Electrospun Asymmetric Membranes as Promising Wound Dressings: A Review

Despite all the efforts that have been done up to now, the currently available wound dressings are still unable to fully re-establish all the structural and functional properties of the native skin. To overcome this situation, researchers from the tissue engineering area have been developing new wound dressings (hydrogels, films, sponges, membranes) aiming to mimic all the features of native skin. Among them, asymmetric membranes emerged as a promising solution since they reproduce both epidermal and dermal skin layers. Wet or dry/wet phase inversion, scCO2-assisted phase inversion, and electrospinning have been the most used techniques to produce such a type of membranes. Among them, the electrospinning technique, due to its versatility, allows the development of multifunctional dressings, using natural and/or synthetic polymers, which resemble the extracellular matrix of native skin as well as address the specific requirements of each skin layer. Moreover, various therapeutic or antimicrobial agents have been loaded within nanofibers to further improve the wound healing performance of these membranes. This review article provides an overview of the application of asymmetric electrospun membranes as wound dressings displaying antibacterial activity and as delivery systems of biomolecules that act as wound healing enhancers.

Electrospun fibers based on botanical, seaweed, microbial, and animal sourced biomacromolecules and their multidimensional applications

This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.

Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis

Skin is the body's first barrier against external pathogens that maintains the homeostasis of the body. Any serious damage to the skin could have an impact on human health and quality of life. Tissue engineering aims to improve the quality of damaged tissue regeneration. One of the most effective treatments for skin tissue regeneration is to improve angiogenesis during the healing period. Over the last decade, there has been an impressive growth of new potential applications for nanobiomaterials in tissue engineering. Various approaches have been developed to improve the rate and quality of the healing process using angiogenic nanomaterials. In this review, we focused on molecular mechanisms and key factors in angiogenesis, the role of nanobiomaterials in angiogenesis, and scaffold-based tissue engineering approaches for accelerated wound healing based on improved angiogenesis.

Functionalization of eggshell membranes with CuO-ZnO based p-n junctions for visible light induced antibacterial activity against Escherichia coli

Biopolymers provide versatile platforms for designing naturally-derived wound care dressings through eco-friendly pathways. Eggshell membrane (ESM), a widely available, biocompatible biopolymer based structure features a unique 3D porous interwoven fibrous protein network. The ESM was functionalized with inorganic compounds (Ag, ZnO, CuO used either separately or combined) using a straightforward deposition technique namely radio frequency magnetron sputtering. The functionalized ESMs were characterized from morphological, structural, compositional, surface chemistry, optical, cytotoxicity and antibacterial point of view. It was emphasized that functionalization with a combination of metal oxides and exposure to visible light results in a highly efficient antibacterial activity against Escherichia coli when compared to the activity of individual metal oxide components. It is assumed that this is possible due to the fact that an axial p-n junction is created by joining the two metal oxides. This structure separates into components the charge carrier pairs promoted by visible light irradiation that further can influence the generation of reactive oxygen species which ultimately are responsible for the bactericide effect. This study proves that, by employing inexpensive and environmentally friendly materials (ESM and metal oxides) and fabrication techniques (radio frequency magnetron sputtering), affordable antibacterial materials can be developed for potential applications in chronic wound healing device area.

Microneedle arrays for the treatment of chronic wounds

INTRODUCTION

Chronic wounds are seen frequently in diabetic and bedbound patients. Such skin injuries, which do not heal in a timely fashion, can lead to life-threatening conditions. In an effort to resolve the burdens of chronic wounds, numerous investigations have explored the efficacy of various therapeutics on wound healing. Therapeutics can be topically delivered to cutaneous wounds to reduce the complications associated with systemic drug delivery because the compromised skin barrier is not expected to negatively affect drug distribution. However, researchers have recently demonstrated that the complex environment of chronic wounds could lower the localized availability of the applied therapeutics. Microneedle arrays (MNAs) can be exploited to enhance delivery efficiency and consequently improved healing.

AREAS COVERED

In this review, we briefly describe the pathophysiology of chronic wounds and current treatment strategies. We further introduce methods and materials commonly used for the fabrication of MNAs. Subsequently, the studies demonstrating the benefits of MNAs in wound care are highlighted.

EXPERT OPINION

Microneedles have great potential to treat the complicated pathophysiology of chronic wounds. Challenges that will need to be addressed include development of a robust chronic wound model and MNAs that combine complex functionality with simplicity of use.

