On-surface synthesis and characterization of teranthene and hexanthene: ultrashort graphene nanoribbons with mixed armchair and zigzag edges

Graphene nanoribbons (GNRs) exhibit a broad range of physicochemical properties that critically depend on their width and edge topology. GNRs with armchair edges (AGNRs) are usually more stable than their counterparts with zigzag edges (ZGNRs) where the low-energy spin-polarized edge states render the ribbons prone to being altered by undesired chemical reactions. On the other hand, such edge-localized states make ZGNRs highly appealing for applications in spintronic and quantum technologies. For GNRs fabricated via on-surface synthesis under ultrahigh vacuum conditions on metal substrates, the expected reactivity of zigzag edges is a serious concern in view of substrate transfer and device integration under ambient conditions, but corresponding investigations are scarce. Using 10-bromo-9,9':10',9''-teranthracene as a precursor, we have thus synthesized hexanthene (HA) and teranthene (TA) as model compounds for ultrashort GNRs with mixed armchair and zigzag edges, characterized their chemical and electronic structure by means of scanning probe methods, and studied their chemical reactivity upon air exposure by Raman spectroscopy. We present a detailed identification of molecular orbitals and vibrational modes, assign their origin to armchair or zigzag edges, and discuss the chemical reactivity of these edges based on characteristic Raman spectral features.

On-surface synthesis of nitrogen-doped nanographene with an [18]annulene pore on Ag(111)

On-surface synthesis is of importance to fabricate low dimensional carbon-based nanomaterials with atomic precision. Here, we synthesize nitrogen-doped nanographene with an [18]annulene pore and its dimer through sequential reactions of debromination, aryl-aryl coupling, cyclodehydrogenation and C-N coupling on Ag(111) from 3,12-dibromo-7,8-diaza[5]helicene. The inner structures of the products were characterized with scanning tunneling microscopy with a CO terminated tip at low temperature. Furthermore, the first four unoccupied electronic states of the nanographene were investigated with a combination of scanning tunneling spectroscopy and theoretical calculations. Except for the LUMO + 2 state observed at +1.3 V, the electronic states at 500 mV, 750 mV and 1.9 V were attributed to the superatom molecular orbitals at the [18]annulene pore, which were significantly shifted towards the Fermi level due to the hybridization with the confined surface state.

Functionalization of Pentacene: A Facile and Versatile Approach to Contorted Polycyclic Aromatic Hydrocarbons

In this work, a facile and versatile strategy for the synthesis of contorted polycyclic aromatic hydrocarbons (PAHs) starting from the functionalized pentacene was established. A series of novel PAHs 1-4 and their derivatives were synthesized through a simple two-step synthesis procedure involving an intramolecular reductive Friedel-Crafts cyclization of four newly synthesized pentacene aldehydes 5-8 as a key step. All the molecules were confirmed by single-crystal X-ray diffraction and their photophysical and electrochemical properties were studied in detail. Interestingly, the most striking feature of 1-4 is their highly contorted carbon structures and the accompanying helical chirality. In particular, the optical resolution of 2 was successfully achieved by chiral-phase HPLC, and the enantiomers were characterized by circular dichroism and circularly polarized luminescence spectroscopy. Despite the highly nonplanar conformations, these contorted PAHs exhibited emissive properties with moderate-to-good fluorescence quantum yields, implying the potential utility of this series PAHs as high-quality organic laser dyes. By using a self-assembly method with the help of epoxy resin, a bottle microlaser based on 3 a was successfully illustrated with a lasing wavelength of 567.8 nm at a threshold of 0.3 mJ/cm2 . We believe that this work will shed light on the chemical versatility of pentacene and its derivatives in the construction of novel functionalized PAHs.

Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments (9-AGNR/cGNR). The synthesis involves a controlled Suzuki-Miyaura catalyst-transfer polymerization (SCTP) between 2-(6'-bromo-4,4''-ditetradecyl-[1,1':2',1''-terphenyl]-3'-yl) boronic ester (M1) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester (M2), followed by the Scholl reaction of the obtained block copolymer (poly-M1/M2) with controlled Mn (18 kDa) and narrow Đ (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).

Iodide-Dependent Selective Dehydroaromatization Affording Maleimide-Fused 9,10-Phenanthrenes and Their Analogues

A novel and selective synthesis of polycyclic fused maleimides from easily available raw materials under metal-free conditions is presented. This cascade protocol involves self-condensation of cyclohexanones, followed by Diels-Alder reaction with maleimides, intramolecular dehydration, and selective dehydroaromatization in a one-pot fashion, affording maleimide-fused 9,10-phenanthrenes and their analogues in satisfactory yields. Notably, iodide reagents play a critical role in switching the selectivity toward full or partial dehydrogenation compounds.

Buckybowl and its chiral hybrids featuring eight-membered rings and helicene units

Here we report the synthesis of a novel buckybowl (7) with a high bowl-to-bowl inversion barrier (ΔG‡ = 38 kcal mol-1), which renders the rate of inversion slow enough at room temperature to establish two chiral polycyclic aromatic hydrocarbons (PAHs). By strategic fusion of eight-membered rings to the rim of 7, the chiral hybrids 8 and 9 are synthesized and display helicity and positive and negative curvature, allowing the enantiomers to be configurationally stable and their chiroptical properties are thoroughly examined. Computational and experimental studies reveal the enantiomerization mechanisms for the chiral hybrids and demonstrate that the eight-membered ring strongly affects the conformational stability. Because of its static and doubly curved conformation, 9 shows a high binding affinity towards C60. The OFET performance of 7-9 could be tuned and the hybrids show ambipolar characteristics. Notably, the 9·C60 cocrystal exhibits well-balanced ambipolar performance with electron and hole mobilities of up to 0.19 and 0.11 cm2 V-1 s-1, respectively. This is the first demonstration of a chiral curved PAH and its complex with C60 for organic devices. Our work presents new insight into buckybowl-based design of PAHs with configurational stability and intriguing optoelectronic properties.

