Limits of detection for time of flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS): detection of low amounts of adsorbed protein

Use of synthetic single-stranded oligonucleotides as artificial test soiling for validation of surgical instrument cleaning processes

Surgical instruments are often strongly contaminated with patients' blood and tissues, possibly containing pathogens. The reuse of contaminated instruments without adequate cleaning and sterilization can cause postoperative inflammation and the transmission of infectious diseases from one patient to another. Thus, based on the stringent sterility requirements, the development of highly efficient, validated cleaning processes is necessary. Here, we use for the first time synthetic single-stranded DNA (ssDNA_ODN), which does not appear in nature, as a test soiling to evaluate the cleaning efficiency of routine washing processes. Stainless steel test objects were coated with a certain amount of ssDNA_ODN. After cleaning, the amount of residual ssDNA_ODN on the test objects was determined using quantitative real-time PCR. The established method is highly specific and sensitive, with a detection limit of 20 fg, and enables the determination of the cleaning efficiency of medical cleaning processes under different conditions to obtain optimal settings for the effective cleaning and sterilization of instruments. The use of this highly sensitive method for the validation of cleaning processes can prevent, to a significant extent, the insufficient cleaning of surgical instruments and thus the transmission of pathogens to patients.

Development of an hydrophobic fluoro-silica surface for studying homotypic cancer cell aggregation–disaggregation as a single dynamic process in vitro

A fluoro-silica surface has been shown to facilitate the study of cancer cell aggregate–disaggregation as a single dynamic process.

Antibacterial activity studies of plasma polymerised cineole films

Costs associated with bacterial infections in medical devices exceed $US 30 billion each year in the United States alone due to device revisions and patient treatment.

Sample processing, protocol, and statistical analysis of the time-of-flight secondary ion mass spectrometry (ToF-SIMS) of protein, cell, and tissue samples

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is increasingly being used in analysis of biological samples. For example, it has been applied to distinguish healthy and osteoarthritic human cartilage. This chapter discusses ToF-SIMS principle and instrumentation including the three modes of analysis in ToF-SIMS. ToF-SIMS sets certain requirements for the samples to be analyzed; for example, the samples have to be vacuum compatible. Accordingly, sample processing steps for different biological samples, i.e., proteins, cells, frozen and paraffin-embedded tissues and extracellular matrix for the ToF-SIMS are presented. Multivariate analysis of the ToF-SIMS data and the necessary data preprocessing steps (peak selection, data normalization, mean-centering, and scaling and transformation) are discussed in this chapter.

Sodium dodecyl sulfate adsorption onto positively charged surfaces: monolayer formation with opposing headgroup orientations

The adsorption and structure of sodium dodecyl sulfate (SDS) layers onto positively charged films have been monitored in situ with vibrational sum-frequency-generation (SFG) spectroscopy and surface plasmon resonance (SPR) sensing. Substrates with different charge densities and polarities used in these studies include CaF2 at different pH values as well as allylamine and heptylamine films deposited onto CaF2 and Au substrates by radio frequency glow discharge deposition. The SDS films were adsorbed from aqueous solutions ranging in concentration from 0.067 to 20 mM. In general the SFG spectra exhibited well resolved CH and OH peaks. However, at SDS concentrations between 1 and 8 mM the SFG CH and OH intensities decreased close to background levels. Combined data sets from molecular conformation, orientation, and order sensitive SFG with mass sensitive SPR suggest that the observed changes in SFG intensities above 0.2 mM are related to structural arrangements in the SDS layer. A model is proposed where the SFG intensity minimum between 1 and 8 mM is associated with a monolayer containing two headgroup orientations, one pointing toward the substrate and one pointing toward the solution phase. The SFG peaks observed at concentrations below 0.2 mM are dominated by the presence of adsorbed contaminants such as fatty alcohols (e.g., dodecanol), which are more surface active than SDS. As SDS solution concentration is increased above 1 mM SDS molecules are incorporated in the surface layer, with dodecanol continuing to be present in the surface layer for solution concentrations up to at least the critical micelle concentration.

Effect of surface compositional heterogeneities and microphase segregation of fluorinated amphiphilic copolymers on antifouling performance

In this paper, a series of fluorinated amphiphilic copolymers composed of 2-perfluorooctylethyl methacrylate (FMA) and 2-hydroxyethyl methacrylate (HEMA) monomers were prepared, and their surface properties and antifouling performance were investigated. Bovine serum albumin (BSA) and human plasma fibrinogen (HFg) were used as model proteins to study protein adsorption onto the fluorinated amphiphilic surfaces. All the fluorinated amphiphilic surfaces exhibit excellent resistant performance of protein adsorption measured by X-ray photoelectron spectroscopy (XPS). The surface compositional heterogeneities on the molecular scale play an important role in the antifouling properties. It was found that the copolymers exhibited better antifouling properties than the corresponding homopolymers did, when the percentage of hydrophilic hydroxyl groups is from 4% to 7% and the percentage of hydrophobic fluorinated moieties is from 4% to 14% on the surface. In addition, the protein molecular size scale and the pattern of microphase segregation domains on the surface strongly affect the protein adsorption behaviors. These results demonstrate the desirable protein-resistant performance from the fluorinated amphiphilic copolymers and provide deeper insight of the effect of surface compositional heterogeneity and microphase segregation on the protein adsorption behaviors.

