Strong Antibacterial Polydopamine Coatings Prepared by a Shaking-assisted Method

Biofunctionalization of zirconia with cell-adhesion peptides via polydopamine crosslinking for soft tissue engineering: effects on the biological behaviors of human gingival fibroblasts and oral bacteria

Rapid soft tissue integration is essential for long-term dental implant success. Zirconia is increasingly used as an abutment material owing to its excellent aesthetic properties and biocompatibility; however, it is bioinert, and tissue integration is poor. We developed a feasible surface modification method, exploiting the reactivity of polydopamine (PDA) films to immobilize cell-adhesion peptides (Arg-Gly-Asp, RGD) onto zirconia abutment surfaces. Further, we evaluated the effect thereof on human gingival fibroblast (HGF) behavior and oral bacterial adhesion, which influence the peri-implant soft tissue seal. HGF responses to linear KGGRGDSP and cyclic RGDfK sequences were compared. PDA deposition and covalent coupling of RGD were verified by X-ray photoelectron spectroscopy and fluorescence microscopy. The biological behaviors of HGFs on the modified zirconia; i.e., adhesion, spreading, proliferation, gene and protein expression, were elucidated. Biofunctionalization of zirconia with the adhesion peptides significantly enhanced the biological activities of HGFs. Cyclic RGD induced slightly improved cell attachment, spreading, and proliferation, but similar cell differentiation when compared to linear RGD peptides. To assess their antimicrobial properties, the different substrates were exposed to cultures of the early colonizer Streptococcus mutans or the periodontal pathogen Porphyromonas gingivalis, and bacterial adhesion was evaluated by scanning electron microscopy and live/dead staining. PDA and PDA-RGD coatings decreased zirconia surface colonization by both bacterial species to similar extents. Thus, PDA-RGD-functionalized zirconia modulates specific HGF responses, while maintaining the antimicrobial activity of the PDA coating. The selective bio-interaction pattern of this surface modification holds great promise for improving soft-tissue integration around zirconia abutments in clinical applications.

Enhanced antibacterial activity of titanium by surface modification with polydopamine and silver for dental implant application

BACKGROUND

Biofilm formation and microbial colonization on the surface of implant devices may cause dental caries and peri-implantitis. Therefore, various surface treatments have been developed to improve the antibacterial activity of titanium implant.

METHODS

Silver-loaded polydopamine coating was formed by immersing pure titanium in dopamine hydrochloride/HCl buffer solution for 24 h in 50 mL silver nitrate solutions with different concentrations for 30 min. Microbial growth inhibition and microbial growth curve analyses for bacterial solutions of Streptococcus mutans and Porphyromonas gingivalis incubated with the specimens were respectively conducted by counting the numbers of colonies on agar solid medium and by measuring absorbance using enzyme-linked immunosorbent assay reader.

RESULTS

Silver nanoparticles were uniformly distributed over the whole surface of the polydopamine and silver-coated titanium specimens. The numbers of microbial colonies for both bacteria cultured with surface-modified titanium were significantly lower than those cultured with uncoated titanium. When Streptococcus mutans and Porphyromonas gingivalis were cultured with surface-modified titanium, the lag phase of the growth curves for both bacteria was continually maintained, whereas the lag phase for Streptococcus mutans and Porphyromonas gingivalis changed to exponential phase after 9 and 15 h, respectively, when both bacteria were cultured with uncoated titanium.

CONCLUSION

It was confirmed that the coating of polydopamine and silver on the surface of titanium effectively retards the microbial growth, which can cause the formation of biofilm and pathogenesis of gum disease in the mouth.

Fabrication and functionalization of 3D-printed soft and hard scaffolds with growth factors for enhanced bioactivity

Strategies to improve the acceptance of scaffolds by the body is crucial in tissue engineering (TE) which requires tailoring of the pore structure, mechanical properties and surface characteristics of the scaffolds. In the current study we used a 3-dimensional (3D) printing technique to tailor the pore structure and mechanical properties of (i) nanocellulose based hydrogel scaffolds for soft tissue engineering and (ii) poly lactic acid (PLA) based scaffolds for hard tissue engineering in combination with surface treatment by protein conjugation for tuning the scaffold bioactivity. Dopamine coating of the scaffolds enhanced the hydrophilicity and their capability to bind bioactive molecules such as fibroblast growth factor (FGF-18) for soft TE scaffolds and arginyl glycyl aspartic acid (RGD) peptide for hard TE scaffolds, which was confirmed using MALDI-TOFs. This functionalization approach enhanced the performance of the scaffolds and provided antimicrobial activity indicating that these scaffolds can be used for cartilage or bone regeneration applications. Blood compatibility studies revealed that both the materials were compatible with human red blood cells. Significant enhancement of cell attachment and proliferation confirmed the bioactivity of growth factor functionalized 3D printed soft and hard tissues. This approach of combining 3D printing with biological tuning of the interface is expected to significantly advance the development of biomedical materials related to soft and hard tissue engineering.

