Salicylhydrazine-containing inhibitors of HIV-1 integrase: implication for a selective chelation in the integrase active site

Metal-dependent inhibition of HIV-1 integrase

Human immunodeficiency virus type 1 integrase (HIV-1 IN) is an essential enzyme for effective viral replication. Therefore, IN inhibitors are being sought for chemotherapy against AIDS. We had previously identified a series of salicylhydrazides as potent inhibitors of IN in vitro (Neamati, N.; et al. J. Med. Chem. 1998, 41, 3202-3209.). Herein, we report the design, synthesis, and antiviral activity of three novel mercaptosalicylhydrazide (MSH) derivatives. MSHs were effective against the IN catalytic core domain and inhibited IN binding to HIV LTR DNA. They also inhibited catalytic activities of IN in IN-DNA preassembled complexes. Site-directed mutagenesis and molecular modeling studies suggest that MSHs bind to cysteine 65 and chelate Mg(2+) at the active site of HIV-1 IN. Contrary to salicylhydrazides, the MSHs are 300-fold less cytotoxic and exhibit antiviral activity. They are also active in Mg(2+)-based assays, while IN inhibition by salicylhydrazides is strictly Mn(2+)-dependent. Additionally, in target and cell-based assays, the MSHs have no detectable effect on other retroviral targets, including reverse transcriptase, protease, and virus attachment, and exhibit no detectable activity against human topoisomerases I and II at concentrations that effectively inhibit IN. These data suggest that MSHs are selective inhibitors of HIV-1 IN and may serve as leads for antiviral therapeutics.

QSAR studies of HIV-1 integrase inhibition

Compounds from a wide variety of structural classes inhibit HIV-1 integrase. However, a single unified understanding of the relationship between the structures and activities of these compounds still eludes researchers. We report herein the development of QSAR models for integrase inhibition. The genetic function approximation (GFA) was utilized to select descriptors for the development of the QSAR models. The best QSAR model derived for the complete set of 11 structural classes had a correlation coefficient (r(2)) of only 0.54 and a cross-validated correlation coefficient (q(2)) of only 0.42. This indicated that the compounds studied may differ in the exact relationship between structure and inhibition, perhaps through interactions with different subsets of amino acids in the binding pocket, or through the presence of non-overlapping binding pockets. Descriptor-based cluster analysis indicated that the 11 structural classes of integrase inhibitors studied belonged to two clusters, one consisting of five structural classes, and the other six. QSAR models for these two clusters had r(2) values of 0.79 and 0.82 and q(2) values of 0.71 and 0.74, a significant improvement over models obtained for the complete set of compounds. The two models were applied to predict the activities of compounds from the same structural classes as those used to build the models, giving r(2) values of 0.65 and 0.78. The models were also used to predict the activities of compounds shown in crystallographic or docking studies to interact near the active site metal ion. The model describing the larger cluster of structural classes was better able to reproduce the biological activities of these five structures with an average percent residual error of 7.9 compared with the 19.3% residual error for predictions from the other model. This indicated that the six structural classes comprising the larger cluster may bind near the metal ion in a fashion similar to that observed in one publicly available co-crystal structure of an inhibitor bound to HIV-1 integrase. Flexible alignment of inhibitors in the two clusters found different pharmacophores that are consistent with previously published pharmacophores developed on the basis of individual structural classes that have produced novel inhibitory compounds. Thus we expect that these two QSAR models can be used in the search for novel HIV-1 integrase inhibitors as well as to provide insight into the binding modes of such diverse chemical compounds.

Design, synthesis and evaluation of peptide libraries as potential anti-HIV compounds, via inhibition of gp120/cell membrane interactions, using the gp120/cd4/fab17 crystal structure

The crystal structure of a gp120/CD4/Fab17b complex was analysed leading to the design of several peptide libraries in the hope of obtaining novel gp120/cell membrane receptor interaction inhibitors, especially inhibitors of gp120/CD4 and gp120/chemokine receptor interactions. Syntheses of tri- and tetra- and pentapeptides were performed via a solid phase synthesis methodology using a Rink Amide MBHA resin and a Fmoc strategy giving C-terminal amide form peptides. Compounds were assayed against C8166 cells infected by HIV-1 IIIB and screened using a gp120 binding assay and the FIGS reporter gene assay.