Solid-state mechanochemical cross-coupling of insoluble substrates into insoluble products by removable solubilizing silyl groups: uniform synthesis of nonsubstituted linear oligothiophenes

Conventional solution-based organic reactions that involve insoluble substrates are challenging and inefficient. Furthermore, even if the reaction is successful, the corresponding products are insoluble in most cases, making their isolation and subsequent transformations difficult. Hence, the conversion of insoluble compounds into insoluble products remains a challenge in practical synthetic chemistry. In this study, we showcase a potential solution to address these solubility issues by combining a mechanochemical cross-coupling approach with removable solubilizing silyl groups. Our strategy involves solid-state Suzuki-Miyaura cross-coupling reactions between organoboron nucleophiles bearing a silyl group with long alkyl chains and insoluble polyaromatic halides. The silyl group on the nucleophile can act as a solubilizing group that enables product isolation via silica gel column chromatography and can be easily removed by the addition of fluoride anions to form the desired insoluble coupling products with sufficient purity. Furthermore, we demonstrate that after aromatic electrophilic bromination of the desilylated products, sequential solid-state cross-coupling of the obtained insoluble brominated substrates, followed by desilylation, afforded further π-extended functional molecules. Using this conceptually new protocol, we achieved the first uniform synthesis of the longest nonsubstituted linear insoluble 9-mer oligothiophene.

A metal-free photoactive nitrogen-doped carbon nanosolenoid with broad absorption in visible region for efficient photocatalysis

Riemann surfaces inspired chemists to design and synthesize such multidimensional curved carbon architectures. It has been predicted that carbon nanosolenoid materials with Riemann surfaces have unique structures and novel physical properties. Here we report the first synthesis of a nitrogen-doped carbon nanosolenoid (N-CNS) using bottom-up approach with a well-defined structure. N-CNS was obtained by a rational Suzuki polymerization, followed by oxidative cyclodehydrogenation. The successful synthesis of N-CNS was fully characterized by GPC, FTIR, solid-state 13C NMR and Raman techniques. The intrinsic single-strand molecular structures of N-CNS helices can be clearly resolved using low-dose integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM) technique. Possessing unique structural and physical properties, this long π-extended polymer N-CNS can provide new insight towards bottom-up syntheses of curved nanoribbons and potential applications as a metal-free photocatalyst for visible-light-driven H2 evolution and highly efficient photocatalyst for photoredox organic transformations.

Synthesis and Properties of Rubicene-Based Aromatic π-Conjugated Compounds as Five-Membered Ring Embedded Planar Nanographenes

Polycyclic aromatic hydrocarbons consisting of two or three rubicene substructures were designed as π-conjugated compounds embedding five-membered rings. The target compounds with t-butyl groups were synthesized by the Scholl reaction of precursors consisting of 9,10-diphenylanthracene units, even though a partially precyclized precursor was required for the synthesis of the trimer. These compounds were isolated as stable and dark blue solids. Single-crystal X-ray analysis and DFT calculations revealed the planar aromatic framework of these compounds. In the electronic spectra, the absorption and emission bands were considerably red-shifted compared with those of the reference rubicene compound. In particular, the emission band of the trimer extended to the near-IR region while retaining the emissive property. The narrowed HOMO-LUMO gap with the extension of the π-conjugation was confirmed by cyclic voltammetry and DFT calculations.

Circumpentacene with Open-Shell Singlet Diradical Character

Circumacenes (CAs) are a distinctive type of benzenoid polycyclic aromatic hydrocarbons where an acene unit is completely enclosed by a layer of outer fused benzene rings. Despite their unique structures, the synthesis of CAs is challenging, and until recently, the largest CA molecule synthesized was circumanthracene. In this study, we report the successful synthesis of an extended circumpentacene derivative 1, which represents the largest CA molecule synthesized to date. Its structure was confirmed by X-ray crystallographic analysis and its electronic properties were systematically investigated by both experiments and theoretical calculations. It shows a unique open-shell diradical character due to the existence of extended zigzag edges, with a moderate diradical character index (y0 =39.7 %) and a small singlet-triplet energy gap (ΔES-T =-4.47 kcal/mol). It exhibits a dominant local aromatic character with π-electrons delocalized in the individual aromatic sextet rings. It has a small HOMO-LUMO energy gap and displays amphoteric redox behavior. The electronic structures of its dication and dianion can be considered as doubly charged structures in which two coronene units are fused with a central aromatic benzene ring. This study provides a new route toward stable multizigzag-edged graphene-like molecules with open-shell di/polyradical character.

Chiral Superlattices Self-Assembled from Post-Modified Metal-Organic Polyhedra

Metal-organic polyhedra (MOPs) are inherently porous, discrete, and solvent-dispersive, and directing them into chiral superlattices through direct self-assembly remains a considerable challenge due to their nanoscale size and structural complexity. In this work, we illustrate a postmodification protocol to covalently conjugate a chiral cholesteryl pendant to MOPs. Postmodification retained the coordination cores and allowed for reaction-induced self-assembly in loosely packed nanosized columns without supramolecular chirality. Solvent-processed bottom-up self-assembly in aqueous media facilitated the well-defined packing into twisted superlattices with a 5 nm lattice parameter. Experimental and computational results validated the role of intercholesteryl forces in spinning the nanosized MOPs, which achieved the chirality transfer to supramolecular scale with chiral optics. This work establishes a novel protocol in rational design of MOP-based chiroptical materials for potential applications of enantioselective adsorption, catalysis, and separation.

