuclear Zr(IV) clusters, despite the large toolbox of Lewis acidic transition metal ions that are available to construct MOFs with similar catalytic properties. In particular, very few reports have disclosed the use of a Ti-based MOF (Ti-MOF) as a catalyst for this transformation even though Ti(IV) is a stronger Lewis acid than Zr(IV). In this work, we explored five Ti-MOFs (Ti-MFU-4l, NU-1012-NDC, MIL-125, Ti-MIL-101, MIL-177(LT), and MIL-177(HT)) that each contains Ti(IV) ions in unique coordination environments, including monometallic, bimetallic, octanuclear, triangular clusters, and extended chains, as catalysts to explore how both different node structures and different linkers (e.g., azolate and carboxylate) influence the binding and subsequent hydrolysis of an organophosphorus nerve agent simulant at Ti(IV)-based active sites in basic aqueous solutions. Experimental and theoretical studies confirm that Ti-MFU-4l, which contains monometallic Ti(IV)-OH species, exhibits the best catalytic performance among this series with a half-life of roughly 2 min. This places Ti-MFU-4l as one of the best nerve agent hydrolysis catalysts of any MOF reported to date.

Boosting Catalytic Performance of MOF-808(Zr) by Direct Generation of Rich Defective Zr Nodes via a Solvent-Free Approach

Creation of rich open metal sites (defect) on the nodes of metal-organic frameworks (MOFs) is an efficient approach to enhance their catalytic performance in heterogeneous reactions; however, direct generation of such defects remains challenging. In this contribution, we developed an in situ green route for rapid fabrication of defective MOF-808(Zr) with rich Zr-OH/OH₂ sites (occupying 25% Zr coordination sites) and hierarchical porosity without the assistance of formic acid and solvent. The optimal MOF-808(Zr) not only displayed superior activity in oxidative desulfurization (ODS) for removing 1000 ppm sulfur at ambient temperature within 20 min but also could convert 3.8 mmol of benzaldehyde to (dimethoxymethyl)benzene within 90 s at 30 °C. The turnover frequencies reached 45.4 h^-1 for ODS and 3451 h^-1 for acetalization, outperforming the most reported MOF-based catalysts. Theoretical calculation and experimental results show that the formed Zr-OH/OH₂ can react with H₂O₂ to generate peroxo-zirconium species, which readily oxidize the sulfur compound. Our work provides a new approach to the synthesis of defect-rich MOF-808(Zr) with the accessibility of active sites for target reactions.

Synergistic Steric and Electronic Effects on the Photoredox Catalysis by a Multivariate Library of Titania Metal-Organic Frameworks

Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti₆O₉[links]₃, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti₆O₉(CO₂)₆]_∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.

High-Valence Metal-Organic Framework Materials Constructed from Metal-Oxo Clusters: Opportunities and Challenges

Metal-organic framework (MOF), which possesses stable framework structure constructed by highly connected metal-oxo cluster nodes and organic linkers, has shown great promise in gas storage, adsorption, and separation, owing to the high surface areas, tunable pore aperture, and rich functional groups. In this review article, we summarized recent progress made in synthesizing high-valence MOF (e. g., UiO-66, MIL-125, PCN-22, and MIP-207) with metal-oxo cluster as metal source. Of particular note, recent breakthroughs in the preparation of UiO-66 and MIL-125 membranes with the corresponding Zr₆ -oxo and Ti₈ -oxo cluster sources (e. g., Zr₆ O₄ (OH)₄ (OAc)₁₂ and Ti₈ O₈ (OOCR)₁₆ clusters) possessing superior separation performance were highlighted. In the end, an outlook on the preparation of versatile high-valence MOF membranes with the corresponding metal-oxo clusters as metal sources was highlighted.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Two Dual-Function Zr/Hf-MOFs as High-Performance Proton Conductors and Amines Impedance Sensors