Cryogenically printed flexible chitosan/bioglass scaffolds with stable and hierarchical porous structures for wound healing

Wound healing is a dynamic and well-orchestrated process that can be promoted by creating an optimal environment with wound dressing. An ideal wound dressing material should possess a suitable matrix, structure and bioactive components, functioning synergistically to accelerate wound healing. Wound dressings that allow reproducibility and customizability are highly desirable in clinical practice. In this study, using chitosan (CS) as the matrix and bioglass (BG) as the biological component, a spatially designed dressing scaffold was fabricated from a home-made cryogenic printing system. The micro- and macro-structures of the scaffold were highly controllable and reproducible. The printed scaffold exhibited interconnected and hierarchical pore structures, as well as good flexibility and water absorption capacity, and these properties were not affected by the content of BG. Nevertheless, when the content of BGs exceeded 20% that of CS, the tension strength and elongation rate reduced, but in vitro antibacterial, cell proliferation and migration performance were enhanced. In vivo examinations revealed that the composite scaffold significantly promoted wound healing process, with the group having 30% bioglass showing better wound closure, neovascularization and collagen deposition than other groups. These results indicate that the 3D printed CS/BG composite scaffold is a promising dressing material that accelerates wound healing.

Sacrificial Alginate-Assisted Microfluidic Engineering of Cell-Supportive Protein Microfibers for Hydrogel-Based Cell Encapsulation

Although many types of technologies for hydrogel-based cell cultivation have recently been developed, strategies to integrate cell-adhesive micrometer-sized supports with bulk-scale hydrogel platforms have not been fully established. Here, we present a highly unique approach to produce cell-adhesive, protein-based microfibers assisted by the sacrificial template of alginate; we applied these fibers as microengineered scaffolds for hydrogel-based cell encapsulation. Two types of microfluidic devices were designed and fabricated: a single-layered device for producing relatively thick (Φ of 10-60 μm) alginate-protein composite fibers with a uniform cross-sectional morphology and a four-layered device for preparing thinner (Φ of ∼4 μm) ones through the formation of patterned microfibers with eight distinct alginate-protein composite regions. Following chemical cross-linking of protein molecules and the subsequent removal of the sacrificial alginate from the double-network matrices, microfibers composed only of cross-linked proteins were obtained. We used gelatin, albumin, and hemoglobin as the protein material, and the gelatin-based cell-adhesive fibers were further encapsulated in hydrogels together with the mammalian cells. We clarified that the thinner fibers were especially effective in promoting cell proliferation, and the shape of the constructs was maintained even after removing the hydrogel matrices. The presented approach offers cells with biocompatible solid supports that enhance cell adhesion and proliferation, paving the way for the next generation of techniques for tissue engineering and multicellular organoid formation.

Stereocomplexed electrospun nanofibers containing poly (lactic acid) modified quaternized chitosan for wound healing

Skin damage, especially the extensive full-thickness wound, is seriously affecting people's daily life and health. Meanwhile, wound healing is always challenged by bacterial infection. In this study, for the purpose of developing a disinfectant wound dressing, we designed a novel multi-functional nanofiber mats via electrospinning combining chitosan derivations and stereocomplex crystallite (SC). The SC membrane of poly (lactic acid)/chitosan derivatives were prepared via warming at 80 °C for 1 h. The thermal and mechanical properties of the heated mats were strengthened owing to the formation of SC, which restricted the lactide chains mobility. In vivo wound healing test revealed that the SC mats have better wound repair ability than the control group with a wound healing rate of 100 % within 15 days. In a word, the biomass-based mats with enhanced thermal and mechanical properties, antibacterial effect and antioxidant activity, providing a potential multi-functional platform for designing of disinfectant wound dressings.

Electrospinning of natural polymers for the production of nanofibres for wound healing applications

Wound healing is a highly regulated process composed of four overlapping phases: (1) coagulation/haemostasis, (2) inflammation, (3) proliferation and (4) remodelling. Comorbidities such as advanced age, diabetes and obesity can impair natural tissue repair, rendering the wound in a pathological state of inflammation. This results in significant discomfort for patients and considerable financial costs for healthcare systems. Due to the complex nature of wound healing, current treatments are ineffective at dealing with delayed healing. With flexible properties that can be tailored, nanomaterials have emerged as alternative therapeutics for many biomedical applications. A nanofibrous network can be made via electrospinning polymers using a high electric field to create a responsive meshwork that can be used as a medical dressing. A nanofibrous device has properties that can overcome the limitations of traditional dressings, such as: (1) adaptability to wound contour; (2) controlled drug delivery of therapeutics; (3) gaseous exchange; (4) exudate absorption and (5) surface functionalisation to further enhance the biological activity of the dressing. This review details emerging trends in nanotechnology to specifically target wound healing applications. Particular focus is given to the most common natural polymers that could address many unmet healthcare needs.

