Multimaterial piezoelectric fibres

Diphenylalanine Peptide Nanotube Energy Harvesters

Piezoelectric materials are excellent generators of clean energy, as they can harvest the ubiquitous vibrational and mechanical forces. We developed large-scale unidirectionally polarized, aligned diphenylalanine (FF) nanotubes and fabricated peptide-based piezoelectric energy harvesters. We first used the meniscus-driven self-assembly process to fabricate horizontally aligned FF nanotubes. The FF nanotubes exhibit piezoelectric properties as well as unidirectional polarization. In addition, the asymmetric shapes of the self-assembled FF nanotubes enable them to effectively translate external axial forces into shear deformation to generate electrical energy. The fabricated peptide-based piezoelectric energy harvesters can generate voltage, current, and power of up to 2.8 V, 37.4 nA, and 8.2 nW, respectively, with 42 N of force, and can power multiple liquid-crystal display panels. These peptide-based energy-harvesting materials will provide a compatible energy source for biomedical applications in the future.

Stretchable Electrospun PVDF-HFP/Co-ZnO Nanofibers as Piezoelectric Nanogenerators

Herein, we investigate the morphology, structure and piezoelectric performances of neat polyvinylidene fluoride hexafluoropropylene (PVDF-HFP) and PVDF-HFP/Co-ZnO nanofibers, fabricated by electrospinning. An increase in the amount of crystalline β-phase of PVDF-HFP has been observed with the increase in Co-doped ZnO nanofiller concentration in the PVDF-HFP matrix. The dielectric constants of the neat PVDF-HFP and PVDF-HFP/2 wt.% Co-ZnO nanofibers are derived as 8 and 38 respectively. The flexible nanogenerator manipulated from the polymer nanocomposite (PVDF-HFP/Co-ZnO) exhibits an output voltage as high as 2.8 V compared with the neat PVDF-HFP sample (~120 mV). These results indicate that the investigated nanocomposite is appropriate for fabricating various flexible and wearable self-powered electrical devices and systems.

Pure OPM nanofibers with high piezoelectricity designed for energy harvesting in vitro and in vivo

Pure OPM nanofibers with unprecedented high piezoelectricity are successfully fabricated and applied on the skin as a motion sensor and in arterial blood vessels as a nanogenerator for energy harvesting.

Thermally-drawn fibers with spatially-selective porous domains

The control of mass transport using porous fibers is ubiquitous, with applications ranging from filtration to catalysis. Yet, to date, porous fibers have been made of single materials in simple geometries, with limited function. Here we report the fabrication and characterization of thermally drawn multimaterial fibers encompassing internal porous domains alongside non-porous insulating and conductive materials, in highly controlled device geometries. Our approach utilizes phase separation of a polymer solution during the preform-to-fiber drawing process, generating porosity as the fiber is drawn. Engineering the preform structure grants control over the geometry and materials architecture of the final porous fibers. Electrical conductivity of the selectrolyte-filled porous domains is substantiated through ionic conductivity measurements using electrodes thermally drawn in the cross-section. Pore size tunability between 500 nm–10 µm is established by regulating the phase separation kinetics. We further demonstrate capillary breakup of cylindrical porous structures porous microspheres within the fiber core.

Porous polymer fibers show great potential for a range of applications, but their simple structures typically limit their functionality. Here, the authors combine a thermal drawing process with polymer solution phase separation to fabricate porous multimaterial fibers with complex internal architectures.

Piezoelectric Microstructured Fibers via Drawing of Multimaterial Preforms

We demonstrate planar laminated piezoelectric generators and piezoelectric microstructured fibers based on BaTiO₃-polyvinylidene and carbon-loaded-polyethylene materials combinations. The laminated piezoelectric generators were assembled by sandwiching the electrospun BaTiO₃-polyvinylidene mat between two carbon-loaded-polyethylene films. The piezoelectric microstructured fiber was fabricated via drawing of the multilayer fiber preform, and features a swissroll geometry that have ~10 alternating piezoelectric and conductive layers. Both piezoelectric generators have excellent mechanical durability, and could retain their piezoelectric performance after 3 day’s cyclic bend-release tests. Compared to the laminated generators, the piezoelectric fibers are advantageous as they could be directly woven into large-area commercial fabrics. Potential applications of the proposed piezoelectric fibers include micro-power-generation and remote sensing in wearable, automotive and aerospace industries.

