Chemistry of Hofmeister anions and osmolytes

Trade-off between carbohydrates and metal ions regulates the chemotactic directionality of alkaline phosphatase

The role of the Hofmeister interaction in governing the chemotactic behavior of alkaline phosphatase in the presence of carbohydrate and metal ion gradients has been established.

Conformation and Metal Cation Binding of Zwitterionic Alanine Tripeptide in Saline Solutions by Infrared Vibrational Spectroscopy and Molecular Dynamics Simulations

In this work, linear infrared (IR) spectroscopy and molecular dynamics (MD) simulations were used to examine the interaction of different metal cations (Na⁺, Ca²⁺, Mg²⁺, and Zn²⁺) with backbone (amide C═O) and C-terminal carboxylate (COO^-) groups in zwitterionic alanine tripeptide (Ala3) in aqueous solutions with varying saline concentrations. Circular dichroism spectra and MD results suggest that Ala3 is predominantly in polyproline-II (PP_II) conformation, whose amide-I and asymmetric carboxylate stretching IR vibration signatures are also supported by quantum-chemistry calculations. The zwitterionic form of Ala3 separates the two amide-I modes in frequency, which are weakly coupled modes, as revealed by two-dimensional IR measurement, and can be used to probe backbone-cation interactions at different scenarios (near charged or neutral chemical groups respectively). Cation concentration-dependent IR frequency red shifts in the amide-I mode are seen for both amide-I modes, whereas blue shifts are also seen in the amide-I mode far from the NH₃⁺ group. The observed spectral changes are discussed from the perspective of the salting-in and salting-out abilities of the cations. In addition, all the metal cations studied here (except Zn²⁺) can specifically coordinate to the COO^- group in bidentate and pseudo-bridging forms simultaneously. For Zn²⁺, only the pseudo-bridging form exists. Our results shed light on the macroscopic protein salting-in and salting-out phenomena from the perspective of key chemical bonds in peptides.

Specific Ion Effects in Different Media: Current Status and Future Challenges

We discuss the current state of research as well as the future challenges for a deeper understanding of specific ion effects in protic and aprotic solvents as well as various additional media. Despite recent interest in solute or interfacial effects, we focus exclusively on the specific properties of ions in bulk electrolyte solutions. Corresponding results show that many mechanisms remain unknown for these simple media, although theoretical, computational, and experimental studies have provided some insights into explaining individual observations. In particular, the importance of local interactions and electronic properties is emphasized, which enabled a more consistent interpretation of specific ion effects over the past years. Despite current insufficient knowledge, we also discuss future challenges in relation to dynamic properties as well as the influence of different concentrations, different solvents, and solute contributions to gain a deeper understanding of specific ion effects for technological applications.

Anion Specific Effects at Negatively Charged Interfaces: Influence of Cl-, Br-, I-, and SCN- on the Interactions of Na+ with the Carboxylic Acid Moiety

Unlike counterion interactions with charged interfaces, the influence of co-ions is only scarcely reported in the literature. In this work, the effect of SCN- and the halide co-ions in the interactions of Na+ with carboxylic acid Langmuir monolayers is investigated by using vibrational sum frequency spectroscopy. At 1 M concentrations in the subphase, the identity of the anion is shown to have a remarkable influence on the charging behavior and degree of deprotonation of the monolayer, with ions ordering in the sequence I- > SCN- > Cl- ≈ Br-. The same trend is observed at both pH 6 and pH 9 when the monolayer is intrinsically more charged. Spectroscopic evidence is found for both the presence of I- and SCN- in the interfacial region at levels close to their detection limits. The results contradict electrostatic theories on charged interfaces where co-ions are not expected to play any significant role. The higher propensity for the large polarizable anions to deprotonate the monolayer is explained in terms of their ability to modify the cations affinity toward the carboxylic acid groups present at the surface.

Electronic Properties of Protein Destabilizers and Stabilizers: Implications for Preferential Binding and Exclusion Mechanisms

We study the electronic properties of low-weight organic co-solutes by means of conceptual density functional theory calculations. Our results highlight the important role of certain chemical reactivity descriptors such as chemical hardness, electronegativity, nucleofugality, and the electrofugality as important criteria to classify protein stabilizers and destabilizers. Our results imply Lewis basic properties with lower chemical hardness for stabilizers, while destabilizers show higher Lewis acidity with higher chemical hardness. Further consideration of analytical calculations in terms of transfer energies reveals the crucial role of co-solute-protein interactions which significantly change the interaction pattern of the stabilizing or destabilizing species. The corresponding outcomes connect statistical thermodynamics with the electronic properties of co-solutes and also allow us to define general principles for strong stabilizers and destabilizers.

Effects of amino acid additives on protein solubility - insights from desorption and direct electrospray ionization mass spectrometry

Naturally occurring amino acids have been broadly used as additives to improve protein solubility and inhibit aggregation. In this study, improvements in protein signal intensity obtained with the addition of L-serine, and structural analogs, to the desorption electrospray ionization mass spectrometry (DESI-MS) spray solvent were measured. The results were interpreted at the hand of proposed mechanisms of solution additive effects on protein solubility and dissolution. DESI-MS allows for these processes to be studied efficiently using dilute concentrations of additives and small amounts of proteins, advantages that represent real benefits compared to classical methods of studying protein stability and aggregation. We show that serine significantly increases the protein signal in DESI-MS when native proteins are undergoing unfolding during the dissolution process with an acidic solvent system (p-value = 0.0001), or with ammonium bicarbonate under denaturing conditions for proteins with high isoelectric points (p-value = 0.001). We establish that a similar increase in the protein signal cannot be observed with direct ESI-MS, and the observed increase is therefore not related to ionization processes or changes in the physical properties of the bulk solution. The importance of the presence of serine during protein conformational changes while undergoing dissolution is demonstrated through comparisons between the analyses of proteins deposited in native or unfolded states and by using native state-preserving and denaturing desorption solvents. We hypothesize that direct, non-covalent interactions involving all three functional groups of serine are involved in the beneficial effect on protein solubility and dissolution. Supporting evidence for a direct interaction include a reduction in efficacy with D-serine or the racemic mixture, indicating a non-bulk-solution physical property effect; insensitivity to the sample surface type or relative placement of serine addition; and a reduction in efficacy with any modifications to the serine structure, most notably the carboxyl functional group. An alternative hypothesis, also supported by some of our observations, could involve the role of serine clusters in the mechanism of solubility enhancement. Our study demonstrates the capability of DESI-MS together with complementary ESI-MS experiments as a novel tool for understanding protein solubility and dissolution and investigating the mechanism of action for solubility-enhancing additives.

