Metal-organic framework (MOF) materials as polymerization catalysts: a review and recent advances

Facile synthesis and superior properties of a nitrogen-rich energetic Zn-MOF with a 2D azide-bridged bilayer structure

Exploring the facile synthesis of Pb-free energetic metal-organic frameworks (EMOFs) with both high nitrogen content and high thermostability is a significant but challenging task in the field of MOF-based green energetic materials. Herein, a new EMOF, [Zn₂(atz)₃(N₃)]_n (atz = 5-amino-1H-tetrazole), has been synthesized by simply using a commercial ligand (atz) under mild conditions. A probable mechanism for the formation of azide groups in the product has been proposed, in which the fraction of C-N and N-N bonds in atz is the key. The X-ray single crystal structure analysis reveals the EMOF's unique graphene-like and azide-group-bridged 2D bilayer structure with gourd-type micropores. More impressively, the EMOF shows a high nitrogen content of 59.33% and superior thermostability of up to 362 °C, both among the best of existing EMOFs. In addition, detonation property calculations and sensitivity tests have been carried out, which demonstrate its high-energy and low-sensitivity features. Moreover, [Zn₂(atz)₃(N₃)]_n shows the ability to accelerate the thermal decomposition of ammonium perchlorate (AP) and hexanitrohexaazaisowurtzitane (CL-20), making it a potential combustion promoter for green and insensitive propellants.

Metal-organic Framework ZIF-67 Functionalized MXene for Enhancing the Fire Safety of Thermoplastic Polyurethanes

In this work, a novel functionalization strategy for ZIF-67-modified layered MXene was proposed, aiming at improving the fire safety of thermoplastic polyurethanes (TPU). The ZIF-67@MXene was verified by microscopic morphology, elemental composition, functional group species and crystal structure, and then the successfully prepared ZIF-67@MXene was introduced into the TPU material. When ZIF-67@MXene content was only 0.5 wt%, the peak heat release rate, total heat release rate, peak smoke release rate, total smoke release rate, and CO yield of the TPU/ZIF-67@MXene composites were reduced by 26%, 9%, 50%, and 22%, respectively, compared with the pure TPU. The thermogravimetric tests showed that the residual char of TPU/ZIF-67@MXene composites was the most in all samples. In short, the high-quality carbon layer of TPU/ZIF-67@MXene composites acts as a physical barrier to the transfer of heat and toxic gases, greatly improving the flame retardant properties of the TPU polymer.

Structure-Property Relationship for Different Mesoporous Silica Nanoparticles and its Drug Delivery Applications: A Review

Mesoporous silica nanoparticles (MSNs) are widely used as a promising candidate for drug delivery applications due to silica’s favorable biocompatibility, thermal stability, and chemical properties. Silica’s unique mesoporous structure allows for effective drug loading and controlled release at the target site. In this review, we have discussed various methods of MSNs’ mechanism, properties, and its drug delivery applications. As a result, we came to the conclusion that more in vivo biocompatibility studies, toxicity studies, bio-distribution studies and clinical research are essential for MSN advancement.

Design of an antenna effect Eu(III)-based metal-organic framework for highly selective sensing of Fe3

Highly selective sensing of Fe³⁺ is very important due to its great effect on biological systems. A novel ligand [1,1':4',1'':4'',1''':4''',1''''-quinquephenyl]-2,2'',2'''',5''-tetracarboxylic acid (H₄qptca) was designed and successfully obtained for the first time via three steps in high total yields according to the absorption spectrum of Fe³⁺. The europium(III)-based metal-organic framework derived from H₄qptca, {[Eu(qptca)_1/2(H₂qptca)_1/2(H₂O)₂]·DMF}_n (referred to as SLX-1), was then synthesized and used as a water-stable and highly selective luminescent sensor for Fe³⁺ in aqueous solution with a comparable detection limit using Ln-MOF probes (6.45 μM) through the antenna effect of SLX-1. Furthermore, the luminescence quenching mechanism was also proposed as a competitive absorption mechanism.

