Enzymatic conversion of carbon dioxide

Visible-light driven boosting electron-hole separation in CsPbBr3 QDs@2D Cu-TCPP heterojunction and the efficient photoreduction of CO2

CsPbBr₃ quantum dots (CPB QDs) have great potential in photoreduction of CO₂ to chemical fuels. However, the low charge transportation efficiency and chemical instability of CPB QDs presents a considerable challenge. Herein, we describe the electrostatic assemblies of negatively charged colloidal two dimensional (2D) Cu-Tetrakis(4-carboxyphenyl) porphyrins (Cu-TCPP) nanosheets and positively CPB QDs to construct the hydride heterojunction. The photogenerated electron migration from CPB QDs to Cu-TCPP nanosheets has been witnessed, providing the supply of long-lived electrons for the reduction of CO₂ molecules adsorbed on Cu-TCPP matrix. As a direct result, The CPB@Cu-TCPP-x (x wt% of CPB QDs) photocatalysts exhibit significantly enhanced photocatalytic conversion of CO₂, compared to the parent Cu-TCPP nanosheets or single CPB QDs. Especially, when with 20% CPB QDs, the heterostruture system achieves an evolution yield of 287.08 µmol g^-1 in 4 h with highly CO selectivity (99%) under visible light irradiation, which is equivalent to a 3.87-fold improvement compared to the pristine CPB QDs. Meanwhile, the CH₄ generation rate can be up to 3.25 µmol g^-1. This optimized construction of heterostructure could provide a platform to funnel photoinduced electrons to the reaction center, which can both act as a crucial capture and the reaction actives of CO₂.

Developing and Regenerating Cofactors for Sustainable Enzymatic CO2 Conversion

Enzymatic CO2 conversion offers a promising strategy for alleviating global warming and promoting renewable energy exploitation, while the high cost of cofactors is a bottleneck for large-scale applications. To address the challenge, cofactor regeneration is usually coupled with the enzymatic reaction. Meanwhile, artificial cofactors have been developed to further improve conversion efficiency and decrease cost. In this review, the methods, such as enzymatic, chemical, electrochemical, and photochemical catalysis, developed for cofactor regeneration, together with those developed artificial cofactors, were summarized and compared to offer a solution for large-scale enzymatic CO2 conversion in a sustainable way.

Carbonic anhydrase for CO2 capture, conversion and utilization

Carbonic anhydrase (CA) enzymes, catalyzing the CO₂ hydration at a high turnover number, can be employed in expediting CO₂ capture, conversion and utilization to aid in carbon neutrality. Despite extensive research over the last decade, there remain challenges in CA-related technologies due to poor stability and suboptimal use of CAs. Herein, we discuss recent advances in CA stabilization by protein engineering and enzyme immobilization, and shed light on state-of-the-art of in vitro and in vivo CA-mediated CO₂ conversion for improved production of value-added chemicals using CO₂ as a feedstock.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

Conversion of CO2 to epoxides or oxazolidinones enabled by a CuI/CuII-organic framework bearing a tri-functional linker

One mixed-valence Cu–MOF has been synthesized, which could prompt the conversion of CO2 to epoxides and oxazolidinones under mild conditions.

Mo3(C6O6)2 monolayer as a promising electrocatalyst for the CO2 reduction reaction: a first-principles study

Mo3(C6O6)2 monolayers are potential electrocatalysts for CO2 reduction reaction (CRR). The electrochemical performances can be further improved by coordinating with hydroxyl groups, which show improved performance for the production of methane.