Wearable Contactless Respiration Sensor Based on Multi-Material Fibers Integrated into Textile

In this paper, we report on a novel sensor for the contactless monitoring of the respiration rate, made from multi-material fibers arranged in the form of spiral antenna (2.45 GHz central frequency). High flexibility of the used composite metal-glass-polymer fibers permits their integration into a cotton t-shirt without compromising comfort or restricting movement of the user. At the same time, change of the antenna geometry, due to the chest expansion and the displacement of the air volume in the lungs, is found to cause a significant shift of the antenna operational frequency, thus allowing respiration detection. In contrast with many current solutions, respiration is detected without attachment of the electrodes of any kind to the user’s body, neither direct contact of the fiber with the skin is required. Respiration patterns for two male volunteers were recorded with the help of a sensor prototype integrated into standard cotton t-shirt in sitting, standing, and lying scenarios. The typical measured frequency shift for the deep and shallow breathing was found to be in the range 120–200 MHz and 10–15 MHz, respectively. The same spiral fiber antenna is also shown to be suitable for short-range wireless communication, thus allowing respiration data transmission, for example, via the Bluetooth protocol, to mobile handheld devices.

Piezoelectric Micro- and Nanostructured Fibers Fabricated from Thermoplastic Nanocomposites Using a Fiber Drawing Technique: Comparative Study and Potential Applications

We report an all-polymer flexible piezoelectric fiber that uses both judiciously chosen geometry and advanced materials in order to enhance fiber piezoelectric response. The microstructured/nanostructured fiber features a soft hollow polycarbonate core surrounded by a spiral multilayer cladding consisting of alternating layers of piezoelectric nanocomposites (polyvinylidene enhanced with BaTiO₃, PZT, or CNT) and conductive polymer (carbon-filled polyethylene). The conductive polymer layers serve as two electrodes, and they also form two spatially offset electric connectors on the fiber surface designed for the ease of connectorization. Kilometer-long piezoelectric fibers of sub-millimeter diameters are thermally drawn from a macroscopic preform. The fibers exhibit high output voltage of up to 6 V under moderate bending, and they show excellent mechanical and electrical durability in a cyclic bend-release test. The micron/nanosize multilayer structure enhances in-fiber poling efficiency due to the small distance between the conducting electrodes sandwiching the piezoelectric composite layers. Additionally, the spiral structure greatly increases the active area of the piezoelectric composite, thus promoting higher voltage generation and resulting in 10-100 higher power generation efficiency over the existing piezoelectric cables. Finally, we weave the fabricated piezoelectric fibers into technical textiles and demonstrate their potential applications in power generation when used as a sound detector, smart car seat upholstery, or wearable materials.

Polymeric Nanofibers with Ultrahigh Piezoelectricity via Self-Orientation of Nanocrystals

Piezoelectricity in macromolecule polymers has been gaining immense attention, particularly for applications in biocompatible, implantable, and flexible electronic devices. This paper introduces core-shell-structured piezoelectric polyvinylidene fluoride (PVDF) nanofibers chemically wrapped by graphene oxide (GO) lamellae (PVDF/GO nanofibers), in which the polar β-phase nanocrystals are formed and uniaxially self-oriented by the synergistic effect of mechanical stretching, high-voltage alignment, and chemical interactions. The β-phase orientation of the PVDF/GO nanofibers along their axes is observed at atomic scale through high resolution transmission electron microscopy, and the β-phase content is found to be 88.5%. The piezoelectric properties of the PVDF/GO nanofibers are investigated in terms of piezoresponse mapping, local hysteresis loops, and polarization reversal by advanced piezoresponse force microscopy. The PVDF/GO nanofibers show a desirable out-of-plane piezoelectric constant (d₃₃) of -93.75 pm V^-1 (at 1.0 wt % GO addition), which is 426% higher than that of the conventional pure PVDF nanofibers. The mechanism behind this dramatic enhancement in piezoelectricity is elucidated by three-dimensional molecular modeling.