In the field of sensing, finding high-performance amine molecular sensors has always been a challenging topic. Here, two highly stable 3D MOFs DUT-67(Hf) and DUT-67(Zr) with large specific surface areas and hierarchical pore structures were conveniently synthesized by solvothermal reaction of ZrCl₄/HfCl₄ with a simple organic ligand, 2,5-thiophene dicarboxylic acid (H₂TDC) according to literature approach. By analyzing TGA data, it was found that the two MOFs have defects (unsaturated metal sites) that can interact with substrates (H₂O and volatile amine gas), which is conducive to proton transfer and amine compound identification. Further experiments showed that at 100 °C and 98% relative humidity (RH), the optimized proton conductivities of DUT-67(Zr) and DUT-67(Hf) can reach the high values of 2.98 × 10^-3 and 3.86 × 10^-3 S cm^-1, respectively. Moreover, the room temperature sensing characteristics of MOFs' to amine gases were evaluated at 68, 85 and 98% RHs, respectively. Impressively, the prepared MOFs-based sensors have the desired stability and higher sensitivity to amines. Under 68% RH, the detection limits of DUT-67(Zr) or DUT-67(Hf) for volatile amine gases were 0.5 (methylamine), 0.5 (dimethylamine) and 1 ppm (trimethylamine), and 0.5 (methylamine), 0.5 (dimethylamine) and 0.5 ppm (trimethylamine), respectively. As far as we know, this is the best performance of ammonia room temperature sensors in the past proton-conductive MOF sensors.

A protocol of carbonized on-column enrichment for urinary exosomal N-glycans profiling

As a widely present vesicle, exosome plays an important role in lots of biological processes due to its inclusive cargos. In particular, exosome glycan cargo is attracting attentions since its aberrant alteration is closely related to many progressions in diseases. In this work, a novel carbonized packing capillary trap column for urinary exosomal N-glycan enrichment was proposed. The carbonized packing exhibited large specific surface area, mesoporous structure with narrow pore size distribution and abundant carbon for specially interacting with oligosaccharides. Benefitting from all these advantages, the N-glycans deriving from standard glycoproteins or complex human urine exosomes could be identified with high sensitivity and selectivity. Finally, from the glycans identified in healthy volunteers and patients with bladder carcinoma, we observed that 10 of glycans shared by two groups were obvious downregulation and the 18 were upregulation. These results show great potential of capillary trap column as a tool for the enrichment and detection of glycans in exosomal, attracting more attention on disease progression monitoring and biomarker discovery.

The Composites of PCL and Tetranuclear Titanium(IV)-Oxo Complex with Acetylsalicylate Ligands-Assessment of Their Biocompatibility and Antimicrobial Activity with the Correlation to EPR Spectroscopy

In our research, we have focused on the biological studies on composite materials produced by the dispersion of titanium(IV)-oxo complex (TOC) with acetylsalicylate ligands in a poly(ε-caprolactone) (PCL) matrix, which is a biodegradable thermoplastic polymer increasingly used in the production of medical devices. Using PCL as a matrix for the biologically active compounds, such as antimicrobial agents, antibiotics or other active medical substances, from which these individuals can be gradually released is fully understable. Composites of PCL + nTOC (n = 10, 15 and 20 wt.%) have been produced and, in such a form, the biological properties of TOCs have been estimated. Direct and indirect cytotoxicity studies have been performed in vitro on L929 and human umbilical vein endothelial cells (HUVEC) cell lines. The antibacterial and antifungal activity of the PCL + TOC samples have been assessed against two Staphylococcus aureus (ATCC 6538 and ATCC 25923) reference strains, two Escherichia coli (ATCC 8739 and ATCC 25922) reference strains and yeast of Candida albicans ATCC 10231. Obtained results have been correlated with electron paramagnetic resonance (EPR) spectroscopy data. We could conclude that photoexcitation by visible light of the surface of PCL + nTOC composite foils lead to the formation of different paramagnetic species, mainly O^-, which slowly disappears over time; however, their destructive effect on bacteria and cells has been proven.

