Steam disinfection releases micro(nano)plastics from silicone-rubber baby teats as examined by optical photothermal infrared microspectroscopy

Oligomer nanoparticle release from polylactic acid plastics catalysed by gut enzymes triggers acute inflammation

The health risks of exposure to 'eco-friendly' biodegradable plastics of anthropogenic origin and their effects on the gastrointestinal tract are largely unknown. Here we demonstrate that the enzymatic hydrolysis of polylactic acid microplastics generated nanoplastic particles by competing for triglyceride-degrading lipase during gastrointestinal processes. Nanoparticle oligomers were formed by hydrophobically driven self-aggregation. In a mouse model, polylactic acid oligomers and their nanoparticles bioaccumulated in the liver, intestine and brain. Hydrolysed oligomers caused intestinal damage and acute inflammation. A large-scale pharmacophore model revealed that oligomers interacted with matrix metallopeptidase 12. Mechanistically, high binding affinity (K_d = 13.3 μmol l^-1) of oligomers to the catalytic zinc-ion finger domain led to matrix metallopeptidase 12 inactivation, which might mediate the adverse bowel inflammatory effects after exposure to polylactic acid oligomers. Biodegradable plastics are considered to be a solution to address environmental plastic pollution. Thus, understanding the gastrointestinal fates and toxicities of bioplastics will provide insights into potential health risks.

Ageing characteristics and microplastic release behavior from rainwater facilities under ROS oxidation

Reactive oxygen species (ROS) are ubiquitous in the natural environment that are generated by chemical or biochemical processes. Plastic rainwater facilities, as an important part of modern rainwater systems, are inevitably deteriorated by ROS. As a consequence, microplastics will be released. However, information on how ROS affect the ageing characteristics of plastic rainwater facilities and the subsequent microplastic release behavior is still insufficient. To address this knowledge gap, Fenton reagents were used to simulate the reactive oxygen species (ROS) induced ageing process of three typical plastic rainwater components (rainwater pipe, made of polyvinyl chloride; modular storage tank, made of polypropylene; inspection well, made of high-density polyethylene) and the subsequent microplastic release behavior. After 6 days of Fenton ageing, an increase in sharpness, holes, and fractures on the rainwater facilities' surface was observed by scanning electron microscope (SEM). The functional group changes on the rainwater facilities' surface were analyzed by Fourier transform infrared spectrometer (FTIR) and two-dimensional correlation spectroscopy (2D-COS) and compared with the results of X-ray photoelectron spectroscopy (XPS). During the ageing process, oxygen-containing functional groups were generated and the carbon chains were broken, which promoted peeling and the release of microplastics. The amount of released microplastics (ranging from 158 to 6617 items/g facility) varied with the type of rainwater facilities, and the order was modular storage tank > inspection well > rainwater pipe. The release amount increased with ageing time, and a significant linear relationship was observed (r² > 0.91). The particle size of the released microplastics ranged from 2 to 1362 μm, among which 10-30 μm particles accounted for the largest proportion (62.7 %). The release amount increased exponentially with decreasing particle size (r² > 0.71). This study indicates that large amounts of microplastics could be released from plastic rainwater components during ROS-induced ageing.

An evaluation model to predict microplastics generation from polystyrene foams and experimental verification

Microplastics (MPs) have caused global concerns due to their detrimental effects on ecosystems and even humans. Recycling aged plastic products ahead of MPs generation can be an effective approach to mitigate increasingly serious microplastic pollution. However, predicting MPs generation remains a great challenge. In this regard, we report a simulation method through associating plastics aging with mechanical failure on a time scale to predict MPs generation and give an experimental verification. The results indicate that the proposed evaluation method has high accuracy for predicting MPs generation from aged polystyrene foams. Under conditions of ultraviolet (UV) irradiation and heat for 1000 h, the aged polystyrene foam generate significant microplastics (6.78 × 10⁶ particles/cm³) by water scouring force after the expected aging time (400 h). Furthermore, the experiment results verify the synergistic effect of UV irradiation and heat on polystyrene MPs generation. This work suggests a new strategy to predict MPs generation from aged plastics in complex environments, which provides meaningful guidance for the use and recycling of plastic products.

