Current Strategies for Noble Metal Nanoparticle Synthesis

A high-performance electrochemical aptasensor based on graphene-decorated rhodium nanoparticles to detect HER2-ECD oncomarker in liquid biopsy

Evaluation of extracellular domain of human epidermal growth factor receptor-2 (HER2-ECD) oncomarker status is an impressive factor in screening, diagnosing and monitoring early-stage breast cancer (BC). Electrochemical aptamer-based nanobiosensor with high sensitivity and selectivity for quantitative and qualitative measurement of HER2-ECD oncomarker was developed. In this study, the nanocomposite made by distinct materials included reduced graphene oxide nano-sheets (rGONs) and rhodium nanoparticles (Rh-NPs) on the graphite electrode (GE) surface. This structure resulted in amplified electrochemical activity, high surface area, stability, and bio-compatibility. Each of the steps of preparing nanomaterials and setting up biosensor were carefully examined by analytical and electrochemical techniques. Various modified electrodes were constructed and analyzed in terms of electrochemical performance, morphology, size, and shape of nanomaterials. The GE-based aptasensor had a noteworthy and conducive results against HER2-ECD with a wide dynamic range of 10.0-500.0 ng/mL, a low limit of detection (LOD) of 0.667 ng/mL (significantly less than the clinical cut-off), and a low limit of quantification (LOQ) of 2.01 ng/mL. The benefits provided by this aptasensor such as broad dynamic range, high sensitivity, selectivity, stability, reproducibility, and low cost suggest tremendous potential for non-invasive detection and monitoring of the HER2-ECD levels of BC care and clinical diagnosis.

Electron Transport in Discontinuous Metal Thin Films

The structure and basic experimental electrical properties of vacuum evaporated discontinuous (island) metal thin films of discrete metal nanoparticles on insulating substrates are briefly reviewed. Then the widely accepted Neugebauer and Webb (N&W) electrostatically activated electron tunneling conduction model is covered (with enhancements) before the numerous discrepancies between this model and experimental observations are identified, e.g. minimal substrate bias effect, non-linear field distribution, anomalous AC effects, asymmetrical contact effects, and switching. A modified model, based on contact electron injection and extraction, and computer simulations are introduced which explain these discrepancies at a qualitative level. However, quantitative experimental verification of the model is not possible without stable, reproducible films of known structures. The paper concludes with a review of possible preparation techniques which could yield satisfactory samples, especially self-assembly of organically protected metal nanoparticles. One of these has already demonstrated electrostatically activated conduction.

Role of Silica Nanoparticles in Abiotic and Biotic Stress Tolerance in Plants: A Review

The demand for agricultural crops continues to escalate with the rapid growth of the population. However, extreme climates, pests and diseases, and environmental pollution pose a huge threat to agricultural food production. Silica nanoparticles (SNPs) are beneficial for plant growth and production and can be used as nanopesticides, nanoherbicides, and nanofertilizers in agriculture. This article provides a review of the absorption and transportation of SNPs in plants, as well as their role and mechanisms in promoting plant growth and enhancing plant resistance against biotic and abiotic stresses. In general, SNPs induce plant resistance against stress factors by strengthening the physical barrier, improving plant photosynthesis, activating defensive enzyme activity, increasing anti-stress compounds, and activating the expression of defense-related genes. The effect of SNPs on plants stress is related to the physical and chemical properties (e.g., particle size and surface charge) of SNPs, soil, and stress type. Future research needs to focus on the “SNPs–plant–soil–microorganism” system by using omics and the in-depth study of the molecular mechanisms of SNPs-mediated plant resistance.

State of the Art on Green Route Synthesis of Gold/Silver Bimetallic Nanoparticles

Recently, bimetallic nanoparticles (BMNPs) blending the properties of two metals in one nanostructured system have generated enormous interest due to their potential applications in various fields including biosensing, imaging, nanomedicine, and catalysis. BMNPs have been developed later with respect to the monometallic nanoparticles (MNPs) and their physicochemical and biological properties have not yet been comprehensively explored. The manuscript aims at collecting the main design criteria used to synthetize BMNPs focusing on green route synthesis. The influence of experimental parameters such as temperature, time, reagent concentrations, capping agents on the particle growth and colloidal stability are examined. Finally, an overview of their nanotechnological applications and biological profile are presented.

Tailoring noble metal nanoparticle designs to enable sensitive lateral flow immunoassay

Lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters is a popular point-of-care diagnostic technique. However, given the weak absorbance of traditional 20-40 nm spherical AuNPs, their sensitivity is low, which greatly limits the wide application of AuNP-based LFIA. With the rapid advances in materials science and nanotechnology, the synthesis of noble metal nanoparticles (NMNPs) has enhanced physicochemical properties such as optical, plasmonic, catalytic, and multifunctional activity by simply engineering their physical parameters, including the size, shape, composition, and external structure. Using these engineered NMNPs as an alternative to traditional AuNPs, the sensitivity of LFIA has been significantly improved, thereby greatly expanding the working range and application scenarios of LFIA, particularly in trace analysis. Therefore, in this review, we will focus on the design of engineered NMNPs and their demonstration in improving LFIA. We highlight the strategies available for tailoring NMNP designs, the effect of NMNP engineering on their performance, and the working principle of each engineering design for enhancing LFIA. Finally, current challenges and future improvements in this field are briefly discussed.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Synthesis and potential applications of trimetallic nanostructures

The present review highlights the synthetic strategies and potential applications of TMNs for organic reactions, environmental remediation, and health-related activities.