3D printed scaffolds with tailored bioactivity using protein conjugation.

KR-12 coating of polyetheretherketone (PEEK) surface via polydopamine improves osteointegration and antibacterial activity in vivo

KR-12 was grafted onto the surface of PEEK, which improved the hydrophilicity of the material surface, promoted cell adhesion, osteogenic differentiation and osseointegration, while also endowing the appreciable antibacterial activity on the material surface.

Antibacterial Activity Against Methicillin-Resistant Staphylococcus aureus of Colloidal Polydopamine Prepared by Carbon Dot Stimulated Polymerization of Dopamine

A simple one-step process for the polymerization of dopamine has been developed using nitrogen-doped carbon dots (N@C–dots) as the sole initiator. The synthesized amorphous polydopamine (PDA)-doped N@C–dots (PDA–N@C–dots composite) exhibited a negative charge of –39 mV with particle sizes ranging from 200 to 1700 nm. The stable colloidal solution was active against methicillin-resistant Staphylococcus aureus (MRSA), a Gram-negative bacterium. The strong adhesion of the polymer to the bacterial membrane resulted in a limited diffusion of nutrients and wastes in and out of the cell cytosol, which is a generic mechanism to trigger cell death. Another possible route is the autoxidation of the catechol moiety of PDA to form quinone and release reactive oxygen species (ROS) such as superoxide radicle and hydrogen peroxide, two well-known ROS with antimicrobial properties against both Gram-negative and Gram-positive bacteria.

Polydopamine -aminoglycoside nanoconjugates: Synthesis, characterization, antimicrobial evaluation and cytocompatibility

Development of nanoparticle- and self-assembled nanomaterial-based therapeutics has become a rapidly growing area in the field of nanotechnology. One of the natural compounds, dopamine, presents as a neurotransmitter in the human brain serving as a messenger and deals with the behavioural responses, has provided an ideal platform through self-polymerization under aerobic conditions leading to the formation of a beneficial organic biopolymer, polydopamine (PDA). This polymer provides sufficient reactive functionalities, which can further be use to attach amine- or thiol-containing ligands to obtain conjugates. In the present study, self-polymerized polydopamine nanoparticles have been synthesized and tethered to aminoglycosides (AGs: Gentamicin, Kanamycin and Neomycin) through amino moieties to obtain PDA-AG nanoconjugates. These nanoconjugates are characterized by physicochemical techniques and evaluated for their antimicrobial potency against various bacterial strains including resistant ones. Simultaneously, cytocompatibility was also assessed for PDA-AG nanoconjugates. Of these three nanoconjugates (PDA-Gentamicin, PDA-Kanamycin and PDA-Neomycin), PDA-Kanamycin (PDA-K) nanoconjugate exhibited the highest activity against potent pathogens, least toxicity in human embryonic kidney (HEK 293) cells and intense toxic effects on human glioblastoma (U87) cells. Together, these results advocate the promising potential of these nanoconjugates to be used as potent antimicrobials in future applications.

Antibacterial Properties of Mussel-Inspired Polydopamine Coatings Prepared by a Simple Two-Step Shaking-Assisted Method

A simple two-step, shaking-assisted polydopamine (PDA) coating technique was used to impart polypropylene (PP) mesh with antimicrobial properties. In this modified method, a relatively large concentration of dopamine (20 mg ml⁻¹) was first used to create a stable PDA primer layer, while the second step utilized a significantly lower concentration of dopamine (2 mg ml⁻¹) to promote the formation and deposition of large aggregates of PDA nanoparticles. Gentle shaking (70 rpm) was employed to increase the deposition of PDA nanoparticle aggregates and the formation of a thicker PDA coating with nano-scaled surface roughness (RMS = 110 nm and Ra = 82 nm). Cyclic voltammetry experiment confirmed that the PDA coating remained redox active, despite extensive oxidative cross-linking. When the PDA-coated mesh was hydrated in phosphate saline buffer (pH 7.4), it was activated to generate 200 μM hydrogen peroxide (H₂O₂) for over 48 h. The sustained release of low doses of H₂O₂ was antibacterial against both gram-positive (Staphylococcus epidermidis) and gram-negative (Escherichia coli) bacteria. PDA coating achieved 100% reduction (LRV ~3.15) when incubated against E. coli and 98.9% reduction (LRV ~1.97) against S. epi in 24 h.