Technologies and perspectives for achieving carbon neutrality

Global development has been heavily reliant on the overexploitation of natural resources since the Industrial Revolution. With the extensive use of fossil fuels, deforestation, and other forms of land-use change, anthropogenic activities have contributed to the ever-increasing concentrations of greenhouse gases (GHGs) in the atmosphere, causing global climate change. In response to the worsening global climate change, achieving carbon neutrality by 2050 is the most pressing task on the planet. To this end, it is of utmost importance and a significant challenge to reform the current production systems to reduce GHG emissions and promote the capture of CO2 from the atmosphere. Herein, we review innovative technologies that offer solutions achieving carbon (C) neutrality and sustainable development, including those for renewable energy production, food system transformation, waste valorization, C sink conservation, and C-negative manufacturing. The wealth of knowledge disseminated in this review could inspire the global community and drive the further development of innovative technologies to mitigate climate change and sustainably support human activities.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Recent Advances in Interface Engineering for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO₂ reduction reaction (CO₂RR) can store and transform the intermittent renewable energy in the form of chemical energy for industrial production of chemicals and fuels, which can dramatically reduce CO₂ emission and contribute to carbon-neutral cycle. Efficient electrocatalytic reduction of chemically inert CO₂ is challenging from thermodynamic and kinetic points of view. Therefore, low-cost, highly efficient, and readily available electrocatalysts have been the focus for promoting the conversion of CO₂. Very recently, interface engineering has been considered as a highly effective strategy to modulate the electrocatalytic performance through electronic and/or structural modulation, regulations of electron/proton/mass/intermediates, and the control of local reactant concentration, thereby achieving desirable reaction pathway, inhibiting competing hydrogen generation, breaking binding-energy scaling relations of intermediates, and promoting CO₂ mass transfer. In this review, we aim to provide a comprehensive overview of current developments in interface engineering for CO₂RR from both a theoretical and experimental standpoint, involving interfaces between metal and metal, metal and metal oxide, metal and nonmetal, metal oxide and metal oxide, organic molecules and inorganic materials, electrode and electrolyte, molecular catalysts and electrode, etc. Finally, the opportunities and challenges of interface engineering for CO₂RR are proposed.

Recent advances in (chemo)enzymatic cascades for upgrading bio-based resources

Developing (chemo)enzymatic cascades is very attractive for green synthesis, because they streamline multistep synthetic processes. In this Feature Article, we have summarized the recent advances in in vitro or whole-cell cascade reactions with a focus on the use of renewable bio-based resources as starting materials. This includes the synthesis of rare sugars (such as ketoses, L-ribulose, D-tagatose, myo-inositol or aminosugars) from readily available carbohydrate sources (cellulose, hemi-cellulose, starch), in vitro enzyme pathways to convert glucose to various biochemicals, cascades to convert 5-hydroxymethylfurfural and furfural obtained from lignin or xylose into novel precursors for polymer synthesis, the syntheses of phenolic compounds, cascade syntheses of aliphatic and highly reduced chemicals from plant oils and fatty acids, upgrading of glycerol or ethanol as well as cascades to transform natural L-amino acids into high-value (chiral) compounds. In several examples these processes have demonstrated their efficiency with respect to high space-time yields and low E-factors enabling mature green chemistry processes. Also, the strengths and limitations are discussed and an outlook is provided for improving the existing and developing new cascades.

Influence of the Hypercapnic Tumor Microenvironment on the Viability of Hela Cells Screened by a CO2-Gradient-Generating Device

Carbon dioxide (CO₂) levels outside of the physiological range are frequently encountered in the tumor microenvironment and laparoscopic pneumoperitoneum during clinical cancer therapy. Controversies exist regarding the biological effects of hypercapnia on tumor proliferation and metastasis concerning time frame, CO₂ concentration, and cell type. Traditional control of gaseous microenvironments for cell growth is conducted using culture chambers that allow for a single gas concentration at a time. In the present paper, Hela cells were studied for their response to varying levels of CO₂ in an aerogel-based gas gradient-generating apparatus capable of delivering a stable and quantitative linear CO₂ profile in spatial and temporal domains. Cells cultured in the standard 96-well plate sandwiched in between the device were interfaced with the gas gradient generator, and the cells in each row were exposed to a known level of CO₂ accordingly. Both the ratiometric pH indicator and theoretical modeling have confirmed the efficient mass transport of CO₂ through the air-permeable aerogel monolith in a short period of time. Tumor cell behaviors in various hypercapnic microenvironments with gradient CO₂ concentrations ranging from 12 to 89% were determined in terms of viability, morphology, and mitochondrial metabolism under acute exposure for 3 h and over a longer cultivation period for up to 72 h. A significant reduction in cell viability was noticed with increasing CO₂ concentration and incubation time, which was closely associated with intracellular acidification and elevated cellular level of reactive oxygen species. Our modular device demonstrated full adaptability to the standard culture systems and high-throughput instruments, which provide the potential for simultaneously screening the responses of cells under tunable gaseous microenvironments.