Stabilization of DPPC lipid bilayers in the presence of co-solutes: molecular mechanisms and interaction patterns

We study the interactions between dipalmitoylphosphatidylcholine (DPPC) lipid bilayers in the gel and the fluid phase with ectoine, amino ectoine and water molecules by means of atomistic molecular dynamics (MD) simulations and conceptual density functional theory (DFT) calculations. Our results reveal a pronounced preferential exclusion of both co-solutes from the DPPC lipid bilayer which is stronger for the fluid phase. The corresponding outcomes can be brought into relation with the Kirkwood-Buff theory of solutions in order to provide a thermodynamic rationale for the experimentally observed stabilization of the gel phase. Closely related to preferential exclusion of both co-solutes, our simulations also highlight a preferential hydration behavior as manifested by an increased number of hydrogen bonds between water and DPPC molecules. All results are rationalized by conceptual DFT calculations with regard to differences in the electronic properties between ectoine and amino ectoine.

Novel Fluorescence Guanidine Molecules for Selective Sulfate Anion Detection in Water Complex Samples over a Wide pH Range

Quantitative analysis of sulfate anions in water still remains an important challenge for the society. Among all the methodologies, the most successful one is based on optical supramolecular receptors because the presence of small concentrations of sulfate anion modifies the photophysical properties of the receptor. In this case, fluorescence anion sensors have been designed by the incorporation of guanidine motifs into fluorenyl cores. The photophysical behaviors of the new mono- (M) and bis-guanidine (B) derivatives were studied through pH dependence, solvent effects, and ion sensing on steady-state spectra and time-resolved fluorescence spectroscopy. In more detail, the results demonstrate that M is a highly selective and sensitive sulfate ion receptor in real water samples and, even more importantly, its function remains unchanged at different ranges of pH. The reason behind this resides on the fluorescence quenching produced by an internal charge-transfer process when the sulfate anion is complexed with M. It is worth noting that the global and partial affinity constants (10¹⁰ M^-2 and 10⁵ M^-1, respectively) of complex formation are far above from the current sulfate sensors in water (10⁴ M^-1) which give an LOD of 0.10 μM in water with an analytical range of 2.5-10 μM. On the other hand, although it would seem, at first sight, that the B derivate will be the most promising one, the possibility of having two simultaneous protonation states reduces the complex formation and, therefore, its sensitivity to sulfate anions. The results presented here offer the possibility of using a new molecule in water environments, which opens the door to infinite applications such as the detection of trace amounts of sulfate ions in food or water.

Atomic view of cosolute-induced protein denaturation probed by NMR solvent paramagnetic relaxation enhancement

The cosolvent effect arises from the interaction of cosolute molecules with a protein and alters the equilibrium between native and unfolded states. Denaturants shift the equilibrium toward the latter, while osmolytes stabilize the former. The molecular mechanism whereby cosolutes perturb protein stability is still the subject of considerable debate. Probing the molecular details of the cosolvent effect is experimentally challenging as the interactions are very weak and transient, rendering them invisible to most conventional biophysical techniques. Here, we probe cosolute-protein interactions by means of NMR solvent paramagnetic relaxation enhancement together with a formalism we recently developed to quantitatively describe, at atomic resolution, the energetics and dynamics of cosolute-protein interactions in terms of a concentration normalized equilibrium average of the interspin distance, [Formula: see text], and an effective correlation time, τ_c The system studied is the metastable drkN SH3 domain, which exists in dynamic equilibrium between native and unfolded states, thereby permitting us to probe the interactions of cosolutes with both states simultaneously under the same conditions. Two paramagnetic cosolute denaturants were investigated, one neutral and the other negatively charged, differing in the presence of a carboxyamide group versus a carboxylate. Our results demonstrate that attractive cosolute-protein backbone interactions occur largely in the unfolded state and some loop regions in the native state, electrostatic interactions reduce the [Formula: see text] values, and temperature predominantly impacts interactions with the unfolded state. Thus, destabilization of the native state in this instance arises predominantly as a consequence of interactions of the cosolutes with the unfolded state.

Effects of the Hofmeister anion series salts on the rheological properties of Sesbania cannabina galactomannan

Sesbania cannabina galactomannan (2%) solutions added with strongly hydrated ions (Na₂CO₃, NaH₂PO₄, NaCl) and weakly hydrated ions (NaNO₃) at different ionic strengths were rheologically characterized. The four selected salts dramatically decreased the intrinsic viscosity of galactomannan solution in the following order of effectiveness: Na₂CO₃ < NaH₂PO₄ < NaCl < NaNO₃. This conforms effectively to the Hofmeister anion series. Moreover, salt addition increased the viscosity of galactomannan solution when the ionic strength was 1 mmol/kg, which related to an increased occurrence of intermolecular interactions. As increasing ionic strength, galactomannan chains may tend to contract or expand due to the presence of strongly or weakly hydrated ions, thereby decreasing the viscosity. These phenomena were demonstrated by zeta potential measurement and again observed in dynamic viscoelasticity measurement. Overall, this property can be used to manipulate the rheological properties of galactomannan in food gums to obtain gums of high quality for enhancing consumer goods.