Development and Characterization of an Antimicrobial Polydopamine Coating for Conservation of Humpback Whales

Migration patterns of humpback whales have been monitored using 316L stainless steel (SS) satellite telemetry tags. The potential for tissue infection and necrosis is increased if the bacteria, naturally a part of the diverse microbiome on the skin of humpback whales, can adhere to and colonize the surface of the tags. Polydopamine (pDA) has the potential to prevent the adhesion of one of the most prevalent bacterial strains on the surface of the skin of cetaceans (Psychrobacter) through the release of hydrogen peroxide. The release of hydrogen peroxide from the pDA coatings (40-100 μM) has the ability to induce a bacteriostatic response in E. coli, a commonly used bacteria strain in antimicrobial studies and potentially P. cryohalolentis, a common humpback associated bacteria. The H₂O₂ dose required to induce bacteriostatic conditions in E. coli is approximately 60 μM and in P. cryohalolentis is 100 μM. Bacterial adhesion on the surface of pDA coated SS coupons was measured first using E. coli. The coating successfully prevented adhesion of E. coli on the surface of SS coupons under certain conditions (60% reduction, p < 0.05) but the same was not seen with P. cryohalolentis. When coating conditions were altered (an increase in pH and temperature) the adhesion of P. cryohalolentis was reduced (80% reduction, p < 0.001). Overall, the pDA coatings have the capacity to generate varying amounts of hydrogen peroxide by altering the coating conditions and have the ability to reduce bacterial adhesion on the surface of satellite telemetry tags, and therefore the potential to increase tag functional service lifetime.

Construction of novel temperature-responsive hydrogel culture system based on the biomimetic method for stem cell sheet harvest

Temperature-responsive hydrogel culture system is considered as an ideal platform for cell sheet harvest, but its complex preparation methods and harsh reaction conditions limit its application. Inspired by the marine mussels, a biomimetic method presented here is to construct a novel temperature-responsive hydrogel culture system for stem cell sheet harvest. The tissue culture polystyrene is first modified with polydopamine coating, and then amine-terminated poly(N-isopropylacrylamide) is grafted onto the coating via the Schiff base or Michael addition reaction to construct the temperature-sensitive hydrogel culture system. Then, bone marrow stromal cells are cultured on the culture system to construct cell sheets. The prepared culture system shows significant temperature-sensitive property with the grafted concentrations of poly(N-isopropylacrylamide) ranging from 0.5 to 1 g/L. Meanwhile, the constructed culture system has low cytotoxicity and facilitates the stem cell adhesion, proliferation, and cell sheet formation at 37°C. When the culture system is placed in a 20°C environment, the cell sheet can be completely detached from the surface of tissue culture polystyrene without being treated with any enzymes. More importantly, the cell morphology, cell sheet thickness, and the fibril structure of the associated proteins are similar to the cells cultured on the tissue culture polystyrene without modification. The biomimetic, simple, inexpensive, and environmentally friendly preparation of the culture system enables it to be used for the harvest of cell sheet and even applied to tissue engineering for tissue regeneration.

Role of polydopamine's redox-activity on its pro-oxidant, radical-scavenging, and antimicrobial activities

Polydopamine (PDA) is a bioinspired material and coating that offers diverse functional activities (e.g., photothermal, antioxidant, and antimicrobial) for a broad range of applications. Although PDA is reported to be redox active, the association between PDA's redox state and its functional performance has been difficult to discern because of PDA's complex structure and limitations in methods to characterize redox-based functions. Here, we use an electrochemical reverse engineering approach to confirm that PDA is redox-active and can repeatedly accept and donate electrons. We observed that the electron-donating ability of PDA offers the detrimental pro-oxidant effect of donating electrons to O₂ to generate reactive oxygen species (ROS) or, alternatively, the beneficial antioxidant effect of quenching oxidative free radicals. Importantly, PDA's electron-donating ability depends on its redox state and is strongly influenced by external factors including metal ion binding as well as near-infrared (NIR) irradiation. Furthermore, we demonstrated that PDA possesses redox state-dependent antimicrobial properties in vitro and in vivo. We envision that clarification of PDA's redox activity will enable better understanding of PDA's context-dependent properties (e.g., antioxidant and pro-oxidant) and provide new insights for further applications of PDA. STATEMENT OF SIGNIFICANCE: We believe this is the first report to characterize the redox activities of polydopamine (PDA) and to relate these redox activities to functional properties important for various proposed applications of PDA. We observed that polydopamine nanoparticles 1) are redox-active; 2) can repeatedly donate and accept electrons; 3) can accept electrons from reducing agents (e.g., ascorbate), donate electrons to O₂ to generate ROS, and donate electrons to free radicals to quench them; 4) have redox state-dependent electron-donating abilities that are strongly influenced by metal ion binding as well as NIR irradiation; and 5) have redox state-dependent antimicrobial activities.

Tailoring the Performance of Organic Solvent Nanofiltration Membranes with Biophenol Coatings

This study reports a systematic investigation of fine-tuning the filtration performance of nanofiltration membranes with biophenol coatings to produce solvent-resistant membranes with 390-1550 g mol-1 molecular weight cutoff (MWCO) and 0.5-40 L m-2 h-1 bar-1 permeance. Six kinds of inexpensive, commercial biophenols (dopamine, tannic acid, vanillyl alcohol, eugenol, morin, and quercetin) were subjected to identical oxidant-promoted polymerization to coat six kinds of loose asymmetric membrane supports: polyimide (PI), polyacrylonitrile (PAN), polysulfone (PSf), polyvinylidene difluoride (PVDF), polybenzimidazole (PBI), and polydimethylsiloxane (PDMS). The coatings were characterized by Fourier-transform infrared spectroscopy (FTIR), and the morphologies were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The long-term stability of 42 membranes were tested in 12 organic solvents, including emerging green solvents MeTHF and Cyrene. The biophenol coatings led to tighter membranes with a decrease in MWCO of 12-79% at a penalty of a 22-92% permeance decrease in acetone.