The challenges of using NAD+-dependent formate dehydrogenases for CO2 conversion

In recent years, CO₂ reduction and utilization have been proposed as an innovative solution for global warming and the ever-growing energy and raw material demands. In contrast to various classical methods, including chemical, electrochemical, and photochemical methods, enzymatic methods offer a green and sustainable option for CO₂ conversion. In addition, enzymatic hydrogenation of CO₂ into platform chemicals could be used to produce economically useful hydrogen storage materials, making it a win-win strategy. The thermodynamic and kinetic stability of the CO₂ molecule makes its utilization a challenging task. However, Nicotine adenine dinucleotide (NAD⁺)-dependent formate dehydrogenases (FDHs), which have high selectivity and specificity, are attractive catalysts to overcome this issue and convert CO₂ into fuels and renewable chemicals. It is necessary to improve the stability, cofactor necessity, and CO₂ conversion efficiency of these enzymes, such as by combining them with appropriate hybrid systems. However, metal-independent, NAD⁺-dependent FDHs, and their CO₂ reduction activity have received limited attention to date. This review outlines the CO₂ reduction ability of these enzymes as well as their properties, reaction mechanisms, immobilization strategies, and integration with electrochemical and photochemical systems for the production of formic acid or formate. The biotechnological applications of FDH, future perspectives, barriers to CO₂ reduction with FDH, and aspects that must be further developed are briefly summarized. We propose that constructing hybrid systems that include NAD⁺-dependent FDHs is a promising approach to convert CO₂ and strengthen the sustainable carbon bio-economy.

Bio-conversion of CO2 into biofuels and other value-added chemicals via metabolic engineering

Carbon dioxide (CO₂) occurs naturally in the atmosphere as a trace gas, which is produced naturally as well as by anthropogenic activities. CO₂ is a readily available source of carbon that in principle can be used as a raw material for the synthesis of valuable products. The autotrophic organisms are naturally equipped to convert CO₂ into biomass by obtaining energy from sunlight or inorganic electron donors. This autotrophic CO₂ fixation has been exploited in biotechnology, and microbial cell factories have been metabolically engineered to convert CO₂ into biofuels and other value-added bio-based chemicals. A variety of metabolic engineering efforts for CO₂ fixation ranging from basic copy, paste, and fine-tuning approaches to engineering and testing of novel synthetic CO₂ fixing pathways have been demonstrated. In this paper, we review the current advances and innovations in metabolic engineering for bio-conversion of CO₂ into bio biofuels and other value-added bio-based chemicals.

Integrated catalytic insights into methanol production: Sustainable framework for CO2 conversion

A continuous increase in the amount of greenhouse gases (GHGs) is causing serious threats to the environment and life on the earth, and CO₂ is one of the major candidates. Reducing the excess CO₂ by converting into industrial products could be beneficial for the environment and also boost up industrial growth. In particular, the conversion of CO₂ into methanol is very beneficial as it is cheaper to produce from biomass, less inflammable, and advantageous to many industries. Application of various plants, algae, and microbial enzymes to recycle the CO₂ and using these enzymes separately along with CO₂-phillic materials and chemicals can be a sustainable solution to reduce the global carbon footprint. Materials such as MOFs, porphyrins, and nanomaterials are also used widely for CO₂ absorption and conversion into methanol. Thus, a combination of enzymes and materials which convert the CO₂ into methanol could energize the CO₂ utilization. The CO₂ to methanol conversion utilizes carbon better than the conventional syngas and the reaction yields fewer by-products. The methanol produced can further be utilized as a clean-burning fuel, in pharmaceuticals, automobiles and as a general solvent in various industries etc. This makes methanol an ideal fuel in comparison to the conventional petroleum-based ones and it is advantageous for a safer and cleaner environment. In this review article, various aspects of the circular economy with the present scenario of environmental crisis will also be considered for large-scale sustainable biorefinery of methanol production from atmospheric CO₂.

