Sandwich-like NiCo-LDH/rGO with Rich Mesopores and High Charge Transfer Capability for Flexible Supercapacitors

Layered double metal hydroxides (LDHs) have been widely used in the energy storage field due to adjustable composition and interlayer spacing. However, easy to agglomerate, poor electrical conductivity, and large...

Ultrafine MoS2 Nanosheets Vertically Patterned on Graphene for High-Efficient Li-Ion and Na-Ion Storage

Hierarchically two-dimensional (2D) heteroarchitecture with ultrafine MoS₂ nanosheets vertically patterned on graphene is developed by using a facile solvothermal method. It is revealed that the strong interfacial interaction between acidic Mo precursors and graphene oxides allows for uniform and tight alignment of edge-oriented MoS₂ nanosheets on planar graphene. The unique sheet-on-sheet architecture is of grand advantage in synergistically utilizing the highly conductive graphene and the electroactive MoS₂, thus rendering boosted reaction kinetics and robust structural integrity for energy storage. Consequently, the heterostructured MoS₂@graphene exhibits impressive Li/Na-ion storage properties, including high-capacity delivery and superior rate/cycling capability. The present study will provide a positive impetus on rational design of 2D metal sulfide/graphene composites as advanced electrode materials for high-efficient alkali–metal ion storage.

Graphene's Role in Emerging Trends of Capacitive Energy Storage

Technological breakthroughs in energy storage are being driven by the development of next-generation supercapacitors with favorable features besides high-power density and cycling stability. In this innovation, graphene and its derived materials play an active role. Here, the research status of graphene supercapacitors is analyzed. Recent progress is outlined in graphene assembly, exfoliation, and processing techniques. In addition, electrochemical and electrical attributes that are increasingly valued in next-generation supercapacitors are highlighted along with a summary of the latest research addressing chemical modification of graphene and its derivatives for future supercapacitors. The challenges and solutions discussed in the review hopefully will shed light on the commercialization of graphene and a broader genre of 2D materials in energy storage applications.

Stretchable Energy Storage Devices Based on Carbon Materials

Stretchable energy storage devices are essential for developing stretchable electronics and have thus attracted extensive attention in a variety of fields including wearable devices and bioelectronics. Carbon materials, e.g., carbon nanotube and graphene, are widely investigated as electrode materials for energy storage devices due to their large specific surface areas and combined remarkable electrical and electrochemical properties. They can also be effectively composited with many other functional materials or designed into different microstructures for fabricating stretchable energy storage devices. This review summarizes recent advances toward the development of carbon-material-based stretchable energy storage devices. An overview of common carbon materials' fundamental properties and general strategies to enable the stretchability of carbon-material-based electrodes are presented. The performances of the as-fabricated stretchable energy storage devices including supercapacitors, lithium-ion batteries, metal-air batteries, and other batteries are then carefully discussed. Challenges and perspectives in this emerging field are finally highlighted for future studies.

Recent Progress in Flexible Graphene-Based Composite Fiber Electrodes for Supercapacitors

Graphene has shown the world its fascinating properties, including high specific surface area, high conductivity, and extraordinary mechanical properties, which enable graphene to be a competent candidate for electrode materials. However, some challenges remain in the real applications of graphene-based electrodes, such as continuous preparation of graphene fibers with highly ordered graphene sheets as well as strong interlayer interactions. The combination of graphene with other materials or functional guests hence appears as a more promising pathway via post-treatment and in situ hybridism to produce composite fibers. This article firstly provides a full account of the classification of graphene-based composite fiber electrodes, including carbon allotropy, conductive polymer, metal oxide and other two-dimensional (2D) materials. The preparation methods of graphene-based composite fibers are then discussed in detail. The context further demonstrates the performance optimization of graphene-based composite fiber electrodes, involving microstructure design and surface modification, followed by the elaboration of the application of graphene-based composite fiber electrodes in supercapacitors. Finally, we present the remaining challenges that exist to date in order to provide meaningful guidelines in the development process and prospects of graphene-based composite fiber electrodes.