Curved graphene nanoribbons derived from tetrahydropyrene-based polyphenylenes via one-pot K-region oxidation and Scholl cyclization

Precise synthesis of graphene nanoribbons (GNRs) is of great interest to chemists and materials scientists because of their unique opto-electronic properties and potential applications in carbon-based nanoelectronics and spintronics. In addition to the tunable edge structure and width, introducing curvature in GNRs is a powerful structural feature for their chemi-physical property modification. Here, we report an efficient solution synthesis of the first pyrene-based GNR (PyGNR) with curved geometry via one-pot K-region oxidation and Scholl cyclization of its corresponding well-soluble tetrahydropyrene-based polyphenylene precursor. The efficient A2B2-type Suzuki polymerization and subsequent Scholl reaction furnishes up to ∼35 nm long curved GNRs bearing cove- and armchair-edges. The construction of model compound 1, as a cutout of PyGNR, from a tetrahydropyrene-based oligophenylene precursor proves the concept and efficiency of the one-pot K-region oxidation and Scholl cyclization, which is clearly revealed by single crystal X-ray diffraction analysis. The structure and optical properties of PyGNR are investigated by Raman, FT-IR, solid-state NMR, STM and UV-Vis analysis with the support of DFT calculations. PyGNR exhibits a narrow optical bandgap of ∼1.4 eV derived from a Tauc plot, qualifying as a low-bandgap GNR. Moreover, THz spectroscopy on PyGNR estimates its macroscopic charge mobility μ as ∼3.6 cm2 V-1 s-1, outperforming several other curved GNRs reported via conventional Scholl reaction.

Facile Functionalization of Ambipolar, Nitrogen-Doped PAHs toward Highly Efficient TADF OLED Emitters

Despite promising optoelectronic features of N-doped polycyclic aromatic hydrocarbons (PAHs), their use as functional materials remains underdeveloped due to their limited post-functionalization. Facing this challenge, a novel design of N-doped PAHs with D-A-D electronic structure for thermally activated delayed fluorescence (TADF) emitters was performed. Implementing a set of auxiliary donors at the meta position of the protruding phenyl ring of quinoxaline triggers an increase in the charge-transfer property simultaneously decreasing the delayed fluorescence lifetime. This, in turn, contributes to a narrow (0.04-0.28 eV) singlet-triplet exchange energy split (ΔEST) and promotes a reverse intersystem crossing transition that is pivotal for an efficient TADF process. Boosting the electron-donating ability of our N-PAH scaffold leads to excellent photoluminescence quantum yield that was found in a solid-state matrix up to 96% (for phenoxazine-substituted derivatives, under air) with yellow or orange-red emission, depending on the specific compound. Organic light-emitting diodes (OLEDs) utilizing six, (D-A)-D, N-PAH emitters demonstrate a significant throughput with a maximum external quantum efficiency of 21.9% which is accompanied by remarkable luminance values which were found for all investigated devices in the range of 20,000-30,100 cd/m2 which is the highest reported to date for N-doped PAHs investigated in the OLED domain.

Interplay of structure and photophysics of individualized rod-shaped graphene quantum dots with up to 132 sp² carbon atoms

Nanographene materials are promising building blocks for the growing field of low-dimensional materials for optics, electronics and biophotonics applications. In particular, bottom-up synthesized 0D graphene quantum dots show great potential as single quantum emitters. To fully exploit their exciting properties, the graphene quantum dots must be of high purity; the key parameter for efficient purification being the solubility of the starting materials. Here, we report the synthesis of a family of highly soluble and easily processable rod-shaped graphene quantum dots with fluorescence quantum yields up to 94%. This is uncommon for a red emission. The high solubility is directly related to the design of the structure, allowing for an accurate description of the photophysical properties of the graphene quantum dots both in solution and at the single molecule level. These photophysical properties were fully predicted by quantum-chemical calculations.

Two-Step Synthesis of B2 N2 -Doped Polycyclic Aromatic Hydrocarbon Containing Pentagonal and Heptagonal Rings with Long-Lived Delayed Fluorescence

Pentagon-heptagon embedded polycyclic aromatic hydrocarbons (PAHs) have aroused increasing attention in recent years due to their unique physicochemical properties. Here, for the first time, this report demonstrates a facile method for the synthesis of a novel B2 N2 -doped PAH (BN-2) containing two pairs of pentagonal and heptagonal rings in only two steps. In the solid state of BN-2, two different conformations, including saddle-shaped and up-down geometries, are observed. Through a combined spectroscopic and calculation study, the excited-state dynamics of BN-2 is well-investigated in this current work. The resultant pentagon-heptagon embedded B2 N2 -doped BN-2 displays both prompt fluorescence and long-lived delayed fluorescence components at room temperature, with the triplet excited-state lifetime in the microsecond time region (τ = 19 µs). The triplet-triplet annihilation is assigned as the mechanism for the observed long-lived delayed fluorescence. Computational analyses attributed this observation to the small energy separation between the singlet and triplet excited states, facilitating the intersystem crossing (ISC) process which is further validated by the ultrafast spectroscopic measurements.

Electronic Structure Modulation of Nanographenes for Second Order Nonlinear Optical Molecular Materials

Nanographenes (NGs) have drawn extensive attention as promising candidates for next-generation optoelectronic and nonlinear optical (NLO) materials, owing to its unique optoelectronic properties and high thermal stability. However, the weak polarity or even non-polarity of NGs (resulting in weak even order NLO properties) and the high chemical reactivity of zigzag edged NGs hinder their further applications in nonlinear optics, thus stabilization (lowering the chemical reactivity) and polarizing the charge distribution in NGs are necessary for such applications of NGs. The fusion of heptagon and pentagon endows the azulene with the character of donor-acceptor, and the B=N unit is isoelectronic to C=C unit. The introduction of polar azulene and BN are idea to polarize and stabilize the electronic structure of NGs for NLO applications. In the present review, a survey on the functionalization and applications of NGs in nonlinear optics is conducted. The engineering of the electronic structure of NGs by topological defects, doping and edge modulation is summarized. Finally, a summary of challenges and perspectives for carbon-based NLO nanomaterials is presented.

