Anthocyanin extraction from plant tissues: A review

Colorimetric Indicators Based on Anthocyanin Polymer Composites: A Review

This review explores the colorimetric indicators based on anthocyanin polymer composites fabricated in the last decade, in order to provide a comprehensive overview of their morphological and compositional characteristics and their efficacy in their various application fields. Notably, the structural properties of the developed materials and the effect on their performance will be thoroughly and critically discussed in order to highlight their important role. Finally, yet importantly, the current challenges and the future perspectives of the use of anthocyanins as components of colorimetric indicator platforms will be highlighted, in order to stimulate the exploration of new anthocyanin sources and the in-depth investigation of all the possibilities that they can offer. This can pave the way for the development of high-end materials and the expansion of their use to new application fields.

Extraction of red pigment from Chinese jujube peel and the antioxidant activity of the pigment extracts

Chinese jujube is a delicious fruit with high antioxidant nutrients. The fruit peel, however, is always discarded due to its indigestibility. In the current study, the jujube peels were collected for red pigment extraction. Six extraction-related parameters (ethanol concentration, solid-liquid ratio, material granularity, enzyme concentration, enzymolysis time, and pH) were optimized for jujube peel pigment extraction using Plackett–Burman and Box–Behnken designs. When the fruit peels were treated with 1.18% cellulase and 73% ethanol at pH 3.15, optimization enhanced the pigment extraction efficiency by 29.7% compared with the control. Ultra-high performance liquid chromatography (UHPLC) assay revealed that delphinidin 3-O-galactoside and cyanidin 3-O-rutinoside chloride were the major components of the jujube pigment extracts. Additionally, the red pigment extracts exhibited high free radical scavenging capacity and strong Fe3+ reducing power. Finally, it also provides us a simple new method for efficient extraction of natural antioxidants from discarded jujube peels.

Nature's palette: An emerging frontier for coloring dairy products

Consumers all across the world are looking for the most delectable and appealing foods, while also demanding products that are safer, more nutritious, and healthier. Substitution of synthetic colorants with natural colorants has piqued consumer and market interest in recent years. Due to increasing demand, extensive research has been conducted to find natural and safe food additives, such as natural pigments, that may have health benefits. Natural colorants are made up of a variety of pigments, many of which have significant biological potential. Because of the promising health advantages, natural colorants are gaining immense interest in the dairy industry. This review goes over the use of various natural colorants in dairy products which can provide desirable color as well as positive health impacts. The purpose of this review is to provide an in-depth look into the field of food (natural or synthetic) colorants applied in dairy products as well as their potential health benefits, safety, general trends, and future prospects  in food science and technology. In this paper, we listed a plethora of applications of natural colorants in various milk-based products.

Adding UVA and Far-Red Light to White LED Affects Growth, Morphology, and Phytochemicals of Indoor-Grown Microgreens

White light emitting diodes (LED) have commonly been used as a sole light source for the indoor production of microgreens. However, the response of microgreens to the inclusion of ultraviolet A (UVA) and/or far-red (FR) light to white LED light remains unknown. To investigate the effects of adding UVA and FR light to white LEDs on plant biomass, height, and the concentrations of phytochemicals, four species of microgreens including basil, cabbage, kale, and kohlrabi were grown under six light treatments. The first three treatments were white LED (control) and two UVA treatments (adding UVA to white LED for the whole growth period or for the last 5 days). Another three treatments consisted of adding FR to the first three treatments. The total photon flux density (TPFD) for all six light treatments was the same. The percentages of UVA and FR photons in the TPFD were 23% and 32%, respectively. Compared to white LEDs, adding UVA throughout the growth period did not affect plant height in all the species except for basil, where 9% reduction was observed regardless of the FR light. On the contrary, the addition of FR light increased plant heights by 9–18% for basil, cabbage, and kohlrabi, regardless of the UVA treatment, compared to white LED. Furthermore, regardless of UVA, adding FR to white LEDs reduced the plant biomass, total phenolic contents, and antioxidant concentrations for at least one species. There was no interaction between FR and UVA on all the above growth and quality traits for all the species. In summary, microgreens were more sensitive to the addition of FR light compared to UVA; however, the addition of FR to white LEDs may reduce yields and phytochemicals in some species.

Ultrasound-Assisted Extraction of Anthocyanins from Malus ‘Royalty’ Fruits: Optimization, Separation, and Antitumor Activity

Red Malus ‘Royalty’ fruits are rich in anthocyanins. This study aimed to obtain the optimal parameters for the extraction and separation of anthocyanins from Malus ‘Royalty’ fruits and to evaluate the inhibitory effect of the enriched anthocyanin fraction on gastric cancer cells. Ultrasonic-assisted extraction was used for the extraction of the anthocyanins of Malus ‘Royalty’ fruit, and the extraction results showed that the optimum parameters were an extraction temperature of 20 °C, a solid–liquid ratio of 1:6 (g/mL), ethanol and formic acid contents of 70% and 0.4%, respectively, an extraction time of 40 min, and an ultrasonic power of 300 W. The optimum extraction parameters to achieve the highest anthocyanin yield by a single-factor experiment coupled with response surface methodology were identified. The separation results showed that the AB-8 macroporous resin was a better purifying material, with 60% ethanol as an adsorbent, and the adsorption–desorption equilibrium times were 6 h and 1 h, respectively. Cyanidin-3-galactoside was the main body composition separation of anthocyanins by a high-performance liquid chromatography-diode array detector. The antitumor activity results showed that the anthocyanins of Malus ‘Royalty’ fruits have a significant inhibitory effect on the gastric cancer cell line BGC-803. The in vitro cell viability test of CCK-8 showed that the inhibitory effect on tumor cells was more significant with the increased anthocyanin concentration, with a half maximal inhibitory concentration (IC₅₀) value of 105.5 μg/mL. The cell morphology was observed by an inverted microscope, and it was found that the backbone of BGC-803 treated with a high concentration of anthocyanins was disintegrated and the nucleoplasm was concentrated. The mechanism of apoptosis was analyzed by Western blotting, and the results showed that with increasing anthocyanin concentration in the medium, the expression levels of the proapoptotic proteins Bax and Bak increased, and the expression levels of the antiapoptotic proteins Bcl-2 and Bcl-xL decreased, which coordinated the regulation of cell apoptosis. This research suggests that the enriched anthocyanin fraction from Malus ‘Royalty’ fruits have potential antitumor and adjuvant therapeutic effects on gastric cancer.