Dopamine-Modified Hyaluronic Acid Hydrogel Adhesives with Fast-Forming and High Tissue Adhesion

Commercial or clinical tissue adhesives are currently limited due to their weak bonding strength on wet biological tissue surface, low biological compatibility, and slow adhesion formation. Although catechol-modified hyaluronic acid (HA) adhesives are developed, they suffer from limitations: insufficient adhesiveness and overfast degradation, attributed to low substitution of catechol groups. In this study, we demonstrate a simple and efficient strategy to prepare mussel-inspired HA hydrogel adhesives with improved degree of substitution of catechol groups. Because of the significantly increased grafting ratio of catechol groups, dopamine-conjugated dialdehyde-HA (DAHA) hydrogels exhibit excellent tissue adhesion performance (i.e., adhesive strength of 90.0 ± 6.7 kPa), which are significantly higher than those found in dopamine-conjugated HA hydrogels (∼10 kPa), photo-cross-linkable HA hydrogels (∼13 kPa), or commercially available fibrin glues (2-40 kPa). At the same time, their maximum adhesion energy is 384.6 ± 26.0 J m^-2, which also is 40-400-fold, 2-40-fold, and ∼8-fold higher than those of the mussel-based adhesive, cyanoacrylate, and fibrin glues, respectively. Moreover, the hydrogels can gel rapidly within 60 s and have a tunable degradation suitable for tissue regeneration. Together with their cytocompatibility and good cell adhesion, they are promising materials as new biological adhesives.

Electrospinning of Essential Oils

The extensive and sometimes unregulated use of synthetic chemicals, such as drugs, preservatives, and pesticides, is posing big threats to global health, the environment, and food security. This has stimulated the research of new strategies to deal with bacterial infections in animals and humans and to eradicate pests. Plant extracts, particularly essential oils, have recently emerged as valid alternatives to synthetic drugs, due to their properties which include antibacterial, antifungal, anti-inflammatory, antioxidant, and insecticidal activity. This review discusses the current research on the use of electrospinning to encapsulate essential oils into polymeric nanofibres and achieve controlled release of these bioactive compounds, while protecting them from degradation. The works here analysed demonstrate that the electrospinning process is an effective strategy to preserve the properties of essential oils and create bioactive membranes for biomedical, pharmaceutical, and food packaging applications.

Spun Biotextiles in Tissue Engineering and Biomolecules Delivery Systems

Nowadays, tissue engineering is described as an interdisciplinary field that combines engineering principles and life sciences to generate implantable devices to repair, restore and/or improve functions of injured tissues. Such devices are designed to induce the interaction and integration of tissue and cells within the implantable matrices and are manufactured to meet the appropriate physical, mechanical and physiological local demands. Biodegradable constructs based on polymeric fibers are desirable for tissue engineering due to their large surface area, interconnectivity, open pore structure, and controlled mechanical strength. Additionally, biodegradable constructs are also very sought-out for biomolecule delivery systems with a target-directed action. In the present review, we explore the properties of some of the most common biodegradable polymers used in tissue engineering applications and biomolecule delivery systems and highlight their most important uses.

Soya protein isolate-polyethylene oxide electrospun nanofiber membrane with bone marrow-derived mesenchymal stem cell for enhanced bone regeneration

In this study, we prepared an electrospun nanofiber membrane from soya protein isolate (SPI) and polyethylene oxide (PEO) loaded with rat bone marrow-derived mesenchymal stem cells (rBMSC), as a cell-scaffold approach to enhance bone regeneration. Different ratios of SPI:PEO (7:0, 7:1, 7:3, 7:5, and 0:7) was investigated to obtain uniform nanofibers, and crosslinked with EDC/NHS to stabilize the membranes. SPI/PEO membrane (7:3) was found to create more uniform and stable nanofibers at a flow rate of 9 µL/min, spun in a cylindrical collector rotating at 350 r/min, 23 kV DC voltage, and needle tip to collector distance of 13 cm. The loaded rBMSC were pre-differentiated to ensure commitment towards osteoblastic lineage. The SPI/PEO electrospun nanofiber membranes were successful in allowing for cell attachment and growth of the rBMSC and was further investigated in vivo using a rat skull defect model. New bone formation was observed for the optimized SPI/PEO electrospun nanofiber membrane (7:3) with and without rBMSC, but with faster new bone formation for SPI/PEO electrospun nanofiber membrane loaded with rBMSC as compared to SPI/PEO electrospun nanofiber membrane only and control (defect only).

A Novel Bilayer Wound Dressing Composed of a Dense Polyurethane/Propolis Membrane and a Biodegradable Polycaprolactone/Gelatin Nanofibrous Scaffold

One-layer wound dressings cannot meet all the clinical needs due to their individual characteristics and shortcomings. Therefore, bilayer wound dressings which are composed of two layers with different properties have gained lots of attention. In the present study, polycaprolactone/gelatin (PCL/Gel) scaffold was electrospun on a dense membrane composed of polyurethane and ethanolic extract of propolis (PU/EEP). The PU/EEP membrane was used as the top layer to protect the wound area from external contamination and dehydration, while the PCL/Gel scaffold was used as the sublayer to facilitate cells' adhesion and proliferation. The bilayer wound dressing was investigated regarding its microstructure, mechanical properties, surface wettability, anti-bacterial activity, biodegradability, biocompatibility, and its efficacy in the animal wound model and histopathological analyzes. Scanning electron micrographs exhibited uniform morphology and bead-free structure of the PCL/Gel scaffold with average fibers' diameter of 237.3 ± 65.1 nm. Significant anti-bacterial activity was observed against Staphylococcal aureus (5.4 ± 0.3 mm), Escherichia coli (1.9 ± 0.4 mm) and Staphylococcus epidermidis (1.0 ± 0.2 mm) according to inhibition zone test. The bilayer wound dressing exhibited high hydrophilicity (51.1 ± 4.9°), biodegradability, and biocompatibility. The bilayer wound dressing could significantly accelerate the wound closure and collagen deposition in the Wistar rats' skin wound model. Taking together, the PU/EEP-PCL/Gel bilayer wound dressing can be a potential candidate for biomedical applications due to remarkable mechanical properties, biocompatibility, antibacterial features, and wound healing activities.