Aqueous Two-Phase Systems and Microfluidics for Microscale Assays and Analytical Measurements

Phase separation is a common occurrence in nature. Synthetic and natural polymers, salts, ionic liquids, surfactants, and biomacromolecules phase separate in water, resulting in an aqueous two-phase system (ATPS). This review discusses the properties, handling, and uses of ATPSs. These systems have been used for protein, nucleic acid, virus, and cell purification and have in recent years found new uses for small organics, polysaccharides, extracellular vesicles, and biopharmaceuticals. Analytical biochemistry applications such as quantifying protein-protein binding, probing for conformational changes, or monitoring enzyme activity have been performed with ATPSs. Not only are ATPSs biocompatible, they also retain their properties at the microscale, enabling miniaturization experiments such as droplet microfluidics, bacterial quorum sensing, multiplexed and point-of-care immunoassays, and cell patterning. ATPSs include coacervates and may find wider interest in the context of intracellular phase separation and origin of life. Recent advances in fundamental understanding and in commercial application are also considered.

Mining for Perchlorate Resistance Genes in Microorganisms From Sediments of a Hypersaline Pond in Atacama Desert, Chile

Perchlorate is an oxidative pollutant toxic to most of terrestrial life by promoting denaturation of macromolecules, oxidative stress, and DNA damage. However, several microorganisms, especially hyperhalophiles, are able to tolerate high levels of this compound. Furthermore, relatively high quantities of perchlorate salts were detected on the Martian surface, and due to its strong hygroscopicity and its ability to substantially decrease the freezing point of water, perchlorate is thought to increase the availability of liquid brine water in hyper-arid and cold environments, such as the Martian regolith. Therefore, perchlorate has been proposed as a compound worth studying to better understanding the habitability of the Martian surface. In the present work, to study the molecular mechanisms of perchlorate resistance, a functional metagenomic approach was used, and for that, a small-insert library was constructed with DNA isolated from microorganisms exposed to perchlorate in sediments of a hypersaline pond in the Atacama Desert, Chile (Salar de Maricunga), one of the regions with the highest levels of perchlorate on Earth. The metagenomic library was hosted in Escherichia coli DH10B strain and exposed to sodium perchlorate. This technique allowed the identification of nine perchlorate-resistant clones and their environmental DNA fragments were sequenced. A total of seventeen ORFs were predicted, individually cloned, and nine of them increased perchlorate resistance when expressed in E. coli DH10B cells. These genes encoded hypothetical conserved proteins of unknown functions and proteins similar to other not previously reported to be involved in perchlorate resistance that were related to different cellular processes such as RNA processing, tRNA modification, DNA protection and repair, metabolism, and protein degradation. Furthermore, these genes also conferred resistance to UV-radiation, 4-nitroquinoline-N-oxide (4-NQO) and/or hydrogen peroxide (H2O2), other stress conditions that induce oxidative stress, and damage in proteins and nucleic acids. Therefore, the novel genes identified will help us to better understand the molecular strategies of microorganisms to survive in the presence of perchlorate and may be used in Mars exploration for creating perchlorate-resistance strains interesting for developing Bioregenerative Life Support Systems (BLSS) based on in situ resource utilization (ISRU).

Ion-Specific and Solvent Effects on PDADMA–PSS Complexation and Multilayer Formation

Among various parameters that influence the formation of polyelectrolyte complexes and multilayers, special emphasis should be placed on ion-specific and solvent effects. In our study, we systematically examined the above-mentioned effects on poly(diallyldimethylammonium chloride) (PDADMACl)-sodium poly(4-styrenesulfonate) (NaPSS) complexation in solution and at the surface by means of dynamic light scattering, ellipsometry and atomic force microscopy measurements. As solvents, we used water and water/ethanol mixture. The obtained results confirm the importance of ion-specific and solvent effects on complexes prepared in solution, as well as on multilayers built up on a silica surface. The experiments in mixed solvent solution showed that at a higher ethanol mole fraction, the decrease in monomer titrant to titrand ratio, at which the increase in the size of complexes is observed, takes place. The difference between chloride and bromide ions was more pronounced at a higher mole fraction of ethanol and in the case of positive complex formation, suggesting that the larger amount of bromide ions could be condensed to the polycation chain. These findings are in accordance with the results we obtained for polyelectrolyte multilayers and could be helpful for designing polyelectrolyte multilayers with tuned properties needed for various applications, primarily in the field of biomedicine.

Probing Interfacial Effects on Ionization Energies: The Surprising Banality of Anion-Water Hydrogen Bonding at the Air/Water Interface

Liquid microjet photoelectron spectroscopy is an increasingly common technique to measure vertical ionization energies (VIEs) of aqueous solutes, but the interpretation of these experiments is subject to questions regarding sensitivity to bulk versus interfacial solvation environments. We have computed aqueous-phase VIEs for a set of inorganic anions, using a combination of molecular dynamics simulations and electronic structure calculations, with results that are in excellent agreement with experiment regardless of whether the simulation data are restricted to ions at the air/water interface or to those in bulk aqueous solution. Although the computed VIEs are sensitive to ion-water hydrogen bonding, we find that the short-range solvation structure is sufficiently similar in both environments that it proves impossible to discriminate between the two on the basis of the VIE, a conclusion that has important implications for the interpretation of liquid-phase photoelectron spectroscopy. More generally, analysis of the simulation data suggests that the surface activity of soft anions is largely a second or third solvation shell effect, arising from disruption of water-water hydrogen bonds and not from significant changes in first-shell anion-water hydrogen bonding.

