51
|
Turturro MV, Sokic S, Larson JC, Papavasiliou G. Effective tuning of ligand incorporation and mechanical properties in visible light photopolymerized poly(ethylene glycol) diacrylate hydrogels dictates cell adhesion and proliferation. Biomed Mater 2013; 8:025001. [PMID: 23343533 DOI: 10.1088/1748-6041/8/2/025001] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
Cell behavior is guided by the complex interplay of matrix mechanical properties as well as soluble and immobilized biochemical signals. The development of synthetic scaffolds that incorporate key functionalities of the native extracellular matrix (ECM) for support of cell proliferation and tissue regeneration requires that stiffness and immobilized concentrations of ECM signals within these biomaterials be tuned and optimized prior to in vitro and in vivo studies. A detailed experimental sensitivity analysis was conducted to identify the key polymerization conditions that result in significant changes in both elastic modulus and immobilized YRGDS within visible light photopolymerized poly(ethylene glycol) diacrylate hydrogels. Among the polymerization conditions investigated, single as well as simultaneous variations in N-vinylpyrrolidinone and precursor concentrations of acryl-PEG3400-YRGDS resulted in a broad range of the hydrogel elastic modulus (81-1178 kPa) and YRGDS surface concentration (0.04-1.72 pmol cm(-2)). Increasing the YRGDS surface concentration enhanced fibroblast cell adhesion and proliferation for a given stiffness, while increases in the hydrogel elastic modulus caused decreases in cell adhesion and increases in proliferation. The identification of key polymerization conditions is critical for the tuning and optimization of biomaterial properties and the controlled study of cell-substrate interactions.
Collapse
Affiliation(s)
- Michael V Turturro
- Department of Biomedical Engineering, Illinois Institute of Technology, Wishnick Hall 314, 3255 S Dearborn St., Chicago, Illinois, 60616, USA.
| | | | | | | |
Collapse
|
52
|
Development of amphiphilic, enzymatically-degradable PEG-peptide conjugate as cell crosslinker for spheroid formation. Colloids Surf B Biointerfaces 2013; 101:223-7. [DOI: 10.1016/j.colsurfb.2012.06.033] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2012] [Accepted: 06/26/2012] [Indexed: 11/19/2022]
|
53
|
Rice JJ, Martino MM, De Laporte L, Tortelli F, Briquez PS, Hubbell JA. Engineering the regenerative microenvironment with biomaterials. Adv Healthc Mater 2013. [PMID: 23184739 DOI: 10.1002/adhm.201200197] [Citation(s) in RCA: 270] [Impact Index Per Article: 24.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
Modern synthetic biomaterials are being designed to integrate bioactive ligands within hydrogel scaffolds for cells to respond and assimilate within the matrix. These advanced biomaterials are only beginning to be used to simulate the complex spatio-temporal control of the natural healing microenvironment. With increasing understanding of the role of growth factors and cytokines and their interactions with components of the extracellular matrix, novel biomaterials are being developed that more closely mimic the natural healing environments of tissues, resulting in increased efficacy in applications of tissue repair and regeneration. Herein, the important aspects of the healing microenvironment, and how these features can be incorporated within innovative hydrogel scaffolds, are presented.
Collapse
Affiliation(s)
- Jeffrey J Rice
- Institute for Bioengineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
| | | | | | | | | | | |
Collapse
|
54
|
|
55
|
Schukur L, Zorlutuna P, Cha JM, Bae H, Khademhosseini A. Directed differentiation of size-controlled embryoid bodies towards endothelial and cardiac lineages in RGD-modified poly(ethylene glycol) hydrogels. Adv Healthc Mater 2013; 2:195-205. [PMID: 23193099 PMCID: PMC3635117 DOI: 10.1002/adhm.201200194] [Citation(s) in RCA: 52] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/09/2012] [Revised: 07/24/2012] [Indexed: 12/26/2022]
Abstract
Recent advances in stem cell research have demonstrated the importance of microenvironmental cues in directing stem cell fate towards specific cell lineages. For instance, the size of the embryoid body (EB) was shown to play a role in stem cell differentiation. Other studies have used cell adhesive RGD peptides to direct stem cell fate towards endothelial cells. In this study, materials and cell-based approaches are combined by using microwell arrays to produce size-controlled EBs and encapsulating the resulting aggregates in high molecular weight PEG-4 arm acrylate with and without conjugated RGD to study their effect on stem cell differentiation in a 3D microenvironment. Increasing EB size is observed along with a decrease in the total number of EBs in pristine PEG hydrogel, regardless of the initial EB size. In correlation with this aggregation, EBs in PEG show enhanced cardiogenic differentiation compared to RGD-PEG hydrogel. Both aggregation and cardiogenic differentiation are significantly reduced when RGD peptides are introduced to the microenvironment, while endothelial cell differentiation is accelerated by 3 to 5 days, depending on the EB size, and doubled over the course of cell culture for both EB sizes. Presented results indicate that RGD sequence has a dominant effect in driving endothelial cell differentiation in size-controlled EBs, while pristine multi-arm, high molecular weight PEG can induce cardiogenic differentiation, possibly through EB aggregation. The photopatternable nature of the hydrogel used in this study enabled patterning of such domains devoid or abundant of cell attachment sequences. Therefore, these hydrogels can potentially be used for spatially patterned embryonic stem cell differentiation, which may be beneficial for tissue engineering and regenerative medicine applications.
Collapse
Affiliation(s)
- Lina Schukur
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA, Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 02139, USA, 65 Landsdowne Street Cambridge, MA 02139, USA
- Institute of Biochemistry and Molecular Biology, Medical School, RWTH Aachen University, 52074, Germany
| | - Pinar Zorlutuna
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA, Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 02139, USA, 65 Landsdowne Street Cambridge, MA 02139, USA
| | - Jae Min Cha
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA, Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 02139, USA, 65 Landsdowne Street Cambridge, MA 02139, USA
| | - Hojae Bae
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA, Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 02139, USA, 65 Landsdowne Street Cambridge, MA 02139, USA
| | - Ali Khademhosseini
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA, Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, 02139, USA, 65 Landsdowne Street Cambridge, MA 02139, USA
- Wyss Institute for Biologically Inspired Engineering, Department of Medicine, Brigham and Women’s Hospital, Harvard Medical School, 02115, USA
| |
Collapse
|
56
|
Yao R, Zhang R, Lin F, Luan J. Injectable cell/hydrogel microspheres induce the formation of fat lobule-like microtissues and vascularized adipose tissue regeneration. Biofabrication 2012; 4:045003. [PMID: 23075755 DOI: 10.1088/1758-5082/4/4/045003] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
In this paper, we demonstrated that collagen/alginate microspheres could be generated by a non-contact microfabrication device and serve as excellent cell embedding and delivery devices as they were porous, injectable and able to provide growth- and differentiation-supporting matrix for human adipose-derived stem cells (hASCs). The microsphere matrix demonstrated highly porous structure and mechanical stability for as long as 90 days. hASCs demonstrated high viability after microsphere formation as well as higher proliferation and more mature adipocytes induction compared to two-dimensional culture. After four weeks culture in adipogenic differentiation medium, adipocytes/collagen/alginate microspheres highly mimicking natural fat lobules were obtained and injected subcutaneously into the head of node mice. The in vivo study demonstrated vascularized adipose tissue formation in four weeks. The regenerated vasculature among the transplantation showed functional anastomosis with host vasculature, suggesting that these cell/hydrogel microspheres present injectable adipocytes delivery devices capable of generating vascularized adipose tissue in vivo and thus suitable for cell transplantation and tissue regeneration.
Collapse
Affiliation(s)
- Rui Yao
- Department of Mechanical Engineering, Tsinghua University, Beijing 100084, People's Republic of China.
| | | | | | | |
Collapse
|
57
|
Chan BK, Wippich CC, Wu CJ, Sivasankar PM, Schmidt G. Robust and semi-interpenetrating hydrogels from poly(ethylene glycol) and collagen for elastomeric tissue scaffolds. Macromol Biosci 2012; 12:1490-501. [PMID: 23070957 DOI: 10.1002/mabi.201200234] [Citation(s) in RCA: 37] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2012] [Revised: 08/17/2012] [Indexed: 12/11/2022]
Abstract
Here we present an injectable PEG/collagen hydrogel system with robust networks for use as elastomeric tissue scaffolds. Covalently crosslinked PEG and physically crosslinked collagen form semi-interpenetrating networks. The mechanical strength of the hydrogels depends predominantely on the PEG concentration but the incorporation of collagen into the PEG network enhances hydrogel viscoelasticity, elongation, and also cell adhesion properties. Experimental data show that this hydrogel system exhibits tunable mechanical properties that can be further developed. The hydrogels allow cell adhesion and proliferation in vitro. The results support the prospect of a robust and semi-interpenetrating biomaterial for elastomeric tissue scaffolds applications.