Highlights and challenges in the selective reduction of carbon dioxide to methanol

Carbon dioxide (CO₂) is the iconic greenhouse gas and the major factor driving present global climate change, incentivizing its capture and recycling into valuable products and fuels. The 6H⁺/6e^- reduction of CO₂ affords CH₃OH, a key compound that is a fuel and a platform molecule. In this Review, we compare different routes for CO₂ reduction to CH₃OH, namely, heterogeneous and homogeneous catalytic hydrogenation, as well as enzymatic catalysis, photocatalysis and electrocatalysis. We describe the leading catalysts and the conditions under which they operate, and then consider their advantages and drawbacks in terms of selectivity, productivity, stability, operating conditions, cost and technical readiness. At present, heterogeneous hydrogenation catalysis and electrocatalysis have the greatest promise for large-scale CO₂ reduction to CH₃OH. The availability and price of sustainable electricity appear to be essential prerequisites for efficient CH₃OH synthesis.

Enzymes for Efficient CO2 Conversion

The accumulation of carbon dioxide in the atmosphere as a result of human activities has caused a number of adverse circumstances in the world. For this reason, the proposed solutions lie within the aim of reducing carbon dioxide emissions have been quite valuable. However, as the human activity continues to increase on this planet, the possibility of reducing carbon dioxide emissions decreases with the use of conventional methods. The emergence of compounds than can be used in different fields by converting the released carbon dioxide into different chemicals will construct a fundamental solution to the problem. Although electro-catalysis or photolithography methods have emerged for this purpose, they have not been able to achieve successful results. Alternatively, another proposed solution are enzyme based systems. Among the enzyme-based systems, pyruvate decarboxylase, carbonic anhydrase and dehydrogenases have been the most studied enzymes. Pyruvate dehydrogenase and carbonic anhydrase have either been an expensive method or were incapable of producing the desired result due to the reaction cascade they catalyze. However, the studies reporting the production of industrial chemicals from carbon dioxide using dehydrogenases and in particular, the formate dehydrogenase enzyme, have been remarkable. Moreover, reported studies have shown the existence of more active and stable enzymes, especially the dehydrogenase family that can be identified from the biome. In addition to this, their redesign through protein engineering can have an immense contribution to the increased use of enzyme-based methods in CO₂ reduction, resulting in an enormous expansion of the industrial capacity.

Mechanisms of metal-dependent non-redox decarboxylases from quantum chemical calculations

Quantum chemical calculations are today an extremely valuable tool for studying enzymatic reaction mechanisms. In this mini-review, we summarize our recent work on several metal-dependent decarboxylases, where we used the so-called cluster approach to decipher the details of the reaction mechanisms, including elucidation of the identity of the metal cofactors and the origins of substrate specificity.

Decarboxylases are of growing potential for biocatalytic applications, as they can be used in the synthesis of novel compounds of, e.g., pharmaceutical interest. They can also be employed in the reverse direction, providing a strategy to synthesize value‐added chemicals by CO₂ fixation. A number of non-redox metal-dependent decarboxylases from the amidohydrolase superfamily have been demonstrated to have promiscuous carboxylation activities and have attracted great attention in the recent years. The computational mechanistic studies provide insights that are important for the further modification and utilization of these enzymes in industrial processes. The discussed enzymes are: 5‐carboxyvanillate decarboxylase, γ‐resorcylate decarboxylase, 2,3‐dihydroxybenzoic acid decarboxylase, and iso-orotate decarboxylase.