Role of extracellular polymeric substances in the aggregation and biological response of micro(nano)plastics with different functional groups and sizes

In this work, the effects of extracellular polymeric substances (EPS) on the aggregation and biological responses of different micro(nano)plastics (MNPs, <1000 µm) were investigated. EPS increased the colloidal stability of PS MPs in NaCl or CaCl₂. For the three PS NPs (PS-NH₂, PS-COOH, and PS-naked), EPS also enhanced their colloidal stabilities in the presence of NaCl. However, the effect of CaCl₂ on the colloidal stabilities of PS NPs in the presence of EPS depended on their surface functional groups. In CaCl₂, both Derjaguin-Landau-Verwey-Overbeek theory and molecular bridging explained the interaction between MNPs (both NPs and MPs) and EPS. Laser Direct Infrared and scanning electron microscope imaging showed that opalescent EPS corona formed on PS MPs via intermolecular-bridging by Ca²⁺, and the critical coagulation concentrations (70 mM in NaCl, 1.5 mM in CaCl₂) in EPS were much lower than that for PS NPs (1000 mM for NaCl; 65 mM for CaCl₂). PS-NH₂ NPs showed the highest increase in the growth of bacteria (Bacillus subtilis), followed by PS MPs and PS-naked NPs, while PS-COOH NPs had no significant effect. Biological response of PS NPs was unaffected by EPS, while EPS further enhanced the positive effects of PS MPs on bacterial growth.

A Dual Fluorescence Assay Enables High-Throughput Screening for Poly(ethylene terephthalate) Hydrolases

The drastically increasing consumption of petroleum-derived plastics hasserious environmental impacts and raises public concerns. Poly(ethylene terephthalate) (PET) is amongst the most extensively produced synthetic polymers. Enzymatic hydrolysis of PET recently emerged as an enticing path for plastic degradation and recycling. In-lab directed evolution has revealed the great potential of PET hydrolases (PETases). However, the time-consuming and laborious PETase assays hinder the identification of effective variants in large mutant libraries. Herein, we devise and validate a dual fluorescence-based high-throughput screening (HTS) assay for a representative IsPETase. The two-round HTS of a pilot library consisting of 2850 IsPETase variants yields six mutant IsPETases with 1.3-4.9 folds improved activities. Compared to the currently used structure- or computational redesign-based PETase engineering, this HTS approach provides a new strategy for discovery of new beneficial mutation patterns of PETases.

Assessing the Mass Concentration of Microplastics and Nanoplastics in Wastewater Treatment Plants by Pyrolysis Gas Chromatography-Mass Spectrometry

The level of microplastics (MPs) in wastewater treatment plants (WWTPs) has been well evaluated by the particle number, while the mass concentration of MPs and especially nanoplastics (NPs) remains unclear. In this study, pyrolysis gas chromatography-mass spectrometry was used to determine the mass concentrations of MPs and NPs with different size ranges (0.01-1, 1-50, and 50-1000 μm) across the whole treatment schemes in two WWTPs. The mass concentrations of total MPs and NPs decreased from 26.23 and 11.28 μg/L in the influent to 1.75 and 0.71 μg/L in the effluent, with removal rates of 93.3 and 93.7% in plants A and B, respectively. The proportions of NPs (0.01-1 μm) were 12.0-17.9 and 5.6-19.5% in plants A and B, respectively, and the removal efficiency of NPs was lower than that of MPs (>1 μm). Based on annual wastewater effluent discharge, it is estimated that about 0.321 and 0.052 tons of MPs and NPs were released into the river each year. Overall, this study investigated the mass concentration of MPs and NPs with a wide size range of 0.01-1000 μm in wastewater, which provided valuable information regarding the pollution level and distribution characteristics of MPs, especially NPs, in WWTPs.