Comparing pH differential and methanol-based methods for anthocyanin assessments of strawberries

Anthocyanins are a group of water-soluble polyphenolic pigments found primarily in flowers, vegetables, and fruits. These pigments play critical roles in plant and human health. Spectrophotometric methods are a simple and inexpensive way to quantify anthocyanins in plant tissues. Two main spectrophotometric methods have been developed, organic solvent-based, and pH differential methods. Both of these methods are subject to interference from light-absorbing impurities and need to be optimized for different matrixes of different plant materials. Eight methods have been tested in this experiment to quantify anthocyanins in strawberry fruits. Six organic solvent-based methods tested methanol, chloroform-methanol, and MgO in different ratios. The other two methods were pH differential method and a combination of organic solvent-based and pH differential method. Two methods used organic solvents (methanol and chloroform-methanol) were the best in extracting anthocyanin from strawberry fruits. Adding MgO increased the pH of the extract and was less efficient in anthocyanin extraction. All other methods had lower anthocyanin yield compared with methanol and chloroform-methanol methods and are not recommended for strawberry fruit anthocyanin extraction.

Active edible films with plant extracts: a updated review of their types, preparations, reinforcing properties, and applications in muscle foods packaging and preservation

Currently, edible films have been increasingly explored to solve muscle food spoilage during storage, especially through the incorporation of plant extracts to develop edible packaging materials. Natural polymers matrices with plant extracts are befitting for fabricating edible films by casting methods. In the films system, the structure and physicochemical properties were strengthened via chemical interactions between active molecules in plant extracts and the reactive groups in the polymer chain. The antibacterial and antioxidant properties were dramatically reinforced through both physical and chemical actions of the plant extracts. Additionally, edible films imbedded with color-rich plant extracts could be considered as potential sensitive indicators to monitor the spoilage degree of muscle foods in response to change in gas or temperature. Furthermore, these films could increase sensory acceptability, improve quality and prolong the shelf life of muscle foods. In this article, the types, preparation methods and reinforcing properties of the edible films with plant extracts were discussed. Also, the applications of these films were summarized on quality maintenance and shelf-life extension and intelligent monitoring in muscle foods. Finally, a novel technology for film preparation achieving high-stability and sustained release of active compounds will become an underlying trend for application in muscle food packaging.

Involvement of Phospholipase C in Photosynthesis and Growth of Maize Seedlings

Phospholipase C is an enzyme that catalyzes the hydrolysis of glycerophospholipids and can be classified as phosphoinositide-specific PLC (PI-PLC) and non-specific PLC (NPC), depending on its hydrolytic substrate. In maize, the function of phospholipase C has not been well characterized. In this study, the phospholipase C inhibitor neomycin sulfate (NS, 100 mM) was applied to maize seedlings to investigate the function of maize PLC. Under the treatment of neomycin sulfate, the growth and development of maize seedlings were impaired, and the leaves were gradually etiolated and wilted. The analysis of physiological and biochemical parameters revealed that inhibition of phospholipase C affected photosynthesis, photosynthetic pigment accumulation, carbon metabolism and the stability of the cell membrane. High-throughput RNA-seq was conducted, and differentially expressed genes (DEGS) were found significantly enriched in photosynthesis and carbon metabolism pathways. When phospholipase C activity was inhibited, the expression of genes related to photosynthetic pigment accumulation was decreased, which led to lowered chlorophyll. Most of the genes related to PSI, PSII and TCA cycles were down-regulated and the net photosynthesis was decreased. Meanwhile, genes related to starch and sucrose metabolism, the pentose phosphate pathway and the glycolysis/gluconeogenesis pathway were up-regulated, which explained the reduction of starch and total soluble sugar content in the leaves of maize seedlings. These findings suggest that phospholipase C plays a key role in photosynthesis and the growth and development of maize seedlings.

Short-Term Pre-Harvest Supplemental Lighting with Different Light Emitting Diodes Improves Greenhouse Lettuce Quality

Winter–spring greenhouse vegetable production is limited by low-level natural light, resulting in decreased growth and quality. To investigate whether short-term pre-harvest supplemental lighting (SL) with light emitting diodes (LEDs) can address this issue, a study was conducted in a greenhouse in Dallas, Texas. Red leaf lettuce (Lactuca sativa L. ‘Red Mist’) plants grown in a hydroponic system were treated with daytime or nighttime SL with red (R) and blue (B) LEDs (RB-LED), blue and UVA LEDs (B/UVA-LED), or white LEDs (W-LED) for three days before harvest and compared to those without SL (control). All SL treatments provided a photon flux density of 167 μmol·m−2·s−1 for 12 h daily. Compared with the control, SL treatments increased leaf thickness and greenness, antioxidant capacity, and concentrations of phytonutrients such as anthocyanins, carotenoids, and total phenolics; however, shoot fresh biomass and total leaf area were generally not affected by SL. There were no differences in all of the above traits among W-LED, RB-LED and B/UVA-LED. Compared with daytime SL, nighttime SL increased leaf greenness and carotenoid concentration. In summary, all three LEDs with different spectra were effective in improving lettuce quality as short-term pre-harvest SL sources and nighttime SL was more effective than daytime SL; however, plant fresh weight and total leaf area were not affected.