Pyrrole-Fused Azacoronene Analog with Sulfur Embedded in the Outer Periphery

The synthesis of sulfur-embedded hexapyrrolohexaazacoronene (HPHAC) analog 2 and its corresponding desulfurized and rearranged compounds was achieved from tetrafluoroisothianaphthene. Structures of all the new π-skeletons were determined by X-ray crystallography. Comparison of the electronic spectrum of 2 with those of its derivatives revealed less involvement of the sulfur atom in π-conjugation. Similar to the reference HPHAC (1), compound 2 and its derivatives exhibited reversible oxidation behavior. The aromaticity of both neutral and dication states has been investigated through DFT calculations.

Construction of hexabenzocoronene-based chiral nanographenes

The past decade witnessed remarkable success in synthetic molecular nanographenes. Encouraged by the widespread application of chiral nanomaterials, the design, and construction of chiral nanographenes is a hot topic recently. As a classic nanographene unit, hexa-peri-hexabenzocoronene generally serves as the building block for nanographene synthesis. This review summarizes the representative examples of hexa-peri-hexabenzocoronene-based chiral nanographenes.

Helical Bilayer Nanographenes: Impact of the Helicene Length on the Structural, Electrochemical, Photophysical, and Chiroptical Properties

Helical bilayer nanographenes (HBNGs) are chiral π-extended aromatic compounds consisting of two π-π stacked hexabenzocoronenes (HBCs) joined by a helicene, thus resembling van der Waals layered 2D materials. Herein, we compare [9]HBNG, [10]HBNG, and [11]HBNG helical bilayers endowed with [9], [10], and [11]helicenes embedded in their structure, respectively. Interestingly, the helicene length defines the overlapping degree between the two HBCs (number of benzene rings involved in π-π interactions between the two layers), being 26, 14, and 10 benzene rings, respectively, according to the X-ray analysis. Unexpectedly, the electrochemical study shows that the lesser π-extended system [9]HBNG shows the strongest electron donor character, in part by interlayer exchange resonance, and more red-shifted values of emission. Furthermore, [9]HBNG also shows exceptional chiroptical properties with the biggest values of g_abs and g_lum (3.6 × 10^-2) when compared to [10]HBNG and [11]HBNG owing to the fine alignment in the configuration of [9]HBNG between its electric and magnetic dipole transition moments. Furthermore, spectroelectrochemical studies as well as the fluorescence spectroscopy support the aforementioned experimental findings, thus confirming the strong impact of the helicene length on the properties of this new family of bilayer nanographenes.

Nanographene-Based Heterojunctions for High-Performance Organic Phototransistor Memory Devices

Organic phototransistors can enable many important applications such as nonvolatile memory, artificial synapses, and photodetectors in next-generation optical communication and wearable electronics. However, it is still a challenge to achieve a big memory window (threshold voltage response ∆V_th ) for phototransistors. Here, a nanographene-based heterojunction phototransistor memory with large ∆V_th responses is reported. Exposure to low intensity light (25.7 µW cm^-2 ) for 1 s yields a memory window of 35 V, and the threshold voltage shift is found to be larger than 140 V under continuous light illumination. The device exhibits both good photosensitivity (3.6 × 10⁵ ) and memory properties including long retention time (>1.5 × 10⁵  s), large hysteresis (45.35 V), and high endurance for voltage-erasing and light-programming. These findings demonstrate the high application potential of nanographenes in the field of optoelectronics. In addition, the working principle of these hybrid nanographene-organic structured heterojunction phototransistor memory devices is described which provides new insight into the design of high-performance organic phototransistor devices.

Graphene-Like Conjugated Molecule as Hole-Selective Contact for Operationally Stable Inverted Perovskite Solar Cells and Modules

Further enhancing the operational lifetime of inverted-structure perovskite solar cells (PSCs) is crucial for their commercialization, and the design of hole-selective contacts at the illumination side plays a key role in operational stability. In this work, the self-anchoring benzo[rst]pentaphene (SA-BPP) is developed as a new type of hole-selective contact toward long-term operationally stable inverted PSCs. The SA-BPP molecule with a graphene-like conjugated structure shows a higher photostability and mobility than that of the frequently-used triphenylamine and carbazole-based hole-selective molecules. Besides, the anchoring groups of SA-BPP promote the formation of a large-scale uniform hole contact on ITO substrate and efficiently passivate the perovskite absorbers. Benefiting from these merits, the champion efficiencies of 22.03% for the small-sized cells and 17.08% for 5 × 5 cm² solar modules on an aperture area of 22.4 cm² are achieved based on this SA-BPP contact. Also, the SA-BPP-based device exhibits promising operational stability, with an efficiency retention of 87.4% after 2000 h continuous operation at the maximum power point under simulated 1-sun illumination, which indicates an estimated T₈₀ lifetime of 3175 h. This novel design concept of hole-selective contacts provides a promising strategy for further improving the PSC stability.