Collapse
Affiliation(s)
- Burke K Chan
- Weldon School of Biomedical Engineering, Purdue University, 206 S. Martin Jischke Drive, West Lafayette, IN 47907, USA
| | | | | | | | | |
Collapse
|
58
|
Tonelli FMP, Santos AK, Gomes KN, Lorençon E, Guatimosim S, Ladeira LO, Resende RR. Carbon nanotube interaction with extracellular matrix proteins producing scaffolds for tissue engineering. Int J Nanomedicine 2012; 7:4511-29. [PMID: 22923989 PMCID: PMC3423153 DOI: 10.2147/ijn.s33612] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023] Open
Abstract
In recent years, significant progress has been made in organ transplantation, surgical reconstruction, and the use of artificial prostheses to treat the loss or failure of an organ or bone tissue. In recent years, considerable attention has been given to carbon nanotubes and collagen composite materials and their applications in the field of tissue engineering due to their minimal foreign-body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth, proliferation, and differentiation. Recently, grafted collagen and some other natural and synthetic polymers with carbon nanotubes have been incorporated to increase the mechanical strength of these composites. Carbon nanotube composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering.
Collapse
Affiliation(s)
- Fernanda M P Tonelli
- Cell Signaling and Nanobiotechnology Laboratory, Department of Biochemistry and Immunology, Federal University of Minas Gerais, Belo Horizonte, Brazil
| | | | | | | | | | | | | |
Collapse
|
59
|
Affiliation(s)
| | - Kristi S. Anseth
- Department of Chemical and Biological Engineering and
- Howard Hughes Medical Institute, University of Colorado, Boulder, Colorado 80309-0424; ,
| |
Collapse
|
60
|
Ventre M, Causa F, Netti PA. Determinants of cell-material crosstalk at the interface: towards engineering of cell instructive materials. J R Soc Interface 2012; 9:2017-32. [PMID: 22753785 DOI: 10.1098/rsif.2012.0308] [Citation(s) in RCA: 132] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023] Open
Abstract
The development of novel biomaterials able to control cell activities and direct their fate is warranted for engineering functional biological tissues, advanced cell culture systems, single-cell diagnosis as well as for cell sorting and differentiation. It is well established that crosstalk at the cell-material interface occurs and this has a profound influence on cell behaviour. However, the complete deciphering of the cell-material communication code is still far away. A variety of material surface properties have been reported to affect the strength and the nature of the cell-material interactions, including biological cues, topography and mechanical properties. Novel experimental evidence bears out the hypothesis that these three different signals participate in the same material-cytoskeleton crosstalk pathway via adhesion plaque formation dynamics. In this review, we present the relevant findings on material-induced cell response along with the description of cell behaviour when exposed to arrays of signals-biochemical, topographical and mechanical. Finally, with the aid of literature data, we attempt to draw unifying elements of the material-cytoskeleton-cell fate chain.
Collapse
Affiliation(s)
- Maurizio Ventre
- Center for Advanced Biomaterials for Health Care@CRIB, Istituto Italiano di Tecnologia and Interdisciplinary Research Center on Biomaterials, University of Naples Federico II, Napoli, Italy
| | | | | |
Collapse
|
61
|
Yao R, Zhang R, Luan J, Lin F. Alginate and alginate/gelatin microspheres for human adipose-derived stem cell encapsulation and differentiation. Biofabrication 2012; 4:025007. [PMID: 22556122 DOI: 10.1088/1758-5082/4/2/025007] [Citation(s) in RCA: 101] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Abstract
Human adipose-derived stem cells (hADSC) encapsulated in alginate and alginate/gelatin microspheres with adjustable properties were fabricated via an improved microsphere generating device. The mechanism of the device, porous property, swelling behavior of the microspheres and hADSC proliferation as well as adipogenic differentiation were studied extensively. Microspheres with high-ratio evenly distributed adipocytes could be obtained by utilizing the proper matrix material and manufacturing parameters. The adipocyte/hADSC microspheres were a sound in vitro mimicking of a natural fat lobule and therefore a good candidate for adipose tissue engineering and regenerative medicine.
Collapse
Affiliation(s)
- Rui Yao
- Department of Mechanical Engineering, Tsinghua University, Beijing 100084, People's Republic of China.
| | | | | | | |
Collapse
|
62
|
Zorlutuna P, Annabi N, Camci-Unal G, Nikkhah M, Cha JM, Nichol JW, Manbachi A, Bae H, Chen S, Khademhosseini A. Microfabricated biomaterials for engineering 3D tissues. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2012; 24:1782-804. [PMID: 22410857 PMCID: PMC3432416 DOI: 10.1002/adma.201104631] [Citation(s) in RCA: 269] [Impact Index Per Article: 22.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2011] [Indexed: 05/04/2023]
Abstract
Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.
Collapse
Affiliation(s)
- Pinar Zorlutuna
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | | | | | | | | | | | | | | | | | | |
Collapse
|
63
|
Patel D, Vandromme SE, Reid ME, Taite LJ. Synergistic Activity of αvβ3 Integrins and the Elastin Binding Protein Enhance Cell-Matrix Interactions on Bioactive Hydrogel Surfaces. Biomacromolecules 2012; 13:1420-8. [DOI: 10.1021/bm300144y] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
Affiliation(s)
- Dhaval Patel
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, Georgia 30332-0100, United States
| | - Susan E. Vandromme
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, Georgia 30332-0100, United States
| | - Michael E. Reid
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, Georgia 30332-0100, United States
| | - Lakeshia J. Taite
- School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, Georgia 30332-0100, United States
| |
Collapse
|
64
|
Jun HW, Paramonov SE, Dong H, Forraz N, McGuckin C, Hartgerink JD. Tuning the mechanical and bioresponsive properties of peptide-amphiphile nanofiber networks. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2012; 19:665-76. [DOI: 10.1163/156856208784089625] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Affiliation(s)
- Ho-Wook Jun
- a Department of Chemistry, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA; Department of Bioengineering, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA
| | - Sergey E. Paramonov
- b Department of Chemistry, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA; Department of Bioengineering, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA
| | - He Dong
- c Department of Chemistry, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA; Department of Bioengineering, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA
| | - Nicolas Forraz
- d School of Clinical & Laboratory Sciences, Medical School, University of Newcastle upon Tyne, UK
| | - Colin McGuckin
- e School of Clinical & Laboratory Sciences, Medical School, University of Newcastle upon Tyne, UK
| | - Jeffrey D. Hartgerink
- f Department of Chemistry, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA; Department of Bioengineering, Rice University, 6100 Main street, MS 60, Houston, TX 77005, USA
| |
Collapse
|
65
|
Hynd MR, Turner JN, Shain W. Applications of hydrogels for neural cell engineering. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2012; 18:1223-44. [DOI: 10.1163/156856207782177909] [Citation(s) in RCA: 56] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Affiliation(s)
- Matthew R. Hynd
- a Laboratory of Nervous System Disorders, Wadsworth Center, P.O. Box 509, Empire State Plaza, Albany, NY 12201-0509, USA
| | - James N. Turner
- b Laboratory of Nervous System Disorders, Wadsworth Center, P.O. Box 509, Empire State Plaza, Albany, NY 12201-0509, USA
| | - William Shain
- c Laboratory of Nervous System Disorders, Wadsworth Center, P.O. Box 509, Empire State Plaza, Albany, NY 12201-0509, USA
| |
Collapse
|
66
|
Kobatake E, Takahashi R, Mie M. Construction of a bFGF-Tethered Extracellular Matrix Using a Coiled-Coil Helical Interaction. Bioconjug Chem 2011; 22:2038-42. [DOI: 10.1021/bc200249u] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Eiry Kobatake
- Department of Biological Information, Graduate School of Bioscience and Biotechnology, Tokyo Institute of Technology B-28 4259, Nagatsuta, Midori-ku, Yokohama, 226-8501, Japan
| | - Ryota Takahashi
- Department of Biological Information, Graduate School of Bioscience and Biotechnology, Tokyo Institute of Technology B-28 4259, Nagatsuta, Midori-ku, Yokohama, 226-8501, Japan
| | - Masayasu Mie
- Department of Biological Information, Graduate School of Bioscience and Biotechnology, Tokyo Institute of Technology B-28 4259, Nagatsuta, Midori-ku, Yokohama, 226-8501, Japan
| |
Collapse
|
67
|
Fibrin hydrogels for lentiviral gene delivery in vitro and in vivo. J Control Release 2011; 157:80-5. [PMID: 21907251 DOI: 10.1016/j.jconrel.2011.08.036] [Citation(s) in RCA: 53] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2011] [Accepted: 08/24/2011] [Indexed: 02/02/2023]
Abstract
Gene delivery from hydrogels represents a versatile approach for localized expression of tissue inductive factors that can promote cellular processes that lead to regeneration. Lentiviral gene therapy vectors were entrapped within fibrin hydrogels, either alone or complexed with hydroxylapatite (HA) nanoparticles. The inclusion of HA into the hydrogel led to the formation of small aggregates distributed throughout the hydrogel, with no obvious alteration of the pore structure outside the aggregates. The presence of HA slowed hydrogel degradation by collagenase and plasmin relative to fibrin alone, and also decreased the rate of cell migration. Lentivirus had similar release from the fibrin hydrogels formed with or without HA. The altered hydrogel properties suggest an interaction between the nanoparticle and fibrin, which may displace the virus from the particle leading to similar release profiles. Transgene expression by cells migrating into the hydrogel in vitro was reduced in the presence of HA, consistent with the role of cell migration on transgene expression. In vivo, lentivirus loaded fibrin hydrogels promoted localized transgene expression that increased through day 9 and decreased through day 14. For the fibrin only hydrogels, expression continued to decline after day 14. However, hydrogels with HA maintained this transgene expression level for an additional 2 weeks before declining. Immunostaining identified transgene primarily outside the fibrin-HA gel at day 9; however, at day 21, transgene expression was observed primarily within the fibrin-HA gel. The localized delivery of lentivirus provides an opportunity to enhance the bioactivity of fibrin hydrogels for a wide range of applications in regenerative medicine.