Metal-hydrogen-pi-bonded organic frameworks

We report the synthesis and characterization of a new series of permanently porous, three-dimensional metal-organic frameworks (MOFs), M-HAF-2 (M = Fe, Ga, or In), constructed from tetratopic, hydroxamate-based, chelating linkers. The structure of M-HAF-2 was determined by three-dimensional electron diffraction (3D ED), revealing a unique interpenetrated hcb-a net topology. This unusual topology is enabled by the presence of free hydroxamic acid groups, which lead to the formation of a diverse network of cooperative interactions comprising metal-hydroxamate coordination interactions at single metal nodes, staggered π-π interactions between linkers, and H-bonding interactions between metal-coordinated and free hydroxamate groups. Such extensive, multimodal interconnectivity is reminiscent of the complex, noncovalent interaction networks of proteins and endows M-HAF-2 frameworks with high thermal and chemical stability and allows them to readily undergo postsynthetic metal ion exchange (PSE) between trivalent metal ions. We demonstrate that M-HAF-2 can serve as versatile porous materials for ionic separations, aided by one-dimensional channels lined by continuously π-stacked aromatic groups and H-bonding hydroxamate functionalities. As an addition to the small group of hydroxamic acid-based MOFs, M-HAF-2 represents a structural merger between MOFs and hydrogen-bonded organic frameworks (HOFs) and illustrates the utility of non-canonical metal-coordinating functionalities in the discovery of new bonding and topological patterns in reticular materials.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Architecture engineering of nanostructured catalyst via layer-by-layer adornment of multiple nanocatalysts on silica nanorod arrays for hydrogenation of nitroarenes

Direct consideration for both, the catalytically active species and the host materials provides highly efficient strategies for the architecture design of nanostructured catalysts. The conventional wet chemical methods have limitations in achieving such unique layer-by-layer design possessing one body framework with many catalyst parts. Herein, an innovative physical method is presented that allows the well-regulated architecture design for an array of functional nanocatalysts as exemplified by layer-by-layer adornment of Pd nanoparticles (NPs) on the highly arrayed silica nanorods. This spatially confined catalyst exhibits excellent efficiency for the hydrogenation of nitroarenes and widely deployed Suzuki cross-coupling reactions; their facile separation from the reaction mixtures is easily accomplished due to the monolithic structure. The generality of this method for the introduction of other metal source has also been demonstrated with Au NPs. This pioneering effort highlights the feasibility of physically controlled architecture design of nanostructured catalysts which may stimulate further studies in the general domain of the heterogeneous catalytic transformations.

Study on the synthesis and host–guest luminescence properties of a novel Cd(ii)-picolinate coordination polymer

A coordination polymer with guest-molecule-based luminescence is flexible in preparation and shows greater controllability.

Ethylene polymerization with a crystallographically well-defined metal–organic framework supported catalyst

Crystallographic characterization of a heterogeneous ethylene polymerization catalyst elucidates a chromium–carbon bond after alkyl aluminum activation and provides mechanistic insights.

Post-synthetically modified metal–porphyrin framework GaTCPP for carbon dioxide adsorption and energy storage in Li–S batteries

Metal–porphyrin framework GaTCPP was used for carbon dioxide adsorption and as a host for preparation of a Li–S battery cathode material.

Recyclable Zr/Hf-Containing Acid-Base Bifunctional Catalysts for Hydrogen Transfer Upgrading of Biofuranics: A Review

The massive burning of a large amount of fossil energy has caused a lot of serious environmental issues (e.g., air pollution and climate change), urging people to efficiently explore and valorize sustainable alternatives. Biomass is being deemed as the only organic carbon-containing renewable resource for the production of net-zero carbon emission fuels and fine chemicals. Regarding this, the selective transformation of high-oxygen biomass feedstocks by catalytic transfer hydrogenation (CTH) is a very promising strategy to realize the carbon cycle. Among them, the important Meerwein-Ponndorf-Verley (MPV) reaction is believed to be capable of replacing the traditional hydrogenation strategy which generally requires high-pressure H2 and precious metals, aiming to upgrade biomass into downstream biochemical products and fuels. Employing bifunctional heterogeneous catalysts with both acidic and basic sites is needed to catalyze the MPV reaction, which is the key point for domino/cascade reaction in one pot that can eliminate the relevant complicated separation/purification step. Zirconium (Zr) and hafnium (Hf), belonging to transition metals, rich in reserves, can demonstrate similar catalytic efficiency for MPV reaction as that of precious metals. This review introduced the application of recyclable heterogeneous non-noble Zr/Hf-containing catalysts with acid-base bifunctionality for CTH reaction using the safe liquid hydrogen donor. The corresponding catalysts were classified into different types including Zr/Hf-containing metal oxides, supported materials, zeolites, metal-organic frameworks, metal-organic hybrids, and their respective pros and cons were compared and discussed comprehensively. Emphasis was placed on evaluating the bifunctionality of catalytic material and the key role of the active site corresponding to the structure of the catalyst in the MPV reaction. Finally, a concise summary and prospect were also provided centering on the development and suggestion of Zr/Hf-containing acid-base bifunctional catalysts for CTH.