Machine-Washable Textile Triboelectric Nanogenerators for Effective Human Respiratory Monitoring through Loom Weaving of Metallic Yarns

Textile triboelectric nanogenerators for human respiratory monitoring with machine washability are developed through loom weaving of Cu-PET and PI-Cu-PET yarns. Triboelectric charges are generated at the yarn crisscross intersections to achieve a maximum short circuit current density of 15.50 mA m^-2 . By integrating into a chest strap, human respiratory rate and depth can be monitored.

Self-assembled fibre optoelectronics with discrete translational symmetry

Fibres with electronic and photonic properties are essential building blocks for functional fabrics with system level attributes. The scalability of thermal fibre drawing approach offers access to large device quantities, while constraining the devices to be translational symmetric. Lifting this symmetry to create discrete devices in fibres will increase their utility. Here, we draw, from a macroscopic preform, fibres that have three parallel internal non-contacting continuous domains; a semiconducting glass between two conductors. We then heat the fibre and generate a capillary fluid instability, resulting in the selective transformation of the cylindrical semiconducting domain into discrete spheres while keeping the conductive domains unchanged. The cylindrical-to-spherical expansion bridges the continuous conducting domains to create ∼10⁴ self-assembled, electrically contacted and entirely packaged discrete spherical devices per metre of fibre. The photodetection and Mie resonance dependent response are measured by illuminating the fibre while connecting its ends to an electrical readout.

The thermal-draw technique offers fibre devices with a multiplicity of geometries, but these are constrainted to being translationally symmetric. Here, the authors disrupt this symmetry by applying selective capillary instability, resulting in electrically connected spherical photodetecting elements.

Shear Piezoelectricity in Poly(vinylidenefluoride-co-trifluoroethylene): Full Piezotensor Coefficients by Molecular Modeling, Biaxial Transverse Response, and Use in Suspended Energy-Harvesting Nanostructures

The intrinsic flexible character of polymeric materials causes remarkable strain deformations along directions perpendicular to the applied stress. The biaxial response in the shear piezoelectricity of polyvinylidenefluoride copolymers is analyzed and their full piezoelectric tensors are provided. The microscopic shear is exploited in single suspended nanowires bent by localized loading to couple flexural deformation and transverse piezoelectric response.

Silver metaphosphate glass wires inside silica fibers--a new approach for hybrid optical fibers

Phosphate glasses represent promising candidates for next-generation photonic devices due to their unique characteristics, such as vastly tunable optical properties, and high rare earth solubility. Here we show that silver metaphosphate wires with bulk optical properties and diameters as small as 2 µm can be integrated into silica fibers using pressure-assisted melt filling. By analyzing two types of hybrid metaphosphate-silica fibers, we show that the filled metaphosphate glass has only negligible higher attenuation and a refractive index that is identical to the bulk material. The presented results pave the way towards new fiber-type optical devices relying on metaphosphate glasses, which are promising materials for applications in nonlinear optics, sensing and spectral filtering.

Thermo-electromechanical Behavior of Piezoelectric Nanofibers

High performance piezoelectric devices based on arrays of PVDF-TrFE nanofibers have been introduced in the literature for a variety of applications including energy harvesting and sensing. In this Research Article, we utilize uniaxial tensile test on arrays of nanofibers, microtensile, and nanoindentation and piezo-response force microscopy (PFM) on individual nanofibers, as wells as DSC, XRD, and FTIR spectroscopy to investigate the effect of annealing on microstructure, mechanical, and piezoelectric properties of arrays and individual electrospun nanofibers. For PVDF-TrFE nanofibers annealing in a temperature between the Curie and melting temperature (in paraelectric phase) results in ∼70% increase in crystallinity of the nanofibers. The findings of our multiscale experiments reveal that this improvement in crystallinity results in ∼3-fold increase in elastic modulus, and ∼55% improvement in piezoelectric constant. Meanwhile, the ductility and tensile toughness of the nanofibers drop by ∼1 order of magnitude. In addition, nanoscale cracks were observed on the surface of the annealed nanofibers; however, they did not result in significant change in the strength of the nanofibers. The results of this work may have important implications for applications of PVDF-TrFE in energy harvesting, biomedical, and sensor areas.