Studies on Cell Compatibility, Antibacterial Behavior, and Zeta Potential of Ag-Containing Polydopamine-Coated Bioactive Glass-Ceramic

Dopamine is a small molecule that mimics the adhesive component (L-DOPA) of marine mussels with a catecholamine structure. Dopamine can spontaneously polymerize to form polydopamine (PDA) in a mild basic environment. PDA binds, in principle, to all types of surfaces and offers a platform for post-modification of surfaces. In this work, a novel Ag-containing polydopamine coating has been developed for the functionalization of bioactive glass-ceramics. In order to study the interactions between the surface of uncoated and coated samples and the environment, we have measured the surface zeta potential. Results confirmed that PDA can interact with the substrate through different chemical groups. A strongly negative surface zeta potential was measured, which is desirable for biocompatibility. The dual function of the material, namely the capability to exhibit bioactive behavior while being antibacterial and not harmful to mammalian cells, was assessed. The biocompatibility of the samples with MG-63 (osteoblast-like) cells was determined, as well as the antibacterial behavior against Gram-positive Staphylococcus carnosus and Gram-negative Escherichia coli bacteria. During cell biology tests, uncoated and PDA-coated samples showed biocompatibility, while cell viability on Ag-containing PDA-coated samples was reduced. On the other hand, antibacterial tests confirmed the strong antimicrobial properties of Ag-containing PDA-coated samples, although tailoring of the silver release will be necessary to modulate the dual effect of PDA and silver.

Metal-Organic-Framework-Based Enzymatic Microfluidic Biosensor via Surface Patterning and Biomineralization

Recently, the biomineralization of enzyme in metal-organic-framework (enzyme-MOF) composite have shown a great potential to increase enzymes stability without compromising their activity; hence, it is desirable for its applications in biosensing devices. Nonetheless, most of the enzyme-MOF research has been focusing on enzyme encapsulation in particle form, which limits its synthesis flexibility for practical applications because of its requirement for postsynthesis immobilization onto solid support. Therefore, to develop a diagnostic device out of the biomineralized enzyme, surface patterning and integration of microfluidic system offers many advantages. In this work, mussel-inspired polydopamine/polyethyleneimine (PDA/PEI) coating is employed to pattern enzyme-MOF in microfluidic channels and exploit the wettability gradient for "pumpless transportation" effect. As a proof of concept, we combine a cascade reaction of glucose oxidase (GOx) and horseradish peroxidase (HRP) enzymes to detect glucose into a patterned zeolitic imidazole framework-8 (ZIF-8) thin film on a flexible polymeric substrate. The results show that the ZIF-8/GOx&HRP in situ composites on PDA/PEI patterns have good acid and thermal stability compared with samples without ZIF-8. ZIF-8/GOx&HRP in situ shows high selectivity toward glucose, linear sensitivity of 0.00303 Abs/μM, and the limit of detection of 8 μM glucose concentration. An unexpected benefit of this approach is the ability of the ZIF-8 thin-film structure to provide a diffusion limiting effect for substrate influx, thus, producing high range of linear response range (8 μM to 5 mM of glucose). This work provides insights into the spatial location of the enzymes in MOF thin films and the potential of such patterning techniques for MOF-based biosensors using other types of biological elements such as antibodies and aptamers.

Antioxidant/Antibacterial Electrospun Nanocoatings Applied onto PLA Films

Polylactic acid (PLA) films were coated by coaxial electrospinning with essential and vegetable oils (clove and argan oils) and encapsulated into chitosan, in order to combine the biodegradability and mechanical properties of PLA substrates with the antimicrobial and antioxidant properties of the chitosan⁻oil nanocoatings. It has been established that the morphology of the electrospun nanocoatings mainly depend on the average molecular weight (MW) of chitosan. Oil beads, encapsulated into the main chitosan nanofibers, were obtained using high-MW chitosan (Chit-H). Oil encapsulated in chitosan naoparticles resulted when low-MW chitosan (Chit-L) was used. The coating layer, with a thickness of 100 ± 20 nm, had greater roughness for the samples containing Chit-H compared with the samples containing Chit-L. The coated PLA films had higher antibacterial activity when the nanocoating contained clove oil rather than when argan oil was used, for both types of chitosan. Nanocoatings containing Chit-H had higher antibacterial activity compared with those containing Chit-L, for both types of oil tested, due to the larger surface area of the rougher nanoscaled morphology of the coating layer that contained Chit-L. The chitosan⁻clove oil combination had higher antioxidant activity compared to the simple chitosan nanocoating, which confirmed their synergistic activities. The low activity of systems containing argan oil was explained by big differences between their chemical composition and viscosity.