Grafting of poly(ethylene glycol) on click chemistry modified Si(100) surfaces

Poly(ethylene glycol) (PEG) is one of the most extensively studied antifouling coatings due to its ability to reduce protein adsorption and improve biocompatibility. Although the use of PEG for antifouling coatings is well established, the stability and density of PEG layers are often inadequate to provide optimum antifouling properties. To improve on these shortcomings, we employed the stepwise construction of PEG layers onto a silicon surface. Acetylene-terminated alkyl monolayers were attached to nonoxidized crystalline silicon surfaces via a one-step hydrosilylation procedure with 1,8-nonadiyne. The acetylene-terminated surfaces were functionalized via a copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction of the surface-bound alkynes with an azide to produce an amine terminated layer. The amine terminated layer was then further conjugated with PEG to produce an antifouling surface. The antifouling surface properties were investigated by testing adsorption of human serum albumin (HSA) and lysozyme (Lys) onto PEG layers from phosphate buffer solutions. Detailed characterization of protein fouling was carried out with X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with principal component analysis (PCA). The results revealed no fouling of albumin onto PEG coatings whereas the smaller protein lysozyme adsorbed to a very low extent.

Image and Spectral Processing for ToF-SIMS Analysis of Biological Materials

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) instruments can rapidly produce large complex data sets. Within each spectrum, there can be hundreds of peaks. A typical 256×256 pixel image contains 65,536 spectra. If this is extended to a 3D image, the number of spectra in a given data set can reach the millions. The challenge becomes how to process these large data sets while taking into account the changes and differences between all the peaks in the spectra. This is particularly challenging for biological materials that all contain the same types of proteins and lipids, just in varying concentrations and spatial distributions. This data analysis challenge is further complicated by the limitations in the ion yield of higher mass, more chemically specific species, and potentially by the processing power of typical computers. Herein we briefly discuss analysis methodologies including univariate analysis, multivariate analysis (MVA) methods, and some of the limitations of ToF-SIMS analysis of biological materials.

Multivariate analysis of ToF-SIMS data from multicomponent systems: the why, when, and how

The use of multivariate analysis (MVA) methods in the processing of time-of-flight secondary ion mass spectrometry (ToF-SIMS) data has become increasingly more common. MVA presents a powerful set of tools to aid the user in processing data from complex, multicomponent surfaces such as biological materials and biosensors. When properly used, MVA can help the user identify the major sources of differences within a sample or between samples, determine where certain compounds exist on a sample, or verify the presence of compounds that have been engineered into the surface. Of all the MVA methods, principal component analysis (PCA) is the most commonly used and forms an excellent starting point for the application of many of the other methods employed to process ToF-SIMS data. Herein we discuss the application of PCA and other MVA methods to multicomponent ToF-SIMS data and provide guidelines on their application and use.

Protein-resistance performance enhanced by formation of highly-ordered perfluorinated alkyls on fluorinated polymer surfaces

In this paper, the relationship between the surface structure of fluorinated polymers and their protein-resistant property was studied by preparing films of poly(n-alkyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate (FMA) (PFMA(y)-ec-PnAMA(x)-ec-PFMA(y)) with various ordered structures of perfluorinated alkyls. These fluorinated polymers were synthesized via a controlled/living atom-transfer radical polymerization (ATRP) method. Both the surface free energy and the CF(3)/CF(2) ratio obtained by X-ray photoelectron spectroscopy (XPS) were employed to scale the ordered structures of the perfluorinated alkyls. Protein adsorption studies using fibrinogen as a test molecule were undertaken on the various films by XPS. The results show that the adsorbed mass of fibrinogen decreased linearly with increasing CF(3)/CF(2) ratio on the fluorinated polymer surfaces. When the CF(3)/CF(2) ratio reaches 0.26, there was almost no fibrinogen adsorption. This work not only demonstrates the design of a fluorinated copolymer film on glass substrate with desirable protein-resistant performance, but also provides a fundamental understanding of how the orientation of perfluoroalkyl side chains affects protein-resistant behavior on fluorinated surfaces.

Electrolysis-assisted sonication for removal of proteinaceous contamination from surgical grade stainless steel

BACKGROUND

Current methods used for the detection of residual proteinaceous contamination vary in sensitivity and specificity. This is of concern because it increases the risk for transmission of neurodegenerative diseases such as spongiform encephalopathies.