Lithium-Mediated Mechanochemical Cyclodehydrogenation

Cyclodehydrogenation is an essential synthetic method for the preparation of polycyclic aromatic hydrocarbons, polycyclic heteroaromatic compounds, and nanographenes. Among the many examples, anionic cyclodehydrogenation using potassium(0) has attracted synthetic chemists because of its irreplaceable reactivity and utility in obtaining rylene structures from binaphthyl derivatives. However, existing methods are difficult to use in terms of practicality, pyrophoricity, and lack of scalability and applicability. Herein, we report the development of a lithium(0)-mediated mechanochemical anionic cyclodehydrogenation reaction for the first time. This reaction could be easily performed using a conventional and easy-to-handle lithium(0) wire at room temperature, even under air, and the reaction of 1,1'-binaphthyl is complete within 30 min to afford perylene in 94% yield. Using this novel and user-friendly protocol, we investigated substrate scope, reaction mechanism, and gram-scale synthesis. As a result, remarkable applicability and practicality over previous methods, as well as limitations, were comprehensively studied by computational studies and nuclear magnetic resonance analysis. Furthermore, we demonstrated two-, three-, and five-fold cyclodehydrogenations for the synthesis of novel nanographenes. In particular, quinterrylene ([5]rylene or pentarylene), the longest nonsubstituted molecular rylene, was synthesized for the first time.

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

Electrochemical exfoliation starting with graphite powder as the raw material for graphene production shows superiority in cost effectiveness over the popular bulk graphite. However, the crucial conductive network inside the graphite powder electrode along with its formation and influence mechanisms remains blank. Here, an adjustable-pressure graphite powder electrode with a sandwich structure was designed for this. Appropriate encapsulation pressure is necessary and conducive to constructing a continuous and stable conductive network, but overloaded encapsulation pressure is detrimental to the exfoliation and graphene quality. With an initial encapsulation pressure (IEP) of 4 kPa, the graphite powders expand rapidly to a final stable expansion pressure of 49 kPa with a final graphene yield of 46.3%, where 84% of the graphene sheets are less than 4 layers with I_D/I_G values between 0.22 and 1.24. Increasing the IEP to 52 kPa, the expansion pressure increases to 73 kPa, but the graphene yield decreases to 39.3% with a worse graphene quality including higher layers and I_D/I_G values of 1.68-2.13. In addition, small-size graphite powders are not suitable for the electrochemical exfoliation. With the particle size decreasing from 50 to 325 mesh, the graphene yield decreases almost linearly from 46.3% to 5.5%. Conductive network and electrolyte migration synergize and constrain each other, codetermining the electrochemical exfoliation. Within an encapsulated structure, the electrochemical exfoliation of the graphite powder electrode proceeds from the outside to the inside. The insights revealed here will provide direction for further development of electrochemical exfoliation of graphite powder to produce graphene.

Synthesis of Bioctacene-Incorporated Nanographene with Near-Infrared Chiroptical Properties

We report the synthesis of a hexabenzoperihexacene (HBPH) with two incorporated octacene substructures, which was unambiguously characterized by single-crystal X-ray analysis. The theoretical isomerization barrier of the (P,P)-/(P,M)-forms was estimated to be 38.4 kcal mol^-1 , and resolution was achieved by chiral HPLC. Notably, the enantiomers exhibited opposite circular dichroism responses up to the near-infrared (NIR) region (830 nm) with a high g_abs value of 0.017 at 616 nm. Moreover, HBPH demonstrated NIR emission with a maximum at 798 nm and an absolute PLQY of 41 %. The excited-state photophysical properties of HBPH were investigated by ultrafast transient absorption spectroscopy, revealing an intriguing feature that was attributed to the rotational and/or conformational dynamics of HBPH after excitation. These results provide new insight into the design of chiral nanographene with NIR optical properties for potential chiroptical applications.

Electrochemical Syntheses of Polycyclic Aromatic Hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) have surfaced as increasingly viable components in optoelectronics and material sciences. The development of highly efficient and atom-economic tools to prepare PAHs under exceedingly mild conditions constitutes a long-term goal. Traditional syntheses of PAHs have largely relied on multistep approaches or the conventional Scholl reaction. However, Scholl reactions are largely inefficient with electron-deficient substrates, require stoichiometric chemical oxidants, and typically occur in the presence of strong acid. In sharp contrast, electrochemistry has gained considerable momentum during the past decade as an alternative for the facile and straightforward PAHs assembly, generally via electro-oxidative dehydrogenative annulation, releasing molecular hydrogen as the sole stoichiometric byproduct by the hydrogen evolution reaction. This review provides an overview on the recent and significant advances in the field of electrochemical syntheses of various PAHs until January 2023.

A Short Review on Nanostructured Carbon Containing Biopolymer Derived Composites for Tissue Engineering Applications

The development of new scaffolds and materials for tissue engineering is a wide and open realm of material science. Among solutions, the use of biopolymers represents a particularly interesting area of study due to their great chemical complexity that enables creation of specific molecular architectures. However, biopolymers do not exhibit the properties required for direct application in tissue repair-such as mechanical and electrical properties-but they do show very attractive chemical functionalities which are difficult to produce through in vitro synthesis. The combination of biopolymers with nanostructured carbon fillers could represent a robust solution to enhance composite properties, producing composites with new and unique features, particularly relating to electronic conduction. In this paper, we provide a review of the field of carbonaceous nanostructure-containing biopolymer composites, limiting our investigation to tissue-engineering applications, and providing a complete overview of the recent and most outstanding achievements.