Improved Anti-Biofouling Performance of Thin -Film Composite Forward-Osmosis Membranes Containing Passive and Active Moieties

Forward osmosis (FO) has gained increasing attention in desalination, wastewater treatment, and power generation. However, biofouling remains a major obstacle for the sustainable development of the FO process. Both passive and active strategies have been developed to mitigate membrane biofouling. A comprehensive understanding of different strategies and mechanisms has fundamental significance for the antifouling membrane development. In this study, thin-film composite (TFC) FO membranes were modified with polydopamine (PDA) coating as a passive antibacterial moiety and silver nanoparticles (Ag NPs) as an active antibacterial moiety. Their anti-biofouling performances were investigated both in static and dynamic conditions. In static exposure, the PDA-coated membranes exhibited great passive anti-adhesive property, and the Ag-NP-generated membranes presented both of excellent passive anti-adhesive properties and active antibacterial performance. While in dynamic cross-flow running conditions, Ag NPs effectively mitigated the membrane water flux decline due to their inhibition of biofilm growth, the PDA coating failed because of its inability to inactivate the attached bacteria growth. Moreover, Ag NPs were stable and active on membrane surfaces after 24 h of cross-flow operation. These findings provide new insights into the performances and mechanisms of passive and active moieties in the FO process.

Synthesis of a PEGylated Dopamine Ester with Enhanced Antibacterial and Antifungal Activity

Drug-polymer conjugation is a simple and efficient approach to synthesizing new, effective, and potent antimicrobial agents to counter the problem of microbial resistance. In the present study, a PEGylated dopamine ester (PDE) was synthesized using the PEGylation process and synthesis of PDE was confirmed by Fourier-transform infrared spectroscopy, elemental analysis (CHNS-O), and atomic force microscopy techniques. Later, the antimicrobial activity of PDE was assessed against four strains of bacteria (Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa, and Proteus vulgaris; Gram (-)) and two fungi (Aspergillus niger and Aspergillus fumigatus) by the agar well diffusion method. The minimum inhibitory concentration (MIC) of PDE was also determined by the broth dilution method against bacteria. PDE showed significant zones of inhibition ranged from 21 to 27 mm for bacteria and 16 to 20 mm for fungi under study, which were much higher than those for dopamine hydrochloride. MIC values of PDE showed its potential antimicrobial property.

Antimicrobial Porous Surfaces Prepared by Breath Figures Approach

Herein, efficient antimicrobial porous surfaces were prepared by breath figures approach from polymer solutions containing low content of block copolymers with high positive charge density. In brief, those block copolymers, which were used as additives, are composed of a polystyrene segment and a large antimicrobial block bearing flexible side chain with 1,3-thiazolium and 1,2,3-triazolium groups, PS54-b-PTTBM-M44, PS54-b-PTTBM-B44, having different alkyl groups, methyl or butyl, respectively. The antimicrobial block copolymers were blended with commercial polystyrene in very low proportions, from 3 to 9 wt %, and solubilized in THF. From these solutions, ordered porous films functionalized with antimicrobial cationic copolymers were fabricated, and the influence of alkylating agent and the amount of copolymer in the blend was investigated. Narrow pore size distribution was obtained for all the samples with pore diameters between 5 and 11 µm. The size of the pore decreased as the hydrophilicity of the system increased; thus, either as the content of copolymer was augmented in the blend or as the copolymers were quaternized with methyl iodide. The resulting porous polystyrene surfaces functionalized with low content of antimicrobial copolymers exhibited remarkable antibacterial efficiencies against Gram positive bacteria Staphylococcus aureus, and Candida parapsilosis fungi as microbial models.

Surface microstructure engenders unusual hydrophobicity in phyllosilicates

We present a mechanism of intriguing polar hydrophobicity of a series of naturally formed minerals: their surface cavities can effectively trap water molecules, and the water trapping remarkably disrupts the hydrogen bond interaction among interfacial water and leads to considerable hydrophobicity. Diminishing water trapping by decreasing surface roughness can considerably enhance wettability, which illustrates that a Wenzel model is no longer valid for polar materials with atomic-scale roughness.

Coupling Plant-Derived Cyclotides to Metal Surfaces: An Antibacterial and Antibiofilm Study

Modification of metal surfaces with antimicrobial peptides is a promising approach to reduce bacterial adhesion. Here, cyclic peptides or cycloids, possessing remarkable stability and antimicrobial activities, were extracted and purified from Viola philippica Cav., and identified using mass spectrometry. Cyclotides were subsequently utilized to modify stainless steel surfaces via polydopamine-mediated coupling. The resulting cyclotide-modified surfaces were characterized by Fourier transform infrared (FTIR) spectroscopy and contact angle analysis. The antibacterial capacity of these cyclotides against Staphylococcus aureus was assessed by Alamar blue assay. The antibiofilm capacity of the modified surfaces was assessed by crystal violet assay, and scanning electron microscopy (SEM). A composite of Kalata b1, Varv A, Viba 15 and Viba 17 (P1); Varv E (P2); and Viphi G (P3) were isolated and identified. FTIR analysis of the modified surfaces demonstrated that cyclotides bound to the surfaces and induced reduction of contact angles. Antimicrobial effects showed an order P3 > P1 and P2, with P3-treated surfaces demonstrating the strongest antibiofilm capacity. SEM confirmed reduced biofilm formation for P3-treated surfaces. This study provides novel evidence for cyclotides as a new class for development of antibacterial and antibiofilm agents.