Insight into the Ionizing Surface Potential Method and Aqueous Sodium Halide Surfaces

Complementing the microscopic picture of the surface structure of electrolyte solutions set out by previous theoretical and experimental studies, the ionizing surface potential technique offers a unique approach to quantifying the impact of aqueous inorganic ions upon the interfacial electric field of the air-aqueous interface. In this Feature Article, we review the vulnerability of theoretical and empirically derived χ_water values as a normative reference for aqueous ion surface potentials. Instead, we recognize and evaluate aqueous ion surface potentials relative to well-known ionic surfactants cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS). Additionally, we also explore factors that impact the magnitude of the measured surface potentials using the ionizing method, particularly in the type of reference electrode and ionizing gas environment. With potential measurements of sodium halide solutions, we show that iodide has a dominant effect on the air-aqueous electric field. Compared to chloride and bromide, iodide is directly observed with a net negatively charged surface electric field at all salt concentrations measured (0.2 to 3.0 mol/kg water). Also, above the 2 M region, bromide is observed with a net negatively charged surface. Although several scenarios contribute to this effect, it is most likely due to the surface enrichment of bromide and iodide. While the results of this study are pertinent to determining the specific interfacial reactivity of aqueous halides, these anions seldom transpire as single-halide systems in the natural environment. Therefore, we also provide an outlook on future research concerning surface potential methods and more complex aqueous electrolyte systems.

Water at charged interfaces

The ubiquity of aqueous solutions in contact with charged surfaces and the realization that the molecular-level details of water-surface interactions often determine interfacial functions and properties relevant in many natural processes have led to intensive research. Even so, many open questions remain regarding the molecular picture of the interfacial organization and preferential alignment of water molecules, as well as the structure of water molecules and ion distributions at different charged interfaces. While water, solutes and charge are present in each of these systems, the substrate can range from living tissues to metals. This diversity in substrates has led to different communities considering each of these types of aqueous interface. In this Review, by considering water in contact with metals, oxides and biomembranes, we show the essential similarity of these disparate systems. While in each case the classical mean-field theories can explain many macroscopic and mesoscopic observations, it soon becomes apparent that such theories fail to explain phenomena for which molecular properties are relevant, such as interfacial chemical conversion. We highlight the current knowledge and limitations in our understanding and end with a view towards future opportunities in the field.

Effects of molecular shape on alcohol aggregation and water hydrogen bond network behavior in butanol isomer solutions

Despite butanol isomers such as n-butanol, sec-butanol, isobutanol and tert-butanol having the same chemical formula, their liquid-liquid phase diagrams are distinct. That is, tert-butanol is miscible in water at all concentrations, while the other three butanol isomers are partially miscible under ambient conditions. The molecular shape of tert-butanol is close to globular and differs from the other three butanol molecules with a relatively long carbon chain. By performing molecular dynamics simulations and graph theoretical analysis of the four water-butanol isomer mixtures at varying concentrations, we show how distinct butanol aggregates are formed which depend upon the molecular shape and affect the water H-bond network structure and phase diagram in the binary liquid. The three butanol isomers of n-butanol, sec-butanol and isobutanol at concentrated solutions form chain-like alcohol aggregates, but tert-butanol forms small aggregates due to the distinct packing behavior caused by its globular molecular shape. By employing the graph theoretical analysis such as the degree distribution and the eigenvalue spectrum from the adjacency matrix in the graphical representation of the alcohol H-bond network, we show that the tert-butanol aggregates have a different morphological structure from that of the other three butanol isomers in aqueous solution. The graph theoretically distinct butanol aggregates are categorized into two groups, water-compatible and water-incompatible, depending upon the interaction between the alcohol and water molecules. Based upon our observations, we propose that the water-incompatible networks of n-butanol, sec-butanol and isobutanol aggregates do not change the water structure significantly, forming two separate liquid phases that are alcohol-rich and water-rich. However, the water-compatible network of tert-butanol aggregates has a considerable interaction with the water molecules and causes significant disruption of the water H-bond network, forming a homogeneous solution. Understanding the alcohol aggregation behavior and water structure in butanol-water mixtures provides a critical clue in appreciating fundamental issues such as miscibility and phase separation in aqueous solution systems.

Opposite Regulatory Effects of Immobilized Cations on the Folding Vs. Assembly of Melittin

Ions are crucial in modulating the protein structure. For the free ions in bulk solution, ammonium is kosmotropic (structure forming) and guanidinium is chaotropic (structure breaking) to the protein structure within the Hofmeister series. However, the effect of immobilized ions on a protein surface is less explored. Herein, we explored the influence of two immobilized cations (ammonium in the side chain of lysine and guanidinium in the side chain of arginine) on the folding and assembly of melittin. Melittin adopts an α-helix structure and is driven by hydrophobic interactions to associate into a helical bundle. To test the influence of immobilized cations on the peptide structure, we designed the homozygous mutants exclusively containing ammonium (melittin-K) or guanidinium (melittin-R) and compared the differences of melittin-K vs. melittin-R in their folding, assembly, and molecular functions. The side chains of lysine and arginine differ in their influences on the folding and assembly of melittin. Specifically, the side chain of R increases the α-helical propensity of melittin relative to that of K, following an inverse Hofmeister series. In contrast, the side chain of K favors the assembly of melittin relative to the side chain of R in line with a direct Hofmeister series. The opposite regulatory effects of immobilized cations on the folding and assembly of melittin highlight the complexity of the noncovalent interactions that govern protein intermolecular architecture.

Characterizing the Interplay between Polymer Solvation and Conformation

Conformational transitions of flexible molecules, especially those driven by hydrophobic effects, tend to be hindered by desolvation barriers. For such transitions, it is thus important to characterize and understand the interplay between solvation and conformation. Using specialized molecular simulations, here we perform such a characterization for a hydrophobic polymer solvated in water. We find that an external potential, which unfavorably perturbs the polymer hydration waters, can trigger a coil-to-globule or collapse transition, and that the relative stabilities of the collapsed and extended states can be quantified by the strength of the requisite potential. Our results also provide mechanistic insights into the collapse transition, highlighting that the bottleneck to polymer collapse is the formation of a sufficiently large cluster, and the collective dewetting of such a cluster. We also study the collapse of the hydrophobic polymer in octane, a nonpolar solvent, and interestingly, we find that the mechanistic details of the transition are qualitatively similar to that in water.

