Effects of the presence or absence of a protein corona on silica nanoparticle uptake and impact on cells

Protein Binding Leads to Reduced Stability and Solvated Disorder in the Polystyrene Nanoparticle Corona

Understanding the conformation of proteins in the nanoparticle corona has important implications in how organisms respond to nanoparticle-based drugs. These proteins coat the nanoparticle surface, and their properties will influence the nanoparticle's interaction with cell targets and the immune system. While some coronas are thought to be disordered, two key unanswered questions are the degree of disorder and solvent accessibility. Here, using a comprehensive thermodynamic approach, along with supporting spectroscopic experiments, we develop a model for protein corona disorder in polystyrene nanoparticles of varying size. For two different proteins, we find that binding affinity decreases as nanoparticle size increases. The stoichiometry of binding, along with changes in the hydrodynamic size, support a highly solvated, disordered protein corona anchored at a small number of enthalpically-driven attachment sites. The scaling of the stoichiometry vs. nanoparticle size is consistent disordered polymer dimensions. Moreover, we find that proteins are destabilized less severely in the presence of larger nanoparticles, and this is supported by measurements of hydrophobic exposure, which becomes less pronounced at lower curvatures. Our observations hold for flat polystyrene surfaces, which, when controlled for total surface area, have the lowest hydrophobic exposure of all systems. Our model provides an explanation for previous observations of increased amyloid fibrillation rates in the presence of larger nanoparticles, and it may rationalize how cell receptors can recognize protein disorder in therapeutic nanoparticles.

Protein Adsorption, Calcium-Binding Ability, and Biocompatibility of Silver Nanoparticle-Loaded Polyvinyl Alcohol (PVA) Hydrogels Using Bone Marrow-Derived Mesenchymal Stem Cells

Several approaches have evolved to facilitate the exploration of hydrogel systems in biomedical research. In this sense, poly(vinyl alcohol) (PVA) has been widely used in hydrogel (HG) fabrication for several therapeutic applications. The biological properties of PVA hydrogels (PVA-HGs) are highly dependent on their interaction with protein receptors and extracellular matrix (mainly calcium) deposition, for which there is not enough evidence from existing research yet. Thus, for the first time, the functional properties, like protein and mineral interactions, related to the proliferation of mesenchymal stem cells (MSCs) by silver nanoparticle (AgNP)-loaded PVA hydrogels (AgNPs-PVA-HGs) were investigated in the present study. The UV absorption spectrum and TEM microscopic results showed a maximum absorbance of synthesized AgNPs at 409 nm, with an average particle size of 14.5 ± 2.5 nm, respectively. The functional properties, such as the calcium-binding and the protein adsorption of PVA-HG, were accelerated by incorporating AgNPs; however, the swelling properties of the HGs were reduced by AgNPs, which might be due to the masking of the free functional groups (hydroxyl groups of PVA) by AgNPs. SEM images showed the presence of AgNPs with a more porous structure in the HGs. The proliferative effect of MSCs increased over culture time from day 1 to day 7, and the cell proliferative effect was upregulated by HGs with more pronounced AgNPs-PVA-HG. In addition, both HGs did not produce any significant cytotoxicity in the MSCs. The histological (bright light and H&E staining) and fluorescence microscopic images showed the presence of a cytoskeleton and the fibrillar structure of the MSCs, and the cells adhered more firmly to all HGs. More fibrillar bipolar and dense fibrillar structures were seen in the day 1 and day 7 cultures, respectively. Interestingly, the MSCs cultured on AgNPs-PVA-HG produced extracellular matrix deposition on day 7. Accordingly, the present results proved the biocompatibility of AgNPs-PVA-HG as a suitable system for culturing mammalian stem cells for regenerative tissue applications.

Cellular Uptake Mechanism of Nucleic Acid Nanocapsules and Their DNA-Surfactant Building Blocks

Nucleic acid nanocapsules (NANs) are enzyme-responsive DNA-functionalized micelles built for the controlled release of DNA-surfactant conjugates (DSCs) that present sequences with demonstrated therapeutic potential. Here, we investigate the mechanisms by which DSCs gain access to intracellular space in vitro and determine the effects of serum on the overall uptake and internalization mechanism of NANs. Using pharmacological inhibitors to selectively block certain pathways, we show, through confocal visualization of cellular distribution and flow cytometry quantification of total cellular association, that scavenger receptor-mediated, caveolae-dependent endocytosis is the major cellular uptake pathway of NANs in the presence and absence of serum. Furthermore, as NANs can be triggered to release DSCs by external stimuli such as enzymes, we sought to examine the uptake profile of particles degraded by enzymes prior to cell-based assays. We found that while scavenger receptor-mediated, caveolae-dependent endocytosis is still at play, energy-independent pathways as well as clathrin-mediated endocytosis are also involved. Overall, this study has helped to elucidate early steps in the cytosolic delivery and therapeutic activity of DSCs packaged into a micellular NAN platform while shedding light on the way in which DNA functionalized nanomaterials in general can be trafficked into cells both as nanostructures and as molecular entities. Importantly, our study also shows that the NAN design in particular is able to stabilize nucleic acids when delivered in the presence of serum, a critical step for effective therapeutic nucleic acid delivery.

Pharmacokinetics and tumor delivery of nanoparticles

Nanoparticles (NPs) have been widely used in different areas, including consumer products and medicine. In terms of biomedical applications, NPs or NP-based drug formulations have been extensively investigated for cancer diagnostics and therapy in preclinical studies, but the clinical translation rate is low. Therefore, a thorough and comprehensive understanding of the pharmacokinetics of NPs, especially in drug delivery efficiency to the target therapeutic tissue tumor, is important to design more effective nanomedicines and for proper assessment of the safety and risk of NPs. This review article focuses on the pharmacokinetics of both organic and inorganic NPs and their tumor delivery efficiencies, as well as the associated mechanisms involved. We discuss the absorption, distribution, metabolism, and excretion (ADME) processes following different routes of exposure and the mechanisms involved. Many physicochemical properties and experimental factors, including particle type, size, surface charge, zeta potential, surface coating, protein binding, dose, exposure route, species, cancer type, and tumor size can affect NP pharmacokinetics and tumor delivery efficiency. NPs can be absorbed with varying degrees following different exposure routes and mainly accumulate in liver and spleen, but also distribute to other tissues such as heart, lung, kidney and tumor tissues; and subsequently get metabolized and/or excreted mainly through hepatobiliary and renal elimination. Passive and active targeting strategies are the two major mechanisms of tumor delivery, while active targeting tends to have less toxicity and higher delivery efficiency through direct interaction between ligands and receptors. We also discuss challenges and perspectives remaining in the field of pharmacokinetics and tumor delivery efficiency of NPs.

Effect of Albumin Corona Conformation on In Vitro and In Vivo Profiles of Intravenously Administered Nanoparticles

Under physiological conditions, nanoparticles (NPs) inevitably interact with proteins, resulting in extensive protein adsorption and the formation of a protein corona. Recent studies have shown that the different surface properties of NPs lead to varying degrees of conformational changes of adsorbed proteins. However, the impact of corona protein conformation on the in vitro and in vivo profiles of NPs remain largely unexplored. Herein, d-α-tocopherol polyethylene glycol 1000 succinate-based NPs with natural human serum albumin (HSA_N) corona or thermally denatured HSA (HSA_D) corona were synthesized following a previously established method. We then conducted a systematic study of the protein conformation as well as adsorption behaviors. Additionally, the impact of protein corona conformation on the NPs profiles in vitro and in vivo were elucidated to gain insight into its biological behaviors as a targeted delivery system for renal tubule diseases. Overall, NPs modified by HSA_N corona showed improved serum stability, greater cell uptake efficiency, better renal tubular targetability, and therapeutic efficacy on acute kidney injury in rats than NPs modified by HSA_D corona. Hence, the conformation of protein adsorbed on the surface of NPs may impact the in vitro and in vivo profiles of NPs.