AIM

To determine the effectiveness of electrolysis-assisted sonication (EAS) for removing residual proteinaceous contamination from surgical grade stainless steel.

METHODS

EAS was used to clean surgical grade 316L stainless steel that had been contaminated with the protein bovine serum albumin. Using nitrogen, an abundant element in proteins, as a marker for the presence of protein, X-ray photoelectron spectroscopy (XPS) was used to quantify the amount of protein remaining on the substrate surface. Cathodic, anodic and dual polarization modes of EAS were investigated using 0.1% NaCl solution (w/v, in deionized water) as the electrolyte medium and 13 V as the polarization voltage.

FINDING

EAS under dual polarization was found to be the most effective method for removing the residual protein layer down to an estimated XPS detection limit of 10 ng/cm(2). Surface roughness and hardness of the stainless steel remained unchanged following EAS treatment, indicating that the procedure does not compromise the material's properties.

CONCLUSION

This relatively inexpensive and quick method of cleaning medical devices using an easily accessible salt-based electrolyte solution may offer a cost-effective strategy for cleaning medical and dental devices made of stainless steel in the future.

Molecular interactions of proteins and peptides at interfaces studied by sum frequency generation vibrational spectroscopy

Interfacial peptides and proteins are critical in many biological processes and thus are of interest to various research fields. To study these processes, surface sensitive techniques are required to completely describe different interfacial interactions intrinsic to many complicated processes. Sum frequency generation (SFG) spectroscopy has been developed into a powerful tool to investigate these interactions and mechanisms of a variety of interfacial peptides and proteins. It has been shown that SFG has intrinsic surface sensitivity and the ability to acquire conformation, orientation, and ordering information about these systems. This paper reviews recent studies on peptide/protein-substrate interactions, peptide/protein-membrane interactions, and protein complexes at interfaces and demonstrates the ability of SFG on unveiling the molecular pictures of complicated interfacial biological processes.

TOF-SIMS imaging of adsorbed proteins on topographically complex surfaces with Bi(3) (+) primary ions

Although previous studies have demonstrated that TOF-SIMS is a powerful method for the characterization of adsorbed proteins due to its specificity and surface sensitivity, it was unclear from earlier work whether the differences between proteins observed on uniform flat surfaces were large enough to facilitate clear image contrast between similar proteins in small areas on topographically complex samples that are more typical of biological tissues. The goal of this study was to determine whether Bi(3) (+) could provide sufficiently high sensitivity to provide clear identification of the different proteins in an image. In this study, 10 μm polystyrene microspheres were adsorbed with one of three different proteins, human serum albumin (HSA), bovine serum albumin (BSA), and hemoglobin. Spheres coated with HSA were then mixed with spheres coated with either BSA (a very similar protein) or hemoglobin (a dramatically different protein), and deposited on silicon substrates. Fluorescent labeling was used to verify the SIMS results. With maximum autocorrelation factors (MAF) processing, images showed clear contrast between both the very different proteins (HSA and hemoglobin) and the very similar proteins (HSA and BSA). Similar results were obtained with and without the fluorescent labels. MAF images were calculated using both the full spectrum and only characteristic amino acid fragments. Although better image contrast was obtained using the full spectrum, differences between the spheres were still evident when only the amino acid fragments were included in the analysis, suggesting that we are truly observing differences between the proteins themselves. These results demonstrate that TOF-SIMS, with a Bi(3) (+) primary ion, is a powerful technique for characterizing interfacial proteins not only on large uniform surfaces, but also with high spatial resolution on the topographically complex samples typical in biological analysis.

Stable low-fouling plasma polymer coatings on polydimethylsiloxane

Polydimethylsiloxane (DMS) is a popular material for microfluidics, but it is hydrophobic and is prone to non-specific protein adsorption. In this study, we explore methods for producing stable, protein resistant, tetraglyme plasma polymer coatings on PDMS by combining extended baking processes with multiple plasma polymer coating steps. We demonstrate that by using this approach, it is possible to produce a plasma polymer coatings that resist protein adsorption (<10 ng/cm(2)) and are stable to storage over at least 100 days. This methodology can translate to any plasma polymer system, enabling the introduction of a wide range of surface functionalities on PDMS surfaces.

