Detection of mercury ions based on mercury-induced switching of enzyme-like activity of platinum/gold nanoparticles

A facile "turn-on" fluorescent method with high sensitivity for Hg(2+) detection using magnetic Fe3O4 nanoparticles and hybridization chain reactions

In this manuscript, the authors molecularly engineered a hybridization chain reactions (HCRs) based probe on magnetic Fe3O4 nanoparticles for the sensitive detection of Hg(2+). The sensing system comprised three probes: capture probe H1, report probe H2, and report probe H3. The capture probe was modified on the surface of magnetic Fe3O4 nanoparticles. The report probes were labeled with fluorescein isothiocyanate (FITC). Without Hg(2+), the report probes were stable as molecular beacons in solution. In the presence of Hg(2+), the T-rich capture probes and report probes will hybridize into double-helical DNA domains with the aid of T-Hg(2+)-T coordination chemistry. Trigged by this reaction, more molecular beacons open and form a super tandem structure. Herein, the fluorescence signal was magnified by capturing more report probes. Separating the target and captured report probes from reaction solution was benefit to decrease the background signal and interference from other metal ions. The detection limit of this method was about 0.36nM, which is much lower than the regulations of World Health Organization and U.S. Environmental Protection Agency on Hg(2+) in drink water. This proposed sensing strategy also showed favorable selectivity over other common metal ions. In addition, it has good practicability in real water samples.

Nanomaterial-enabled Rapid Detection of Water Contaminants

Water contaminants, e.g., inorganic chemicals and microorganisms, are critical metrics for water quality monitoring and have significant impacts on human health and plants/organisms living in water. The scope and focus of this review is nanomaterial-based optical, electronic, and electrochemical sensors for rapid detection of water contaminants, e.g., heavy metals, anions, and bacteria. These contaminants are commonly found in different water systems. The importance of water quality monitoring and control demands significant advancement in the detection of contaminants in water because current sensing technologies for water contaminants have limitations. The advantages of nanomaterial-based sensing technologies are highlighted and recent progress on nanomaterial-based sensors for rapid water contaminant detection is discussed. An outlook for future research into this rapidly growing field is also provided.

Humic acid-assisted synthesis of stable copper nanoparticles as a peroxidase mimetic and their application in glucose detection

In this report, stable copper nanoparticles (Cu NPs) were prepared through a facile annealing process using humic acid as the reducing and stabilizing agents. The products were characterized by X-ray powder diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The prepared Cu NPs show remarkably intrinsic peroxidase-like activity, which can rapidly catalyze the oxidation of the peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), in the presence of H₂O₂ to produce a blue-color reaction. The detection limit of H₂O₂ by Cu NPs can be as low as 1.32 × 10^-7 M. More importantly, the prepared Cu NPs show excellent stability, which can hardly be oxidized even after 6 months. Based on the aforementioned mechanism, a simple, rapid and selective colorimetric method for glucose detection was developed, and the detection limit of glucose was 6.86 × 10^-7 M. This study provides a novel method for the preparation of stable Cu NPs, which may have widespread applications in the detection of glucose in the human body and pear juice.

Immobilization of aptamer-modified gold nanoparticles on BiOCl nanosheets: Tunable peroxidase-like activity by protein recognition

A self-assembled nanocomposite is prepared from an aqueous mixture of aptamer-modified gold nanoparticles (Apt-Au NPs), bismuth ions and chloride ions. The Apt-Au NPs are immobilized on bismuth oxychloride (BiOCl) nanosheets in situ to form Apt-Au NPs/BiOCl nanocomposites. The as-prepared nanocomposites exhibit high peroxidase-like activity for the catalytic conversion of Amplex Red (AR) to fluorescent resorufin in the presence of H2O2. The catalytic activity of Apt-Au NPs/BiOCl nanocomposites is at least 90-fold higher than that of Apt-Au NPs or BiOCl nanosheets, revealing synergistic effects on their activity. The catalytic activity of Apt-Au NPs/BiOCl nanocomposites is suppressed by vascular endothelial growth factor-A165 (VEGF-A165) molecules that specifically interact with the aptamer units (Del-5-1 and v7t-1) on the nanocomposite surface. The AR/H2O2-Apt-Au NPs/BiOCl nanocomposites probe shows high selectivity (>1000-fold over other proteins) and sensitivity (detection limit ~0.5nM) for the detection of VEGF-A165. Furthermore, the probe is employed for the detection of VEGF isoforms and for the study of interactions between VEGF and VEGF receptors. The practicality of this simple, rapid, cost-effective probe is validated by the analysis of VEGF-A165 in cell culture media, showing its great potential for the analysis of VEGF in biological samples.