Bacteria-triggered release of a potent biocide from core-shell polyhydroxyalkanoate (PHA)-based nanofibers for wound dressing applications

Bacterial infections are a serious issue in wound healing. Extensive use of biocides in wound dressings have raised concerns of biocide resistance and unnecessary harm to normal skin cells. In this paper, we report a new approach to realize bacteria-triggered release of a biocide to the sites of bacterial infections from core-shell polyhydroxyalkanoate (PHA)-based nanofibers prepared by coaxial electrospinning. The hydrophobic PHA-based shell can prevent the biocide from undesirable payload release in physiological environments without pathogens. However, in the presence of pathogens, the PHA-based shell is degraded by the pathogens, and the encapsulated biocide is released. The released biocide subsequently can exert targeted antimicrobial effects on the bacteria. Using Pseudomonas aeruginosa as a model bacterium and dodecyltrimethylammonium chloride as a model biocide, we demonstrated that the core-shell PHA-based nanofibers effectively released encapsulated dodecyltrimethylammonium chloride in the presence of Pseudomonas aeruginosa, resulting in targeted inactivation of Pseudomonas aeruginosa cells.HighlightsUnique core-shell nanofibers were successfully fabricated from PHAs generated by bacteria.An on-demand release of biocide was achieved from a PHA-based core-shell nanofibours membrane.The membrane's mechanical properties closely match those of the human skin.

Photocrosslinking maleilated hyaluronate/methacrylated poly (vinyl alcohol) nanofibrous mats for hydrogel wound dressings

Although electrospinning of nanofibrous scaffolds benefit to wound healing have been developed at a fast pace, achieving nanofibrous scaffolds with high absorptivity by green electrospinning and crosslinking techniques is still a great challenge. Here, we developed a maleilated hyaluronate/methacrylated poly (vinyl alcohol) (MHA) (MaPVA) composite nanofibers by electrospinning from pure water solvent and followed by photopolymerization to form crosslinking nanofibers network. Electrospinnability of MHA/MaPVA blend systems were investigated and the results shows that the morphology and diameter of the nanofibers were mainly affected by MHA/MaPVA weight ratios by changing viscosity and conductivity of the blend solutions. The crystalline microstructure of the electrospun fibers was not well developed due to intermolecular hydrogen bonding interaction between the molecules of MHA and MaPVA. The photocrosslinking MHA/MaPVA nanofibrous mats can swell to form fibrous hydrogels with high water absorption, meanwhile it is cytocompatible and capable of promoting the cell attachment, which render it great potential for wound dressings.

Current progress in application of polymeric nanofibers to tissue engineering

Tissue engineering uses a combination of cell biology, chemistry, and biomaterials to fabricate three dimensional (3D) tissues that mimic the architecture of extracellular matrix (ECM) comprising diverse interwoven nanofibrous structure. Among several methods for producing nanofibrous scaffolds, electrospinning has gained intense interest because it can make nanofibers with a porous structure and high specific surface area. The processing and solution parameters of electrospinning can considerably affect the assembly and structural morphology of the fabricated nanofibers. Electrospun nanofibers can be made from natural or synthetic polymers and blending them is a straightforward way to tune the functionality of the nanofibers. Furthermore, the electrospun nanofibers can be functionalized with various surface modification strategies. In this review, we highlight the latest achievements in fabricating electrospun nanofibers and describe various ways to modify the surface and structure of scaffolds to promote their functionality. We also summarize the application of advanced polymeric nanofibrous scaffolds in the regeneration of human bone, cartilage, vascular tissues, and tendons/ligaments.

Advances in portable electrospinning devices for in situ delivery of personalized wound care

Electrospinning and electrospun fibrous assemblies have attracted interest in a variety of biomedical fields including woundcare, tissue engineering and drug delivery, due to the large surface-area-to-volume ratio and high porosity of nanofibrous webs. Normally, wound dressings are manufactured well before the point of care, and then packaged and distributed for use at a later stage. More recently, in situ electrospinning of fibers directly onto wound sites has been proposed as a route to personalized wound dressing manufacture, tailored to the needs of individual patients. Practically, in situ deposition of nanofibers on to a wound could be envisaged using a portable or hand-held electrospinning device that is safe and easy to operate. This review focuses on recent advances in portable electrospinning technology and potential applications in woundcare and regenerative medicine. The main research challenges and future trends are also considered.