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3

A luminescent coordination polymer with the overall formula {[Zn(tr2btd)(bpdc)]∙DMF}n (where tr2btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr2btd)(bpdc)]∙DMF}n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al3+ solution. Fluorescence titration experiments were carried out and the detection limit for Al3+ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr2btd)(bpdc)]∙DMF}n is a promising probe for sensitive fluorescent Al3+ detection.

Supramolecular Strategies for the Recycling of Homogeneous Catalysts

Supramolecular approaches are increasingly used in the development of homogeneous catalysts and they also provide interesting new tools for the recycling of metal-based catalysts. Various non-covalent interactions have been utilized for the immobilization homogeneous catalysts on soluble and insoluble support. By non-covalent anchoring the supported catalysts obtained can be recovered via (nano-) filtration or such catalytic materials can be used in continuous flow reactors. Specific benefits from the reversibility of catalyst immobilization by non-covalent interactions include the possibility to re-functionalize the support material and the use as "boomerang" type catalyst systems in which the catalyst is captured after a homogeneous reaction. In addition, new reactor design with implemented recycling strategies becomes possible, such as a reverse-flow adsorption reactor (RFA) that combines a homogeneous reactor with selective catalyst adsorption/desorpion. Next to these non-covalent immobilization strategies, supramolecular chemistry can also be used to generate the support, for example by generation of self-assembled gels with catalytic function. Although the stability is a challenging issue, some self-assembled gel materials have been successfully utilized as reusable heterogeneous catalysts. In addition, catalytically active coordination cages, which are frequently used to achieve specific activity or selectivity, can be bound to support by ionic interactions or can be prepared in structured solid materials. These new heterogenized cage materials also have been used successfully as recyclable catalysts.

The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability

A novel dissolution-crystallization-attachment strategy was developed to synthesize urchin-shaped superstructure metal-organic frameworks (MOFs) with self-assembled one-dimensional nanorods. The superstructure MOFs not only inherited the high activity of nanosized MOFs but also displayed the high stability of microsized MOFs.

2D Porphyrinic Metal-Organic Framework Nanosheets as Multidimensional Photocatalysts for Functional Materials

Ultrathin porphyrinic 2D MOFs, ZnTCPP nanosheets (TCPP: 5,10,15,20-(tetra-4-carboxyphenyl) porphyrin) were employed as heterogeneous photocatalysts to activate PET-RAFT polymerization under various wavelengths ranging from violet to orange light. High polymerization rates, oxygen tolerance, and precise temporal control were achieved. The polymers showed narrow molecular weight distributions and good chain-end fidelity. The 2D ZnTCPP nanosheets were applied as photocatalysts in stereolithographic 3D printing in an open-air environment under blue light to yield well-defined 3D printed objects. Apart from providing an efficient catalytic system, 2D ZnTCPP nanosheets reinforced the mechanical properties of the 3D printed materials. The presence of ZnTCPP embedded in the materials conferred effective antimicrobial activity under visible light by production of singlet oxygen, affording 98 % and 93 % anti-bacterial efficiency against Gram-positive and Gram-negative bacteria, respectively.

Construction of Stable Helical Metal-Organic Frameworks with a Conformationally Rigid "Concave Ligand"

A helical metal-organic framework was prepared by using a conformationally rigid tetratopic benzoic acid ligand with binding units pointing toward each other (concave ligand). To avoid the obvious intramolecular interactions between binding units, matching spacing groups were applied to introduce atropic repulsion, thereby allowing the formation of extended frameworks for the first time. With this new ligand design, a helical-shaped MOF with significantly improved air and moisture stability was successfully prepared, thus providing a new strategy for ligand design toward porous material constructions.