Investigation of the antibiofilm capacity of peptide-modified stainless steel

Biofilm formation on surfaces is an important research topic in ship tribology and medical implants. In this study, dopamine and two types of synthetic peptides were designed and attached to 304 stainless steel surfaces, aiming to inhibit the formation of biofilms. A combinatory surface modification procedure was applied in which dopamine was used as a coupling agent, allowing a strong binding ability with the two peptides. X-ray photoelectron spectroscopy (XPS), elemental analysis, contact angle measurement and surface roughness test were used to evaluate the efficiency of the peptide modification. An antibiofilm assay against Staphylococcus aureus was conducted to validate the antibiofilm capacity of the peptide-modified stainless steel samples. XPS analysis confirmed that the optimal dopamine concentration was 40 µg ml^-1 in the coupling reaction. Element analysis showed that dopamine and the peptides had bound to the steel surfaces. The robustness assay of the modified surface demonstrated that most peptide molecules had bound on the surface of the stainless steel firmly. The contact angle of the modified surfaces was significantly changed. Modified steel samples exhibited improved antibiofilm properties in comparison to untreated and dopamine-only counterpart, with the peptide 1 modification displaying the best antibiofilm effect. The modified surfaces showed antibacterial capacity. The antibiofilm capacity of the modified surfaces was also surface topography sensitive. The steel sample surfaces polished with 600# sandpaper exhibited stronger antibiofilm capacity than those polished with other types of sandpapers after peptide modification. These findings present valuable information for future antifouling material research.

Determination of fermentable sugars in beer wort by gold nanoparticles@polydopamine: A layer-by-layer approach for Localized Surface Plasmon Resonance measurements at fixed wavelength

Polydopamine decorated in-situ with Localized Surface Plasmon Resonance (LSPR)-active gold nanoparticles (AuNPs) may extend the applicability of nanoplasmonic materials to original and innovative applications in several fields. Here we report the modification of disposable UV-Vis polystyrene cuvettes with AuNPs@PDA for refractive index LSPR-based measurements. An original layer-by-layer deposition method of PDA followed by AuNPs growth is here developed, showing linear correlation between PDA thickness and optical properties. In particular, the modulation from wavelength sensitivity toward absorbance sensitivity is obtained, allowing measurements at fixed wavelength (578 nm). As applicative example of the photonic cuvettes, the measurement of fermentable sugars in beer wort is here reported. The analytical performance of our approach has been directly compared to portable refractometer of reference, displaying excellent results in terms of the precise estimation of sugars in beer wort (expressed in degrees Brix), reproducibility and sensitivity. The approach may be extended to other materials of interest in LSPR based optical sensors, e.g. optical fibers.

Mussel-inspired facile synthesis of Fe/Co-polydopamine complex nanospheres: complexation mechanism and application of the carbonized hybrid nanospheres as an efficient bifunctional electrocatalyst

A one-pot synthesis of Co(ii)–Fe(iii)–PDA complex nanospheres as a facile approach to obtain binary metal-doped carbon nanostructures.

Polydopamine films change their physicochemical and antimicrobial properties with a change in reaction conditions

The present finding provides insight into the different chemistry, morphologies and properties of the designed polydopamine films with controlled antibacterial/antifouling properties.

Probing polydopamine adhesion to protein and polymer films: microscopic and spectroscopic evaluation

Polydopamine has been found to be a biocompatible polymer capable of supporting cell growth and attachment, and to have antibacterial and antifouling properties. Together with its ease of manufacture and application, it ought to make an ideal biomaterial and function well as a coating for implants. In this paper, atomic force microscope was used to measure the adhesive forces between polymer-, protein- or polydopamine-coated surfaces and a silicon nitride or polydopamine-functionalised probes. Surfaces were further characterised by contact angle goniometry, and solutions by circular dichroism. Polydopamine was further characterised with infrared spectroscopy and Raman spectroscopy. It was found that polydopamine functionalisation of the atomic force microscope probe significantly reduced adhesion to all tested surfaces. For example, adhesion to mica fell from 0.27 ± 0.7 to 0.05 ± 0.01 nN nm-1. The results suggest that polydopamine coatings are suitable to be used for a variety of biomedical applications.