Near-Infrared, Light-Triggered, On-Demand Anti-inflammatories and Antibiotics Release by Graphene Oxide/Elecrospun PCL Patch for Wound Healing

Very recently, significant attention has been focused on the adsorption and cell adhesion properties of graphene oxide (GO), because it is expected to allow high drug loading and controlled drug release, as well as the promotion of cell adhesion and proliferation. This is particularly interesting in the promotion of wound healing, where antibiotics and anti-inflammatories should be locally released for a prolonged time to allow fibroblast proliferation. Here, we designed an implantable patch consisting of poly(caprolactone) electrospun covered with GO, henceforth named GO–PCL, endowed with high ibuprofen (5.85 mg cm−2), ketoprofen (0.86 mg cm−2), and vancomycin (0.95 mg cm−2) loading, used as anti-inflammatory and antibiotic models respectively, and capable of responding to near infrared (NIR)-light stimuli in order to promptly release the payload on-demand beyond three days. Furthermore, we demonstrated the GO is able to promote fibroblast adhesion, a key characteristic to potentially provide wound healing in vivo.

Drug therapies and delivery mechanisms to treat perturbed skin wound healing

Acute wound healing is an orderly process of four overlapping events: haemostasis, inflammation, proliferation and remodelling. A drug delivery system with a temporal control of release could promote each of these events sequentially. However, acute wound healing normally proceeds very well in healthy individuals and there is little need to promote it. In the elderly and diabetics however, healing is often slow and wounds can become chronic and we need to promote their healing. Targeting the events of acute wound healing would not be appropriate for a chronic wound, which have stalled in the proinflammatory phase. They also have many additional problems such as poor circulation, low oxygen, high levels of leukocytes, high reactive oxygen species, high levels of proteolytic enzymes, high levels of proinflammatory cytokines, bacterial infection and high pH. The future challenge will be to tackle each of these negative factors to create a wound environment conducive to healing.

Natural composite dressings based on collagen, gelatin and plant bioactive compounds for wound healing: A review

Skin wound dressings are commonly used to stimulate and enhance skin tissue repair. Even if wounds seem easy to repair for clinicians and to replicate in an in vitro set-up for scientists, chronic wounds remain currently an open challenge in skin tissue engineering for patients with complementary diseases. The seemingly simple process of skin healing hides a heterogenous sequence of events, specific timing, and high level of organization and coordination among the involved cell types. Taken together, all these aspects make wound healing a unique process, but we are not yet able to completely repair the chronic wounds or to reproduce them in vitro with high fidelity. This review highlights the main characteristics and properties of a natural polymer, which is widely used as biomaterial, namely collagen and of its denatured form, gelatin. Available wound dressings based on collagen/gelatin and proposed variants loaded with bioactive compounds derived from plants are presented. Applications of these composite biomaterials are discussed with emphasis on skin wound healing. A perspective on current issues is given in the light of future research. The emerging technologies support the development of innovative dressings based exclusively on natural constituents, either polymeric or bioactive compounds.

Therapeutic compression materials and wound dressings for chronic venous insufficiency: A comprehensive review

Chronic venous insufficiency (CVI) is a common disorder worldwide. Related pathophysiological mechanisms reportedly involve venous pooling and reduced venous return, leading to heaviness, aching, itchiness, tiredness, varicosities, pigmentation, and even lower limb ulceration. Approaches adopted to manage CVI at various stages of clinical-etiology-anatomy-pathophysiology include compression therapy, pharmacological treatment, ultrasound treatment, surgery, electrical or wireless microcurrent stimulation, and pulsed electromagnetic treatment. Among these, polymer-based therapeutic compression materials and wound dressings play increasingly key roles in treating all stages of CVI because of their unique physical, mechanical, chemical, and biological functions. However, the characteristics, working mechanisms, and effectiveness of these CVI treatment materials are not comprehensively understood. The present systematic review examines the structures, properties, types, and applications of various polymer-based compression materials and wound dressings used in prophylaxis and treatment of CVI. Existing problems, limitations, and future trends of CVI treatment materials are also discussed. This review could contribute to the design and application of new functional polymer materials and dressings to enhance the efficiency of CVI treatments, thereby facilitating patients' self-care ability and long-term health improvement.