Detection of nisin and fibrinogen adsorption on poly(ethylene oxide) coated polyurethane surfaces by time-of-flight secondary ion mass spectrometry (TOF-SIMS)

Stable, pendant polyethylene oxide (PEO) layers were formed on medical-grade Pellethane® and Tygon® polyurethane surfaces, by adsorption and gamma-irradiation of PEO-polybutadiene-PEO triblock surfactants. Coated and uncoated polyurethanes were challenged individually or sequentially with nisin (a small polypeptide with antimicrobial activity) and/or fibrinogen, and then analyzed with time-of-flight secondary ion mass spectrometry (TOF-SIMS). Data reduction by robust principal components analysis (PCA) allowed detection of outliers, and distinguished adsorbed nisin and fibrinogen. Fibrinogen-contacted surfaces, with or without nisin, were very similar on uncoated polymer surfaces, consistent with nearly complete displacement or coverage of previously-adsorbed nisin by fibrinogen. In contrast, nisin-loaded PEO layers remained essentially unchanged upon challenge with fibrinogen, suggesting that the adsorbed nisin is stabilized within the pendant PEO layer, while the peptide-loaded PEO layer retains its ability to repel large proteins. Coatings of PEO loaded with therapeutic polypeptides on medical polymers have the potential to be used to produce anti-fouling and biofunctional surfaces for implantable or blood-contacting devices.

Surface functionalization of thin-film diamond for highly stable and selective biological interfaces

Carbon is an extremely versatile family of materials with a wide range of mechanical, optical, and mechanical properties, but many similarities in surface chemistry. As one of the most chemically stable materials known, carbon provides an outstanding platform for the development of highly tunable molecular and biomolecular interfaces. Photochemical grafting of alkenes has emerged as an attractive method for functionalizing surfaces of diamond, but many aspects of the surface chemistry and impact on biological recognition processes remain unexplored. Here we report investigations of the interaction of functionalized diamond surfaces with proteins and biological cells using X-ray photoelectron spectroscopy (XPS), atomic force microscopy, and fluorescence methods. XPS data show that functionalization of diamond with short ethylene glycol oligomers reduces the nonspecific binding of fibrinogen below the detection limit of XPS, estimated as > 97% reduction over H-terminated diamond. Measurements of different forms of diamond with different roughness are used to explore the influence of roughness on nonspecific binding onto H-terminated and ethylene glycol (EG)-terminated surfaces. Finally, we use XPS to characterize the chemical stability of Escherichia coli K12 antibodies on the surfaces of diamond and amine-functionalized glass. Our results show that antibody-modified diamond surfaces exhibit increased stability in XPS and that this is accompanied by retention of biological activity in cell-capture measurements. Our results demonstrate that surface chemistry on diamond and other carbon-based materials provides an excellent platform for biomolecular interfaces with high stability and high selectivity.

Surface characteristics and protein adsorption on combinatorial binary Ti-M (Cr, Al, Ni) and Al-M (Ta, Zr) library films

Systematic studies of protein adsorption onto metallic biomaterial surfaces are generally lacking. Here, combinatorial binary library films with compositional gradients of Ti(1-x)Cr(x), Ti(1-x)Al(x), Ti(1-x)Ni(x) and Al(1-x)Ta(x), (0 <x < 1) and Al(1-y)Zr(y) (0 < y <0.5) as well as corresponding pure metal films were sputtered onto clean Si surfaces. Bulk and surface chemistry, film microstructure, and surface roughness were subsequently correlated to fibrinogen or albumin adsorption measured using a high throughput wavelength dispersive spectroscopy technique. X-ray diffraction revealed these binary films to have crystalline phases present primarily at either extreme of the compositional library and an amorphous zone dominating along the gradient. These mirror-like films were generally found by atomic force microscopy to have a roughness of less than 8 nm, with any relative increases in roughness consistent with the development of crystalline phases. Surface chemistry by quantitative high-resolution X-ray photoelectron spectroscopy differed significantly from bulk film composition as measured by electron microprobe, with TiO(2) and Al(2)O(3) preferentially forming on the binary film surfaces. Correspondingly, protein adsorption onto these films closely correlated with their surface oxide fractions. Aluminum deposited as either a constant-composition film or as part of a binary library consistently adsorbed the least amount of albumin and fibrinogen, with alumina-enrichment of the surface oxide correlating with this adsorption. Overall, this combinatorial materials approach coupled with high-throughput surface analytical methods provides an efficient method of screening potential metallic biomaterials that may enable as well systematic studies of surface properties driving protein adsorption on these metal / metal oxide systems.