Free Energies of Hydrated Halide Anions: High Through-Put Computations on Clusters to Treat Rough Energy-Landscapes

With a longer-term goal of addressing the comparative behavior of the aqueous halides F−, Cl−, Br−, and I− on the basis of quasi-chemical theory (QCT), here we study structures and free energies of hydration clusters for those anions. We confirm that energetically optimal (H2O)nX clusters, with X = Cl−, Br−, and I−, exhibit surface hydration structures. Computed free energies, based on optimized surface hydration structures utilizing a harmonic approximation, typically (but not always) disagree with experimental free energies. To remedy the harmonic approximation, we utilize single-point electronic structure calculations on cluster geometries sampled from an AIMD (ab initio molecular dynamics) simulation stream. This rough-landscape procedure is broadly satisfactory and suggests unfavorable ligand crowding as the physical effect addressed. Nevertheless, this procedure can break down when n≳4, with the characteristic discrepancy resulting from a relaxed definition of clustering in the identification of (H2O)nX clusters, including ramified structures natural in physical cluster theories. With ramified structures, the central equation for the present rough-landscape approach can acquire some inconsistency. Extension of these physical cluster theories in the direction of QCT should remedy that issue, and should be the next step in this research direction.

Solvent Effects in Supramolecular Chemistry: Linear Free Energy Relationships for Common Intermolecular Interactions

The proper choice of solvent is of major importance for all studies in supramolecular chemistry, including molecular recognition in host-guest systems, intramolecular folding, self-assembly, and supramolecular polymerization. In this Perspective, the usefulness of linear free energy relationships (LFERs) is highlighted to unravel the effect of solvents on coordinate bonding (e.g., cation-crown ether), hydrogen bonding, halogen bonding, dipolar aggregation, and π-π-stacking. For all of these intermolecular interactions widely applied in supramolecular systems, LFER relationships between the Gibbs binding energies and common solvent polarity scales including E_T(30), π*, α or β based on solvatochromic dyes, scales derived from binding processes such as Gutmann donor and acceptor numbers or hydrogen bond donor and acceptor scales, or physical functions like the Kirkwood-Onsager or the Liptay-Onsager functions could be demonstrated. These relationships can now be applied toward a better understanding of the prevailing intermolecular forces for supramolecular interactions. They further enable a rational selection of the most suitable solvent for the preparation of self-assembled materials and the estimation of binding constants without the need for time-consuming comprehensive investigations of solvents.

Experimental approaches for investigating ion atmospheres around nucleic acids and proteins

Ionic interactions are crucial to biological functions of DNA, RNA, and proteins. Experimental research on how ions behave around biological macromolecules has lagged behind corresponding theoretical and computational research. In the 21st century, quantitative experimental approaches for investigating ionic interactions of biomolecules have become available and greatly facilitated examinations of theoretical electrostatic models. These approaches utilize anomalous small-angle X-ray scattering, atomic emission spectroscopy, mass spectrometry, or nuclear magnetic resonance (NMR) spectroscopy. We provide an overview on the experimental methodologies that can quantify and characterize ions within the ion atmospheres around nucleic acids, proteins, and their complexes.

Weak Anion Binding to Poly(N-isopropylacrylamide) Detected by Electrophoretic NMR

Ion specific effects are ubiquitous in solutions and govern a large number of colloidal phenomena. To date, a substantial and sustained effort has been directed at understanding the underlying molecular interactions. As a new approach, we address this issue by sensitive 1H NMR methods that measure the electrophoretic mobility and the self-diffusion coefficient of poly(N-isopropylacrylamide) (PNIPAM) chains in bulk aqueous solution in the presence of salts with the anion component varied from kosmotropes to chaotropes along the Hofmeister series. The accuracy of the applied electrophoretic NMR experiments is exceptionally high, on the order of 10-10 m2/(V s), corresponding to roughly 10-4 elementary charges per monomer effectively associated with the neutral polymer. We find that chaotropic anions associate to PNIPAM with an apparent Langmuir-type saturation behavior. The polymer chains remain extended upon ion association, and momentum transfer from anion to polymer is only partial which indicates weak attractive short-range forces between anion and polymer and, thereby and in contrast to some other ion-polymer systems, the lack of well-defined binding sites.

Influence of Salt on the Self-Organization in Solutions of Star-Shaped Poly-2-alkyl-2-oxazoline and Poly-2-alkyl-2-oxazine on Heating

The water-salt solutions of star-shaped six-arm poly-2-alkyl-2-oxazines and poly-2-alkyl-2-oxazolines were studied by light scattering and turbidimetry. The core was hexaaza[26]orthoparacyclophane and the arms were poly-2-ethyl-2-oxazine, poly-2-isopropyl-2-oxazine, poly-2-ethyl-2-oxazoline, and poly-2-isopropyl-2-oxazoline. NaCl and N-methylpyridinium p-toluenesulfonate were used as salts. Their concentration varied from 0-0.154 M. On heating, a phase transition was observed in all studied solutions. It was found that the effect of salt on the thermosensitivity of the investigated stars depends on the structure of the salt and polymer and on the salt content in the solution. The phase separation temperature decreased with an increase in the hydrophobicity of the polymers, which is caused by both a growth of the side radical size and an elongation of the monomer unit. For NaCl solutions, the phase separation temperature monotonically decreased with growth of salt concentration. In solutions with methylpyridinium p-toluenesulfonate, the dependence of the phase separation temperature on the salt concentration was non-monotonic with minimum at salt concentration corresponding to one salt molecule per one arm of a polymer star. Poly-2-alkyl-2-oxazine and poly-2-alkyl-2-oxazoline stars with a hexaaza[26]orthoparacyclophane core are more sensitive to the presence of salt in solution than the similar stars with a calix[n]arene branching center.

