Single-atom doping of MoS2 with manganese enables ultrasensitive detection of dopamine: Experimental and computational approach

A Comprehensive Review of the Recent Developments in Wearable Sweat-Sensing Devices

Sweat analysis offers non-invasive real-time on-body measurement for wearable sensors. However, there are still gaps in current developed sweat-sensing devices (SSDs) regarding the concerns of mixing fresh and old sweat and real-time measurement, which are the requirements to ensure accurate the measurement of wearable devices. This review paper discusses these limitations by aiding model designs, features, performance, and the device operation for exploring the SSDs used in different sweat collection tools, focusing on continuous and non-continuous flow sweat analysis. In addition, the paper also comprehensively presents various sweat biomarkers that have been explored by earlier works in order to broaden the use of non-invasive sweat samples in healthcare and related applications. This work also discusses the target analyte's response mechanism for different sweat compositions, categories of sweat collection devices, and recent advances in SSDs regarding optimal design, functionality, and performance.

Electrochemical Sensors Based on MoSx -Functionalized Laser-Induced Graphene for Real-Time Monitoring of Phenazines Produced by Pseudomonas aeruginosa

Pseudomonas aeruginosa (P. aeruginosa) is an opportunistic pathogen causing infections in blood and implanted devices. Traditional identification methods take more than 24 h to produce results. Molecular biology methods expedite detection, but require an advanced skill set. To address these challenges, this work demonstrates functionalization of laser-induced graphene (LIG) for developing flexible electrochemical sensors for P. aeruginosa based on phenazines. Electrodeposition as a facile approach is used to functionalize LIG with molybdenum polysulfide (MoSx ). The sensor's limit of detection (LOD), sensitivity, and specificity are determined in broth, agar, and wound simulating medium (WSM). Control experiments with Escherichia coli, which does not produce phenazines, demonstrate specificity of sensors for P. aeruginosa. The LOD for pyocyanin (PYO) and phenazine-1-carboxylic acid (PCA) is 0.19 × 10-6  and 1.2 × 10-6  m, respectively. Furthermore, the highly stable sensors enable real-time monitoring of P. aeruginosa biofilms over several days. Comparing square wave voltammetry data over time shows time-dependent generation of phenazines. In particular, two configurations-"Normal" and "Flipped"-are studied, showing that the phenazines time dynamics vary depending on how cells interact with sensors. The reported results demonstrate the potential of the developed sensors for integration with wound dressings for early diagnosis of P. aeruginosa infection.

Point-of-care biochemical assays using electrochemical technologies: approaches, applications, and opportunities

Against the backdrop of hidden symptoms of diseases and limited medical resources of their investigation, in vitro diagnosis has become a popular mode of real-time healthcare monitoring. Electrochemical biosensors have considerable potential for use in wearable products since they can consistently monitor the physiological information of the patient. This review classifies and briefly compares commonly available electrochemical biosensors and the techniques of detection used. Following this, the authors focus on recent studies and applications of various types of sensors based on a variety of methods to detect common compounds and cancer biomarkers in humans. The primary gaps in research are discussed and strategies for improvement are proposed along the dimensions of hardware and software. The work here provides new guidelines for advanced research on and a wider scope of applications of electrochemical biosensors to in vitro diagnosis.

Facile fabrication of screen-printed MoS2 electrodes for electrochemical sensing of dopamine

Molybdenum disulfide (MoS₂) screen-printed working electrodes were developed for dopamine (DA) electrochemical sensing. MoS₂ working electrodes were prepared from high viscosity screen-printable inks containing various concentrations and sizes of MoS₂ particles and ethylcellulose binder. Rheological properties of MoS₂ inks and their suitability for screen-printing were analyzed by viscosity curve, screen-printing simulation and oscillatory modulus. MoS₂ inks were screen-printed onto conductive FTO (Fluorine-doped Tin Oxide) substrates. Optical microscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX) analysis were used to characterize the homogeneity, topography and thickness of the screen-printed MoS₂ electrodes. The electrochemical performance was assessed through differential pulse voltammetry. Results showed an extensive linear detection of dopamine from 1 µM to 300 µM (R² = 0.996, sensitivity of 5.00 × 10^-8 A μM^-1), with the best limit of detection being 246 nM. This work demonstrated the possibility of simple, low-cost and rapid preparation of high viscosity MoS₂ ink and their use to produce screen-printed FTO/MoS₂ electrodes for dopamine detection.