Collapse
|
68
|
Franco C, Price J, West J. Development and optimization of a dual-photoinitiator, emulsion-based technique for rapid generation of cell-laden hydrogel microspheres. Acta Biomater 2011; 7:3267-76. [PMID: 21704198 DOI: 10.1016/j.actbio.2011.06.011] [Citation(s) in RCA: 74] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2011] [Revised: 06/03/2011] [Accepted: 06/07/2011] [Indexed: 01/10/2023]
Abstract
A growing number of clinical trials explore the use of cell-based therapies for the treatment of disease and restoration of damaged tissue; however, limited cell survival and engraftment remains a significant challenge. As the field continues to progress, microencapsulation strategies are proving to be a valuable tool for protecting and supporting these cell therapies while preserving minimally invasive delivery. This work presents a novel, dual-photoinitiator technique for encapsulation of cells within hydrogel microspheres. A desktop vortexer was used to generate an emulsion of poly(ethylene glycol) diacrylate (PEGDA) or PEGDA-based precursor solution in mineral oil. Through an optimized combination of photoinitiators added to both the aqueous and the oil phase, rapid gelation of the suspended polymer droplets was achieved. The photoinitiator combination provided superior cross-linking consistency and greater particle yield, and required lower overall initiator concentrations compared with a single initiator system. When cells were combined with the precursor solution, these benefits translated to excellent microencapsulation yield with 60-80% viability for the tested cell types. It was further shown that the scaffold material could be modified with cell-adhesive peptides to be used as surface-seeded microcarriers, or additionally with enzymatically degradable sequences to support three-dimensional spreading, migration and long-term culture of encapsulated cells. Three cell lines relevant to neural stem cell therapies are demonstrated here, but this technology is adaptable, scalable and easy to implement with standard laboratory equipment, making it a useful tool for advancing the next generation of cell-based therapeutics.
Collapse
|
69
|
Network connectivity, mechanical properties and cell adhesion for hyaluronic acid/PEG hydrogels. Biomaterials 2011; 32:6456-70. [DOI: 10.1016/j.biomaterials.2011.05.044] [Citation(s) in RCA: 80] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/03/2011] [Accepted: 05/12/2011] [Indexed: 10/18/2022]
|
70
|
Vernerey FJ, Greenwald EC, Bryant SJ. Triphasic mixture model of cell-mediated enzymatic degradation of hydrogels. Comput Methods Biomech Biomed Engin 2011; 15:1197-210. [PMID: 21809945 DOI: 10.1080/10255842.2011.585973] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
Abstract
One critical component of engineering living tissue equivalents is the design scaffolds (often made of hydrogels) whose degradation kinetics can match that of matrix production by cells. However, cell-mediated enzymatic degradation of a hydrogel is a highly complex and nonlinear process that is challenging to comprehend based solely on experimental observations. To address this issue, this study presents a triphasic mixture model of the enzyme-hydrogel system, which consists of a solid polymer network, water and enzyme. On the basis mixture theory, the rubber elasticity theory and the Michaelis-Menton kinetics for degradation, the model naturally incorporates a strong coupling between gel mechanical properties, the kinetics of degradation and the transport of enzyme through the gel. The model is then used to investigate the particular problem of a single spherical enzyme-producing cell, embedded in a spherical hydrogel domain, for which the governing equations can be cast within the cento-symmetric assumptions. The governing equations are subsequently solved using an implicit nonlinear finite element procedure to obtain the evolution of enzyme concentration and gel degradation through time and space. The model shows that two regimes of degradation behaviour exist, whereby degradation is dominated either by diffusion or dominated by reaction kinetics. Depending on the enzyme properties and the initial hydrogel design, the temporal and spatial changes in gel cross-linking are dramatically impacted, a feature that is likely to strongly affect new tissue development.
Collapse
Affiliation(s)
- Franck J Vernerey
- Department of Civil, Environmental and Architectural Engineering, University of Colorado, Boulder, CO, USA.
| | | | | |
Collapse
|
71
|
Porter AM, Klinge CM, Gobin AS. Covalently grafted VEGF(165) in hydrogel models upregulates the cellular pathways associated with angiogenesis. Am J Physiol Cell Physiol 2011; 301:C1086-92. [PMID: 21795519 DOI: 10.1152/ajpcell.00090.2011] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
Abstract
Angiogenesis is an important biological response known to be involved in many physiological and pathophysiological situations. Cellular responses involved in the formation of new blood vessels, such as increases in endothelial cell proliferation, cell migration, and the survival of apoptosis-inducing events, have been associated with vascular endothelial growth factor isoform 165 (VEGF(165)). Current research in the areas of bioengineering and biomedical science has focused on developing polyethylene glycol (PEG)-based systems capable of initiating and sustaining angiogenesis in vitro. However, a thorough understanding of how endothelial cells respond at the molecular level to VEGF(165) incorporated into these systems has not yet been established in the literature. The goal of the current study was to compare the upregulation of key intracellular proteins involved in angiogenesis in human umbilical vein endothelial cells (HUVEC) and human microvascular endothelial cells (HMEC) seeded on PEG hydrogels containing grafted VEGF(165) and adhesion peptides Arg-Gly-Asp-Ser (RGDS). Our data suggest that the covalent incorporation of VEGF(165) into PEG hydrogels encourages the upregulation of signaling proteins responsible for increases in endothelial cell proliferation, cell migration, and the survival after apoptosis-inducing events.
Collapse
Affiliation(s)
- A M Porter
- Physiology and Biophysics, University of Louisville, Louisville, KY 40292, USA
| | | | | |
Collapse
|
72
|
Singelyn JM, Christman KL. Modulation of material properties of a decellularized myocardial matrix scaffold. Macromol Biosci 2011; 11:731-8. [PMID: 21322109 PMCID: PMC3280095 DOI: 10.1002/mabi.201000423] [Citation(s) in RCA: 66] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2010] [Revised: 12/14/2010] [Indexed: 01/07/2023]
Abstract
Injectable materials offer the potential for minimally invasive therapy for myocardial infarction (MI), either as an acellular scaffold or as a cell delivery vehicle. A recently developed myocardial matrix hydrogel, derived from decellularized porcine ventricular tissue, has the potential to aid in cardiac repair following an MI. Herein, we set out to study the effects of cross-linking on the cardiac hydrogel stiffness, degradation properties, cellular migration, and catheter injectability in vitro. Cross-linking increased stiffness, while slowing degradation and cellular migration through the gels. Additionally, the cross-linked material was pushed through a clinically relevant catheter. These results demonstrate that the material properties of myocardial matrix can be tuned via cross-linking, while maintaining appropriate viscosity for catheter injectability.