TiO2-MWCNT nanohybrid: Cytotoxicity, protein corona formation and cellular internalisation in RTG-2 fish cell line

Titanium dioxide nanoparticles-multiwalled carbon nanotubes (TiO_2-MWCNT) nanohydrid has an enhanced photocatalytic activity across the visible light with promising applications in environmental remediation, solar energy devices and antimicrobial technologies. However, it is necessary to evaluate the toxicological effects of TiO_2-MWCNT towards safe and sustainable development of nanohybrids. In this work, we studied the cytotoxicity, protein corona formation and cellular internalisation of TiO_2-MWCNT on fibroblasts derived from gonadal rainbow trout tissue (RTG-2) for the first time. This nanohydrid did not show any toxicity effect on RTG-2 cells up to 100 mg L^-1 after 24 h of exposure as monitored by alamar blue, neutral red and trypan blue assays (in presence or absence of foetal bovine serum, FBS). Futhermore, cryo-transmission electron microscopy analysis demonstrated that TiO₂ particles is attached on nanotube surface after FBS-protein corona formation in cell culture medium. Raman spectroscopy imaging showed that TiO_2-MWCNT can be internalised by RTG-2 cells. This work is a novel contribution towards better understanding the nanobiointeractions of nanohydrids linked to their in vitro effects on fish cells in aquatic nanoecotoxicology.

The protein corona from nanomedicine to environmental science

The protein corona spontaneously develops and evolves on the surface of nanoscale materials when they are exposed to biological environments, altering their physiochemical properties and affecting their subsequent interactions with biosystems. In this Review, we provide an overview of the current state of protein corona research in nanomedicine. We next discuss remaining challenges in the research methodology and characterization of the protein corona that slow the development of nanoparticle therapeutics and diagnostics, and we address how artificial intelligence can advance protein corona research as a complement to experimental research efforts. We then review emerging opportunities provided by the protein corona to address major issues in healthcare and environmental sciences. This Review details how mechanistic insights into nanoparticle protein corona formation can broadly address unmet clinical and environmental needs, as well as enhance the safety and efficacy of nanobiotechnology products.

The Potential of ICP-MS as a Complementary Tool in Nanoparticle-Protein Corona Analysis

The prolific applicability of nanomaterials has made them a common citizen in biological systems, where they interact with proteins forming a biological corona complex. These complexes drive the interaction of nanomaterials with and within the cells, bringing forward numerous potential applications in nanobiomedicine, but also arising toxicological issues and concerns. Proper characterization of the protein corona complex is a great challenge typically handled with the combination of several techniques. Surprisingly, despite inductively coupled plasma mass spectrometry (ICP-MS) being a powerful quantitative technique whose application in nanomaterials characterization and quantification has been consolidated in the last decade, its application to nanoparticle-protein corona studies is scarce. Furthermore, in the last decades, ICP-MS has experienced a turning point in its capabilities for protein quantification through sulfur detection, hence becoming a generic quantitative detector. In this regard, we would like to introduce the potential of ICP-MS in the nanoparticle protein corona complex characterization and quantification complementary to current methods and protocols.

Optimal delivery strategies for nanoparticle-mediated mRNA delivery

Messenger RNA (mRNA) has emerged as a new and efficient agent for the treatment of various diseases. The success of lipid nanoparticle-mRNA against the novel coronavirus (SARS-CoV-2) pneumonia epidemic has proved the clinical potential of nanoparticle-mRNA formulations. However, the deficiency in the effective biological distribution, high transfection efficiency and good biosafety are still the major challenges in clinical translation of nanomedicine for mRNA delivery. To date, a variety of promising nanoparticles have been constructed and then gradually optimized to facilitate the effective biodistribution of carriers and efficient mRNA delivery. In this review, we describe the design of nanoparticles with an emphasis on lipid nanoparticles, and discuss the manipulation strategies for nanoparticle-biology (nano-bio) interactions for mRNA delivery to overcome the biological barriers and improve the delivery efficiency, because the specific nano-bio interaction of nanoparticles usually remoulds the biomedical and physiological properties of the nanoparticles especially the biodistribution, mechanism of cellular internalization and immune response. Finally, we give a perspective for the future applications of this promising technology. We believe that the regulation of nano-bio interactions would be a significant breakthrough to improve the mRNA delivery efficiency and cross biological barriers. This review may provide a new direction for the design of nanoparticle-mediated mRNA delivery systems.

An integrative method for evaluating the biological effects of nanoparticle-protein corona

BACKGROUND

Nanoplastics in the environment can enter the human body through gastrointestinal intake, dermal contact, and pulmonary inhalation, posing a threat to human health. Protein molecules in body fluids will quickly adsorb on the surfaces of the nanoplastics, forming a protein corona, which has implications for the interaction of the nanoplastics with cells and the metabolic pathways of the nanoplastic within cells. For years, practical tools such as dynamic light scattering, transmission electron microscopy, and liquid chromatography have been developed to understand the protein corona of nanoparticles (NPs), either in vitro or in cellular or molecular level. However, an integrated approach to understand the nanoparticles-protein corona is still lacking.

METHODS

Using the most frequently observed environmental nanoplastics, polystyrene nanoplastics (PS), as a standard, we established an integrative structural characterization platform, a biophysical and biochemical evaluation method to investigate the effect of surface charge on protein corona composition. The cellular and molecular mechanisms were also explored through in vitro cellular experiments.

RESULTS

The first integrative method for characterizing biological properties of NPs-protein corona has been established. This method comprehensively covers the critical aspects to understand NPs-protein corona interactions, from structure to function.

CONCLUSIONS

The integrative method for nanoplastics microstructure characterization can be applied to the structural characterization of nanoparticles in nanoscale, which is of universal significance from in vitro characterization to cellular experiments and then to molecular mechanism studies.

GENERAL SIGNIFICANCE

This strategy has high reliability and repeatability and can be applied both in environment and nanomedicine safety assessment.

Sex-Specific Silica Nanoparticle Protein Corona Compositions Exposed to Male and Female BALB/c Mice Plasmas

As various nanoparticles (NPs) are increasingly being used in nanomedicine products for more effective and less toxic therapy and diagnosis of diseases, there is a growing need to understand their biological fate in different sexes. Herein, we report a proof-of-concept result of sex-specific protein corona compositions on the surface of silica NPs as a function of their size and porosity upon incubation with plasma proteins of female and male BALB/c mice. Our results demonstrate substantial differences between male and female protein corona profiles on the surface of silica nanoparticles. By comparing protein abundances between male and female protein coronas of mesoporous silica nanoparticles and Stöber silica nanoparticles of ∼100, 50, and 100 nm in diameter, respectively, we detected 17, 4, and 4 distinct proteins, respectively, that were found at significantly different concentrations for these constructs. These initial findings demonstrate that animal sex can influence protein corona formation on silica NPs as a function of the physicochemical properties. A more thorough consideration of the role of plasma sex would enable nanomedicine community to design and develop safer and more efficient diagnostic and therapeutic nanomedicine products for both sexes.