Isolation of two highly potent and non-toxic inhibitors of human immunodeficiency virus type 1 (HIV-1) integrase from Salvia miltiorrhiza

Water soluble extracts of the herbal plant, Salvia miltiorrhiza (Danshen) exhibited potent effect against HIV-1 integrase activity in vitro and viral replication in vivo. We have developed an extensive purification scheme to isolate effective, non-toxic inhibitors against human immunodeficiency virus type 1 (HIV-1) using the 3'-processing activity of integrase as a purification guide and assay. Two water soluble compounds, M(5)22 and M(5)32, have been discovered by isolating them from S. miltiorrhiza roots in purities of >99.5% as shown by NMR spectral analysis with yields of 0.018 and 0.038%, respectively. Structural determination revealed that M(5)22 is lithospermic acid and M(5)32 is lithospermic acid B. These two structurally related compounds are potent anti-HIV inhibitors and showed no cytotoxicity to H9 cells at high concentrations (CC(100)>297 microM for M(5)22 and >223 microM for M(5)32). The IC50 for inhibition of 3'-processing by HIV-1 integrase was found to be 0.83 microM for M(5)22 and 0.48 microM for M(5)32. In addition, M(5)22 and M(5)32 inhibited HIV-1 integrase catalytic activities of 3'-joining to the target DNA with IC50 of 0.48 microM for M(5)22 and 0.37 microM for M(5)32. Furthermore, kinetic and mechanistic studies suggested that drug binding to HIV-1 integrase and inhibition of enzymatic activity occur at a fast rate. Both M(5)22 and M(5)32 do not prevent HIV entry in H9 cells. They also show no inhibition of reverse transcriptase activity in infected cells. The levels of intracellular strong stop and full-length viral DNA remained unchanged following drug treatment. However, both inhibitors strongly suppressed the acute HIV-1 infection of H9 cells with IC50 values of 2 and 6.9 microM for M(5)22 and M(5)32, respectively. Thus these two selective integrase inhibitors hold promise as a novel class of therapeutic drugs for AIDS based on their high potencies and absence of cytotoxicity.

QSAR of HIV-1 integrase inhibitors by genetic function approximation method

Quantitative structure--activity relationship (QSAR) paradigm, using genetic function approximation (GFA) technique was used to examine the correlations between the calculated physicochemical descriptors and the in vitro activities (3'-processing and 3'-strand transfer inhibition) of a series of human immunodeficiency virus type 1 (HIV-1) integrase inhibitors. Depending on the chemical structure, all molecules were divided into two classes---catechols and noncatechols. Eighty-one molecules were used in the present study and they were divided into training set and test set. The training set in each class consisted of 35 molecules and QSAR models were generated separately for both catechols and noncatechols. Equations were evaluated using internal as well as external test set predictions. Models generated for catechols show that electronic, shape related, and thermodynamic parameters are important whereas for noncatechols, spatial, structural, and thermodynamic properties play an important role for the activity.

3D-QSAR and molecular modeling of HIV-1 integrase inhibitors

Three-dimensional quantitative structure-activity relationship (3D QSAR) methods were applied on a series of inhibitors of HIV-1 integrase with respect to their inhibition of 3'-processing and 3'-end joining steps in vitro. The training set consisted of 27 compounds belonging to the class of thiazolothiazepines. The predictive ability of each model was evaluated using test set I consisting of four thiazolothiazepines and test set II comprised of seven compounds belonging to an entirely different structural class of coumarins. Maximum Common Substructure (MCS) based method was used to align the molecules and this was compared with other known methods of alignment. Two methods of 3D QSAR: comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were analyzed in terms of their predictive abilities. CoMSIA produced significantly better results for all correlations. The results indicate a strong correlation between the inhibitory activity of these compounds and the steric and electrostatic fields around them. CoMSIA models with considerable internal as well as external predictive ability were obtained. A poor correlation obtained with hydrophobic field indicates that the binding of thiazolothiazepines to HIV-1 integrase is mainly enthalpic in nature. Further the most active compound of the series was docked into the active site using the crystal structure of integrase. The binding site was formed by the amino acid residues 64-67, 116, 148, 151-152, 155-156, and 159. The comparison of coefficient contour maps with the steric and electrostatic properties of the receptor shows high level of compatibility.

In search of authentic inhibitors of HIV-1 integration

Current strategies for the treatment of HIV infection are based on cocktails of drugs that target the viral reverse transcriptase or protease enzymes. At present, the clinical benefit of this combination therapy for HIV-infected patients is considerable, although it is not clear how long this effect will last taking into account the emergence of multiple drug-resistant viral strains. Addition of new anti-HIV drugs targeting additional steps of the viral replication cycle may increase the potency of inhibition and prevent resistance development. During HIV replication, integration of the viral genome into the cellular chromosome is an essential step catalysed by the viral integrase. Although HIV integrase is an attractive target for antiviral therapy, so far all research efforts have led to the identification of only one series of compounds that selectively inhibit the integration step during HIV replication, namely the diketo acids. In this review we try to address the question why it has proven so difficult to find potent and selective integrase inhibitors. We point to potential pitfalls in defining an inhibitor as an authentic integrase inhibitor, and propose new strategies and technologies for the discovery of authentic HIV integration inhibitors.