Collapse
Affiliation(s)
- Jennifer M Singelyn
- Department of Bioengineering, University of California, San Diego, La Jolla, California 92093, USA
| | | |
Collapse
|
73
|
Choudhury D, Mo X, Iliescu C, Tan LL, Tong WH, Yu H. Exploitation of physical and chemical constraints for three-dimensional microtissue construction in microfluidics. BIOMICROFLUIDICS 2011; 5:22203. [PMID: 21799710 PMCID: PMC3145229 DOI: 10.1063/1.3593407] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2011] [Accepted: 05/02/2011] [Indexed: 05/06/2023]
Abstract
There are a plethora of approaches to construct microtissues as building blocks for the repair and regeneration of larger and complex tissues. Here we focus on various physical and chemical trapping methods for engineering three-dimensional microtissue constructs in microfluidic systems that recapitulate the in vivo tissue microstructures and functions. Advances in these in vitro tissue models have enabled various applications, including drug screening, disease or injury models, and cell-based biosensors. The future would see strides toward the mesoscale control of even finer tissue microstructures and the scaling of various designs for high throughput applications. These tools and knowledge will establish the foundation for precision engineering of complex tissues of the internal organs for biomedical applications.
Collapse
|
74
|
Leslie-Barbick JE, Saik JE, Gould DJ, Dickinson ME, West JL. The promotion of microvasculature formation in poly(ethylene glycol) diacrylate hydrogels by an immobilized VEGF-mimetic peptide. Biomaterials 2011; 32:5782-9. [PMID: 21612821 DOI: 10.1016/j.biomaterials.2011.04.060] [Citation(s) in RCA: 122] [Impact Index Per Article: 9.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/08/2011] [Accepted: 04/22/2011] [Indexed: 01/15/2023]
Abstract
Microvascularization of tissue engineered constructs was achieved by utilizing a VEGF-mimicking peptide, QK, covalently bound to a poly(ethylene glycol) hydrogel matrix. The 15-amino acid peptide, developed by D'Andrea et al., was modified with a PEG-succinimidyl ester linker on the N-terminus of the peptide, then photocrosslinked onto the surface or throughout PEG hydrogels. PEGylation of the peptide increased its solubility and bioactivity, as evidenced by endothelial cell proliferation. PEG-QK showed equal or superior ability to promote angiogenesis in vitro, on the surface of hydrogels and within three-dimensional collagenase-degradable hydrogels, compared to RGDS only or PEG-VEGF hydrogels. Endothelial cells were shown to form tubule structures, migrate, and make cell-cell contacts in response to covalently-bound PEG-QK. In vivo in a mouse cornea micropocket angiogenesis assay, PEG-QK hydrogels promoted more complete coverage of host microvasculature within the hydrogel. PEG-QK was shown to enhance vessel branch points and vessel density as well as space filling properties of fractal dimension and lacunarity. This report shows the ability to promote angiogenesis in tissue engineered constructs using a covalently-bound small peptide rather than a large protein and may point to an advance in designing biomimetic cellular environments.
Collapse
|
75
|
Controlled activation of morphogenesis to generate a functional human microvasculature in a synthetic matrix. Blood 2011; 118:804-15. [PMID: 21527523 DOI: 10.1182/blood-2010-12-327338] [Citation(s) in RCA: 138] [Impact Index Per Article: 10.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
Abstract
Understanding the role of the extracellular matrix (ECM) in vascular morphogenesis has been possible using natural ECMs as in vitro models to study the underlying molecular mechanisms. However, little is known about vascular morphogenesis in synthetic matrices where properties can be tuned toward both the basic understanding of tubulogenesis in modular environments and as a clinically relevant alternative to natural materials for regenerative medicine. We investigated synthetic, tunable hyaluronic acid (HA) hydrogels and determined both the adhesion and degradation parameters that enable human endothelial colony-forming cells (ECFCs) to form efficient vascular networks. Entrapped ECFCs underwent tubulogenesis dependent on the cellular interactions with the HA hydrogel during each stage of vascular morphogenesis. Vacuole and lumen formed through integrins α(5)β(1) and α(V)β(3), while branching and sprouting were enabled by HA hydrogel degradation. Vascular networks formed within HA hydrogels containing ECFCs anastomosed with the host's circulation and supported blood flow in the hydrogel after transplantation. Collectively, we show that the signaling pathways of vascular morphogenesis of ECFCs can be precisely regulated in a synthetic matrix, resulting in a functional microvasculature useful for the study of 3-dimensional vascular biology and toward a range of vascular disorders and approaches in tissue regeneration.
Collapse
|
76
|
Ehrbar M, Sala A, Lienemann P, Ranga A, Mosiewicz K, Bittermann A, Rizzi SC, Weber FE, Lutolf MP. Elucidating the role of matrix stiffness in 3D cell migration and remodeling. Biophys J 2011; 100:284-93. [PMID: 21244824 DOI: 10.1016/j.bpj.2010.11.082] [Citation(s) in RCA: 242] [Impact Index Per Article: 18.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/29/2010] [Revised: 11/02/2010] [Accepted: 11/16/2010] [Indexed: 12/30/2022] Open
Abstract
Reductionist in vitro model systems which mimic specific extracellular matrix functions in a highly controlled manner, termed artificial extracellular matrices (aECM), have increasingly been used to elucidate the role of cell-ECM interactions in regulating cell fate. To better understand the interplay of biophysical and biochemical effectors in controlling three-dimensional cell migration, a poly(ethylene glycol)-based aECM platform was used in this study to explore the influence of matrix cross-linking density, represented here by stiffness, on cell migration in vitro and in vivo. In vitro, the migration behavior of single preosteoblastic cells within hydrogels of varying stiffness and susceptibilities to degradation by matrix metalloproteases was assessed by time-lapse microscopy. Migration behavior was seen to be strongly dependent on matrix stiffness, with two regimes identified: a nonproteolytic migration mode dominating at relatively low matrix stiffness and proteolytic migration at higher stiffness. Subsequent in vivo experiments revealed a similar stiffness dependence of matrix remodeling, albeit less sensitive to the matrix metalloprotease sensitivity. Therefore, our aECM model system is well suited to unveil the role of biophysical and biochemical determinants of physiologically relevant cell migration phenomena.
Collapse
Affiliation(s)
- M Ehrbar
- Department of Cranio-Maxillofacial Surgery, University Hospital Zurich, Switzerland.
| | | | | | | | | | | | | | | | | |
Collapse
|
77
|
Nguyen EH, Schwartz MP, Murphy WL. Biomimetic approaches to control soluble concentration gradients in biomaterials. Macromol Biosci 2011; 11:483-92. [PMID: 21265021 PMCID: PMC3735129 DOI: 10.1002/mabi.201000448] [Citation(s) in RCA: 33] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2010] [Revised: 12/29/2010] [Indexed: 01/20/2023]
Abstract
Soluble concentration gradients play a critical role in controlling tissue formation during embryonic development. The importance of soluble signaling in biology has motivated engineers to design systems that allow precise and quantitative manipulation of gradient formation in vitro. Engineering techniques have increasingly moved to the third dimension in order to provide more physiologically relevant models to study the biological role of gradient formation and to guide strategies for controlling new tissue formation for therapeutic applications. This review provides an overview of efforts to design biomimetic strategies for soluble gradient formation, with a focus on microfluidic techniques and biomaterials approaches for moving gradient generation to the third dimension.
