Origin of Selective Production of Hydrogen Peroxide by Electrochemical Oxygen Reduction

Accelerated removal of sulfadiazine by heterogeneous electro-Fenton system with Pt-FeOX/graphene single-atom alloy cathodes

Heterogeneous electro-Fenton (EF) process is emerging as an attractive treatment technology for removal of sulfadiazine (SDZ), in which in situ generation of H2O2 and Fe(II) are crucial steps. In this study, Pt-FeOX/G was synthesized as a heterogeneous EF catalyst by incorporating Pt single atoms into a FeOX nanocrystal. The optimized Pt1-FeOX/G cathode exhibited an SDZ conversion of >90% within 30 min over a broad pH range (3-11). The Pt1-FeOX/G cathode under a strong alkaline medium exhibited very prominent selectivity to H2O2 via 2e- oxygen reduction reaction with a maximum H2O2 concentration of 211.93 mg L-1. The hydroxyl radicals in the cathodic chamber were mainly derived from the in situ conversion of generated H2O2 in the heterogeneous EF system. The structure-activity results of Pt-FeOX/G suggested that the SDZ removal efficiency was closely related to the decentralized morphology and electronic configuration of the Pt-FeOX microcrystalline structure. Three possible SDZ degradation pathways, dominated by S-N bond cleavage, were proposed based on the stage products. The toxicity of the major products was determined using the ecological structure-activity relationship model in conjunction with trophic aquatic organisms. This study demonstrated the feasibility of enhancing heterogeneous EF catalysis for antibiotic-polluted water using multifunctional single-atom alloy cathodes.

Electrochemical production of hydrogen peroxide by non-noble metal-doped g-C3N4 under a neutral electrolyte

Electrochemical oxygen reduction (ORR) for the production of clean hydrogen peroxide (H2O2) is an effective alternative to industrial anthraquinone methods. The development of highly active, stable, and 2e- ORR oxygen reduction electrocatalysts while suppressing the competing 4e- ORR pathway is currently the main challenge. Herein, bimetallic doping was successfully achieved based on graphitic carbon nitride (g-C3N4) with the simultaneous introduction of K and Co, whereby 2D porous K-Co/CNNs nanosheets were obtained. The introduction of Co promoted the selectivity for H2O2, while the introduction of K not only promoted the formation of 2D nanosheets of g-C3N4, but also inhibited the ablation of H2O2 by K-Co/CNNs. Electrochemical studies showed that the selectivity of H2O2 in K-Co/CNNs under neutral electrolyte was as high as 97%. After 24 h, the H2O2 accumulation of K-Co/CNNs was as high as 31.7 g L-1. K-Co/CNNs improved the stability of H2O2 by inhibiting the ablation of H2O2, making it a good 2e- ORR catalyst and providing a new research idea for the subsequent preparation of H2O2.

What Is the Rate-Limiting Step of Oxygen Reduction Reaction on Fe-N-C Catalysts?

Oxygen reduction reaction (ORR) is essential to various renewable energy technologies. An important catalyst for ORR is single iron atoms embedded in nitrogen-doped graphene (Fe-N-C). However, the rate-limiting step of the ORR on Fe-N-C is unknown, significantly impeding understanding and improvement. Here, we report the activation energies of all of the steps, calculated by ab initio molecular dynamics simulations under constant electrode potential. In contrast to the common belief that a hydrogenation step limits the reaction rate, we find that the rate-limiting step is oxygen molecule replacing adsorbed water on Fe. This occurs through concerted motion of H2O desorption and O2 adsorption, without leaving the site bare. Interestingly, despite being an apparent "thermal" process that is often considered to be potential-independent, the barrier reduces with the electrode potential. This can be explained by stronger Fe-O2 binding and weaker Fe-H2O binding at a lower potential, due to O2 gaining electrons and H2O donating electrons to the catalyst. Our study offers new insights into the ORR on Fe-N-C and highlights the importance of kinetic studies in heterogeneous electrochemistry.

The concerted proton-electron transfer mechanism of proton migration in the electrochemical interface

The proton migration in the electrochemical interface is a fundamental electrochemical processes in proton involved reactions. We find fractional electron transfer, which is inversely proportional to the distance between the proton and electrode, during the proton migration under constant potential. The electrical energy carried by the transferred charge facilitates the proton to overcome the chemical barrier in the migration pathway, which is accounting for more than half electrical energy in the proton involved reactions. Consequently, less charge transfer and energy exchange take place in the reduction process. Therefore, the proton migration in the electrochemical interface is an essential component of the electrochemical reaction in terms of electron transfer and energy conversation, and are worthy of more attention in the rational design and optimization of electrochemical systems.

Realistic Modeling of the Electrocatalytic Process at Complex Solid-Liquid Interface

The rational design of electrocatalysis has emerged as one of the most thriving means for mitigating energy and environmental crises. The key to this effort is the understanding of the complex electrochemical interface, wherein the electrode potential as well as various internal factors such as H-bond network, adsorbate coverage, and dynamic behavior of the interface collectively contribute to the electrocatalytic activity and selectivity. In this context, the authors have reviewed recent theoretical advances, and especially, the contributions to modeling the realistic electrocatalytic processes at complex electrochemical interfaces,  and illustrated the challenges and fundamental problems in this field. Specifically, the significance of the inclusion of explicit solvation and electrode potential as well as the strategies toward the design of highly efficient electrocatalysts are discussed. The structure-activity relationships and their dynamic responses to the environment and catalytic functionality under working conditions are illustrated to be crucial factors for understanding the complexed interface and the electrocatalytic activities. It is hoped that this review can help spark new research passion and ultimately bring a step closer to a realistic and systematic modeling method for electrocatalysis.