Highly sensitive and specific colorimetric detection of cancer cells via dual-aptamer target binding strategy

Simple, rapid, sensitive and specific detection of cancer cells is of great importance for early and accurate cancer diagnostics and therapy. By coupling nanotechnology and dual-aptamer target binding strategies, we developed a colorimetric assay for visually detecting cancer cells with high sensitivity and specificity. The nanotechnology including high catalytic activity of PtAuNP and magnetic separation & concentration plays a vital role on the signal amplification and improvement of detection sensitivity. The color change caused by small amount of target cancer cells (10 cells/mL) can be clearly distinguished by naked eyes. The dual-aptamer target binding strategy guarantees the detection specificity that large amount of non-cancer cells and different cancer cells (10(4) cells/mL) cannot cause obvious color change. A detection limit as low as 10 cells/mL with detection linear range from 10 to 10(5) cells/mL was reached according to the experimental detections in phosphate buffer solution as well as serum sample. The developed enzyme-free and cost effective colorimetric assay is simple and no need of instrument while still provides excellent sensitivity, specificity and repeatability, having potential application on point-of-care cancer diagnosis.

A strongly coupled Au/Fe3O4/GO hybrid material with enhanced nanozyme activity for highly sensitive colorimetric detection, and rapid and efficient removal of Hg(2+) in aqueous solutions

We have developed an efficient strategy for synthesizing a strongly coupled Au/Fe3O4/GO hybrid material to improve the catalytic activity, stability, and separation capability of Au nanoparticles (NPs) and Hg(2+). The hybrid material can be synthesized by the direct anchoring of Au and Fe3O4 NPs on the functional groups of GO. This approach affords strong chemical attachments between the NPs and GO, allowing this hybrid material to ultrasensitively detect Hg(2+) in aqueous solutions with a detection limit as low as 0.15 nM. In addition, the deposition of Hg(0) on the surface of Au/Fe3O4/GO could be quickly (within 30 min) and efficiently (>99% elimination efficiency) removed by the simple application of an external magnetic field and then Au/Fe3O4/GO could be subsequently reused at least 15 times, with the elimination efficiency remaining high (>96%).

Colorimetric detection of mercury ion based on unmodified gold nanoparticles and target-triggered hybridization chain reaction amplification

A novel unmodified gold nanoparticles (AuNPs)-based colorimetric strategy for label-free, specific and sensitive mercury ion (Hg(2+)) detection was demonstrated by using thymine-Hg(2)(+)-thymine (T-Hg(2)(+)-T) recognition mechanism and hybridization chain reaction (HCR) amplification strategy. In this protocol, a structure-switching probe (H0) was designed to recognize Hg(2+) and then propagated a chain reaction of hybridization events between two other hairpin probes (H1 and H2). In the absence of Hg(2+), all hairpin probes could stably coexist in solution, the exposed sticky ends of hairpin probes were capable of stabilizing AuNPs. As a result, salt-induced AuNPs aggregation could be effectively prevented. In the presence of Hg(2+), thymine bases of H0 could specifically interact with Hg(2+) to form stable T-Hg(2)(+)-T complex. Consequently, the hairpin structure of H0 probe was changed. As H1/H2 probes were added, the HCR process could be triggered and nicked double-helixes were formed. Since it was difficult for the formed nicked double-helixes to inhibit salt-induced AuNPs aggregation, a red-to-blue color change was observed in the colloid solution as the salt concentration increased. With the elegant amplification effect of HCR, a detection limit of around 30 nM was achieved (S/N=3), which was about 1-2 orders of magnitudes lower than that of previous unmodified AuNPs-based colorimetric methods. By using the T-Hg(2)(+)-T recognition mechanism, high selectivity was also obtained. As an unmodified AuNPs-based colorimetric strategy, the system was simple in design, convenient in operation, and eliminated the requirements of separation processes, chemical modifications, and sophisticated instrumentations.

Highly efficient colorimetric detection of ATP utilizing a split aptamer target binding strategy and superior catalytic activity of graphene oxide–platinum/gold nanoparticles

The specific binding of ATP and its aptamer linked the split aptamer-modified GO/PDDA/PtAuNPs and magnetic beads together. Using magnetic separation, TMB was catalyzed into a colored product by nanocomposites, which enabled rapid detection of ATP.

Superior peroxidase mimetic activity of carbon dots–Pt nanocomposites relies on synergistic effects

CDs–Pt nanocomposites were prepared and proposed as robust enzyme mimetics for the first time.

Folic acid functionalized silver nanoparticles with sensitivity and selectivity colorimetric and fluorescent detection for Hg2+ and efficient catalysis