Nitrogen and titanium-codoped porous carbon nanocomposites derived from metal-organic framework as cathode to address polysulfides shuttle effects by Ti-assisted N-inhibiting strategy

To address the problem of shutting effect of Li-S batteries, we used Ti-based MOF as precursor to obtain a conductive matrix with dual inhibitors. The target material, namely NTiPC, shown remarkable discharge capacity with 1178 mA h g^-1, and maintained at 732 mA h g^-1 after 100 cycles. The results indicated the N- and Ti-active sites synergistic acted with conductive framework can facilitate binding reaction between matrix and polysulfides.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

In situ Cu single atoms anchoring on MOF-derived porous TiO2 for the efficient separation of photon-generated carriers and photocatalytic H2 evolution

Single atom catalysts (SACs) have an extremely high atom utilization and distinctive structures and properties in the field of photocatalysis. However, the premise of conducting scientific research and applications is still the stability and catalytic activity of single atoms on suitable substrates. Metal organic frameworks (MOFs), as one of the most suitable single-atom substrates, have tunable internal structures, unsaturated coordination bonds, and high specific surface areas. In this work, Ti-based MOF, MIL-125, was adopted as the precursor to prepare mesoporous Cu-loaded TiO₂. During the synthesis of MIL-125, a Cu source was added, and Cu atoms were fixed by partly replacing Ti atoms in the Ti-O octahedron to coordinate with O atoms, resulting in a good dispersity, good stability and high loading amount. Experimental investigations demonstrated that dispersed Cu single atoms act as reaction centres, besides being able to accelerate the transfer of photoelectrons. Under simulated sunlight, the H₂ evolution rate of the optimum Cu-TiO₂ sample reaches 17.77 mmol g^-1 h^-1, nearly 101 times higher than that of the pure mesoporous TiO₂. The apparent quantum efficiency (AQE) is 20.15% under 365 nm irradiation. This research opens a new thinking to preparing high stability and high activity single atom photocatalysts.

Diagnosing, Typing, and Staging of Renal Cell Carcinoma by Designer Matrix-Based Urinary Metabolic Analysis

Molecular diagnosing, typing, and staging have been considered to be the ideal alternatives of imaging-based detection methods in clinics. Designer matrix-based analytical tools, with high speed, throughout, efficiency and low/noninvasiveness, have attracted much attention recently for in vitro metabolite detection. Herein, we develop an advanced metabolic analysis tool based on highly porous metal oxides derived from available metal-organic frameworks (MOFs), which elaborately inherit the morphology and porosity of MOFs and newly incorporate laser adsorption capacity of metal oxides. Through optimized conditions, direct high-quality fingerprinting spectra in 0.5 μL of urine are acquired. Using these fingerprinting spectra, we can discriminate the renal cell carcinoma (RCC) from healthy controls with higher than 0.99 of area under the curve (AUC) values (R²Y(cum) = 0.744, Q² (cum) = 0.880), as well, from patients with other tumors (R²Y(cum) = 0.748, Q²(cum) = 0.871). We also realize the typing of three RCC subtypes, including clear cell RCC, chromophobe RCC (R²Y(cum) = 0.620, Q²(cum) = 0.656), and the staging of RCC (R²Y(cum) = 0.755, Q²(cum) = 0.857). Moreover, the tumor sizes (threshold value is 3 cm) can be remarkably recognized by this advanced metabolic analysis tool (R²Y(cum) = 0.710, Q²(cum) = 0.787). Our work brings a bright prospect for designer matrix-based analytical tools in disease diagnosis, typing and staging.

The Complexity of Comparative Adsorption of C6 Hydrocarbons (Benzene, Cyclohexane, n-Hexane) at Metal-Organic Frameworks