A 2H-MoS2/carbon cloth composite for high-performance all-solid-state supercapacitors derived from a molybdenum dithiocarbamate complex

A molecular complex Mo₂O₂(μ-S)₂(Et₂dtc)₂ (dtc = dithiocarbamate) is prepared and loaded onto carbon cloth (CC) through facile solvothermal treatment, followed by subsequent single-source pyrolysis. This results in a highly porous 2H-MoS₂/CC composite with a sponge-like stacked lamellar morphology. Due to its high porosity and unique nano/microstructure, the MoS₂/CC composite exhibits a specific capacitance of 550.0 F g^-1 at 1 A g^-1, outperforming some 1T-MoS₂ based electrodes. The composite is further assembled into a symmetric all-solid-state supercapacitor, which can be operated stably at a wide potential window and shows a specific capacitance of 127.5 F g^-1 at 1 A g^-1. In addition, the device delivers a high energy density of 70.8 W h kg^-1 at 1 kW kg^-1, which still remains 15.0 W h kg^-1 at 18.0 kW kg^-1. 75% of the performance of the device can be retained after 8000 cycles. Such remarkable electrochemical performance is attributed to its novel nano/microstructures with a large surface area, convenient ion transport pathways, enhanced conductivity, and improved structural stability. Thus, this work demonstrates a highly promising dithiocarbamate-based single-precursor pyrolysis route towards the fabrication of metal sulfides/carbon composites for energy storage applications.

Ultralight, High Capacitance, Mechanically Strong Graphene-Cellulose Aerogels

With increasing energy demand driving the need for eco-friendly and efficient energy storage technology, supercapacitors are becoming increasingly prevalent in wearable devices because of their portability and stability. The performance of these supercapacitors is highly dependent on the choice of electrode material. The high capacitance and mechanical properties needed for these materials can be achieved by combining graphene's stable electrical properties with renewable cellulose's excellent mechanical properties into porous aerogels. In this study, graphene-cellulose hydrogels were prepared by a one-step hydrothermal method, with porous, ultra-light, and mechanically strong graphene-cellulose aerogels then prepared by freeze-drying. These composite aerogels possess excellent mechanical strength and high specific capacitance, capable of bearing about 1095 times the pressure of their own weight. Electrochemical tests show the specific capacitance of these composite aerogels can reach 202 F/g at a scanning rate of 5 mA/cm2. In view of their high surface area and fast charge transport provided by their 3D porous structure, graphene-cellulose aerogels have great potential as sustainable supercapacitor electrodes.

CNT-rGO Hydrogel-Integrated Fabric Composite Synthesized via an Interfacial Gelation Process for Wearable Supercapacitor Electrodes

We demonstrate a flexible and stretchable supercapacitor assembled via straightforward interfacial gelation of reduced graphene oxide (rGO) with carbon nanotube (CNT) on a stretchable fabric surface. The difference between the redox potential of aqueous graphene oxide (GO) dispersion, prepared using a modified Hummers' method, and of a solid Zn plate, which was used as an external stimulus, induces a spontaneous reduction of GO flakes forming porous CNT-rGO hydrogel at the liquid-solid interface. With the aid of Zn, a macroporous and flexible CNT-rGO hydrogel was fabricated on a stretchable fabric platform using a facile fabrication method, and the CNT-rGO fabric composite was assembled into a supercapacitor to demonstrate its feasibility as a wearable electrode. The porous structure of the as-formed CNT-rGO fabric composite allows excellent electrolyte accessibility and ion transport that result in a fast charge/discharge rate up to 100 mV/s and a large areal capacity of 10.13 mF/cm² at a discharge rate of 0.5 mA (0.1 mA/cm²). The inclusion of one-dimensional CNT as conductive bridges allows an excellent capacity retention of 95.2% after complete folding of the electrode and a capacity retention of 93.3% after 1000 bending cycles. Additional stretching test displayed a high capacity retention of 90.0% even at an applied strain as high as 50%, overcoming previous limitations of brittle graphene-based electrodes. This low-cost, lightweight, easy to synthesize, stretchable supercapacitor holds promise for next-generation wearable electronics and energy storage applications.

Recent Progress on Two-Dimensional Carbon Materials for Emerging Post-Lithium (Na+, K+, Zn2+) Hybrid Supercapacitors

The hybrid ion capacitor (HIC) is a hybrid electrochemical energy storage device that combines the intercalation mechanism of a lithium-ion battery anode with the double-layer mechanism of the cathode. Thus, an HIC combines the high energy density of batteries and the high power density of supercapacitors, thus bridging the gap between batteries and supercapacitors. Two-dimensional (2D) carbon materials (graphite, graphene, carbon nanosheets) are promising candidates for hybrid capacitors owing to their unique physical and chemical properties, including their enormous specific surface areas, abundance of active sites (surface and functional groups), and large interlayer spacing. So far, there has been no review focusing on the 2D carbon-based materials for the emerging post-lithium hybrid capacitors. This concept review considers the role of 2D carbon in hybrid capacitors and the recent progress in the application of 2D carbon materials for post-Li (Na+, K+, Zn2+) hybrid capacitors. Moreover, their challenges and trends in their future development are discussed.