Noble-Metal Nanorod Cryoaerogels with Electrocatalytically Active Surface Sites

Noble-metal-based electrocatalysts usually contain small nanoparticle building blocks to ensure a high specific surface area as the scene for the surface processes. Here, we show that relatively large noble-metal nanorods are also promising candidates to build up functional macrostructures with prominent electrocatalytic activity. After optimizing and upscaling the syntheses of gold nanorods and gold bipyramid-templated silver nanorods, cryoaerogels are fabricated on a conductive substrate via flash freezing and subsequent freeze drying. The versatile cryoaerogelation technique allows the formation of macrostructures with dendritic, open-pore structure facilitating the increase of the accessible nanorod surfaces. It is demonstrated via electrochemical oxidation and stripping test experiments that noble-metal surface sites are electrochemically active in redox reactions. Furthermore, gold nanorod cryoaerogels offer a platform for redox sensing, ethanol oxidation reaction, as well as glucose sensing. Compared to their simply drop-cast and dried counterparts, the noble-metal nanorod cryoaerogels offer enhanced activity due to the open porosity of the fabricated nanostructure while maintaining structural stability.

Bimetallic nanocomposite (Ag-Au, Ag-Pd, Au-Pd) synthesis using gum kondagogu a natural biopolymer and their catalytic potentials in the degradation of 4-nitrophenol

Bimetallic nanoparticles (BNPs) constitute two different metal elements and exhibit relatively superior mechanistic and catalytic efficacies owing to their synergistic functions over monometallic nanoparticles. In the present study various bimetallic Ag-Au, Ag-Pd, Au-Pd nanoparticles were synthesized using a natural biopolymer gum kondagogu (GK) as a reducing and capping agent, by a simple and cost-effective method. The synthesized BNPs when characterized using UV-vis spectroscopy revealed a specific surface plasmon resonance band (SPR) of each nanocomposite. The average particle size of Ag-Au, Ag-Pd, and Au-Pd BNPs was found to be 23 ± 10.3, 21 ± 7.6, and 23 ± 9.4 nm respectively based on transmission electron microscopy analysis. Surface morphology and functional groups on the gum matrix of GK-BNPs were analyzed by XRD and FT-IR respectively. The bimetallic nanocomposites were evaluated for their catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol in the presence of NaBH₄. The kinetic studies performed, depicted rate constants for Ag-Au, Ag-Pd, and Au-PdNPs as 0.31, 0.39, and 0.28 min^-1 respectively. The catalytic efficiencies of three bimetallic nanocomposites were of the following order Ag-Pd > Ag-Au > Au-Pd. This study establishes the catalytic potentials of the three different bimetallic nanocomposites in the reduction of 4-NP an environmental pollutant, and the impact of their synergistic property.

ncRNAs in Therapeutics: Challenges and Limitations in Nucleic Acid-Based Drug Delivery

Non-coding RNAs (ncRNAs) are emerging therapeutic tools but there are barriers to their translation to clinical practice. Key issues concern the specificity of the targets, the delivery of the molecules, and their stability, while avoiding “on-target” and “off-target” side effects. In this “ncRNA in therapeutics” issue, we collect several studies of the differential expression of ncRNAs in cardiovascular diseases, bone metabolism-related disorders, neurology, and oncology, and their potential to be used as biomarkers or therapeutic targets. Moreover, we review recent advances in the use of antisense ncRNAs in targeted therapies with a particular emphasis on their basic biological mechanisms, their translational potential, and future trends.

Synthesis, Chemical-Physical Characterization, and Biomedical Applications of Functional Gold Nanoparticles: A Review

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH4 with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust-Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical-physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure-activity correlation in the frame of their applications in the biomedical and biotechnology sectors.

Flow-electrochemical synthesis of Prussian Blue based nanozyme 'artificial peroxidase'

We report on fully electrochemical flow-through synthesis of Prussian Blue based nanozymes defeating peroxidase in terms of more than 200 times higher catalytic rate constant (k = 6 × 10⁴ s^-1). Being reagentless, reproducible, simple and scalable, the proposed approach blazes new trails for the electrosynthesis of functional conductive and electroactive nanomaterials.

Polymer Nanocomposites of Selenium Biofabricated Using Fungi

Nanoparticle-reinforced polymer-based materials effectively combine the functional properties of polymers and unique characteristic features of NPs. Biopolymers have attained great attention, with perspective multifunctional and high-performance nanocomposites exhibiting a low environmental impact with unique properties, being abundantly available, renewable, and eco-friendly. Nanocomposites of biopolymers are termed green biocomposites. Different biocomposites are reported with numerous inorganic nanofillers, which include selenium. Selenium is a micronutrient that can potentially be used in the prevention and treatment of diseases and has been extensively studied for its biological activity. SeNPs have attracted increasing attention due to their high bioavailability, low toxicity, and novel therapeutic properties. One of the best routes to take advantage of SeNPs' properties is by mixing these NPs with polymers to obtain nanocomposites with functionalities associated with the NPs together with the main characteristics of the polymer matrix. These nanocomposite materials have markedly improved properties achieved at low SeNP concentrations. Composites based on polysaccharides, including fungal beta-glucans, are bioactive, biocompatible, biodegradable, and have exhibited an innovative potential. Mushrooms meet certain obvious requirements for the green entity applied to the SeNP manufacturing. Fungal-matrixed selenium nanoparticles are a new promising biocomposite material. This review aims to give a summary of what is known by now about the mycosynthesized selenium polymeric nanocomposites with the impact on fungal-assisted manufactured ones, the mechanisms of the involved processes at the chemical reaction level, and problems and challenges posed in this area.