Anthocyanin Extraction Method and Sample Preparation Affect Anthocyanin Yield of Strawberries

Anthocyanins are a group of pigments with antioxidant activities that are present naturally in plants. The role of the pigment in human health and its quantitative analysis has attracted a lot of attention globally. A well-known and accurate method of anthocyanin quantification is based on spectrophotometric methods. However, these methods are subject to interference from impurities and need to be optimized for different plant matrixes and extraction conditions. Two experiments were designed to study (1) the effect of plant preparation methods (eg, fresh, frozen, and freeze-dried puree) on anthocyanin yield and (2) the effect of five anthocyanin extraction methods on anthocyanin yield of freeze-dried strawberry puree. Sample preparation methods did not have any effect on anthocyanin yield. Freeze-dried samples were used for their stability (ease of use and flexibility) to compare extraction methods. The anthocyanin yield was affected by the extraction method. Two methods containing chloroform gave the highest anthocyanin yield. One method with methanol:water:HCl gave intermediate results, and the pH differential and the other method with methanol:water:HCl (80:20:1) gave the lowest anthocyanin yields. Processing time (incubation time) was lowest in the pH differential method; however, the haze produced in this method may interfere with the spectrophotometric assessment of anthocyanins.

Strategy for anthocyanins production: From efficient green extraction to novel microbial biosynthesis

Anthocyanins are widely distributed in nature and exhibit brilliant colors and multiple health-promoting effects; therefore, they are extensively incorporated into foods, pharmaceuticals, and cosmetic industries. Anthocyanins have been traditionally produced by plant extraction, which is characterized by high expenditure, low production rates, and rather complex processes, and hence cannot meet the increasing market demand. In addition, the emerging environmental issues resulting from traditional solvent extraction technologies necessitate a more efficient and eco-friendly alternative strategy for producing anthocyanins. This review summarizes the efficient approach for green extraction and introduces a novel strategy for microbial biosynthesis of anthocyanins, emphasizing the technological changes in production.

Total Anthocyanin Content of Strawberry and the Profile Changes by Extraction Methods and Sample Processing

Anthocyanins are the primarily pigments in many flowers, vegetables, and fruits and play a critical role in human and plant health. They are polyphenolic pigments that are soluble in water and usually quantified by spectrophotometric methods. The two main methods that quantify anthocyanins are pH differential and organic solvent-based methods. Our hypothesis was that these methods extract different anthocyanin profiles. Therefore, this experiment was designed to identify anthocyanin profiles that are extracted by pH differential and organic solvent-based methods and observe their total anthocyanin content from strawberries. Six methods were tested in this experiment to quantify and profile anthocyanins in strawberry fruits by spectrophotometry and Ultra High Performance Liquid Chromatography (UHPLC) respectively. Four methods used organic solvents (methanol, and chloroform-methanol) in different combinations. The next two methods were pH differential and a combination of organic solvent and the pH differential method. The results suggest that acidified chloroform-methanol extracted the highest anthocyanin content compared to water-based solvents. Methanol-water based solvents also performed better than methanol alone, because both methanol and water may extract different profiles of anthocyanins. Water-based extracts had the greatest absorbance at a lower wavelength (498 nm), followed by methanol (508 nm), and chloroform (530 nm). Chloroform-methanol solvent with higher pH (3.0) extracted pelargonidin as the main anthocyanin, while methanol and water-based solvents (with lower pH 1.0-2.0) extracted delphinidin as their main anthocyanin as identified by UHPLC. Therefore, chloroform-methanol and methanol-water solvents were the best solvents for extracting anthocyanins from strawberries. Also, freeze-dried strawberries had higher anthocyanin contents compared to fresh or frozen samples.

Antioxidant and Anti–Aging Activity of Freeze–Dried Alcohol–Water Extracts from Common Nettle (Urtica dioica L.) and Peppermint (Mentha piperita L.) in Elastomer Vulcanizates

The research article aimed to examine the antioxidant nature of freeze–dried extracts from Urtica dioica L. and Mentha piperita L. and to present a deep characterization of their influence on the properties of natural rubber–based vulcanizates before and after simulated aging processes. Natural extracts were prepared in three solvent systems at selected volume ratios: water (100), methanol–water (50/50), ethanol–water (50/50), which were further lyophilized and used as additive to natural rubber mixtures. Freeze–dried materials were investigated by UV–VIS diffuse reflectance spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), thermal stability by thermogravimetric analysis (TGA). Antioxidant activity and total phenolic content (TPC) were also examined. Prepared samples were subjected to accelerated simulated degradation processes by using ultraviolet and thermo-oxidative aging. Vulcanizates resistance to degradation effects was determined by the study of cross-linking density (equilibrium swelling method), mechanical properties (tensile strength, elongation at break) and color change in comparison with the results of the reference samples. The research showed that analyzed extracts are characterized by a high content of polyphenols and antioxidant activity, thus have a protective influence on elastomer vulcanizates against damaging effects of aging processes, which consequently extends the lifetime of materials.

Sustainability in Skin Care: Incorporation of Avocado Peel Extracts in Topical Formulations

The avocado peel is an agro-industrial by-product that has exhibited a massive increase in its production in the last few years. The reuse and valorisation of this by-product are essential since its disposal raises environmental concerns. In the present study, ethanolic extracts of avocado peels of the Hass variety were obtained, for three extraction times (1.5 h, 3 h and 4 h) and analysed for their antioxidant and antibacterial properties. Antioxidant evaluations of the extracts revealed that the extraction time of 1.5 h exhibited the best results amongst the three, with a DPPH inhibition percentage of 93.92 ± 1.29 and an IC₅₀ percentage, the necessary concentration of the extract to inhibit 50% of DPPH, of 37.30 ± 1.00. The antibacterial capacity of the extracts was evaluated and it was revealed that they were able to inhibit the growth and development of bacteria of the Staphylococcus family. The obtained extract was incorporated in two types of cosmetic formulations (oil-in-water and water-in-oil) and their stability was evaluated and compared with formulations containing synthetic preservatives (BHT and phenoxyethanol). The results of the stability evaluation suggest that the avocado peel extract has the potential to be incorporated in both types of emulsions, acting as an antioxidant and antibacterial agent, proving it to be a viable option to reduce/replace the use of synthetic preservatives. Furthermore, the avocado peel extract proved to be more effective and stable in oil-in-water emulsions. These results highlight the possibility of obtaining sustainable cosmetics, significantly reducing the negative impacts on the environment by the incorporation of extracts sourced from the avocado peel, an interesting source of phenolic compounds, an abundant and low-cost by-product.