Self-Sustained Autonomous Wireless Sensor Network with Integrated Solar Photovoltaic System for Internet of Smart Home-Building (IoSHB) Applications

Conventional wireless sensor networks (WSNs) in smart home-building (SHB) are typically driven by batteries, limiting their lifespan and the maximum number of deployable units. To satisfy the energy demand for the next generation of SHB which can interconnect WSNs to make the internet of smart home-building (IoSHB), this study introduces the design and implementation of a 250 mW to 2.3 W energy harvesting device. The proposed device is dynamically autonomous owing to the integration of embedded solar photovoltaic (PV) modules and power storage through a supercapacitor (SC; 5 V, 0.47 F) capable of powering WSNs for 95 s (up to 4.11 V). The deployed device can harvest indoor and outdoor ambient light at a minimum illumination of 50 lux and a maximum illumination of 200 lux. Moreover, the proposed system supports wireless fidelity (Wi-Fi) and Bluetooth Low Energy (BLE) to do data transfer to a webserver as a complete internet of things (IoT) device. A customized android dashboard is further developed for data monitoring on a smartphone. All in all, this self-powered WSN node can interface with the users of the SHBs for displaying ambient data, which demonstrates its promising applicability and stability.

Carbon Dioxide Tornado-Type Atmospheric-Pressure-Plasma-Jet-Processed rGO-SnO2 Nanocomposites for Symmetric Supercapacitors

Pastes containing reduced graphene oxide (rGO) and SnCl2 solution were screen printed on carbon cloth and then calcined using a CO2 tornado-type atmospheric-pressure plasma jet (APPJ). The tornado circulation of the plasma gas enhances the mixing of the reactive plasma species and thus ensures better reaction uniformity. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) were performed to characterize the synthesized rGO-SnO2 nanocomposites on carbon cloth. After CO2 tornado-type APPJ treatment, the pastes were converted into rGO-SnO2 nanocomposites for use as the active electrode materials of polyvinyl alcohol (PVA)-H2SO4 gel-electrolyte flexible supercapacitors (SCs). Various APPJ scanning times were tested to obtain SCs with optimized performance. With seven APPJ scans, the SC achieved the best areal capacitance of 37.17 mF/cm2 in Galvanostatic charging/discharging (GCD) and a capacitance retention rate of 84.2% after 10,000-cycle cyclic voltammetry (CV) tests. The capacitance contribution ratio, calculated as pseudocapacitance/electrical double layer capacitance (PC/EDLC), is ~50/50 as analyzed by the Trasatti method. GCD data were also analyzed to obtain Ragone plots; these indicated an energy density comparable to those of SCs processed using a fixed-point nitrogen APPJ in our previous study.

Microstructure and Properties of Ag-Doped ZnO Grown Hydrothermally on a Graphene-Coated Polyethylene Terephthalate Bilayer Flexible Substrate

Ag-doped ZnO nanorods growth on a PET-graphene substrate (Ag-ZnO/PET-GR) with different Ag-doped content were synthesized by low-temperature ion-sputtering-assisted hydrothermal synthesis method. The phase composition, morphologies of ZnO, and electrical properties were analyzed. Ag-doping affects the initially perpendicular growth of ZnO nanorods, resulting in oblique growth of ZnO nanorods becoming more obvious as the Ag-doped content increases, and the diameter of the nanorods decreasing gradually. The width of the forbidden band gap of the ZnO films decreases with increasing Ag-doped content. For the Ag-ZnO/PET-GR composite structure, the Ag-ZnO thin film with 5% Ag-doped content has the largest carrier concentration (8.1 × 10¹⁸ cm⁻³), the highest mobility (67 cm² · V⁻¹ · s⁻¹), a small resistivity (0.09 Ω·cm), and impressive electrical properties.