Size-Dependent Uptake and Depuration of Nanoplastics in Tilapia (Oreochromis niloticus) and Distinct Intestinal Impacts

Nanoplastics (NPs, <1 μm) are of great concern worldwide because of their high potential risk toward organisms in aquatic systems, while very little work has been focused on their tissue-specific toxicokinetics due to the limitations of NP quantification for such a purpose. In this study, NPs with two different sizes (86 and 185 nm) were doped with palladium (Pd) to accurately determine the uptake and depuration kinetics in various tissues (intestine, stomach, liver, gill, and muscle) of tilapia (Oreochromis niloticus) in water, and subsequently, the corresponding toxic effects in the intestine were explored. Our results revealed uptake and depuration constants of 2.70-378 L kg^-1 day^-1 and 0.138-0.407 day^-1 for NPs in tilapia for the first time, and the NPs in tissues were found to be highly dependent on the particle size. The intestine exhibited the greatest relative accumulation of both sizes of NPs; the smaller NPs caused more severe damage than the larger NPs to the intestinal mucosal layer, while the larger NPs induced a greater impact on microbiota composition. The findings of this work explicitly indicate the size-dependent toxicokinetics and intestinal toxicity pathways of NPs, providing new insights into the ecological effects of NPs on aquatic organisms.

Disposable face masks release micro particles to the aqueous environment after simulating sunlight aging: Microplastics or non-microplastics?

This study focuses on characterizing microplastics and non-microplastics released from surgical masks (SMs), N95 masks (N95), KN95 masks (KN95), and children's masks (CMs) after simulating sunlight aging. Based on micro-Raman spectrum analysis, it was found that the dominant particles released from masks were non-microplastics (66.76-98.85%). Unfortunately, CMs released the most microplastics, which is 8.92 times more than SMs. The predominant size range of microplastics was 30-500 µm, and the main polymer types were PP and PET. Compared with the whole SMs, the microplastic particles released from the cutting-SMs increased conspicuously, which is 12.15 times that of the whole SMs. The main components of non-microplastics include β-carotene, microcrystalline cellulose 102, and eight types of minerals. Furthermore, non-microplastics were mainly fibrous and fragmented in appearance, similar to the morphology of microplastics. After 15 days of UVA-aging, the fibers of the face layers had cracks to varying degrees. It was estimated that these four types of masks can release at least 31.5 trillion microplastics annually in China. Overall, this study demonstrated that the masks could release a large quantity of microplastics and non-microplastics to the environment after sunlight aging, deserving urgent attention in the future study.

Analysis of microplastics released from plastic take-out food containers based on thermal properties and morphology study

Plastic take-out food containers may release microplastics (MPs) into food and pose a potential risk to food safety and human health. Here, after being subjected to hot water treatment, MPs released from three types of plastic food containers (polypropylene, PP; polyethylene, PE; expanded polystyrene, EPS) were identified by micro-Raman spectroscopy. The results showed that the size of released MPs ranged from 0.8-38 μm and over 96% MPs were smaller than 10 μm. Various MPs concentrations were found from the three types of containers, that is, 1.90 × 10⁴, 1.01 × 10⁵, and 2.82 × 10⁶ particles/L on average from PP, PE, and EPS, respectively. Moreover, based on thermal and morphology analysis, we discovered that both relaxations of the polymer chains in the rubbery state and defects caused by processing techniques might contribute to the release of MPs. Thus, such release can be reduced by increasing the thermal stability of the materials and mitigating the defects generated during production.

Bionic Engineered Protein Coating Boosting Anti-Biofouling in Complex Biological Fluids

Implantable medical devices have been widely applied in diagnostics, therapeutics, organ restoration, and other biomedical areas, but often suffer from dysfunction and infections due to irreversible biofouling. Inspired by the self-defensive "vine-thorn" structure of climbing thorny plants, a zwitterion-conjugated protein is engineered via grafting sulfobetaine methacrylate (SBMA) segments on native bovine serum albumin (BSA) protein molecules for surface coating and antifouling applications in complex biological fluids. Unlike traditional synthetic polymers of which the coating operation requires arduous surface pretreatments, the engineered protein BSA@PSBMA (PolySBMA conjugated BSA) can achieve facile and surface-independent coating on various substrates through a simple dipping/spraying method. Interfacial molecular force measurements and adsorption tests demonstrate that the substrate-foulant attraction is significantly suppressed due to strong interfacial hydration and steric repulsion of the bionic structure of BSA@PSBMA, enabling coating surfaces to exhibit superior resistance to biofouling for a broad spectrum of species including proteins, metabolites, cells, and biofluids under various biological conditions. This work provides an innovative paradigm of using native proteins to generate engineered proteins with extraordinary antifouling capability and desired surface properties for bioengineering applications.

