Controlled water vapor transmission rate promotes wound-healing via wound re-epithelialization and contraction enhancement

Chitosan-Gelatin Films Cross-Linked with Dialdehyde Cellulose Nanocrystals as Potential Materials for Wound Dressings

In this study, thin chitosan-gelatin biofilms cross-linked with dialdehyde cellulose nanocrystals for dressing materials were received. Two types of dialdehyde cellulose nanocrystals from fiber (DNCL) and microcrystalline cellulose (DAMC) were obtained by periodate oxidation. An ATR-FTIR analysis confirmed the selective oxidation of cellulose nanocrystals with the creation of a carbonyl group at 1724 cm⁻¹. A higher degree of cross-linking was obtained in chitosan-gelatin biofilms with DNCL than with DAMC. An increasing amount of added cross-linkers resulted in a decrease in the apparent density value. The chitosan-gelatin biofilms cross-linked with DNCL exhibited a higher value of roughness parameters and antioxidant activity compared with materials cross-linked with DAMC. The cross-linking process improved the oxygen permeability and anti-inflammatory properties of both measurement series. Two samples cross-linked with DNCL achieved an ideal water vapor transition rate for wound dressings, CS-Gel with 10% and 15% addition of DNCL—8.60 and 9.60 mg/cm²/h, respectively. The swelling ability and interaction with human serum albumin (HSA) were improved for biofilms cross-linked with DAMC and DNCL. Significantly, the films cross-linked with DAMC were characterized by lower toxicity. These results confirmed that chitosan-gelatin biofilms cross-linked with DNCL and DAMC had improved properties for possible use in wound dressings.

Silk Fibroin-Based Bioengineered Scaffold for Enabling Hemostasis and Skin Regeneration of Critical-Size Full-Thickness Heat-Induced Burn Wounds

Millions of people around the globe are affected by full-thickness skin injuries. A delay in the healing of such injuries can lead to the formation of chronic wounds, posing several clinical and economic challenges. Current strategies for wound care aim for skin regeneration and not merely skin repair or faster wound closure. The present study aimed to develop a bioactive wound-healing matrix comprising natural biomaterial silk fibroin (SF), clinical-grade human fibrin (FIB), and human hyaluronic acid (HA), resulting in SFFIBHA for regeneration of full-thickness burn wounds. A porous, hemostatic, self-adhesive, moisture-retentive, and biomimetic scaffold that promotes healing was the expected outcome. The study validated a terminal sterilization method, suggesting the stability and translational potential of the novel scaffold. Also, the study demonstrated the regenerative abilities of scaffolds using in vitro cell culture experiments and in vivo full-thickness burn wounds of critical size (4 cm × 4 cm) in a rabbit model. Under in vitro conditions, the scaffold enhanced primary dermal fibroblast adhesion and cell proliferation with regulated extracellular matrix (ECM) synthesis. In vivo, the scaffolds promoted healing with mature epithelium coverage involving intact basal cells, superficial keratinocytes, multilayers of keratohyalin, dermal regeneration with angiogenesis, and deposition of remodeled ECM in 28 days. The relative gene expression of the IL6 marker indicated transitions from inflammation to proliferation stage. In addition, we observed skin appendages and rete peg development in the SFFIBHA-treated wound tissues. Although wound closure was observed, neither negative (untreated/sham) nor positive (commercially available product; NeuSkin) control wounds developed skin appendages/rete pegs or native skin architecture. After 56 days, healing with organized ECM production enabled the recovery of mechanical properties of skin with higher tissue maturity in SFFIBHA-treated wounds. Thus, in a single application, the SFFIBHA scaffold proved to be an efficient biomimetic matrix that can guide burn wound regeneration. The developed matrix is a suture-less, hemostatic, off-the-shelf product for potential wound regenerative applications.

BioFiber: An advanced fibrous textured dressing to manage exudate in severe wounds

Biofiber is a new generation of highly absorbent, and textured bandage with patented fiber technology. Biofiber has a sophisticated texture that provides an optimum balance of moisture, flexibility, and conformability, and it has been developed with specific properties to treat complex injuries like burns. The dressing has been designed to be completely adaptable to human anatomy, and it can be fitted to any part of the body, adapting to all curves and jointures, as well as fitting the facial features. Prototypes of PLA-PCL-based textured bandages were developed by electrospinning, characterized, and evaluated for complex wound care. The texture is both esthetic and functional; fibers were uniformly sized (2.2 ± 0.8 and 4.5 ± 0.3 µm) and well interconnected. The texture facilitates vertical absorption of exudate up to 2.5 g/g of bandage, and the high contact angle values (120 - 100°) create an optimum balance of moisture for the healing process. The textured prototypes turned out to be extremely stable; no sign of bandage debris was found by the standard test, BS EN 13726-1.7. In addition, the round texture (3R) showed improvements in tensile strength (0.27 ± 0.019 MPa), ultimate tensile strength (0.83 ± 0.05 MPa) with higher breaking point (0.91 ± 0.05 MPa) compared to control (Mepilex Lite®). The amount of albumin (BSA) and Fibrinogen (Fb) adhered on textured fiber prototypes was calculated by BCA Assay, all prototypes demonstrated strong BSA (ranging from 81.66 ± 8.93 to 182.73 ± 2.07 μg protein/mg dressing) and enhanced Fb shielding (ranging from 108.25 ± 7.3 to 238.12 ± 17.76 μg protein/mg dressing). Their MVTR values ranged from 2313.27 ± 58.86 to 2603.33 ± 50.41 g/m²· day and vertical wicking heights were between 24.6 ± 2.5 and 29.3 ± 4.1 mm; biological tests demonstrated good compatibility of prototypes (cell vitality > 70 %), percentage of cells attachment was in-between 114 and 225 %. The extent of attachment depends on texture, differing topographical patterns presented higher attachment compared with both CTR + and 1P prototype (no texture). Cells were growth on textured fiber prototypes, and the extent of proliferation depend on incubation time.

Insights into the Design of Polyurethane Dressings Suitable for the Stages of Skin Wound-Healing: A Systematic Review

Dressings made with polyurethanes have been found to exhibit good and varied biological properties that make them good candidates for this application. However, as has been seen, the wound-healing process is complex, which includes four different stages. So far, the design and evaluation of polyurethane for wound dressing has focused on achieving good properties (mechanical, physicochemical, and biological), but each of them separates from the others or even directed at only one of the stages of skin wound-healing. Therefore, the aim of this systematic review is to explore the applications of polyurethanes in wound dressings and to determine whether could be designed to cover more than one stage of skin wound-healing. The PRISMA guidelines were followed. The current research in this field does not consider each stage separately, and the design of polyurethane dressings is focused on covering all the stages of wound healing with a single material but is necessary to replace polyurethanes in short periods of time. Additionally, little emphasis is placed on the hemostasis stage and further characterization of polyurethanes is still needed to correlate mechanical and physicochemical properties with biological properties at each stage of the wound-healing. Current research demonstrates an effort to characterize the materials physiochemically and mechanically, but in terms of their biological properties, most of the literature is based on the performance of histological tests of explants morphologically probing the compromised tissues, which give an indication of the potential use of polyurethanes in the generation of wound-healing dressings.