Nanoscale Bilayer Mechanical Lithography Using Water as Developer

Sustainability has become a critical concern in the semiconductor industry as hazardous wastes released during the manufacturing process of semiconductor devices have an adverse impact on human beings and the environment. The use of hazardous solvents in existing fabrication processes also restricts the use of polymer substrates because of their low chemical resistance to such solvents. Here, we demonstrate an environmentally friendly mechanical, bilayer lithography that uses just water for development and lift-off. We show that we are able to create arbitrary patterns achieving resolution down to 310 nm. We then demonstrate the use of this technique to create functional devices by fabricating a MoS₂ photodetector on a polyethylene terephthalate (PET) substrate with measured response times down to 42 ms.

Mild synthesis of superadhesive hydrogel electrolyte with low interfacial resistance and enhanced ionic conductivity for flexible zinc ion battery

Flexible aqueous battery is considered to be one of the most promising energy storage devices for powering flexible electronics. However, inferior interfacial compatibility in electrode-electrolyte interfaces and inefficient ionic channel of electrolytes usually result in potential troubles when applied in practical applications. Herein, we report a mild synthetic route to a sodium lignosulfonate-polyacrylamide hydrogel electrolyte with a high adhesiveness to achieve low electrode-electrolyte interfacial resistance and fast ionic conduction. Comprehensive experiments show that the catechol groups from sodium lignosulfonate demonstrate strong interactions with both cathode and anode materials, and thus greatly reduce the contact resistances across the electrodes. Meanwhile, the existence of sulfonate groups significantly enhances the ionic conductivity of the hydrogel electrolyte. Benefiting from this design, a low ohmic resistance of 3.8 Ω (i.e., 11.4 Ω cm² ), a low charge transfer resistance of 22.5 Ω (i.e., 67.5 Ω cm² ), a high ionic conductivity of 31.1 mS cm^-1 as well as a 100% capacity retention upon harsh bending deformation can be realized in the flexible zinc ion battery, which are significantly superior to those in the traditional candidates. The present investigation provides new insight into addressing the interfacial issue plaguing flexible energy storage devices.

Nitrogen, sulfur co-doped hierarchical carbon encapsulated in graphene with "sphere-in-layer" interconnection for high-performance supercapacitor

Rational design of electrode with hierarchical charge-transfer structure and good electronic conductivity is important to achieve high specific capacitance and energy density for supercapacitor, but it still remains a challenge. Herein, a nitrogen, sulfur co-doped pollen-derived carbon/graphene (PCG) composite with interconnected "sphere-in-layer" structure was fabricated, in which hierarchically pollen-derived carbon microspheres can serve as "porous spacers" to prevent the agglomeration of graphene nanosheets. The optimized PCG composite prepared with 0.5 wt% of graphene oxide (PCG-0.5) exhibited high specific capacitance (420Fg^-1 at 1Ag^-1), rate performance (280Fg^-1 at 20Ag^-1), and excellent cycling stability with 94% of capacitance retention after 10,000 cycles. The symmetrical device delivered a remarkable energy density of 31.3Whkg^-1 in neutral medium. Moreover, density functional theory calculation revealed that PCG electrode possessed the accelerated charge transfer and enhanced electronic conductivity, thus ensuring a remarkable electrochemical performance. This work may afford an effective strategy for the development of biomass-derived carbon electrodes with novel charge-transfer structure toward supercapacitor applications.

One-Pot Synthesis of Polyoxometalate Decorated Polyindole for Energy Storage Supercapacitors

The demand for energy storage supercapacitor devices has increased interest in completing all innovative technologies and renewable energy requirements. Here, we report a simple method of two polyoxomolybdate (H₄[PVMo₁₁O₄₀] and H₅[PV₂Mo₁₀O₄₀]) doped polyindole (PIn) composites for electrochemical supercapacitors. The interactions between polyoxomolybdates and PIn were measured by Fourier transform infrared spectroscopy (FTIR), and powder XRD, and stability was measured by thermogravimetry. The field emission scanning microscopy (FESEM) was employed to investigate the morphology of the materials. The electrochemical measurements show that the PIn/PV₂Mo₁₀ electrode exhibits a higher capacitance of 198.09 F/g with an energy density of 10.19 Wh/kg and a power density of 198.54 W/kg at 0.2 A/g current density than the PIn/PVMo₁₁ electrode. Both electrodes show a pseudocapacitance behavior due to the doping of redox-active polyoxomolybdates on the PIn surface and enhance the electrochemical properties. The electrodes' capacitive nature was measured by electrochemical impedance spectroscopy (EIS), which shows that the PIn/PVMo₁₁ electrode has a resistive nature within the electrode-electrode interface. Moreover, the PIn/PV₂Mo₁₀ electrode offers remarkable cycle stability, retaining ∼84% of its capacitance after 10,000 cycles (∼83% for the PIn/PVMo₁₁ electrode). The higher specific capacitance, faster charge/discharge rates, and higher cycle stability make them promising electrodes in supercapacitors.