Chemical grafting of poly(ethylene glycol) methyl ether methacrylate onto polymer surfaces by atmospheric pressure plasma processing

This article reports the use of atmospheric pressure plasma processing to induce chemical grafting of poly(ethylene glycol) methyl ether methacrylate (PEGMA) onto polystyrene (PS) and poly(methyl methacrylate) (PMMA) surfaces with the aim of attaining an adlayer conformation which is resistant to protein adsorption. The plasma treatment was carried out using a dielectric barrier discharge (DBD) reactor with PEGMA of molecular weights (MW) 1000 and 2000, PEGMA(1000) and PEGMA(2000), being grafted in a two step procedure: (1) reactive groups are generated on the polymer surface followed by (2) radical addition reactions with the PEGMA. The surface chemistry, coherency, and topography of the resulting PEGMA grafted surfaces were characterized by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and atomic force microscopy (AFM), respectively. The most coherently grafted PEGMA layers were observed for the 2000 MW PEGMA macromolecule, DBD processed at an energy dose of 105.0 J/cm(2) as indicated by ToF-SIMS images. The effect of the chemisorbed PEGMA layer on protein adsorption was assessed by evaluating the surface response to bovine serum albumin (BSA) using XPS. BSA was used as a model protein to determine the grafted macromolecular conformation of the PEGMA layer. Whereas the PEGMA(1000) surfaces showed some protein adsorption, the PEGMA(2000) surfaces appeared to absorb no measurable amount of protein, confirming the optimum surface conformation for a nonfouling surface.

In vitro assessments of nanomaterial toxicity

Nanotechnology has grown from a scientific interest to a major industry with both commodity and specialty nanomaterial exposure to global populations and ecosystems. Sub-micron materials are currently used in a wide variety of consumer products and in clinical trials as drug delivery carriers and imaging agents. Due to the expected growth in this field and the increasing public exposure to nanomaterials, both from intentional administration and inadvertent contact, improved characterization and reliable toxicity screening tools are required for new and existing nanomaterials. This review discusses current methodologies used to assess nanomaterial physicochemical properties and their in vitro effects. Current methods lack the desired sensitivity, reliability, correlation and sophistication to provide more than limited, often equivocal, pieces of the overall nanomaterial performance parameter space, particularly in realistic physiological or environmental models containing cells, proteins and solutes. Therefore, improved physicochemical nanomaterial assays are needed to provide accurate exposure risk assessments and genuine predictions of in vivo behavior and therapeutic value. Simpler model nanomaterial systems in buffer do not accurately duplicate this complexity or predict in vivo behavior. A diverse portfolio of complementary material characterization tools and bioassays are required to validate nanomaterial properties in physiology.

Reactive epoxy-functionalized thin films by a pulsed plasma polymerization process

A novel plasma functionalization process based on the pulsed plasma polymerization of allyl glycidyl ether is reported for the generation of robust and highly reactive epoxy-functionalized surfaces with well-defined chemical properties. Using a multitechnique approach including X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), infrared spectroscopy (FT-IR), atomic force microscopy (AFM) and ellipsometry, the effect of the plasma deposition parameters on the creation and retention of epoxy surface functionalities was characterized systematically. Under optimal plasma polymerization conditions (duty cycle: 1 ms/20 ms and 1 ms/200 ms), reactive uniform films with a high level of reproducibility were prepared and successfully used to covalently immobilize the model protein lysozyme. Surface derivatization was also carried out with ethanolamine to probe for epoxy groups. The ethanolamine blocked surface resisted nonspecific adsorption of lysozyme. Lysozyme immobilization was also done via microcontact printing. These results show that allyl glycidyl ether plasma polymer layers are an attractive strategy to produce a reactive epoxy functionalized surface on a wide range of substrate materials for biochip and other biotechnology applications.

Electrostatic self-assembly of PEG copolymers onto porous silica nanoparticles

A critical requirement toward the clinical use of nanocarriers in drug delivery applications is the development of optimal biointerfacial engineering procedures designed to resist biologically nonspecific adsorption events. Minimization of opsonization increases blood residence time and improves the ability to target solid tumors. We report the electrostatic self-assembly of polyethyleneimine-polyethylene glycol (PEI-PEG) copolymers onto porous silica nanoparticles. PEI-PEG copolymers were synthesized and their adsorption by self-assembly onto silica surfaces were investigated to achieve a better understanding of structure-activity relationships. Quartz-crystal microbalance (QCM) study confirmed the rapid and stable adsorption of the copolymers onto silica-coated QCM sensors driven by strong electrostatic interactions. XPS and FT-IR spectroscopy were used to analyze the coated surfaces, which indicated the presence of dense PEG layers on the silica nanoparticles. Dynamic light scattering was used to optimize the coating procedure. Monodisperse dispersions of the PEGylated nanoparticles were obtained in high yields and the thin PEG layers provided excellent colloidal stability. In vitro protein adsorption tests using 5% serum demonstrated the ability of the self-assembled copolymer layers to resist biologically nonspecific fouling and to prevent aggregation of the nanoparticles in physiological environments. These results demonstrate that the electrostatic self-assembly of PEG copolymers onto silica nanoparticles used as drug nanocarriers is a robust and efficient procedure, providing excellent control of their biointerfacial properties.