Atomic and structural modifications of two-dimensional transition metal dichalcogenides for various advanced applications

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and their heterostructures have attracted significant interest in both academia and industry because of their unusual physical and chemical properties. They offer numerous applications, such as electronic, optoelectronic, and spintronic devices, in addition to energy storage and conversion. Atomic and structural modifications of van der Waals layered materials are required to achieve unique and versatile properties for advanced applications. This review presents a discussion on the atomic-scale and structural modifications of 2D TMDs and their heterostructures via post-treatment. Atomic-scale modifications such as vacancy generation, substitutional doping, functionalization and repair of 2D TMDs and structural modifications including phase transitions and construction of heterostructures are discussed. Such modifications on the physical and chemical properties of 2D TMDs enable the development of various advanced applications including electronic and optoelectronic devices, sensing, catalysis, nanogenerators, and memory and neuromorphic devices. Finally, the challenges and prospects of various post-treatment techniques and related future advanced applications are addressed.

Immuno-affinity Potent Strip with Pre-Embedded Intermixed PEDOT:PSS Conductive Polymers and Graphene Nanosheets for Bio-Ready Electrochemical Biosensing of Central Nervous System Injury Biomarkers

Future point-of-care (PoC) and wearable electrochemical biosensors explore new technology solutions to eliminate the need for multistep electrode modification and functionalization, overcome the limited reproducibility, and automate the sensing steps. In this work, a new screen-printed immuno-biosensor strip is engineered and characterized using a hybrid graphene nanosheet intermixed with the conductive poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymers, all embedded within the base carbon matrix (GiPEC) of the screen-printing ink. This intermixed nanocomposite ink is chemically designed for self-containing the "carboxyl" functional groups as the most specific chemical moiety for protein immobilization on the electrodes. The GiPEC ink enables capturing the target antibodies on the electrode without any need for extra surface preparation. As a proof of concept, the performance of the non-functionalized ready-to-immobilize strips was assessed for the detection of glial fibrillary acidic protein (GFAP) as a known central nervous system injury blood biomarker. This immuno-biosensor exhibits the limit of detection of 281.7 fg mL^-1 (3 signal-to-noise ratio) and the sensitivity of 322.6 Ω mL pg^-1 mm^-2 within the clinically relevant linear detection range from 1 pg mL^-1 to 10 ng mL^-1. To showcase its potential PoC application, the bio-ready strip is embedded inside a capillary microfluidic device and automates electrochemical quantification of GFAP spiked in phosphate-buffered saline and the human serum. This new electrochemical biosensing platform can be further adapted for the detection of various protein biomarkers with the application in realizing on-chip immunoassays.

Magnetic Order, Electrical Doping, and Charge-State Coupling at Amphoteric Defect Sites in Mn-Doped 2D Semiconductors

Two-dimensional (2D) dilute magnetic semiconductors (DMSs) are attractive material platforms for applications in multifunctional nanospintronics due to the prospect of embedding controllable magnetic order within nanoscale semiconductors. Identifying candidate host material and dopant systems requires consideration of doping formation energies, magnetic ordering, and the tendency for dopants to form clustered domains. In this work, we consider the defect thermodynamics and the dilute magnetic properties across charge states of 2D-MoS₂ and 2D-WS₂ with Mn magnetic dopants as candidate systems for 2D-DMSs. Using hybrid density functional calculations, we study the magnetic and electronic properties of these systems across configurations with thermodynamically favorable defects: 2D-MoS₂ doped with Mn atoms at sulfur site (Mn_S), at two Mo sites (2Mn_Mo), on top of a Mo atom (Mn-top), and at a Mo site (Mn_Mo). While the majority of the Mn-defect complexes provide trap states, Mn_Mo and Mn_W are amphoteric, although previously predicted to be donor defects. The impact of cluster formation of these amphoteric defects on magnetic ordering is also considered; both Mn_Mo-Mn_Mo (2Mn_2Mo) and Mn_W-Mn_W (2Mn_2W) clusters are found to be stable in ferromagnetic (FM) ordering. Interestingly, we observed the defect charge state dependent magnetic behavior of 2Mn_2Mo and 2Mn_2W clusters in 2D-TMDs. We investigate that the FM coupling of 2Mn_2Mo and 2Mn_2W clusters is stable in only a neutral charge state; however, the antiferromagnetic (AFM) coupling is stable in the +1 charge state. 2Mn_2Mo clusters provide shallow donor levels in AFM coupling and deep donor levels in FM coupling. 2Mn_2W clusters lead to trap states in the FM and AFM coupling. We demonstrate the AFM to FM phase transition at a critical electron density n^c_e = 3.5 × 10¹³ cm^-2 in 2D-MoS₂ and 2D-WS₂. At a 1.85% concentration of Mn, we calculate the Curie temperature of 580 K in the mean-field approximation.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates

Direct conversion of methane (CH₄) to C_1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH₄ to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO₂ generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH₄ to C_1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

In situ synthesis of Co-doped MoS2 nanosheet for enhanced mimicking peroxidase activity

To enhance the catalytic activity of two-dimensional layered materials as versatile materials, the modification of transition metal dichalcogenide nanosheets such as MoS₂ by doping with heteroatoms has drawn great interests. However, few reports are available on the study of the enzyme-like activity of doped MoS₂. In this study, a facile in situ hydrothermal method for the preparation of various ultrathin transition metals (Fe, Cu, Co, Mn, and Ni) doped MoS₂ nanosheets has been reported. Through the density functional theory (DFT) and steady-state kinetic analysis, the Co-doped MoS₂ nanosheets exhibited the highest peroxidase-like catalytic activity among them. Furthermore, a typical colorimetric assay for H₂O₂ was presented based on the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB) by Co-MoS₂. The proposed colorimetric method showed excellent tolerance under extreme conditions and a broad linear range from 0.0005 to 25 mM for H₂O₂ determination. Concerning the practical application, in situ detection of H₂O₂ generated from SiHa cells was also fulfilled, fully confirming the great practicability of the proposed method in biosensing fields.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07201-z.

Microneedle-based nanoporous gold electrochemical sensor for real-time catecholamine detection

Dopamine (DA), epinephrine (EP), and norepinephrine (NEP) are the main catecholamine of clinical interest, as they play crucial roles in the regulation of nervous and cardiovascular systems and are involved in some brain behaviors, such as stress, panic, anxiety, and depression. Therefore, there is an urgent need for a reliable sensing device able to provide their continuous monitoring in a minimally invasive manner. In this work, the first highly nanoporous gold (h-nPG) microneedle-based sensor is presented for continuous monitoring of catecholamine in interstitial fluid (ISF). The h-nPG microneedle-based gold electrode was prepared by a simple electrochemical self-templating method that involves two steps, gold electrodeposition and hydrogen bubbling at the electrode surface, realized by sweeping the potential between + 0.8 V and 0 V vs Ag/AgCl for 25 scans in a 10 mM HAuCl₄ solution containing 2.5 M NH₄Cl, and successively applying a fixed potential of − 2 V vs Ag/AgCl for 60 s. The resulting microneedle-based h-nPG sensor displays an interference-free total catecholamine detection expressed as NEP concentration, with a very low LOD of 100 nM, excellent sensitivity and stability, and fast response time (< 4 s). The performance of the h-nPG microneedle array sensor was successively assessed in artificial ISF and in a hydrogel skin model at typical physiological concentrations.

MXene-Supported, Atomic-Layered Iridium Catalysts Created by Nanoparticle Re-Dispersion for Efficient Alkaline Hydrogen Evolution

Tailoring the structure of metal components and interaction with their anchored substrates is essential for improving the catalytic performance of supported metal catalysts; the ideal catalytic configuration, especially down to the range of atomic layers, clusters, and even single atoms, remains a subject under intensive study. Here, an Ir-on-MXene (Mo₂ TiC₂ T_x ) catalyst with controlled morphology changing from nanoparticles down to flattened atomic layers, and finally ultrathin layers and single atoms dispersed on MXene nanosheets at elevated temperature, is presented. The intermediate structure, consisting of mostly Ir atomic layers, shows the highest activity toward the hydrogen evolution reaction (HER) under industry-compatible alkaline conditions. In addition, the better HER activity of Ir atomic layers than that of single atoms suggests that the former serves as the main active sites. Detailed mechanism analysis reveals that the nanoparticle re-dispersion process and Ir atomic layers with a moderate interaction to the substrate associate with unconventional electron transfer from MXene to Ir, leading to suitable H* adsorption. The results indicate that the structural design is important for the development of highly efficient catalysts.