A Layer-by-Layer Assembly Route to Electroplated Fibril-Based 3D Porous Current Collectors for Energy Storage Devices

Electrical conductivity, mechanical flexibility, and large electroactive surface areas are the most important factors in determining the performance of various flexible electrodes in energy storage devices. Herein, a layer-by-layer (LbL) assembly-induced metal electrodeposition approach is introduced to prepare a variety of highly porous 3D-current collectors with high flexibility, metallic conductivity, and large surface area. In this study, a few metal nanoparticle (NP) layers are LbL-assembled onto insulating paper for the preparation of conductive paper. Subsequent Ni electroplating of the metal NP-coated substrates reduces the sheet resistance from ≈10³ to <0.1 Ω sq^-1 while maintaining the porous structure of the pristine paper. Particularly, this approach is completely compatible with commercial electroplating processes, and thus can be directly extended to electroplating applications using a variety of other metals in addition to Ni. After depositing high-energy MnO NPs onto Ni-electroplated papers, the areal capacitance increases from 68 to 811 mF cm^-2 as the mass loading of MnO NPs increases from 0.16 to 4.31 mg cm^-2 . When metal NPs are periodically LbL-assembled with the MnO NPs, the areal capacitance increases to 1710 mF cm^-2 .

Robust Graphene@PPS Fibrous Membrane for Harsh Environmental Oil/Water Separation and All-Weather Cleanup of Crude Oil Spill by Joule Heat and Photothermal Effect

The cleanup of oily wastewater and crude-oil spills is a global challenge. Traditional membrane materials are inefficient for oil/water separation under harsh conditions and limited by sorption speeds because of the high viscosity of crude oil. Herein, a kind of Graphene-wrapped polyphenylene sulfide fibrous membrane with superior chemical resistance and hydrophobicity for efficient oil/water separation and fast adsorption of crude oil all-weather is reported. The reduced graphene oxide (rGO)@polyphenylene sulfide (PPS) fibrous membrane can be applied in the various harsh conditions with Joule heating and solar heating. In addition, the oil(dichloromethane)/water separation flux of rGO@PPS reached 12 903 L m^-2h^-1, and the separation efficiency reached 99.99%. After 10 cycles, the rGO@PPS still performed high separation flux and filtration efficiency. More importantly, the rGO@PPS still retained its high conductivity, excellent filtration efficiency, and stable hydrophobicity after acid or alkali treatment. Moreover, the rGO@PPS can be heated by solar energy to absorb viscous crude oil during the day, while at night, the crude oil can be adsorbed by Joule heating. The time to adsorb crude oil can be reduced by 98.6% and 97.3% through Joule heating and solar heating, respectively. This all-weather utilization greatly increases the adsorption efficiency and effectively reduces energy consumption.

Self-Supported Sheets-on-Wire CuO@Ni(OH)2/Zn(OH)2 Nanoarrays for High-Performance Flexible Quasi-Solid-State Supercapacitor

Transition metal hydroxides have attracted a lot of attention as the electrode materials for supercapacitors owing to their relatively high theoretical capacity, low cost, and facile preparation methods. However, their low intrinsic conductivity deteriorates their high-rate performance and cycling stability. Here, self-supported sheets-on-wire CuO@Ni(OH)2/Zn(OH)2 (CuO@NiZn) composite nanowire arrays were successfully grown on copper foam. The CuO nanowire backbone provided enhanced structural stability and a highly efficient electron-conducting pathway from the active hydroxide nanosheets to the current collector. The resulting CuO@NiZn as the battery-type electrode for supercapacitor application delivered a high capacity of 306.2 mAh g−1 at a current density of 0.8 A g−1 and a very stable capacity of 195.1 mAh g−1 at 4 A g−1 for 10,000 charge–discharge cycles. Furthermore, a quasi-solid-state hybrid supercapacitor (qss HSC) was assembled with active carbon, exhibiting 125.3 mAh g−1 at 0.8 A g−1 and a capacity of 41.6 mAh g−1 at 4 A g−1 for 5000 charge–discharge cycles. Furthermore, the qss HSC was able to deliver a high energy density of about 116.0 Wh kg−1. Even at the highest power density of 7.8 kW kg−1, an energy density of 20.5 Wh kg−1 could still be obtained. Finally, 14 red light-emitting diodes were lit up by a single qss HSC at different bending states, showing good potential for flexible energy storage applications.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