Poly(N-isopropylacrylamide) grafted on plasma-activated poly(ethylene oxide): thermal response and interaction with proteins

Thermoresponsive polymer layers offer the possibility of preparing smart surfaces with properties that are switchable through a phase transition, usually close to the lower critical solution temperature of the polymer. In particular, poly( N-isopropylacrylamide) (pNIPAM) has gained a great deal of attention because it has such a phase transition in a physiologically interesting temperature range. We have prepared ultrathin thermoresponsive coatings by grafting pNIPAM on a plasma-CVD-deposited, poly(ethylene oxide)-like polymer substrate that was activated in an Ar plasma discharge to initiate the grafting. The presence and integrity of pNIPAM was verified by XPS and ToF-SIMS, and a dramatic change in the wettability during the phase transition was identified by temperature-dependent contact angle measurements. The transition from the hydrated to the collapsed conformation was analyzed by temperature-dependent QCM measurements and by AFM. An unusual, reversible behavior of the viscoelastic properties was seen directly at the phase transition from the swollen to the collapsed state. The phase transition leads to a switching from protein repulsion to a state that allows the adsorption of proteins.

Characterization of antigens adsorbed to anionic PLG microparticles by XPS and TOF‐SIMS

The chemical composition of the surface of anionic PLG microparticles before and after adsorption of vaccine antigens was measured using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The interfacial distributions of components will reflect underlying interactions that govern properties such as adsorption, release, and stability of proteins in microparticle vaccine delivery systems. Poly(lactide-co-glycolide) microparticles were prepared by a w/o/w emulsification method in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). Ovalbumin, lysozyme, a recombinant HIV envelope glyocoprotein and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with XPS and time-of-flight secondary mass used to analyze elemental and molecular distributions of components of the surface of lyophilized products. Protein (antigen) binding to PLG microparticles was measured directly by distinct elemental and molecular spectroscopic signatures consistent with amino acids and excipient species. The surface sensitive composition of proteins also included counter ions that support the importance of electrostatic interactions being crucial in the mechanism of adsorptions. The protein binding capacity was consistent with the available surface area and the interpretation of previous electron and atomic force microscope images strengthened by the quantification possible by XPS and the qualitative identification possible with TOF-SIMS. Protein antigens were detected and quantified on the surface of anionic PLG microparticles with varying degrees of efficiency under different adsorption conditions such as surfactant level, pH, and ionic strength. Observable changes in elemental and molecular composition suggest an efficient electrostatic interaction creating a composite surface layer that mediates antigen binding and release.

Structure and reactivity of adsorbed fibronectin films on mica

Understanding the interactions of adsorbed fibronectin (Fn) with other biomolecules is important for many biomedical applications. Fn is found in almost all body fluids, in the extracellular matrix, and plays a fundamental role in many biological processes. This study found that the structure (conformation, orientation) and reactivity of Fn adsorbed onto mica is dependent on the Fn surface concentration. Atomic force microscopy and x-ray photoelectron spectroscopy were used to determine the surface coverage of adsorbed Fn from isolated molecules at low surface coverage to full monolayers at high surface coverage. Both methods showed that the thickness of Fn film continued to increase after the mica surface was completely covered, consistent with Fn adsorbed in a more upright conformation at the highest surface-Fn concentrations. Time-of-flight secondary ion mass spectrometry showed that relative intensities of both sulfur-containing (cystine, methionine) and hydrophobic (glycine, leucine/isoleucine) amino acids varied with changing Fn surface coverage, indicating that the conformation of adsorbed Fn depended on surface coverage. Single-molecule force spectroscopy with collagen-related peptides immobilized onto the atomic force microscope tip showed that the specific interaction force between the peptide and Fn increases with increasing Fn surface coverage.

Fluorescence, XPS, and TOF-SIMS surface chemical state image analysis of DNA microarrays

Performance improvements in DNA-modified surfaces required for microarray and biosensor applications rely on improved capabilities to accurately characterize the chemistry and structure of immobilized DNA molecules on micropatterned surfaces. Recent innovations in imaging X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) now permit more detailed studies of micropatterned surfaces. We have exploited the complementary information provided by imaging XPS and imaging TOF-SIMS to detail the chemical composition, spatial distribution, and hybridization efficiency of amine-terminated single-stranded DNA (ssDNA) bound to commercial polyacrylamide-based, amine-reactive microarray slides, immobilized in both macrospot and microarray diagnostic formats. Combinations of XPS imaging and small spot analysis were used to identify micropatterned DNA spots within printed DNA arrays on slide surfaces and quantify DNA elements within individual microarray spots for determination of probe immobilization and hybridization efficiencies. This represents the first report of imaging XPS of DNA immobilization and hybridization efficiencies for arrays fabricated on commercial microarray slides. Imaging TOF-SIMS provided distinct analytical data on the lateral distribution of DNA within single array microspots before and after target hybridization. Principal component analysis (PCA) applied to TOF-SIMS imaging datasets demonstrated that the combination of these two techniques provides information not readily observable in TOF-SIMS images alone, particularly in identifying species associated with array spot nonuniformities (e.g., "halo" or "donut" effects often observed in fluorescence images). Chemically specific spot images were compared to conventional fluorescence scanned images in microarrays to provide new information on spot-to-spot DNA variations that affect current diagnostic reliability, assay variance, and sensitivity.