In vitro and in vivo evaluation of nanofibre mats containing Calendula officinalis extract as a wound dressing

OBJECTIVE

The present study aims to create Calendula officinalis-loaded nanofibre-based wound dressing materials to enhance the wound healing process. Calendula officinalis is an annual herb native to the Mediterranean region. It is antipyretic, antifungal, antioedema, antidiabetic, anti-inflammatory (wound, oral and pharyngeal mucosa), antispasmodic, treats chronic ocular surface diseases, acts as a stimulant and a diaphoretic. It is also used in the prevention of acute dermatitis, and in the treatment of gastrointestinal ulcers, wounds and burns.

METHOD

Electrospinning is an effective method for creating nano- and microfibres for biomedical applications. Calendula officinalis (CA) of various concentrations 5%, 10% and 15%)-loaded polyvinyl alcohol (PVA)/sodium alginate (SAlg) nanofibre mats were successfully produced via blend electrospinning. Nanofibre mats were evaluated using: scanning electron microscopy (SEM); Fourier transform infrared spectroscopy (FTIR) analysis; gel content; water vapour transmission rate (WVTR); swelling ratio; in vitro drug release studies; viability evaluation (cell culture and MTT assay); and an in vivo study using male Wistar rats. Rats were divided into three groups (n=3). In each group, rats were inflicted with five full-thickness wounds on the back and were treated with sterile gauze (control), PVA/SAlg nanofibre dressing (CA-free control), PVA/SAlg/CA5%, PVA/SAlg/CA10%, and PVA/SAlg/CA15% nanofibre dressing.

RESULTS

Results showed that the obtained fibres were smooth with no surface aggregates, indicating complete incorporation of Calendula officinalis. The release of Calendula officinalis from loaded PVA/SAlg fibre mats in the first four hours was burst released and then was constant. PVA/SAlg and PVA/SAlg/CA nanofibres were not toxic to L929 mouse fibroblasts and supported cell attachment and proliferation. The results of the in vivo study showed that the PVA/SAlg/CA10% nanofibre dressing had a higher full-thickness wound healing closure rate compared with the control group on days seven, 14 and 21 after treatment.

CONCLUSION

The results of this evaluation showed that PVA/SAlg/CA nanofibrous mats could be a candidate as an effective wound dressing; however, the percentage of CA in this compound needs further investigation.

Commercial wound dressings for the treatment of exuding wounds: an in-depth physico-chemical comparative study

Background

Nowadays, a wide range of wound dressings is already commercially available. The selection of the dressing is of paramount importance as inappropriate wound management and dressing selection can delay the wound healing process. Not only can this be distressing for the patient, but it can also contribute to complications such as maceration and subsequent infection. Many researchers are targeting the design of dressings with superior properties over existing commercial dressings. However, reported results in the state-of-the-art are rarely benchmarked against commercial dressings. The aim of this study was to determine several characteristics of a large variety of the most frequently used commercial wound dressings, providing an overview for both practitioners and researchers.

Methods

For this comparative study, 11 frequently used commercial wound dressings were selected, representing the different types. The morphology was studied using scanning electron microscopy. The dressings were characterized in terms of swelling capacity (water, phosphate buffered saline and simulated wound fluid), moisture vapour transmission rate (MVTR) and moisture uptake capacity (via dynamic vapour sorption) as well as mechanical properties using tensile testing and texturometry.

Results

The selected dressings showed distinctive morphological differences (fibrous, porous and/or gel) which was reflected in the different properties. Indeed, the swelling capacities ranged between 1.5 and 23.2 g/g (water), 2.1 and 17.6 g/g (phosphate buffered saline) or 2.9 and 20.8 g/g (simulated wound fluid). The swelling capacity of the dressings in water increased even further upon freeze-drying, due to the formation of pores. The MVTR values varied between 40 and 930 g/m²/24 h. The maximal moisture uptake capacity varied between 5.8% and 105.7% at 95% relative humidity. Some commercial dressings exhibited a superior mechanical strength, due to either being hydrophobic or multi-layered.

Conclusions

The present work not only offers insight into a valuable toolbox of suitable wound dressing characterization techniques, but also provides an extensive landscaping of commercial dressings along with their physico-chemical properties, obtained through reproducible experimental protocols. Furthermore, it ensures appropriate benchmark values for commercial dressings in all forthcoming studies and could aid researchers with the development of novel modern wound dressings. The tested dressings either exhibited a high strength or a high swelling capacity, suggesting that there is still a strong potential in the wound dressings market for dressings that possess both.

An asymmetric wettable PCL/chitosan composite scaffold loaded with IGF-2 for wound dressing

An effective dressing is essential for wound healing. In fact, the wettability performance is one of the most important factors of a wound dressing. The fundamental functions of a wound dressing involve the absorption of excess exudates and maintenance of optimal moisture at the wound by controlling water evaporation. Here, we designed a type of chitosan (CS) sponge and PCL nanofibrous membrane composite dressing with asymmetric wettability surfaces as wound healing materials for biomedical applications. The hydrophobic surfaces of the composite dressing were waterproof and could efficiently control the water vapor transmission rate, whereas the hydrophilic surface of the CS sponge had good cytocompatibility and water-absorbing capability. Insulin-like growth factor-2 (IGF-2) was added to the CS sponge, and exhibited a stimulatory effect on fibroblasts migration and proliferation. Therefore, the fabricated CS sponge and PCL membrane composite dressing had excellent cytocompatibility, vapor transmission rate, and liquid absorption and asymmetric wettability, suggesting its potential as a promising alternative to traditional wound dressing.

Active Potential of Bacterial Cellulose-Based Wound Dressing: Analysis of Its Potential for Dermal Lesion Treatment

The use of innate products for the fast and efficient promotion of healing process has been one of the biomedical sector's main bets for lesion treatment modernization process. The aim of this study was to develop and characterize bacterial cellulose-based (BC) wound dressings incorporated with green and red propolis extract (2 to 4%) and the active compounds p-coumaric acid and biochanin A (8 to 16 mg). The characterization of the nine developed samples (one control and eight active wound dressings) evidenced that the mechanics, physics, morphological, and barrier properties depended not only on the type of active principle incorporated onto the cellulosic matrix, but also on its concentration. Of note were the results found for transparency (28.59-110.62T₆₀₀ mm^-1), thickness (0.023-0.046 mm), swelling index (48.93-405.55%), water vapor permeability rate (7.86-38.11 g m² day^-1), elongation (99.13-262.39%), and antioxidant capacity (21.23-86.76 μg mL^-1). The wound dressing based on BC and red propolis was the only one that presented antimicrobial activity. The permeation and retention test revealed that the wound dressing containing propolis extract presented the most corneal stratum when compared with viable skin. Overall, the developed wound dressing showed potential to be used for treatment against different types of dermal lesions, according to its determined proprieties.