The relatively stable MOFs Alfum, MIL-160, DUT-4, DUT-5, MIL-53-TDC, MIL-53, UiO-66, UiO-66-NH₂, UiO-66(F)₄, UiO-67, DUT-67, NH₂-MIL-125, MIL-125, MIL-101(Cr), ZIF-8, ZIF-11 and ZIF-7 were studied for their C₆ sorption properties. An understanding of the uptake of the larger C₆ molecules cannot simply be achieved with surface area and pore volume (from N₂ sorption) but involves the complex micropore structure of the MOF. The maximum adsorption capacity at p p₀^-1 = 0.9 was shown by DUT-4 for benzene, MIL-101(Cr) for cyclohexane and DUT-5 for n-hexane. In the low-pressure range from p p₀^-1 = 0.1 down to 0.05 the highest benzene uptake is given by DUT-5, DUT-67/UiO-67 and MIL-101(Cr), for cyclohexane and n-hexane by DUT-5, UiO-67 and MIL-101(Cr). The highest uptake capacity at p p₀^-1 = 0.02 was seen with MIL-53 for benzene, MIL-125 for cyclohexane and DUT-5 for n-hexane. DUT-5 and MIL-101(Cr) are the MOFs with the widest pore window openings/cross sections but the low-pressure uptake seems to be controlled by a complex combination of ligand and pore-size effect. IAST selectivities between the three binary mixtures show a finely tuned and difficult to predict interplay of pore window size with (critical) adsorptive size and possibly a role of electrostatics through functional groups such as NH₂.

Facile synthesis disposable MOF membrane filter: Growth of NH2-MIL-125 (Ti) on filter paper for fast removal of organophosphorus pesticides in aqueous solution and vegetables

Metal-organic frameworks (MOFs) have great potential to remove pesticide residues. However, the lack of affinity between the materials and target and the process of trivial sample preparation resulted in limited removal efficiency. Here, we report a one-pot method for the fast preparation of NH₂-MIL-125 (Ti)-based filter paper to synthesise NH₂-MIL-125 (Ti)-based filter paper membranes. The NH₂-MIL-125 (Ti)-based filter paper membrane takes advantage of π-π interactions between the organophosphorus pesticides (OPPs) and the benzene ring of MOFs. The affinity of amino groups and metal Ti for phosphorus atoms in the OPPs exhibits rapid removal efficiency for three OPPs, imidan, fenthion, and fenitrothion. The isothermal adsorption results for imidan, fenthion, and fenitrothion were consistent with the Langmuir, Freundlich, and Langmuir models, respectively. The kinetic results for imidan, fenthion, and fenitrothion agreed with the pseudo-second-order kinetic model, and the removal efficiency reached equilibrium within 1 min. There was no significant change in the adsorption capacity of OPPs in different pH solutions (pH = 2-10). Compared with that of MOFs, the NH₂-MIL-125 (Ti)-based filter paper membrane removal efficiency of OPPs is the same, and it also has better removal efficiency in actual spinach samples. As a result, the sample pretreatment procedure was simplified using a low-cost and simple-to-synthesize disposable NH₂-MIL-125 (Ti)-based filter paper membrane, samples' quick separation and the simultaneous fast removal of OPPs.

Morphology Genetic Metal-Organic Frameworks-Based Biocomposites for Efficient Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs), MIL-125 and UiO-66, were modified on the butterfly wings (BWs) by chemical bonds, and CdS was grown in situ on them through a solvothermal approach. The BWs enable the biocomposites to possess a wider (>600 nm) and stronger light absorption. The in situ growth method can produce highly active and stable biocomposites. These novel morphologic MOF/CdS biocomposites were characterized using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and so on. The resulting composites were tested for photocatalytic hydrogen production through water splitting with platinum and lactic acid as the co-catalyst and sacrificial agent, respectively. The two samples showed higher activity than bulk CdS, MOFs, or their composites. Therefore, this paper provides an appropriate method to obtain the MOF/CdS biocomposites, and the resulting biocomposites are proved to be efficient catalyst systems for hydrogen evolution from water under visible light with a wider wavelength.