Revealing the role of double-layer microenvironments in pH-dependent oxygen reduction activity over metal-nitrogen-carbon catalysts

A standing puzzle in electrochemistry is that why the metal-nitrogen-carbon catalysts generally exhibit dramatic activity drop for oxygen reduction when traversing from alkaline to acid. Here, taking FeCo-N6-C double-atom catalyst as a model system and combining the ab initio molecular dynamics simulation and in situ surface-enhanced infrared absorption spectroscopy, we show that it is the significantly distinct interfacial double-layer structures, rather than the energetics of multiple reaction steps, that cause the pH-dependent oxygen reduction activity on metal-nitrogen-carbon catalysts. Specifically, the greatly disparate charge densities on electrode surfaces render different orientations of interfacial water under alkaline and acid oxygen reduction conditions, thereby affecting the formation of hydrogen bonds between the surface oxygenated intermediates and the interfacial water molecules, eventually controlling the kinetics of the proton-coupled electron transfer steps. The present findings may open new and feasible avenues for the design of advanced metal-nitrogen-carbon catalysts for proton exchange membrane fuel cells.

Does Coherence Affect the Multielectron Oxygen Reduction Reaction?

The oxygen reduction reaction (ORR) is the key for oxygen-based respiration and the operation of fuel cells. It involves the transmission of two pairs of electrons. We probed what type of interaction between the electrons is required to enable their efficient transfer into the oxygen. We show experimentally that the transfer of the electrons is controlled by the "hidden property" and present a theoretical model suggesting that it is related to coherent phase relations between the two electrons. Using spin polarization electrochemical measurements, with electrodes coated with different thicknesses of chiral coating, we confirm the special relation between the electrons. This relation is destroyed by multiple scattering events that result in the formation of hydrogen peroxide, which indicates a reduction in the ORR efficiency. Another indication for the possible role of coherence is the fluctuations in the reaction efficiency as a function of thickness of the chiral coated electrode.

Proton Shuttling by Polyaniline of High Brønsted Basicity for Improved Electrocatalytic Ethylene Production from CO2

Hybrid organic/inorganic composites with the organic phase tailored to modulate local chemical environment at the Cu surface arise as an enchanting category of catalysts for electrocatalytic CO2 reduction reaction (CO2 RR). A fundamental understanding on how the organics of different functionality, polarity, and hydrophobicity affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polypyrrole (PPy) and polyaniline (PANI) manifesting different Brønsted basicity are compared for their regulatory roles on the CO2 RR pathways regarding *CO coverage, proton source and interfacial polarity. Concerted efforts from in situ IR, Raman and operando modelling unveil that at the PPy/Cu interface with limited *CO coverage, hydridic *H produced by the Volmer step favors the carbon hydrogenation of *CO to form *CHO through a Tafel process; Whereas at the PANI/Cu interface with concentrated CO2 and high *CO coverage, protonic H+ shuttled through the benzenoid -NH- protonates the oxygen of *CO, yielding *COH for asymmetric coupling with nearby *CO to form *OCCOH under favored energetics. As a result of the tailored chemical environment, the restructured PANI/Cu composite demonstrates a high partial current density of 0.41 A cm-2 at a maximal Faraday efficiency of 67.5 % for ethylene production, ranking among states of the art.

Constrained Hybrid Monte Carlo Sampling Made Simple for Chemical Reaction Simulations

Most electrochemical reactions should be studied under a grand canonical ensemble condition with a constant potential and/or a constant pH value. Free energy profiles provide key insights into understanding the reaction mechanisms. However, many molecular dynamics (MD)-based theoretical studies for electrochemical reactions did not employ an exact grand canonical ensemble sampling scheme for the free energy calculations, partially due to the issues of discontinuous trajectories induced by the particle-number variations during MD simulations. An alternative statistical sampling approach, the Monte Carlo (MC) method, is naturally appropriate for the open-system simulations if we focus on the thermodynamic properties. An advanced MC scheme, the hybrid Monte Carlo (HMC) method, which can efficiently sample the configurations of a system with large degrees of freedom, however, has limitations in the constrained-sampling applications. In this work, we propose an adjusted constrained HMC method to compute free energy profiles using the thermodynamic integration (TI) method. The key idea of the method for handling the constraint in TI is to integrate the reaction coordinate and sample the rest degrees of freedom by two types of MC schemes, the HMC scheme and the Metropolis algorithm with unbiased trials (M(RT)2-UB). We test the proposed method on three different systems involving two kinds of reaction coordinates, which are the distance between two particles and the difference of particles' distances, and compare the results to those generated by the constrained M(RT)2-UB method serving as benchmarks. We show that our proposed method has the advantages of high sampling efficiency and convenience of implementation, and the accuracy is justified as well. In addition, we show in the third test system that the proposed constrained HMC method can be combined with the path integral method to consider the nuclear quantum effects, indicating a broader application scenario of the sampling method reported in this work.

Electric Double Layer Effects in Electrocatalysis: Insights from Ab Initio Simulation and Hierarchical Continuum Modeling

Structures of the electric double layer (EDL) at electrocatalytic interfaces, which are modulated by the material properties, the electrolyte characteristics (e.g., the pH, the types and concentrations of ions), and the electrode potential, play crucial roles in the reaction kinetics. Understanding the EDL effects in electrocatalysis has attracted substantial research interest in recent years. However, the intrinsic relationships between the specific EDL structures and electrocatalytic kinetics remain poorly understood, especially on the atomic scale. In this Perspective, we briefly review the recent advances in deciphering the EDL effects mainly in hydrogen and oxygen electrocatalysis through a multiscale approach, spanning from the atomistic scale simulated by ab initio methods to the macroscale by a hierarchical approach. We highlight the importance of resolving the local reaction environment, especially the local hydrogen bond network, in understanding EDL effects. Finally, some of the remaining challenges are outlined, and an outlook for future developments in these exciting frontiers is provided.