Perspective for Single Atom Nanozymes Based Sensors: Advanced Materials, Sensing Mechanism, Selectivity Regulation, and Applications

Nanozymes are a kind of nanomaterial mimicking enzyme catalytic activity, which has aroused extensive interest in the fields of biosensors, biomedicine, and climate and ecosystems management. However, due to the complexity of structures and composition of nanozymes, atomic scale active centers have been extensively investigated, which helps with in-depth understanding of the nature of the biocatalysis. Single atom nanozymes (SANs) cannot only significantly enhance the activity of nanozymes but also effectively improve the selectivity of nanozymes owing to the characteristics of simple and adjustable coordination environment and have been becoming the brightest star in the nanozyme spectrum. The SANs based sensors have also been widely investigated due to their definite structural features, which can be helpful to study the catalytic mechanism and provide ways to improve catalytic activity. This perspective presents a comprehensive understanding on the advances and challenges on SANs based sensors. The catalytic mechanisms of SANs and then the sensing application from the perspectives of sensing technology and sensor construction are thoroughly analyzed. Finally, the major challenges, potential future research directions, and prospects for further research on SANs based sensors are also proposed.

Assessing doping strategies for monolayer MoS2 towards non-enzymatic detection of cortisol: a first-principles study

In this work, we investigate by means of atomistic density functional theory simulations the interaction between cortisol (the target molecule) and monolayer MoS₂ (the substrate). The aim is to assess viable strategies for the non-enzymatic chemical sensing of cortisol. Metal doping of the sensing material could offer a way to improve the device response upon analyte adsorption, and could also enable novel and alternative detection mechanisms. For such reasons, we explore metal doping of MoS₂ with Ni, Pd, and Pt, as these are metal elements commonly used in experiments. Then, we study the material response from the structural, electronic, and charge-transfer points of view. Based on our results, we propose two possible sensing mechanisms and device architectures: (i) a field-effect transistor, and (ii) an electrochemical sensor. In the former, Ni-doped MoS₂ would act as the FET channel, and the sensing mechanism involves the variation of the surface electrostatic charge upon the adsorption of cortisol. In the latter, MoS₂ decorated with Pt nanoparticles could act as the working electrode, and the sensing mechanism would involve the reduction of cortisol. In addition, our findings may suggest the suitability of both doped and metal-doped MoS₂ as sensing layers in an optical sensor.

In situ polymerization confinement synthesis of ultrasmall MoTe2 nanoparticles for the electrochemical detection of dopamine

Ultrasmall MoTe2 nanoparticles has been synthesized using an in situ polymerization confinement method, which exhibits a low limit of detection and excellent selectivity for electrochemical dopamine sensors.

DNA Origami-Templated Bimetallic Nanostar Assemblies for Ultra-Sensitive Detection of Dopamine

The abundance of hotspots tuned via precise arrangement of coupled plasmonic nanostructures highly boost the surface-enhanced Raman scattering (SERS) signal enhancements, expanding their potential applicability to a diverse range of applications. Herein, nanoscale assembly of Ag coated Au nanostars in dimer and trimer configurations with tunable nanogap was achieved using programmable DNA origami technique. The resulting assemblies were then utilized for SERS-based ultra-sensitive detection of an important neurotransmitter, dopamine. The trimer assemblies were able to detect dopamine with picomolar sensitivity, and the assembled dimer structures achieved SERS sensitivity as low as 1 fM with a limit of detection of 0.225 fM. Overall, such coupled nanoarchitectures with superior plasmon tunability are promising to explore new avenues in biomedical diagnostic applications.