Physicochemical properties and performance of graphene oxide/polyacrylonitrile composite fibers as supercapacitor electrode materials

Graphene oxide derived from palm kernel shells (rGOPKS) and polyacrylonitrile (PAN) were electrospun into composite fiber mats and evaluated as supercapacitor electrode materials. Their morphologies and crystalline properties were examined, and chemical interactions between rGOPKS and PAN were investigated. The diameters of individual fibers in the rGOPKS/PAN composite mats ranged from 1.351 to 1506 μm and increased with increasing rGOPKS content. A broad peak centered near 23° in the X-ray diffraction (XRD) pattern of rGOPKS corresponded to the (002) planes in graphitic carbon. Characteristic rGOPKS and PAN peaks were observed in the XRD patterns of all the composite fibers, and their Fourier-transform infrared (FTIR) spectra indicated hydrogen bond formation between rGOPKS and PAN. The composite fiber mats had smooth and homogeneous surfaces, and they exhibited excellent flexibility and durability. Their electrochemical performance as electrodes was assessed, and a maximum specific capacitance of 203 F g-1 was achieved. The cycling stability of this electrode was excellent, and it retained over 90% of its capacitance after 5000 cycles. The electrode had an energy density of 17 W h kg-1 at a power density of 3000 W kg-1. Dielectric results showed a nanofiber composite dielectric constant of 72.3 with minor leakage current (tan δ) i.e., 0.33 at 51 Hz. These results indicate that the rGOPKS/PAN composite fibers have great promise as supercapacitor electrode materials.

Supercapacitor electrode materials: addressing challenges in mechanism and charge storage

In recent years, rapid technological advances have required the development of energy-related devices. In this regard, Supercapacitors (SCs) have been reported to be one of the most potential candidates to meet the demands of human’s sustainable development owing to their unique properties such as outstanding cycling life, safe operation, low processing cost, and high power density compared to the batteries. This review describes the concise aspects of SCs including charge-storage mechanisms and scientific principles design of SCs as well as energy-related performance. In addition, the most important performance parameters of SCs, such as the operating potential window, electrolyte, and full cell voltage, are reviewed. Researches on electrode materials are crucial to SCs because they play a pivotal role in the performance of SCs. This review outlines recent research progress of carbon-based materials, transition metal oxides, sulfides, hydroxides, MXenes, and metal nitrides. Finally, we give a brief outline of SCs’ strategic direction for future growth.

Simultaneous Electrospinning and Electrospraying for the Preparation of a Precursor Membrane Containing Hydrothermally Generated Biochar Particles to Produce the Value-Added Product of Carbon Nanofibrous Felt

Biochar is a byproduct generated from the hydrothermal liquefaction of biomass, such as corn stover, in an anaerobic environment. This work aims to convert biochar into a value-added product of carbon nanofibrous felt. First, the biochar-containing precursor membrane was prepared from simultaneous electrospinning and electrospraying. After thermal stabilization in air and carbonization in argon, the obtained precursor membrane was converted into a mechanically flexible and robust carbon nanofibrous felt. Electrochemical results revealed that the biochar-derived carbon nanofibrous felt might be a good candidate as a supercapacitor electrode with a good rate capability and high kinetic performance.

Controlling the flake size of bifunctional 2D WSe2 nanosheets as flexible binders and supercapacitor materials

A new approach using graphene as a conductive binder in electrical supercapacitors has recently been proposed. Graphene shows outstanding properties as a conductive binder, and can be used to replace conductive, additive, and polymer binders. However, graphene follows an EDLC behaviour, which may limit its electrochemical performance. In the process described in this work, we introduced WSe2 nanoflakes as a new approach to using pseudocapacitive materials as binders. The WSe2 nanoflakes were produced through liquid phase exfoliation of bulk WSe2, and the flake size was finely selected using a controlled centrifugation speed. The physical and electrochemical properties of the exfoliated WSe2 flakes were analysed; it was found that the smallest flakes (an average flake size of 106 nm) showed outstanding electrochemical properties, expanding our understanding of transition metal dichalcogenide (TMD) materials, and we were able to demonstrate the applicability of using WSe2 as a binder in supercapacitor electrodes. We also successfully replaced conductive additives and polymer binders with WSe2. The overall performance was improved: capacitance was enhanced by 35%, charge transfer resistance reduced by 73%, and self-discharge potential improved by 9%. This study provides an alternative application of using TMD materials as pseudo capacitive binders, which should lead to the continued development of energy storage technology.