DFT-assisted low-dimensional carbon-based electrocatalysts design and mechanism study: a review

Low-dimensional carbon-based (LDC) materials have attracted extensive research attention in electrocatalysis because of their unique advantages such as structural diversity, low cost, and chemical tolerance. They have been widely used in a broad range of electrochemical reactions to relieve environmental pollution and energy crisis. Typical examples include hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Traditional "trial and error" strategies greatly slowed down the rational design of electrocatalysts for these important applications. Recent studies show that the combination of density functional theory (DFT) calculations and experimental research is capable of accurately predicting the structures of electrocatalysts, thus revealing the catalytic mechanisms. Herein, current well-recognized collaboration methods of theory and practice are reviewed. The commonly used calculation methods and the basic functionals are briefly summarized. Special attention is paid to descriptors that are widely accepted as a bridge linking the structure and activity and the breakthroughs for high-volume accurate prediction of electrocatalysts. Importantly, correlated multiple descriptors are used to systematically describe the complicated interfacial electrocatalytic processes of LDC catalysts. Furthermore, machine learning and high-throughput simulations are crucial in assisting the discovery of new multiple descriptors and reaction mechanisms. This review will guide the further development of LDC electrocatalysts for extended applications from the aspect of DFT computations.

Highly efficient and continuous activation of O2 by a novel FexP-FeCu composite for water purification and insights into the activation mechanisms through DFT calculation

Degradation of organic pollutants through O2 activation catalyzed by transitional metals is challenging without addition of external chemicals and input of energy. We prepare a novel Fe based catalyst by compositing carbon, iron phosphide (FexP), iron carbide (FexC), Fe0 and Cu NPs, which can continuously activate O2 to produce high amount of 1O2,·O2- and·OH radicals in a wide pH range. DFT calculation discloses that O2 molecules are dissociated into *O or exist as O-O in various configurations. The Fe-O2, Cu-O2 and FeP-O2 surfaces can react with H2O molecules to generate *OOH, *OH and/or OH-. The sorbed-O2 intermediates on FexC surface might be released as 1O2 or·O2-. The oxidative O2-sorbed surfaces and in-situ produced oxygen reactive species contribute to the efficient and pH-indenpendent degradation of organic pollutants. Cu NPs accelerate Fe2+/Fe3+ cycles and offer impetus to initiate O2 activation due to the potential difference between Fe and Cu. The recycling test and XPS results confirm that the mutual electron transferring among carbon, FexC, FexP, Fe and Cu maintains reactivity and stability of the catalysts.

-SR removal or -R removal? A mechanistic revisit on the puzzle of ligand etching of Au25(SR)18 nanoclusters during electrocatalysis

Accurate identification of active sites is highly desirable for elucidation of the reaction mechanism and development of efficient catalysts. Despite the promising catalytic performance of thiolated metal nanoclusters (NCs), their actual catalytic sites remain elusive. Traditional first-principles calculations and experimental observations suggested dealkylated S and dethiolated metal, respectively, to be the active centers. However, the real kinetic origin of thiolate etching during the electrocatalysis of NCs is still puzzling. Herein, we conducted advanced first-principles calculations and electrochemical/spectroscopic experiments to unravel the electrochemical etching kinetics of thiolate ligands in prototype Au25(SCH3)18 NC. The electrochemical processes are revealed to be spontaneously facilitated by dethiolation (i.e., desorption of -SCH3), forming the free HSCH3 molecule after explicitly including the solvent effect and electrode potential. Thus, exposed under-coordinated Au atoms, rather than the S atoms, serve as the real catalytic sites. The thermodynamically preferred Au-S bond cleavage arises from the selective attack of H from proton/H2O on the S atom under suitable electrochemical bias due to the spatial accessibility and the presence of S lone pair electrons. Decrease of reduction potential promotes the proton attack on S and significantly accelerates the kinetics of Au-S bond breakage irrespective of the pH of the medium. Our theoretical results are further verified by the experimental electrochemical and spectroscopic data. At more negative electrode potentials, the number of -SR ligands decreased with concomitant increase of the vibrational intensity of S-H bonds. These findings together clarify the atomic-level activation mechanism on the surface of Au25(SR)18 NCs.

Mimicking Metalloenzyme Microenvironments in the Transition Metal-Single Atom Catalysts for Electrochemical Hydrogen Peroxide Synthesis in an Acidic Medium

Electrochemical reduction of oxygen into hydrogen peroxide in an acidic medium offers an energy-efficient and green H2 O2 synthesis as an alternative to the energy-intensive anthraquinone process. Unfortunately, high overpotential, low production rates, and fierce competition from traditional four-electron reduction limit it. In this study, a metalloenzyme-like active structure is mimicked in carbon-based single-atom electrocatalysts for oxygen reduction to H2 O2 . Using a carbonization strategy, the primary electronic structure of the metal center with nitrogen and oxygen coordination is modulated, followed by epoxy oxygen functionalities close to the metal active sites. In an acidic medium, CoNOC active structures proceed with greater than 98% H2 O2 selectivity (2e- /2H+ ) rather than CoNC active sites that are selective to H2 O (4e- /4H+ ). Among all MNOC (M = Fe, Co, Mn, and Ni) single-atom electrocatalysts, the CoNOC is the most selective (> 98%) for H2 O2 production, with a mass activity of 10 A g-1 at 0.60 V vs. RHE. X-ray absorption spectroscopy is used to identify the formation of unsymmetrical MNOC active structures. Experimental results are also compared to density functional theory calculations, which revealed that the structure-activity relationship of the epoxy-surrounded CoNOC active structure reaches optimum (ΔG*OOH ) binding energies for high selectivity.