Stabilization of an enzyme cytochrome c in a metal-organic framework against denaturing organic solvents

Enzymes are promising catalysts with high selectivity and activity under mild reaction conditions. However, their practical application has largely been hindered by their high cost and poor stability. Metal-organic frameworks (MOFs) as host materials show potential in protecting proteins against denaturing conditions, but a systematic study investigating the stabilizing mechanism is still lacking. In this study, we stabilized enzyme cytochrome c (cyt c) by encapsulating it in a hierarchical mesoporous zirconium-based MOF, NU-1000 against denaturing organic solvents. Cyt c@NU-1000 showed a significantly enhanced activity compared to the native enzyme, and the composite retained this enhanced activity after treatment with five denaturing organic solvents. Moreover, the composite was recyclable without activity loss for at least three cycles. Our cyt c@NU-1000 model system demonstrates that enzyme@MOF composites prepared via post-synthetic encapsulation offer a promising route to overcome the challenges of enzyme stability and recyclability that impede the widespread adoption of biocatalysis.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn₂(MTA)]·4H₂O·3DMF} _n (UPJS-13) and {[Cd₂(MTA)]·5H₂O·4DMF} _n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H₄MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m² g^-1 for UPJS-13 (FD) and 1057 m² g^-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO₂ and 4.84 wt% CH₄ for UPJS-13 (FD) and 24.56 wt% CO₂ and 6.38 wt% CH₄ for UPJS-14 (FD) at 20 bar and 30 °C.

Copper(II) 2,2-Bis(Hydroxymethyl)Propionate Coordination Compounds with Hexamethylenetetramine: From Mononuclear Complex to One-Dimensional Coordination Polymer

Three new copper coordination compounds derived from 2,2-bis(hydroxymethyl)propionic acid (dmpa) and hexamethylenetetramine (hmta) were obtained and their crystal structures were determined. The stoichiometry of the reagents applied in the syntheses reflects the metal to ligand molar ratio in the formed solid products. Due to the multiple coordination modes of the used ligands, wide structural diversity was achieved among synthesized compounds, i.e., mononuclear [Cu(dmp)₂(hmta)₂(H₂O)] (1), dinuclear [Cu₂(dmp)₄(hmta)₂] (2), and 1D coordination polymer [Cu₂(dmp)₄(hmta)]_n (3). Their supramolecular structures are governed by O—H•••O and O—H•••N hydrogen bonds. The compounds were characterized in terms of absorption (UV-Vis and IR) and thermal properties. The relationships between structural features and properties were discussed in detail. Owing to discrepancies in the coordination mode of a dmp ligand, bidentate chelating in 1, and bidentate bridging in 2 and 3, there is a noticeable change in the position of the bands corresponding to the stretching vibrations of the carboxylate group in the IR spectra. The differences in the structures of the compounds are also reflected in the nature and position of the UV-Vis absorption maxima, which are located at lower wavelengths for 1.

Recyclable and Magnetically Functionalized Metal-Organic Framework Catalyst: IL/Fe3O4@HKUST-1 for the Cycloaddition Reaction of CO2 with Epoxides

A recyclable and magnetic nanocomposite catalyst (IL/Fe₃O₄@HKUST-1) was synthesized via grafting ionic liquid (IL) [AEMIm]BF₄ into magnetically functionalized metal-organic framework Fe₃O₄@HKUST-1 in a water-ethanol media. The properties of IL/Fe₃O₄@HKUST-1 were fully characterized by powder X-ray diffraction, electron microscopy, Fourier-transform infrared spectroscopy, nitrogen adsorption-desorption, density-functional theory, and a magnetic property measurement system. IL/Fe₃O₄@HKUST-1 showed high activity in the solvent-free cycloaddition of CO₂ with epoxides under mild conditions. Furthermore, the catalyst can be easily separated from the reaction mixture, and the recycled catalyst maintained high performance for several cycles. The synergistic effect of the Lewis acid and base sites in IL/Fe₃O₄@HKUST-1 contributes to its greater reactivity than individual IL or HKUST-1.

Highly Emissive Metal-Organic Frameworks for Sensitive and Selective Detection of Nitrofuran and Quinolone Antibiotics

The overuse of antibiotics makes its detection very significant for human health. New facile methods and high-performance sensory materials will be urgently needed for detection of antibiotics. Unfortunately, there are few reports on fluorescence enhancement of antibiotics detection. Herein, based on the modulability of the coordination mode, we proposed two MOFs with different coordination modes based on different metal ions: Zn-MOF (1) and Cd-MOF (2). The fluorescence of 1 and 2 can be efficiently and selectively quenched by nitrofuran antibiotics (nitrofurazone, NFZ and furazolidone, FZD) and chloramphenicol (CAP), respectively. Particularly, the matched energy levels between 2 and enrofloxacin (ENR) enables 2 with turn-on sensing for ENR. Moreover, apart from the sensitivity and selectivity, 1 and 2 also have strong recyclable ability, fast response time and anti-interference ability, which make them great potential sensory materials to detect antibiotics.