Cation-amino acid interactions: Implications for protein destabilization

The mechanism for protein stabilization or destabilization has long been an open quest. In the present study, we have studied the interactions between amino acids and guanidinium (Gdm⁺)/ammonium (NH₄⁺) ions by using low field nuclear magnetic resonance (LF-NMR), where Gdm⁺ and NH₄⁺ are denaturant and stabilizer for proteins, respectively. It shows that Gdm⁺ favors to bind to the thiol group or the hydroxyl group on the side chain but weakly interacts with the α-carboxyl group. In contrast, NH₄⁺ prefers to bind to the α-carboxyl group but slightly interacts with the thiol group or the hydroxyl group on the side chain of amino acids. ¹HNMR reveals the hydrogen bonding between NH₄⁺ and the α-carboxyl group, which is not involved in the interactions between Gdm⁺ and cysteine. Our study demonstrates that the strong interactions between the denaturant and the sulfur atom or the disulfide bond promote the direct binding of the denaturant toward proteins, leading to the destabilization.

Specific Anion Effects on Charged-Neutral Random Copolymers: Interplay between Different Anion-Polymer Interactions

The study of ion specificities of charged-neutral random copolymers is of great importance for understanding specific ion effects on natural macromolecules. In the present work, we have investigated the specific anion effects on the thermoresponsive behavior of poly([2-(methacryloyloxy)ethyl trimethylammonium chloride]-co-N-isopropylacrylamide) [P(METAC-co-NIPAM)] random copolymers. Our study demonstrates that the anion specificities of the P(METAC-co-NIPAM) copolymers are dependent on their chemical compositions. The specific anion effects on the copolymers with high mole fractions of poly(N-isopropylacrylamide) (PNIPAM) are similar to those on the PNIPAM homopolymer. As the mole fraction of PNIPAM decreases to a certain value, a V-shaped anion series can be observed in terms of the anion-specific cloud point temperature of the copolymer, as induced by the interplay between different anion-polymer interactions. Our study also suggests that both the direct and the indirect anion-polymer interactions contribute to the anion specificities of the copolymers. This work would improve our understanding of the relationship between the ion specificities and the ion-macromolecule interactions for naturally occurring macromolecules.

Contact Ion Pairs in the Bulk Affect Anion Interactions with Poly(N-isopropylacrylamide)

Salt effects on the solubility of uncharged polymers in aqueous solutions are usually dominated by anions, while the role of the cation with which they are paired is often ignored. In this study, we examine the influence of three aqueous metal iodide salt solutions (LiI, NaI, and CsI) on the phase transition temperature of poly(N-isopropylacrylamide) (PNIPAM) by measuring the turbidity change of the solutions. Weakly hydrated anions, such as iodide, are known to interact with the polymer and thereby lead to salting-in behavior at low salt concentration followed by salting-out behavior at higher salt concentration. When varying the cation type, an unexpected salting-out trend is observed at higher salt concentrations, Cs⁺ > Na⁺ > Li⁺. Using molecular dynamics simulations, it is demonstrated that this originates from contact ion pair formation in the bulk solution, which introduces a competition for iodide ions between the polymer and cations. The weakly hydrated cation, Cs⁺, forms contact ion pairs with I^- in the bulk solution, leading to depletion of CsI from the polymer-water interface. Microscopically, this is correlated with the repulsion of iodide ions from the amide moiety.

Salt-Induced Liquid-Liquid Phase Separation: Combined Experimental and Theoretical Investigation of Water-Acetonitrile-Salt Mixtures

Salt-induced liquid-liquid phase separation in liquid mixtures is a common phenomenon in nature and in various applications, such as in separation and extraction of chemicals. Here, we present results of a systematic investigation of the phase behaviors in water-acetonitrile-salt mixtures using a combination of experiment and theory. We obtain complete ternary phase diagrams for nine representative salts in water-acetonitrile mixtures by cloud point and component analysis. We construct a thermodynamic free energy model by accounting for the nonideal mixing of the liquids, ion hydration, electrostatic interactions, and Born energy. Our theory yields phase diagrams in good agreement with the experimental data. By comparing the contributions due to the electrostatic interaction, Born energy, and hydration, we find that hydration is the main driving force for the liquid-liquid separation and is a major contributor to the specific ion effects. Our theory highlights the important role of entropy in the hydration driving force. We discuss the implications of our findings in the context of salting-out assisted liquid-liquid extraction and make suggestions for selecting salt ions to optimize the separation performance.

Self-Assembly of Silk-like Protein into Nanoscale Bicontinuous Networks under Phase-Separation Conditions

Liquid-liquid phase separation of biomacromolecules is crucial in various inter- and extracellular biological functions. This includes formation of condensates to control, e.g., biochemical reactions and structural assembly. The same phenomenon is also found to be critically important in protein-based high-performance biological materials. Here, we use a well-characterized model triblock protein system to demonstrate the molecular level formation mechanism and structure of its condensate. Large-scale molecular modeling supported by analytical ultracentrifuge characterization combined with our earlier high magnification precision cryo-SEM microscopy imaging leads to deducing that the condensate has a bicontinuous network structure. The bicontinuous network rises from the proteins having a combination of sites with stronger mutual attraction and multiple weakly attractive regions connected by flexible, multiconfigurational linker regions. These attractive sites and regions behave as stickers of varying adhesion strength. For the examined model triblock protein construct, the β-sheet-rich end units are the stronger stickers, while additional weaker stickers, contributing to the condensation affinity, rise from spring-like connections in the flexible middle region of the protein. The combination of stronger and weaker sticker-like connections and the flexible regions between the stickers result in a versatile, liquid-like, self-healing structure. This structure also explains the high flexibility, easy deformability, and diffusion of the proteins, decreasing only 10-100 times in the bicontinuous network formed in the condensate phase in comparison to dilute protein solution. The here demonstrated structure and condensation mechanism of a model triblock protein construct via a combination of the stronger binding regions and the weaker, flexible sacrificial-bond-like network as well as its generalizability via polymer sticker models provide means to not only understand intracellular organization, regulation, and cellular function but also to identify direct control factors for and to enable engineering improved protein and polymer constructs to enhance control of advanced fiber materials, smart liquid biointerfaces, or self-healing matrices for pharmaceutics or bioengineering materials.