Orchestrating the Dermal/Epidermal Tissue Ratio during Wound Healing by Controlling the Moisture Content

A balanced and moist wound environment and surface increases the effect of various growth factors, cytokines, and chemokines, stimulating cell growth and wound healing. Considering this fact, we tested in vitro and in vivo water evaporation rates from the cellulose dressing epicite^hydro when combined with different secondary dressings as well as the resulting wound healing efficacy in a porcine donor site model. The aim of this study was to evaluate how the different rates of water evaporation affected wound healing efficacy. To this end, epicite^hydro primary dressing, in combination with different secondary dressing materials (cotton gauze, JELONET^◊, AQUACEL^® Extra ™, and OPSITE^◊ Flexifix), was placed on 3 × 3 cm-sized dermatome wounds with a depth of 1.2 mm on the flanks of domestic pigs. The healing process was analyzed histologically and quantified by morphometry. High water evaporation rates by using the correct secondary dressing, such as cotton gauze, favored a better re-epithelialization in comparison with the low water evaporation resulting from an occlusive secondary dressing, which favored the formation of a new and intact dermal tissue that nearly fully replaced all the dermis that was removed during wounding. This newly available evidence may be of great benefit to clinical wound management.

Bacterial Cellulose—Adaptation of a Nature-Identical Material to the Needs of Advanced Chronic Wound Care

Modern wound treatment calls for hydroactive dressings. Among the variety of materials that have entered the field of wound care in recent years, the carbohydrate polymer bacterial cellulose (BC) represents one of the most promising candidates as the biomaterial features a high moisture-loading and donation capacity, mechanical stability, moldability, and breathability. Although BC has already gained increasing relevance in the treatment of burn wounds, its potential and clinical performance for “chronic wound” indications have not yet been sufficiently investigated. This article focuses on experimental and clinical data regarding the application of BC within the indications of chronic, non-healing wounds, especially venous and diabetic ulcers. A recent clinical observation study in a chronic wound setting clearly demonstrated its wound-cleansing properties and ability to induce healing in stalling wounds. Furthermore, the material parameters of BC dressings obtained through the static cultivation of Komagataeibacter xylinus were investigated for the first time in standardized tests and compared to various advanced wound-care products. Surprisingly, a free swell absorptive capacity of a BC dressing variant containing 97% moisture was found, which was higher than that of alginate or even hydrofiber dressings. We hypothesize that the fine-structured, open porous network and the resulting capillary forces are among the main reasons for this unexpected result.

Wound dressing adherence: a review

Wound dressing adherence is an important problem that is frequently encountered in wound care, and is associated with both clinical and economic burdens. However, only a few review articles have focused on this issue. The objective of this review was to present a comprehensive discussion of wound dressing adherence, including the mechanism of dressing adherence, adverse consequences (clinical burdens and economic burdens), factors affecting adherence (dressing-, patient- and wound-related factors, and factors related to the wound care procedure), tests to assess dressing adherence (in vitro assay, in vivo assay and clinical trials), and reduction of wound adherence (modification of dressing adherence and special care in particular patients). Accordingly, this review article emphasises an awareness of dressing adherence, and is intended to be an informative source for the development of new dressings and for wound management.

Efficacy of a fine fiber film applied with a water-based lotion to improve dry skin

BACKGROUND

Dry skin can trigger eczema that affects >10% of the US population. Dressing films have been developed to improve diseased skin, but there is limited knowledge about their effects, especially for dry skin-related symptoms. We developed an electrospinning method that creates a coating film, called a fine fiber (FF) film, characterized by the production of a transparent, thin, flexible, and adherent membrane on the skin surface.

OBJECTIVE

The aim of this pilot study was to examine the effects of the FF film on dry skin.

METHODS

Three treatments (lotion only, lotion with the FF film, and lotion with an alternative film) were designed to treat subjects with rough skin on their lower legs. Twenty-four females were enrolled and used either a water-based lotion U or a petrolatum-based lotion P and the FF film for 2 weeks followed by a regression phase for 1 week. Skin hydration and roughness scores were assessed as were the subjects' perceptions of the effects.

RESULTS

When the FF film was applied with lotion U, skin hydration was significantly improved even after 1 week, accompanied by a significant improvement of skin roughness and an increase in skin hydration by the end of the regression phase. An evaluation of moisture permeability suggested that the FF film, especially with lotion U, performed as a semipermeable membrane with optimal moisture healing effects on dry skin.

CONCLUSION

The FF film together with a water-based lotion is a promising treatment to quickly improve dry skin conditions.

Composite Fish Collagen-Hyaluronate Based Lyophilized Scaffolds Modified with Sodium Alginate for Potential Treatment of Chronic Wounds

Chronic wounds are characterized by both decreased collagen deposition and increased collagen breakdown. It is reasonable to hypothesize that exogenous collagen can potentially promote wound healing by reducing degradation enzymes in the wound environment and disrupting the cycle of chronicity. Therefore, this study aimed to develop an optimal combination of fish collagen (FCOL), sodium alginate (SA), and hyaluronic acid (HA) loaded with bovine serum albumin (BSA) as a model protein fabricated as lyophilized scaffolds. The effects of sodium alginate (SA#) with higher mannuronic acid (M) were compared to sodium alginate (SA*) with higher guluronic acid (G). The SA* with higher G resulted in elegant scaffolds with hardness ranging from 3.74 N−4.29 N that were able to withstand the external force due to the glycosidic bonds in guluronic acid. Furthermore, the high G content also had a significant effect on the pore size, pore shape, and porosity. The water absorption (WA) ranged from 380−1382 (%) and equilibrium water content (EWC) 79−94 (%) after 24 h incubation at 37 °C. The SA* did not affect the water vapor transmission rate (WVTR) but incorporating BSA significantly increased the WVTR making these wound dressing scaffolds capable of absorbing about 50% exudate from a heavily exuding chronic wound. The protein released from the composite systems was best explained by the Korsmeyer−Peppas model with regression R2 values ranging from 0.896 to 0.971 and slope or n < 0.5 indicating that the BSA release mechanism was governed by quasi-Fickian diffusion. Cell viability assay showed that the scaffolds did not inhibit the proliferation of human dermal fibroblasts and human epidermal keratinocytes, and are therefore biocompatible. In vitro blood analysis using human whole blood confirmed that the BSA-loaded SA*:FCOL:HA scaffolds reduced the blood clotting index (BCI) by up to 20% compared to a commercially available sponge for chronic wounds. These features confirm that SA*:FCOL:HA scaffolds could be applied as a multifunctional wound dressing.