Thiosemicarbazone modified zeolitic imidazolate framework (TSC-ZIF) for mercury(ii) removal from water

Zeolitic imidazolate frameworks (ZIF-8), and their derivatives, have been drawing increasing attention due to their thermal and chemical stability. The remarkable stability of ZIF-8 in aqueous and high pH environments renders it an ideal candidate for the removal of heavy metals from wastewater. In this study, we present the preparation of novel aldehyde-based zeolitic imidazolate frameworks (Ald-ZIF) through the integration of mixed-linkers: 2-methylimidazole (MIM) and imidazole-4-carbaldehyde (AldIM). The prepared Ald-ZIFs were post-synthetically modified with bisthiosemicarbazide (Bisthio) and thiosemicarbazide (Thio) groups, incorporating thiosemicarbazone (TSC) functionalities to the core of the framework. This modification results in the formation of TSC-functionalized ZIF derivatives (TSC-ZIFs). Thiosemicarbazones are versatile metal chelators, hence, adsorption properties of TSC-ZIFs for the removal of mercury(ii) from water were explored. Removal of mercury(ii) from homoionic aqueous solutions, binary and tertiary systems in competition with lead(ii) and cadmium(ii) under ambient conditions and neutral pH are reported in this study. MIM_3.5:Thio₁:Zn improved the removal efficiency of mercury(ii) from water, up to 97% in two hours, with an adsorption capacity of 1667 mg g^-1. Desorption of mercury(ii) from MIM_3.5:Thio₁:Zn was achieved under acidic conditions, regenerating MIM_3.5:Thio₁:Zn for five cycles of mercury(ii) removal. TSC-ZIF derivatives, designed and developed here, represent a new class of dynamically functionalized adsorption material displaying the advantages of simplicity, efficiency, and reusability.

Confinement-guided photophysics in MOFs, COFs, and cages

In this review, the dependence of the photophysical response of chromophores in the confined environments associated with crystalline scaffolds, such as metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and molecular cages, has been carefully evaluated. Tunability of the framework aperture, cavity microenvironment, and scaffold topology significantly affects emission profiles, quantum yields, or fluorescence lifetimes of confined chromophores. In addition to the role of the host and its effect on the guest, the methods for integration of a chromophore (e.g., as a framework backbone, capping linker, ligand side group, or guest) are discussed. The overall potential of chromophore-integrated frameworks for a wide-range of applications, including artificial biomimetic systems, white-light emitting diodes, photoresponsive devices, and fluorescent sensors with unparalleled spatial resolution are highlighted throughout the review.

Influence of Pore Structure and Metal-Node Geometry on the Polymerization of Ethylene over Cr-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have received increasing interest as solid single-site catalysts, owing to their tunable pore architecture and metal node geometry. The ability to exploit these modulators makes them prominent candidates for producing polyethylene (PE) materials with narrow dispersity index (Ð) values. Here a study is presented in which the ethylene polymerization properties, with Et2 AlCl as activator, of three renowned Cr-based MOFs, MIL-101(Cr)-NDC (NDC=2,6-dicarboxynapthalene), MIL-53(Cr) and HKUST-1(Cr), are systematically investigated. Ethylene polymerization reactions revealed varying catalytic activities, with MIL-101(Cr)-NDC and MIL-53(Cr) being significantly more active than HKUST-1(Cr). Analysis of the PE products revealed large Ð values, demonstrating that polymerization occurs over a multitude of active Cr centers rather than a singular type of Cr site. Spectroscopic experiments, in the form of powder X-ray diffraction (pXRD), UV/Vis-NIR diffuse reflectance spectroscopy (DRS) and CO probe molecule Fourier transform infrared (FTIR) spectroscopy corroborated these findings, indicating that indeed for each MOF unique active sites are generated, however without alteration of the original oxidation state. Furthermore, the pXRD experiments indicated that one major prerequisite for catalytic activity was the degree of MOF activation by the Et2 AlCl co-catalyst, with the more active materials portraying a larger degree of activation.

