Obtaining information about protein secondary structures in aqueous solution using Fourier transform IR spectroscopy

High-strength and ultra-tough supramolecular polyamide spider silk fibers assembled via specific covalent and reversible hydrogen bonds

Achieving ultra-high tensile strength and exceptional toughness is a longstanding goal for structural materials. However, previous attempts using covalent and non-covalent bonds have failed, leading to the belief that these two properties are mutually exclusive. Consequently, commercial fibers have been forced to compromise between tensile strength and toughness, as seen in the differences between nylon and Kevlar. To address this challenge, we drew inspiration from the disparate tensile strength and toughness of nylon and Kevlar, both of which are polyamide fibers, and developed an innovative approach that combines specific intermolecular disulfide bonds and reversible hydrogen bonds to create ultra-strong and ultra-tough polyamide spider silk fibers. Our resulting Supramolecular polyamide spider silk, which has a maximum molecular weight of 1084 kDa, exhibits high tensile strength (1180 MPa) and extraordinary toughness (433 MJ/m3), surpassing Kevlar's toughness 8-fold. This breakthrough presents a new opportunity for the sustainable development of spider silk as an environmentally friendly alternative to synthetic commercial fibers, as spider silk is composed of amino acids. Future research could explore the use of these techniques and fundamental knowledge to develop other super materials in various mechanical fields, with the potential to improve people's lives in many ways. STATEMENT OF SIGNIFICANCE: • By emulating synthetic commercial fibers such as nylon and polyethylene, we have successfully produced supramolecular-weight polyamide spider silk fibers with a molecular weight of 1084 kDa through a unique covalent bond-mediated linear polymerization reaction of spider silk protein molecules. This greatly surpasses the previous record of a maximum molecular weight of 556 kDa. • We obtained supramolecular polyamide spider silk fibers with both high-tensile strength and toughness. The stress at break is 1180 MPa, and the toughness is 8 times that of kevlar, reaching 433 MJ/m3. • Our results challenge the notion that it is impossible to manufacture fibers with both ultra-high tensile strength and ultra-toughness, and provide theoretical guidance for developing environmentally friendly and sustainable structural materials that meet industrial needs.

Hydrogen bioelectrogeneration with pH-resilient and oxygen-tolerant cobalt apoenzyme-saccharide

Hydrogenases are enzymes that catalyze the reversible conversion of protons to hydrogen gas, using earth-abundant metals such as nickel and/or iron. This characteristic makes them promising for sustainable energy applications, particularly in clean hydrogen production. However, their widespread use faces challenges, including a limited pH range and susceptibility to oxygen. In response to these issues, SacCoMyo is introduced as an artificial enzyme. SacCoMyo is designed by replacing the native metal in the myoglobin (Myo) scaffold with a hydroxocobalamin (Co) porphyrin core and complemented by a protective heteropolysaccharide-linked (Sac) shell. This engineered protein proves to be resilient, maintaining robust functionality even in acidic environments and preventing denaturation in a pH 1 electrolyte. The cobalt porphyrin core of SacCoMyo reduces the activation overpotential for hydrogen generation. A high turnover frequency of about 2400 H2 s-1 is demonstrated in the presence of molecular oxygen, showcasing its potential in biohydrogen production and its ability to overcome the limitations associated with natural hydrogenases.

Impact of Choline Hydroxide-Supported Magnetic Nanoparticles on Peroxidase Activity and Conformational Stability of Cytochrome c

Nanotechnology has advanced significantly; however, little is known about the potential implications on human health-related issues, particularly blood carrying enzymes. Ionic liquids are also well-recognized for maintaining the structure and activity of enzymes. In this regard, we delineate a facile synthetic approach of preparation of Fe3O4 nanoparticles (NPs) as well as choline hydroxide [CH][OH] ionic liquid (IL)-supported Fe3O4 NPs (Fe3O4-CHOH). This approach of combining magnetic nanoparticles (MNPs) with IL results in distinctive properties, which may offer enormous utility in the field of biomedical research due to the effortless separation of MNPs by an external magnetic field. Detailed characterization of MNPs including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) was carried out. The biomolecular interactions of Fe3O4 and Fe3O4-CHOH NPs with cytochrome c (Cyt c) were studied in detail using various spectroscopic and microscopic techniques. From spectroscopic studies, it can be concluded that the secondary structure of Cyt c is more stable in the presence of Fe3O4-CHOH NPs than Fe3O4 NPs. The binding constant of Cyt c in the presence of MNPs was also calculated using the Benesi-Hildebrand equation. Furthermore, dynamic light scattering (DLS), ζ-potential, and microscopic studies were performed to study the interaction of Cyt c with MNPs. These studies provided evidence favoring the formation of bionanoconjugates of Cyt c with MNPs. Moreover, the enzymatic activity of Cyt c increases in the presence of both MNPs. The peroxidase activity of Cyt c in MNPs explicitly elucidates that the enzyme is preserved for a long time in the presence of Fe3O4-CHOH NPs. Later on, TEM and field emission scanning electron microscopy (FESEM) were also performed to gather more information regarding the morphology of Cyt c in the presence of MNPs.

Conjugation of lesser mealworm (Alphitobius diaperinus) larvae protein with polyphenols for the development of innovative antioxidant emulsifiers

Lesser mealworm protein concentrate (LMPC) was conjugated with chlorogenic acid (CA) or tannic acid (TA) using an alkaline method. The impact of polyphenol type and concentration on the physicochemical and structural characteristics, antioxidant, interfacial, and emulsifying properties of the LMPC-polyphenol conjugates were investigated. Under the conditions tested, TA demonstrated higher affinity for LMPC compared to CA. The conjugation of LMPC induced conformational changes as showed by intrinsic fluorescence and FT-MIR raw spectra analysis. The surface hydrophobicity of the conjugates was reduced, leading to increased interfacial tension values for LMPC-TA conjugates without impairment of the emulsifying activity. The antioxidant properties were significantly improved by the conjugation. Flaxseed oil-in-water (O/W) emulsions stabilized by the conjugates and LMPC remained physically stable for 12 days at 50 °C with a notable reduction of secondary oxidation products when conjugates were used. LMPC-TA and LMPC-CA exhibited potential to be used as novel antioxidant emulsifiers in O/W emulsions.

Membrane-specific and calcium-dependent binding of the Arabidopsis C2 domain protein CaLB revealed by ATR-FTIR spectroscopy

C2 domain-containing proteins bind to cellular membranes and mediate diverse cellular processes. Although many of these membrane-interacting proteins have been identified, the molecular mechanisms of protein-membrane interactions and conformational dynamics are often poorly understood and remain to be investigated with appropriate methods. Here, we used attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy and biomimetic membrane systems to analyse CalB, a yet uncharacterized Arabidopsis C2 domain protein. We studied membrane binding, lipid specificity and calcium dependency with solid-supported lipid membranes (SSLB) and small unilamellar lipid vesicles (SUVs). Membranes were composed of pure POPC lipids or of POPC/PI(3)P lipid mixtures. A significantly increased protein binding affinity was observed with membranes containing 1% PI(3)P indicating the high binding specificity of CaLB for PI(3)P. Furthermore, membrane binding occurs in a calcium-dependent manner with a higher calcium concentration increasing the binding of CaLB to the POPC/PI(3)P membrane. Secondary structure analysis of IR-spectra reveals that only minor conformational changes take place upon binding with a slight increase in the helical and disordered regions of CaLB.