Assessing the Effect of Hofmeister Anions on the Hydrogen-Bonding Strength of Water via Nitrile Stretching Frequency Shift

The temperature dependence of the peak frequency (ν_max) of the C≡N stretching vibrational spectrum of a hydrogen-bonded C≡N species is known to be a qualitative measure of its hydrogen-bonding strength. Herein, we show that within a two-state framework, this dependence can be analyzed in a more quantitative manner to yield the enthalpy and entropy changes (ΔH_HB and ΔS_HB) for the corresponding hydrogen-bonding interactions. Using this method, we examine the effect of ten common anions on the strength of the hydrogen-bond(s) formed between water and the C≡N group of an unnatural amino acid, p-cyanophenylalanine (Phe_CN). We find that based on the ΔH_HB values, these anions can be arranged in the following order: HPO₄^2- > OAc^- > F^- > SO₄^2- ≈ Cl^- ≈ (H₂O) ≈ ClO₄^- ≈ NO₃^- > Br^- > SCN^- ≈ I^-, which differs from the corresponding Hofmeister series. Because Phe_CN has a relatively small size, the finding that anions having very different charge densities (e.g., SO₄^2- and ClO₄^-) act similarly suggests that this ranking order is likely the result of specific ion effects. Since proteins contain different backbone and side-chain units, our results highlight the need to assess their individual contributions toward the overall Hofmeister effect in order to achieve a microscopic understanding of how ions affect the physical and chemical properties of such macromolecules. In addition, the analytical method described in the present study is applicable for analyzing the spectral evolution of any vibrational spectra composed of two highly overlapping bands.

A cosolvent surfactant mechanism affects polymer collapse in miscible good solvents

The coil-globule transition of aqueous polymers is of profound significance in understanding the structure and function of responsive soft matter. In particular, the remarkable effect of amphiphilic cosolvents (e.g., alcohols) that leads to both swelling and collapse of stimuli-responsive polymers has been hotly debated in the literature, often with contradictory mechanisms proposed. Using molecular dynamics simulations, we herein demonstrate that alcohols reduce the free energy cost of creating a repulsive polymer-solvent interface via a surfactant-like mechanism which surprisingly drives polymer collapse at low alcohol concentrations. This hitherto neglected role of interfacial solvation thermodynamics is common to all coil-globule transitions, and rationalizes the experimentally observed effects of higher alcohols and polymer molecular weight on the coil-to-globule transition of thermoresponsive polymers. Polymer-(co)solvent attractive interactions reinforce or compensate this mechanism and it is this interplay which drives polymer swelling or collapse.

Spider silk self-assembly via modular liquid-liquid phase separation and nanofibrillation

Spider silk fiber rapidly assembles from spidroin protein in soluble state via an incompletely understood mechanism. Here, we present an integrated model for silk formation that incorporates the effects of multiple chemical and physical gradients on the different spidroin functional domains. Central to the process is liquid-liquid phase separation (LLPS) that occurs in response to multivalent anions such as phosphate, mediated by the carboxyl-terminal and repetitive domains. Acidification coupled with LLPS triggers the swift self-assembly of nanofibril networks, facilitated by dimerization of the amino-terminal domain, and leads to a liquid-to-solid phase transition. Mechanical stress applied to the fibril structures yields macroscopic fibers with hierarchical organization and enriched for β-sheet conformations. Studies using native silk gland material corroborate our findings on spidroin phase separation. Our results suggest an intriguing parallel between silk assembly and other LLPS-mediated mechanisms, such as found in intracellular membraneless organelles and protein aggregation disorders.

Competitive specific ion effects in mixed salt solutions on a thermoresponsive polymer brush

HYPOTHESIS

Grafted poly(ethylene glycol) methyl ether methacrylate (POEGMA) copolymer brushes change conformation in response to temperature ('thermoresponse'). In the presence of different ions the thermoresponse of these coatings is dramatically altered. These effects are complex and poorly understood with no all-inclusive predictive theory of specific ion effects. As natural environments are composed of mixed electrolytes, it is imperative we understand the interplay of different ions for future applications. We hypothesise anion mixtures from the same end of the Hofmeister series (same-type anions) will exhibit non-additive and competitive behaviour.

EXPERIMENTS

The behaviour of POEGMA brushes, synthesised via surface-initiated ARGET-ATRP, in both single and mixed aqueous electrolyte solutions was characterised with ellipsometry and neutron reflectometry as a function of temperature.

FINDINGS

In mixed fluoride and chloride aqueous electrolytes (salting-out ions), or mixed thiocyanate and iodide aqueous electrolytes (salting-in ions), a non-monotonic concentration-dependent influence of the two anions on the thermoresponse of the brush was observed. A new term, δ, has been defined to quantitively describe synergistic or antagonistic behaviour. This study determined the specific ion effects imparted by salting-out ions are dependent on available solvent molecules, whereas the influence of salting-in ions is dependent on the interactions of the anions and polymer chains.

Thermoresponsive Polymers of Poly(2-(N-alkylacrylamide)ethyl acetate)s

Thermoresponsive poly(2-(N-alkylacrylamide) ethyl acetate)s with different N-alkyl groups, including poly(2-(N-methylacrylamide) ethyl acetate) (PNMAAEA), poly(2-(N-ethylacrylamide) ethyl acetate) (PNEAAEA), and poly(2-(N-propylacrylamide) ethyl acetate) (PNPAAEA), as well as poly(N-acetoxylethylacrylamide) (PNAEAA), were synthesized by solution RAFT polymerization. Unexpectedly, it was found that there are induction periods in the RAFT polymerization of these monomers, and the induction time correlates with the length of the N-alkyl groups in the monomers and follows the order of NAEAA < NMAAEA < NEAAEA < NPAAEA. The solubility of poly(2-(N-alkylacrylamide) ethyl acetate)s in water is also firmly dependent on the length of the N-alkyl groups. PNPAAEA including the largest N-propyl group is insoluble in water, whereas PNMAAEA and PNEAAEA are thermoresponsive in water and undergo the reversible soluble-to-insoluble transition at a critical solution temperature. The cloud point temperature (Tcp) of the thermoresponsive polymers is in the order of PNEAAEA < PNAEAA < PNMAAEA. The parameters affecting the Tcp of thermoresponsive polymers, e.g., degree of polymerization (DP), polymer concentration, salt, urea, and phenol, are investigated. Thermoresponsive PNMAAEA-b-PNEAAEA block copolymer and PNMAAEA-co-PNEAAEA random copolymers with different PNMAAEA and/or PNEAAEA fractions are synthesized, and their thermoresponse is checked.