What determines accuracy of chemical identification when using microspectroscopy for the analysis of microplastics?

Fourier transform infrared (FTIR) and Raman microspectroscopy are methods applied in microplastics research to determine the chemical identity of microplastics. These techniques enable quantification of microplastic particles across various matrices. Previous work has highlighted the benefits and limitations of each method and found these to be complimentary. Within this work, metadata collected within an interlaboratory method validation study was used to determine which variables most influenced successful chemical identification of un-weathered microplastics in simulated drinking water samples using FTIR and Raman microspectroscopy. No variables tested had a strong correlation with the accuracy of chemical identification (r = ≤0.63). The variables most correlated with accuracy differed between the two methods, and include both physical characteristics of particles (color, morphology, size, polymer type), and instrumental parameters (spectral collection mode, spectral range). Based on these results, we provide technical recommendations to improve capabilities of both methods for measuring microplastics in drinking water and highlight priorities for further research. For FTIR microspectroscopy, recommendations include considering the type of particle in question to inform sample presentation and spectral collection mode for sample analysis. Instrumental parameters should be adjusted for certain particle types when using Raman microspectroscopy. For both instruments, the study highlighted the need for harmonization of spectral reference libraries among research groups, including the use of libraries containing reference materials of both weathered plastic and natural materials that are commonly found in environmental samples.

Ultrastrong, Thermally Stable, and Food-Safe Seaweed-Based Structural Material for Tableware

Widely used disposable plastic tableware is usually buried or directly discharged into the natural environment after using, which poses potential threats to the natural environment and human health. To solve this problem, nondegradable plastic tableware needs to be replaced by tableware composed of biodegradable structural materials with both food safety and the excellent mechanical and thermal properties. Here, a food-safe sargassum cellulose nanofiber (SCNF) is extracted from common seaweed in an efficient and low energy consuming way under mild reaction conditions. Then, by assembling the SCNF into a dense bulk material, a strong sargassum cellulose nanofiber structural material (SCNSM) with high strength (283 MPa) and high thermal stability (>160 °C) can be prepared. The SCNSM also possesses good machinability, which can be processed into tableware with different shapes, e.g., knives and forks. The overall performance of the SCNSM-based tableware is better than commercial plastic, wood-based, and poly(lactic acid) tableware, which shows great application potential in the tableware field.

Bond-selective intensity diffraction tomography

Recovering molecular information remains a grand challenge in the widely used holographic and computational imaging technologies. To address this challenge, we developed a computational mid-infrared photothermal microscope, termed Bond-selective Intensity Diffraction Tomography (BS-IDT). Based on a low-cost brightfield microscope with an add-on pulsed light source, BS-IDT recovers both infrared spectra and bond-selective 3D refractive index maps from intensity-only measurements. High-fidelity infrared fingerprint spectra extraction is validated. Volumetric chemical imaging of biological cells is demonstrated at a speed of ~20 s per volume, with a lateral and axial resolution of ~350 nm and ~1.1 µm, respectively. BS-IDT's application potential is investigated by chemically quantifying lipids stored in cancer cells and volumetric chemical imaging on Caenorhabditis elegans with a large field of view (~100 µm x 100 µm).

Microplastic pollution in soils, plants, and animals: A review of distributions, effects and potential mechanisms

Increasing production of synthetic plastics and poor management of plastic wastes have dramatically increased the amount of plastics in the environment. In 2014, at the first United Nations Environment Assembly, marine plastic waste pollution was listed as one of the 10 most pressing environmental issues. In addition, there is much plastic waste in terrestrial ecosystems due to substantial residues from agricultural mulching and packing. As a recently recognized pollutant, microplastics (MPs) have attracted significant attention from the public and various governments. Concentrations of MPs in the environment vary among locations, from <100 to >1 × 10⁶ particles per cubic meter. Many studies have addressed the impacts and potential mechanisms of MPs on the environment and organisms. Humans and other organisms can ingest or carry MPs in a variety of passive ways and these MPs can have a range of negative effects on metabolism, function, and health. Additionally, given their large surface area, MPs can sorb various pollutants, including heavy metals and persistent organic pollutants, with serious implications for animals and human wellbeing. However, due to their complexity and a lack of accurate determination methods, the systematic impacts of MP pollution on whole foodwebs are not clearly established. Therefore, this review summarizes current research advances in MP pollution, particularly the impact of MPs on soils, plants, and animals, and proposes potential future research prospects to better characterize MPs.