Collapse
Affiliation(s)
- Eric H. Nguyen
- Department of Biomedical Engineering, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, Wisconsin 53705, USA
| | - Michael P. Schwartz
- Department of Biomedical Engineering, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, Wisconsin 53705, USA
| | - William L. Murphy
- Department of Biomedical Engineering, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, Wisconsin 53705, USA, Fax: (608) 265 9239. Department of Pharmacology, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, Wisconsin 53705, USA. Department of Orthopedics & Rehabilitation, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, Wisconsin 53705, USA
| |
Collapse
|
78
|
Burdick JA, Prestwich GD. Hyaluronic acid hydrogels for biomedical applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2011; 23:H41-56. [PMID: 21394792 PMCID: PMC3730855 DOI: 10.1002/adma.201003963] [Citation(s) in RCA: 1289] [Impact Index Per Article: 99.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2010] [Revised: 01/03/2011] [Indexed: 05/10/2023]
Abstract
Hyaluronic acid (HA), an immunoneutral polysaccharide that is ubiquitous in the human body, is crucial for many cellular and tissue functions and has been in clinical use for over thirty years. When chemically modified, HA can be transformed into many physical forms-viscoelastic solutions, soft or stiff hydrogels, electrospun fibers, non-woven meshes, macroporous and fibrillar sponges, flexible sheets, and nanoparticulate fluids-for use in a range of preclinical and clinical settings. Many of these forms are derived from the chemical crosslinking of pendant reactive groups by addition/condensation chemistry or by radical polymerization. Clinical products for cell therapy and regenerative medicine require crosslinking chemistry that is compatible with the encapsulation of cells and injection into tissues. Moreover, an injectable clinical biomaterial must meet marketing, regulatory, and financial constraints to provide affordable products that can be approved, deployed to the clinic, and used by physicians. Many HA-derived hydrogels meet these criteria, and can deliver cells and therapeutic agents for tissue repair and regeneration. This progress report covers both basic concepts and recent advances in the development of HA-based hydrogels for biomedical applications.
Collapse
Affiliation(s)
- Jason A. Burdick
- Prof. J.A. Burdick, Department of Bioengineering, University of Pennsylvania, 210 S 33th Street, Philadelphia, PA 19104 (USA),
| | - Glenn D. Prestwich
- Prof. G.D. Prestwich, Department of Medicinal Chemistry and Center for Therapeutic Biomaterials, University of Utah, 419 Wakara Way, Suite 205, Salt Lake City, UT 84108 (USA),
| |
Collapse
|
79
|
Porter AM, Klinge CM, Gobin AS. Biomimetic hydrogels with VEGF induce angiogenic processes in both hUVEC and hMEC. Biomacromolecules 2010; 12:242-6. [PMID: 21128597 DOI: 10.1021/bm101220b] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Angiogenesis is the process by which new blood vessels arise from the pre-existing vasculature. Human endothelial cells are known to be involved in three key cellular processes during angiogenesis: increased cell proliferation, degradation of the extracellular matrix during cell migration, and the survival of apoptosis. The above processes depend upon the presence of growth factors, such as vascular endothelial growth factor isoform 165 (VEGF(165)) that is released from the extracellular matrix as it is being degraded or secreted from activated endothelial cells. Thus, the goal of the current study is to develop a system with a backbone of polyethylene glycol (PEG) and grafted angiogenic signals to compare the initial angiogenic response of human umbilical vein endothelial cells (hUVEC) or human microvascular endothelial cells (hMEC). Adhesion ligands (PEG-RGDS) for cell attachment and PEG-modified VEGF(165) (PEG-VEGF(165)) are grafted into the hydrogels to encourage the angiogenic response. Our data suggest that our biomimetic system is equally effective in stimulating proliferation, migration, and survival of apoptosis in hMEC as compared to the response to hUVEC.
Collapse
Affiliation(s)
- Alex M Porter
- Physiology and Biophysics, University of Louisville, Louisville, Kentucky 40292, United States
| | | | | |
Collapse
|
80
|
Blit PH, Shen YH, Ernsting MJ, Woodhouse KA, Santerre JP. Bioactivation of porous polyurethane scaffolds using fluorinated RGD surface modifiers. J Biomed Mater Res A 2010; 94:1226-35. [PMID: 20694989 DOI: 10.1002/jbm.a.32804] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Biomaterial scaffolds for tissue engineering require appropriate cell adhesion, proliferation, and infiltration into their three-dimensional (3D) porous structures. Surface modification techniques have the potential to enhance cell infiltration into synthetic scaffolds while retaining bulk material properties intact. The objective of this work was to assess the potential of achieving a uniform surface modification in 3D porous constructs through the blending of surface-modifying additives known as bioactive fluorinated surface modifiers (BFSMs) with a base polyurethane material. By coupling RGD peptides to the fluorinated surface modifiers to form RGD-BFSMs, the BFSMs can act as a vehicle for the delivery of RGD moieties to the surface without direct covalent attachment to the polymer substrate. Fluorescent RGD-BFSMs were shown to migrate to the polymer-air interfaces within the porous scaffolds by two-photon confocal microscopy. A-10 rat aortic smooth muscle cells were cultured for 4 weeks on nonmodified and RGD-BFSM-modified porous scaffolds, and cell adhesion, proliferation, and viability were quantified at different depths. RGD-BFSM-modified scaffolds showed significantly greater cell numbers within deeper regions of the scaffolds, and this difference became more pronounced over time. This study demonstrates an effective approach to promote cell adhesion and infiltration within thick (approximately 0.5 cm) porous synthetic scaffolds by providing a uniform distribution of adhesive peptide throughout the scaffolds without the use of covalent surface reaction chemistry.
Collapse
Affiliation(s)
- Patrick H Blit
- Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario, Canada
| | | | | | | | | |
Collapse
|
81
|
Bott K, Upton Z, Schrobback K, Ehrbar M, Hubbell JA, Lutolf MP, Rizzi SC. The effect of matrix characteristics on fibroblast proliferation in 3D gels. Biomaterials 2010; 31:8454-64. [DOI: 10.1016/j.biomaterials.2010.07.046] [Citation(s) in RCA: 212] [Impact Index Per Article: 15.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2010] [Accepted: 07/08/2010] [Indexed: 12/22/2022]
|
82
|
Pradhan S, Farach-Carson MC. Mining the extracellular matrix for tissue engineering applications. Regen Med 2010; 5:961-70. [DOI: 10.2217/rme.10.61] [Citation(s) in RCA: 47] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
Abstract
Tissue engineering is a rapidly evolving interdisciplinary field that aims to regenerate new tissue to replace damaged tissues or organs. The extracellular matrix (ECM) of animal tissues is a complex mixture of macromolecules that play an essential instructional role in the development of tissues and organs. Therefore, tissue engineering approaches rely on the need to present the correct cues to cells, to guide them to maintain tissue-specific functions. Recent research efforts have allowed us to mine various sequences and motifs, which play key roles in these guidance functions, from the ECM. Small conserved peptide sequences mined from ECM molecules can mimic some of the biological functions of their large parent molecules. In addition, these peptide sequences can be linked to various biomaterial scaffolds that can provide the cells with mechanical support to ensure appropriate cell growth and aid the formation of the correct tissue structure. The tissue engineering field will continue to benefit from the advent of these mined ECM sequences which have two major advantages over recombinant ECM molecules: material consistency and scalability.
Collapse
Affiliation(s)
- Swati Pradhan
- Department of Biological Sciences, University of Delaware, Newark, DE 19716, USA Biochemistry & Cell Biology, Rice University, Houston, TX 77251-1892, USA
- Center for Translational Cancer Research (CTCR), University of Delaware, Newark, DE 19716, USA
| | | |
Collapse
|
83
|
Choi CK, Breckenridge MT, Chen CS. Engineered materials and the cellular microenvironment: a strengthening interface between cell biology and bioengineering. Trends Cell Biol 2010; 20:705-14. [PMID: 20965727 DOI: 10.1016/j.tcb.2010.09.007] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2010] [Revised: 09/09/2010] [Accepted: 09/10/2010] [Indexed: 12/26/2022]
Abstract
Cells constantly probe and respond to a myriad of cues that are present in their local surroundings. The effects of soluble cues are relatively straightforward to manipulate, yet teasing apart how cells transduce signals from the extracellular matrix and neighboring cells has proven to be challenging due to the spatially and mechanically complex adhesive interactions. Over the years, advances in the engineering of biocompatible materials have enabled innovative ways to study adhesion-mediated cell functions, and numerous insights have elucidated the significance of the cellular microenvironment. Here, we highlight some of the major approaches and discuss the potential for future advancement.