Mesoporous Silica Particles Retain Their Structure and Function while Passing through the Gastrointestinal Tracts of Mice and Humans

Mesoporous silica particles (MSPs) can be used as food additives, clinically for therapeutic applications, or as oral delivery vehicles. It has also been discussed to be used for a number of novel applications including treatment for diabetes and obesity. However, a major question for their possible usage has been if these particles persist structurally and retain their effect when passing through the gastrointestinal tract (GIT). A substantial breaking down of the particles could reduce function and be clinically problematic for safety issues. Hence, we investigated the biostability of MSPs of the SBA-15 kind prepared at large scales (100 and 1000 L). The MSPs were orally administered in a murine model and clinically in humans. A joint extraction and calcination method was developed to recover the MSPs from fecal mass, and the MSPs were characterized physically, structurally, morphologically, and functionally before and after GIT passage. Analyses with N2 adsorption, X-ray diffraction, electron microscopy, and as a proxy for general function, adsorption of the enzyme α-amylase, were conducted. The adsorption capacity of α-amylase on extracted MSPs was not reduced as compared to the pristine and control MSPs, and adsorption of up to 17% (w/w) was measured. It was demonstrated that the particles did not break down to any substantial degree and retained their function after passing through the GITs of the murine model and in humans. The fact the particles were not absorbed into the body was ascribed to that they were micron-sized and ingested as agglomerates and too big to pass the intestinal barrier. The results strongly suggest that orally ingested MSPs can be used for a number of clinical applications.

Yeast-derived vacuoles as a novel carrier with enhanced hCMEC/D3 cell monolayer penetration

The blood-brain barrier (BBB) is a brain protection structure that restricts drug delivery from the blood to the central nervous system. Thus, we developed a novel drug carrier using yeast vacuoles to overcome this problem. The purpose of this study was to assess the drug transportability of yeast vacuoles using a human cerebral microvascular endothelial cell line (hCMEC/D3) cell monolayer. Here, we used daunorubicin (DNR) as a microtubule-targeting agent with the ability to disaggregate pre-formed fibrils and prevent Tau fibrillization. An in vitro model was developed by culturing hCMEC/D3 cells on Transwell inserts in EBM-2 endothelial basal medium until the cells formed a monolayer. Next, nano-sized yeast vacuoles were loaded with DNR, and the signals inside and outside the hMEC/D3 cell monolayer were detected using the GloMax^® Explorer fluorometer. DNR penetrated the cell monolayer and was regulated by endocytosis via receptor-mediated macropinocytosis on the surface of the cell. Confocal imaging showed a significant increase in intracellular DNR fluorescence when the cells were treated with the vacuole-encapsulated drug. These results indicate that the drug penetrated the hCMEC/D3 cell monolayer via encapsulation into the vacuoles. Overall, yeast-derived vacuoles are promising candidates as drug carriers to the brain.

The State of the Art and Challenges of In Vitro Methods for Human Hazard Assessment of Nanomaterials in the Context of Safe-by-Design

The Safe-by-Design (SbD) concept aims to facilitate the development of safer materials/products, safer production, and safer use and end-of-life by performing timely SbD interventions to reduce hazard, exposure, or both. Early hazard screening is a crucial first step in this process. In this review, for the first time, commonly used in vitro assays are evaluated for their suitability for SbD hazard testing of nanomaterials (NMs). The goal of SbD hazard testing is identifying hazard warnings in the early stages of innovation. For this purpose, assays should be simple, cost-effective, predictive, robust, and compatible. For several toxicological endpoints, there are indications that commonly used in vitro assays are able to predict hazard warnings. In addition to the evaluation of assays, this review provides insights into the effects of the choice of cell type, exposure and dispersion protocol, and the (in)accurate determination of dose delivered to cells on predictivity. Furthermore, compatibility of assays with challenging advanced materials and NMs released from nano-enabled products (NEPs) during the lifecycle is assessed, as these aspects are crucial for SbD hazard testing. To conclude, hazard screening of NMs is complex and joint efforts between innovators, scientists, and regulators are needed to further improve SbD hazard testing.

Large-Scale Cultivation of Magnetotactic Bacteria and the Optimism for Sustainable and Cheap Approaches in Nanotechnology

Magnetotactic bacteria (MTB), a diverse group of marine and freshwater microorganisms, have attracted the scientific community's attention since their discovery. These bacteria biomineralize ferrimagnetic nanocrystals, the magnetosomes, or biological magnetic nanoparticles (BMNs), in a single or multiple chain(s) within the cell. As a result, cells experience an optimized magnetic dipolar moment responsible for a passive alignment along the lines of the geomagnetic field. Advances in MTB cultivation and BMN isolation have contributed to the expansion of the biotechnological potential of MTB in recent decades. Several studies with mass-cultured MTB expanded the possibilities of using purified nanocrystals and whole cells in nano- and biotechnology. Freshwater MTB were primarily investigated in scaling up processes for the production of BMNs. However, marine MTB have the potential to overcome freshwater species applications due to the putative high efficiency of their BMNs in capturing molecules. Regarding the use of MTB or BMNs in different approaches, the application of BMNs in biomedicine remains the focus of most studies, but their application is not restricted to this field. In recent years, environment monitoring and recovery, engineering applications, wastewater treatment, and industrial processes have benefited from MTB-based biotechnologies. This review explores the advances in MTB large-scale cultivation and the consequent development of innovative tools or processes.

Toxic implications of silver nanoparticles on the central nervous system: A systematic literature review

Silver nanoparticles have many medical and commercial applications, but their effects on human health are poorly understood. They are used extensively in products of daily use, but little is known about their potential neurotoxic effects. A xenobiotic metal, silver, has no known physiological significance in the human body as a trace metal. Biokinetics of silver nanoparticles indicates its elimination from the body via urine and feces route. However, a substantial amount of evidence from both in vitro and in vivo experimental research unequivocally establish the fact of easier penetration of smaller nanoparticles across the blood-brain barrier to enter in brain and thereby interaction with cellular components to induce neurotoxic effects. Toxicological effects of silver nanoparticles rely on the degree of exposure, particle size, surface coating, and agglomeration state as well as the type of cell or organism used to evaluate its toxicity. This review covers pertinent facts and the present state of knowledge about the neurotoxicity of silver nanoparticles reviewing the impacts on oxidative stress, neuroinflammation, mitochondrial function, neurodegeneration, apoptosis, and necrosis. The effect of silver nanoparticles on the central nervous system is a topic of growing interest and concern that requires immediate consideration.

Cell surface biotinylation to identify the receptors involved in nanoparticle uptake into endothelial cells

Targeted drug delivery requires -among others- specific interaction of nanocarriers with cell surface receptors enabling efficient internalization into the targeted cells. Thus, identification of receptors allowing efficient nanocarrier uptake is essential to improve the design of targeted nanomedicines. Here we used methods based on cell surface biotinylation to identify cell surface receptors mediating nanoparticle uptake by cells. We used human brain and liver endothelial cells as representative examples of cells typically showing very low and very high nanoparticle uptake, respectively. Amino-modified and carboxylated silica were used as model nanoparticles usually associated with high and low uptake into cells, respectively, and carrying different coronas after exposure in full human plasma. Using cell surface biotinylation of live cells and receptor pull-down assays, we compared the receptors internalized in control untreated cells and those internalized upon exposure to nanoparticles. In this way, we identified receptors associated with (high) nanoparticle uptake. The candidate receptors were further validated by decorating the nanoparticles with an artificial corona consisting of the respective receptor ligands. We found that a vitronectin corona can be used to target integrin receptors and strongly enhances nanoparticle uptake in brain and liver endothelial cells. The increased uptake was maintained in the presence of serum, suggesting that the vitronectin-corona could resist interaction and competition with serum. Furthermore, plasminogen-coated nanoparticles promoted uptake in endothelial cells of the liver, but not of the brain. The presented approach using reversible biotinylation of cell surface receptors in live cells allows for receptor-based targeting of nanocarriers that are instrumental in nanoparticle uptake, which can be exploited for targeted drug delivery. STATEMENT OF SIGNIFICANCE: In order to deliver drugs to their site of action, drug-loaded nanocarriers can be targeted to cell receptors enabling efficient uptake into target cells. Thus, methods to identify nanocarrier receptors are invaluable. Here we used reversible biotinylation of live cells and receptor pull-down approaches for receptor identification. By comparative analysis of the individual receptors internalized in untreated cells and cells exposed to nanoparticles, we identified receptors enabling high nanoparticle uptake into liver and brain endothelial cells. Their role was confirmed by decorating nanoparticles with an artificial corona composed of the receptor ligands. In conclusion, live cell reversible biotinylation of cell surface proteins is a powerful tool for the identification of potential receptors for receptor-based targeting of nanocarriers.