Dual-Layered Approach of Ovine Collagen-Gelatin/Cellulose Hybrid Biomatrix Containing Graphene Oxide-Silver Nanoparticles for Cutaneous Wound Healing: Fabrication, Physicochemical, Cytotoxicity and Antibacterial Characterisation

Tissue engineering products have grown rapidly as an alternative solution available for chronic wound and burn treatment. However, some drawbacks include additional procedures and a lack of antibacterial properties that can impair wound healing, which are issues that need to be tackled effectively for better wound recovery. This study aimed to develop a functionalized dual-layered hybrid biomatrix composed of collagen sponge (bottom layer) to facilitate cell proliferation and adhesion and gelatin/cellulose hydrogel (outer layer) incorporated with graphene oxide and silver nanoparticles (GC-GO/AgNP) to prevent possible external infections post-implantation. The bilayer hybrid scaffold was crosslinked with 0.1% (w/v) genipin for 6 h followed by advanced freeze-drying technology. Various characterisation parameters were employed to investigate the microstructure, biodegradability, surface wettability, nanoparticles antibacterial activity, mechanical strength, and biocompatibility of the bilayer bioscaffold towards human skin cells. The bilayer bioscaffold exhibited favourable results for wound healing applications as it demonstrated good water uptake (1702.12 ± 161.11%), slow rate of biodegradation (0.13 ± 0.12 mg/h), and reasonable water vapour transmission rate (800.00 ± 65.85 gm−2 h−1) due to its porosity (84.83 ± 4.48%). The biomatrix was also found to possess hydrophobic properties (48.97 ± 3.68°), ideal for cell attachment and high mechanical strength. Moreover, the hybrid GO-AgNP promoted antibacterial properties via the disk diffusion method. Finally, biomatrix unravelled good cellular compatibility with human dermal fibroblasts (>90%). Therefore, the fabricated bilayer scaffold could be a potential candidate for skin wound healing application.

Preparation, biocompatibility, and wound healing effects of O-carboxymethyl chitosan nonwoven fabrics in partial-thickness burn model

This study was aimed at preparing O-carboxymethyl chitosan (CM-CTS) fabrics, and examining the wound healing effects on partial-thickness burn. The functional polysaccharides were produced from chitosan needle-punched nonwovens reacted with chloroacetic acid. Then the biocompatibility and biological functions were evaluated through fibroblast L-929 and SD rats. CM-CTS fabrics were obtained with elongation at break more than 42%, tensile strength reaching 0.65 N/mm², and water vapor transmission rate about 2600 g/m²∙24 h. Moreover, CM-CTS fabrics could effectively promote the mouse L-929 migration in vitro. CM-CTS fabrics yielded satisfactory results in angiogenesis, collagen deposition, interleukin-6 content, transforming growth factor level and healing rate, which were superior to the positive control and model groups after rats suffering with partial-thickness burn. In conclusion, CM-CTS fabrics possessed proper mechanical properties, air permeability, favorable biocompatibility, acceleration on fibroblasts migration and healing capacity for partial-thickness burn injury, and owned good potential as high-quality wound dressing.

Composite Membrane Dressings System with Metallic Nanoparticles as an Antibacterial Factor in Wound Healing

Wound management is the burning problem of modern medicine, significantly burdening developed countries’ healthcare systems. In recent years, it has become clear that the achievements of nanotechnology have introduced a new quality in wound healing. The application of nanomaterials in wound dressing significantly improves their properties and promotes the healing of injuries. Therefore, this review paper presents the subjectively selected nanomaterials used in wound dressings, including the metallic nanoparticles (NPs), and refers to the aspects of their application as antimicrobial factors. The literature review was supplemented with the results of our team’s research on the elements of multifunctional new-generation dressings containing nanoparticles. The wound healing multiple molecular pathways, mediating cell types, and affecting agents are discussed herein. Moreover, the categorization of wound dressings is presented. Additionally, some materials and membrane constructs applied in wound dressings are described. Finally, bacterial participation in wound healing and the mechanism of the antibacterial function of nanoparticles are considered. Membranes involving NPs as the bacteriostatic factors for improving wound healing of skin and bones, including our experimental findings, are discussed in the paper. In addition, some studies of our team concerning the selected bacterial strains’ interaction with material involving different metallic NPs, such as AuNPs, AgNPs, Fe₃O₄NPs, and CuNPs, are presented. Furthermore, nanoparticles’ influence on selected eukaryotic cells is mentioned. The ideal, universal wound dressing still has not been obtained; thus, a new generation of products have been developed, represented by the nanocomposite materials with antibacterial, anti-inflammatory properties that can influence the wound-healing process.

Antimicrobial Lignin-Based Polyurethane/Ag Composite Foams for Improving Wound Healing

Antimicrobial materials are an urgent need for modern wound care in the clinic. Although traditional polyurethane foams have proven to be clinically valuable for wound treatment, their petroleum-originated preparation and bioinert nature have restricted their efficacy in biomedical applications. Here, we propose a simple one-step foaming method to prepare lignin-based polyurethane foams (LPUFs) in which fully biobased polyether polyols partially replace traditional petroleum-based raw materials. The trace amount of phenolic hydroxyl groups (about 4 mmol) in liquefied lignin acts as a direct reducing agent and capping agent to silver ions (less than 0.3 mmol), in situ forming silver nanoparticles (Ag NPs) within the LPUF skeleton. This newly proposed lignin polyurethane/Ag composite foam (named as Ag NP-LPUF) shows improved mechanical, thermal, and antibacterial properties. It is worth mentioning that the Ag NP-LPUF exhibits more than 99% antibacterial rate against Escherichia coli within 1 h and Staphylococcus aureus within 4 h. Evaluations in mice indicate that the antimicrobial composite foams can effectively promote wound healing of full-thickness skin defects. As a proof of concept, this antibacterial and biodegradable foam exhibits significant potential for clinical translation in wound care dressings.

Development and Evaluation of Liquid Plaster Loaded with Chromolaena odorata Leaf Extract Endowed with Several Beneficial Properties to Wound Healing

Liquid plaster (LP) is a recently developed wound dressing product that can be used to cover wounds in various parts of the body, especially small injuries or wounds in body parts involved in movement. Given the benefits and applications of LP, this study aimed to develop and evaluate Chromolaena odorata extract-loaded LP with antimicrobial and hemostasis effects. The study was first conducted through the extraction of Choromolaena odorata leaf by using an ethanol maceration technique and identification of the compounds with high-performance liquid chromatography. The LP loaded with Chromolaena odorata extract demonstrates an ability to inhibit S. aureus and S. epidermidis at a MIC of 0.25 mg/mL and MBC of 0.5 mg/mL. The antioxidant activity test was performed by ABTS and DPPH methods demonstrating the free-radical scavenging activity of the extract. The blood clotting activity was established by varying the concentration of Choromolaena odorata leaf extract from 0.0625 mg/mL to 1 mg/mL. The formulation of the film-forming system was developed by varying the solvent, polymer, and plasticizer proportions. The optimum formulation displayed fast film-forming with high elasticity of the film. Moreover, the 20 mg/mL herbal extract-loaded LP provided an antibacterial effect with admissible water vapor transmission and low skin irritation. As a result, the study demonstrates the possibility of introducing the Chromolaena odorata extract-loaded LP to increase the effectiveness of wound healing and the antibacterial effect on the skin.