Donor-Acceptor Fluorophores and Macrocycles Built Upon Wedge-Shaped π-Extended Phenanthroimidazoles

A class of wedge-shaped organic π-fluorophores featuring a 6,9-diphenyl-substituted phenanthroimidazole (PI) core was designed, synthesized, and characterized. Among them, a π-extended PI derivative containing two electron-withdrawing aldehyde groups was found to exhibit versatile solid-state packing properties as well as strong solvatofluorochromism in different organic solvents. Another PI derivative that was functionalized with two electron-donating 1,4-dithiafulvenyl (DTF) end groups showed versatile redox reactivities and quenched fluorescence. Treatment of this wedge-shaped bis(DTF)-PI compound with iodine resulted in oxidative coupling reactions, leading to the formation of intriguing macrocyclic products that carry redox-active tetrathiafulvalene vinylogue (TTFV) moieties in their structures. Mixing the bis(DTF)-PI derivative with fullerene (C₆₀ or C₇₀) in an organic solvent resulted in substantial fluorescence enhancement (turn-on). In this process, fullerene acted as a photosensitizer to generate singlet oxygen, which in turn induced oxidative C = C bond cleavages and converted nonfluorescent bis(DTF)-PI into highly fluorescent dialdehyde-substituted PI. Treatment of TTFV-PI macrocycles with a small amount of fullerene also led to a moderate degree of fluorescence enhancement, but this is not because of photosensitized oxidative cleavage reactions. Instead, competitive photoinduced electron transfer from TTFV to fullerene can be attributed to their fluorescence turn-on behavior.

Boundaries of the Hyperconjugation from π-Extended Six-Membered Phosphorus Heterocycles

In the context of materials science, six-membered phosphorus heterocycles are intriguing building blocks due to their tunable properties through phosphorus post-functionalization and their unique hyperconjugative effects arising from the phosphorus substituents that contribute to further tuning the optoelectronic properties of the system. Seeking for the discovery of improved materials, the latter features have triggered an astonishing evolution of molecular architectures based on phosphorus heterocycles. Theoretical calculations showed that the hyperconjugation causes a reduction in the S₀-S₁ gap, which strongly depends on the nature of both the P-substituent and the π-conjugated core, but where are the limits? Outlining the hyperconjugative effects of six-membered phosphorus heterocycles would allow scientists to know how to design next-generation organophosphorus systems with enhanced properties. Herein, we discovered that, in cationic six-membered phosphorus heterocycles, an increase in the hyperconjugation does not affect the S₀-S₁ gap anymore; i.e., quaternizing the phosphorus atoms leads to properties that go beyond those provoked by hyperconjugative effects. DFT calculations revealed that the latter is particularly marked in phosphaspiro derivatives. Our detailed investigations spotlight the potential of π-extended systems based on six-membered phosphorus spiroheterocycles for accessing properties beyond those achieved to date through hyperconjugative effects, thus laying the groundwork for new research possibilities toward improved organophosphorus systems.

Ring-Expanding Rearrangement of Benzo-Fused Tris-Cycloheptenylenes towards Nonplanar Polycyclic Aromatic Hydrocarbons

A strongly twisted benzo-fused tris-cycloheptenylene, containing three dibenzosuberenone units fused to a common benzene ring, was subjected to Ramirez olefination and subsequent palladium-catalyzed Suzuki-Miyaura cross-coupling with 4-substituted phenylboronic acids. The high steric demand within the overcrowded, benzene-rich benzo-fused tris-cycloheptenylenes enforced an unprecedented 1,2-rearrangement upon π-extension during the Suzuki coupling reaction. According to crystal structure analysis, the resulting negatively curved polycyclic aromatic hydrocarbons consist of two heptagons and one octagon surrounding a central benzene ring as a result of strain release. In the solid state, the materials exhibit a blue to blue-green fluorescence with increased quantum yields and a hypsochromic shift of the emission maxima compared to their respective solutions.

Synthesis, Structures, and Photophysical Properties of Zigzag BNBNB-Embedded Anthracene-Fused Fluoranthene

Three zigzag BNBNB-embedded anthracene-fused fluoranthenes are synthesized from 1,3,2-benzodiazaboroles through an indole-type N-directed C-H borylation reaction. Single-crystal X-ray diffraction analyses confirm the double bond character of all four alternating B-N bonds and reveal the five-center four-π-electron nature of the BNBNB group. Experimental spectra and density functional theory calculations indicate that borylation remarkably enhances the planarity, extends π-conjugation, and leads to a bathochromic shift in the absorption and emission bands, with remarkable fluorescence quantum yields in solution (92%).

Single Molecule Localization Microscopy for Studying Small Extracellular Vesicles

Small extracellular vesicles (sEVs) are 30-200 nm nanovesicles enriched with unique cargoes of nucleic acids, lipids, and proteins. sEVs are released by all cell types and have emerged as a critical mediator of cell-to-cell communication. Although many studies have dealt with the role of sEVs in health and disease, the exact mechanism of sEVs biogenesis and uptake remain unexplored due to the lack of suitable imaging technologies. For sEVs functional studies, imaging has long relied on conventional fluorescence microscopy that has only 200-300 nm resolution, thereby generating blurred images. To break this resolution limit, recent developments in super-resolution microscopy techniques, specifically single-molecule localization microscopy (SMLM), expanded the understanding of subcellular details at the few nanometer level. SMLM success relies on the use of appropriate fluorophores with excellent blinking properties. In this review, the basic principle of SMLM is highlighted and the state of the art of SMLM use in sEV biology is summarized. Next, how SMLM techniques implemented for cell imaging can be translated to sEV imaging is discussed by applying different labeling strategies to study sEV biogenesis and their biomolecular interaction with the distant recipient cells.

Distorted B/O-containing nanographenes with tunable optical properties

We report the synthesis of two B/O-containing nanographenes, which feature the fusion of three or six planar B/O-heterocycles onto one hexa-peri-hexabenzocoronene π-framework. Incorporation of the B/O-heterocycles not only leads to distorted geometries, but also modulates the electronic structures and results in gradually red-shifted absorptions and fluorescence.