Effect of a novel drying method based on supercritical carbon dioxide on the physicochemical properties of sorghum proteins

The aim of this research was to use supercritical carbon dioxide (SC-CO2) drying as a novel approach for generating sorghum protein concentrates/isolates with enhanced functional properties. Sorghum protein extracts were obtained from white whole-grain sorghum flour and were dried by two methods, namely, freeze-drying and SC-CO2 drying. The collected proteins were characterized for their morphology, color, crystallinity, surface hydrophobicity, emulsifying activity index (EAI), creaming index (CI), foaming capacity (FC), foaming stability (FS), protein solubility, chemical interactions, and viscosity. The SC-CO2-dried proteins exhibited higher porosity compared to the freeze-dried ones with smaller particle sizes (∼5.1 vs. 0.4 μm, respectively). The XRD patterns indicated that the SC-CO2-dried proteins had a lower crystallinity than the freeze-dried proteins. However, the surface hydrophobicities of the freeze-dried and SC-CO2-dried proteins were similar. The EAI results showed that the emulsifying activity of freeze-dried protein powder (40.6) was better than that of SC-CO2-dried protein powder (29.8). Nevertheless, the solubility of SC-CO2-dried proteins was higher than that of freeze-dried proteins in most of the pHs investigated. Overall, the proposed SC-CO2 drying method has the potential to generate porous protein powders with improved solubility that can be used in developing functional foods.

Three Stages of Dynamic Assembly Process of Dipeptide-Based Supramolecular Gel Revealed by In Situ Infrared Spectroscopy

The exploration of short peptide-based assembly is vital for understanding protein-misfolding-associated diseases and seeking strategies to attenuate aggregate formation. While, the molecular mechanism of their structural evolution remains poorly studied in view of the dynamic and unpredictable assembly process. Herein, infrared (IR) spectroscopy, which serves as an in situ and real-time analytical technique, was intelligently employed to investigate the mechanism of phase transition and aggregate formation during the dynamic assembly process of diphenylalanine. Combined with other spectroscopy and electron microscopy technologies, three stages of gel formation and the main driving forces in different stages were revealed. A variety of stoichiometric methods such as continuous wavelet transform, principal component analysis, and two-dimensional correlation spectroscopy techniques were conducted to analyze the original time-dependent IR spectra to obtain detailed information on the changes in the amide bands and hydration layer. The microenvironment of hydrogen bonding among amide bands was significantly changed with the addition of pyridine derivatives, resulting in great differences in the properties of co-assembled gels. This work not only provides a universal analytical way to reveal the dynamic assembly process of dipeptide-based supramolecular gel but also expands their applications in supramolecular regulation and high-throughput screens in situ.

Improved encapsulation effect and structural properties of whey protein isolate by dielectric barrier discharge cold plasma

The whey protein isolate (WPI) was modified by dielectric barrier discharge cold plasma (DBD) in order to improve its encapsulation efficiency of rutin. In this work, the effect of DBD treatment on structure and physicochemical properties of WPI and the interaction between DBD-treated WPI and rutin were investigated. The results showed that the structural change of WPI leaded to the exposure of internal hydrophobic groups, increasing the interaction site with rutin. The encapsulation efficiency of DBD-treated WPI (30 kV, 30 s) on rutin was improved by 12.42 % compared with control group. The results of multispectral analysis showed that static quenching occurred in the process of interaction between DBD-treated and rutin, hydrogen bond and van der Waals force were the main forces between them. Therefore, DBD treatment can be used as a method to improve the encapsulation efficiency of WPI on hydrophobic active substances.

Effect of pH-shifting on the water holding capacity and gelation properties of mung bean protein isolate

In this study, alkaline pH-shifting modified the globular structure of mung bean protein isolate (MBPI) to form flexible and stretched structures. In contrast, acidic pH-shifting increased the rigidity of MBPI. The increased flexibility (at the level of the secondary structure) and newly exposed intermolecular amino acid groups induced by alkaline pH-shifting improved the water holding capacity and gelation properties of proteins. Specifically, MBPI treated at pH 12 (MP12) showed the most flexible structure and highest water holding capacity and gel formation properties (least gelation concentration). The water-holding capacity of native MBPI increased from 1.56 g/g to 4.81 g/g, and its least gelation concentration decreased from 22 % to 15 % by pH-shifting at pH 12. Furthermore, MP12 formed stronger and more elastic heat-induced gels than native MBPI. We identified significant differences in the structural properties and water holding capacity, and gelation properties of acidic and alkaline pH-shifted MBPI and investigated the gelation properties of MP12 including rheological and morphological analyses. Our findings can facilitate the use of mung beans as a protein source in a wide range of food applications, including plant-based and processed meats.

Artificial Intelligence-based Amide-II Infrared Spectroscopy Simulation for Monitoring Protein Hydrogen Bonding Dynamics

The structurally sensitive amide II infrared (IR) bands of proteins provide valuable information about the hydrogen bonding of protein secondary structures, which is crucial for understanding protein dynamics and associated functions. However, deciphering protein structures from experimental amide II spectra relies on time-consuming quantum chemical calculations on tens of thousands of representative configurations in solvent water. Currently, the accurate simulation of amide II spectra for whole proteins remains a challenge. Here, we present a machine learning (ML)-based protocol designed to efficiently simulate the amide II IR spectra of various proteins with an accuracy comparable to experimental results. This protocol stands out as a cost-effective and efficient alternative for studying protein dynamics, including the identification of secondary structures and monitoring the dynamics of protein hydrogen bonding under different pH conditions and during protein folding process. Our method provides a valuable tool in the field of protein research, focusing on the study of dynamic properties of proteins, especially those related to hydrogen bonding, using amide II IR spectroscopy.

Advancements in Mid-Infrared spectroscopy of extracellular vesicles

Extracellular vesicles (EVs) are lipid vesicles secreted by all cells into the extracellular space and act as nanosized biological messengers among cells. They carry a specific molecular cargo, composed of lipids, proteins, nucleic acids, and carbohydrates, which reflects the state of their parent cells. Due to their remarkable structural and compositional heterogeneity, characterizing EVs, particularly from a biochemical perspective, presents complex challenges. In this context, mid-infrared (IR) spectroscopy is emerging as a valuable tool, providing researchers with a comprehensive and label-free spectral fingerprint of EVs in terms of their specific molecular content. This review aims to provide an up-to-date critical overview of the major advancements in mid-IR spectroscopy of extracellular vesicles, encompassing both fundamental and applied research achievements. We also systematically emphasize the new possibilities offered by the integration of emerging cutting-edge IR technologies, such as tip-enhanced and surface-enhanced spectroscopy approaches, along with the growing use of machine learning for data analysis and spectral interpretation. Additionally, to assist researchers in navigating this intricate subject, our manuscript includes a wide and detailed collection of the spectral peaks that have been assigned to EV molecular constituents up to now in the literature.

Peptides with Charged Amino Acids Mitigate nZnO-Induced Growth Inhibition of Lactobacillus rhamnosus LRa05

Growing concern is about the potential side effects of nanomaterials from food packaging, notably zinc oxide nanoparticles (nZnO). Previous research revealed that walnut-derived peptides could mitigate this inhibitory effect, but the mechanism involved is unclear. Here, we found that not all peptides have such an effect. Based on the growth inhibition model of Lactobacillus rhamnosus LRa05 induced by nZnO, we assessed the protective effects of various peptides. Notably, four peptides containing charged amino acids (PPKNW, WPPKN, ADIYTE, and WEREEQE) were found to effectively alleviate the growth inhibition phenomenon. We hypothesize that the peptide-nZnO interaction modifies this effect, as confirmed through infrared, Raman, and fluorescence spectroscopy. Our results highlight amide bonds, amino groups, carboxyl groups, and benzene rings as key peptide binding sites on nZnO, with static quenching primarily due to hydrogen bonds and van der Waals forces. This study elucidates peptide characteristics in nZnO interactions, facilitating a deeper exploration of food matrix-nanocomposite interactions.