Breaking the barrier to biomolecule limit-of-detection via 3D printed multi-length-scale graphene-coated electrodes

Sensing of clinically relevant biomolecules such as neurotransmitters at low concentrations can enable an early detection and treatment of a range of diseases. Several nanostructures are being explored by researchers to detect biomolecules at sensitivities beyond the picomolar range. It is recognized, however, that nanostructuring of surfaces alone is not sufficient to enhance sensor sensitivities down to the femtomolar level. In this paper, we break this barrier/limit by introducing a sensing platform that uses a multi-length-scale electrode architecture consisting of 3D printed silver micropillars decorated with graphene nanoflakes and use it to demonstrate the detection of dopamine at a limit-of-detection of 500 attomoles. The graphene provides a high surface area at nanoscale, while micropillar array accelerates the interaction of diffusing analyte molecules with the electrode at low concentrations. The hierarchical electrode architecture introduced in this work opens the possibility of detecting biomolecules at ultralow concentrations.

Graphene Biodevices for Early Disease Diagnosis Based on Biomarker Detection

The early diagnosis of diseases plays a vital role in healthcare and the extension of human life. Graphene-based biosensors have boosted the early diagnosis of diseases by detecting and monitoring related biomarkers, providing a better understanding of various physiological and pathological processes. They have generated tremendous interest, made significant advances, and offered promising application prospects. In this paper, we discuss the background of graphene and biosensors, including the properties and functionalization of graphene and biosensors. Second, the significant technologies adopted by biosensors are discussed, such as field-effect transistors and electrochemical and optical methods. Subsequently, we highlight biosensors for detecting various biomarkers, including ions, small molecules, macromolecules, viruses, bacteria, and living human cells. Finally, the opportunities and challenges of graphene-based biosensors and related broad research interests are discussed.

Enabling multifunctional electrocatalysts by modifying the basal plane of unifunctional 1T'-MoS2 with anchored transition metal single atoms

Multifunctional electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are attractive for overall water-splitting, rechargeable metal-air batteries, and unitized regenerative fuel cells. A single-atom catalyst (SAC) may exhibit additional advantages over its nanoparticle counterpart, and already there have been significant advances in the development of bifunctional and trifunctional SACs for HER, ORR, and OER, but great challenges remain for their rational design. Herein, we propose a strategy to realize multifunctional SACs, i.e., modifying unifunctional materials to introduce new active sites on the surface. Specifically, by virtue of the intrinsic excellent HER performance of 1T'-MoS₂, we theoretically design multifunctional SACs by anchoring appropriate transition-metal single atoms. Intriguingly, 1T'-MoS₂ with supported Co single atoms (Co@MoS₂) are demonstrated to be highly active for both OER and ORR with ultralow overpotentials of less than 0.3 V, ascribed to the moderate chemical activity and unique electronic structure of the Co atomic center. Consequently, combining the intrinsic HER activity of 1T'-MoS₂, Co@MoS₂ is proposed to be promising efficient trifunctional SACs. Further, the phase engineering on SACs is unrevealed and elucidated by comparing the properties of the Co atomic center-supported on 1T'-MoS₂ and 1H-MoS₂. This work provides a feasible strategy for the design of multifunctional SACs for the renewable and sustainable energy technology and provides an insight into the phase engineering on SACs.

Recent Advances in Immunosafety and Nanoinformatics of Two-Dimensional Materials Applied to Nano-imaging

Two-dimensional (2D) materials have emerged as an important class of nanomaterials for technological innovation due to their remarkable physicochemical properties, including sheet-like morphology and minimal thickness, high surface area, tuneable chemical composition, and surface functionalization. These materials are being proposed for new applications in energy, health, and the environment; these are all strategic society sectors toward sustainable development. Specifically, 2D materials for nano-imaging have shown exciting opportunities in in vitro and in vivo models, providing novel molecular imaging techniques such as computed tomography, magnetic resonance imaging, fluorescence and luminescence optical imaging and others. Therefore, given the growing interest in 2D materials, it is mandatory to evaluate their impact on the immune system in a broader sense, because it is responsible for detecting and eliminating foreign agents in living organisms. This mini-review presents an overview on the frontier of research involving 2D materials applications, nano-imaging and their immunosafety aspects. Finally, we highlight the importance of nanoinformatics approaches and computational modeling for a deeper understanding of the links between nanomaterial physicochemical properties and biological responses (immunotoxicity/biocompatibility) towards enabling immunosafety-by-design 2D materials.