Hofmeister Ions Modulate the Autocatalytic Amyloidogenesis of an Intrinsically Disordered Functional Amyloid Domain via Unusual Biphasic Kinetics

Hofmeister ions are thought to play fundamentally important roles in protein solubility, folding, stability, and function. Salt ions profoundly influence the course of protein misfolding, aggregation, and amyloid formation associated with devastating human diseases. However, the molecular origin of the salt-effect in protein aggregation remains elusive. Here, we report an unusual biphasic amyloidogenesis of a pH-responsive, intrinsically disordered, oligopeptide repeat domain of a melanosomal protein, Pmel17, that regulates the amyloid-assisted melanin synthesis in mammals via functional amyloid formation. We demonstrate that a symphony of molecular events involving charge-peptide interactions and hydration, in conjunction with secondary phenomena, critically governs the course of this biphasic amyloid assembly. We show that at mildly acidic pH, typical of melanosomes, highly amyloidogenic oligomeric units assemble into metastable, dendritic, fractal networks following the forward Hofmeister series. However, the subsequent condensation of fractal networks via conformational maturation into amyloid fibrils follows an inverse Hofmeister series due to fragmentation events coupled with secondary nucleation processes. Our results indicate that ions exert a strong influence on the aggregation kinetics as well as on the nanoscale morphology and also modulate the autocatalytic amplification processes during amyloid assembly via an intriguing dual Hofmeister effect. This unique interplay of molecular drivers will be of prime importance in delineating the aggregation pathways of a multitude of intrinsically disordered proteins involved in physiology and disease.

Anaplerotic Pathways in Halomonas elongata: The Role of the Sodium Gradient

Salt tolerance in the γ-proteobacterium Halomonas elongata is linked to its ability to produce the compatible solute ectoine. The metabolism of ectoine production is of great interest since it can shed light on the biochemical basis of halotolerance as well as pave the way for the improvement of the biotechnological production of such compatible solute. Ectoine belongs to the biosynthetic family of aspartate-derived amino-acids. Aspartate is formed from oxaloacetate, thereby connecting ectoine production to the anaplerotic reactions that refill carbon into the tricarboxylic acid cycle (TCA cycle). This places a high demand on these reactions and creates the need to regulate them not only in response to growth but also in response to extracellular salt concentration. In this work, we combine modeling and experiments to analyze how these different needs shape the anaplerotic reactions in H. elongata. First, the stoichiometric and thermodynamic factors that condition the flux distributions are analyzed, then the optimal patterns of operation for oxaloacetate production are calculated. Finally, the phenotype of two deletion mutants lacking potentially relevant anaplerotic enzymes: phosphoenolpyruvate carboxylase (Ppc) and oxaloacetate decarboxylase (Oad) are experimentally characterized. The results show that the anaplerotic reactions in H. elongata are indeed subject to evolutionary pressures that differ from those faced by other gram-negative bacteria. Ectoine producing halophiles must meet a higher metabolic demand for oxaloacetate and the reliance of many marine bacteria on the Entner-Doudoroff pathway compromises the anaplerotic efficiency of Ppc, which is usually one of the main enzymes fulfilling this role. The anaplerotic flux in H. elongata is contributed not only by Ppc but also by Oad, an enzyme that has not yet been shown to play this role in vivo. Ppc is necessary for H. elongata to grow normally at low salt concentrations but it is not required to achieve near maximal growth rates as long as there is a steep sodium gradient. On the other hand, the lack of Oad presents serious difficulties to grow at high salt concentrations. This points to a shared role of these two enzymes in guaranteeing the supply of oxaloacetate for biosynthetic reactions.

Cation Specific Effects on the Domain-Domain Interaction of Heterogeneous Dimeric Protein Revealed by FRET Analysis

Specific monovalent cation effects on the domain-domain interaction of heterogeneous dimeric protein were investigated using green fluorescent protein (GFP)-glutathione-s-transferase (GST) fusion protein as a model protein. Conjugating N-terminal of GST domain with a fluorescence probe Cyanine3, complementary increase and decrease of fluorescence intensities of Cyanine3 and GFP were recognized on the exclusive excitation of GFP and further the fluorescence decay of GFP was remarkably accelerated to show that an excellent Förster type of resonance excitation energy transfer (FRET) pair was constructed between GFP- and GST-domain. The spectral overlap integral and critical distance of the FRET pair were estimated to be 5.96×10¹³ M^-1cm³ and 62.5 Å, respectively. The FRET rate and efficiency evaluated by fluorescence lifetime of the energy donor, GFP, were influenced by the monovalent cations included in the buffer solution to suggest that the domain-domain interactions of GFP-GST fusion protein would be susceptible to cation species and their concentrations. The order affecting the domain-domain interaction was estimated to be Li⁺>NH₄⁺ >Na⁺>K⁺>Cs⁺, almost corresponding to the reverse Hofmeister series.

Specific Buffer Effects on the Intermolecular Interactions among Protein Molecules at Physiological pH

BSA and lysozyme molecular motion at pH 7.15 is buffer-specific. Adsorption of buffer ions on protein surfaces modulates the protein surface charge and thus protein-protein interactions. Interactions were estimated by means of the interaction parameter k_D obtained from plots of diffusion coefficients at different protein concentrations (D_app = D₀[1 + k_DC_protein]) via dynamic light scattering and nuclear magnetic resonance. The obtained results agree with recent findings confirming doubts regarding the validity of the Henderson-Hasselbalch equation, which has traditionally provided a basis for understanding pH buffers of primary importance in solution chemistry, electrochemistry, and biochemistry.