One-spot synthesis of FeOOH/rGO composites by ferrous-ion-induced self-assembly of graphene oxides with different degrees of oxidation

In this study, graphene oxide sheets with different oxidation degrees were reduced by ferrous ion for coating FeOOH nano particles on reduced graphene oxide (rGO) matrix to synthesize FeOOH/rGO composites. The effect of the degree of oxidation on the morphology and chemical structure of FeOOH/rGO was studied using scanning electron microscopy, Raman spectroscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller surface area analysis. The particle size of FeOOH crystallites was approximately 100 nm, and they were distributed uniformly on the surface and in the pores of FeOOH/rGO. FeOOH/rGO prepared with mildly oxidized graphite had fewer defects, higher specific surface area, and higher FeOOH content than FeOOH/rGO prepared with highly oxidized graphite. These features resulted in better electrochemical properties, such as larger specific capacitance and lower charge transfer resistance.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

Ultrastable Zinc Anodes Enabled by Anti-Dehydration Ionic Liquid Polymer Electrolyte for Aqueous Zn Batteries

The side reaction and dendrite of a zinc anode in an aqueous electrolyte represent a huge obstacle for the development of rechargeable aqueous Zn batteries. An electrolyte with confined water is recognized to fundamentally stabilize the zinc anode. This work proposes acetamide/zinc perchlorate hexahydrate (AA/ZPH) ionic liquid (IL)-polyacrylamide (PAM) polymer electrolytes, here defined as IL-PAM. The novel Zn²⁺-conducting IL is able to accommodate trace water and can achieve both high conductivity (15.02 mS cm^-1) and alleviation of side reactions (>90% reduction). Cross-linked PAM acts as the three-dimensional framework to suppress dendrites and obtain flexibility. As a result, the Zn anode with IL-PAM can cycle stably over 2000 h with a record highest cumulative capacity of 3000 mAh cm^-2 and well-preserved morphology. Based on IL-PAM, the flexible LFP|Zn hybrid batteries can be successfully assembled and operate normally in series and parallel conditions. Moreover, the low volatility of IL and binding forces exerted by the PAM network endues IL-PAM with an anti-dehydration property. In a 50 °C unsealed environment, the weight loss of IL-PAM is about two-fifths of PAM hydrogel and an aqueous electrolyte, and the corresponding hybrid battery with IL-PAM can also prolong a 4 times longer lifespan.

Environmental transformation of graphene oxide in the aquatic environment

In recent years, research on graphene oxide (GO) has developed rapidly in both academic and industrial applications such as electronic, biosensor, drug delivery, water treatment and so forth. Based on the large amount of applications, it is anticipated that GO will inevitably find its own way to the environment, if used are not restricted to prevent their release. Environmental transformation is an important transformation process in the natural environment. In this review, we will summarize the recent developments on environmental transformation of GO in the aquatic environment. Although papers on environmental transformation of graphene-based nanomaterials can be found, a systematic picture describing photo-transformation of GO (dividing into different irradiation sources), environmental transformation of GO in the dark environmental, the environmental toxicity of GO are still lacking. Thus, it is essential to summarize how different light sources will affect the GO structure and reactive oxygen species generation in the photo-transformation process, how GO will react with various natural constituents in the aquatic environment, whether GO will toxic to different aquatic organisms and what will be the interactions between GO and the intracellular receptors in the intracellular level once GO released into the aquatic environment. This review will arouse the realization of potential risk that GO can bring to the aquatic environment and enlighten us to pay attention to behaviors of other two-dimensional GO-like nanomaterials, which have been intensively applied and studied in recent years.

Fabrication of ternary composites with polymeric carbon nitride/MoS2/reduced graphene oxide ternary hybrid aerogel as high-performance electrode materials for supercapacitors

Presenting a remarkable ternary hybrid aerogel, as an excellent electrode material with a specific capacitance of 467 Fg−1 and capacitance retention upto 80.4% even after 2000 cycles, demonstrating good stability and improved cyclic performance.