Fish-scale derived multifunctional nanofiber membrane for infected wound healing

The rapid development of modern medicine has put forward new requirements for wound infection healing methods in clinical treatment. Despite great achievements have been made in the research and development...

Modified montmorillonite-bacterial cellulose composites as a novel dressing system for pressure injury

The main objective of this study was to investigate the effects of bacterial cellulose hydrogel (BCH) incorporated into montmorillonite (MMT) and its underlying mechanisms of action on a skin wound healing mouse model following pressure injury model. Komagataeibacter hansenii was used to obtain 5 cm in diameter and 0.8 mm of thickness circular bacterial cellulose (BC) sheets, which were incorporated with MMT by deposition ex-site using a 0.1% MMT suspension (100 rpm for 24 h at 28 °C). Afterward, Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) were used to characterize the bacterial cellulose hydrogel incorporated into montmorillonite (BCH-MMT). The pressure injury model was assessed by macroscopic and histological analysis in male Swiss mice. Both, BC and BCH-MMT, showed a typical FTIR spectrum of cellulosic substrates with pronounces bands around 3344, 2920, 1637, and 1041 cm-1 while microparticles of MMT dispersed uniformly throughout BC were revealed by SEM photographs. Animals treated with BCH-MMT showed significant healing of pressure ulcers as demonstrated by reduced area of redness and spontaneous hyperalgesia, lower amounts of in-site inflammatory cells (to the same level as the positive control Dersani®) and ultimately, complete epidermis re-epithelialization and tissue regeneration. Altogether, these findings suggest that a modified BCH-MMT film could serve as scaffolding for skin tissue engineering and potentially as a novel dressing material for pressure injury.

Xanthan-gelatin and xanthan-gelatin-keratin wound dressings for local delivery of Vitamin C

Recently, functional dressings that can protect the wound area from dehydration and bacterial infection and support healing have gained importance in place of passive dressings. This study aimed to develop temporary and regenerative xanthan/gelatin (XGH) and keratin/xanthan/gelatin hydrogels (KXGHs) that have high absorption capacity and applicability as a wound dressing that can provide local delivery of Vitamin C (VC). Firstly, xanthan/gelatin hydrogels were produced by crosslinking with different glycerol concentrations and characterized to determine the hydrogel composition. According to their weight ratios, xanthan, gelatin, and glycerol hydrogels are named. If their weight ratio is 1:1:2 (w/w/w), the group name is selected as X1:GEL1:GLY2. X1:GEL1:GLY2 hydrogel was selected for biocompatibility, mechanical property, water vapor transmission rate (WVTR), and porosity. The addition of keratin to X1:GEL1:GLY2 improved L929 fibroblasts viability and increased protein release. Water vapor transmission of XGHs and KXGHs was between 3059.09 ± 126 and 4523 ± 133 g m^-2 d^-1; therefore, they can be suitable for granulating, low to moderate exudate wounds. XGH and KXGHs loaded with VC had higher water uptake, making it more convenient for exudate wounds. VC was released for 100 h, and VC containing XGHs and KXGHs increased the collagen synthesis of L929 fibroblasts. All of the hydrogels (XGH, KXGH, and VC-KXGHs) inhibited the bacteria transmission. In conclusion, our results suggest that VC-XGH and VC-KXGH can be candidates for temporary wound dressing materials for skin wounds.

Moist Wound Healing with Commonly Available Dressings

Significance: A moist wound environment has several benefits that result in faster and better quality of healing. It facilitates autolytic debridement, reduces pain, reduces scarring, activates collagen synthesis, facilitates and promotes keratinocyte migration over the wound surface, and supports the presence and function of nutrients, growth factors, and other soluble mediators in the wound microenvironment. Recent Advances: Wound dressings can be utilized to create, maintain, and control a moist environment for healing. Moist wound dressings can be divided into films, foams, hydrocolloids, hydrogels, and alginates. We are also including negative pressure wound therapy systems in the moist dressings. Critical Issues: An optimal wound dressing should provide a moist environment and have an optimal water vapor transmission rate (WVTR) and absorptive capacity. It should also protect the wound against trauma and contamination and be easy to apply, painless to remove, and esthetically acceptable or even pleasing. Future Directions: Interventions, particularly dressing changes, by medical caregivers are labor intensive and expensive and there should be a continuous effort to reduce their number per week. Smart dressings with integrated microsensors and delivery capabilities that would allow wireless real-time monitoring and treatment of the wound would be very advantageous. This way the state of the wound as well as the wear time of the dressing could be assessed without dressing removal or visit to the wound care center. In addition, an ability to adjust the WVTRs to the exudate level of the wound (or having a large absorptive capacity without changing the WVTR) would be useful. This feature would guarantee an optimal level of hydration of the wound surface throughout the treatment.

Preparation, Characterization, and Biological Evaluation of Transparent Thin Carboxymethyl-Chitosan/Oxidized Carboxymethyl Cellulose Films as New Wound Dressings

Full thickness burns in which the damage penetrates deep into the skin layers and reaches underneath the muscle, compel the need for more effective cure. Herein, cross-linked carboxymethyl-chitosan (CM-chitosan) films, prepared by Schiff base association with oxidized carboxymethyl cellulose (OCMC), are investigated regarding the wound healing capacity on full thickness burn injuries in vivo. Transparent thin CM-chitosan/OCMC films are obtained with tensile strength reaching 6.11 MPa, elongation at break above 27%, and water absorption more than 800%, which operates in favor of absorbing excess exudate and monitoring the wound status. Furthermore, the nonadherent CM-chitosan/OCMC films, with satisfactory biodegradability, cell, and tissue compatibility, are readily used to the wound sites and easily removed following therapy on scalded tissue so as to alleviate the suffering from burn. The films efficiently promote epithelial and dermal regeneration compared to the control, achieving 75.9% and 94.4% wound closure, respectively, after 14 and 27 days. More importantly, CM-chitosan/OCMC films accelerate wound healing with natural mechanisms which include controlling inflammatory response, reducing apoptosis, promoting fibroblast cell proliferation, and collagen formation. In conclusion, the CM-chitosan/OCMC films elevate the repair ratio of burn injuries and have great potential for facilitating the healing process on full-thickness exuding wounds.

Preparation of Foam Dressings Based on Gelatin, Hyaluronic Acid, and Carboxymethyl Chitosan Containing Fibroblast Growth Factor-7 for Dermal Regeneration

Wound recovery close to the function of the native skin is the goal of wound healing. In this study, we prepared foam dressings (FDs; 2-GHC-FD-1–9, 5-GHC-FD-1–9, and 10-GHC-FD-1–9) composed of various concentrations of gelatin, hyaluronic acid, and carboxymethyl chitosan, which are chemically interconnected through amide bond formation, for evaluating wound healing. Tensile and cell proliferation tests showed that 2-GHC-FD-1–9 are suitable for wound dressing. For further evaluation, three types of FDs, 2-GHC-FD-1, 2-GHC-FD-4, and 2-GHC-FD-8 were chosen. The results of animal intradermal reactivity, water vapor transmission rate, and absorption rate of the three FDs indicated that 2-GHC-FD-8 is the most appropriate scaffold for wound healing. For wound healing acceleration, various concentrations of fibroblast growth factor-7 (FGF-7) was soaked in 2-GHC-FD-8 (2-GHC-FD-8/F1-6) and evaluated by using scanning electron microscopy, cell proliferation, release behavior, and in vivo animal tests. The FDs showed interconnected porous structures, increased cell proliferation until 8.0 × 10⁻¹¹ M, controlled release with initial burst within 1 h, and sustained release for 48 h. The results of the animal test showed an appropriate concentration of FGF-7 for wound healing. In addition, 2-GHC-FD-8 is a suitable scaffold for wound healing. Therefore, we suggest that 2-GHC-FD-8/F3 is a useful wound dressing for accelerating wound healing.