Eigen value analysis of HIV-1 integrase inhibitors

A three-dimensional quantitative structure activity relationship using the eigen value analysis (EVA) paradigm applied to 41 HIV-1 integrase inhibitors that inhibit integrase mediated cleavage (3'-processing step) and integration (3'-strand transfer step) in vitro was performed. The training set consisted of 35 molecules from five structurally diverse classes: salicylhydrazines, lichen acids, coumarins, quinones, and thiazolothiazepines. Models derived using semiempirical (MOPAC AM1 and PM3) calculated normal-mode frequencies were compared. The predictive ability of each resultant model was evaluated using a test set comprised of six molecules belonging to a different structural class: hydrazides. Models derived using AM1 method showed considerable internal as well as external predictivity (r(2)(cv) = 0.806, r(2)(pred) = 0.761 for 3'-processing and r(2)(cv) = 0.677, r(2)(pred) = 0.591 for 3'-strand transfer).

Molecular electrostatic potentials as input for the alignment of HIV-1 integrase inhibitors in 3D QSAR

Comparative molecular similarity indices analysis (CoMSIA), a three-dimensional quantitative structure activity relationship (3D QSAR) paradigm, was used to examine the correlations between the calculated physicochemical properties and the in vitro activities (3'-processing and 3'-strand transfer inhibition) of a series of human immunodeficiency virus type 1 (HIV-1) integrase inhibitors. The training set consisted of 34 molecules from five structurally diverse classes: salicylpyrazolinones, dioxepinones, coumarins, quinones, and benzoic hydrazides. The data set was aligned using extrema of molecular electrostatic potentials (MEPs). The predictive ability of the resultant model was evaluated using a test set comprised of 7 molecules belonging to a different structural class of thiazepinediones. A CoMSIA model using an MEP-based alignment showed considerable internal as well external predictive ability (r2(cv) = 0.821, r2(pred) = 0.608 for 3'-processing; and r2(cv) = 0.759, r2(pred.) = 0.660 for 3'-strand transfer).

Targeting HIV-1 integrase

Human immunodeficiency virus Type 1 (HIV-1) integrase is an essential enzyme for the obligatory integration of the viral DNA into the infected cell chromosome. As no cellular homologue of HIV integrase has been identified, this unique HIV-1 enzyme is an attractive target for the development of new therapeutics. Treatment of HIV-1 infection and AIDS currently consists of the use of combinations of HIV-1 inhibitors directed against reverse transcriptase (RT) and protease. However, their numerous side effects and the rapid emergence of drug-resistant variants limit greatly their use in many AIDS patients. In principle, inhibitors of the HIV-1 integrase should be relatively non-toxic and provide additional benefits for AIDS chemotherapy. There have been many major advances in our understanding of the molecular mechanism of the integration reaction, although some critical aspects remain obscure. Several classes of compounds have been screened and further scrutinised for their inhibitory properties against the HIV integrase; however, there are currently no useful inhibitors available clinically for the treatment of AIDS patients. This review describes the current knowledge of the biological functions of the HIV-1 integrase and reports the major classes of integrase inhibitors identified to date.

New targets for inhibitors of HIV-1 replication

Despite the success of protease and reverse transcriptase inhibitors, new drugs to suppress HIV-1 replication are still needed. Several other early events in the viral life cycle (stages before the viral genome is inserted into host cell DNA) are susceptible to drugs, including virus attachment to target cells, membrane fusion and post-entry events such as integration, accessory-gene function and assembly of viral particles. Among these, inhibitors of virus-cell fusion and integration are the most promising candidates.

Retroviral integrase inhibitors year 2000: update and perspectives

HIV-1 integrase is an essential enzyme for retroviral replication and a rational target for the design of anti-AIDS drugs. A number of inhibitors have been reported in the past 8 years. This review focuses on the recent developments in the past 2 years. There are now several inhibitors with known sites of actions and antiviral activity. The challenge is to convert these leads into drugs that will selectively target integrase in vivo, and can be added to our antiviral armamentarium.

Carbonyl J Derivatives: A New Class of HIV-1 Integrase Inhibitors

Integration of a DNA copy of the HIV-1 genome is required for viral replication and pathogenicity, and this highly specific molecular process is mediated by the virus-encoded integrase protein. The requirement for integration, combined with the lack of a known analogous process in mammalian cells, makes integrase an attractive target for therapeutic inhibitors of HIV-1 replication. While many reports of HIV-1 IN inhibitors exist, no such compounds have yet emerged to treat HIV-1 infection. As such, new classes of integrase inhibitors are needed. We have combined molecular modeling and combinatorial chemistry to identify and develop a new class of HIV-1 integrase inhibitors, the Carbonyl J [N,N'-bis(2-(5-hydroxy-7-naphthalenesulfonic acid)urea] derivatives. This new class includes a number of compounds with sub-micromolar IC(50) values for inhibiting purified HIV-1 integrase in vitro. Herein we describe the chemical characteristics that are important for integrase inhibition and cell toxicity within the Carbonyl J derivatives. Copyright 2000 Academic Press.