Characterization of fibrinogen adsorption onto glass microcapillary surfaces by ELISA

Adsorption of biomolecules onto microchannel surfaces remains a critical issue in microfluidic devices. This paper investigates the adsorption of fibrinogen on glass microcapillaries using an immunoassay method (ELISA) and X-ray photoelectron spectroscopy (XPS). Various adsorption conditions such as protein concentrations and incubation times, buffer pH, buffer ionic strengths and effects of flow are presented. ELISA is successfully demonstrated as a facile and robust technique to examine these phenomena. The highest adsorption level occurs near the isoelectric point of fibrinogen (pH 5.0) and low buffer ionic strengths (0-8 mM). Microchannel surface saturation was achieved at a fibrinogen solution concentration of approximately 50 microg ml(-1). Fibrinogen adsorption under flow was always higher than that seen in static systems. The importance of diffusion phenomena in microchannels on protein adsorption was demonstrated. ELISA experiments using fused silica and PEEK have also confirmed significant adsorption on these mass spectrometer transfer line materials.

Nonfouling surfaces: a review of principles and applications for microarray capture assay designs

Microarray technology, like many other surface-capture diagnostic methods, relies on fidelity of affinity interactions between a surface-bound probe (e.g., nucleic acid or antibody) and its target in the sample milieu to produce an assay signal specific to analyte. These interfacial interactions produce the assay result with the associated assay requirements for sensitivity, specificity, reproducibility, and ease-of-use. For surface-capture assays, surface properties play a critical role in this performance. Microarray surfaces are routinely immersed into aqueous target solutions of varying complexity, from simple saline or buffer solutions to serum, tissue, food, or microbiological lysates involving thousands of different solutes. The surface chemistry must not only be capable of immobilizing probes at high density in microscale patterned spots, retaining probe affinity for target within these spots, reducing target capture outside of these spots, but also be efficient at eliminating nontarget capture anywhere else on the surface. Historically, the development of surface chemistry with these specific "nonfouling" properties has been an intense interest for bioassays, with many types of architectures, molecular compositions, and performance capabilities across many different surface-capture assays. The unique environment of the bioassay, including the long-standing problems associated with high concentrations of "nontarget" proteins and other surface-active biomolecules in the assay milieu, has proven to be quite challenging to surface chemistry performance. Microarray technology designs with microspotted patterns must address these problems in these challenging dimensions in order to improve signal:noise ratios for captured target signals on surfaces. This chapter reviews principles of protein-surface interfacial physical chemistry, protein adsorption as a source of assay noise, and various approaches to control this interface in the context of surface-capture assay fabrication and improving assay performance from complex milieu. Practical methods to modify surfaces for biological assay are presented. Polymer substrate coating methods, including "grafting from" and "grafting to" strategies, polymer brushes, and alternative surface modification methods are reviewed. Methods to assess biological "fouling" in the bioassay format are also discussed.

Adhesion of mouse fibroblasts on hexamethyldisiloxane surfaces with wide range of wettability

Surface wettability is an important physicochemical property of biomaterials, and it would be more helpful for understanding this property if a wide range of wettability are employed. This study focused on the effect of surface wettability on fibroblast adhesion over a wide range of wettability using a single material without changing surface topography. Plasma polymerization with hexamethyldisiloxane followed by oxygen (O2)-plasma treatment was employed to modify the surfaces. The water contact angle of sample surfaces varied from 106 degrees (hydrophobicity) to almost 0 degrees (super-hydrophilicity). O2 functional groups were introduced on polymer surfaces during O2-plasma treatment. The cell attachment study confirmed that the more hydrophilic the surface, the more fibroblasts adhered in the initial stage that includes super-hydrophilic surfaces. Cells spread much more widely on the hydrophilic surfaces than on the hydrophobic surfaces. There was no significant difference in fibroblast proliferation, but cell spreading was much greater on the hydrophilic surfaces. The fibronectin adsorbed much more on a hydrophilic surface while albumin dominated on a hydrophobic surface in a competing mode. These findings suggest the importance of the surface wettability of biomaterials on initial cell attachment and spreading. The degree of wettability should be taken into account when a new biomaterial is to be employed.