Phase-Dependent Adsorption of Myelin Basic Protein to Phosphatidylcholine Lipid Bilayers

The dense packing of opposite cytoplasmic surfaces of the lipid-enriched myelin membrane, responsible for the proper saltatory conduction of nerve impulses through axons, is ensured by the adhesive properties of myelin basic protein (MBP). Although preferentially interacting with negatively charged phosphatidylserine (PS) lipids, as an intrinsically disordered protein, it can easily adapt its shape to its immediate environment and thus adsorb to domains made of zwitterionic phosphatidylcholine (PC) lipids. As the molecular-level interaction pattern between MBP and PC lipid membranes suffers from scarce characterization, an experimental and computational study of multilamellar liposomes (MLVs) composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in the presence of bovine MBP is presented here. Calorimetric and temperature-dependent UV-Vis measurements identified DPPC pretransition temperature (Tp) and calorimetric enthalpy (ΔHcal) as the physicochemical parameters most responsive to the presence of MBP. Besides suggesting an increase in β-sheet fractions of structured MBP segments as DPPC lipids undergo from the gel (20 °C) to the fluid (50 °C) phase, FTIR spectra unraveled the significant contribution of lysine (Lys) residues in the adsorption pattern, especially when DPPC is in the fluid (50 °C) phase. In addition to highlighting the importance of Lys residues in the MBP adsorption on DPPC lipid bilayer, employing salt bridges (SBs) and hydrogen bonds (HBs), MD data suggest the crucial importance of the orientation of MBP with respect to the surface of the DPPC lipid bilayer.

A disposable optofluidic micro-transmission cell with tailorable length for Fourier-transform infrared spectroscopy of biological fluids

Mid-infrared Fourier-transform infrared (FT-IR) spectroscopy of liquid biological samples is limited by the high absorption of water in this spectral range, which makes conventional transmission cuvettes unsuitable as their centimeter-scale length is already too big. The most common alternative relies on the use of attenuated total reflection (ATR) accessories, which provide a small interaction path length for light along the interface between the analyte and the expensive ATR crystals. In this work, we address this issue by proposing a disposable and low-cost micro-transmission cell. Its construction relies on a simple technique, which consists of dispersing plastic spherical microparticles in a liquid sample before dispensing it between two pieces of silicon assembled one onto the other and acting as windows for the cell. Consequently, the microparticles act as a spacer of very precise height in-between the two silicon windows. This technique allows easy construction of infrared absorption cells with near-optimum optical interaction path length just by selecting the most appropriate particle size. The concept is demonstrated by measuring the concentration of glucose in aqueous solutions using microspheres of diameter 20 μm then 40 μm and analyzing the corresponding glucose absorption peaks in the wavenumber range 950-1200 cm-1. The performance is compared to that of standard ATR spectroscopy of the same samples. This resulted in a root-mean-square error of cross-validation (RMSECV) of 58.8 mg dl-1 as obtained for transmission measurements by partial least squares (PLS) regression, which is comparable to the RMSECV of 53 mg dl-1 for single-reflection diamond ATR measurements.

Spectroscopic Analysis of the Effect of Ibuprofen Degradation Products on the Interaction between Ibuprofen and Human Serum Albumin

BACKGROUND

Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) are one of the most commonly used groups of medicinal compounds in the world. The wide access to NSAIDs and the various ways of storing them due to their easy accessibility often entail the problem with the stability and durability resulting from the exposure of drugs to external factors. The aim of the research was to evaluate in vitro the mechanism of competition between ibuprofen (IBU) and its degradation products, i.e., 4'-isobutylacetophenone (IBAP) and (2RS)-2-(4- formylphenyl)propionic acid (FPPA) during transport in a complex with fatted (HSA) and defatted (dHSA) human serum albumin.

METHODS

The research was carried out using spectroscopic techniques, such as spectrophotometry, infrared spectroscopy and nuclear magnetic resonance spectroscopy.

RESULTS

The comprehensive application of spectroscopic techniques allowed, among others, for the determination of the binding constant, the number of classes of binding sites and the cooperativeness constant of the analyzed systems IBU-(d)HSA, IBU-(d)HSA-FPPA, IBU-(d)HSA-IBAP; the determination of the effect of ibuprofen and its degradation products on the secondary structure of albumin; identification and assessment of interactions between ligand and albumin; assessment of the impact of the presence of fatty acids in the structure of albumin and the measurement temperature on the binding of IBU, IBAP and FPPA to (d)HSA.

CONCLUSION

The conducted research allowed us to conclude that the presence of ibuprofen degradation products and the increase in their concentration significantly affect the formation of the IBU-albumin complex and thus, the value of the association constant of the drug, changing the concentration of its free fraction in the blood plasma. It was also found that the presence of an ibuprofen degradation product in a complex with albumin affects its secondary structure.

FTIR Spectroscopy and Blood-Derived Extracellular Vesicles Duo in Alzheimer's Disease

Background

Alzheimer's disease (AD) diagnosis is difficult, and new accurate tools based on peripheral biofluids are urgently needed. Extracellular vesicles (EVs) emerged as a valuable source of biomarker profiles for AD, since their cargo is disease-specific and these can be easily isolated from easily accessible biofluids, as blood. Fourier Transform Infrared (FTIR) spectroscopy can be employed to analyze EVs and obtain the spectroscopic profiles from different regions of the spectra, simultaneously characterizing carbohydrates, nucleic acids, proteins, and lipids.

Objective

The aim of this study was to identify blood-derived EVs (bdEVs) spectroscopic signatures with AD discriminatory potential.

Methods

Herein, FTIR spectra of bdEVs from two biofluids (serum and plasma) and distinct sets of Controls and AD cases were acquired, and EVs' spectra analyzed.

Results

Analysis of bdEVs second derivative peaks area revealed differences between Controls and AD cases in distinct spectra regions, assigned to carbohydrates and nucleic acids, amides, and lipids.

Conclusions

EVs' spectroscopic profiles presented AD discriminatory value, supporting the use of bdEVs combined with FTIR as a screening or complementary tool for AD diagnosis.

Pluronic F127 "nanoarmor" for stabilization of Cowpea mosaic virus immunotherapy

Our lab demonstrated that intratumoral Cowpea mosaic virus (CPMV) is a potent antitumor immunotherapy when used as in situ vaccine. As we pave the way for human clinical translation, formulation chemistry needs to be optimized for long-term storage of the drug candidate. In this work, CPMV was nanoengineered with Pluronic F127 to realize liquid and gel formulations which mitigate structural changes and RNA release during long-term storage. We evaluated the CPMV-F127 formulations for their stability and biological activity through a combination of in vitro assays and efficacy in vivo using a B16F10 murine melanoma model. Results demonstrate that both F127 liquid and gel formulations preserve CPMV structure and function following extended periods of thermal incubation at 4°C, 25°C, and 37°C. Heat-incubated CPMV without formulation resulted in structural changes and inferior in vivo efficacy. In stark contrast, in vivo efficacy was preserved when CPMV was formulated and protected with the F127 "nanoarmor."

Time-resolved vibrational dynamics: Novel opportunities for sensing and imaging

The evolution of time-resolved spectroscopies has resulted in significant advancements across numerous scientific disciplines, particularly those concerned with molecular electronic states. However, the intricacy of molecular vibrational spectroscopies, which provide comprehensive molecular-level information within complex structures, has presented considerable challenges due to the ultrashort dephasing time. Over recent decades, an increasing focus has been placed on exploring the temporal progression of bond vibrations, thereby facilitating an improved understanding of energy redistribution within and between molecules. This review article focuses on an array of time-resolved detection methodologies, each distinguished by unique technological attributes that offer exclusive capabilities for investigating the physical phenomena propelled by molecular vibrational dynamics. In summary, time-resolved vibrational spectroscopy emerges as a potent instrument for deciphering the dynamic behavior of molecules. Its potential for driving future progress across fields as diverse as biology and materials science is substantial, marking a promising future for this innovative tool.

Advancement of microfluidic modulation spectroscopy as a highly sensitive protein characterization technique for the detection of small structural changes

The higher order structure (HOS) of a protein is vital to its function and activity, making it a critical component in the development of protein-based therapeutics. Characterization of HOS can be performed using various biophysical techniques, but many of these methods have limitations such as low throughput, complicated workflow, narrow concentration range, and low sensitivity. Microfluidic Modulation Spectroscopy (MMS) is an emerging technology that addresses these limitations, offering high sensitivity and automated analysis for protein secondary structure. This study evaluates and compares the different well plate formats and scan modes of two MMS instruments. The newer Apollo system features a high throughput 96-well plate format and sweep scan mode that allows a 50% reduction in sample volume consumption and measurement time compared to the previous system. By measuring two proteins with drastically different secondary structures, the results demonstrated that the measurements were highly repeatable (>99% repeatability by area of overlap) regardless of the well plate formats or the scan modes. The limit of quantitation (LOQ) for determining structural impurity using the sweep scan mode was 3.2% and significantly better than that of FTIR at 23% from previous studies. This work highlighted the advancement of MMS as a highly sensitive technique to detect small changes of protein structures due to aggregation or misfolding.