Electrosynthesis of Hydrogen Peroxide through Selective Oxygen Reduction: A Carbon Innovation from Active Site Engineering to Device Design

Electrochemical synthesis of hydrogen peroxide (H2 O2 ) through the selective oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone method, while its success relies largely on the development of efficient electrocatalyst. Currently, carbon-based materials (CMs) are the most widely studied electrocatalysts for electrosynthesis of H2 O2 via ORR due to their low cost, earth abundance, and tunable catalytic properties. To achieve a high 2e- ORR selectivity, great progress is made in promoting the performance of carbon-based electrocatalysts and unveiling their underlying catalytic mechanisms. Here, a comprehensive review in the field is presented by summarizing the recent advances in CMs for H2 O2 production, focusing on the design, fabrication, and mechanism investigations over the catalytic active moieties, where an enhancement effect of defect engineering or heteroatom doping on H2 O2 selectivity is discussed thoroughly. Particularly, the influence of functional groups on CMs for a 2e- -pathway is highlighted. Further, for commercial perspectives, the significance of reactor design for decentralized H2 O2 production is emphasized, bridging the gap between intrinsic catalytic properties and apparent productivity in electrochemical devices. Finally, major challenges and opportunities for the practical electrosynthesis of H2 O2 and future research directions are proposed.

Concurrent oxygen reduction and water oxidation at high ionic strength for scalable electrosynthesis of hydrogen peroxide

Electrosynthesis of hydrogen peroxide via selective two-electron transfer oxygen reduction or water oxidation reactions offers a cleaner, cost-effective alternative to anthraquinone processes. However, it remains a challenge to achieve high Faradaic efficiencies at elevated current densities. Herein, we report that oxygen-deficient Pr1.0Sr1.0Fe0.75Zn0.25O4-δ perovskite oxides rich of oxygen vacancies can favorably bind the reaction intermediates to facilitate selective and efficient two-electron transfer pathways. These oxides exhibited superior Faradic efficiencies (~99%) for oxygen reduction over a wide potential range (0.05 to 0.45 V versus reversible hydrogen electrode) and current densities surpassing 50 mA cm-2 under high ionic strengths. We further found that the oxides perform a high selectivity (~80%) for two-electron transfer water oxidation reaction at a low overpotential (0.39 V). Lastly, we devised a membrane-free electrolyser employing bifunctional electrocatalysts, achieving a record-high Faradaic efficiency of 163.0% at 2.10 V and 50 mA cm-2. This marks the first report of the concurrent oxygen reduction and water oxidation catalysed by efficient bifunctional oxides in a novel membrane-free electrolyser for scalable hydrogen peroxide electrosynthesis.

Synergetic Oxidation of the Hydroxyl Radical and Superoxide Anion Lowers the Benzoquinone Intermediate Conversion Barrier and Potentiates Effective Aromatic Pollutant Mineralization

Regulation of the free radical types is crucial but challenging in the ubiquitous heterogeneous catalytic oxidation for chemosynthesis, biotherapy, and environmental remediation. Here, using aromatic pollutant (AP) removal as a prototype, we identify the massive accumulation of the benzoquinone (BQ) intermediate in the hydroxyl radical (•OH)-mediated AP degradation process. Theoretical prediction and experiments demonstrate that BQ is both a Lewis acid and base because of its unique molecular and electronic structure caused by the existence of symmetrical carbonyl groups; therefore, it is hard to be electrophilically added by oxidizing •OH as a result of the high reaction energy barrier (ΔG = 1.74 eV). Fortunately, the introduction of the superoxide anion (•O2-) significantly lowers the conversion barrier (ΔG = 0.91 eV) of BQ because •O2- can act as the electron donor and acceptor simultaneously, electrophilically and nucleophilically add to BQ synchronously, and break it down. Subsequently, the breakdown products can then be further oxidized by •OH until completely mineralized. Such synergistic oxidation based on •OH and •O2- timely eliminates BQ, potentiates AP mineralization, and inhibits electrode fouling caused by high-resistance polymeric BQ; more importantly, it effectively reduces toxicity, saves energy and costs, and decreases the environmental footprint, evidenced by the life cycle assessment.

Electrosynthesis of ethylene glycol from C1 feedstocks in a flow electrolyzer

Ethylene glycol is a widely utilized commodity chemical, the production of which accounts for over 46 million tons of CO₂ emission annually. Here we report a paired electrocatalytic approach for ethylene glycol production from methanol. Carbon catalysts are effective in reducing formaldehyde into ethylene glycol with a 92% Faradaic efficiency, whereas Pt catalysts at the anode enable formaldehyde production through methanol partial oxidation with a 75% Faradaic efficiency. With a membrane-electrode assembly configuration, we show the feasibility of ethylene glycol electrosynthesis from methanol in a single electrolyzer. The electrolyzer operates a full cell voltage of 3.2 V at a current density of 100 mA cm^-2, with a 60% reduction in energy consumption. Further investigations, using operando flow electrolyzer mass spectroscopy, isotopic labeling, and density functional theory (DFT) calculations, indicate that the desorption of a *CH₂OH intermediate is the crucial step in determining the selectively towards ethylene glycol over methanol.