3D fiber-based hybrid nanogenerator for energy harvesting and as a self-powered pressure sensor

In the past years, scientists have shown that development of a power suit is no longer a dream by integrating the piezoelectric nanogenerator (PENG) or triboelectric nanogenerator (TENG) with commercial carbon fiber cloth. However, there is still no design applying those two kinds of NG together to collect the mechanical energy more efficiently. In this paper, we demonstrate a fiber-based hybrid nanogenerator (FBHNG) composed of TENG and PENG to collect the mechanical energy in the environment. The FBHNG is three-dimensional and can harvest the energy from all directions. The TENG is positioned in the core and covered with PENG as a coaxial core/shell structure. The PENG design here not only enhances the collection efficiency of mechanical energy by a single carbon fiber but also generates electric output when the TENG is not working. We also show the potential that the FBHNG can be weaved into a smart cloth to harvest the mechanical energy from human motions and act as a self-powered strain sensor. The instantaneous output power density of TENG and PENG can achieve 42.6 and 10.2 mW/m(2), respectively. And the rectified output of FBHNG has been applied to charge the commercial capacitor and drive light-emitting diodes, which are also designed as a self-powered alert system.

Spontaneous high piezoelectricity in poly(vinylidene fluoride) nanoribbons produced by iterative thermal size reduction technique

We produced kilometer-long, endlessly parallel, spontaneously piezoelectric and thermally stable poly(vinylidene fluoride) (PVDF) micro- and nanoribbons using iterative size reduction technique based on thermal fiber drawing. Because of high stress and temperature used in thermal drawing process, we obtained spontaneously polar γ phase PVDF micro- and nanoribbons without electrical poling process. On the basis of X-ray diffraction (XRD) analysis, we observed that PVDF micro- and nanoribbons are thermally stable and conserve the polar γ phase even after being exposed to heat treatment above the melting point of PVDF. Phase transition mechanism is investigated and explained using ab initio calculations. We measured an average effective piezoelectric constant as -58.5 pm/V from a single PVDF nanoribbon using a piezo evaluation system along with an atomic force microscope. PVDF nanoribbons are promising structures for constructing devices such as highly efficient energy generators, large area pressure sensors, artificial muscle and skin, due to the unique geometry and extended lengths, high polar phase content, high thermal stability and high piezoelectric coefficient. We demonstrated two proof of principle devices for energy harvesting and sensing applications with a 60 V open circuit peak voltage and 10 μA peak short-circuit current output.

Ferroelectric mechanism of croconic acid: a first-principles and Monte Carlo study

The ferroelectric mechanism of croconic acid in terms of the electronic structure and the molecular structure was studied by first principles using the density functional theory with the generalized gradient approximation. The spontaneous polarization (Ps) was simulated by the Berry phase method. It is found that the large polarization originates from charge transfer due to the strong "push-pull" effect of electron-releasing and -withdrawing groups along the hydrogen bond. According to the characteristics of polarization of croconic acid, we constructed a one-dimensional ferroelectric Hamiltonian model to describe the ferroelectric properties of croconic acid. Based on the Hamiltonian model, the thermal properties of the ferroelectricity of croconic acid were studied by Monte Carlo method. The simulated Curie temperature is 756 K, and the spontaneous polarization keeps well temperature range stability up to 400 K. These results are in good agreement with the experimental data.

Janus-core and shell microfibers

Janus microcylinders composed of different polymers were prepared through coaxial co-jetting with dual-core flows, followed by cross-linking, microsectioning, and shell removal. Uniquely shaped building blocks can be fabricated by photo-patterning of one hemisphere of the microcylinders.