Protocol for determining protein dynamics using FT-IR spectroscopy

In biological systems, protein function depends on spatial and temporal changes known as protein dynamics, which can be probed by amide hydrogen/deuterium (H/D) exchange. Here, we present a protocol for determining protein dynamics by Fourier-transform infrared (FT-IR) spectroscopy. We describe steps for protein sample preparation and FT-IR spectra collection. We then detail procedures for spectra analysis. Applications include the effects of protein mutation or protein and metal ion or ligand interactions on the protein H/D exchange rate. For complete details on the use and execution of this protocol, please refer to Yu et al. (2013).1.

Influence of the Sequence Motive Repeating Number on Protein Folding in Spider Silk Protein Films

Like multiblock copolymers, spider silk proteins are built of repetitive sequence motives. One prominent repetitive motif is based on the consensus sequence of spidroin 4 of the spider Araneus diadematus ADF4. The number x of the repeating sequence motives (C) determines the molecular weight of the recombinant ADF4-based, engineered spider silk protein denoted as eADF4(Cx). eADF4(Cx) can be used as a model for intrinsically disordered proteins (IDP) and to elucidate their folding. Herein, the influence of the variation of the sequence motive repeating number x (x = 1, 2, 4, 8, 16) on the protein folding within eADF4(Cx) films was investigated. eADF4(Cx) films were cast from 1,1,1,3,3,3-hexafluoropropan-2-ol (HFIP) solutions onto planar silicon model substrates, revealing mainly helical or random coil structure. Upon treatment with methanol vapor (ptm), the formation of crystalline β-sheets was triggered. Dichroic Fourier-transform infrared (FTIR) spectroscopy, circular dichroism, spectroscopic ellipsometry, atomic force microscopy, grazing-incidence small-angle X-ray scattering (GISAXS), grazing-incidence wide-angle X-ray scattering (GIWAXS), and electrokinetic and contact angle measurements were used to get information concerning the secondary structure and folding kinetics, orientation of β-sheets, the ratio of parallel/antiparallel β-sheets, domain sizes and distributions, surface topography, surface potential, hydrophobicity and the film integrity under water. Significant differences in the final β-sheet content, the share of antiparallel β-sheet structures, film integrity, surface potential, and isoelectric points between eADF4(Cx) with x = 1, 2 and eADF4(Cx) with x = 4, 8, 16 gave new insights in the molecular weight-dependent structure formation and film properties of IDP systems. GISAXS and kinetic measurements confirmed a relation between β-sheet crystal growth rate and final β-sheet crystal size. Further, competing effects of reduced diffusibility hindering accelerated crystal growth and enhanced backfolding promoting accelerated crystal growth with increasing molecular weight were discussed.

Single Infrared Spectrum Enables Simultaneous Identification of (Bio)Chemical Nature and Particle Size of Microorganisms and Synthetic Microplastic Beads

Populations of nearly identical chemical and biological microparticles include the synthetic microbeads used in cosmetic, biomedical, agri-food, and pharmaceutical industries as well as the class of living microorganisms such as yeast, pollen, and biological cells. Herein, we identify simultaneously the size and chemical nature of spherical microparticle populations with diameters larger than 1 μm. Our analysis relies on the extraction of both physical and chemical signatures from the same optical spectrum recorded using attenuated total reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy. These signatures are the spectral resonances caused by the microparticles, which depend on their size and the absorption peaks revealing their chemical nature. We validate the method first on separated and mixed groups of spherical microplastic particles of two different diameters, where the method is used to calculate the diameter of the microspherical particles. Then, we apply the method to correctly identify and measure the diameter of Saccharomyces cerevisiae yeast cells. Theoretical simulations to help in understanding the effect of size distribution and dispersion support our results.

Artificial Peptide-Protein Necrosomes Promote Cell Death

The presence of disordered region or large interacting surface within proteins significantly challenges the development of targeted drugs, commonly known as the "undruggable" issue. Here, we report a heterogeneous peptide-protein assembling strategy to selectively phosphorylate proteins, thereby activating the necroptotic signaling pathway and promoting cell necroptosis. Inspired by the structures of natural necrosomes formed by receptor interacting protein kinases (RIPK) 1 and 3, the kinase-biomimetic peptides are rationally designed by incorporating natural or D -amino acids, or connecting D -amino acids in a retro-inverso (DRI) manner, leading to one RIPK3-biomimetic peptide PR3 and three RIPK1-biomimetic peptides. Individual peptides undergo self-assembly into nanofibrils, whereas mixing RIPK1-biomimetic peptides with PR3 accelerates and enhances assembly of PR3. In particular, RIPK1-biomimetic peptide DRI-PR1 exhibits reliable binding affinity with protein RIPK3, resulting in specific cytotoxicity to colon cancer cells that overexpress RIPK3. Mechanistic studies reveal the increased phosphorylation of RIPK3 induced by RIPK1-biomimetic peptides, elucidating the activation of the necroptotic signaling pathway responsible for cell death without an obvious increase in secretion of inflammatory cytokines. Our findings highlight the potential of peptide-protein hybrid aggregation as a promising approach to address the "undruggable" issue and provide alternative strategies for overcoming cancer resistance in the future.

Indirect measurement of infrared absorption spectrum through thermal emission of meta-cavity array

Controlling thermal emission is essential for various infrared spectroscopy applications. Metasurfaces can be utilized to control multiple degrees of freedom of thermal emission, enabling the compact thermal emission materials and devices. Infrared spectroscopy such as FTIR (Fourier transform infrared spectroscopy), usually requires external infrared radiation source and complex spectroscopic devices for absorption spectrum measurement, which hinders the implementation of integrated compact and portable measurement equipment. Measuring absorption spectrum through the thermal emission of pixelated thermal emitter array can facilitate the integration and miniaturization of measurement setup, which is highly demanded for on-chip spectroscopy applications. Here, we experimentally demonstrate an integrated technology that allows for indirect measurement of the absorption spectrum through the thermal emission of meta-cavity array. This indirect measurement method opens a new avenue for compact infrared spectroscopy analysis.

Nanocellulose aerogels as 3D amyloid templates

Proteins in solution tend to coat solid surfaces upon exposure. Depending on the nature of the surface, the environmental conditions, and the nature of the protein these adsorbed proteins may self-assemble into ordered, fibre-like structures called amyloids. Nanoparticulate surfaces, with their high surface to volume ratio, are particularly favourable to amyloid formation. Most prior research has focussed on either inorganic or organic nanoparticles in solution. In this research, we instead focus on aerogels created from TEMPO-oxidized cellulose nanofibers (TO-CNF) to serve as bio-based, three-dimensional amyloid templates with a tuneable surface chemistry. Previous research on the use of cellulose as a protein adsorption template has shown no evidence of a change in the secondary protein structure. Herein, however, with the aid of the reducing agent TCEP, we were able to induce the formation of amyloid-like 'worms' on the surface of TO-CNF aerogels. Furthermore, we demonstrate that the addition of the TO-CNF aerogel can also induce bulk aggregation under conditions where it previously did not exist. Finally, we show that the addition of the aerogel increases the rate of 'worm' formation in conditions where previous research has found a long lag-phase. Therefore, TO-CNF aerogels are shown to be excellent templates for inducing ordered protein aggregation.