Tuning Porosity and Functionality of Electrospun Rubber Nanofiber Mats by Photo-Crosslinking

The present work proposes a versatile and efficient method to fabricate rubber nanofiber membranes with a controlled morphology and tailored functionality, based on the application of photoinduced thiol-ene cross-linking reactions to electrospun mats. Besides preventing the polymer cold flow and freezing the structure obtained by electrospinning, the photocuring step finely controls the morphology of the nanofiber mats, in terms of the fiber diameter up to the nanometer range and of the membrane porosity. Nanofiber membranes are also made chemically resistant, while retaining their flexibility. Finally, the proposed approach allows imparting specific functionalities to the rubber nanofibers: the type and concentration of the functional groups can be precisely tuned by changing process parameters (i.e., thiol/ene stoichiometric ratio and irradiation dose). Active chemical groups that remain available on the surface of the nanofibers can be used for further material modifications, as here proven by two target reactions. This key result is also demonstrated with electrospun membranes embedded into a microfluidic chip, opening the way to advanced functional flexible devices.

Naturally-derived electrospun wound dressings for target delivery of bio-active agents

Electrospun nanofibers are known as the advanced means for wound dressing. They have represented remarkable potency to encapsulate and deliver biomolecules promoting the wound healing process. Compared to synthetic polymers, naturally derived polymers (NDP) are more qualified candidates for fabrication of biomedical electrospun scaffolds. Not only nanofibers of NDP illustrate higher biocompatibility and biodegradability rates, but also they mimic the native extracellular matrix more closely, which leads to the wound closure acceleration by enhancing tissue regeneration. Aside, incorporation of bioactive molecules and therapeutic agents into the nanofibers can generate innovative bioactive wound dressings with significantly improved healing potentials. This paper starts with a brief discussion on the steps and factors influencing the wound healing process. Then, the recent applications of electrospun nanofibers as wound dressing with healing accelerating properties are reviewed. Further, the various healing agents and alternative strategies for modification and functionalization of bioactive naturally-derived electrospun nanofibers are discussed.

Chitosan based-asymmetric membranes for wound healing: A review

The wound healing process involves highly complex and dynamic events that allow the re-establishment of skin's structural integrity. To further improve or to overcome the drawbacks associated with this process, researchers have been focused on the development of new therapeutics. Among them, asymmetric membranes are currently one of the most promising approaches to be used in wound healing due to its structural similarities with the epidermal and dermal layers of the native skin. The outer layer of asymmetric membranes provides a barrier that protects the wound from external damages (e.g. microorganisms and chemical agents), whereas the interior porous layer acts as template for supporting cell adhesion, migration and proliferation. Among the different materials used to produce these distinct layers, the chitosan arises as one of the preeminent materials due to its inherent biocompatibility, antibacterial, hemostatic, and healing properties. Therefore, in this review, it is provided an overview of the different chitosan-based asymmetric membranes developed for wound dressing applications. Further, the chitosan modifications to enhance its bioactivity as well as the asymmetric membranes general properties and production techniques are also described.

Sputtering of Electrospun Polymer-Based Nanofibers for Biomedical Applications: A Perspective

Electrospinning has gained wide attention recently in biomedical applications. Electrospun biocompatible scaffolds are well-known for biomedical applications such as drug delivery, wound dressing, and tissue engineering applications. In this review, the synthesis of polymer-based fiber composites using an electrospinning technique is discussed. Formerly, metal particles were then deposited on the surface of electrospun fibers using sputtering technology. Key nanometals for biomedical applications including silver and copper nanoparticles are discussed throughout this review. The formulated scaffolds were found to be suitable candidates for biomedical uses such as antibacterial coatings, surface modification for improving biocompatibility, and tissue engineering. This review briefly mentions the characteristics of the nanostructures while focusing on how nanostructures hold potential for a wide range of biomedical applications.

Electrospinning in water and in situ crosslinking of hyaluronic acid / cyclodextrin nanofibers: Towards wound dressing with controlled drug release

Hyaluronic acid (HA) is widely investigated due to its high potential for wound dressing applications. The fabrication of biomimetic HA-based scaffolds by electrospinning is thus extensively studied. However, HA is often dissolved in toxic organic solvents to allow the efficient production of electrospun nanofibers. Indeed, although HA is soluble in water, its ionic nature leading to long-range electrostatic interactions and the presence of counter ions induce a dramatic increase of the viscosity of aqueous HA solutions without insuring enough chain entanglements necessary for a stable and efficient electrospinning. In this study, biocompatible insoluble HA-based nanofibers were fabricated by electrospinning in pure water. To this end, poly(vinyl alcohol) (PVA) was added as a carrier polymer and it was found that the addition of hydroxypropyl-βcyclodextrin (HPβCD) stabilized the process of electrospinning and led to the efficient formation of uniform nanofibrous scaffolds. An in situ crosslinking process of the scaffolds is also proposed, insuring a whole fabrication process without any toxicity. Furthermore, the beneficial presence of HPβCD in the HA-based scaffolds paves the way for wound dressing applications with controlled drug encapsulation-release properties. As a proof of concept, naproxen (NAP), a non-steroidal anti-inflammatory drug was chosen as a model drug. NAP was impregnated into the scaffolds either in aqueous solution or under supercritical CO₂. The resulting functional scaffolds showed a regular drug release profile along several days without losing the fibrous structure. This study proposes a simple approach to form stable HA-based nanofibrous scaffolds embedding HPβCD using water as the only solvent, enabling the development of safe functional wound dressings.