Architectural Design for Enhanced C2 Product Selectivity in Electrochemical CO2 Reduction Using Cu-Based Catalysts: A Review

Electrochemical CO₂ reduction to value-added chemicals and fuels is a promising approach to mitigate the greenhouse effect arising from anthropogenic CO₂ emission and energy shortage caused by the depletion of nonrenewable fossil fuels. The generation of multicarbon (C₂₊) products, especially hydrocarbons and oxygenates, is of great interest for industrial applications. To date, Cu is the only metal known to catalyze the C-C coupling in the electrochemical CO₂ reduction reaction (eCO₂RR) with appreciable efficiency and kinetic viability to produce a wide range of C₂ products in aqueous solutions. Nonetheless, poor product selectivity associated with Cu is the main technical problem for the application of the eCO₂RR technology on a global scale. Based on extensive research efforts, a delicate and rational design of electrocatalyst architecture using the principles of nanotechnology is likely to significantly affect the adsorption energetics of some key intermediates and hence the inherent reaction pathways. In this review, we summarize recent progress that has been achieved by tailoring the electrocatalyst architecture for efficient electrochemical CO₂ conversion to the target C₂ products. By considering the experimental and computational results, we further analyze the underlying correlations between the architecture of a catalyst and its selectivity toward C₂ products. Finally, the major challenges are outlined, and directions for future development are suggested.

Silk fibroin-derived carbon aerogels embedded with copper nanoparticles for efficient electrocatalytic CO2-to-CO conversion

Metal-carbon matrix catalyst has attracted a great deal of interest in electrochemical carbon dioxide reduction reaction (CO₂RR) due to its excellent electrocatalytic performance. However, the design of highly active metal-carbon matrix catalyst towards CO₂RR using natural biomass and cheap chemical precursors is still under challenge. Herein, a self-assembly strategy, along with CO₂ gas as acidifying agent, to fabricate silk fibroin (SF) derived carbon aerogels (CA) combining trace copper nanoparticles (SF-Cu/CA) is developed. Zinc nitrate was introduced as a pore-forming agent to further optimize the pore structure of the as-prepared catalysts to form SF-Cu/CA-1. The rich mesoporous structure and unique constitute of SF-Cu/CA-1 is conducive to exposed numerous active sites, fast electron transfer rate, and the desorption of *CO intermediate, thus leading to the electrocatalytic CO₂RR of SF-Cu/CA-1 catalyst with an excellent current density of 29.4 mA cm^-2, Faraday efficiency of 83.06% towards carbon monoxide (CO), high the ratio value of CO/H₂ (19.58), and a long-term stability over a 10-hour period. This performance is superior to that of SF-Cu/CA catalyst (13.0 mA cm^-2, FE_CO=58.43%, CO/H₂ = 2.16). This work not only offers a novel strategy using natural biomass and cheap chemicals to build metal-carbon matrix catalyst for electrocatalytic CO₂-to-CO conversion, but also is expected to promote the industrial-scale implementations of CO₂ electroreduction.

Immobilization of formate dehydrogenase in metal organic frameworks for enhanced conversion of carbon dioxide to formate

Hydrogenation of carbon dioxide (CO₂) to formic acid by the enzyme formate dehydrogenase (FDH) is a promising technology for reducing CO₂ concentrations in an environmentally friendly manner. However, the easy separation of FDH with enhanced stability and reusability is essential to the practical and economical implementation of the process. To achieve this, the enzyme must be used in an immobilized form. However, conventional immobilization by physical adsorption is prone to leaching, resulting in low stability. Although other immobilization methods (such as chemical adsorption) enhance stability, they generally result in low activity. In addition, mass transfer limitations are a major problem with most conventional immobilized enzymes. In this review paper, the effectiveness of metal organic frameworks (MOFs) is assessed as a promising alternative support for FDH immobilization. Kinetic mechanisms and stability of wild FDH from various sources were assessed and compared to those of cloned and genetically modified FDH. Various techniques for the synthesis of MOFs and different immobilization strategies are presented, with special emphasis on in situ and post synthetic immobilization of FDH in MOFs for CO₂ hydrogenation.