Cross-Linking of a Hydrophilic, Antimicrobial Polycation toward a Fast-Swelling, Antimicrobial Superabsorber and Interpenetrating Hydrogel Networks with Long Lasting Antimicrobial Properties

A hemocompatible, antimicrobial 3,4en-ionene (PBI) derived by polyaddition of trans-1,4-dibromo-2-butene and N,N,N',N'-tetramethyl-1,3-propanediamine was cross-linked via its bromine end groups using tris(2-aminoethyl)amine (TREN) to form a fast-swelling, antimicrobial superabsorber. This superabsorber is taking up the 30-fold of its weight in 60 s and the granulated material is taking up 96-fold of its weight forming a hydrogel. It fully prevents growth of the bacterium Staphylococcus aureus. The PBI network was swollen with 2-hydroxyethyl acrylate and glycerol dimethacrylate followed by photopolymerization to form an interpenetrating hydrogel (IPH) with varying PBI content in the range of 2.0 to 7.8 wt %. The nanophasic structure of the IPH was confirmed by atomic force microscopy and transmission electron microscopy. The bacterial cells of the nosocomial strains Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa are killed on the IPH even at the lowest PBI concentration. The antimicrobial activity was retained after washing the hydrogels for up to 4 weeks. The IPHs show minor leaching of PBI far below its antimicrobial active concentration using a new quantitative test for PBI detection in solution. This leaching was shown to be insufficient to form an inhibition zone and killing bacterial cells in the surroundings of the IPH.

Polydopamine-collagen complex to enhance the biocompatibility of polydimethylsiloxane substrates for sustaining long-term culture of L929 fibroblasts and tendon stem cells

Polydimethylsiloxane (PDMS) is a commercialized polymer extensively used in the fabrication of versatile microfluidic microdevices for studies in cell biology and tissue engineering. However, the inherent surface hydrophobicity of PDMS is not optimal for cell culture and thus restrains its applications for investigation of long-term behaviors of fibroblasts and stem cells. To improve the surface biocompatibility of PDMS, a facile technique was developed by modifying the PDMS surface with polydopamine-collagen (COL/PDA) complex. The successful synthesis of COL/PDA was verified through proton nuclear magnetic resonance spectroscopy. Compared to surface coating solely with COL or PDA, the surface wettability was significantly improved on COL/PDA-modified PDMS substrates based on water contact angle characterizations. The modified PDMS surface remarkably enhanced the initial adhesion and long-term proliferation of L929 fibroblasts and tendon stem cells (TSCs). Additionally, the effects of COL/PDA coating on cell viability and apoptosis were further investigated under prolonged incubation. We found that the COL/PDA coating on PDMS resulted in a substantial increase of cell viability compared to native PDMS, and the cell apoptosis was considerably impeded on the modified PDMS. This study demonstrated that COL/PDA coating can effectively enhance the surface biocompatibility of PDMS as verified by the enhanced adhesion and long-term proliferation of L929 fibroblasts and TSCs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 408-418, 2018.

Construction of Functional Coatings with Durable and Broad-Spectrum Antibacterial Potential Based on Mussel-Inspired Dendritic Polyglycerol and in Situ-Formed Copper Nanoparticles

A novel surface coating with durable broad-spectrum antibacterial ability was prepared based on mussel-inspired dendritic polyglycerol (MI-dPG) embedded with copper nanoparticles (Cu NPs). The functional surface coating is fabricated via a facile dip-coating process followed by in situ reduction of copper ions with a MI-dPG coating to introduce Cu NPs into the coating matrix. This coating has been demonstrated to possess efficient long-term antibacterial properties against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and kanamycin-resistant E. coli through an "attract-kill-release" strategy. The synergistic antibacterial activity of the coating was shown by the combination of two functions of the contact killing, reactive oxygen species production and Cu ions released from the coating. Furthermore, this coating inhibited biofilm formation and showed good compatibility to eukaryotic cells. Thus, this newly developed Cu NP-incorporated MI-dPG surface coating may find potential application in the design of antimicrobial coating, such as implantable devices.

Surface Modification of Poly(dimethylsiloxane) with Polydopamine and Hyaluronic Acid To Enhance Hemocompatibility for Potential Applications in Medical Implants or Devices

Poly(dimethylsiloxane) (PDMS) has been widely utilized in micro-electromechanical systems (MEMS) and implantable devices. To improve the hemocompatibility of a PDMS-based implant, a facile technique was developed by modifying PDMS with a hyaluronic acid (HA) and polydopamine (PDA) composite (HA/PDA). Under appropriate ratio of HA to PDA, platelet adhesion and activation were considerably reduced on modified PDMS substrates, indicating an enhanced hemocompatibility compared to native PDMS or those coated with HA or PDA solely. HA/PDA coating also posed minimal cytotoxicity on the adhesion and proliferation of endothelial cells (HUVECs). The anti-inflammation effect of the modified PDMS surface was characterized based on the expression of critical cytokines in adherent macrophages. This study revealed that the hemocompatibility, cytotoxicity, and anti-inflammation properties could be tailored conveniently by adjusting the ratio of HA and PDA composite on the modified PDMS surface, which has an exceptional potential as the core or packaging material for constructing implantable devices in biomedical applications.