Effects of solvent extracted organic matter from outdoor air pollution on human type II pneumocytes: Molecular and proteomic analysis

Outdoor air pollution is responsible for the exacerbation of respiratory diseases in humans. Particulate matter with an aerodynamic diameter ≤2.5 μm (PM2.5) is one of the main components of outdoor air pollution, and solvent extracted organic matter (SEOM) is adsorbed to the main PM2.5 core. Some of the biological effects of black carbon and polycyclic aromatic hydrocarbons, which are components of PM2.5, are known, but the response of respiratory cell lineages to SEOM exposure has not been described until now. The aim of this study was to obtain SEOM from PM2.5 and analyze the molecular and proteomic effects on human type II pneumocytes. PM2.5 was collected from Mexico City in the wildfire season and the SEOM was characterized to be exposed on human type II pneumocytes. The effects were compared with benzo [a] pyrene (B[a]P) and hydrogen peroxide (H2O2). The results showed that SEOM induced a decrease in surfactant and deregulation in the molecular protein and lipid pattern analyzed by reflection-Fourier transform infrared (ATR-FTIR) spectroscopy on human type II pneumocytes after 24 h. The molecular alterations induced by SEOM were not shared by those induced by B[a]P nor H2O2, which highlights specific SEOM effects. In addition, proteomic patterns by quantitative MS analysis revealed a downregulation of 171 proteins and upregulation of 134 proteins analyzed in the STRING database. The deregulation was associated with positive regulation of apoptotic clearance, removal of superoxide radicals, and positive regulation of heterotypic cell-cell adhesion processes, while ATP metabolism, nucleotide process, and cellular metabolism were also affected. Through this study, we conclude that SEOM extracted from PM2.5 exerts alterations in molecular patterns of protein and lipids, surfactant expression, and deregulation of metabolic pathways of type II pneumocytes after 24 h of exposure in absence of cytotoxicity, which warns about apparent SEOM silent effects.

Curcumin Reduces Amyloid Beta Oligomer Interactions with Anionic Membranes

Many neurodegenerative diseases involve amyloidogenic proteins forming surface-bound aggregates on anionic membranes, and the peptide amyloid β (Aβ) in Alzheimer's disease is one prominent example of this. Curcumin is a small polyphenolic molecule that provides an interesting opportunity to understand the fundamental mechanisms of membrane-mediated aggregation because it embeds into membranes to alter their structure while also altering Aβ aggregation in an aqueous environment. The purpose of this work was to understand interactions among curcumin, β-sheet-rich Aβ fibrillar oligomers (FO), and a model anionic membrane. From a combination of liquid surface X-ray scattering experiments and molecular dynamics simulations, we found that curcumin embedded into an anionic 1,2-dimyristoyl-sn-glycero-3-phosphorylglycerol (DMPG) membrane to rest between the lipid headgroups and the tails, causing disorder and membrane thinning. FO accumulation on the membrane was reduced by ∼66% in the presence of curcumin, likely influenced by membrane thinning. Simulation results suggested curcumin clusters near exposed phenylalanine residues on a membrane-embedded FO structure. Altogether, curcumin inhibited FO interactions with a DMPG membrane, likely through a combination of altered membrane structure and interactions with the FO surface. This work elucidates the mechanism of curcumin as a small molecule that inhibits amyloidogenesis through a combination of both membrane and protein interactions.

CLIP-Seq analysis enables the design of protective ribosomal RNA bait oligonucleotides against C9ORF72 ALS/FTD poly-GR pathophysiology

Amyotrophic lateral sclerosis and frontotemporal dementia patients with a hexanucleotide repeat expansion in C9ORF72 (C9-HRE) accumulate poly-GR and poly-PR aggregates. The pathogenicity of these arginine-rich dipeptide repeats (R-DPRs) is thought to be driven by their propensity to bind low-complexity domains of multivalent proteins. However, the ability of R-DPRs to bind native RNA and the significance of this interaction remain unclear. Here, we used computational and experimental approaches to characterize the physicochemical properties of R-DPRs and their interaction with RNA. We find that poly-GR predominantly binds ribosomal RNA (rRNA) in cells and exhibits an interaction that is predicted to be energetically stronger than that for associated ribosomal proteins. Critically, modified rRNA "bait" oligonucleotides restore poly-GR-associated ribosomal deficits and ameliorate poly-GR toxicity in patient neurons and Drosophila models. Our work strengthens the hypothesis that ribosomal function is impaired by R-DPRs, highlights a role for direct rRNA binding in mediating ribosomal dysfunction, and presents a strategy for protecting against C9-HRE pathophysiological mechanisms.

Single-detector double-beam modulation for high-sensitivity infrared spectroscopy

Balanced detection based on double beams is widely used to reduce common-mode noises, such as laser intensity fluctuation and irregular wavelength scanning, in absorption spectroscopy. However, employing an additional detector can increase the total system noise due to added non-negligible thermal noise of the detector, particularly with mid-infrared (IR) detectors. Herein, we demonstrate a new optical method based on double-beam modulation (DBM) that uses a single-element detector but keeps the advantage of double-beam balanced detection. The sample and reference path beams were modulated out-of-phase with each other at a high frequency, and their average and difference signals were measured by two lock-in amplifiers and converted into absorbance. DBM was coupled with our previously reported solvent absorption compensation (SAC) method to eliminate the IR absorption contribution of water in aqueous solutions. The DBM-SAC method enabled us to acquire IR absorption spectra of bovine serum albumin solutions down to 0.02 mg/mL. We investigated the noise characteristics of DBM measurements when the wavelength was either fixed or scanned. The results demonstrate that DBM can lower the limit of detection by ten times compared to the non-modulation method.

Multiphasic Coacervates Assembled by Hydrogen Bonding and Hydrophobic Interactions

Coacervation has emerged as a prevalent mechanism to compartmentalize biomolecules in living cells. Synthetic coacervates help in understanding the assembly process and mimic the functions of biological coacervates as simplified artificial systems. Though the molecular mechanism and mesoscopic properties of coacervates formed from charged coacervates have been well investigated, the details of the assembly and stabilization of nonionic coacervates remain largely unknown. Here, we describe a library of coacervate-forming polyesteramides and show that the water-tertiary amide bridging hydrogen bonds and hydrophobic interactions stabilize these nonionic, single-component coacervates. Analogous to intracellular biological coacervates, these coacervates exhibit "liquid-like" features with low viscosity and low interfacial energy, and form coacervates with as few as five repeating units. By controlling the temperature and engineering the molar ratio between hydrophobic interaction sites and bridging hydrogen bonding sites, we demonstrate the tuneability of the viscosity and interfacial tension of polyesteramide-based coacervates. Taking advantage of the differences in the mesoscopic properties of these nonionic coacervates, we engineered multiphasic coacervates with core-shell architectures similar to those of intracellular biological coacervates, such as nucleoli and stress granule-p-body complexes. The multiphasic structures produced from these synthetic nonionic polyesteramide coacervates may serve as a valuable tool for investigating physicochemical principles deployed by living cells to spatiotemporally control cargo partitioning, biochemical reaction rates, and interorganellar signal transport.

Metabolic Fingerprinting for the Diagnosis of Clinically Similar Long COVID and Fibromyalgia Using a Portable FT-MIR Spectroscopic Combined with Chemometrics

Post Acute Sequelae of SARS-CoV-2 infection (PASC or Long COVID) is characterized by lingering symptomatology post-initial COVID-19 illness that is often debilitating. It is seen in up to 30-40% of individuals post-infection. Patients with Long COVID (LC) suffer from dysautonomia, malaise, fatigue, and pain, amongst a multitude of other symptoms. Fibromyalgia (FM) is a chronic musculoskeletal pain disorder that often leads to functional disability and severe impairment of quality of life. LC and FM share several clinical features, including pain that often makes them indistinguishable. The aim of this study is to develop a metabolic fingerprinting approach using portable Fourier-transform mid-infrared (FT-MIR) spectroscopic techniques to diagnose clinically similar LC and FM. Blood samples were obtained from LC (n = 50) and FM (n = 50) patients and stored on conventional bloodspot protein saver cards. A semi-permeable membrane filtration approach was used to extract the blood samples, and spectral data were collected using a portable FT-MIR spectrometer. Through the deconvolution analysis of the spectral data, a distinct spectral marker at 1565 cm-1 was identified based on a statistically significant analysis, only present in FM patients. This IR band has been linked to the presence of side chains of glutamate. An OPLS-DA algorithm created using the spectral region 1500 to 1700 cm-1 enabled the classification of the spectra into their corresponding classes (Rcv > 0.96) with 100% accuracy and specificity. This high-throughput approach allows unique metabolic signatures associated with LC and FM to be identified, allowing these conditions to be distinguished and implemented for in-clinic diagnostics, which is crucial to guide future therapeutic approaches.