Alternative Extraction and Downstream Purification Processes for Anthocyanins

Anthocyanins are natural pigments displaying different attractive colors ranging from red, violet, to blue. These pigments present health benefits that increased their use in food, nutraceuticals, and the cosmetic industry. However, anthocyanins are mainly extracted through conventional methods that are time-consuming and involve the use of organic solvents. Moreover, the chemical diversity of the obtained complex extracts make the downstream purification step challenging. Therefore, the growing demand of these high-value pigments has stimulated the interest in designing new, safe, cost-effective, and tunable strategies for their extraction and purification. The current review focuses on the potential application of compressed fluid-based (such as subcritical and supercritical fluid extraction and pressurized liquid extraction) and deep eutectic solvents-based extraction methods for the recovery of anthocyanins. In addition, an updated review of the application of counter-current chromatography for anthocyanins purification is provided as a faster and cost-effective alternative to preparative-scale HPLC.

Phytochemical Composition of Different Botanical Parts of Morus Species, Health Benefits and Application in Food Industry

In recent years, mulberry has acquired a special importance due to its phytochemical composition and its beneficial effects on human health, including antioxidant, anticancer, antidiabetic and immunomodulatory effects. Botanical parts of Morus sp. (fruits, leaves, twigs, roots) are considered a rich source of secondary metabolites. The aim of our study was to highlight the phytochemical profile of each of the botanical parts of Morus tree, their health benefits and applications in food industry with an updated review of literature. Black and white mulberries are characterized in terms of predominant phenolic compounds in correlation with their medical applications. In addition to anthocyanins (mainly cyanidin-3-O-glucoside), black mulberry fruits also contain flavonols and phenolic acids. The leaves are a rich source of flavonols, including quercetin and kaempferol in the glycosylated forms and chlorogenic acid as predominant phenolic acids. Mulberry bark roots and twigs are a source of prenylated flavonoids, predominantly morusin. In this context, the exploitation of mulberry in food industry is reviewed in this paper, in terms of developing novel, functional food with multiple health-promoting effects.

Recovery of value-added anthocyanins from mulberry by a cation exchange chromatography

Anthocyanins are often targets in polyphenol analysis. However, it's hard to effectively separate anthocyanin from copigments such as phenolic acid and flavanols due to their similar structure. Thus, a cation exchange chromatography with 001 × 7 has been developed, which is available for anthocyanins isolation both on a small and large scale. The optimal process condition of anthocyanins isolation was determined. Compared to the macroporous adsorbent resins and Strong Cation Exchange resin (SCX), 001X7 shows greater economic advantages in large-scale purification of anthocyanins. More than 95% purity of the anthocyanin fraction can be achieved through this approach. This method shows a path to provide large quantities of copigments-free anthocyanins from mulberry polyphenols for the further study of its biological effects and may be extended to other analytical methods of polyphenol isolation from other plant materials.

•

An economic cation-exchange resin 001X7 was used for anthocyanins purification.

•

Large-scale separation of anthocyanins and copigments was achieved by resin 001X7.

•

The separation condition was optimized and the purity of anthocyanins reached 95%.

•

The cation resin 001X7 is cost-effective and has industrial application potential.

Cyanidin-3-glucoside protects against high glucose-induced injury in human nucleus pulposus cells by regulating the Nrf2/HO-1 signaling

Cyanidin-3-glucoside (C3G) is a well-known natural anthocyanin with antioxidant and anti-inflammatory properties. In this study, we explored the role and action mechanism of C3G in high glucose (HG)-induced damage of human nucleus pulposus cells (HNPCs). Cell viability was assessed by CCK-8 assay. TUNEL assay was performed for detecting apoptotic rate. Western blot was performed to determine the expression levels of cl-caspase-3, caspase-3, Bax, Bim, collagen II, aggrecan, MMP-3, MMP-13, and ADAMTS5. ROS generation was analyzed using DCFH-DA staining. The Nrf2 was knocked down or overexpressed in HNPCs through transfection with si-Nrf2 or pcDNA3.0-Nrf2. C3G treatment (12.5, 25, and 50 μM) improved cell viability of HNPCs under HG condition. HG-induced cell apoptosis of HNPCs was attenuated by C3G with decreased apoptotic rate and relative levels of cl-caspase-3/caspase-3, Bax, and Bim. C3G treatment caused significant increase in expression levels of collagen II and aggrecan and decrease in the relative levels of MMP-3, MMP-13, and ADAMTS5. After treatment with C3G, ROS generation in HNPCs was markedly reduced. Treatment with N-Acetylcysteine (NAC) reversed HG-induced cell apoptosis and extracellular matrix (ECM) degradation. C3G treatment induced the expression of Nrf2 and HO-1 in HG-induced HNPCs. Moreover, knockdown of Nrf2 reversed the inhibitory effect of C3G on ROS production. Summarily, C3G exerted a protective effect on ROS-mediated cellular damage in HNPCs under HG condition, which was attributed to the induction of the Nrf2/HO-1 signaling pathway.

Quality Characteristics of Senior-Friendly Gelatin Gels Formulated with Hot Water Extract from Red Maple Leaf as a Novel Anthocyanin Source

The objectives of this study were to evaluate antioxidant capacity of hot water extract from red maple leaf with different extraction times (experiment I) and to determine their impacts on color, free anthocyanin content, and hardness of gelatin gels (experiment II). In experiment I, hot water extraction time (30, 60, 120, 180, and 360 min at 60 °C) was fixed as a main effect. The different extraction times had no impacts on total polyphenol content and DPPH radical scavenging activity (p > 0.05). However, extraction time for 360 min could decrease anthocyanin content as well as ferric reducing antioxidant power (p < 0.05). In experiment II, 6%, 18%, and 30% gelatin gels were prepared without/with red maple leaf extract (1000 mg/L). The red maple leaf extract significantly increased redness, yellowness, and hardness, but decreased free anthocyanin content. Such impacts were obviously observed at high gelatin concentration. Thus, red maple leaf extract could be a novel anthocyanin source for improving antioxidant capacity and reddish color of gelatin gels. However, the addition amount of red maple leaf extract may be limited in the development of senior-friendly jelly food for soft texture in that it could increase the hardness of the gelatin gel.