Recognition and movement of polystyrene nanoplastics in fish cells

Although nanoplastics are being increasingly scrutinized, little is known about their kinetic behavior in living organisms, especially in cellular systems. Herein, nonspecific interactions of three polystyrene nanoplastics (pristine-PS, NH₂-PS, and COOH-PS, with size range of 90-100 nm and at concentrations of 0-100 μg mL^-1) with zebrafish cells were quantified for their cellular uptake and exocytosis. Cell uptake of nanoplastics reached a peak within 2 h and then decreased. The overall nanoplastics uptake was dominated by PS-particle internalization. The estimated uptake rate was comparable among the different types of PS (pristine-PS, NH₂-PS, and COOH-PS), but the uptake capacity was related to their functionality. The clathrin-mediated and caveolae-mediated pathways were mainly involved in the uptake of the three nanoplastics. The internalized PS-particles were initially delivered to the cytoplasm but then transported to lysosomes using energy. Meanwhile, these PS particles were released by the cells via energy-free penetration and energy-dependent lysosomal exocytosis. PS-particles were removed by the cells at a relatively slow rate, and the estimated retention half-lives of these PS-particles were 10.1 h, 12.0 h and 15.1 h for pristine-PS, NH₂-PS and COOH-PS particles, respectively, in fish cells based on our kinetic measurements. Intracellular trajectory modeling of nanoplastics movement is critical for the environmental and human health risk assessment.

Protein corona: Friend or foe? Co-opting serum proteins for nanoparticle delivery

For systemically delivered nanoparticles to reach target tissues, they must first circulate long enough to reach the target and extravasate there. A challenge is that the particles end up engaging with serum proteins and undergo immune cell recognition and premature clearance. The serum protein binding, also known as protein corona formation, is difficult to prevent, even with artificial protection via "stealth" coating. Protein corona may be problematic as it can interfere with the interaction of targeting ligands with tissue-specific receptors and abrogate the so-called active targeting process, hence, the efficiency of drug delivery. However, recent studies show that serum protein binding to circulating nanoparticles may be actively exploited to enhance their downstream delivery. This review summarizes known issues of protein corona and traditional strategies to control the corona, such as avoiding or overriding its formation, as well as emerging efforts to enhance drug delivery to target organs via nanoparticles. It concludes with a discussion of prevailing challenges in exploiting protein corona for nanoparticle development.

Tuning Liposome Stability in Biological Environments and Intracellular Drug Release Kinetics

Ideal drug carriers should be stable in biological environments but eventually release their drug load once inside the targeted cells. These two aspects can be in contrast with each other, thus they need to be carefully tuned in order to achieve the desired properties for specific applications. Quantifying drug release profiles in biological environments or inside cells can be highly challenging, and standard methods to determine drug release kinetics in many cases cannot be applied to complex biological environments or cells. Within this context, the present work combined kinetic studies by flow cytometry with aging experiments in biological fluids and size-exclusion chromatography to determine drug release profiles in biological environments and inside cells. To this purpose, anionic and zwitterionic liposomes were used as model nanomedicines. By changing lipid composition, liposome stability in serum and intracellular release kinetics could be tuned and formulations with very different properties could be obtained. The methods presented can be used to characterize liposome release profiles in complex biological media, as well as inside cells. In this way, liposome composition can be tuned in order to achieve formulations with optimal balance between stability and release kinetics for specific applications.

Macrophages Release Extracellular Vesicles of Different Properties and Composition Following Exposure to Nanoparticles

Extracellular vesicles are membrane-bound carriers with complex cargoes, which play a major role in intercellular communication, for instance, in the context of the immune response. Macrophages are known to release extracellular vesicles in response to different stimuli, and changes in their size, number, and composition may provide important insights into the responses induced. Macrophages are also known to be highly efficient in clearing nanoparticles, when in contact with them, and in triggering the immune system. However, little is known about how the nature and composition of the vesicles released by these cells may vary upon nanoparticle exposure. In order to study this, in this work, alveolar-like macrophages were exposed to a panel of nanoparticles with varying surface and composition, including amino-modified and carboxylated polystyrene and plain silica. We previously showed that these nanoparticles induced very different responses in these cells. Here, experimental conditions were carefully tuned in order to separate the extracellular vesicles released by the macrophages several hours after exposure to sub-toxic concentrations of the same nanoparticles. After separation, different methods, including high-sensitivity flow cytometry, TEM imaging, Western blotting, and nanoparticle tracking analysis, were combined in order to characterize the extracellular vesicles. Finally, proteomics was used to determine their composition and how it varied upon exposure to the different nanoparticles. Our results show that depending on the nanoparticles' properties. The macrophages produced extracellular vesicles of varying number, size, and protein composition. This indicates that macrophages release specific signals in response to nanoparticles and overall suggests that extracellular vesicles can reflect subtle responses to nanoparticles and nanoparticle impact on intercellular communication.

The effect of biomolecular corona on adsorption onto and desorption from a model lipid membrane

The current lack of insight into nanoparticle-cell membrane interactions hampers smart design strategies and thereby the development of effective nanodrugs. Quantitative and methodical approaches utilizing cell membrane models offer an opportunity to unravel particle-membrane interactions in a detailed manner under well controlled conditions. Here we use total internal reflection microscopy for real-time studies of the non-specific interactions between nanoparticles and a model cell membrane at 50 ms temporal resolution over a time course of several minutes. Maintaining a simple lipid bilayer system across conditions, adsorption and desorption were quantified as a function of biomolecular corona, particle size and fluid flow. The presence of a biomolecular corona reduced both the particle adsorption rate onto the membrane and the duration of adhesion, compared to pristine particle conditions. Particle size, on the other hand, was only observed to affect the adsorption rate. The introduction of flow reduced the number of adsorption events, but increased the residence time. Lastly, altering the composition of the membrane itself resulted in a decreased number of adsorption events onto negatively charged bilayers compared to neutral bilayers. Overall, a model membrane system offers a facile platform for real-time imaging of individual adsorption-desorption processes, revealing complex adsorption kinetics, governed by particle surface energy, size dependent interaction forces, flow and membrane composition.