Fabrication of collagen with polyhexamethylene biguanide: A potential scaffold for infected wounds

Bacterial infection remains a great challenge in wound healing, especially in chronic wounds. Multidrug-resistant organisms are increasing in acute and chronic wound infections, which compromise the chance of therapeutics. Resistance to conventional antibiotics has created an urge to study new approach/system that can effectively control wound infection and enhance healing. Wound cover/dressing must exhibit biocompatibility and effectiveness in reducing bioburden at the wound site. Collagen, a natural biopolymer, possesses advantages over synthetic and other natural materials due to its unique biological properties. It can act as an excellent wound dressing and controlled drug delivery system. Currently, antiseptic agents such as silver, iodine, and polyhexamethylene biguanide (PHMB)-incorporated scaffolds have become widely accepted in chronic wound healing. In this study, PHMB-incorporated collagen scaffold has been prepared and characterized using Fourier transform infrared spectroscopy (FTIR), circular dichroism (CD), and differential scanning calorimetry (DSC), which showed retention of collagen nativity and integration of PHMB. The scanning electron microscopy (SEM) analysis revealed the porous structures of scaffolds. The cytotoxicity analysis showed PHMB is nontoxic at the concentration of 0.01% (wt/wt). The agar diffusion test and bacterial adhesion study demonstrated the effectiveness of PHMB-incorporated collagen scaffold against both gram positive and negative strains. This study concludes that PHMB-incorporated collagen scaffold could have the potential for infected wound healing.

The Protective Effect of Snail Secretion Filtrate in an Experimental Model of Excisional Wounds in Mice

Wound healing is a physiological process comprising several coordinated phases, such as inflammation, proliferation, and remodeling. For centuries, Helix aspersa Muller mucus has been known to have biological properties that are useful for treating skin disorders. In this study, we used a full-thickness excisional wound model in mice to test the hypothesis that Snail Secretion Filtrate (SSF) can improve the wound healing process. The mucus from Helix aspersa Muller was obtained mechanically by manually stimulating snails with a sterile cotton swab tip, and then the mucus was subjected to a series of filtrations to obtain SSF. After wounding, the mice were treated topically with SSF for 14 days. Our macroscopic results show that the SSF treatment significantly improved the speed and percentage of wound area closure. Furthermore, SSF improved several markers of proper wound healing, such as collagen deposition (Masson, COL3A1, matrix metalloproteinases (MMPs)) and the tissue remodeling process (α-sma, vascular-endothelial growth factor (VEGF)). SSF was also able to counteract the inflammatory process in injured wound tissue (myeloperoxidase (MPO) IL-1β, IL-6, TNF-α). In conclusion, our results show that SSF is able to enhance the speed and efficiency of wound healing and positively regulate several aspects of the wound healing process, such as the proliferative and remodeling phases.

Current Insights into Collagen Type I

Collagen type I (Col-I) is unique due to its high biocompatibility in human tissue. Despite its availability from various sources, Col-I naturally mimics the extracellular matrix (ECM) and generally makes up the larger protein component (90%) in vasculature, skin, tendon bone, and other tissue. The acceptable physicochemical properties of native Col-I further enhance the incorporation of Col-I in various fields, including pharmaceutical, cosmeceutical, regenerative medicine, and clinical. This review aims to discuss Col-I, covering the structure, various sources of availability, native collagen synthesis, current extraction methods, physicochemical characteristics, applications in various fields, and biomarkers. The review is intended to provide specific information on Col-I currently available, going back five years. This is expected to provide a helping hand for researchers who are concerned about any development on collagen-based products particularly for therapeutic fields.

Multifunctional 3D-Printed Wound Dressings

Personalized wound dressings provide enhanced healing for different wound types; however multicomponent wound dressings with discretely controllable delivery of different biologically active agents are yet to be developed. Here we report 3D-printed multicomponent biocomposite hydrogel wound dressings that have been selectively loaded with small molecules, metal nanoparticles, and proteins for independently controlled release at the wound site. Hydrogel wound dressings carrying antibacterial silver nanoparticles and vascular endothelial growth factor with predetermined release profiles were utilized to study the physiological response of the wound in a mouse model. Compared to controls, the application of dressings resulted in improvement in granulation tissue formation and differential levels of vascular density, dependent on the release profile of the growth factor. Our study demonstrates the versatility of the 3D-printed hydrogel dressings that can yield varied physiological responses in vivo and can further be adapted for personalized treatment of various wound types.

Natural-Based Biomaterial for Skin Wound Healing (Gelatin vs. Collagen): Expert Review

Collagen (Col) and gelatin are most extensively used in various fields, particularly in pharmaceuticals and therapeutics. Numerous researchers have proven that they are highly biocompatible to human tissues, exhibit low antigenicity and are easy to degrade. Despite their different sources both Col and gelatin have almost the same effects when it comes to wound healing mechanisms. Considering this, the bioactivity and biological effects of both Col and gelatin have been, and are being, constantly investigated through in vitro and in vivo assays to obtain maximum outcomes in the future. With regard to their proven nutritional values as sources of protein, Col and gelatin products exert various possible biological activities on cells in the extracellular matrix (ECM). In addition, a vast number of novel Col and gelatin applications have been discovered. This review compared Col and gelatin in terms of their structures, sources of derivatives, physicochemical properties, results of in vitro and in vivo studies, their roles in wound healing and the current challenges in wound healing. Thus, this review provides the current insights and the latest discoveries on both Col and gelatin in their wound healing mechanisms.

Improvement of the Wound-Healing Process by Curcumin-Loaded Chitosan/Collagen Blend Electrospun Nanofibers: In Vitro and In Vivo Studies

Chronic wounds have become a major health problem worldwide. Curcumin (Cur), with strong anti-inflammatory and anti-infective properties, is introduced as a unique molecule for wound dressing applications. In the present study, Cur-loaded chitosan/poly(ethylene oxide)/collagen (Cho/PEO/Col) nanofibers were developed for wound dressing applications by the blend-electrospinning process. Structural, mechanical, and biological properties of nanofibers were evaluated using SEM, FTIR, tensile testing, in vitro release study, Alamar blue cytotoxicity assay, and in vivo study in a rat model. According to the results, Cur was successfully released up to 3 days without any significant cytotoxicity of the above hybrid to human dermal fibroblasts. In vivo studies on full-thickness wounds in the rat model indicated significant improvement in the mean wound area closure by applying Cur-loaded Cho/PEO/Col nanofibers. The electrospun Cho/PEO/Col nanofibers loaded with Cur could be considered as a promising type of wound dressing in the wound-healing process.