Synergistic Bacteria Killing through Photodynamic and Physical Actions of Graphene Oxide/Ag/Collagen Coating

Researchers have widely agreed that the broad spectrum antibacterial activity of silver nanoparticles (AgNPs) can be predominantly ascribed to the action of Ag⁺. This study marks the first report detailing the rapid and highly efficient synergistic bacteria killing of AgNPs, which is achieved by inspiring AgNPs' strong photocatalytic capability to rapidly produce radical oxygen species using 660 nm visible light together with the innate antimicrobial ability of Ag⁺. These AgNPs were uniformly distributed into well-defined graphene oxide (GO) nanosheets through an in situ reduction of Ag⁺ and subsequently wrapped with a thin layer of type I collagen. In vivo subcutaneous tests demonstrated that 20 min irradiation of 660 nm visible light could achieve a high antibacterial efficacy of 96.3% and 99.4% on the implant surface against Escherichia coli and Staphylococcus aureus, respectively. In addition, the collagen could reduce the coatings' possible cytotoxicity. The results of this work can provide a highly effective and universal GO-based bioplatform for combination with inorganic antimicrobial NPs (i.e., AgNPs) with excellent photocatalytic properties, which can be utilized for facile and rapid in situ disinfection, as well as long-term prevention of bacterial infection through the synergistic bacteria killing of both 660-nm light-inspired photodynamic action and their innate physical antimicrobial ability.

Nontoxic Cationic Coumarin Polyester Coatings Prevent Pseudomonas aeruginosa Biofilm Formation

The rapid increase in bacterial infections and antimicrobial resistance is a growing public health concern. Infections arising from bacterial contamination of surgical tools, medical implants, catheters, and hospital surfaces can potentially be addressed by antimicrobial polymeric coatings. The challenge in developing such polymers for in vivo use is the ability to achieve high antimicrobial efficacy while at the same time being nontoxic to human cells. Although several classes of antimicrobial polymers have been developed, many of them cannot be used in the clinical setting due to their nonselective toxicity toward bacteria and mammalian cells. Here, we demonstrate that coumarin polyesters with cationic pendant groups are very effective against Gram negative Pseudomonas aeruginosa. Coumarin polyesters with pendant cationic amine groups were coated onto glass coverslips and tested for their antimicrobial activity against P. aeruginosa colonization of the surface. The results demonstrate that the cationic coumarin polyester kills the surface attached bacterial cells preventing biofilm formation but does not show any hemolytic activity or discernible toxicity toward mammalian cells. The antimicrobial polyesters described in this work have several advantages desired in antimicrobial coatings such as high antimicrobial activity, low toxicity toward mammalian cells, visualization and ease of synthesis and fabrication, all of which are necessary for translation to the clinic.

Fabrication of core–shell Ag@pDA@HAp nanoparticles with the ability for controlled release of Ag+and superior hemocompatibility

We report a convenient and effective method to prepare Ag-NPs and core–shell Ag@pDA@HAp-NPs.

Mussel-inspired polydopamine for bio-surface functionalization

Surface functionalization via molecular design has been a key approach to incorporate new functionalities into existing biomaterials for biomedical application. Mussel-inspired polydopamine (PDA) has aroused great interest as a new route to the functionalization of biomaterials, due to its simplicity and material independency in deposition, favorable interactions with cells, and strong reactivity for secondary functionalization. Herein, this review attempts to highlight the recent findings and progress of PDA in bio-surface functionalization for biomedical applications. The efforts made to elucidate the polymerization mechanism, PDA structure, and the preparation parameters have been discussed. Interactions between PDA coatings and the various cell types involved in different biomedical applications including general cell adhesion, bone regeneration, blood compatibility, and antimicrobial activity have also been highlighted. A brief discussion of post-functionalization of PDA and nanostructured PDA is also provided.

In situ Immobilization of Copper Nanoparticles on Polydopamine Coated Graphene Oxide for H2O2 Determination

Nanostructured electrochemical sensors often suffer from irreversible aggregation and poor adhesion to the supporting materials, resulting in reduced sensitivity and selectivity over time. We describe a versatile method for fabrication of a H₂O₂ sensor by immobilizing copper nanoparticles (Cu NPs; 20 nm) on graphene oxide (GO) sheets via in-situ reduction of copper(II) on a polydopamine (PDA) coating on a glassy carbon electrode. The PDA film with its amino groups and catechol groups acts as both a reductant and an adhesive that warrants tight bonding between the Cu NPs and the support. The modified electrode, best operated at a working voltage of −0.4 V (vs. Ag/AgCl), has a linear response to H₂O₂ in the 5 μM to 12 mM concentration range, a sensitivity of 141.54 μA∙mM‾¹∙cm‾², a response time of 4 s, and a 1.4 μM detection limit (at an S/N ratio of 3). The sensor is highly reproducible and selective (with minimal interference to ascorbic acid and uric acid). The method was applied to the determination of H₂O₂ in sterilant by the standard addition method and gave recoveries between 97% and 99%.