Influence of Nanofiber Orientation on Morphological and Mechanical Properties of Electrospun Chitosan Mats

This work explored the use of chitosan (Cs) and poly(ethylene oxide) (PEO) blends for the fabrication of electrospun fiber-orientated meshes potentially suitable for engineering fiber-reinforced soft tissues such as tendons, ligaments, or meniscus. To mimic the fiber alignment present in native tissue, the CS/PEO blend solution was electrospun using a traditional static plate, a rotating drum collector, and a rotating disk collector to get, respectively, random, parallel, circumferential-oriented fibers. The effects of the different orientations (parallel or circumferential) and high-speed rotating collector influenced fiber morphology, leading to a reduction in nanofiber diameters and an improvement in mechanical properties.

Bifunctional scaffolds for the photothermal therapy of breast tumor cells and adipose tissue regeneration

Breast cancer is a major public health issue, whose morbidity and mortality are increasing across the world. It is still a challenge to completely ablate breast tumor cells and reconstruct tumor-initiated breast defects after surgical resection. Porous scaffolds with hyperthermal and tissue regeneration functions are a desirable option to achieve these effects. In this study, bifunctional composite porous scaffolds of gold nanorods (AuNRs) and gelatin with well controlled pore structures were prepared by introducing AuNRs into the porous matrices of gelatin and using ice particulates as a porogen material. The AuNRs-gelatin composite scaffolds exhibited a high photothermal conversion effect, whose photothermal temperature could be modulated by the amount of incorporated AuNRs, NIR laser power intensity and irradiation time. The AuNRs-gelatin composite scaffolds exhibited an excellent photothermal ablation capacity toward breast tumor cells in vitro and in vivo. Furthermore, the AuNRs-gelatin porous scaffolds supported cell adhesion and promoted the proliferation and adipogenic differentiation of human bone-marrow derived mesenchymal stem cells (hMSCs). Consequently, the AuNRs-gelatin scaffolds could not only provide photothermal therapy for breast tumors but also promote the adipogenic differentiation of stem cells for adipose tissue regeneration.

Electrospinning of in situ crosslinked recombinant human collagen peptide/chitosan nanofibers for wound healing

Electrospun collagen nanofibers are effective for wound healing; however, many problems, such as the tedious preparation process, weak strength and poor structure integration, limit further applications. In this study, recombinant human collagen (RHC) peptides and a simple one-step crosslinking strategy were used to prepare RHC/chitosan nanofibers. With the nonpathogenic, water-soluble RHC and a mild electrospinning solvent, in situ crosslinked nanofibers (S-CN) not only simplified the preparation procedure but also maintained a more integrated morphology. Compared with the immersed crosslinked nanofibers (I-CN), S-CN showed better performance in moisture retention, degradation and mechanical strength tests. In vitro cell proliferation, morphology and RT-PCR studies confirmed that fibroblasts presented better activities on nanofibers crosslinked in situ. Importantly, after treating with the nanofibers, rapid epidermidalization and angiogenesis were observed in an SD rat scalding model. All these data suggest that electrospun RHC/chitosan nanofibers crosslinked in situ are an ideal candidate that can be used for wound healing applications.

Cellular Response to Surface Morphology: Electrospinning and Computational Modeling

Surface properties of biomaterials, such as chemistry and morphology, have a major role in modulating cellular behavior and therefore impact on the development of high-performance devices for biomedical applications, such as scaffolds for tissue engineering and systems for drug delivery. Opportunely-designed micro- and nanostructures provides a unique way of controlling cell-biomaterial interaction. This mini-review discusses the current research on the use of electrospinning (extrusion of polymer nanofibers upon the application of an electric field) as effective technique to fabricate patterns of micro- and nano-scale resolution, and the corresponding biological studies. The focus is on the effect of morphological cues, including fiber alignment, porosity and surface roughness of electrospun mats, to direct cell migration and to influence cell adhesion, differentiation and proliferation. Experimental studies are combined with computational models that predict and correlate the surface composition of a biomaterial with the response of cells in contact with it. The use of predictive models can facilitate the rational design of new bio-interfaces.

In Situ Electrospinning Iodine-Based Fibrous Meshes for Antibacterial Wound Dressing

For effective application of electrospinning and electrospun fibrous meshes in wound dressing, we have in situ electrospun poly(vinyl pyrrolidone)/iodine (PVP/I), PVP/poly(vinyl pyrrolidone)-iodine (PVPI) complex, and poly(vinyl butyral) (PVB)/PVPI solutions into fibrous membranes by a handheld electrospinning apparatus. The morphologies of the electrospun fibers were examined by SEM, and the hydrophobicity, gas permeability, and antibacterial properties of the as-spun meshes were also investigated. The flexibility and feasibility of in situ electrospinning PVP/I, PVP/PVPI, and PVB/PVPI membranes, as well as the excellent gas permeabilities and antibacterial properties of the as-spun meshes, promised their potential applications in wound healing.