Higher-Order Cycloaddition Reactions for the Construction of Polycyclic Aromatic and Polycyclic Heteroaromatic Compounds

Cycloadditions are an important class of reactions in materials science for the construction of polycyclic aromatic and polycyclic heteroaromatic compounds. Recently, cycloadditions have been expanded beyond the "classical" group of cycloadditions involving six π-electrons, and it is now possible to control cycloadditions for an extended number of π-electrons by applying organocatalysis. This novel field of cycloadditions-termed higher-order cycloadditions-allows new synthetic methodologies to construct polycyclic carbo- and heteroaromatic compounds in two or three dimensions. This concept presents higher-order cycloadditions as a method for accessing two- and three-dimensional azulenes and cyclazines, as well as three dimensional indenes, as polycyclic aromatic and polycyclic heteroaromatic compounds.

Tweaking the Optoelectronic Properties of S-Doped Polycyclic Aromatic Hydrocarbons by Chemical Oxidation

Peri-thiaxanthenothiaxanthene, an S-doped analog of peri-xanthenoxanthene, is used as a polycyclic aromatic hydrocarbon (PAH) scaffold to tune the molecular semiconductor properties by editing the oxidation state of the S-atoms. Chemical oxidation of peri-thiaxanthenothiaxanthene with H₂ O₂ led to the relevant sulfoxide and sulfone congeners, whereas electrooxidation gave access to sulfonium-type derivatives forming crystalline mixed valence (MV) complexes. These complexes depicted peculiar molecular and solid-state arrangements with face-to-face π-π stacking organization. Photophysical studies showed a widening of the optical bandgap upon progressive oxidation of the S-atoms, with the bis-sulfone derivative displaying the largest value (E₀₀ =2.99 eV). While peri-thiaxanthenothiaxanthene showed reversible oxidation properties, the sulfoxide and sulfone derivatives mainly showed reductive events, corroborating their n-type properties. Electric measurements of single crystals of the MV complexes exhibited a semiconducting behavior with a remarkably high conductivity at room temperature (10^-1 -10^-2  S cm^-1 and 10^-2 -10^-3  S cm^-1 for the O and S derivatives, respectively), one of the highest reported so far. Finally, the electroluminescence properties of the complexes were tested in light-emitting electrochemical cells (LECs), obtaining the first S-doped mid-emitting PAH-based LECs.

Recent advances in n-type and ambipolar organic semiconductors and their multi-functional applications

Organic semiconductors have received broad attention and research interest due to their unique integration of semiconducting properties with structural tunability, intrinsic flexibiltiy and low cost. In order to meet the requirements of organic electronic devices and their integrated circuits, p-type, n-type and ambipolar organic semiconductors are all necessary. However, due to the limitation in both material synthesis and device fabrication, the development of n-type and ambipolar materials is quite behind that of p-type materials. Recent development in synthetic methods of organic semiconductors greatly enriches the range of n-type and ambipolar materials. Moreover, the newly developed materials with multiple functions also put forward multi-functional device applications, including some emerging research areas. In this review, we give a timely summary on these impressive advances in n-type and ambipolar organic semiconductors with a special focus on their synthesis methods and advanced materials with enhanced properties of charge carrier mobility, integration of high mobility and strong emission and thermoelectric properties. Finally, multi-functional device applications are further demonstrated as an example of these developed n-type and ambipolar materials.

Helical Synthetic Nanographenes with Atomic Precision

ConspectusUnderstanding and harnessing the properties of nanoscale molecular entities are considered as new frontiers in basic chemistry. In this regard, synthetic nanographene with atomic precision has attracted much attention recently. For instance, taking advantage of the marvelous bonding capability of carbon, flat, curved, ribbon-type, or cone-shaped nanographenes have been prepared in highly controllable and elegant manner, allowing one to explore fascinating molecular architectures with intriguing optical, electrochemical, and magnetic characteristics. This stands in stark contrast to other carbon-rich nanomaterials, such as graphite oxides or carbon quantum dots, which preclude thorough investigations because of complicate structural defects. Undoubtedly, synthetic nanographene contributes strongly to modern aromatic chemistry and represents a vibrant field that may deliver transforming functional materials crucial for optoelectronics, nanotechnologies, and biomedicine.Nonetheless, in many cases, synthesis and characterization of nanographene compounds are highly demanding. Low solubility, high molecular strain, undesired selectivity, as well as incomplete or excessive C-C bond formation are common impediments, that require formidable efforts to control the molecular geometry, to modulate the edge structure, to achieve accurate doping, or to push the upper size boundary. These endeavors are indispensable for establishing structure-property relationships, and lay down foundation for exploring synthetic nanographenes at a high level of sophistications.In this Account, we summarize our contributions to this field by presenting a series of helical synthetic nanographenes, such as hexapole [7]helicene (H7H), nitrogen-doped H7H, hexapole [9]helicene (H9H), superhelicene, and supertwistacene. This kind of giant synthetic nanographene reaches the size domain of carbon quantum dots, albeit has precise atomic structure. It provides a unique platform to study aromatic chemistry and chirality at the nanoscale. We discuss synthetic methods and point out, in particular, the strengths and pitfalls of Scholl oxidation, which are expected to be valuable for making synthetic nanographenes in general. In addition, we illustrate their exciting electrochemical and photophysical performance, which include, but are not limited to, reversible multielectron redox chemistry, record high panchromatic absorption, impressive photothermal behavior, and extremely strong Cotton effect. These unusual characteristics are convincingly traced back to their three-dimensional conjugated architectures, highlighting the critical roles of π-electron delocalization, heteroatom-doping, substitution, and molecular symmetry in determining nanographenes' properties and functions. Lastly, we put forward our understanding on the challenges and opportunities that lies ahead and hope this Account will inspire ever more ambitious achievements from this attractive area of research.