LEDitSHAKE: a lighting system to optimize the secondary metabolite content of plant cell suspension cultures

Plant secondary metabolites are widely used in the food, cosmetic and pharmaceutical industries. They can be extracted from sterile grown plant cell suspension cultures, but yields and quality strongly depend on the cultivation environment, including optimal illumination. Current shaking incubators do not allow different light wavelengths, intensities and photoperiods to be tested in parallel. We therefore developed LEDitSHAKE, a system for multiplexed customized illumination within a single shaking incubator. We used 3D printing to integrate light-emitting diode assemblies into flask housings, allowing 12 different lighting conditions (spectrum, intensity and photoperiod) to be tested simultaneously. We did a proof of principle of LEDitSHAKE using the system to optimize anthocyanin production in grapevine cell suspension cultures. The effect of 24 different light compositions on the total anthocyanin content of grapevine cell suspension cultures was determined using a Design of Experiments approach. We predicted the optimal lighting conditions for the upregulation and downregulation of 30 anthocyanins and found that short-wavelength light (blue, UV) maximized the concentration of most anthocyanins, whereas long-wavelength light (red) had the opposite effect. Therefore our results demonstrate proof of principle that the LEDitSHAKE system is suitable for the optimization of processes based on plant cell suspension cultures.

Sequential phenolic acid co-pigmentation pretreatment and contact ultrasound-assisted air drying to intensify blackberry drying and enhance anthocyanin retention: A study on mass transfer and phenolic distribution

In this work, the spraying of ethanol solution containing phenolic acid (ferulic acid or caffeic acid) was performed before subjecting to contact ultrasound-assisted air drying of blackberry. The mass transfer modeling results revealed that sonication intensified both internal water diffusion and external water exchange during drying, and ethanol pretreatment enhanced the effective diffusivity of water. Compared with air drying alone, the drying time for sequential ferulic acid pretreatment and drying with sonication was shortened by 89.2%. Owing to the co-pigmentation between phenolic acid and anthocyanins, the retention of anthocyanins was significantly enhanced after dehydration. At the end of drying, the total anthocyanin contents in the ultrasound-dried samples pretreated with ferulic acid and caffeic acid were 25.3% and 10.5% higher than the sonicated samples without pretreatments, respectively. Furthermore, drying simultaneously with sonication promoted the preservation of non-anthocyaninic soluble phenolics including catechin, phloretic acid, rutin in blackberry compared to air drying alone. Besides, bound phenolics in blackberry were less influences by the applied dehydration treatments. This study demonstrates that the combination of phenolic acid co-pigmentation pretreatment and ultrasound drying could be a promising method to protect anthocyanin pigments during dehydration of berry fruits.

Preparation of green and sustainable colorimetric cotton assay using natural anthocyanins for sweat sensing

Herein, we develop a novel smart cotton swab as a diagnostic assay for onsite monitoring of sweat pH changes toward potential applications in monitoring human healthcare and drug exam. Anthocyanin (Ac) can be extracted from Brassica oleracea var. capitata f. rubra using a simple procedure. Then, it can be used as a direct dye into cotton fibers using potash alum as mordant (M) to fix the anthocyanin dye onto the surface of the cotton fabric (Cot). This was monitored by generating mordant/anthocyanin nanoparticles (MAcNPs) onto the fabric surface. The cotton sensor assay demonstrated colorimetric changes in the ultraviolet-visible absorbance spectral analysis associated with a blueshift from 588 to 422 nm with increasing the pH of a perspiration simulant fluid. The biochromic performance of the dyed cotton diagnostic assay depended essentially on the halochromic activity of the anthocyanin spectroscopic probe to demonstrate a color change from pink to green due to intramolecular charge transfer occurring on the anthocyanin chromophore. After dyeing, no significant defects were detected in air-permeability and bend length. High colorfastness was investigated for the dyed cotton fabrics.

The isolation of water-soluble natural products - challenges, strategies and perspectives

Covering period: up to 2019Water-soluble natural products constitute a relevant group of secondary metabolites notably known for presenting potent biological activities. Examples are aminoglycosides, β-lactam antibiotics, saponins of both terrestrial and marine origin, and marine toxins. Although extensively investigated in the past, particularly during the golden age of antibiotics, hydrophilic fractions have been less scrutinized during the last few decades. This review addresses the possible reasons on why water-soluble metabolites are now under investigated and describes approaches and strategies for the isolation of these natural compounds. It presents examples of several classes of hydrosoluble natural products and how they have been isolated. Novel stationary phases and chromatography techniques are also reviewed, providing a perspective towards a renaissance in the investigation of water-soluble natural products.

Statistics on the bioactive anthocyanin/proanthocyanin products in China online sales

Due to their potential beneficial effects, anthocyanins and proanthocyanins have attracted great concern worldwide. Recently, anthocyanin/proanthocyanin-related health products have occupied a certain proportion of the market. However, there has not been a systematical assessment on collecting and analyzing the relevant information. In this study, information of anthocyanin/proanthocyanin-related health products on sale on the four major online shopping platforms in China has been collected from November 2020 to February 2021. A total of 144 valid samples from 91 brands were collected, among which blueberries and grape seeds are the main sources of anthocyanins and proanthocyanins, respectively. Besides, the average anthocyanins/proanthocyanins content in these products is 22.71%. Improving eyesight, anti-asthenopia and anti-oxidation are widely mentioned among the anthocyanin-related products, while more proanthocyanin-related products declare for anti-oxidation, whitening & spot lighting, and delay of skin aging & repairing skin damage effects. Among the products, 77.78% are capsules and tablets, and the average unit price of anthocyanins/proanthocyanins is $ 5.26/g. Data analysis shows that searching for high-quality raw materials, researching on the varieties and content of anthocyanins/proanthocyanins, focusing on the intake of specific population, and exploring better storage forms of anthocyanins/proanthocyanins may be important field in the future to promote the development of the anthocyanin/proanthocyanin-related health products.