Facilitating two-electron oxygen reduction with pyrrolic nitrogen sites for electrochemical hydrogen peroxide production

Electrocatalytic hydrogen peroxide (H₂O₂) production via the two-electron oxygen reduction reaction is a promising alternative to the energy-intensive and high-pollution anthraquinone oxidation process. However, developing advanced electrocatalysts with high H₂O₂ yield, selectivity, and durability is still challenging, because of the limited quantity and easy passivation of active sites on typical metal-containing catalysts, especially for the state-of-the-art single-atom ones. To address this, we report a graphene/mesoporous carbon composite for high-rate and high-efficiency 2e^- oxygen reduction catalysis. The coordination of pyrrolic-N sites -modulates the adsorption configuration of the *OOH species to provide a kinetically favorable pathway for H₂O₂ production. Consequently, the H₂O₂ yield approaches 30 mol g^-1 h^-1 with a Faradaic efficiency of 80% and excellent durability, yielding a high H₂O₂ concentration of 7.2 g L^-1. This strategy of manipulating the adsorption configuration of reactants with multiple non-metal active sites provides a strategy to design efficient and durable metal-free electrocatalyst for 2e^- oxygen reduction.

Grand Canonical Ensemble Modeling of Electrochemical Interfaces Made Simple

Grand canonical ensemble (GCE) modeling of electrochemical interfaces, in which the electrochemical potential is converged to a preset constant, is essential for understanding electrochemistry and electrocatalysis at the electrodes. However, it requires developing efficient and robust algorithms to perform practical and effective GCE modeling with density functional theory (DFT) calculations. Herein, we developed an efficient and robust fully converged constant-potential (FCP) algorithm based on Newton's method and a polynomial fitting to calculate the necessary derivative for DFT calculations. We demonstrated with the constant-potential geometry optimization and Born-Oppenheimer molecular dynamics (BOMD) calculations that our FCP algorithm is resistant to the numerical instability that plagues other algorithms, and it delivers efficient convergence to the preset electrochemical potential and renders accurate forces for updating the nuclear positions of an electronically open system, outperforming other algorithms. The implementation of our FCP algorithm enables flexibility in using various computational codes and versatility in performing advanced tasks including the constant-potential enhanced-sampling BOMD simulations that we showcased with the modeling of the electrochemical hydrogenation of CO, and it is thus expected to find a wide spectrum of applications in the modeling of chemistry at electrochemical interfaces.

Spectroscopic Identification of Active Sites of Oxygen-Doped Carbon for Selective Oxygen Reduction to Hydrogen Peroxide

The electrochemical synthesis of hydrogen peroxide (H2 O2 ) via a two-electron (2 e- ) oxygen reduction reaction (ORR) process provides a promising alternative to replace the energy-intensive anthraquinone process. Herein, we develop a facile template-protected strategy to synthesize a highly active quinone-rich porous carbon catalyst for H2 O2 electrochemical production. The optimized PCC900 material exhibits remarkable activity and selectivity, of which the onset potential reaches 0.83 V vs. reversible hydrogen electrode in 0.1 M KOH and the H2 O2 selectivity is over 95 % in a wide potential range. Comprehensive synchrotron-based near-edge X-ray absorption fine structure (NEXAFS) spectroscopy combined with electrocatalytic characterizations reveals the positive correlation between quinone content and 2 e- ORR performance. The effectiveness of chair-form quinone groups as the most efficient active sites is highlighted by the molecule-mimic strategy and theoretical analysis.

Strategies for Sustainable Production of Hydrogen Peroxide via Oxygen Reduction Reaction: From Catalyst Design to Device Setup

An environmentally benign, sustainable, and cost-effective supply of H2O2 as a rapidly expanding consumption raw material is highly desired for chemical industries, medical treatment, and household disinfection. The electrocatalytic production route via electrochemical oxygen reduction reaction (ORR) offers a sustainable avenue for the on-site production of H2O2 from O2 and H2O. The most crucial and innovative part of such technology lies in the availability of suitable electrocatalysts that promote two-electron (2e-) ORR. In recent years, tremendous progress has been achieved in designing efficient, robust, and cost-effective catalyst materials, including noble metals and their alloys, metal-free carbon-based materials, single-atom catalysts, and molecular catalysts. Meanwhile, innovative cell designs have significantly advanced electrochemical applications at the industrial level. This review summarizes fundamental basics and recent advances in H2O2 production via 2e--ORR, including catalyst design, mechanistic explorations, theoretical computations, experimental evaluations, and electrochemical cell designs. Perspectives on addressing remaining challenges are also presented with an emphasis on the large-scale synthesis of H2O2 via the electrochemical route.

Recent advances in the theoretical studies on the electrocatalytic CO2 reduction based on single and double atoms

Excess of carbon dioxide (CO2) in the atmosphere poses a significant threat to the global climate. Therefore, the electrocatalytic carbon dioxide reduction reaction (CO2RR) is important to reduce the burden on the environment and provide possibilities for developing new energy sources. However, highly active and selective catalysts are needed to effectively catalyze product synthesis with high adhesion value. Single-atom catalysts (SACs) and double-atom catalysts (DACs) have attracted much attention in the field of electrocatalysis due to their high activity, strong selectivity, and high atomic utilization. This review summarized the research progress of electrocatalytic CO2RR related to different types of SACs and DACs. The emphasis was laid on the catalytic reaction mechanism of SACs and DACs using the theoretical calculation method. Furthermore, the influences of solvation and electrode potential were studied to simulate the real electrochemical environment to bridge the gap between experiments and computations. Finally, the current challenges and future development prospects were summarized and prospected for CO2RR to lay the foundation for the theoretical research of SACs and DACs in other aspects.