Synthesis, Photoswitching Behavior and Nonlinear Optical Properties of Substituted Tribenzo[a,d,g]coronene

A family of tribenzocoronene derivatives bearing various substituents (3) were constructed through the Diels-Alder reaction, followed by the Scholl oxidation, where the molecular structure of 3b was determined via single crystal X-ray diffraction analysis. The effect of substitution on the optical and electrochemical property was systematically investigated, with the assistance of theoretical calculations. Moreover, the thin films of the resulting molecules 3b and 3e complexed with fullerene produced strong photocurrent response upon irradiation of white light. In addition, 3b and 3e exhibit a positive nonlinear optical response resulting from the two-photon absorption and excited state absorption processes.

Furan-Extended Helical Rylenes with Fjord Edge Topology and Tunable Optoelectronic Properties

Lateral furan-expansion of polycyclic aromatics, which enables multiple O-doping and peripheral edge evolution of rylenes, is developed for the first time. Tetrafuranylperylene TPF-4CN and octafuranylquaterrylene OFQ-8CN were prepared as model compounds bearing unique fjord edge topology and helical conformations. Compared to TPF-4CN, the higher congener OFQ-8CN displays a largely red-shifted (≈333 nm) and intensified absorption band (λ_max =829 nm) as well as a narrowed electrochemical band gap (≈1.08 eV) due to its pronounced π-delocalization and emerging of open-shell diradicaloid upon the increase of fjord edge length. Moreover, strong circular dichroism signals in a broad range until 900 nm are observed for open-shell chiral OFQ-8CN, owing to the excellent conformational stability of its central bis(tetraoxa[5]helicene) fragments. Our studies provide insights into the relationships between edge topologies and (chir)optoelectronic properties for this novel type of O-doped PAHs.

Anthracene-Fused Oligo-BODIPYs: A New Class of π-Extended NIR-Absorbing Materials

Large π-conjugated systems are key in the area of molecular materials. Herein, we prepare via Au^I -catalyzed cyclization a series of fully π-conjugated anthracene-fused oligo-BODIPYs. Their structural and optoelectronic properties were studied by several techniques, ranging from X-ray, UV/Vis, and cyclic voltammetry to transient absorption spectroscopy. As a complement, their electronic structures were explored by means of Density Functional Theory (DFT) calculations. Depending on the size and shape of the π-conjugated skeleton, unique features-such as face-to-face supramolecular organization, NIR absorption and fluorescence as well as strong electron accepting character-were noted. All in all, the aforementioned features render them valuable for technological applications.

Azaarenes: 13 Rings in a Row by Cyclopentannulation

Cyclopentannulation was explored as a strategy to access large, stable azaarenes. Buchwald-Hartwig coupling of previously reported di- and tetrabrominated cyclopentannulated N,N'-dihydrotetraazapentacenes furnished stable azaarenes with up to 13 six-membered rings in a row and a length of 3.1 nm. Their optoelectronic and semi-conducting properties as well as their aromaticity were investigated.

(BO)2 -Doped Tetrathia[7]helicene: A Configurationally Stable Blue Emitter

Helicenes combine two central themes in chemistry: extended π-conjugation and chirality. Hetero-atom doping preserves both characteristics and allows modulation of the electronic structure of a helicene. Herein, we report the (BO)2 -doped tetrathia[7]helicene 1, which was prepared from 2-methoxy-3,3'-bithiophene in four steps. 1 is formally derived by substituting two (Mes)B-O moieties in place of (H)C=C(H) fragments in two benzene rings of the parent tetrathia[7]helicene. X-ray crystallography revealed a dihedral angle of 50.26(9)° between the two terminal thiophene rings. The (P)-/(M)-1 enantiomers were separated by chiral HPLC and are configurationally stable at room temperature. The experimentally determined enantiomerization barrier of 27.4±0.1 kcal mol-1 is lower than that of tetrathia[7]helicene (39.4±0.1 kcal mol-1 ). The circular dichroism spectra of (P)- and (M)-1 show a perfect mirror-image relationship. 1 is a blue emitter (λem =411 nm) with a photoluminescence quantum efficiency of ΦPL =6 % (cf. tetrathia[7]helicene: λem ≈405 nm, ΦPL =5 %).

Synthesis, Post-Functionalization and Properties of Diphosphapentaarenes

Linearly-fused polyarenes are an important class of compounds with high relevance in materials science. While modifying the shape and size represents a common means to fine-tune their properties, the precise placement of heteroatoms is a strategy that is receiving an increasing deal of attention to overcome the intrinsic limitations of all-carbon structures. Thus, linearly-fused diphosphaarenes recently emerged as a novel family of molecules with striking optoelectronic properties and outstanding stability. However, the properties of diphosphaarenes are far from being benchmarked. Herein, we report the synthesis, phosphorus post-functionalization and properties of new diphosphapentaarene derivatives. We describe their synthetic limitations and unveil their potential for optoelectronic applications.

Synthesis of Highly Luminescent Chiral Nanographene

Chiral nanographenes with both high fluorescence quantum yields (Φ_F ) and large dissymmetry factors (g_lum ) are essential to the development of circularly polarized luminescence (CPL) materials. However, most studies have been focused on the improvement of g_lum , whereas how to design highly emissive chiral nanographenes is still unclear. In this work, we propose a new design strategy to achieve chiral nanographenes with high Φ_F by helical π-extension of strongly luminescent chromophores while maintaining the frontier molecular orbital (FMO) distribution pattern. Chiral nanographene with perylene as the core and two dibenzo[6]helicene fragments as the wings has been synthesized, which exhibits a record high Φ_F of 93 % among the reported chiral nanographenes and excellent CPL brightness (B_CPL ) of 32 M^-1  cm^-1 .