Cr-Ti Mixed Oxide Molecular Cages: Synthesis, Structure, Photoresponse, and Photocatalytic Properties

The solvothermal reaction of titanium isopropoxide and chromate in the presence of benzoate produced two novel host-guest clusters encapsulating Cs⁺ or H₃O⁺, (H₃O)@Ti₇Cr₁₄ and Cs@Ti₇Cr₁₄. The most remarkable feature is that the Ti₇O₇ ring is concentrically embraced by a Cr₁₄O₁₄ ring to form a rigid Ti₇Cr₁₄ host. ESI-MS and ¹³³Cs NMR revealed that the overall framework structures are preserved, whereas the benzoate ligands on the two clusters may be labile in solutions. Both (H₃O)@Ti₇Cr₁₄ and Cs@Ti₇Cr₁₄ exhibit good UV-vis light-responsive properties and photocatalytic activities, with absorption edges extending up to 780 nm. Cs@Ti₇Cr₁₄ is an effective visible-light-responsive photocatalyst in both the heterogeneous methylene dye degradation and homogeneous CO₂ cycloaddition reaction under mild conditions like room temperature and 1 bar of CO₂. According to the mechanism studies, Cs⁺, as a rigid guest, can significantly improve the photogenerated charge separation efficiency of the Ti₇Cr₁₄ host, thereby improving its interface charge separation properties, photocurrent, and photocatalytic activities. Our findings not only provide new members of heterometallic titanium oxide clusters to enrich the metal oxide cluster family but also open up new possibilities for their photoresponses, which may play an important role in solar energy harvesting for sustainable chemistry.

De novo synthesis of a MIL-125(Ti) carrier for thermal- and pH-responsive drug release

Microporous round cake-like (diameter: 900 ± 100 nm) MIL-125(Ti) carrier with a central metal (Ti) exhibiting bio-affinity and possessing a great potential to be used as drug release platform, has been synthesized in the present study. The thermal and pH responsiveness of drug delivery systems (DDS) are the most important parameters for drug release and can be provided through polymer coating techniques. The Pluronic F127 (F127) and chitosan (CH) monomers were inserted into the crystal lattice of MIL-125(Ti) carrier during the de novo synthesis process, which were subsequently loaded with doxorubicin (DOX). The results reveal particle size changes (ranged between 30 and 50 %) from the original size of the MIL-125(Ti) carrier in response to temperature and pH when the carrier reaches acid environment. The drug release profiles have been completed through self-design device, which provides for the real-time release in the DOX amounts via UV-Vis spectra. The kinetics analysis was used to evaluate the R² values of first order, Higuchi, Korsmeyer-peppas, and Weibull fitting equations, where the Weibull fitting indicated the best R². An increase by 59.3 % of DOX released under the acid status (pH = 5.4) was observed, indicating that the CH-MIL-125(Ti) carrier is temperature and pH responsive. Moreover, the lattice explosion resulting from the temperature increase in the range of 25-42 °C caused an increase in F127-MIL-125(Ti) by 30.8-38.3 %. The simulated SAXS/WAXS studies for the microstructures of MIL-125(Ti) based DDS at different temperatures after polymer coating (F127-MIL-125(Ti)) provide the possible mechanism of lattice explosion. As such, the responsive Ti-MOF has a highly potential for use in the applications of cancer treatment.

Ti-based robust MOFs in the combined photocatalytic degradation of emerging organic contaminants

Photocatalysis process is a promising technology for environmental remediation. In the continuous search of new heterogeneous photocatalysts, metal–organic frameworks (MOFs) have recently emerged as a new type of photoactive materials for water remediation. Particularly, titanium-based MOFs (Ti-MOFs) are considered one of the most appealing subclass of MOFs due to their promising optoelectronic and photocatalytic properties, high chemical stability, and unique structural features. However, considering the limited information of the reported studies, it is a hard task to determine if real-world water treatment is attainable using Ti-MOF photocatalysts. In this paper, via a screening with several Ti-MOFs, we originally selected and described the potential of a Ti-MOF in the photodegradation of a mixture of relevant Emerging Organic Contaminants (EOCs) in real water. Initially, two challenging drugs (i.e., the β-blocker atenolol (At) and the veterinary antibiotic sulfamethazine (SMT)) and four water stable and photoactive Ti-MOF structures have been rationally selected. From this initial screening, the mesoporous Ti-trimesate MIL-100(Ti) was chosen as the most promising photocatalyst, with higher At or SMT individual photodegradation (100% of At and SMT photodegradation in 2 and 4 h, respectively). Importantly, the safety of the formed by-products from the At and SMT photodegradation was confirmed. Finally, the At and SMT photodegradation capacity of MIL-100(Ti) was confirmed under realistic conditions, by using a mixture of contaminants in tap drinking water (100% of At and SMT photodegradation in 4 h), proven in addition its potential recyclability, which reinforces the potential of MIL-100(Ti) in water remediation.