Deciphering the Effects of 2D Black Phosphorus on Disrupted Hematopoiesis and Pulmonary Immune Homeostasis Using a Developed Flow Cytometry Method

As an emerging two-dimensional nanomaterial with promising prospects, mono- or few-layer black phosphorus (BP) is potentially toxic to humans. We investigated the effects of two types of BPs on adult male mice through intratracheal instillation. Using the flow cytometry method, the generation, migration, and recruitment of immune cells in different organs have been characterized on days 1, 7, 14, and 21 post-exposure. Compared with small BP (S-BP, lateral size at ∼188 nm), large BP (L-BP, lateral size at ∼326 nm) induced a stronger stress lymphopoiesis and B cell infiltration into the alveolar sac. More importantly, L-BP dramatically increased peripheral neutrophil (NE) counts up to 1.9-fold on day 21 post-exposure. Decreased expression of the CXCR4 on NEs, an important regulator of NE retention in the bone marrow, explained the increased NE release into the circulation induced by L-BP. Therefore, BP triggers systemic inflammation via the disruption of both the generation and migration of inflammatory immune cells.

Quantitative comparison of the protein corona of nanoparticles with different matrices

Nanoparticles (NPs) are paving the way for improved treatments for difficult to treat diseases diseases; however, much is unknown about their fate in the body. One important factor is the interaction between NPs and blood proteins leading to the formation known as the “protein corona” (PC). The PC, consisting of the Hard (HC) and Soft Corona (SC), varies greatly based on the NP composition, size, and surface properties. This highlights the need for specific studies to differentiate the PC formation for each individual NP system. This work focused on comparing the HC and SC of three NPs with different matrix compositions: a) polymeric NPs based on poly(lactic-co-glycolic) acid (PLGA), b) hybrid NPs consisting of PLGA and Cholesterol, and c) lipidic NPs made only of Cholesterol. NPs were formulated and characterized for their physico-chemical characteristics and composition, and then were incubated in human plasma. In-depth purification, identification, and statistical analysis were then performed to identify the HC and SC components. Finally, similar investigations demonstrated whether the presence of a targeting ligand on the NP surface would affect the PC makeup. These results highlighted the different PC fingerprints of these NPs, which will be critical to better understand the biological influences of the PC and improve future NP designs.

•

NPs with different matrices were formulated: PLGA, Cholesterol, or mixed PLGA-Chol hybrids.

•

The hard and soft corona of each formulation was quantified and compared.

•

The PC seems to be more strongly affected by the polymer rather than the lipid in mixed NPs.

•

The soft corona depends more on the hard corona composition than on the matrix.

•

Surface modification with a targeting ligand did not influence PC composition.

Design principles of bioinspired interfaces for biomedical applications in therapeutics and imaging

In the past two decades, we have witnessed rapid developments in nanotechnology, especially in biomedical applications such as drug delivery, biosensing, and bioimaging. The most commonly used nanomaterials in biomedical applications are nanoparticles, which serve as carriers for various therapeutic and contrast reagents. Since nanomaterials are in direct contact with biological samples, biocompatibility is one of the most important issues for the fabrication and synthesis of nanomaterials for biomedical applications. To achieve specific recognition of biomolecules for targeted delivery and biomolecular sensing, it is common practice to engineer the surfaces of nanomaterials with recognition moieties. This mini-review summarizes different approaches for engineering the interfaces of nanomaterials to improve their biocompatibility and specific recognition properties. We also focus on design strategies that mimic biological systems such as cell membranes of red blood cells, leukocytes, platelets, cancer cells, and bacteria.

Stem cell membrane-coated abiotic nanomaterials for biomedical applications

Nanoscale materials have been extensively employed for diagnostic and therapeutic purposes. However, the developed nanosystems still suffer from some limitations, namely the rapid elimination by the immune system, lack of targeting to specific cells, and insufficient biocompatibility. Therefore, novel strategies based upon a biomimetic approach have received attention to improving the pharmacokinetics and safety profile of nanosystems. One promising strategy is the application of a biomimetic coating consisting of cell membranes derived from different cell types onto nanoparticle cores. Stem cells have been investigated to develop targeted nanodevices owing to their excellent intrinsic tissue-specific homing features, protecting them from the immune system to reach the sites of inflammation. This targeting ability is conferred by a surface repertoire of stem cell-associated biomolecules. Such nanoscopical materials offer sustained circulation and boosted drug accumulation at target sites, augmenting therapeutic efficacy and safety. Additionally, the coating of nanoparticles with cell membranes acts as a camouflage mechanism to increase their circulation time. The current review explores the particular features of stem cell membrane coating as multifunctional biomimetic surface functionalization agents to camouflage nanoparticle cores. Biomedical applications of engineered stem cell membrane-coated nanoparticles, challenges in clinical translation, and their future prospects are addressed.

The Yin and Yang of the protein corona on the delivery journey of nanoparticles

Nanoparticles-based drug delivery systems have attracted significant attention in biomedical fields because they can deliver loaded cargoes to the target site in a controlled manner. However, tremendous challenges must still be overcome to reach the expected targeting and therapeutic efficacy in vivo. These challenges mainly arise because the interaction between nanoparticles and biological systems is complex and dynamic and is influenced by the physicochemical properties of the nanoparticles and the heterogeneity of biological systems. Importantly, once the nanoparticles are injected into the blood, a protein corona will inevitably form on the surface. The protein corona creates a new biological identity which plays a vital role in mediating the bio-nano interaction and determining the ultimate results. Thus, it is essential to understand how the protein corona affects the delivery journey of nanoparticles in vivo and what we can do to exploit the protein corona for better delivery efficiency. In this review, we first summarize the fundamental impact of the protein corona on the delivery journey of nanoparticles. Next, we emphasize the strategies that have been developed for tailoring and exploiting the protein corona to improve the transportation behavior of nanoparticles in vivo. Finally, we highlight what we need to do as a next step towards better understanding and exploitation of the protein corona. We hope these insights into the "Yin and Yang" effect of the protein corona will have profound implications for understanding the role of the protein corona in a wide range of nanoparticles.

Recent developments in polynorepinephrine: an innovative material for bioinspired coatings and colloids

While applications of polydopamine (PDA) are exponentially growing, research concerning the closely related neurotransmitter derivative polynorepinephrine (PNE) is in paucity, even though norepinephrine shares dopamine's ability to self-polymerize and form a coating film that is nearly substrate-agnostic. In this review, we demonstrate that PNE can be used as an alternative to PDA with equal or ever superior performance. PNE offers a thinner and smoother coating surface and thus is capable of more effectively resisting fouling by biofoulants, enhancing cell adhesion capability, surface hydrophilicity and biomolecule immobilisation. With the abundance of catechol, amino and hydroxyl groups in PNE's structure, PNE can perform as an electron donor and receiver at the same time and initiate ring opening and redox reactions. It has also been shown that PNE has the potential to be used as a biosensor due to its bioconjugation and molecular recognition ability. Here, we summarise the applications of PNE to date and discuss its potential research directions in the near future.

The protein corona reduces the anticancer effect of graphene oxide in HER-2-positive cancer cells

In the last decade, graphene oxide (GO)-based nanomaterials have attracted much attention for their potential anti-cancer properties against various cancer cell types. However, while in vitro studies are promising, following in vivo investigations fail to show any relevant efficacy. Recent research has clarified that the wide gap between benchtop discoveries and clinical practice is due to our limited knowledge about the physical-chemical transformation of nanomaterials in vivo. In physiological environments, nanomaterials are quickly coated by a complex dress of biological molecules referred to as the protein corona. Mediating the interaction between the pristine material and the biological system the protein corona controls the mechanisms of action of nanomaterials up to the sub-cellular level. Here we investigate the anticancer ability of GO in SK-BR-3 human breast cancer cells over-expressing the human epidermal growth factor receptor 2 (HER-2), which is functionally implicated in the cell growth and proliferation through the activation of downstream pathways, including the PI3K/AKT/mTOR and MAPK/ERK signaling cascades. Western blot analysis demonstrated that GO treatment resulted in a marked decrease in total HER-2, associated with a down-regulation of the expression and activation of protein kinase B (AKT) and extracellular signal-regulated kinase (ERK) thus indicating that GO may act as a potent HER-2 inhibitor. On the other side, the protein corona reverted the effects of GO on HER-2 expression and molecular downstream events to the control level. Our findings may suggest a mechanistic explanation of the reduced anticancer properties of GO-based nanomaterials in vivo. These results may also represent a good prediction strategy for the anticancer activity of nanomaterials designed for biomedical purposes, reaffirming the necessity of exploring their effectiveness under physiologically relevant conditions before moving on to the next in vivo studies.