Intermolecular interactions underlie protein/peptide phase separation irrespective of sequence and structure at crowded milieu

Liquid-liquid phase separation (LLPS) has emerged as a crucial biological phenomenon underlying the sequestration of macromolecules (such as proteins and nucleic acids) into membraneless organelles in cells. Unstructured and intrinsically disordered domains are known to facilitate multivalent interactions driving protein LLPS. We hypothesized that LLPS could be an intrinsic property of proteins/polypeptides but with distinct phase regimes irrespective of their sequence and structure. To examine this, we studied many (a total of 23) proteins/polypeptides with different structures and sequences for LLPS study in the presence and absence of molecular crowder, polyethylene glycol (PEG-8000). We showed that all proteins and even highly charged polypeptides (under study) can undergo liquid condensate formation, however with different phase regimes and intermolecular interactions. We further demonstrated that electrostatic, hydrophobic, and H-bonding or a combination of such intermolecular interactions plays a crucial role in individual protein/peptide LLPS.

Charge-induced low-temperature gelation of mixed proteins and the effect of pH on the gelation: A spectroscopic, rheological and coarse-grained molecular dynamics study

We report the gelation of mixed proteins consisting of oppositely charged lysozyme and serum albumins at various pH. The results from rheological tests showed that at a pH of 7, the gelation temperature (Tgel) of the oppositely charged proteins was lower than the melting temperature (Tm) of the individual protein. To ascertain the conformational state of the proteins at the observed Tgel, the attenuated total-reflectance Fourier-transform infrared (ATR-FTIR) spectra of the proteins were acquired. The recorded spectra showed that the proteins were predominantly alpha helical, suggesting that the observed gelation was electrostatically triggered. However, as the solution pH was changed to acid or alkaline regime, all the proteins became similarly charged and showed Tgel < Tm which was attributed to pH-induced denaturation. Surprisingly, however, the serum albumins were remarkably stable at the alkaline pH of 9 and 10 but very labile at the acidic pH. In contrast, the LYZ was more stable at the acidic than alkaline pH. To understand the role of the opposite charges in the gelation, coarse-grained molecular dynamics (CGMD) simulations revealed an increase in the aggregation of the oppositely charged proteins compared with the pure or similarly charged protein mixture.

D2O as an Imperfect Replacement for H2O: Problem or Opportunity for Protein Research?

D2O is commonly used as a solvent instead of H2O in spectroscopic studies of proteins, in particular, in infrared and nuclear-magnetic-resonance spectroscopy. D2O is chemically equivalent to H2O, and the differences, particularly in hydrogen-bond strength, are often ignored. However, replacing solvent water with D2O can affect not only the kinetics but also the structure and stability of biomolecules. Recent experiments have shown that even the mesoscopic structures and the elastic properties of biomolecular assemblies, such as amyloids and protein networks, can be very different in D2O and H2O. We discuss these findings, which probably are just the tip of the iceberg, and which seem to call for obtaining a better understanding of the H2O/D2O-isotope effect on water-water and water-protein interactions. Such improved understanding may change the differences between H2O and D2O as biomolecular solvents from an elephant in the room to an opportunity for protein research.

Molecular Evidence of Structural Changes in Silk Using Unlimited Degradation Mass Spectrometry

Proteomics has important uses in archeological science because it can distinguish species, reveal the evolution of paleontology, and provide biological evidence of historical events. However, this technique still has full potential in the study of silk aging mechanisms. In this work, we propose a strategy combining unlimited degradation with mass-spectrometry-based proteomics techniques, which interpret protein fragmentation propensity and secondary structure changes by detecting content changes of specific peptide groups in complex proteomes. This approach was employed to study the conformational changes in silk microscopic crystals after heat treatment. Combining conventional mechanics and crystallographic characterization, a thermal aging degradation mechanism model was proposed. At the same time, it explained the interesting problem that the crystallinity remained unchanged, but the mechanical properties decreased significantly. Focusing on the unlimited degradation process, this method will be widely applicable to the study of silk and wool aging processes and regenerated silk fibroin.

Inverted transflection spectroscopy of live cells using metallic grating on elevated nanopillars

Water absorption of mid-infrared (MIR) radiation severely limits the options for vibrational spectroscopy of the analytes - including live biological cells - that must be probed in aqueous environments. While internal reflection elements, such as attenuated total reflection prisms and metasurfaces, partially overcome this limitation, such devices have their own limitations: high cost, incompatibility with standard cell culture workflows, limited spectral range, and small penetration depth into the analyte. In this work, we introduce an alternative live cell biosensing platform based on metallic nanogratings fabricated atop elevated dielectric pillars. For the MIR wavelengths that are significantly longer than the grating period, reflection-based spectroscopy enables broadband sensing of the analytes inside the trenches separating the dielectric pillars. Because the depth of the analyte twice-traversed by the MIR light excludes the highly absorbing thick water layer above the grating, we refer to the technique as Inverted Transflection Spectroscopy (ITS). We demonstrate the analytic power of ITS by measuring protein concentrations in solution. The ability of ITS to interrogate live cells that naturally wrap themselves around the grating is also exploited to characterize their adhesion kinetics.

Study of the interfacial viscoelasticity of human serum albumin microcapsules using a viscoelasto-electrohydrodynamic technique

Crosslinked proteins are widely used as the encapsulating membranes in microcapsules for many biomedical and food industries. The interfacial rheological properties of these capsules are due to the complex microstructure of cross-linked globular proteins owing to structural changes at quaternary, tertiary and secondary levels. These changes in structure can be induced by high protein concentration, hydrophobic-hydrophillic interfaces, and pH. In this work, the interfacial viscoelastic rheological properties of human serum albumin (HSA) microcapsules are estimated using a novel electrodeformation technique exhibiting creep and oscillatory responses. Insights into the microstructure-rheology relationship are obtained using FTIR and SEM studies. The results show a complex dependence of the interfacial properties on the size, concentration and pH of the capsules. An interplay of inter-molecular interactions, adsorption and multilayer formation, accessibility to reactive functional groups, and dependence on the relative content of alpha helix, beta sheet and beta turn is observed. The interfacial rheological properties are estimated using the Burger model and creep is found to sensitively affect the rheological properties due to irreversible changes in microstructure. Furthermore, the electrodeformation technique allows analysis of interfacial rheology at high frequencies, 10 Hz to 1 kHz, which is otherwise not easily possible with conventional rheometers.

Biomineralization in Barnacle Base Plate in Association with Adhesive Cement Protein

Barnacles strongly attach to various underwater substrates by depositing and curing a proteinaceous cement that forms a permanent adhesive layer. The protein MrCP20 present within the calcareous base plate of the acorn barnacle Megabalanus rosa (M. rosa) was investigated for its role in regulating biomineralization and growth of the barnacle base plate, as well as the influence of the mineral on the protein structure and corresponding functional role. Calcium carbonate (CaCO3) growth on gold surfaces modified by 11-mercaptoundecanoic acid (MUA/Au) with or without the protein was followed using quartz crystal microbalance with dissipation monitoring (QCM-D), and the grown crystal polymorph was identified by Raman spectroscopy. It is found that MrCP20 either in solution or on the surface affects the kinetics of nucleation and growth of crystals and stabilizes the metastable vaterite polymorph of CaCO3. A comparative study of mass uptake calculated by applying the Sauerbrey equation to the QCM-D data and quantitative X-ray photoelectron spectroscopy determined that the final surface density of the crystals as well as the crystallization kinetics are influenced by MrCP20. In addition, polarization modulation infrared reflection-absorption spectroscopy of MrCP20 established that, during crystal growth, the content of β-sheet structures in MrCP20 increases, in line with the formation of amyloid-like fibrils. The results provide insights into the molecular mechanisms by which MrCP20 regulates the biomineralization of the barnacle base plate, while favoring fibril formation, which is advantageous for other functional roles such as adhesion and cohesion.