Extraction and quantification of polystyrene nanoplastics from biological samples

Accurate quantification of nanoplastics (NPs) in complex matrices remains a challenge, especially for biological samples containing high content of organic matters. Herein, a new method extracting and quantifying polystyrene (PS) NPs from biological samples was developed. The extraction included alkaline digestion, centrifugation, and cloud point extraction (CPE), and the quantification included gold nanoparticles formation and labeling on surfaces of the extracted NPs and thereafter measurement with single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). Results show that 25% tetramethylammonium hydroxide solution was an effective alkaline digestion solution for biological matrices, and CPE after centrifugation (3000 rpm, 10 min) was applicable to purify and enrich PS NPs with different sizes (100 and 500 nm) and surface functionalities (-COOH and -NH₂ modifications) from the digestion solution. The efficiency of Au labeling on PS NPs surface was improved by about 70% in the presence of 100 μM cetyltrimethylammonium bromide. The performance of the quantification method was examined by extraction and measurement of PS NPs spiked in four representative organism samples including bacteria, algae, nematode, and earthworm, and was further validated by analyzing the accumulated PS NPs in exposed nematodes. Good recovery rates (65 ± 10%-122 ± 22%) were achieved for spiking levels of 5-50 μg g^-1; the limit of detection was 3.7 × 10⁷ particles g^-1, corresponding to the mass concentration of about 0.02 and 2.5 μg g^-1 for the 100 nm and 500 nm PS NPs, respectively. The established extraction and quantification methods are efficient and sensitive, providing a useful approach for further exploring the environmental behavior and toxicity of NPs.

Mid-Infrared Photothermal Microscopy: Principle, Instrumentation, and Applications

Midinfrared photothermal (MIP) microscopy, also called optical photothermal infrared (O-PTIR) microscopy, is an emerging tool for bond-selective chemical imaging of living biological and material samples. In MIP microscopy, a visible probe beam detects the photothermal-based contrast induced by a vibrational absorption. With submicron spatial resolution, high spectral fidelity, and reduced water absorption background, MIP microscopy has overcome the limitations in infrared chemical imaging methods. In this review, we summarize the basic principle of MIP microscopy, the different origins of MIP contrasts, and recent technology development that pushed the resolution, speed, and sensitivity of MIP imaging to a new stage. We further emphasize its broad applications in life science and material characterization, and provide a perspective of future technical advances.

High-performance micro/nanoplastics characterization by MALDI-FTICR mass spectrometry

Micro/nanoplastics (MNPs) are widespread environmental pollutants that cause high health risks. However, high heterogeneity in particle sizes and chemical compositions of MNPs make their accurate characterization extremely challenging. Herein, we established a matrix-assisted laser desorption ionization-Fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR MS) strategy for the unambiguous characterization of different types of MNPs with high performance, including polystyrene, polyethylene glycol terephthalate, polyamide, polymethyl methacrylate, acrylonitrile butadiene styrene copolymer, and polycarbonate. The MNP sample preparation and detection conditions were systematically optimized by using response surface methodology, and the MS detection signal-to-noise ratios were improved 1.5 times on average. The ultrahigh mass resolution of FTICR MS is crucial to the unambiguous elucidation of MNP structures. We demonstrate that this MS strategy is highly efficient in the characterization of polymer constitutions of environmental MNPs derived from foam, bottles, cable ties, and compact discs, providing a promising tool for MNP detection and safety evaluation.