Selective detection of tartaric acid using amino acid interlinked silver nanoparticles as a colorimetric probe

A variety of biomolecules with different functional groups play critical roles in almost all the processes occurring in living cells. Interaction of metallic nanoparticles (NPs) with various biomolecules generates a layer of molecules on their surface, and this biomolecular rich layer formed on the NP surface is described as a "biomolecular corona". The physicochemical properties of the NPs, including size, adsorption affinity, and charge on the particles' surfaces are the major factors influencing the characteristics of this corona. The formation of various biomolecular corona has been studied well, whereas the amino acid corona is relatively new by exploring their stability. In the present study, a novel formation of an amino acid corona with a fundamental interaction mechanism for a selective detection procedure using a colorimetric platform has been proposed. Herein, amino acid-coated silver NPs (AgNPs) have been used as a template with spectroscopic (steady state UV-Vis, FTIR) and imaging (HR-TEM, DLS) techniques. Our findings demonstrated that among different amino acid coronas, glutathione (GSH) stabilized AgNPs show a rapid reaction with tartaric acid. The extent and thermodynamics of the formed complex between the GSH/AgNPs and tartaric acid have also been studied and this suggested that the complex formed is spontaneous and energy releasing in nature.

Protein coronas coating polymer-stabilized silver nanocolloids attenuate cytotoxicity with minor effects on antimicrobial performance

Silver nanoparticles are versatile platforms with a variety of applications in the biomedical field. In this framework, their presence in biological media inevitably leads to the interaction with proteins thus conducting to the formation of biomolecular coronas. This feature alters the identity of the nanomaterial and may affect many biological events. These considerations motivated the investigation of protein adsorption onto the surface of polymer-stabilized AgNPs. The metallic colloids were coated by polyethyleneimine (PEI), polyvinylpyrrolidone (PVP), and poly(2-vinyl pyridine)-b-poly(ethylene oxide) (PEO-b-P2VP), and nanoparticle-protein interaction was probed by using a library of analytical techniques. The experimental data revealed a higher extent of protein adsorption at the surface of AgNPs@PVP whereas PEO-b-P2VP coating conducted to the least amount. The main component of the protein coronas was evidenced to be bovine serum albumin (BSA), which is indeed the protein at the highest abundancy in the model biological media. We have further demonstrated reduced cytotoxicity of the silver colloids coated by biomolecular coronas as compared to the pristine counterparts. Nevertheless, the protein coatings did not notably reduce the antimicrobial performance of the polymer-stabilized AgNPs. Accordingly, although the protein-repelling property is frequently targeted towards longer in vivo circulation of nanoparticles, we herein underline that protein coatings, which are commonly treated as artifacts to be avoided, may indeed enhance the biological performance of nanomaterials. These findings are expected to be highly relevant in the design of polymer-stabilized metallic colloids intended to be used in healthcare.

Tuning the immune system by nanoparticle-biomolecular corona

Nanotechnology has a great potential to revolutionize the landscape of medicine, but an inadequate understanding of the nanomaterial-biological (nano-bio) interface hampers its ultimate clinical translation. Surface attachment of biomolecules provides a new biological identity of nanoparticles that plays a crucial role in vivo as it can activate the immune system triggering inflammatory responses, clearance from the body, and cellular toxicity. In this review, we summarize and critically analyze progress in understanding the relationship between the biological identity of nanoparticles and immune system activation. Accordingly, we discuss the implications of biomolecular corona on nanotoxicity, immune safety, and biocompatibility. We also highlight a perspective on engineering the biological identity of nanoparticles for modulating immunological responses.

Developmental neurotoxicity of silver nanoparticles: the current state of knowledge and future directions

The increasing production and use of silver nanoparticles (AgNPs) as an antimicrobial agent in an array of medical and commercial products, including those designed for infants and children, poses a substantial risk of exposure during the developmental period. This review summarizes current knowledge on developmental neurotoxicity of AgNPs in both pre- and post-natal stages with a focus on the biological specificity of immature organisms that predisposes them to neurotoxic insults as well as the molecular mechanisms underlying AgNP-induced neurotoxicity. The current review revealed that AgNPs increase the permeability of the blood-brain barrier (BBB) and selectively damage neurons in the brain of immature rats exposed pre and postnatally. Among the AgNP-induced molecular mechanisms underlying toxic insult is cellular stress, which can consequently lead to cell death. Glutamatergic neurons and NMDAR-mediated neurotransmission also appear to be a target for AgNPs during the postnatal period of exposure. Collected data indicate also that our current knowledge of the impact of AgNPs on the developing nervous system remains insufficient and further studies are required during different stages of development with investigation of environmentally-relevant doses of exposure.

A toxicological profile of silica nanoparticles

Humans are regularly exposed to silica nanoparticles in environmental and occupational contexts, and these exposures have been implicated in the onset of adverse health effects. Existing reviews on silica nanoparticle toxicity are few and not comprehensive. There are natural and synthetic sources by which crystalline and amorphous silica nanoparticles are produced. These processes influence physiochemical properties, which are factors that can dictate toxicological effects. Toxicological assessment includes exposure scenario (e.g. environmental, occupational), route of exposure, toxicokinetics, and toxicodynamics. Broader considerations include pathology, risk assessment, regulation, and treatment after injury. This review aims to consolidate the most relevant and up-to-date research in these areas to provide an exhaustive toxicological profile of silica nanoparticles.

Tumor-microenvironment triggered signal-to-noise boosting nanoprobes for NIR-IIb fluorescence imaging guided tumor surgery and NIR-II photothermal therapy

High quantum yield quantum dots (QDs) with the emission in the sub-second near infrared window (NIR-IIb, 1500-1700 nm) can afford higher resolution, a deeper penetration depth and zero auto-fluorescence for bio-imaging. However, low tumor accumulation, the rapid renal clearance and potential toxicity impeding their biomedical applications. Here, we report a tumor microenvironment responsive hollowed virus-bionic MnO2 nanoshell with IR1061 loading in the cavity and QDs (PbS@CdS) anchoring on the surface for precise NIR-IIb fluorescence imaging guided tumor surgery and efficient NIR-II photothermal therapy. This QDs based nanoprobe could efficiently adhere on tumor cells to realize efficient tumor tissue accumulation. NIR-IIb fluorescence of tumor margin could be successfully delineating after extracellular weak acid triggered MnO2 biodegradation for IR1061 release with remarkable NIR-IIb signal-to-noise boosting. Then, it could facilitate complete dissection of various tumor models with the assistance of NIR-IIb fluorescence imaging. Moreover, the fascinating efficacy for micro-metastasis eradication via NIR-II photothermal effects can be achieved under NIR-IIb fluorescence imaging guidance. Specifically, in combination with negligible system toxicity, our nanoprobes showed great potential as a versatile NIR-IIb fluorescent imaging platform for precise tumor surgery and tumor therapy guidance for future clinical translation.