Proteolytically Stable Diaza-Peptide Foldamers Mimic Helical Hot Spots of Protein-Protein Interactions and Act as Natural Chaperones

A novel class of peptidomimetic foldamers based on diaza-peptide units are reported. Circular dichroism, attenuated total reflection -Fourier transform infrared, NMR, and molecular dynamics studies demonstrate that unlike the natural parent nonapeptide, the specific incorporation of one diaza-peptide unit at the N-terminus allows helical folding in water, which is further reinforced by the introduction of a second unit at the C-terminus. The ability of these foldamers to resist proteolysis, to mimic the small helical hot spot of transthyretin-amyloid β (Aβ) cross-interaction, and to decrease pathological Aβ aggregation demonstrates that the introduction of diaza-peptide units is a valid approach for designing mimics or inhibitors of protein-protein interaction and other therapeutic peptidomimetics. This study also reveals that small peptide foldamers can play the same role as physiological chaperone proteins and opens a new way to design inhibitors of amyloid protein aggregation, a hallmark of more than 20 serious human diseases such as Alzheimer's disease.

Manipulating the Dynamic Adaptivity of a Fluid Interface to Maintain the Multipotency of Mesenchymal Stromal Cells

The native extracellular matrix is highly dynamic with continuous mutual feedback between cells being responsible for many important cell function regulators. However, establishing bidirectional interaction between complex adaptive microenvironments and cells remains elusive. Herein an adaptive biomaterial based on lysozyme monolayers self-assembled at a perfluorocarbon FC40-water interface is reported. The dynamic adaptivity of interfacially assembled protein nanosheets is modulated independently of bulk mechanical properties by covalent crosslinking. This provides a scenario to establish bidirectional interactions of cells with liquid interfaces of varying dynamic adaptivity. This is found that growth and multipotency of human mesenchymal stromal cells (hMSCs) are enhanced at the highly adaptive fluid interface. The multipotency retention of hMSCs is mediated by low cell contractility and metabolomic activity involving the continuous mutual feedback between the cells and materials. Consequently, an understanding of the cells' response to dynamic adaptivity has substantial implications for regenerative medicine and tissue engineering.

Assessment of structural and functional similarity of biosimilar products: Bevacizumab as a case study

The antiangiogenic drug bevacizumab is a blockbuster therapeutic pharmaceutical product that is used to treat many different types of cancer including kidney, colon, rectum, lung, and breast cancer. As a result, multiple biosimilars have been approved across the various regulatory jurisdictions in India (>20 in number till date). The rapidly growing market and acceptance of biosimilars was the motivation to perform comparability study of bevacizumab biosimilars that are presently available in the Indian market. A comprehensive analytical and functional biosimilarity assessment has been performed to examine and compare innovator product of bevacizumab (Avastin-innovator product, Roche Products (India) Pvt Ltd) and six biosimilars that are being marketed in India (Abevmy from Mylan Pharmaceuticals Pvt Ltd, Bevazza from Lupin Ltd, Bryxta from Zydus Cadila, Krabeva from Biocon, Ivzumab from RPG Life Sciences Ltd, and Advamab from Alkem Laboratories Ltd). Physiochemical characterization of drug products was performed with respect to their primary structure (intact mass, reduced mass, peptide mapping by LC-MS), higher order structure (secondary structure by FTIR, Far-UV-CD, and tertiary structure by Near-UV-CD, intrinsic fluorescence spectroscopy), impurity profile (SE-HPLC, SEC-MALS, extrinsic fluorescence: size heterogenicity, degradation, stability; DLS: hydrodynamic radius; WCX-HPLC: charge variants analysis) and post-translational modifications by measuring reduced glycans through fluorescence dye analysis. Functional characterization was performed by SPR and cell proliferation assay. Further, chemometrics based quantitative evaluation of biosimilarity has been performed by combining the data obtained from analytical characterization platform. The analysis of the analytical, functional and chemometric results revealed significant levels of similarity, with biosimilar4 being the sole exception. Despite being within product specifications, Biosimilar4 displayed significant deviations with respect to critical quality attributes, including a lower proportion of monomer content, a larger percentage of basic charge variant species, and a lower proportion of aglycosylated glycoform.

Changes in Hemoglobin Properties in Complex with Glutathione and after Glutathionylation

Hemoglobin is the main protein of red blood cells that provides oxygen transport to all cells of the human body. The ability of hemoglobin to bind the main low-molecular-weight thiol of the cell glutathione, both covalently and noncovalently, is not only an important part of the antioxidant protection of red blood cells, but also affects its affinity for oxygen in both cases. In this study, the properties of oxyhemoglobin in complex with reduced glutathione (GSH) and properties of glutathionylated hemoglobin bound to glutathione via an SS bond were characterized. For this purpose, the methods of circular dichroism, Raman spectroscopy, infrared spectroscopy, tryptophan fluorescence, differential scanning fluorimetry, and molecular modeling were used. It was found that the glutathionylation of oxyhemoglobin caused changes in the secondary structure of the protein, reducing the alpha helicity, but did not affect the heme environment, tryptophan fluorescence, and the thermostability of the protein. In the noncovalent complex of oxyhemoglobin with reduced glutathione, the secondary structure of hemoglobin remained almost unchanged; however, changes in the heme environment and the microenvironment of tryptophans, as well as a decrease in the protein's thermal stability, were observed. Thus, the formation of a noncovalent complex of hemoglobin with glutathione makes a more significant effect on the tertiary and quaternary structure of hemoglobin than glutathionylation, which mainly affects the secondary structure of the protein. The obtained data are important for understanding the functioning of glutathionylated hemoglobin, which is a marker of oxidative stress, and hemoglobin in complex with GSH, which appears to deposit GSH and release it during deoxygenation to increase the antioxidant protection of cells.

A curcumin-crosslinked bilayer film of soy protein isolate and chitosan with enhanced antibacterial property for beef preservation and freshness monitoring

In this study, antibacterial and antioxidant bilayer films were prepared by using curcumin (Cur) crosslinked soy rotein isolate (SPI) and chitosan (CS). Molecular docking simulations and multispectral analysis revealed that hydrogen bonding and hydrophobic interactions were the primary driving forces that promoted the self-assembly of the bilayer films. The tensile strength, the UV-blocking properties and the hydrophobicity was greatly improved of the bilayer antimicrobial films. Moreover, water vapor permeability, thermal shrinkage and opacity were all reduced significantly. In addition, the composite films with curcumin demonstrated effective antioxidant activity and a slow release characteristic. Morphology observation of the bacteria by AFM revealed that the antibacterial bilayer film had a significant damaging effect on the cell structures of S. aureus and E. coli due to the dual antibacterial effect of curcumin and chitosan. SPI + Cur-CS antimicrobial bilayer film effectively inhibited the growth of bacteria and extended the shelf life of beef. According to the findings, SPI + Cur-CS antimicrobial bilayer film can be used as an active package material for beef preservation and freshness monitoring.

Tidying up the conformational ensemble of a disordered peptide by computational prediction of spectroscopic fingerprints

The most advanced structure prediction methods are powerless in exploring the conformational ensemble of disordered peptides and proteins and for this reason the "protein folding problem" remains unsolved. We present a novel methodology that enables the accurate prediction of spectroscopic fingerprints (circular dichroism, infrared, Raman, and Raman optical activity), and by this allows for "tidying up" the conformational ensembles of disordered peptides and disordered regions in proteins. This concept is elaborated for and applied to a dodecapeptide, whose spectroscopic fingerprint is measured and theoretically predicted by means of enhanced-sampling molecular dynamics coupled with quantum mechanical calculations. Following this approach, we demonstrate that peptides lacking a clear propensity for ordered secondary-structure motifs are not randomly, but only conditionally disordered. This means that their conformational landscape, or phase-space, can be well represented by a basis-set of conformers including about 10 to 100 structures. The implications of this finding have profound consequences both for the interpretation of experimental electronic and vibrational spectral features of peptides in solution and for the theoretical prediction of these features using accurate and computationally expensive techniques. The here-derived methods and conclusions are expected to fundamentally impact the rationalization of so-far elusive structure-spectra relationships for disordered peptides and proteins, towards improved and versatile structure prediction methods.