Regenerative field effect transistor biosensor for in vivo monitoring of dopamine in fish brains

The detection of dopamine, one of the neurotransmitters in cerebral physiology, is critical in studying brain activities and understanding brain functions. However, regenerative biosensor for monitoring dopamine in the progress of physiological and pathological events is still challenging, due to lack of the platform for repetitive on-line detection-regeneration cycle. Herein, we have developed a regenerated field effect transistor (FET) combined with in vivo monitoring system. In this biosensor, gold-coated magnetic nanoparticles (Fe₃O₄@AuNPs) acts as a regenerated recognition unit for dopamine. Just by simple removal of a permanent magnet, dopamine on the biosensor interface are catalyzed by tyrosinase, thus achieving the regeneration of the biosensor. As a result, this FET biosensor not only reveals high sensitivity and selectivity, but also exhibits excellent stability after 15 regeneration processing. This biosensor is capable of monitor dopamine with a linear range between 1 μmol L^-1 and 120 μmol L^-1 and low detection limit (DL) of 3.3 nmol L^-1. Then, the platform has been successfully applied in dopamine analysis in fish brain under global cerebral cortical neurons. This FET biosensor is the first to on-line and remote control the sensitivity and DL by permanent magnet. It opens the door to reusable, inexpensive and large-scale productions.

Single-Atom Ruthenium Biomimetic Enzyme for Simultaneous Electrochemical Detection of Dopamine and Uric Acid

Single-atom catalysts have attracted numerous attention due to the high utilization of metallic atoms, abundant active sites, and highly catalytic activities. Herein, a single-atom ruthenium biomimetic enzyme (Ru-Ala-C₃N₄) is prepared by dispersing Ru atoms on a carbon nitride support for the simultaneous electrochemical detection of dopamine (DA) and uric acid (UA), which are coexisting important biological molecules involving in many physiological and pathological aspects. The morphology and elemental states of the single-atom Ru catalyst are studied by transmission electron microscopy, energy dispersive X-ray elemental mapping, high-angle annular dark field-scanning transmission electron microscopy, and high-resolution X-ray photoelectron spectroscopy. Results show that Ru atoms atomically disperse throughout the C₃N₄ support by Ru-N chemical bonds. The electrochemical characterizations indicate that the Ru-Ala-C₃N₄ biosensor can simultaneously detect the oxidation of DA and UA with a separation of peak potential of 180 mV with high sensitivity and excellent selectivity. The calibration curves for DA and UA range from 0.06 to 490 and 0.5 to 2135 μM with detection limits of 20 and 170 nM, respectively. Moreover, the biosensor was applied to detect DA and UA in real biological serum samples using the standard addition method with satisfactory results.

Colloidal Nanostructures of Transition-Metal Dichalcogenides

ConspectusLayered transition-metal dichalcogenides (TMDs) are intriguing two-dimensional (2D) compounds where metal and chalcogen atoms are covalently bonded in each monolayer, and the monolayers are held together by weak van der Waals forces. Distinct from graphene, which is chemically inert, layered TMDs exhibit a wide range of electronic, optical, catalytic, and magnetic properties dependent upon their compositions, crystal structures, and thicknesses, which make them fundamentally and technologically important. TMD nanostructures are traditionally synthesized using gas-phase chemical deposition methods, which are typically limited to small-scale samples of substrate-bound planar materials. Colloidal synthesis has emerged as an alternative synthesis approach to enable the scalable synthesis of free-standing TMDs. The judicious selection of precursors, solvents, and capping ligands together with the optimization of synthesis parameters such as concentrations and temperatures leads to the fabrication of colloidal TMD nanostructures exhibiting tunable properties. In addition, understanding the formation and transformation of TMD nanostructures in solution contributes to the discovery of important structure-function relationships, which may be extendable to other anisotropic systems.In this Account, we summarize recent progress in the colloidal synthesis, characterization, and applications of TMD nanostructures with tunable compositions, structures, and thicknesses. On the basis of the preparation of Mo- and W-based disulfide, diselenide, and ditelluride nanostructures, we discuss examples of phase engineering where various metastable TMD compounds can be directly accessed at low temperatures in solution. We also analyze the chemistry involved in broadly tuning the composition across the MoSe₂-WSe₂, WS₂-WSe₂, and MoTe₂-WTe₂ solid solutions as well as atomic-level microscopic characterization and the resulting composition-tunable properties. We then highlight how the high densities of defects in the colloidally synthesized TMD nanostructures enable unique catalytic properties, including their ability to facilitate the selective hydrogenation of substituted nitroarenes using molecular hydrogen. Finally, using this library of colloidal TMD nanostructures as substrates, we discuss the pathways by which noble metals deposit onto them in solution. We highlight the importance of the relative strengths of the interfacial metal-chalcogen bonds in determining the sizes and morphologies of the deposited noble metal components. These synthesis capabilities for colloidal TMD nanostructures, which have been generalized to a library of composition-tunable phases, enable new systematic studies of structure-property relationships and chemical reactivity in this important class of 2D materials.