Explaining the Decay of Nucleic Acid-Based Sensors under Continuous Voltammetric Interrogation

Nucleic acid-based electrochemical sensors (NBEs) can support continuous and highly selective molecular monitoring in biological fluids, both in vitro and in vivo, via affinity-based interactions. Such interactions afford a sensing versatility that is not supported by strategies that depend on target-specific reactivity. Thus, NBEs have significantly expanded the scope of molecules that can be monitored continuously in biological systems. However, the technology is limited by the lability of the thiol-based monolayers employed for sensor fabrication. Seeking to understand the main drivers of monolayer degradation, we studied four possible mechanisms of NBE decay: (i) passive desorption of monolayer elements in undisturbed sensors, (ii) voltage-induced desorption under continuous voltammetric interrogation, (iii) competitive displacement by thiolated molecules naturally present in biofluids like serum, and (iv) protein binding. Our results indicate that voltage-induced desorption of monolayer elements is the main mechanism by which NBEs decay in phosphate-buffered saline. This degradation can be overcome by using a voltage window contained between -0.2 and 0.2 V vs Ag|AgCl, reported for the first time in this work, where electrochemical oxygen reduction and surface gold oxidation cannot occur. This result underscores the need for chemically stable redox reporters with more positive reduction potentials than the benchmark methylene blue and the ability to cycle thousands of times between redox states to support continuous sensing for long periods. Additionally, in biofluids, the rate of sensor decay is further accelerated by the presence of thiolated small molecules like cysteine and glutathione, which can competitively displace monolayer elements even in the absence of voltage-induced damage. We hope that this work will serve as a framework to inspire future development of novel sensor interfaces aiming to eliminate the mechanisms of signal decay in NBEs.

Co-based Catalysts for Selective H2 O2 Electroproduction via 2-electron Oxygen Reduction Reaction

Electrochemical production of hydrogen peroxide (H₂ O₂ ) via two-electron oxygen reduction reaction (ORR) process is emerging as a promising alternative method to the conventional anthraquinone process. To realize high-efficiency H₂ O₂ electrosynthesis, robust and low cost electrocatalysts have been intensively pursued, among which Co-based catalysts attract particular research interests due to the earth-abundance and high selectivity. Here, we provide a comprehensive review on the advancement of Co-based electrocatalyst for H₂ O₂ electroproduction. The fundamental chemistry of 2-electron ORR is discussed firstly for guiding the rational design of electrocatalysts. Subsequently, the development of Co-based electrocatalysts involving nanoparticles, compounds and single atom catalysts is summarized with the focus on active site identification, structure regulation and mechanism understanding. Moreover, the current challenges and future directions of the Co-based electrocatalysts are briefly summarized in this review.

Designing Solid Electrolyte Interfaces towards Homogeneous Na Deposition: Theoretical Guidelines for Electrolyte Additives and Superior High-Rate Cycling Stability

Metallic Na is a promising metal anode for large-scale energy storage. Nevertheless, unstable solid electrolyte interphase (SEI) and uncontrollable Na dendrite growth lead to disastrous short circuit and poor cycle life. Through phase field and ab initio molecular dynamics simulation, we first predict that the sodium bromide (NaBr) with the lowest Na ion diffusion energy barrier among sodium halogen compounds (NaX, X=F, Cl, Br, I) is the ideal SEI composition to induce the spherical Na deposition for suppressing dendrite growth. Then, 1,2-dibromobenzene (1,2-DBB) additive is introduced into the common fluoroethylene carbonate-based carbonate electrolyte (the corresponding SEI has high mechanical stability) to construct a desirable NaBr-rich stable SEI layer. When the Na||Na₃ V₂ (PO₄ )₃ cell utilizes the electrolyte with 1,2-DBB additive, an extraordinary capacity retention of 94 % is achieved after 2000 cycles at a high rate of 10 C. This study provides a design philosophy for dendrite-free Na metal anode and can be expanded to other metal anodes.

Enhanced Selectivity in the Electroproduction of H2 O2 via F/S Dual-Doping in Metal-Free Nanofibers

Electrocatalytic two-electron oxygen reduction (2e^- ORR) to hydrogen peroxide (H₂ O₂ ) is attracting broad interest in diversified areas including paper manufacturing, wastewater treatment, production of liquid fuels, and public sanitation. Current efforts focus on researching low-cost, large-scale, and sustainable electrocatalysts with high activity and selectivity. Here a large-scale H₂ O₂ electrocatalysts based on metal-free carbon fibers with a fluorine and sulfur dual-doping strategy is engineered. Optimized samples yield with a high onset potential of 0.814 V versus reversible hydrogen electrode (RHE), an almost ideal 2e^- pathway selectivity of 99.1%, outperforming most of the recently reported carbon-based or metal-based electrocatalysts. First principle theoretical computations and experiments demonstrate that the intermolecular charge transfer coupled with electron spin redistribution from fluorine and sulfur dual-doping is the crucial factor contributing to the enhanced performances in 2e^- ORR. This work opens the door to the design and implementation of scalable, earth-abundant, highly selective electrocatalysts for H₂ O₂ production and other catalytic fields of industrial interest.