Direct atomic-level observation and chemical analysis of ZnSe synthesized by in situ high-throughput reactive fiber drawing

We demonstrate a high-throughput method for synthesizing zinc selenide (ZnSe) in situ during fiber drawing. Central to this method is a thermally activated chemical reaction occurring across multiple interfaces between alternately layered elemental zinc- (Zn-) and selenium- (Se-) rich films embedded in a preform and drawn into meters of fiber at a temperature well below the melting temperature of either Zn or ZnSe. By depositing 50 nm thick layers of Zn interleaved between 1 μm thick Se layers, a controlled breakup of the Zn sheet is achieved, thereby enabling a complete and controlled chemical reaction. The thermodynamics and kinetics of this synthesis process are studied using thermogravimetric analysis and differential scanning calorimetry, and the in-fiber compound is analyzed by a multiplicity of materials characterization tools, including transmission electron microscopy, Raman microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction, all resulting in unambiguous identification of ZnSe as the compound produced from the reactive fiber draw. Furthermore, we characterize the in-fiber ZnSe/Se97S3 heterojunction to demonstrate the prospect of ZnSe-based fiber optoelectronic devices. The ability to synthesize new compounds during fiber drawing at nanometer scale precision and to characterize them at the atomic-level extends the architecture and materials selection compatible with multimaterial fiber drawing, thus paving the way toward more complex and sophisticated functionality.

Piezoelectric fibers for conformal acoustics

Ultrasound transducers have many important applications in medical, industrial, and environmental settings. Large-active-area piezoelectric fibers are presented here, which can be woven into extended and flexible ultrasound transducing fabrics. This work opens significant opportunities for large-area, flexible and adjustable acoustic emission and sensing for a variety of emerging applications.

Development and Application of Piezoelectric Materials for Ultrasound Generation and Detection

The piezoelectric effect and its converse are the primary means used in biomedical ultrasound for converting acoustical energy into electrical energy and vice versa. Piezoelectricity has found many bioengineering applications ranging from ultrasound imaging and therapeutics, to piezoelectric surgery and microelectromechanical systems, and to biomedical implants with associated energy harvesting. Because of its fundamental importance to the proper functioning of most medical ultrasound systems, it is important to gain a general understanding of the effect, the history of its development and from this, an appreciation of its limitations and advantages in the generation and detection of ultrasound. This article describes the historical evolvement associated with its use in relation to most medical ultrasound applications and is intended to serve as an introduction for non-expert readers.

Polyester textile functionalization through incorporation of pH/thermo-responsive microgels. Part II: polyester functionalization and characterization

A new approach to functionalize the surface of polyester textiles is described in this study. Functionalization was achieved by incorporating pH/temperature-responsive polyelectrolyte microgels into the textile surface layer using UV irradiation. The aim of functionalization was to regulate polyester wettability according to ambient conditions by imparting stimuli-responsiveness from the microgel to the textile itself. Microgels consisted of pH/thermo-responsive microparticles of poly(N-isopropylacrylamide-co-acrylic acid) either alone or complexed with the pH-responsive natural polysaccharide chitosan. Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy, ζ-potential measurements, and topographical analysis were used for surface characterization. Wettability of polyester textiles was assessed by dynamic wetting, water vapor transfer, and moisture regain measurements. One of the main findings showed that the polyester surface was rendered pH-responsive, both in acidic and alkaline pH region, owing to the microgel incorporation. With a marked relaxation in their structure and an increase in their microporosity, the functionalized textiles exhibited higher water vapor transfer rates both at 20 and 40 °C, and 65% relative humidity compared with the reference polyester. Also, at 40 °C, i.e., above the microgel Lower Critical Solution Temperature, the functionalized polyester textiles had lower moisture regains than the reference. Finally, the type of the incorporated microgel affected significantly the polyester total absorption times, with an up to 300% increase in one case and an up to 80% decrease in another case. These findings are promising for the development of functional textile materials with possible applications in biotechnology, technical, and protective clothing.