Facile Post-deposition Annealing of Graphene Ink Enables Ultrasensitive Electrochemical Detection of Dopamine

A growing body of research focuses on engineering materials for electrochemical detection of dopamine (DA), a critical neurotransmitter involved in motor function, reward processes, and blood pressure regulation. Among various sensing materials, graphene is highly attractive due to its excellent electrical conductivity and, in particular, the π-π interaction between the aromatic rings of DA and graphene. However, the lowest detection limits reported solely using graphene are nominally 1 nM. To improve the sensor sensitivity, various strategies are being explored, including chemical functionalization, heterostructure/composite formation, elemental doping, and modification with biomolecules (aptamers, enzymes, etc.). In this work, we demonstrate that commercially available graphene ink can exhibit selective and highly sensitive detection of DA by tuning the surface chemistry utilizing a simple, one-step annealing process. The annealing condition directly impacts the sensor response to DA, with the optimal conditions (30 min at 300 °C under 3% H₂ + Ar) yielding a distinguishable and selective response to DA down to 5 pM. X-ray photoelectron spectroscopy (XPS) confirms that the improved selectivity is due to the increased fraction of oxygen functionalities (in particular, C-OH), while Raman spectroscopy shows a higher degree of defectiveness for this condition compared to others. Evaluation of the interaction of three molecular components of DA (i.e., aromatic ring, hydroxyl groups, and amine group) with graphene confirms that the π-π interaction and -OH groups play a prominent role in the improved adsorption of DA on the graphene surface. Furthermore, we demonstrate a proof-of-concept, all-solution processable sensor on polyimide substrates using graphene ink. Tuning the sensor response by varying the annealing condition offers a simple avenue for developing sensitive, selective, and low-cost point-of-care biosensors, while low-temperature annealing ensures compatibility with flexible substrates, such as polyimide.

Advances in the development paradigm of biosample-based biosensors for early ultrasensitive detection of alzheimer's disease

This review highlights current developments, challenges, and future directions for the use of invasive and noninvasive biosample-based small biosensors for early diagnosis of Alzheimer's disease (AD) with biomarkers to incite a conceptual idea from a broad number of readers in this field. We provide the most promising concept about biosensors on the basis of detection scale (from femto to micro) using invasive and noninvasive biosamples such as cerebrospinal fluid (CSF), blood, urine, sweat, and tear. It also summarizes sensor types and detailed analyzing techniques for ultrasensitive detection of multiple target biomarkers (i.e., amyloid beta (Aβ) peptide, tau protein, Acetylcholine (Ach), microRNA137, etc.) of AD in terms of detection ranges and limit of detections (LODs). As the most significant disadvantage of CSF and blood-based detection of AD is associated with the invasiveness of sample collection which limits future strategy with home-based early screening of AD, we extensively reviewed the future trend of new noninvasive detection techniques (such as optical screening and bio-imaging process). To overcome the limitation of non-invasive biosamples with low concentrations of AD biomarkers, current efforts to enhance the sensitivity of biosensors and discover new types of biomarkers using non-invasive body fluids are presented. We also introduced future trends facing an infection point in early diagnosis of AD with simultaneous emergence of addressable innovative technologies.