Insights into the mapping of green synthesis conditions for ZnO nanoparticles and their toxicokinetics

Research on ZnO nanoparticles (NPs) has broad medical applications. However, the green synthesis of ZnO NPs involves a wide range of properties requiring optimization. ZnO NPs show toxicity at lower doses. This toxicity is a function of NP properties and pharmacokinetics. Moreover, NP toxicity and pharmacokinetics are affected by the species type and age of the animals tested. Physiologically based pharmacokinetic (PBPK) modeling offers a mechanistic platform to scrutinize the colligative effect of the interplay between these factors, which reduces the need for in vivo studies. This review provides a guide to choosing green synthesis conditions that result in minimal toxicity using a mechanistic tool, namely PBPK modeling.

Leaching of microplastic-associated additives in aquatic environments: A critical review

Microplastic pollution has attracted significant attention as an emerging global environmental problem. One of the most important issues with microplastics is the leaching of harmful additives. This review summarizes the recent advances in the understanding of the leaching phenomena in the context of the phase equilibrium between microplastics and water, and the release kinetics. Organic additives, which are widely used in plastic products, have been introduced because they have diverse physicochemical properties and mass fractions in plastics. Many theoretical and empirical models have been utilized in laboratory and field studies. However, the partition or distribution constant between microplastics and water (K_p) and the diffusivity of an additive in microplastics (D) are the two key properties explaining the leaching equilibrium and kinetics of hydrophobic organic additives. Because microplastics in aquatic environments undergo dynamic weathering, leaching of organic additives with high K_p and/or low D cannot be described by a leaching model that only considers microplastic and water phases with a fixed boundary. Surface modifications of microplastics as well as biofilms colonizing microplastic surfaces can alter the leaching equilibrium and kinetics and transform additives. Further studies on the release of hydrophobic organic additives and their transformation products under various conditions are required to extend our understanding of the environmental fate and transport of these additives in aquatic environments.

Protein corona alters the mechanisms of interaction between silica nanoparticles and lipid vesicles

The use of nanoparticles (NPs) for biomedical applications implies their delivery into the organism where they encounter biological fluids. In such biological fluids, proteins and other biomolecules adhere to the surface of the NPs forming a biomolecular corona that can alter significantly the behaviour of the nanomaterials. Here, we investigate the impact of a bovine serum albumin corona on interactions between silica nanoparticles (SNPs) of two different sizes and giant lipid vesicles. The formation of the protein corona leads to a significant increase of the hydrodynamic size of the SNPs. Confocal microscopy imaging shows that the protein corona alters the morphological response of vesicles to SNPs. In addition, Laurdan spectral imaging show that the protein corona weakens the effect of SNPs on the lipid packing in the GUV membrane. Our results demonstrate that a protein corona can change the interaction mechanism between nanoparticles and lipid membranes.

The effects of protein corona on in vivo fate of nanocarriers

With the emerging advances in utilizing nanocarriers for biomedical applications, a molecular-level understanding of the in vivo fate of nanocarriers is necessary. After administration into human fluids, nanocarriers can attract proteins onto their surfaces, forming an assembled adsorption layer called protein corona (PC). The formed PC can influence the physicochemical properties and subsequently determine nanocarriers' biological behaviors. Therefore, an in-depth understanding of the features and effects of the PC on the nanocarriers' surface is the first and most important step towards controlling their in vivo fate. This review introduces fundamental knowledge such as the definition, formation, composition, conformation, and characterization of the PC, emphasizing the in vivo environmental factors that control the PC formation. The effect of PC on the physicochemical properties and thus biological behaviors of nanocarriers was then presented and thoroughly discussed. Finally, we proposed the design strategies available for engineering PC onto nanocarriers to manipulate them with the desired surface properties and achieve the best biomedical outcomes.

Modulation of Pulmonary Toxicity in Metabolic Syndrome Due to Variations in Iron Oxide Nanoparticle-Biocorona Composition

Nanoparticles (NPs) interact with biomolecules by forming a biocorona (BC) on their surface after introduction into the body and alter cell interactions and toxicity. Metabolic syndrome (MetS) is a prevalent condition and enhances susceptibility to inhaled exposures. We hypothesize that distinct NP-biomolecule interactions occur in the lungs due to MetS resulting in the formation of unique NP-BCs contributing to enhanced toxicity. Bronchoalveolar lavage fluid (BALF) was collected from healthy and MetS mouse models and used to evaluate variations in the BC formation on 20 nm iron oxide (Fe₃O₄) NPs. Fe₃O₄ NPs without or with BCs were characterized for hydrodynamic size and zeta potential. Unique and differentially associated proteins and lipids with the Fe₃O₄ NPs were identified through proteomic and lipidomic analyses to evaluate BC alterations based on disease state. A mouse macrophage cell line was utilized to examine alterations in cell interactions and toxicity due to BCs. Exposures to 6.25, 12.5, 25, and 50 μg/mL of Fe₃O₄ NPs with BCs for 1 h or 24 h did not demonstrate overt cytotoxicity. Macrophages increasingly associated Fe₃O₄ NPs following addition of the MetS BC compared to the healthy BC. Macrophages exposed to Fe₃O₄ NPs with a MetS-BC for 1 h or 24 h at a concentration of 25 μg/mL demonstrated enhanced gene expression of inflammatory markers: CCL2, IL-6, and TNF-α compared to Fe₃O₄ NPs with a healthy BC. Western blot analysis revealed activation of STAT3, NF-κB, and ERK pathways due to the MetS-BC. Specifically, the Jak/Stat pathway was the most upregulated inflammatory pathway following exposure to NPs with a MetS BC. Overall, our study suggests the formation of distinct BCs due to NP exposure in MetS, which may contribute to exacerbated inflammatory effects and susceptibility.

Artificial engineering of the protein corona at bio-nano interfaces for improved cancer-targeted nanotherapy

Nanoparticles (NPs) have been demonstrated in numerous applications as anticancer, antibacterial and antioxidant agents. Artificial engineering of protein interactions with NPs in biological systems is crucial to develop potential NPs for drug delivery and cancer nanotherapy. The protein corona (PC) on the NP surface, displays an interface between biomacromolecules and NPs, governing their pharmacokinetics and pharmacodynamics. Upon interaction of proteins with the NP surface, their surface features are modified and they can easily be removed from the circulation by the mononuclear phagocytic system (MPS). PC properties heavily depend on the biological microenvironment and NP surface physicochemical parameters. Based on this context, we have surveyed different approaches that have been used for artificial engineering of the PC composition on NP surfaces. We discuss the effects of NP size, shape, surface modifications (PEGylation, self-peptide, other polymers), and protein pre-coating on the PC properties. Additionally, other factors including protein source and structure, intravenous injection and the subsequent shear flow, plasma protein gradients, temperature and local heat transfer, and washing media are considered in the context of their effects on the PC properties and overall target cellular effects. Moreover, the effects of NP-PC complexes on cancer cells based on cellular interactions, organization of intracellular PC (IPC), targeted drug delivery (TDD) and regulation of burst drug release profile of nanoplatforms, enhanced biocompatibility, and clinical applications were discussed followed by challenges and future perspective of the field. In conclusion, this paper can provide useful information to manipulate PC properties on the NP surface, thus trying to provide a literature survey to shorten their shipping from preclinical to clinical trials and to lay the basis for a personalized PC.