Chelidoniummajus L. Incorporated Emulsion Electrospun PCL/PVA_PEC Nanofibrous Meshes for Antibacterial Wound Dressing Applications

Presently, there are many different types of wound dressings available on the market. Nonetheless, there is still a great interest to improve the performance and efficiency of these materials. Concerning that, new dressing materials containing natural products, such as medicinal plants that protect the wound from infections but also enhance skin regeneration have been or are being developed. Herein, we used for the first time a needleless emulsion electrospinning technique for incorporating Chelidoniummajus L. (C. majus), a medicinal plant widely known for its traditional therapeutic properties, in Polycaprolactone (PCL)/Polyvinyl Alcohol (PVA)_Pectin (PEC) nanofibrous meshes. Moreover, the potential use of these electrospun nanofibers as a carrier for C. majus was also explored. The results obtained revealed that the produced PCL/PVA_PEC nanofibrous meshes containing C. majus extract displayed morphological characteristics similar to the natural extracellular matrix of the skin (ECM). Furthermore, the produced meshes showed beneficial properties to support the healing process. Additionally, the C. majus-loaded PCL/PVA_PEC nanofibrous meshes inhibited Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) growth, reaching a 3.82 Log reduction, and showed to be useful for controlled release, without causing any cytotoxic effect on the normal human dermal fibroblasts (NHDF) cells. Hence, these findings suggest the promising suitability of this novel wound dressing material for prevention and treatment of bacterial wound infections.

Efficacy of 0.2% hyaluronic acid in the healing of skin abrasions in rats

Acute injuries, such as surgical and traumatic, heal normally in an organized and rapid manner. Studies point to the healing activity of hyaluronic acid in all phases of healing. The aim was to evaluate the effectiveness of hyaluronic acid in skin abrasions on the dorsum of rats to compare to usual products on the market. Seventy-two Wistar rats were subjected to excoriation of approximately 2.0 cm2 on the back by dermabrasion. According to the treatment, 3 groups were established: saline, chlorhexidine digluconate and 0.2% hyaluronic acid for 14 days. Animals were photographed on the 2nd, 7th, 10th and 14th postinjury days, and the index of healing of the abrasions was calculated. Biochemically, myeloperoxidase measurements of skin biopsies in addition to histological studies to assess the crust and epidermal layers were performed. The group treated with hyaluronic acid showed better re-epithelialization from the other groups (p < 0.05) on the 7th and 10th days. For the thickness of the crust, the hyaluronic acid group presented thinner crust than other groups on the 10th and 14th days (p < 0.05), but in the epidermis, no difference was observed between the groups studied. All groups showed an increase in myeloperoxidase enzyme on the 2nd day, but a decreasing on the 7th day. On the 10th day, there was a difference in the hyaluronic acid group compared to the other groups (p < 0.05). The application of 0.2% hyaluronic acid significantly accelerated the re-epithelialization of skin abrasions compared to saline and chlorhexidine digluconate.

Antibacterial and Biocompatible Hydrogel Dressing Based on Gelatin- and Castor-Oil-Derived Biocidal Agent

Favored antibacterial activity associated with excellent biocompatibility, mechanical durability, and exudate handling needs to be addressed by modern dressing to achieve the desired wound healing. This paper deals with developing a new green and facile approach to manufacturing nonleachable antibacterial gelatin-based films for wound dressing. Therefore, a reactive methoxy-silane-functionalized quaternary ammonium compound bearing a fatty amide residue originating from castor oil (Si-CAQ) was initially synthesized. The antibacterial dressings were then fabricated via sol-gel and condensation reactions of the mixture containing gelatin, Si-CAQ, (3-glycidyloxypropyl) trimethoxysilane, and poly(vinyl alcohol). By utilizing bioactive polymers as starting materials and eliminating organic solvents during the dressing preparation, desirable clinical safety could be ensured. The gelatin-based films presented appropriate mechanical properties, such as flexibility and strength, in both dried and hydrated states (tensile strength >6 MPa and elongation >100). It is due to the in situ generations of the inorganic silicon domain in the organic framework via the sol-gel cross-linking process. The prepared dressings exhibited desirable features, including excellent biocompatibility (cell viability >95%), proper wound-exudate-managing characteristics (equilibrium water contact (EWA) 280-350% and water vapor transmission rate (WVTR) 2040-2200 g/m²/day), fluid handling capacity (FHC) (3-3.35 g), as well as commendable hemocompatibility. The promising bactericidal activity of the dressing against Bacillus subtilis, methicillin-resistant Staphylococcus aureus, and Escherichia coli strains with a contact-killing efficacy of 100% could prevent infection development at the wounded area. As evaluated by the wound scratch assay, the desired fibroblast cell growth, migration, and proliferation indicated the capability of the dressing to facilitate the healing process by encouraging fibroblast cell migration to the damaged area. In vivo wound-healing results showed that the prepared biocidal dressing stimulates wound healing and enhances epithelialization, collagen maturation, and vascularization of wounds due to their antibacterial effects and accelerated cellular functions.

Formulation and characterisation of alginate hydrocolloid film dressing loaded with gallic acid for potential chronic wound healing

Background: A dramatic growth in the prevalence of chronic wounds due to diabetes has represented serious global health care and economic issues. Hence, there is an imperative need to develop an effective and affordable wound dressing for chronic wounds. Recent research has featured the potential of bioactive compound gallic acid (GA) in the context of wound recovery due to their safety and comparatively low cost. However, there is a scarcity of research that focuses on formulating GA into a stable and functional hydrocolloid film dressing. Thus, this present study aimed to formulate and characterise GA-loaded alginate-based hydrocolloid film dressing which is potentially used as low to medium suppurating chronic wound treatment. Methods: The hydrocolloid composite films were pre-formulated by blending sodium alginate (SA) with different combinations of polymers. The hydrocolloid films were developed using solvent-casting method and the most satisfactory film formulation was further incorporated with various GA concentrations (0.1%, 0.5% and 1%). The drug-loaded films were then characterised for their physicochemical properties to assess their potential use as drug delivery systems for chronic wound treatment. Results: In the pre-formulation studies, sodium alginate-pectin (SA-PC) based hydrocolloid film was found to be the most satisfactory, for being homogenous and retaining smoothness on surface along with satisfactory film flexibility. The SA-PC film was chosen for further loading with GA in 0.1%, 0.5% and 1%. The characterisation studies revealed that all GA-loaded films possess superior wound dressing properties of acidic pH range (3.97-4.04), moderate viscosity (1600 mPa-s-3198 mPa-s), optimal  moisture vapor transmission rate (1195 g/m 2/day, 1237g/m 2/day and 1112 g/m 2/day), slower moisture absorption and film expansion rate and no chemical interaction between the GA and polymers under FTIR analysis. Conclusion: An SA-PC hydrocolloid film incorporated with gallic acid as a potentially applicable wound dressing for low to medium suppurating chronic wounds was successfully developed.