Analysis of Flavonoid Metabolites in Watercress (Nasturtium officinale R. Br.) and the Non-Heading Chinese Cabbage (Brassica rapa ssp. chinensis cv. Aijiaohuang) Using UHPLC-ESI-MS/MS

Flavonoids from plants play an important role in our diet. Watercress is a special plant that is rich in flavonoids. In this study, four important watercress varieties were compared with non-heading Chinese cabbage by ultra-high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UHPLC-ESI-MS/MS). A total of 132 flavonoid metabolites (including 8 anthocyanins, 2 dihydroflavone, 3 dihydroflavonol, 1 flavanols, 22 flavones, 11 flavonoid carbonosides, 82 flavonols, and 3 isoflavones) were detected. Flavonoid metabolites varied widely in different samples. Both the non-heading Chinese cabbage and the variety of watercress from Guangdong, China, had their own unique metabolites. This work is helpful to better understand flavonoid metabolites between the non-heading Chinese cabbage and the other four watercress varieties, and to provide a reliable reference value for further research.

Transcriptome and metabolome analysis reveals anthocyanin biosynthesis pathway associated with ramie (Boehmeria nivea (L.) Gaud.) leaf color formation

Background

The bast fiber crop ramie can be used as high-quality forage resources, especially in tropical or subtropical region where there is lack of high-quality protein feed. Hongxuan No.1 (HX_1) is a unique ramie variety with a light reddish brown leaf color, which is obviously different from elite cultivar, Zhongzhu No.1 (ZZ_1, green leaf). While, the regulatory mechanism of color difference or secondary metaboliates synthesis between these two varieties have not been studied.

Results

In this study, phenotypic, transcriptomic and metabolomic analysis of HX_1 and ZZ_1 were conducted to elucidate the mechanism of leaf color formation. Chromaticity value and pigment content measuring showed that anthocyanin was the main metabolites imparting the different leaf color phenotype between the two varieties. Based on LC/MS, at least 14 anthocyanins were identified in leaves of HX_1 and ZZ_1, and the HX_1 showed the higher relative content of malvidin-, pelargonidin-,and cyanidin-based anthocyanins. Transcriptome and metabolome co-analysis revealed that the up-regulated expression of flavonoids synthesis gene was positively correlated with total anthocyanins accumulation in ramie leaf, and the differentfially expression of “blue gene” (F3’5’H) and the “red gene” (F3’H) in leaves bring out HX_1 metabolic flow more input into the cyanidin branch. Furthermore, the enrichment of glycosylated modification pathway (UGT and AT) and the expression of flavonoid 3-O-glucosyl transferase (UFGT), anthocyanidin reductase (ANR), in leaves were significantly influenced the diversity of anthocyanins between HX_1 and ZZ_1.

Conclusions

Phenotypic, transcriptomic and metabolomic analysis of HX_1 and ZZ_1 indicated that the expression levels of genes related to anthocyanin metabolism contribute to the color formation of ramie variety. Anthocyanins are important plant secandary metabilates with many physiological functions, the results of this study will deepened our understanding of ramie leaf color formation, and provided basis for molecular breeding of functional forage ramie.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-08007-0.

Improving the Berry Quality and Antioxidant Potential of Flame Seedless Grapes by Foliar Application of Chitosan-Phenylalanine Nanocomposites (CS-Phe NCs)

The production and sustainability of grape berries with high quality and health-promoting properties is a major goal. In this regard, nano-engineered materials are being used for improving the quality and marketability of berries. In this study, we investigated the potential role of chitosan–phenylalanine nanocomposites (CS–Phe NCs) in improving the quality of Flame Seedless (Vitis vinifera L.) grape berries, such as titratable acidity (TA), pH, total soluble solids (TSS), ascorbic acid, total phenolics, total flavonoids, anthocyanin, 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radical scavenging activity, and phenylalanine ammonia-lyase (PAL) activity. In this context, grape berries collected in two growing seasons (2018–2019) were screened. Regarding the experimental design, the treatments included chitosan at a 0.5% concentration (CS 0.5%), phenylalanine at 5 mM and 10 mM concentrations (Phe 5 mM and Phe 10 mM), and chitosan–phenylalanine nanocomposites (CS–Phe NCs) at 5 mM and 10 mM concentrations. The lowest TA was recorded in grape berries treated with CS–Phe NCs with a 10 mM concentration. However, treatments enhanced with TSS, which reached the highest value with 10 mM of CS–Phe NCs, were reflected as the highest ratio of TSS/TA with 10 mM of CS–Phe NC treatment. Nanocomposites (NCs) also increased pH values in both study years compared to the control. Similarly, the ascorbic acid and total phenolic content increased in response to NP treatment, reaching the highest value with 5 mM and 10 mM of CS–Phe NCs in 2018 and 2019, respectively. The highest flavonoid content was observed with 5 mM of CS–Phe NCs in both study years. In addition, the anthocyanin content increased with 5 and 10 mM of CS–Phe NCs. PAL activity was found to be the highest with 5 mM of CS–Phe NCs in both study years. In addition, in accordance with the increase in PAL activity, increased total phenolics and anthocyanin, and higher DPPH radical scavenging activity of the grapes were recorded with the treatments compared to the control. As deduced from the findings, the coating substantially influenced the metabolic pathway, and the subsequent alterations induced by the treatments were notably appreciated due to there being no adverse impacts perceived.