Collapse
Affiliation(s)
- Colin K Choi
- Department of Bioengineering, University of Pennsylvania, Philadelphia, PA 19104, USA
| | | | | |
Collapse
|
84
|
Lei Y, Gojgini S, Lam J, Segura T. The spreading, migration and proliferation of mouse mesenchymal stem cells cultured inside hyaluronic acid hydrogels. Biomaterials 2010; 32:39-47. [PMID: 20933268 DOI: 10.1016/j.biomaterials.2010.08.103] [Citation(s) in RCA: 206] [Impact Index Per Article: 14.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2010] [Accepted: 08/29/2010] [Indexed: 11/26/2022]
Abstract
Synthetic hydrogel scaffolds that can be used as culture systems that mimic the natural stem cell niche are of increased importance for stem cell biology and regenerative medicine. These artificial niches can be utilized to control the stem cell fate and will have potential applications for expanding/differentiating stem cells in vitro, delivering stem cells in vivo, as well as making tissue constructs. In this study, we synthesized hyaluronic acid (HA) hydrogels that could be degraded through a combination of cell-released enzymes and used them to culture mouse mesenchymal stem cells (mMSC). To form the hydrogels, HA was modified to contain acrylate groups and crosslinked through Michael addition chemistry using non-degradable, plasmin degradable or matrix metalloproteinase (MMP) degradable crosslinkers. Using this hydrogel we found that mMSC proliferation occurred in the absence of cell spreading, that mMSCs could only spread when both RGD and MMP degradation sites were present in the hydrogel and that mMSCs in hydrogels with high density of RGD (1000 μm) spread and migrated faster and more extensively than in hydrogels with low density of RGD (100 μm).
Collapse
Affiliation(s)
- Yuguo Lei
- University of California, Los Angeles, Chemical and Biomolecular Engineering Department, Los Angeles, CA, USA
| | | | | | | |
Collapse
|
85
|
Parrag IC, Woodhouse KA. Development of biodegradable polyurethane scaffolds using amino acid and dipeptide-based chain extenders for soft tissue engineering. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2010; 21:843-62. [PMID: 20482988 DOI: 10.1163/156856209x446743] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
The inherent flexibility of polyurethane (PU) chemistry allows the incorporation of specific chemical moieties into the backbone structure conferring a unique biological function to these synthetic polymers. We describe here the synthesis and characterization of a PU containing a Gly-Leu linkage, the cleavage site of several matrix metalloproteinases. A Gly-Leu dipeptide was introduced into the chain extender of the polyurethane through the reaction with 1,4-cyclohexane dimethanol. PUs synthesized with the Gly-Leu-based chain extender had a high weight-average molecular weight (M(w) > 125 x 10(3)) and were phase segregated, semi-crystalline polymers with a low soft-segment glass-transition temperature (T(g) < -50 degrees C). Uniaxial tensile testing of PU films indicated that the polymer could withstand high ultimate tensile strengths (approx. 13 MPa) and were flexible with breaking strains of approx. 900%. The Gly-Leu PU had a significantly higher initial modulus, yield stress and ultimate stress compared to a PU previously developed in our laboratory containing a phenylalanine-based chain extender (Phe PU). The Gly-Leu-based chain extender allowed for better hard segment packing and hydrogen bonding leading to enhanced mechanical properties. Electrospinning was used to form scaffolds with randomly organized fibers and an average fiber diameter of approx. 3.6 mum for both the Gly-Leu and Phe PUs. Mouse embryonic fibroblasts were successfully cultured on the PU scaffolds out to 28 days. Further investigations into cell-mediated polymer degradation will help to identify the suitability of this new biomaterial as scaffolds for soft tissue applications.
Collapse
Affiliation(s)
- Ian C Parrag
- Department of Chemical Engineering & Applied Chemistry, University of Toronto, 200 College Street, Toronto, ON, Canada M5V 3E5
| | | |
Collapse
|
86
|
DeForest CA, Sims EA, Anseth KS. Peptide-Functionalized Click Hydrogels with Independently Tunable Mechanics and Chemical Functionality for 3D Cell Culture. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2010; 22:4783-4790. [PMID: 20842213 PMCID: PMC2937999 DOI: 10.1021/cm101391y] [Citation(s) in RCA: 135] [Impact Index Per Article: 9.6] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2010] [Revised: 07/09/2010] [Indexed: 05/21/2023]
Abstract
Multifunctionalized macromers react via a copper-free click chemistry to form an idealized 3D hydrogel. Subsequently, thiol-containing biomolecules are spatially patterned within the material with precise control over the amount and location of functionalization. Both the network formation and subsequent patterning reactions are fully cytocompatible, allowing these systems to be used to study individual cell behavior at user-defined locations throughout the material.
Collapse
Affiliation(s)
| | - Evan A. Sims
- Department of Chemical and Biological Engineering
| | - Kristi S. Anseth
- Department of Chemical and Biological Engineering
- the Howard Hughes Medical Institute
- Corresponding author. E-mail:
| |
Collapse
|
87
|
Romano NH, Sengupta D, Chung C, Heilshorn SC. Protein-engineered biomaterials: nanoscale mimics of the extracellular matrix. Biochim Biophys Acta Gen Subj 2010; 1810:339-49. [PMID: 20647034 DOI: 10.1016/j.bbagen.2010.07.005] [Citation(s) in RCA: 83] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2009] [Revised: 07/07/2010] [Accepted: 07/09/2010] [Indexed: 11/29/2022]
Abstract
BACKGROUND Traditional materials used as in vitro cell culture substrates are rigid and flat surfaces that lack the exquisite nano- and micro-scale features of the in vivo extracellular environment. While these surfaces can be coated with harvested extracellular matrix (ECM) proteins to partially recapitulate the bio-instructive nature of the ECM, these harvested proteins often exhibit large batch-to-batch variability and can be difficult to customize for specific biological studies. In contrast, recombinant protein technology can be utilized to synthesize families of 3 dimensional protein-engineered biomaterials that are cyto-compatible, reproducible, and fully customizable. SCOPE OF REVIEW Here we describe a modular design strategy to synthesize protein-engineered biomaterials that fuse together multiple repeats of nanoscale peptide design motifs into full-length engineered ECM mimics. MAJOR CONCLUSIONS Due to the molecular-level precision of recombinant protein synthesis, these biomaterials can be tailored to include a variety of bio-instructional ligands at specified densities, to exhibit mechanical properties that match those of native tissue, and to include proteolytic target sites that enable cell-triggered scaffold remodeling. Furthermore, these biomaterials can be processed into forms that are injectable for minimally-invasive delivery or spatially patterned to enable the release of multiple drugs with distinct release kinetics. GENERAL SIGNIFICANCE Given the reproducibility and flexibility of these protein-engineered biomaterials, they are ideal substrates for reductionist biological studies of cell-matrix interactions, for in vitro models of physiological processes, and for bio-instructive scaffolds in regenerative medicine therapies. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.
Collapse
Affiliation(s)
- Nicole H Romano
- Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305-4045, USA
| | | | | | | |
Collapse
|
88
|
Nichol JW, Koshy ST, Bae H, Hwang CM, Yamanlar S, Khademhosseini A. Cell-laden microengineered gelatin methacrylate hydrogels. Biomaterials 2010; 31:5536-44. [PMID: 20417964 DOI: 10.1016/j.biomaterials.2010.03.064] [Citation(s) in RCA: 1518] [Impact Index Per Article: 108.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2010] [Accepted: 03/25/2010] [Indexed: 10/19/2022]
Abstract
The cellular microenvironment plays an integral role in improving the function of microengineered tissues. Control of the microarchitecture in engineered tissues can be achieved through photopatterning of cell-laden hydrogels. However, despite high pattern fidelity of photopolymerizable hydrogels, many such materials are not cell-responsive and have limited biodegradability. Here, we demonstrate gelatin methacrylate (GelMA) as an inexpensive, cell-responsive hydrogel platform for creating cell-laden microtissues and microfluidic devices. Cells readily bound to, proliferated, elongated, and migrated both when seeded on micropatterned GelMA substrates as well as when encapsulated in microfabricated GelMA hydrogels. The hydration and mechanical properties of GelMA were demonstrated to be tunable for various applications through modification of the methacrylation degree and gel concentration. The pattern fidelity and resolution of GelMA were high and it could be patterned to create perfusable microfluidic channels. Furthermore, GelMA micropatterns could be used to create cellular micropatterns for in vitro cell studies or 3D microtissue fabrication. These data suggest that GelMA hydrogels could be useful for creating complex, cell-responsive microtissues, such as endothelialized microvasculature, or for other applications that require cell-responsive microengineered hydrogels.