Metal single-site catalyst design for electrocatalytic production of hydrogen peroxide at industrial-relevant currents

Direct hydrogen peroxide (H₂O₂) electrosynthesis via the two-electron oxygen reduction reaction is a sustainable alternative to the traditional energy-intensive anthraquinone technology. However, high-performance and scalable electrocatalysts with industrial-relevant production rates remain to be challenging, partially due to insufficient atomic level understanding in catalyst design. Here we utilize theoretical approaches to identify transition-metal single-site catalysts for two-electron oxygen reduction using the *OOH binding energy as a descriptor. The theoretical predictions are then used as guidance to synthesize the desired cobalt single-site catalyst with a O-modified Co-(pyrrolic N)₄ configuration that can achieve industrial-relevant current densities up to 300 mA cm^-2 with 96-100% Faradaic efficiencies for H₂O₂ production at a record rate of 11,527 mmol h^-1 g_cat^-1. Here, we show the feasibility and versatility of metal single-site catalyst design using various commercial carbon and cobalt phthalocyanine as starting materials and the high applicability for H₂O₂ electrosynthesis in acidic, neutral and alkaline electrolytes.

Defective hBN-Supported Fe2N Single Cluster Catalyst for Active and Selective Electro-Reduction of Multiple CO to Propane: Theoretical Elucidation of Metal-Nonmetal Synergic Effects

The present work introduces the multiple CO reduction toward C₃ products promoted by a newly designed single cluster catalyst consisting of defective hBN and embedded dimerized Fe, by means of density functional theory calculations. We find the strong metal-support interactions give rise to the local strain and electron accumulation of the N coordinated with two metals and resultantly form a Fe₂N active center. The metal-nonmetal synergic effect facilitates the coadsorption and C-C coupling of triple CO molecules and finally generates propane in a highly active and selective way.

Synthesis of Silver Nanoparticles-Modified Graphitic Carbon Nitride Nanosheets for Highly Efficient Photocatalytic Hydrogen Peroxide Evolution

As a promising metal-free photocatalyst, graphitic carbon nitride (g-C3N4) is still limited by insufficient visible light absorption and rapid recombination of photogenerated carriers, resulting in low photocatalytic activity. Here, we adjusted the microstructure of the pristine bulk-g-C3N4 (PCN) and further loaded silver (Ag) nanoparticles. Abundant Ag nanoparticles were grown on the thin-layer g-C3N4 nanosheets (CNNS), and the Ag nanoparticles decorated g-C3N4 nanosheets (Ag@CNNS) were successfully synthesized. The thin-layer nanosheet-like structure was not only beneficial for the loading of Ag nanoparticles but also for the adsorption and activation of reactants via exposing more active sites. Moreover, the surface plasmon resonance (SPR) effect induced by Ag nanoparticles enhanced the absorption of visible light by narrowing the band gap of the substrate. Meanwhile, the composite band structure effectively promoted the separation and transfer of carriers. Benefiting from these merits, the Ag@CNNS reached a superior hydrogen peroxide (H2O2) yield of 120.53 μmol/g/h under visible light irradiation in pure water (about 8.0 times higher than that of PCN), significantly surpassing most previous reports. The design method of manipulating the microstructure of the catalyst combined with the modification of metal nanoparticles provides a new idea for the rational development and application of efficient photocatalysts.

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe-N-C Materials

The systematic improvement of Fe-N-C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe-N-C materials is the formation of the Fe^III-OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of Fe^III-OH to Fe^II and desorbed H₂O requires an axial H₂O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. These findings highlight the importance of solvent-substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

Tuning Two-Electron Oxygen-Reduction Pathways for H2 O2 Electrosynthesis via Engineering Atomically Dispersed Single Metal Site Catalysts

The hydrogen peroxide (H₂ O₂ ) generation via the electrochemical oxygen reduction reaction (ORR) under ambient conditions is emerging as an alternative and green strategy to the traditional energy-intensive anthraquinone process and unsafe direct synthesis using H₂ and O₂ . It enables on-site and decentralized H₂ O₂ production using air and renewable electricity for various applications. Currently, atomically dispersed single metal site catalysts have emerged as the most promising platinum group metal (PGM)-free electrocatalysts for the ORR. Further tuning their central metal sites, coordination environments, and local structures can be highly active and selective for H₂ O₂ production via the 2e^- ORR. Herein, recent methodologies and achievements on developing single metal site catalysts for selective O₂ to H₂ O₂ reduction are summarized. Combined with theoretical computation and advanced characterization, a structure-property correlation to guide rational catalyst design with a favorable 2e^- ORR process is aimed to provide. Due to the oxidative nature of H₂ O₂ and the derived free radicals, catalyst stability and effective solutions to improve catalyst tolerance to H₂ O₂ are emphasized. Transferring intrinsic catalyst properties to electrode performance for viable applications always remains a grand challenge. The key performance metrics and knowledge during the electrolyzer development are, therefore, highlighted.

Electrochemical oxygen reduction to hydrogen peroxide at practical rates in strong acidic media

Electrochemical oxygen reduction to hydrogen peroxide (H2O2) in acidic media, especially in proton exchange membrane (PEM) electrode assembly reactors, suffers from low selectivity and the lack of low-cost catalysts. Here we present a cation-regulated interfacial engineering approach to promote the H2O2 selectivity (over 80%) under industrial-relevant generation rates (over 400 mA cm-2) in strong acidic media using just carbon black catalyst and a small number of alkali metal cations, representing a 25-fold improvement compared to that without cation additives. Our density functional theory simulation suggests a "shielding effect" of alkali metal cations which squeeze away the catalyst/electrolyte interfacial protons and thus prevent further reduction of generated H2O2 to water. A double-PEM solid electrolyte reactor was further developed to realize a continuous, selective (∼90%) and stable (over 500 hours) generation of H2O2 via implementing this cation effect for practical applications.