Directed Evolution of Propionyl-CoA Carboxylase for Succinate Biosynthesis

Due to low carboxylase activity, CO₂ biotransformation is challenging to achieve using natural CO₂ fixation pathways. Liu et al. have improved the activity of propionyl-CoA carboxylase (PCC) 94-fold, enabling the efficient synthesis of succinate from acetyl-CoA and paving the way for CO₂ assimilation via the 3-hydroxypropionate (3-HP) bicycle or 3-hydroxypropionate/4-hydroxybutyrate (3-HP/4-HB) cycle.

Regulating the electronic properties of MoSe2 to improve its CO2 electrocatalytic reduction performance via atomic doping

The atomic environment should heavily influence the performance of CO₂ reduction, and the regulated electronic property of reaction intermediates and metals (Cu) is responsible for the high catalytic performance of CH₄ production.

Biohybrid Cells for Photoelectrochemical Conversion Based on the HCOO--CO2 Circulation Approach

Biohybrid photoelectrochemical systems could combine the light-harvesting ability of semiconductor photocatalysts and the CO₂-processing capability of biocatalysts to realize CO₂ reduction. How to develop the energy-utilized model can be of importance for the mechanism exploration of photosynthesis. Here, a biohybrid photoelectrochemical system based on HCOO^--CO₂ circulation was developed to realize the conversion both of solar-to-electric energy and chemical-to-electric energy. The device consists of a TiO₂ nanoparticle photoanode and a laser-scribed graphene/formate dehydrogenase biocathode, which was utilized for the formic acid oxidation and the biocatalysis reduction of CO₂ to HCOO^-, respectively. The as-proposed biohybrid photoelectrochemical system exhibits good performance with an open-circuit potential of 0.93 V and a maximum power output density of 76 μW cm^-2. This ingenious strategy not only exploits a robust carbon circulation system for the conversion of solar energy but also provides a way of constructing complex artificial photosynthesis systems.

Protein-caged zinc porphyrin as a carbonic anhydrase mimic for carbon dioxide capture

Zinc tetraphenylporphyrin (Zn-TPP) solubilized by GroEL protein cage was prepared as a supramolecular mimic of carbonic anhydrase (CA) for CO2 capture. It is shown that the soluble Zn-TPP-GroEL complex can be formed easily by detergent dialysis. The Zn-TPP/GroEL binding ratio was found to increase with their dialysis ratio until reaching the maximum of about 30 porphyrins per protein cage. Moreover, the complex showed hydrase activity that catalyzes the CO2 hydration in HCO3- and H+. It is further seen that the catalytic activity of Zn-TPP-GroEL was about one-half of that of a bovine CA at 25 °C. On the other hand, as the temperature was increased to 60 °C close to an industrial CO2 absorption temperature, the natural enzyme lost function while Zn-TPP-GroEL exhibited better catalytic performance indicative of a higher thermal stability. Finally, we demonstrate that the GroEL-solubilized Zn-TPP is able to accelerate the precipitation of CO2 in the form of CaCO3 and has better long-term performance than the bovine CA. Thus a new type of nano-caged system mimicking natural CAs for potential applications in carbon capture has been established.

Organic synthesis of fixed CO2 using nitrogen as a nucleophilic center

In this review, recent progress in the application of CO2 as an electrophilic reagent and nitrogen as a nucleophilic center under different catalytic conditions in organic synthesis is summarized. The used catalytic methods in the reactions of CO2 and nitrogen are classified as metal catalysis, metal-free catalysis, photocatalysis and electrocatalysis. Various catalytic conditions have been used to solve the problems of thermodynamic properties and stability of CO2. The transformation mechanisms of these reactions are discussed.