Exploration of in-fiber nanostructures from capillary instability

A new class of multi-material fiber that incorporates micrometer-thickness concentric-cylindrical sheets of glass into polymer matrix has emerged. The ultimate lower limit of feature size and recent observation of interesting instability phenomenon in fiber system motivate us to examine fluid instabilities during the complicated thermal drawing fabrication processing. In this paper, from the perspective of a single instability mechanism, classical Plateau-Rayleigh instabilities in the form of radial fluctuation, we explore the stability of various microstructures (such as shells and filaments) in our composite fibers. The attained uniform structures are consistent with theoretical analysis. Furthermore, a viscous materials map is established from calculations and agrees well with various identified materials. These results not only shed insights into other forms of fluid instabilities, but also provide guidance to achieve more diverse nanostructures (such as filaments, wires, and particles) in the microstructured fibers.

Arrays of indefinitely long uniform nanowires and nanotubes

Nanowires are arguably the most studied nanomaterial model to make functional devices and arrays. Although there is remarkable maturity in the chemical synthesis of complex nanowire structures, their integration and interfacing to macro systems with high yields and repeatability still require elaborate aligning, positioning and interfacing and post-synthesis techniques. Top-down fabrication methods for nanowire production, such as lithography and electrospinning, have not enjoyed comparable growth. Here we report a new thermal size-reduction process to produce well-ordered, globally oriented, indefinitely long nanowire and nanotube arrays with different materials. The new technique involves iterative co-drawing of hermetically sealed multimaterials in compatible polymer matrices similar to fibre drawing. Globally oriented, endlessly parallel, axially and radially uniform semiconducting and piezoelectric nanowire and nanotube arrays hundreds of metres long, with nanowire diameters less than 15 nm, are obtained. The resulting nanostructures are sealed inside a flexible substrate, facilitating the handling of and electrical contacting to the nanowires. Inexpensive, high-throughput, multimaterial nanowire arrays pave the way for applications including nanowire-based large-area flexible sensor platforms, phase-changememory, nanostructure-enhanced photovoltaics, semiconductor nanophotonics, dielectric metamaterials,linear and nonlinear photonics and nanowire-enabled high-performance composites.

Air/Liquid-pressure and heartbeat-driven flexible fiber nanogenerators as a micro/nano-power source or diagnostic sensor

We present a new approach for fabricating flexible fiber nanogenerators (FNGs) that can be used for smart shirts, flexible electronics, and medical applications. These FNGs are based on carbon fibers that are covered cylindrically by textured zinc oxide (ZnO) thin films. Once subjected to uni-compression by applying a pressure, the cylindrical ZnO thin film is under a compressive strain, resulting in a macroscopic piezopotential across its inner and exterior surfaces owing to the textured structure of the film, which is the driving force for generating an electric current in the external load. Using such a structure, an output peak voltage of 3.2 V and average current density of 0.15 μA cm(-2) are demonstrated. The FNGs rely on air pressure, so that it can work in a non-contact mode in cases of rotating tires, flowing air/liquid, and even in blood vessels. Pressure-driven FNGs added to a syringe show potential to harvest energy in blood vessels, gas pipes, and oil pipes, as long as there is a fluctuation in pressure (or turbulence). Heart-pulse driven FNGs can serve as ultrasensitive sensors for monitoring the behavior of the human heart, which may possibly be applied to medical diagnostics as sensors and measurement tools.

Resolving optical illumination distributions along an axially symmetric photodetecting fiber

Photodetecting fibers of arbitrary length with internal metal, semiconductor and insulator domains have recently been demonstrated. These semiconductor devices exhibit a continuous translational symmetry which presents challenges to the extraction of spatially resolved information. Here, we overcome this seemingly fundamental limitation and achieve the detection and spatial localization of a single incident optical beam at sub-centimeter resolution, along a one-meter fiber section. Using an approach that breaks the axial symmetry through the constuction of a convex electrical potential along the fiber axis, we demonstrate the full reconstruction of an arbitrary rectangular optical wave profile. Finally, the localization of up to three points of illumination simultaneously incident on a photodetecting fiber is achieved.