Collapse
Affiliation(s)
- Jason W Nichol
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
| | | | | | | | | | | |
Collapse
|
89
|
Zamanian B, Masaeli M, Nichol JW, Khabiry M, Hancock MJ, Bae H, Khademhosseini A. Interface-directed self-assembly of cell-laden microgels. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2010; 6:937-44. [PMID: 20358531 PMCID: PMC2858261 DOI: 10.1002/smll.200902326] [Citation(s) in RCA: 83] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/14/2023]
Abstract
Cell-laden hydrogels show great promise for creating engineered tissues. However, a major shortcoming with these systems has been the inability to fabricate structures with controlled micrometer-scale features on a biologically relevant length scale. In this Full Paper, a rapid method is demonstrated for creating centimeter-scale, cell-laden hydrogels through the assembly of shape-controlled microgels or a liquid-air interface. Cell-laden microgels of specific shapes are randomly placed on the surface of a high-density, hydrophobic solution, induced to aggregate and then crosslinked into macroscale tissue-like structures. The resulting assemblies are cell-laden hydrogel sheets consisting of tightly packed, ordered microgel units. In addition, a hierarchical approach creates complex multigel building blocks, which are then assembled into tissues with precise spatial control over the cell distribution. The results demonstrate that forces at an air-liquid interface can be used to self-assemble spatially controllable, cocultured tissue-like structures.
Collapse
Affiliation(s)
- Behnam Zamanian
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Mahdokht Masaeli
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
- Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, USA
| | - Jason W. Nichol
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Masoud Khabiry
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Matthew J. Hancock
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Hojae Bae
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Ali Khademhosseini
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, 65 Landsdowne Street, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| |
Collapse
|
90
|
Miller JS, Shen CJ, Legant WR, Baranski JD, Blakely BL, Chen CS. Bioactive hydrogels made from step-growth derived PEG-peptide macromers. Biomaterials 2010; 31:3736-43. [PMID: 20138664 DOI: 10.1016/j.biomaterials.2010.01.058] [Citation(s) in RCA: 151] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2009] [Accepted: 01/12/2010] [Indexed: 01/06/2023]
Abstract
Synthetic hydrogels based on poly(ethylene glycol) (PEG) have been used as biomaterials for cell biology and tissue engineering investigations. Bioactive PEG-based gels have largely relied on heterobifunctional or multi-arm PEG precursors that can be difficult to synthesize and characterize or expensive to obtain. Here, we report an alternative strategy, which instead uses inexpensive and readily available PEG precursors to simplify reactant sourcing. This new approach provides a robust system in which to probe cellular interactions with the microenvironment. We used the step-growth polymerization of PEG diacrylate (PEGDA, 3400Da) with bis-cysteine matrix metalloproteinase (MMP)-sensitive peptides via Michael-type addition to form biodegradable photoactive macromers of the form acrylate-PEG-(peptide-PEG)(m)-acrylate. The molecular weight (MW) of these macromers is controlled by the stoichiometry of the reaction, with a high proportion of resultant macromer species greater than 500kDa. In addition, the polydispersity of these materials was nearly identical for three different MMP-sensitive peptide sequences subjected to the same reaction conditions. When photopolymerized into hydrogels, these high MW materials exhibit increased swelling and sensitivity to collagenase-mediated degradation as compared to previously published PEG hydrogel systems. Cell-adhesive acrylate-PEG-CGRGDS was synthesized similarly and its immobilization and stability in solid hydrogels was characterized with a modified Lowry assay. To illustrate the functional utility of this approach in a biological setting, we applied this system to develop materials that promote angiogenesis in an ex vivo aortic arch explant assay. We demonstrate the formation and invasion of new sprouts mediated by endothelial cells into the hydrogels from embedded embryonic chick aortic arches. Furthermore, we show that this capillary sprouting and three-dimensional migration of endothelial cells can be tuned by engineering the MMP-susceptibility of the hydrogels and the presence of functional immobilized adhesive ligands (CGRGDS vs. CGRGES peptide). The facile chemistry described and significant cellular responses observed suggest the usefulness of these materials in a variety of in vitro and ex vivo biologic investigations, and may aid in the design or refinement of material systems for a range of tissue engineering approaches.
Collapse
Affiliation(s)
- Jordan S Miller
- Department of Bioengineering, University of Pennsylvania, 210 S. 33rd St., 510 Skirkanich Hall, Philadelphia, PA 19104, USA
| | | | | | | | | | | |
Collapse
|
91
|
Haque MA, Nagaoka M, Hexig B, Akaike T. Artificial extracellular matrix for embryonic stem cell cultures: a new frontier of nanobiomaterials. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2010; 11:014106. [PMID: 27877321 PMCID: PMC5090548 DOI: 10.1088/1468-6996/11/1/014106] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/09/2010] [Revised: 02/26/2010] [Accepted: 02/02/2010] [Indexed: 06/06/2023]
Abstract
Nanobiomaterials can play a central role in regenerative medicine and tissue engineering by facilitating cellular behavior and function, such as those where extracellular matrices (ECMs) direct embryonic stem (ES) cell morphogenesis, proliferation, differentiation and apoptosis. However, controlling ES cell proliferation and differentiation using matrices from natural sources is still challenging due to complex and heterogeneous culture conditions. Moreover, the systemic investigation of the regulation of self-renewal and differentiation to lineage specific cells depends on the use of defined and stress-free culture conditions. Both goals can be achieved by the development of biomaterial design targeting ECM or growth factors for ES cell culture. This targeted application will benefit from expansion of ES cells for transplantation, as well as the production of a specific differentiated cell type either by controlling the differentiation in a very specific pathway or by elimination of undesirable cell types.
Collapse
Affiliation(s)
- Md Amranul Haque
- Department of Biomolecular Engineering, Gaduate School of Bioscience and Biotechnology, Tokyo Institute of Technology, 226-8501 Yokohama, Japan
| | - Masato Nagaoka
- Department of Biomolecular Engineering, Gaduate School of Bioscience and Biotechnology, Tokyo Institute of Technology, 226-8501 Yokohama, Japan
- Department of Cell Biology, Neurobiology and Anatomy, Medical College of Wisconsin, Milwaukee, WI 53226, USA
| | - Bayar Hexig
- Department of Biomolecular Engineering, Gaduate School of Bioscience and Biotechnology, Tokyo Institute of Technology, 226-8501 Yokohama, Japan
| | - Toshihiro Akaike
- Department of Biomolecular Engineering, Gaduate School of Bioscience and Biotechnology, Tokyo Institute of Technology, 226-8501 Yokohama, Japan
| |
Collapse
|
92
|
Cheung YK, Azeloglu EU, Shiovitz DA, Costa KD, Seliktar D, Sia SK. Microscale control of stiffness in a cell-adhesive substrate using microfluidics-based lithography. Angew Chem Int Ed Engl 2010; 48:7188-92. [PMID: 19479917 DOI: 10.1002/anie.200900807] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Yuk Kee Cheung
- Department of Biomedical Engineering, Columbia University, 1210 Amsterdam Ave, New York, NY 10027, USA
| | | | | | | | | | | |
Collapse
|
93
|
Abstract
Therapeutic vascularization remains a significant challenge in regenerative medicine applications. Whether the goal is to induce vascular growth in ischemic tissue or scale up tissue-engineered constructs, the ability to induce the growth of patent, stable vasculature is a critical obstacle. We engineered polyethylene glycol-based bioartificial hydrogel matrices presenting protease-degradable sites, cell-adhesion motifs, and growth factors to induce the growth of vasculature in vivo. Compared to injection of soluble VEGF, these matrices delivered sustained in vivo levels of VEGF over 2 weeks as the matrix degraded. When implanted subcutaneously in rats, degradable constructs containing VEGF and arginine-glycine-aspartic acid tripeptide induced a significant number of vessels to grow into the implant at 2 weeks with increasing vessel density at 4 weeks. The mechanism of enhanced vascularization is likely cell-demanded release of VEGF, as the hydrogels may degrade substantially within 2 weeks. In a mouse model of hind-limb ischemia, delivery of these matrices resulted in significantly increased rate of reperfusion. These results support the application of engineered bioartificial matrices to promote vascularization for directed regenerative therapies.