Three-Dimensional Cathodes for Electrochemical Reduction of CO2: From Macro- to Nano-Engineering

Rising anthropogenic CO2 emissions and their climate warming effects have triggered a global response in research and development to reduce the emissions of this harmful greenhouse gas. The use of CO2 as a feedstock for the production of value-added fuels and chemicals is a promising pathway for development of renewable energy storage and reduction of carbon emissions. Electrochemical CO2 conversion offers a promising route for value-added products. Considerable challenges still remain, limiting this technology for industrial deployment. This work reviews the latest developments in experimental and modeling studies of three-dimensional cathodes towards high-performance electrochemical reduction of CO2. The fabrication-microstructure-performance relationships of electrodes are examined from the macro- to nanoscale. Furthermore, future challenges, perspectives and recommendations for high-performance cathodes are also presented.

The Active Center of Co-N-C Electrocatalysts for the Selective Reduction of CO2 to CO Using a Nafion-H Electrolyte in the Gas Phase

To contribute a solution for the global warming problem, the selective electrochemical reduction of CO₂ to CO was studied in the gas phase using a [CO₂(g), Co-N-C cathode | Nafion-H | Pt/C anode, H₂/water] system without using carbonate solutions. The Co-N-C electrocatalysts were synthesized by partial pyrolysis of precursors in inert gas, which were prepared from various N-bidentate ligands, Co(NO₃)₂, and Ketjenblack (KB). The most active electrocatalyst was Co-(4,4'-dimethyl-2,2'-bipyridine)/KB pyrolyzed at 673 K, denoted Co-4,4'-dmbpy/KB(673K). A high performance of CO formation (331 μmol h^-1 cm^-2, 217 TOF h^-1) at 0.020 A cm^-2 with 78% current efficiency was obtained at -0.75 V (SHE) and 273 K under strong acidic conditions of Nafion-H. Characterization studies using extended X-ray absorption fine structure (EXAFS), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy-energy-dispersive X-ray (TEM-EDX), X-ray diffraction (XRD), and temperature-programmed desorption with mass spectrometry (TPD-MS) indicated the active site as Co coordinated with four N atoms bonding the surface of KB, abbreviated Co-N₄-C _x structure. A model of the reduction mechanism of CO₂ on the active site was proposed.

Alternative Fuels for Internal Combustion Engines

The recent transport electrification trend is pushing governments to limit the future use of Internal Combustion Engines (ICEs). However, the rationale for this strong limitation is frequently not sufficiently addressed or justified. The problem does not seem to lie within the engines nor with the combustion by themselves but seemingly, rather with the rise in greenhouse gases (GHG), namely CO2, rejected to the atmosphere. However, it is frequent that the distinction between fossil CO2 and renewable CO2 production is not made, or even between CO2 emissions and pollutant emissions. The present revision paper discusses and introduces different alternative fuels that can be burned in IC Engines and would eliminate, or substantially reduce the emission of fossil CO2 into the atmosphere. These may be non-carbon fuels such as hydrogen or ammonia, or biofuels such as alcohols, ethers or esters, including synthetic fuels. There are also other types of fuels that may be used, such as those based on turpentine or even glycerin which could maintain ICEs as a valuable option for transportation.

Organic-Inorganic Hybrid Nanomaterials for Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction (ECR) to value-added chemicals and fuels is regarded as an effective strategy to mitigate climate change caused by CO₂ from excess consumption of fossil fuels. To achieve CO₂ conversion with high faradaic efficiency, low overpotential, and excellent product selectivity, rational design and synthesis of efficient electrocatalysts is of significant importance, which dominates the development of ECR field. Individual organic molecules or inorganic catalysts have encountered a bottleneck in performance improvement owing to their intrinsic shortcomings. Very recently, organic-inorganic hybrid nanomaterials as electrocatalysts have exhibited high performance and interesting reaction processes for ECR due to the integration of the advantages of both heterogeneous and homogeneous catalytic processes, attracting widespread interest. In this work, the recent advances in designing various organic-inorganic hybrid nanomaterials at the atomic and molecular level for ECR are systematically summarized. Particularly, the reaction mechanism and structure-performance relationship of organic-inorganic hybrid nanomaterials toward ECR are discussed in detail. Finally, the challenges and opportunities toward controlled synthesis of advanced electrocatalysts are proposed for paving the development of the ECR field.