Identification of a key target sequence to block human immunodeficiency virus type 1 replication within the gag-pol transframe domain

Although the full sequence of the human immunodeficiency virus type 1 (HIV-1) genome has been known for more than a decade, effective genetic antivirals have yet to be developed. Here we show that, of 22 regions examined, one highly conserved sequence (ACTCTTTGGCAACGA) near the 3' end of the HIV-1 gag-pol transframe region, encoding viral protease residues 4 to 8 and a C-terminal Vpr-binding motif of p6(Gag) protein in two different reading frames, can be successfully targeted by an antisense peptide nucleic acid oligomer named PNA(PR2). A disrupted translation of gag-pol mRNA induced at the PNA(PR2)-annealing site resulted in a decreased synthesis of Pr160(Gag-Pol) polyprotein, hence the viral protease, a predominant expression of Pr55(Gag) devoid of a fully functional p6(Gag) protein, and the excessive intracellular cleavage of Gag precursor proteins, hindering the processes of virion assembly. Treatment with PNA(PR2) abolished virion production by up to 99% in chronically HIV-1-infected H9 cells and in peripheral blood mononuclear cells infected with clinical HIV-1 isolates with the multidrug-resistant phenotype. This particular segment of the gag-pol transframe gene appears to offer a distinctive advantage over other regions in invading viral structural genes and restraining HIV-1 replication in infected cells and may potentially be exploited as a novel antiviral genetic target.

Inhibitors of strand transfer that prevent integration and inhibit HIV-1 replication in cells

Integrase is essential for human immunodeficiency virus-type 1 (HIV-1) replication; however, potent inhibition of the isolated enzyme in biochemical assays has not readily translated into antiviral activity in a manner consistent with inhibition of integration. In this report, we describe diketo acid inhibitors of HIV-1 integrase that manifest antiviral activity as a consequence of their effect on integration. The antiviral activity of these compounds is due exclusively to inhibition of one of the two catalytic functions of integrase, strand transfer.

Solution structure of anti-HIV-1 and anti-tumor protein MAP30: structural insights into its multiple functions

We present the solution structure of MAP30, a plant protein with anti-HIV and anti-tumor activities. Structural analysis and subsequent biochemical assays lead to several novel discoveries. First, MAP30 acts like a DNA glycosylase/apurinic (ap) lyase, an additional activity distinct from its known RNA N-glycosidase activity toward the 28S rRNA. Glycosylase/ap lyase activity explains MAP30's apparent inhibition of the HIV-1 integrase, MAP30's ability to irreversibly relax supercoiled DNA, and may be an alternative cytotoxic pathway that contributes to MAP30's anti-HIV/anti-tumor activities. Second, two distinct, but contiguous, subsites are responsible for MAP30's glycosylase/ap lyase activity. Third, Mn2+ and Zn2+ interact with negatively charged surfaces next to the catalytic sites, facilitating DNA substrate binding instead of directly participating in catalysis.

Thiazolothiazepine inhibitors of HIV-1 integrase

A series of thiazolothiazepines were prepared and tested against purified human immunodeficiency virus type-1 integrase (HIV-1 IN) and viral replication. Structure-activity studies reveal that the compounds possessing the pentatomic moiety SC(O)CNC(O) with two carbonyl groups are in general more potent against purified IN than those containing only one carbonyl group. Substitution with electron-donating or -withdrawing groups did not enhance nor abolish potency against purified IN. By contrast, compounds with a naphthalene ring system showed enhanced potency, suggesting that a hydrophobic pocket in the IN active site might accommodate an aromatic system rather than a halogen. The position of sulfur in the thiazole ring appears important for potency against IN, as its replacement with an oxygen or carbon abolished activity. Further extension of the thiazole ring diminished potency. Compounds 1, 19, and 20 showed antiviral activity and inhibited IN within similar concentrations. These compounds inhibited IN when Mn(2+) or Mg(2+) was used as cofactor. None of these compounds showed detectable activities against HIV-1 reverse transcriptase, protease, virus attachment, or nucleocapsid protein zinc fingers. Therefore, thiazolothiazepines are potentially important lead compounds for development as inhibitors of IN and HIV replication.

Inhibitors of human immunodeficiency virus integrase

Integration of the viral DNA into a host cell chromosome is an essential step for HIV replication and maintenance of persistent infection. Two viral factors are essential for integration: the viral DNA termini (the att sites) and IN. Accruing knowledge of the IN structure, catalytic mechanisms, and interactions with other proteins can be used to design strategies to block integration. A large number of inhibitors have been identified that can be used as leads for the development of potent and selective anti-IN drugs with antiviral activity.