A Review of the Properties of Anthocyanins and Their Influence on Factors Affecting Cardiometabolic and Cognitive Health

The incidence of cardiovascular and metabolic diseases has increased over the last decades and is an important cause of death worldwide. An upcoming ingredient on the nutraceutical market are anthocyanins, a flavonoid subgroup, abundant mostly in berries and fruits. Epidemiological studies have suggested an association between anthocyanin intake and improved cardiovascular risk, type 2 diabetes and myocardial infarct. Clinical studies using anthocyanins have shown a significant decrease in inflammation markers and oxidative stress, a beneficial effect on vascular function and hyperlipidemia by decreasing low-density lipoprotein and increasing high-density lipoprotein. They have also shown a potential effect on glucose homeostasis and cognitive decline. This review summarizes the effects of anthocyanins in in-vitro, animal and human studies to give an overview of their application in medical prevention or as a dietary supplement.

Natural Anti-Inflammatory Compounds as Drug Candidates for Inflammatory Bowel Disease

Inflammatory bowel disease (IBD) represents chronic recurrent intestinal inflammation resulting from various factors. Crohn’s disease (CD) and ulcerative colitis (UC) have been identified as the two major types of IBD. Currently, most of the drugs for IBD used commonly in the clinic have adverse reactions, and only a few drugs present long-lasting treatment effects. Moreover, issues of drug resistance and disease recurrence are frequent and difficult to resolve. Together, these issues cause difficulties in treating patients with IBD. Therefore, the development of novel therapeutic agents for the prevention and treatment of IBD is of significance. In this context, research on natural compounds exhibiting anti-inflammatory activity could be a novel approach to developing effective therapeutic strategies for IBD. Phytochemicals such as astragalus polysaccharide (APS), quercetin, limonin, ginsenoside Rd, luteolin, kaempferol, and icariin are reported to be effective in IBD treatment. In brief, natural compounds with anti-inflammatory activities are considered important candidate drugs for IBD treatment. The present review discusses the potential of certain natural compounds and their synthetic derivatives in the prevention and treatment of IBD.

Red Seaweeds as a Source of Nutrients and Bioactive Compounds: Optimization of the Extraction

The present work aimed to determine the nutritional composition (ash, protein, fat, carbohydrate content and energy value), phenolic compounds, pigments and organic acids content of three typical red algae from the Northwest of Spain: Chondrus crispus, Mastocarpus stellatus, and Gigartina pistillata; as well as their antioxidant and antimicrobial activities. Furthermore, the present work compared two extraction techniques: conventional heat assisted extraction (HAE) and high pressure assisted extraction (HPAE) to maximize the yield and the concentration of target compounds. Different independent variables were considered for the response study. Time (t) and percentage of ethanol of the solvent (S) were chosen for both techniques and temperature (T) and pressure (P) were used for HAE and HPAE, respectively. The experiments were designed following a response surface methodology (RSM) approach. The obtained results showed a similar nutritional composition between algae samples: low-fat content and high content of proteins, carbohydrates and energy. All tested algae showed good antioxidant and antimicrobial properties. Finally, HEA demonstrated to be the most efficient extraction technique. This study confirms the potential of red algae to be part of the human diet as a source of non-animal protein, due to its nutritional content, phenolic profile, pigments concentration and bioactive properties, which proves that HAE is the optimum technique for the extraction maximization.

Optimization of Glycerol-Water Extraction of Selected Bioactive Compounds from Peppermint and Common Nettle

Current trends in the industry indicate that extraction solvents should conform with the ideals of so-called "green chemistry". Therefore, the objective of the presented study was to optimize the conditions for the extraction of polyphenols, flavonoids and chlorophyll from peppermint leaves (Mentha × piperita L., Lamiaceae) and from common nettle leaves (Urtica dioica L., Urticaceae) via green chemistry. The obtained experimental results were subjected to modelling by means of the multiple regression method, while the optimization of the system was addressed via the application of the desirability function. As a result of the use of glycerol-water systems for the extraction of the tested active compounds from mint leaves and nettle leaves, extracts with higher concentrations of polyphenols, flavonoids and chlorophyll were most often obtained, when compared with the use of classical solvents such as water and ethanol. In this work, we demonstrate that the extraction temperature has significant influence on the concentration of the determined components in the extracts. To obtain the highest values of the analysed parameters, leaves of peppermint should be extracted with glycerol-water mixture at the proportions of 30.5:69.5 at a temperature of 50 °C, while the optimal conditions for the extraction of leaves of common nettle were the glycerol-water proportions of 12.5:87.5 and extraction temperature of 20 °C. Comparing the average percentage differences between the highest values of the analysed parameters obtained in the experiment and the approximated values for various temperatures with the level of desirability, one can note a high correlation that, in the analysed examples, amounted to 0.9681. The study showed that glycerol can be an alternative solvent in the extraction of polyphenols, flavonoids and chlorophyll, replacing, e.g., ethanol-which, for various reasons, cannot always be used.

Toward developing natural histologic stains using anthocyanins: A novel approach

Introduction:

In the present-day scenario, wherein histotechnological laboratory personnel come into contact with numerous hazardous chemicals every day, laboratories are emphasizing on development of safer and environment-friendly alternatives globally which are easily available and feasible. In this context, we have attempted to utilize anthocyanins, a family of pigments naturally occurring in fruits and flowers and which are already used as natural food colorants, for assessing their utility as histological stains.

Materials and methods:

Juices of thin consistency from well-ripened pomegranates were obtained by using a juicer with blender functions. Formalin-fixed paraffin-embedded 4 μm thin sections were immersed in this solution for 2 h, during which the solution was periodically monitored. Several modifications were attempted such as the addition of Citrus limon (lemon) extract or acetic acid, change in orientation of the slides and refrigeration of the solution during the staining procedure.

Results:

A peculiar pattern of reasonably diagnostic staining was observed in which the basal and suprabasal cells, basement membrane, inflammatory cells and collagen fibers stained prominently with a magenta color. The addition of lemon, horizontal orientation of slides and refrigeration each separately led to an improvement in staining characteristics. The addition of 4% acetic acid and refrigeration of the solution each led to an improvement in longevity of the staining solution.