Borrowing From Nature: Biopolymers and Biocomposites as Smart Wound Care Materials

Wound repair is a complex and tightly regulated physiological process, involving the activation of various cell types throughout each subsequent step (homeostasis, inflammation, proliferation, and tissue remodeling). Any impairment within the correct sequence of the healing events could lead to chronic wounds, with potential effects on the patience quality of life, and consequent fallouts on the wound care management. Nature itself can be of inspiration for the development of fully biodegradable materials, presenting enhanced bioactive potentialities, and sustainability. Naturally-derived biopolymers are nowadays considered smart materials. They provide a versatile and tunable platform to design the appropriate extracellular matrix able to support tissue regeneration, while contrasting the onset of adverse events. In the past decades, fabrication of bioactive materials based on natural polymers, either of protein derivation or polysaccharide-based, has been extensively exploited to tackle wound-healing related problematics. However, in today's World the exclusive use of such materials is becoming an urgent challenge, to meet the demand of environmentally sustainable technologies to support our future needs, including applications in the fields of healthcare and wound management. In the following, we will briefly introduce the main physico-chemical and biological properties of some protein-based biopolymers and some naturally-derived polysaccharides. Moreover, we will present some of the recent technological processing and green fabrication approaches of novel composite materials based on these biopolymers, with particular attention on their applications in the skin tissue repair field. Lastly, we will highlight promising future perspectives for the development of a new generation of environmentally-friendly, naturally-derived, smart wound dressings.

Hydrogen Sulfide-Releasing Fibrous Membranes: Potential Patches for Stimulating Human Stem Cells Proliferation and Viability under Oxidative Stress

The design of biomaterial platforms able to release bioactive molecules is mandatory in tissue repair and regenerative medicine. In this context, electrospinning is a user-friendly, versatile and low-cost technique, able to process different kinds of materials in micro- and nano-fibers with a large surface area-to-volume ratio for an optimal release of gaseous signaling molecules. Recently, the antioxidant and anti-inflammatory properties of the endogenous gasotramsmitter hydrogen sulfide (H₂S), as well as its ability to stimulate relevant biochemical processes on the growth of mesenchymal stem cells (MSC), have been investigated. Therefore, in this work, new poly(lactic) acid fibrous membranes (PFM), doped and functionalized with H₂S slow-releasing donors extracted from garlic, were synthetized. These innovative H₂S-releasing mats were characterized for their morphological, thermal, mechanical, and biological properties. Their antimicrobial activity and effects on the in vitro human cardiac MSC growth, either in the presence or in the absence of oxidative stress, were here assessed. On the basis of the results here presented, these new H₂S-releasing PFM could represent promising and low-cost scaffolds or patches for biomedical applications in tissue repair.

Effect of Antibacterial Plant Extracts on the Morphology of Electrospun Poly(Lactic Acid) Fibres

Essential oils (EOs) of clary sage and black pepper induce changes in the morphology of poly(lactic acid) (PLA) electrospun fibres. The chemical composition of the oils is analysed by gas chromatography-mass spectrometry and Fourier-transform infrared spectroscopy; while the evaporation rate of the EOs and their main chemical components is characterised by Thermogravimetric Analysis. The addition of EOs generate thermodynamic instabilities during the electrospinning process, leading to the formation of fibres with either wrinkled (for clary sage oil) or nano-textured surfaces (for black pepper oil). The morphology of the PLA-EOs fibres is investigated by Scanning Electron Microscopy. Together with a well-defined structure, the fibres produced also possess antibacterial activity, as demonstrated by viability loss tests conducted on E. coli and S. epidermidis. Bacteria inactivation efficiency of 76 and 100% is reported for the composite PLA/essential oils electrospun mats. The composite mats produced are promising in the biomedical field, where nanotopography offers physical cues to regulate cell behaviour, and the delivery of therapeutic compounds (essential oils) limits microbial growth.

Electrospun polymeric nanofibres as wound dressings: A review

Skin wounds have significant morbidity and mortality rates associated. This is explained by the limited effectiveness of the currently available treatments, which in some cases do not allow the reestablishment of the structure and functions of the damaged skin, leading to wound infection and dehydration. These drawbacks may have an impact on the healing process and ultimately prompt patients' death. For this reason, researchers are currently developing new wound dressings that enhance skin regeneration. Among them, electrospun polymeric nanofibres have been regarded as promising tools for improving skin regeneration due to their structural similarity with the extracellular matrix of normal skin, capacity to promote cell growth and proliferation and bactericidal activity as well as suitability to deliver bioactive molecules to the wound site. In this review, an overview of the recent studies concerning the production and evaluation of electrospun polymeric nanofibrous membranes for skin regenerative purposes is provided. Moreover, the current challenges and future perspectives of electrospun nanofibrous membranes suitable for this biomedical application are highlighted.