Fabrication and Characterization of Glycerol/Chitosan/Polyvinyl Alcohol-Based Transparent Hydrogel Films Loaded with Silver Nanoparticles for Antibacterial Wound Dressing Applications

Background

Wounds have a bad prognostic nature and excessive discharges whose regular wound dressings are ineffective. Hydrogels are the best candidates for dressing such wounds due to their high water content and ability to exchange substances. Accordingly, the purpose of this study was to make a novel hydrogel wound dressing following the integration of various findings on wound healing and the use of regenerative medicine.

Materials and Methods

Various compounds were fabricated by glycerol/chitosan/polyvinyl alcohol (PVA) and then characterized to obtain the optimal composition using several techniques, including a water vapor passage test, scanning electron microscopy, water absorption, tensile strength, biodegradability, Fourier transform infrared spectroscopy, and antibacterial test.

Results

The findings revealed the optimal dressing ratio. Better antibacterial activity was found for the silver nanoparticle (AgNP) dressing.

Conclusion

Our new fabricated dressing, glycerol/chitosan/PVA hydrogel loaded with AgNPs, exhibited satisfactory wound healing properties.

Co-electrospun nanofibrous mats loaded with bitter gourd (Momordica charantia) extract as the wound dressing materials: in vitro and in vivo study

BACKGROUND

Interactive dressings are innovatively designed to interact with the wound surface and alter the wound environment to promote wound healing. In the current study, we integrated the physicochemical properties of Poly (caprolactone)/ Poly (vinyl alcohol)/Collagen (PCL/PVA/Col) nanofibers with the biological activities of Momordica charantia pulp extract to develop an efficient wound dressing. The electrospinning method was applied to fabricate the nanofibers, and the prepared wound dressings were thoroughly characterized.

RESULTS

SEM imaging showed that the nanofibers were uniform, straight, without any beds with a diameter in the range of 260 to 480 nm. Increasing the concentration of the extract increased the diameter of the nanofibers and also the wettability characteristics while reduced the ultimate tensile strength from 4.37 ± 0.90 MPa for PCL/PVA/Col to 1.62 ± 0.50 MPa for PCL/PVA/Col/Ex 10% (p < 0.05). The in vivo studies showed that the application of the wound dressings significantly enhanced the healing process and the highest wound closure, 94.01 ± 8.12%, was obtained by PCL/PVA/Col/Ex 10% nanofibers (p < 0.05).

CONCLUSION

The incorporation of the extract had no significant effects on nanofibers' porosity, water vapor permeability, and swelling characteristics. The in vitro evaluations showed that the fabricated nanofibers were hemocompatible, cytocompatible, and prevent bacterial penetration through the dressing. These findings implied that the PCL/PVA/Col/Ex nanofibers can be applied as the wound dressing materials.

Synthesis and evaluation of an alginate-methacrylate xerogel for insulin delivery towards wound healing applications

Background: Alginate is one of the most widely used biopolymer for wound healing. But poor mechanical strength and degradability limits its application especially as a drug-delivery matrix. The aim of this study was to develop stable alginate based scaffold for insulin delivery toward wound care. Materials & methods: The xerogel alginate-g-poly (methacrylic acid; AGM2S) was characterized by various analytical techniques. Results: AGM2S xerogel showed improved physical stability, low degradation, good swelling and water vapour transmission rate (WVTR). About 70% of insulin was released from loaded xerogel over a period of 48 h and favorably modulated the healing response in in vitro scratch wound assay. Conclusion: Grafting improved the strength and stability of alginate xerogel and the results suggest the application of insulin loaded AGM2S xerogels as a potential wound healing material.

Effects of chitosan-collagen dressing on wound healing in vitro and in vivo assays

The present study was designed to fabricate a new chitosan-collagen sponge (CCS) for potential wound dressing applications. CCS was fabricated by a 3.0% chitosan mixture with a 1.0% type I collagen (7:3(w/w)) through freeze-drying. Then the dressing was prepared to evaluate its properties through a series of tests. The new-made dressing demonstrated its safety toward NIH3T3 cells. Furthermore, the CCS showed the significant surround inhibition zone than empty controls inoculated by E. coli and S. aureus. Moreover, the moisture rates of CCS were increased more rapidly than the collagen and blank sponge groups. The results revealed that the CCS had the characteristics of nontoxicity, biocompatibility, good antibacterial activity, and water retention. We used a full-thickness excisional wound healing model to evaluate the in vivo efficacy of the new dressing. The results showed remarkable healing at 14th day post-operation compared with injuries treated with collagen only as a negative control in addition to chitosan only. Our results suggest that the chitosan-collagen wound dressing were identified as a new promising candidate for further wound application.

Gelatin/poly(vinyl alcohol) based hydrogel film - A potential biomaterial for wound dressing: Experimental design and optimization followed by rotatable central composite design

The development of hydrogel films for biomedical applications is interesting due to their characteristics. Hydrogel films based on gelatin and poly(vinyl alcohol) (PVA) are developed and characterized using a rotatable central composite design. The optimized hydrogel film is obtained by the function desirability of the Statistica® software and is also characterized by swelling kinetics, oxygen permeability, adhesiveness, TGA, DSC, and XRD. The results of the experimental design show that gelatin and PVA concentrations have a significant influence on the response variables, and the exposure doses to UV light show no significant effect. The optimized hydrogel film is elastic, presents good mechanical resistance and swelling capacity in water and exudate solution, is permeable to oxygen, and is capable of adjusting itself and maintains contact close to the skin. In this way, considering all the properties evaluated, the optimized film has characteristics suitable for biomedical applications as wound dressings.

Zwitterionized Nanofibrous Poly(vinylidene fluoride) Membranes for Improving the Healing of Diabetic Wounds

This work presents nanofibrous membranes made of poly(vinylidene fluoride) (PVDF) and poly(2-methacryloyloxyethyl phosphorylcholine-co-methacryloyloxyethyl butylurethane) (PMBU) for promoting the healing of acute and chronic wounds. Membranes were prepared by an electrospinning process, which led to matrixes with a pore size mimicking the extracellular matrix. PMBU greatly improves the hydration of membranes, resulting in very low biofouling by protein or bacteria and enhanced blood compatibility while the cell viability remains close to 100%. This set of properties exhibited by the suitable combination of physical structure and material composition led to applying the zwitterionic nanofibrous membranes as wound-dressing materials for acute and chronic wounds. The results demonstrated that the zwitterionic membrane could compete with commercial dressings in terms of wound-healing kinetics and could outperform them with regard to the quality of new tissue. Histological analyses suggested that inflammation was reduced while proliferative and maturation phases were accelerated, leading to homogeneous re-epithelialization. This study unveils another potential biomedical application of antifouling zwitterionic membranes.