Atomistic Understanding of Two-dimensional Electrocatalysts from First Principles

Two-dimensional electrocatalysts have attracted great interest in recent years for renewable energy applications. However, the atomistic mechanisms are still under debate. Here we review the first-principles studies of the atomistic mechanisms of common 2D electrocatalysts. We first introduce the first-principles models for studying heterogeneous electrocatalysis then discuss the common 2D electrocatalysts with a focus on N doped graphene, single metal atoms in graphene, and transition metal dichalcogenides. The reactions include hydrogen evolution, oxygen evolution, oxygen reduction, and carbon dioxide reduction. Finally, we discuss the challenges and the future directions to improve the fundamental understanding of the 2D electrocatalyst at atomic level.

Revealing Elusive Intermediates of Platinum Cathodic Corrosion through DFT Simulations

Cathodic corrosion of metals discovered more than 120 years ago remains a poorly understood electrochemical process. It is believed that the corrosion intermediates formed during cathodic polarization are extremely short-lived species because of their high reactivity. Together with the concurrent vigorous hydrogen evolution, this makes it challenging to investigate the reaction mechanism and detect the intermediates experimentally. From a computational standpoint, the process also presents a serious challenge as it occurs at rather low negative potentials in concentrated alkaline solutions. Here, we use density-functional-theory calculations to elucidate the identity of reaction intermediates and their reactivity at the Pt(111)/electrolyte interface. By controlling the electrode potential in an experimentally relevant region through constant Fermi-level molecular dynamics, we reveal the formation of alkali cation-stabilized Pt hydrides as intermediates of cathodic corrosion. The results also suggest that the found Pt anions could discharge at the interface to produce H₂ by reacting with either surface-bound hydrogen species or solution water molecules.

Boosting Oxygen Reduction for High-Efficiency H2 O2 Electrosynthesis on Oxygen-Coordinated CoNC Catalysts

Atomically dispersed CoNC is a promising material for H₂ O₂ selective electrosynthesis via a two-electron oxygen reduction reaction. However, the performance of typical CoNC materials with routine CoN₄ active center is insufficient and needs to be improved further. This can be done by fine-tuning its atomic coordination configuration. Here, a single-atom electrocatalyst (Co/NC) is reported that comprises a specifically penta-coordinated CoNC configuration (OCoN₂ C₂ ) with Co center coordinated by two nitrogen atoms, two carbon atoms, and one oxygen atom. Using a combination of theoretical predictions and experiments, it is confirmed that the unique atomic structure slightly increases the charge state of the cobalt center. This optimizes the adsorption energy towards *OOH intermediate, and therefore favors the two-electron ORR relevant for H₂ O₂ electrosynthesis. In neutral solution, the as-synthesized Co/NC exhibits a selectivity of over 90% over a potential ranging from 0.36 to 0.8 V, with a turnover frequency value of 11.48 s^-1 ; thus outperforming the state-of-the-art carbon-based catalysts.

Surface Valence State Effect of MoO2+x on Electrochemical Nitrogen Reduction

The valance of Mo is critical for FeMo cofactor in ambient ammonia synthesis. However, the valence effect of Mo has not been well studied in heterogeneous nanoparticle catalysts for electrochemical nitrogen reduction reaction (NRR) due to the dissolution of Mo as MoO₄^2- in alkaline electrolytes. Here, a MoO_2+x catalyst enriched with surface Mo⁶⁺ is reported. The Mo⁶⁺ is stabilized by a native oxide layer to prevent corrosion and its speciation is identified as (MoO₃ )_n clusters. This native layer with Mo⁶⁺ suppresses the hydrogen evolution significantly and promotes the activation of nitrogen as supported by both experimental characterization and theoretical calculation. The as-prepared MoO_2+x catalyst shows a high ammonia yield of 3.95 µg mg_cat^-1 h^-1 with a high Faradaic efficiency of 22.1% at -0.2 V versus reversible hydrogen electrode, which is much better than the MoO₂ catalyst with Mo⁶⁺ etched away. The accuracy of experimental results for NRR is confirmed by various control experiments and quantitative isotope labeling.

Pseudo-adsorption and long-range redox coupling during oxygen reduction reaction on single atom electrocatalyst

Fundamental understanding of the dynamic behaviors at the electrochemical interface is crucial for electrocatalyst design and optimization. Here, we revisit the oxygen reduction reaction mechanism on a series of transition metal (M = Fe, Co, Ni, Cu) single atom sites embedded in N-doped nanocarbon by ab initio molecular dynamics simulations with explicit solvation. We have identified the dissociative pathways and the thereby emerged solvated hydroxide species for all the proton-coupled electron transfer (PCET) steps at the electrochemical interface. Such hydroxide species can be dynamically confined in a "pseudo-adsorption" state at a few water layers away from the active site and respond to the redox event at the catalytic center in a coupled manner within timescale less than 1 ps. In the PCET steps, the proton species (in form of hydronium in neutral/acidic media or water in alkaline medium) can protonate the pseudo-adsorbed hydroxide without needing to travel to the direct catalyst surface. This, therefore, expands the reactive region beyond the direct catalyst surface, boosting the reaction kinetics via alleviating mass transfer limits. Our work implies that in catalysis the reaction species may not necessarily bind to the catalyst surface but be confined in an active region.