Metal-based nano-delivery platform for treating bone disease and regeneration

Owing to their excellent characteristics, such as large specific surface area, favorable biosafety, and versatile application, nanomaterials have attracted significant attention in biomedical applications. Among them, metal-based nanomaterials containing various metal elements exhibit significant bone tissue regeneration potential, unique antibacterial properties, and advanced drug delivery functions, thus becoming crucial development platforms for bone tissue engineering and drug therapy for orthopedic diseases. Herein, metal-based drug-loaded nanomaterial platforms are classified and introduced, and the achievable drug-loading methods are comprehensively generalized. Furthermore, their applications in bone tissue engineering, osteoarthritis, orthopedic implant infection, bone tumor, and joint lubrication are reviewed in detail. Finally, the merits and demerits of the current metal-based drug-loaded nanomaterial platforms are critically discussed, and the challenges faced to realize their future applications are summarized.

Titanium-based metal-organic framework MIL-125(Ti) for the highly selective isolation and purification of immunoglobulin G from human serum

Titanium-based metal-organic framework MIL-125(Ti) was synthesized by the hydrothermal method of terephthalic acid and tetra butyl titanate in N-N dimethylformamide and methanol. MIL-125(Ti) was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, nitrogen adsorption-desorption, energy-dispersive X-ray spectroscopy, zeta potential, scanning electron microscope and transmission electron microscopy. The results showed MIL-125(Ti) could be used as a potential adsorbent for protein separation and purification due to the high specific surface area, high stability and strong hydrophobicity. As a result, MIL-125(Ti) had adsorption selectivity for immunoglobulin G, which was due to hydrogen bond between MIL-125(Ti) and protein. At pH 8.0, the maximum adsorption efficiency of 0.25 mg MIL-125(Ti) for 300 μL 100 μg mL^-1 immunoglobulin G was 98.3%, and its maximum adsorption capacity was 232.56 mg g^-1 . The elution efficiency of immunoglobulin G was 92.4% by 0.1% SDS. SDS-PAGE result demonstrated the successful isolation of highly purified immunoglobulin G from the human serum. Therefore, a new method of separation and purification of immunoglobulin G in human serum using titanium-based metal-organic framework MIL-125(Ti) as a solid-phase adsorbent was established, which broadened the application scope of metal-organic frameworks. This article is protected by copyright. All rights reserved.

Bioinspired Metalation of the Metal-Organic Framework MIL-125-NH2 for Photocatalytic NADH Regeneration and Gas-Liquid-Solid Three-Phase Enzymatic CO2 Reduction

Coenzyme NADH regeneration is crucial for sustained photoenzymatic catalysis of CO₂ reduction. However, light-driven NADH regeneration still suffers from the low regeneration efficiency and requires the use of a homogeneous Rh complex. Herein, a Rh complex-based electron transfer unit was chemically attached onto the linker of the MIL-125-NH₂ . The coupling between the light-harvesting iminopyridine unit and electron-transferring Rh-complex facilitated the photo-induced electron transfer for the NADH regeneration with the yield of 66.4 % in 60 mins for 5 cycles. The formate dehydrogenase was further deposited onto the hydrophobic layer of the membrane by a reverse filtering technique, which forms the gas-liquid-solid reaction interface around the enzyme site. It gave an enhanced formic acid yield of 9.5 mM in 24 hours coupled with the in situ regenerated NADH. The work could shed light on the construction of integrated inorganic-enzyme hybrid systems for artificial photosynthesis.