Conclusion:

Anthocyanins could potentially be used as viable histological stains having advantages of availability, feasibility, color stability and nontoxicity, although numerous modifications to improve longevity of staining solution and staining characteristics are warranted by further research for which the present study could serve as a pretext.

Effect of Pre-Harvest Supplemental UV-A/Blue and Red/Blue LED Lighting on Lettuce Growth and Nutritional Quality

Blue light and ultra-violet (UV) light have been shown to influence plant growth, morphology, and quality. In this study, we investigated the effects of pre-harvest supplemental lighting using UV-A and blue (UV-A/Blue) light and red and blue (RB) light on growth and nutritional quality of lettuce grown hydroponically in two greenhouse experiments. The RB spectrum was applied pre-harvest for two days or nights, while the UV-A/Blue spectrum was applied pre-harvest for two or four days or nights. All pre-harvest supplemental lighting treatments had a same duration of 12 h with a photon flux density (PFD) of 171 μmol m−2 s−1. Results of both experiments showed that pre-harvest supplemental lighting using UV A/Blue or RB light can increase the growth and nutritional quality of lettuce grown hydroponically. The enhancement of lettuce growth and nutritional quality by the pre-harvest supplemental lighting was more effective under low daily light integral (DLI) compared to a high DLI and tended to be more effective when applied during the night, regardless of spectrum.

Natural Antioxidants Improve the Vulnerability of Cardiomyocytes and Vascular Endothelial Cells under Stress Conditions: A Focus on Mitochondrial Quality Control

Cardiovascular disease has become one of the main causes of human death. In addition, many cardiovascular diseases are accompanied by a series of irreversible damages that lead to organ and vascular complications. In recent years, the potential therapeutic strategy of natural antioxidants in the treatment of cardiovascular diseases through mitochondrial quality control has received extensive attention. Mitochondria are the main site of energy metabolism in eukaryotic cells, including myocardial and vascular endothelial cells. Mitochondrial quality control processes ensure normal activities of mitochondria and cells by maintaining stable mitochondrial quantity and quality, thus protecting myocardial and endothelial cells against stress. Various stresses can affect mitochondrial morphology and function. Natural antioxidants extracted from plants and natural medicines are becoming increasingly common in the clinical treatment of diseases, especially in the treatment of cardiovascular diseases. Natural antioxidants can effectively protect myocardial and endothelial cells from stress-induced injury by regulating mitochondrial quality control, and their safety and effectiveness have been preliminarily verified. This review summarises the damage mechanisms of various stresses in cardiomyocytes and vascular endothelial cells and the mechanisms of natural antioxidants in improving the vulnerability of these cell types to stress by regulating mitochondrial quality control. This review is aimed at paving the way for novel treatments for cardiovascular diseases and the development of natural antioxidant drugs.

Anthocyanins extraction from Hibiscus sabdariffa and identification of phenolic compounds associated with their stability

BACKGROUND

One of the main disadvantages of red pigments used in foods is their low extraction yield and storage stability. Roselle flowers are sources of anthocyanins; however, these are unstable during storage, but this could be improved with phenolic compounds, which establish bonds with the anthocyanins. The aim of this work was to identify conditions to improve the extraction efficiency and color stability of Hibiscus sabdariffa extract and, furthermore, to identify the phenolic compounds associated with color stability of roselle.

RESULTS

The temperature of extraction (35 and 75 °C), the time of extraction (15 and 60 min), type of acid (acetic and citric), percentage of acid (0.5 and 2.0%) and the water:ethanol ratio (20:80 and 80:20) did not affect the yield of anthocyanins; only the solid:solvent ratio had an effect in the anthocyanin extraction yield. The extraction with 80% ethanol decreased up to 50% the anthocyanin degradation in the extracts stored at 4, 25, 35, 45, and 80 °C. Phenolic acids and flavonoids were quantified by ultrahigh-performance liquid chromatography coupled with triple quadrupole electrospray ionization mass spectrometry. These compounds were analyzed using principal component analysis, and the H. sabdariffa extract, with greater stability, was found to be associated with the presence of quercetin, myricetin, kaempferol 3-O-glucose, ellagic acid, and rutin.

CONCLUSION

H. sabdariffa extract with increased color stability was extracted with a higher proportion of ethanol and the improvement in the color stability was attributed to the co-extraction of phenolic compounds, principally flavonoids that could interact with anthocyanins and stabilize them. © 2020 Society of Chemical Industry.

Fabrication of kappa-carrageenan hydrogels with cinnamon essential oil/hydroxypropyl-β-cyclodextrin composite: Evaluation of physicochemical properties, release kinetics and antimicrobial activity

A novel antimicrobial gel composed of κ-carrageenan (KC) and a cinnamon essential oil (CEO)/hydroxypropyl-β-cyclodextrin (HPCD) composite was developed. The CEO/HPCD composite was characterized by UV-visible spectrophotometry and Fourier-transform infrared spectroscopy (FT-IR), and the changes in the principal components of CEO upon encapsulation by HPCD were analyzed by gas chromatography-mass spectrometry (GC-MS). The physicochemical properties, release kinetics and antimicrobial activity of the fabricated gels were investigated. The hardness of the KC gels increased with composite concentration in the range of 1.0-3.0% (w/v) and thereafter decreased. A similar trend was observed for the gumminess and chewiness, whereas the gel springiness remained essentially constant. The CEO/HPCD composite also enhanced the fluidity of the system, and the syneresis was positively correlated with the composite concentration. The controlled release of CEO from the gels was affected by the relative humidity (RH) and CEO content. The Ritger-Peppas model indicated that the CEO release kinetics from the gels proceeded through a combination of diffusion and framework erosion. The KC gel containing 5% CEO/HPCD composite displayed effective antimicrobial activity, prolonging the shelf life of sliced bread by at least two days. The reported gels may have potential applications as a promising material for food preservation.