Scalable Production of Biodegradable, Recyclable, Sustainable Cellulose-Mineral Foams via Coordination Interaction Assisted Ambient Drying

Heavy reliance on petrochemical-based plastic foams in both industry and society has led to severe plastic pollution (the so-called "white pollution"). In this work, we develop a biodegradable, recyclable, and sustainable cellulose/bentonite (Cel/BT) foam material directly from resource-abundant natural materials (i.e., lignocellulosic biomass and minerals) via ambient drying. The strong resistance to the capillary force-driven structural collapse of the preformed three-dimensional (3D) network during the ambient drying process can be ascribed to the purpose-designed cellulose-bentonite coordination interaction, which provides a practical way for the locally scalable production of foam materials with designed shapes without complex processing and intensive energy consumption. Benefiting from the strong cellulose-bentonite coordination interaction, the Cel/BT foam material demonstrates high mechanical strength and outstanding thermal stability, outperforming commercial plastic polystyrene foam. Furthermore, the Cel/BT foam presents environmental impacts much lower than those of petrochemical-based plastic foams as it can be 100% recycled in a closed-loop recycling process and easily biodegraded in the environment (natural cellulose goes back to the carbon cycle, and bentonite minerals return to the geological cycle). This study demonstrates an energy-efficient ambient drying approach for the local and scalable production of an all-natural cellulose/bentonite foam for sustainable packaging, buildings, and beyond, presenting great potential in response to "white pollution" and resource shortage.

Alcohol Pretreatment to Eliminate the Interference of Micro Additive Particles in the Identification of Microplastics Using Raman Spectroscopy

Raman spectroscopy is an indispensable tool in the analysis of microplastics smaller than 20 μm. However, due to its limitation, Raman spectroscopy may be incapable of effectively distinguishing microplastics from micro additive particles. To validate this hypothesis, we characterized and compared the Raman spectra of six typical slip additives with polyethylene and found that their hit quality index values (0.93-0.96) are much higher than the accepted threshold value (0.70) used to identify microplastics. To prevent this interference, a new protocol involving an alcohol treatment step was introduced to successfully eliminate additive particles and accurately identify microplastics. Tests using the new protocol showed that three typical plastic products (polyethylene pellets, polyethylene bottle caps, and polypropylene food containers) can simultaneously release microplastic-like additive particles and microplastics regardless of the plastic type, daily-use scenario, or service duration. Micro additive particles can also adsorb onto and modify the surfaces of microplastics in a manner that may potentially increase their health risks. This study not only reveals the hidden problem associated with the substantial interference of additive particles in microplastic detection but also provides a cost-effective method to eliminate this interference and a rigorous basis to quantify the risks associated with microplastic exposure.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.

Super-Resolved 3D Mapping of Molecular Orientation Using Vibrational Techniques

When a sample has an anisotropic structure, it is possible to obtain additional information controlling the polarization of incident light. With their straightforward instrumentation approaches, infrared (IR) and Raman spectroscopies are widely popular in this area. Single-band-based determination of molecular in-plane orientation, typically used in materials science, is here extended by the concurrent use of two vibration bands, revealing the orientational ordering in three dimension. The concurrent analysis was applied to IR spectromicroscopic data to obtain orientation angles of a model polycaprolactone spherulite sample. The applicability of this method spans from high-resolution, diffraction-limited Fourier transform infrared (FT-IR) and Raman imaging to super-resolved optical photothermal infrared (O-PTIR) imaging. Due to the nontomographic experimental approach, no image distortion is visible and nanometer scale orientation domains can be observed. Three-dimensional (3D) bond orientation maps enable in-depth characterization and consequently precise control of the sample’s physicochemical properties and functions.

Key knowledge gaps for One Health approach to mitigate nanoplastic risks

There are increasing concerns over the threat of nanoplastics to environmental and human health. However, multidisciplinary barriers persist between the communities assessing the risks to environmental and human health. As a result, the hazards and risks of nanoplastics remain uncertain. Here, we identify key knowledge gaps by evaluating the exposure of nanoplastics in the environment, assessing their bio-nano interactions, and examining their potential risks to humans and the environment. We suggest considering nanoplastics a complex and dynamic mixture of polymers, additives, and contaminants, with interconnected risks to environmental and human health. We call for comprehensive integration of One Health approach to produce robust multidisciplinary evidence to nanoplastics threats at the planetary level. Although there are many challenges, this holistic approach incorporates the relevance of environmental exposure and multi-sectoral responses, which provide the opportunity to identify the risk mitigation strategies of nanoplastics to build resilient health systems.