In this research, folic acid functionalized silver nanoparticles (FA-AgNPs) were selected as a colorimetric and a 'turn on' fluorescent sensor for detecting Hg(2+). After being added into Hg(2+), AgNPs can emit stable fluorescence at 440 nm when the excitation wavelength is selected at 275 nm. The absorbance and fluorescence of the FA-AgNPs could reflect the concentration of the Hg(2+) ions. Thus, we developed a simple, sensitive analytical method to detect Hg(2+) based on the colorimetric and fluorescence enhancement of FA-AgNPs. The sensor exhibits two linear response ranges between absorbance and fluorescence intensity with Hg(2+) concentration, respectively. Meanwhile, a detection limit of 1 nM is estimated based on the linear relationship between responses with a concentration of Hg(2+). The high specificity of Hg(2+) with FA-AgNPs interactions provided the excellent selectivity towards detecting Hg(2+) over other metal ions (Pb(2+), Mg(2+), Zn(2+), Ni(2+), Cu(2+), Co(2+), Ca(2+), Mn(2+), Fe(2+), Cd(2+), Ba(2+), Cr(6+) and Cr(3+)). This will provide a simple, effective and multifunctional colorimetric and fluorescent sensor for on-site and real-time Hg(2+) ion detection. The proposed method can be applied to the analysis of trace Hg(2+) in lake water. Additionally, the FA-AgNPs can be used as efficient catalyst for the reduction of 4-nitrophenol and potassium hexacyanoferrate (III).

Logic control of enzyme-like gold nanoparticles for selective detection of lead and mercury ions

Functional logic gates based on lead ions (Pb(2+)) and mercury ions (Hg(2+)) that induce peroxidase-like activities in gold nanoparticles (Au NPs) in the presence of platinum (Pt(4+)) and bismuth ions (Bi(3+)) are presented. The "AND" logic gate is constructed using Pt(4+)/Pb(2+) as the input and the peroxidase-like activity of the Au NPs as the output; this logic gate is denoted as "Pt(4+)/Pb(2+)(AND)-Au NPPOX". When Pt(4+) and Pb(2+) coexist, strong metallophilic interactions (between Pt and Pb atoms/ions) and aurophilic interactions (between Au and Pb/Pt atoms/ions) result in significant increases in the deposition of Pt and Pb atoms/ions onto the Au NPs, leading to enhanced peroxidase-like activity. The "INHIBIT" logic gate is fabricated by using Bi(3+) and Hg(2+) as the input and the peroxidase-like activity of the Au NPs as the output; this logic gate is denoted as "Bi(3+)/Hg(2+)(INHIBIT)-Au NPPOX". High peroxidase-like activity of Au NPs in the presence of Bi(3+) is a result of the various valence (oxidation) states of Bi(3+) and Au (Au(+)/Au(0)) atoms on the nanoparticle's surface. When Bi(3+) and Hg(2+) coexist, strong Hg-Au amalgamation results in a large decrease in the peroxidase-like activity of the Au NPs. These two probes (Pt(4+)/Pb(2+)(AND)-Au NPPOX and Bi(3+)/Hg(2+)(INHIBIT)-Au NPPOX) allow selective detection of Pb(2+) and Hg(2+) down to nanomolar quantities. The practicality of these two probes has been validated by analysis of Pb(2+) and Hg(2+) in environmental water samples (tap water, river water, and lake water). In addition, an integrated logic circuit based on the color change (formation of reddish resorufin product) and generation of O2 bubbles from these two probes has been constructed, allowing visual detection of Pb(2+) and Hg(2+) in aqueous solution.

Logical regulation of the enzyme-like activity of gold nanoparticles by using heavy metal ions

In this study we employed self-deposition and competitive or synergistic interactions between metal ions and gold nanoparticles (Au NPs) to develop OR, AND, INHIBIT, and XOR logic gates through regulation of the enzyme-like activity of Au NPs. In the presence of various metal ions (Ag(+), Bi(3+), Pb(2+), Pt(4+), and Hg(2+)), we found that Au NPs (13 nm) exhibited peroxidase-, oxidase-, or catalase-like activity. After Ag(+), Bi(3+), or Pb(2+) ions had been deposited on the Au NPs, the particles displayed strong peroxidase-like activity; on the other hand, they exhibited strong oxidase- and catalase-like activities after reactions with Ag(+)/Hg(2+) and Hg(2+)/Bi(3+) ions, respectively. The catalytic activities of these Au NPs arose mainly from the various oxidation states of the surface metal atoms/ions. Taking advantage of this behavior, we constructed multiplex logic operations-OR, AND, INHIBIT, and XOR logic gates-through regulation of the enzyme-like activity after the introduction of metal ions into the Au NP solution. When we deposited Hg(2+) and/or Bi(3+) ions onto the Au NPs, the catalase-like activities of the Au NPs were strongly enhanced (>100-fold). Therefore, we could construct an OR logic gate by using Hg(2+)/Bi(3+) as inputs and the catalase-like activity of the Au NPs as the output. Likewise, we constructed an AND logic gate by using Pt(4+) and Hg(2+) as inputs and the oxidase-like activity of the Au NPs as the output; the co-deposition of Pt and Hg atoms/ions on the Au NPs was responsible for this oxidase-like activity. Competition between Pb(2+) and Hg(2+) ions for the Au NPs allowed us to develop an INHIBIT logic gate-using Pb(2+) and Hg(2+) as inputs and the peroxidase-like activity of the Au NPs as the output. Finally, regulation of the peroxidase-like activity of the Au NPs through the two inputs Ag(+) and Bi(3+) enabled us to construct an XOR logic gate.