Collapse
|
94
|
Micro- and nanotechnologies for intelligent and responsive biomaterial-based medical systems. Adv Drug Deliv Rev 2009; 61:1391-401. [PMID: 19758574 DOI: 10.1016/j.addr.2009.09.002] [Citation(s) in RCA: 174] [Impact Index Per Article: 11.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2009] [Revised: 08/29/2009] [Accepted: 09/04/2009] [Indexed: 12/12/2022]
Abstract
Advances in medical treatments of a wide variety of pathophysiological conditions require the development of better therapeutic agents, as well as a combination of the required therapeutic agents with device-integrated biomaterials that can serve as sensors and carriers. Combination of micro- and nano-fabricated systems with intelligent biomaterials that have the ability to sense and respond is a promising avenue for the development of better diagnostic and therapeutic medical systems. Micro- and nano-electromechanical systems (MEMs and NEMs) are now becoming a family of potentially powerful new technologies for drug delivery, diagnostic tools, and tissue engineering. Improvements in micro- and nano-fabrication technologies have enhanced the ability to create better performing therapeutic systems for numerous pathophysiological applications. More importantly, MEMS- and NEMS-based tissue regeneration scaffolds, biosensors, and drug delivery devices provide new opportunities to mimic the natural intelligence and response of biological systems.
Collapse
|
95
|
Leslie-Barbick JE, Moon JJ, West JL. Covalently-immobilized vascular endothelial growth factor promotes endothelial cell tubulogenesis in poly(ethylene glycol) diacrylate hydrogels. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2009; 20:1763-79. [PMID: 19723440 DOI: 10.1163/156856208x386381] [Citation(s) in RCA: 142] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
The development and use of functional tissue-engineered products is currently limited by the challenge of incorporating microvasculature. To this end, we have investigated strategies to facilitate vascularization in scaffold materials, in this case poly(ethylene glycol) (PEG) hydrogels. These hydrogels are hydrophilic and resist protein adsorption and subsequent non-specific cell adhesion, but can be modified to contain cell-adhesive ligands and growth factors to support cell and tissue function. Additionally, the hydrogel matrix can include proteolytically degradable peptide sequences in the backbone of the structure to allow cells to control scaffold biodegradation, allowing three-dimensional migration. Vascular endothelial growth factor (VEGF), a potent angiogenic signal, and the cell-adhesive peptide RGDS were each covalently attached to PEG monoacrylate linkers. PEGylated RGDS and VEGF were then covalently immobilized in PEG-diacrylate (PEGDA) hydrogels in 2D and 3D. Immobilized VEGF increased endothelial cell tubulogenesis on the surface of non-degradable PEGDA hydrogels 4-fold compared to controls without the growth factor. Endothelial cell behavior in 3D collagenase-degradable hydrogels modified with RGDS and VEGF was observed using time-lapse confocal microscopy. Bulk immobilization of VEGF in 3D collagenase-degradable RGDS-modified hydrogels increased endothelial cell motility 14-fold and cell-cell connections 3-fold. Covalent incorporation of PEGylated VEGF in PEG hydrogels can be a useful tool to promote endothelial cell migration, cell-cell contact formation and tubulogenesis in an effort to produce vascularized tissue-engineered constructs.
Collapse
|
96
|
Liu B, Lewis AK, Shen W. Physical Hydrogels Photo-Cross-Linked from Self-Assembled Macromers for Potential Use in Tissue Engineering. Biomacromolecules 2009; 10:3182-7. [DOI: 10.1021/bm900908g] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Bo Liu
- Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455
| | - Andrew K. Lewis
- Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455
| | - Wei Shen
- Department of Biomedical Engineering, University of Minnesota, Minneapolis, Minnesota 55455
| |
Collapse
|
97
|
Cheung Y, Azeloglu E, Shiovitz D, Costa K, Seliktar D, Sia S. Microscale Control of Stiffness in a Cell-Adhesive Substrate Using Microfluidics-Based Lithography. Angew Chem Int Ed Engl 2009. [DOI: 10.1002/ange.200900807] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
98
|
Paxton JZ, Donnelly K, Keatch RP, Baar K. Engineering the bone-ligament interface using polyethylene glycol diacrylate incorporated with hydroxyapatite. Tissue Eng Part A 2009; 15:1201-9. [PMID: 18991487 DOI: 10.1089/ten.tea.2008.0105] [Citation(s) in RCA: 54] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
Ligaments and tendons have previously been tissue engineered. However, without the bone attachment, implantation of a tissue-engineered ligament would require it to be sutured to the remnant of the injured native tissue. Due to slow repair and remodeling, this would result in a chronically weak tissue that may never return to preinjury function. In contrast, orthopaedic autograft reconstruction of the ligament often uses a bone-to-bone technique for optimal repair. Since bone-to-bone repairs heal better than other methods, implantation of an artificial ligament should also occur from bone-to-bone. The aim of this study was to investigate the use of a poly(ethylene glycol) diacrylate (PEGDA) hydrogel incorporated with hydroxyapatite (HA) and the cell-adhesion peptide RGD (Arg-Gly-Asp) as a material for creating an in vitro tissue interface to engineer intact ligaments (i.e., bone-ligament-bone). Incorporation of HA into PEG hydrogels reduced the swelling ratio but increased mechanical strength and stiffness of the hydrogels. Further, HA addition increased the capacity for cell growth and interface formation. RGD incorporation increased the swelling ratio but decreased mechanical strength and stiffness of the material. Optimum levels of cell attachment were met using a combination of both HA and RGD, but this material had no better mechanical properties than PEG alone. Although adherence of the hydrogels containing HA was achieved, failure occurs at about 4 days with 5% HA. Increasing the proportion of HA improved interface formation; however, with high levels of HA, the PEG HA composite became brittle. This data suggests that HA, by itself or with other materials, might be well suited for engineering the ligament-bone interface.
Collapse
Affiliation(s)
- Jennifer Z Paxton
- Division of Molecular Physiology, University of Dundee, Dundee, United Kingdom
| | | | | | | |
Collapse
|
99
|
Tibbitt MW, Anseth KS. Hydrogels as extracellular matrix mimics for 3D cell culture. Biotechnol Bioeng 2009; 103:655-63. [PMID: 19472329 DOI: 10.1002/bit.22361] [Citation(s) in RCA: 1775] [Impact Index Per Article: 118.3] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Methods for culturing mammalian cells ex vivo are increasingly needed to study cell and tissue physiology and to grow replacement tissue for regenerative medicine. Two-dimensional culture has been the paradigm for typical in vitro cell culture; however, it has been demonstrated that cells behave more natively when cultured in three-dimensional environments. Permissive, synthetic hydrogels and promoting, natural hydrogels have become popular as three-dimensional cell culture platforms; yet, both of these systems possess limitations. In this perspective, we discuss the use of both synthetic and natural hydrogels as scaffolds for three-dimensional cell culture as well as synthetic hydrogels that incorporate sophisticated biochemical and mechanical cues as mimics of the native extracellular matrix. Ultimately, advances in synthetic-biologic hydrogel hybrids are needed to provide robust platforms for investigating cell physiology and fabricating tissue outside of the organism.
Collapse
Affiliation(s)
- Mark W Tibbitt
- Department of Chemical and Biological Engineering, University of Colorado, Boulder, CO, USA
| | | |
Collapse
|
100
|
Sarkar S, Isenberg BC, Hodis E, Leach JB, Desai TA, Wong JY. Fabrication of a layered microstructured polycaprolactone construct for 3-D tissue engineering. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2009; 19:1347-62. [PMID: 18854127 DOI: 10.1163/156856208786052371] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
Successful artificial tissue scaffolds support regeneration by promoting cellular organization as well as appropriate mechanical and biological functionality. We have previously shown in vitro that 2-D substrates with micrometer-scale grooves (5 microm deep, 18 microm wide, with 12 microm spacing) can induce cell orientation and ECM alignment. Here, we have transferred this microtopography onto biodegradable polycaprolactone (PCL) thin films. We further developed a technique to layer these cellularized microtextured scaffolds into a 3-D tissue construct. A surface modification technique was used to attach photoreactive acrylate groups on the PCL scaffold surface onto which poly(ethylene glycol)-diacrylate (PEG-DA) gel could be photopolymerized. PEG-DA serves as an adhesive layer between PCL scaffolds, resulting in a VSMC-seeded layered 3-D composite structure that is highly organized and structurally stable. The PCL surface modification chemistry was confirmed via XPS, and the maintenance of cell number and orientation on the modified PCL scaffolds was demonstrated using colorimetric and imaging techniques. Cell number and orientation were also investigated after cells were cultured in the layered 3-D configuration. Such 3-D tissue mimics fabricated with precise cellular organization will enable systematic testing of the effects of cellular orientation on the functional and mechanical properties of tissue-engineered blood vessels.
Collapse
Affiliation(s)
- Sumona Sarkar
- Department of Biomedical Engineering, Boston University, 44 Cummington Street, Boston, MA 02215, USA
| | | | | | | | | | | |
Collapse
|