Electrochemical Reactors for CO2 Conversion

Increasing risks from global warming impose an urgent need to develop technologically and economically feasible means to reduce CO2 content in the atmosphere. Carbon capture and utilization technologies and carbon markets have been established for this purpose. Electrocatalytic CO2 reduction reaction (CO2RR) presents a promising solution, fulfilling carbon-neutral goals and sustainable materials production. This review aims to elaborate on various components in CO2RR reactors and relevant industrial processing. First, major performance metrics are discussed, with requirements obtained from a techno-economic analysis. Detailed discussions then emphasize on (i) technical benefits and challenges regarding different reactor types, (ii) critical features in flow cell systems that enhance CO2 diffusion compared to conventional H-cells, (iii) electrolyte and its effect on liquid phase electrolyzers, (iv) catalysts for feasible products (carbon monoxide, formic acid and multi-carbons) and (v) strategies on flow channel and anode design as next steps. Finally, specific perspectives on CO2 feeds for the reactor and downstream purification techniques are annotated as part of the CO2RR industrial processing. Overall, we focus on the component and system aspects for the design of a CO2RR reactor, while pointing out challenges and opportunities to realize the ultimate goal of viable carbon capture and utilization technology.

Exploration of New Biomass-Derived Solvents: Application to Carboxylation Reactions

A range of hitherto unexplored biomass-derived chemicals have been evaluated as new sustainable solvents for a large variety of CO2 -based carboxylation reactions. Known biomass-derived solvents (biosolvents) are also included in the study and the results are compared with commonly used solvents for the reactions. Biosolvents can be efficiently applied in a variety of carboxylation reactions, such as Cu-catalyzed carboxylation of organoboranes and organoboronates, metal-catalyzed hydrocarboxylation, borocarboxylation, and other related reactions. For many of these reactions, the use of biosolvents provides comparable or better yields than the commonly used solvents. The best biosolvents identified are the so far unexplored candidates isosorbide dimethyl ether, acetaldehyde diethyl acetal, rose oxide, and eucalyptol, alongside the known biosolvent 2-methyltetrahydrofuran. This strategy was used for the synthesis of the commercial drugs Fenoprofen and Flurbiprofen.

Design of a Graphene Nitrene Two-Dimensional Catalyst Heterostructure Providing a Well-Defined Site Accommodating One to Three Metals, with Application to CO2 Reduction Electrocatalysis for the Two-Metal Case

Recently, the reduction of CO₂ to fuels has been the subject of numerous studies, but the selectivity and activity remain inadequate. Progress has been made on single-site two-dimensional catalysts based on graphene coupled to a metal and nitrogen for the CO₂ reduction reaction (CO₂RR); however, the product is usually CO, and the metal-N environment remains ambiguous. We report a novel two-dimensional graphene nitrene heterostructure (grafiN₆) providing well-defined active sites (N₆) that can bind one to three metals for the CO₂RR. We find that homobimetallic FeFe-grafiN₆ could reduce CO₂ to CH₄ at -0.61 V and to CH₃CH₂OH at -0.68 V versus reversible hydrogen electrode, with high product selectivity. Moreover, the heteronuclear FeCu-grafiN₆ system may be significantly less affected by hydrogen evolution reaction, while maintaining a low limiting potential (-0.68 V) for C1 and C2 mechanisms. Binding metals to one N₆ site but not the other could promote efficient electron transport facilitating some reaction steps. This framework for single or multiple metal sites might also provide unique catalytic sites for other catalytic processes.