Macromolecular Crowding Promotes Re-entrant Liquid-Liquid Phase Separation of Human Serum Transferrin and Prevents Surface-Induced Fibrillation

Protein aggregation and inactivation upon surface immobilization are major limiting factors for analytical applications in biotechnology-related fields. Protein immobilization on solid surfaces often requires multi-step surface passivation, which is time-consuming and inefficient. Herein, we have discovered that biomolecular condensates of biologically active human serum transferrin (Tf) can effectively prevent surface-induced fibrillation and preserve the native-like conformation of phase-separated Tf over a period of 30 days. It has been observed that macromolecular crowding promotes homotypic liquid-liquid phase separation (LLPS) of Tf through enthalpically driven multivalent hydrophobic interactions possibly via the involvement of its low-complexity domain (residues 3-20) containing hydrophobic amino acids. The present LLPS of Tf is a rare example of salt-mediated re-entrant phase separation in a broad range of salt concentrations (0-3 M) solely via the involvement of hydrophobic interactions. Notably, no liquid-to-solid-like phase transition has been observed over a period of 30 days, suggesting the intact conformational integrity of phase-separated Tf, as revealed from single droplet Raman, circular dichroism, and Fourier transform infrared spectroscopy measurements. More importantly, we discovered that the phase-separated condensates of Tf completely inhibit the surface-induced fibrillation of Tf, illustrating the protective role of these liquid-like condensates against denaturation and aggregation of biomolecules. The cell mimicking compact aqueous compartments of biomolecular condensates with a substantial amount of interfacial water preserve the structure and functionality of Tf. Our present study highlights an important functional aspect of biologically active protein condensates and may have wide-ranging implications in cell physiology and biotechnological applications.

Effect of Atomic Layer Coating on the Stability of Solid Myoglobin Formulations

The effects of atomic layer (ALC) coating on physical properties and storage stability were examined in solid powders containing myoglobin, a model protein. Powders containing myoglobin and mannitol (1:1 w/w) were prepared by lyophilization or spray drying and subjected to aluminum oxide or silicon oxide ALC coating. Uncoated samples of these powders as well as coated and uncoated samples of myoglobin as received served as controls. After preparation (t0), samples were analyzed for moisture content, reconstitution time, myoglobin secondary structure, crystallinity, and protein aggregate content. Samples were stored for 3 months (t3) under controlled conditions (53% RH, 40 °C) in both open and closed vials and then analyzed as above. At t3, the recovery of soluble native (i.e., monomeric) protein depended on formulation, coating type, and drying method and was up to 2-fold greater in coated samples than in uncoated controls. Promisingly, some samples with high recovery also showed low soluble aggregate content (<10%) at t3 and low total monomer loss; the latter was correlated to sample moisture content. Overall, the results demonstrate that ALC coatings can stabilize solid protein formulations during storage, providing benefits over uncoated controls.

Exploring Enzymatic Conformational Dynamics at Surfaces through μ-FTIR Spectromicroscopy

Immobilization of proteins onto solid supports has critical industrial, technological, and medical applications, and is a daily task in chemical research. Significant conformational rearrangements often occur due to enzyme-surface interactions, and it is of broad interest to develop methods to probe and better understand these molecular-level changes that contribute to the enzyme's catalytic activity and stability. While circular dichroism is a common method for solution-phase conformational study, the application to surface-supported proteins is not trivial and spatial mapping is not viable. On the other hand, a nonlinear laser spectroscopy technique used to analyze surfaces and interfaces is not often found in most laboratories, therefore requiring an alternative and reliable method. Here, we employed high-dimensional data spectromicroscopy analysis in the infrared region (μ-FTIR) to investigate the enzyme's conformational change when adsorbed onto solid matrices, across a ca. 20 mm2 area. Alcohol dehydrogenase (ADH) enzyme was adopted as a model enzyme to interact with CaF2, Au, and Au-thiol model substrates, strategically chosen for mapping the enzyme dynamics on solid surfaces with different polarity/hydrophobicity properties and extendable to other materials. Two-dimensional chemical maps indicate that the enzyme adsorbs with different patterns in which secondary structures dynamically adjust to optimize interprotein and enzyme-surface interactions. The results suggest an experimental approach to identify and map enzyme conformational dynamics onto different solid surfaces across space and provide insights into immobilized protein structure investigations for areas such as biosensing and bioenergy.

Artificial intelligence-coupled plasmonic infrared sensor for detection of structural protein biomarkers in neurodegenerative diseases

Diagnosis of neurodegenerative disorders (NDDs) including Parkinson's disease and Alzheimer's disease is challenging owing to the lack of tools to detect preclinical biomarkers. The misfolding of proteins into oligomeric and fibrillar aggregates plays an important role in the development and progression of NDDs, thus underscoring the need for structural biomarker-based diagnostics. We developed an immunoassay-coupled nanoplasmonic infrared metasurface sensor that detects proteins linked to NDDs, such as alpha-synuclein, with specificity and differentiates the distinct structural species using their unique absorption signatures. We augmented the sensor with an artificial neural network enabling unprecedented quantitative prediction of oligomeric and fibrillar protein aggregates in their mixture. The microfluidic integrated sensor can retrieve time-resolved absorbance fingerprints in the presence of a complex biomatrix and is capable of multiplexing for the simultaneous monitoring of multiple pathology-associated biomarkers. Thus, our sensor is a promising candidate for the clinical diagnosis of NDDs, disease monitoring, and evaluation of novel therapies.

Concentration-Regulated Fibrillation of Soy Protein: Structure and In Vitro Digestion

The impact of protein types, heating temperatures, and times on protein fibrillation has been widely studied. However, there is little understanding of the influence of protein concentration (PC) on the protein fibril assembly. In this work, the structure and in vitro digestibility of soy protein amyloid fibrils (SAFs) were investigated at pH 2.0 and different PCs. Significant increases in fibril conversion rate and parallel β-sheets proportion were observed in SAFs upon increasing the PC from 2 to 8% (w/v). The AFM images showed that curly fibrils were prone to form at 2-6% PCs, while rigid, straight fibrils developed at higher PCs (≥8%). As evidenced in XRD results, increasing PC led to a more stable structure of SAFs with enhanced thermal stability and lower digestibility. Moreover, positive correlations among PC, β-sheet content, persistence length, enthalpy, and total hydrolysis were established. These findings would provide valuable insights into concentration-regulated protein fibrillation.

Molecular Modulator Approach for Controlling the Length of Chiral 1D Single-Helical Gold Nanoparticle Superstructures

Peptide-based methods have proven useful for constructing helical gold nanoparticle superstructures that exhibit strong plasmonic chiroptical activity. Superstructure syntheses using the amphiphilic peptide conjugate C₁₆-(AYSSGAPPM^oxPPF)₂ typically yield 1D helices with a broad length distribution. In this study, we introduce a molecular modulator approach for controlling helix length. It represents a first step toward achieving narrowly disperse populations of single helices fabricated using peptide-based methods. Varying amounts of modulator, C₁₆-(AYSSGA)₂, were added to C₁₆-(AYSSGAPPM^oxPPF)₂-based single-helix syntheses, resulting in decreased helix length and narrowing of the helix length distribution. Kinetic studies of fiber assembly were performed to investigate the mechanism by which the modulator affects helix length. It was found that the modulator leads to rapid peptide conjugate nucleation and fiber growth, which in turn results in large amounts of short fibers that serve as the underlying scaffold for the single-helix superstructures. These results constitute important advances toward generating monodisperse samples of plasmonic helical colloids.