Application of non-metal nanoparticles, as a novel approach, for improving the stability of blood products: 2011-2021

Despite the importance of the proper quality of blood products for safe transfusion, conventional methods for preparation and their preservation, they lack significant stability. Non-metal nanoparticles with particular features may overcome these challenges. This review study for the first time provided a comprehensive vision of the interaction of non-metal nanoparticles with each blood product (red blood cells, platelets and plasma proteins). The findings of this review on the most effective nanoparticle for improving the stability of RBCs indicate that graphene quantum dots and nanodiamonds show compatibility with RBCs. For increasing the stability of platelet products, silica nanoparticles exhibited a suppressive impact on platelet aggregation. Pristine graphene also shows compatibility with platelets. For better stability of plasma products, graphene oxide was indicated to preserve free human serum albumin from thermal shocks at low ionic strength. For increased stability of Factor VIII, mesoporous silica nanoparticles with large pores exhibit the superb quality of recovered proteins. Furthermore, 3.2 nm quantum dots exhibited anticoagulant effects. As the best promising nanoparticles for immunoglobulin stability, graphene quantum dots showed compatibility with γ-globulins. Overall, this review recommends further research on the mentioned nanoparticles as the most potential candidates for enhancing the stability and storage of blood components.

Mineralized vectors for gene therapy

There is an intense interest in developing materials for safe and effective delivery of polynucleotides using non-viral vectors. Mineralization of organic templates has long been used to produce complex materials with outstanding biocompatibility. However, a lack of control over mineral growth has limited the applicability of mineralized materials to a few in vitro applications. With better control over mineral growth and surface functionalization, mineralized vectors have advanced significantly in recent years. Here, we review the recent progress in chemical synthesis, physicochemical properties, and applications of mineralized materials in gene therapy, focusing on structure-function relationships. We contrast the classical understanding of the mineralization mechanism with recent ideas of mineralization. A brief introduction to gene delivery is summarized, followed by a detailed survey of current mineralized vectors. The vectors derived from calcium phosphate are articulated and compared to other minerals with unique features. Advanced mineral vectors derived from templated mineralization and specialty coatings are critically analyzed. Mineral systems beyond the co-precipitation are explored as more complex multicomponent systems. Finally, we conclude with a perspective on the future of mineralized vectors by carefully demarcating the boundaries of our knowledge and highlighting ambiguous areas in mineralized vectors. STATEMENT OF SIGNIFICANCE: Therapy by gene-based medicines is increasingly utilized to cure diseases that are not alleviated by conventional drug therapy. Gene medicines, however, rely on macromolecular nucleic acids that are too large and too hydrophilic for cellular uptake. Without tailored materials, they are not functional for therapy. One emerging class of nucleic acid delivery system is mineral-based materials. The fact that they can undergo controlled dissolution with minimal footprint in biological systems are making them attractive for clinical use, where safety is utmost importance. In this submission, we will review the emerging synthesis technology and the range of new generation minerals for use in gene medicines.

Using GPCRs as Molecular Beacons to Target Ovarian Cancer with Nanomedicines

The five-year survival rate for women with ovarian cancer is very poor despite radical cytoreductive surgery and chemotherapy. Although most patients initially respond to platinum-based chemotherapy, the majority experience recurrence and ultimately develop chemoresistance, resulting in fatal outcomes. The current administration of cytotoxic compounds is hampered by dose-limiting severe adverse effects. There is an unmet clinical need for targeted drug delivery systems that transport chemotherapeutics selectively to tumor cells while minimizing off-target toxicity. G protein-coupled receptors (GPCRs) are the largest family of membrane receptors, and many are overexpressed in solid tumors, including ovarian cancer. This review summarizes the progress in engineered nanoparticle research for drug delivery for ovarian cancer and discusses the potential use of GPCRs as molecular entry points to deliver anti-cancer compounds into ovarian cancer cells. A newly emerging treatment paradigm could be the personalized design of nanomedicines on a case-by-case basis.

Reduced cytotoxicity of nanomaterials driven by nano-bio interactions: Case study of single protein coronas enveloping polymersomes

The protein adsorption onto poly(acrylic acid)-block-polystyrene (PAA₂₂-b-PS₁₄₄) polymersomes has been investigated with regard to structural features, thermodynamic aspects and biological consequences. The light scattering measurements revealed the formation of protein coronas enveloping the polymeric capsules regardless of the chemical nature of the biomacromolecules. The experiments were conducted by using lysozyme, immunoglobulin G - IgG and bovine serum albumin - BSA as model proteins due to their differences concerning size and residual surface charge at physiological pH. The protein adsorption was further confirmed by isothermal titration calorimetry, and the experimental data suggest that the phenomenon is mainly governed by hydrogen bonding and van der Waals interactions. The pre-existing protein layer via the pre-incubation in protein environments notably attenuates the cytotoxicity of the nanomaterial compared to the pristine counterparts. This approach can possibly be extended to different types of assemblies when intermolecular interactions are able to induce protein adsorption and the development of protein coronas around nanoparticles. Such fairly simple method may be convenient to engineer safer nanomaterials towards a variety of biomedical applications when the nanotoxicity is an issue. Additionally, the strategy can possibly be used to tailor the surface properties of nanoparticles by adsorbing specific proteins for targeting purposes.

Intracellular Trafficking and Distribution of Cd and InP Quantum Dots in HeLa and ML-1 Thyroid Cancer Cells

The study of the interaction of engineered nanoparticles, including quantum dots (QDs), with cellular constituents and the kinetics of their localization and transport, has provided new insights into their biological consequences in cancers and for the development of effective cancer therapies. The present study aims to elucidate the toxicity and intracellular transport kinetics of CdSe/ZnS and InP/ZnS QDs in late-stage ML-1 thyroid cancer using well-tested HeLa as a control. Our XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) viability assay (Cell Proliferation Kit II) showed that ML-1 cells and non-cancerous mouse fibroblast cells exhibit no viability defect in response to these QDs, whereas HeLa cell viability decreases. These results suggest that HeLa cells are more sensitive to the QDs compared to ML-1 cells. To test the possibility that transporting rates of QDs are different between HeLa and ML-1 cells, we performed a QD subcellular localization assay by determining Pearson’s Coefficient values and found that HeLa cells showed faster QDs transporting towards the lysosome. Consistently, the ICP-OES test showed the uptake of CdSe/ZnS QDs in HeLa cells was significantly higher than in ML-1 cells. Together, we conclude that high levels of toxicity in HeLa are positively correlated with the traffic rate of QDs in the treated cells.

Experimental and Computational Nanotoxicology-Complementary Approaches for Nanomaterial Hazard Assessment

The growing development and applications of nanomaterials lead to an increasing release of these materials in the environment. The adverse effects they may elicit on ecosystems or human health are not always fully characterized. Such potential toxicity must be carefully assessed with the underlying mechanisms elucidated. To that purpose, different approaches can be used. First, experimental toxicology consisting of conducting in vitro or in vivo experiments (including clinical studies) can be used to evaluate the nanomaterial hazard. It can rely on variable models (more or less complex), allowing the investigation of different biological endpoints. The respective advantages and limitations of in vitro and in vivo models are discussed as well as some issues associated with experimental nanotoxicology. Perspectives of future developments in the field are also proposed. Second, computational nanotoxicology, i.e., in silico approaches, can be used to predict nanomaterial toxicity. In this context, we describe the general principles, advantages, and limitations especially of quantitative structure–activity relationship (QSAR) models and grouping/read-across approaches. The aim of this review is to provide an overview of these different approaches based on examples and highlight their complementarity.