Biocatalytic Approach for Novel Functional Oligoesters of ε-Caprolactone and Malic Acid

Biocatalysis has developed in the last decades as a major tool for green polymer synthesis. The particular ability of lipases to catalyze the synthesis of novel polymeric materials has been demonstrated for a large range of substrates. In this work, novel functional oligoesters were synthesized from ε-caprolactone and D,L/L-malic acid by a green and sustainable route, using two commercially available immobilized lipases as catalysts. The reactions were carried out at different molar ratios of the comonomers in organic solvents, but the best results were obtained in solvent-free systems. Linear and cyclic oligomeric products with average molecular weights of about 1500 Da were synthesized, and the formed oligoesters were identified by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis. The oligoester synthesis was not enantioselective in the studied reaction conditions. The operational stability of both biocatalysts (Novozyme 435 and GF-CalB-IM) was excellent after reutilization in 13 batch reaction cycles. The thermal properties of the reaction products were investigated by thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis. The presence of polar pendant groups in the structure of these oligomers could widen the possible applications compared to the oligomers of ε-caprolactone or allow the conversion to other functional materials.

Applications of porous frameworks in solid-phase microextraction

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

Core-shell gold nanorod@mesoporous-MOF heterostructures for combinational phototherapy

Despite the increasing usage of porphyrinic metal-organic frameworks (MOFs) for combination therapy, the controlled encapsulation of inorganic nanoparticle-based therapeutics into such MOFs with specific structures has remained a major obstacle for improved tumor therapy. Here, we report the synthesis of a mesoporous MOF shell on the surface of gold nanorods (AuNRs), wherein a single AuNR is captured individually in single-crystalline MOFs with a controlled crystallographic orientation, for combinational phototherapy against solid tumors. The core-shell heterostructures have the benefits of a mesoporous structure and photoinduced singlet oxygen generation behavior characterized by the porphyrinic MOF shell, together with the plasmonic photothermal conversion characteristic of AuNRs. We demonstrated that the AuNR@MOF nanoplatform enables an efficient tumor treatment strategy by combining photodynamic therapy and photothermal therapy. We should emphasize that such systems could have applications beyond the field of cancer therapy, like plasmonic harvesting of light energy to induce and accelerate catalytic reactions within MOFs and multifunctional nanocarriers for agricultural formulations.

Polymethylaluminoxane organic frameworks (sMAOF) – highly active supports for slurry phase ethylene polymerisation

A series of modified solid polymethylaluminoxane (sMAO) catalyst supports have been developed for slurry phase ethylene polymerisation, using aryl di-ol modifier groups.

Coordination polymers with embedded recognition sites: lessons from cyclotriveratrylene-type ligands

Coordination polymers with molecular recognition sites are assembled using cyclotriveratrylene ligands. Many show differential guest-spaces with host and lattice sites available, however common host–guest and self-inclusion motifs can block sites.

Heterometallic coordination polymers as heterogeneous electrocatalysts

Heterometallic coordination polymers have been rapidly developed as heterogeneous electrocatalysts. This review highlights the synthesis strategies of these polymers and the relationships between structures and electrocatalytic performances.

A porous anionic zinc(ii) metal–organic framework for gas adsorption, selective uptake of dyes and sensing of Fe3+ by Tb3+ ion encapsulation

A 3D anionic, porous MOF exhibits selective adsorption of cationic dyes and can be used as a fast-response fluorescence sensor for the detection of Fe3+ ions by Tb3+ ion encapsulation.

The state of the field: from inception to commercialization of metal–organic frameworks

We provide a brief overview of the state of the MOF field from their inception to their synthesis, potential applications, and finally, to their commercialization.

100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics

The current global materials economy has long been inefficient due to unproductive reuse and recycling efforts. Within the wider materials portfolio, plastics have been revolutionary to many industries but they have been treated as disposable commodities leading to their increasing accumulation in the environment as waste. The field of chemistry has had significant bearing in ushering in the current plastics industry and will undoubtedly have a hand in transforming it to become more sustainable. Existing approaches include the development of synthetic biodegradable plastics and turning to renewable raw materials in order to produce plastics similar to our current petrol-based materials or to create new polymers. Additionally, chemists are confronting the environmental crisis by developing alternative recycling methods to deal with the legacy of plastic waste. Important emergent technologies, such as catalytic chemical recycling or upcycling, have the potential to alleviate numerous issues related to our current and future refuse and, in doing so, help pivot our materials economy from linearity to circularity.