A covalent organic polymer-TiO2/Ti3C2 heterostructure as nonenzymatic biosensor for voltammetric detection of dopamine and uric acid

Heterostructures have potential to blend the advantages of each material, even exhibiting the evolutionary performance due to synergistic effects. Herein, covalent organic polymers (NUF) are integrated with a TiO₂/Ti₃C₂T_x nanocomposite (TiO₂/TiCT) to form TiO₂/TiCT-NUF heterojunctions as an enlarged nonenzymatic biosensor for dopamine (DA) and uric acid (UA). Detection is performed by differential pulse voltammetry (DPV). The TiO₂/TiCT/NUF exhibits high sensing activity with low detection limits of 0.2 and 0.18 nM (S/N = 3) in the concentration ranges from 0.002 to 100 μM and 0.001 to 60 μM for simultaneous determination of DA and UA, respectively. In addition, the TiO₂/TiCT/NUF provides good selectivity and reproducibility for DA and UA detection in urine and serum samples with recoveries of 98.4 to 100.9%. The proposed heterojunctions manifest an intriguing potential as a candidate of an electrochemical sensor for sole and simultaneous detection of DA and UA.

Single-atom catalysts boost signal amplification for biosensing

Development of highly sensitive biosensors has received ever-increasing attention over the years. Due to the unique physicochemical properties, the functional nanomaterial-enabled signal amplification strategy has made some great breakthroughs in biosensing. However, the sensitivity and selectivity still need further improvement. Single-atom catalysts (SACs) containing atomically dispersed metal active sites demonstrate distinctive advantages in catalytic activity and selectivity for various catalytic reactions. As a consequence, the SAC-enabled signal amplification strategy holds great promise in biosensors, demonstrating satisfactory sensitivity and selectivity with the assistance of tunable metal-support interactions, coordination environments and geometric/electronic structures of active sites. In this tutorial review, we briefly discuss the structural advantages of SACs. Then, the catalytic mechanism at the atomic scale and signal amplification effects of SACs in the colorimetric, electrochemical, chemiluminescence, electrochemiluminescence, and photoelectrochemical biosensing applications are highlighted in detail. Finally, opportunities and challenges to be faced in the future development of the SAC-enabled signal amplification strategy for biosensing are discussed and outlooked.

Scalable Substitutional Re-Doping and its Impact on the Optical and Electronic Properties of Tungsten Diselenide

Reliable, controlled doping of 2D transition metal dichalcogenides will enable the realization of next-generation electronic, logic-memory, and magnetic devices based on these materials. However, to date, accurate control over dopant concentration and scalability of the process remains a challenge. Here, a systematic study of scalable in situ doping of fully coalesced 2D WSe₂ films with Re atoms via metal-organic chemical vapor deposition is reported. Dopant concentrations are uniformly distributed over the substrate surface, with precisely controlled concentrations down to <0.001% Re achieved by tuning the precursor partial pressure. Moreover, the impact of doping on morphological, chemical, optical, and electronic properties of WSe₂ is elucidated with detailed experimental and theoretical examinations, confirming that the substitutional doping of Re at the W site leads to n-type behavior of WSe₂ . Transport characteristics of fabricated back-gated field-effect-transistors are directly correlated to the dopant concentration, with degrading device performances for doping concentrations exceeding 1% of Re. The study demonstrates a viable approach to introducing true dopant-level impurities with high precision, which can be scaled up to batch production for applications beyond digital electronics.

Mo-Based Layered Nanostructures for the Electrochemical Sensing of Biomolecules

Mo-based layered nanostructures are two-dimensional (2D) nanomaterials with outstanding characteristics and very promising electrochemical properties. These materials comprise nanosheets of molybdenum (Mo) oxides (MoO2 and MoO3), dichalcogenides (MoS2, MoSe2, MoTe2), and carbides (MoC2), which find application in electrochemical devices for energy storage and generation. In this feature paper, we present the most relevant characteristics of such Mo-based layered compounds and their use as electrode materials in electrochemical sensors. In particular, the aspects related to synthesis methods, structural and electronic characteristics, and the relevant electrochemical properties, together with applications in the specific field of electrochemical biomolecule sensing, are reviewed. The main features, along with the current status, trends, and potentialities for biomedical sensing applications, are described, highlighting the peculiar properties of Mo-based 2D-nanomaterials in this field.