Rapid method for the sensitive detection of protein contamination on surgical instruments

Hospital sterile service departments (SSDs) currently rely on simple visual confirmation of cleanliness as an assessment of the efficacy of cleaning surgical instruments. The inherent inability to monitor low levels of infectious or proteinaceous contamination on surgical instruments creates the possibility that highly dangerous and robust biological agents may remain infectious and undetected even after standard cleaning and sterilization procedures have been employed. This paper describes the development of a novel microscopy technique, episcopic differential interference contrast microscope, combined with the fluorescent reagent, SYPRO Ruby, to rapidly detect brain tissue protein to below 400 pg/mm(2) on an instrument surface. This technique has displayed a minimum level of detection observed by 50% of volunteers of 85 pg/mm(2) (95% confidence intervals 67-112 pg/mm(2)). Quantitative assessment of instruments supplied from various SSDs enabled the establishment of a 'contamination index' of both proteinaceous and non-proteinaceous deposits on the surface. This new methodology for the assessment of surface contamination is generally applicable and should facilitate future quantitative surveys of instrument contamination in hospitals and other healthcare environments.

Surface study of collagen/poloxamine hydrogels by a 'deep freezing' ToF-SIMS approach

In order to determine the presence of collagen molecules at the surface of a collagen-modified poloxamine hydrogel (a semi-interpenetrating network), the surface composition was studied using Time-of-Flight Secondary Ion Mass Spectra (ToF-SIMS). Collagen was added to the poloxamine hydrogel (poloxamine is a commercially available four-arm poly(ethylene oxide)/poly(propylene oxide) block copolymer, PEO/PPO) to promote the attachment of endothelial or liver cells. X-ray photoelectron spectroscopy (XPS) of dry samples showed a sharp increase in the N content from 0.6% in a pure poloxamine hydrogel to 8.8% in the collagen-containing material. Afterwards, the surface was studied by a 'deep freezing' ToF-SIMS approach under progressive heating from -120 to -60 degrees C. The positive spectrum of collagen/poloxamine at -65 degrees C displayed distinct signals corresponding to different amino acid fragments such as CH4N+ (30 m/z, Gly), C3HN2+ (43 m/z, Arg), C2H6N+ (44 m/z, Ala) and C4H5N2+(81m/z, His) and others corresponding to the PEO and PPO blocks of poloxamine. In addition, the negative spectrum showed peaks at 26 m/z (CN-), 32 m/z (S-) and 42 m/z (CNO-) characteristic of fragments of the collagen molecule. Imaging experiments indicated the homogeneous distribution of the collagen on the surface. These results supported the use of ToF-SIMS for the surface characterization of hydrated hydrogels and confirmed the collagen presence as the means whereby cells attach to the modified poloxamine matrix.

Adsorption of fibrinogen on tantalum oxide, titanium oxide and gold studied by the QCM-D technique

The adsorption of human fibrinogen on tantalum oxide, titanium oxide and gold surfaces has been studied by quartz crystal microbalance with dissipation (QCM-D) at 37 degrees C. Two different protein concentrations have been used, one close to physiological concentration (1 mg/ml) and one significantly lower (0.033 mg/ml). To further characterize the adsorbed fibrinogen layer, the subsequent binding of both polyclonal and monoclonal antibodies of fibrinogen is studied. We found that the viscoelastic properties of the fibrinogen layer depends strongly on the initial protein concentration. The trend is generally seen for all three surfaces. The fibrinogen layer on gold and tantalum oxide is found to have the same viscoelastic properties, which are different from those found for the fibrinogen layer adsorbed on titanium oxide. The dependency of the surface chemistry on the viscoelastic properties of the fibrinogen layer is observed directly for the 0.033 mg/ml solution, and indirectly through the antibody response for the 1 mg/ml solution. From this we conclude that the orientation and/or denaturation of fibrinogen on a surface depends on the surface chemistry and the protein concentration in the solution, and that the binding of antibodies is a useful way to detect this difference.

Quantitative X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry characterization of the components in DNA

The great diversity of techniques to synthesize and use DNA microarrays has made them extremely flexible for a variety of applications. This flexibility also has made standardization difficult, leading to problems comparing data from these different systems. In this work, we use the surface science techniques of X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) to analyze the components of DNA. The atomic ratios of the components of nucleobases, nucleosides, and nucleotides were characterized by XPS. The chemical shifts in the high-resolution XPS spectra allow for their relatively easy resolution. The unique positive and negative ions from the nucleobases, nucleosides, and nucleotides in their TOF-SIMS spectra were identified. This information was used to build a comprehensive table of all of the molecular ions. These standard spectra of DNA components can be used to predict the relative amounts of the bases within more complex molecules either by univariate analysis (i.e., by relating the base molecular ions to the sugar fragment ions within the nucleotides) or by multivariate analysis (e.g., principal component analysis). Our preliminary examination of four oligonucleotides shows promising results in that we can distinguish between two oligomers of similar composition using univariate and multivariate analysis, although additional studies are needed to expand this method to more complex oligomers.