HIV-1 viral load assays for resource-limited settings

Performance of the novel Qiagen artus QS-RGQ viral load assays compared to that of the Abbott RealTime system with genetically diversified HIV and hepatitis C Virus plasma specimens

We compared two novel Qiagen QS-RGQ viral load assays with the established Abbott RealTime assays on a highly diversified panel of 121 human immunodeficiency virus (HIV) and 107 hepatitis C virus (HCV) specimens. The quantifications correlated well for all HIV and HCV types, but Qiagen yielded higher HCV concentrations than Abbott, predominantly in genotypes 4 and 5.

Perspectives on introduction and implementation of new point-of-care diagnostic tests

In recent years, there has been significant investment from both the private and public sectors in the development of diagnostic technologies to meet the need for human immunodeficiency virus (HIV) and tuberculosis testing in low-resource settings. Future investments should ensure that the most appropriate technologies are adopted in settings where they will have a sustainable impact. Achieving these aims requires the involvement of many stakeholders, as their needs, operational constraints, and priorities are often distinct. Here, we discuss these considerations from different perspectives representing those of various stakeholders involved in the development, introduction, and implementation of diagnostic tests. We also discuss some opportunities to address these considerations.

Low-cost assays for monitoring HIV infected individuals in resource-limited settings

Use of a combination of CD4 counts and HIV viral load testing in the management of antiretroviral therapy (ART) provides higher prognostic estimation of the risk of disease progression than does the use of either test alone. The standard methods to monitor HIV infection are flow cytometry based for CD4+ T cell count and molecular assays to quantify plasma viral load of HIV. Commercial assays have been routinely used in developed countries to monitor ART. However, these assays require expensive equipment and reagents, well trained operators, and established laboratory infrastructure. These requirements restrict their use in resource-limited settings where people are most afflicted with the HIV-1 epidemic. With the advent of low-cost and/or low-tech alternatives, the possibility of implementing CD4 count and viral load testing in the management of ART in resource-limited settings is increasing. However, an appropriate validation should have been done before putting them to use for patient testing.

Use of dried-blood-spot samples and in-house assays to identify antiretroviral drug resistance in HIV-infected children in resource-constrained settings

Monitoring HIV drug resistance is an important component of the World Health Organization's global HIV program. HIV drug resistance testing is optimal with commercially available clinically validated test kits using plasma; however, that type of testing may not be feasible or affordable in resource-constrained settings. HIV genotyping from dried blood spots (DBS) with noncommercial (in-house) assays may facilitate the capture of HIV drug resistance outcomes in resource-constrained settings but has had varying rates of success. With in-house assays for HIV reverse transcriptase, we evaluated the yield of genotyping DBS samples collected from HIV-infected children who were enrolled in two clinical trials conducted in sub-Saharan Africa (median HIV viral load, 5.88 log(10) HIV RNA copies/ml; range, 4.04 to 6.99). Overall, HIV genotypes were obtained for 94 (89.5%) of 105 samples tested (95% and 84% from clinical trials #1 and #2, respectively); however, successful analysis of 15 (16.1%) of the 94 samples required repeat testing using a different set of primers on previously synthesized cDNA. The yield of genotyping was lower on the DBS that were stored suboptimally from clinical trial #2 (56% versus 88% for optimally stored). Concordance with plasma genotypes derived using a clinically validated, commercial kit-based assay (ViroSeq HIV-1 genotyping system) was also assessed in a subset of children with paired testing. For 34 samples with paired DBS and plasma genotypes, there was 100% concordance for major drug resistance mutations. DBS genotyping using in-house assays provides an alternative for antiretroviral drug resistance testing in children in resource-constrained regions but may require region-specific optimization before widespread use.

A novel RealTime HIV-1 Qualitative assay for the detection of HIV-1 nucleic acids in dried blood spots and plasma

Abbott RealTime HIV-1 Qualitative is an in vitro real-time PCR assay for detecting HIV-1 nucleic acids in human plasma and dried blood spots (DBS). The assay was designed to be used in diagnosis of HIV-1 infections in pediatric and adult patients, with an emphasis on the applicability in resource-limited settings. Use of DBS facilitates specimen collection from remote areas and transportation to testing laboratories. Small sample input requirement facilitates testing of specimens with limited collection volume. The Abbott RealTime HIV-1 Qualitative assay is capable of detecting HIV-1 group M subtypes A-H, group O and group N samples. HIV-1 virus concentrations detected with 95% probability were 80 copies/mL of plasma using the plasma protocol, and 2469 copies/mL of whole blood using the DBS protocol. The assay detected HIV-1 infection in 13 seroconversion panels an average 10.5 days earlier than an HIV-1 antibody test and 4.9 days earlier than a p24 antigen test. For specimens collected from 6 weeks to 18 months old infants born to HIV-1 positive mothers, assay results using both the DBS and plasma protocols agreed well with the Roche Amplicor HIV-1 DNA Test version 1.5 (95.5% agreement for DBS and 97.8% agreement for plasma).

Continuous signal enhancement for sensitive aptamer affinity probe electrophoresis assay using electrokinetic concentration

We describe an electrokinetic concentration-enhanced aptamer affinity probe electrophoresis assay to achieve highly sensitive and quantitative detection of protein targets in a microfluidic device. The key weaknesses of aptamer as a binding agent (weak binding strength/fast target dissociation) were counteracted by continuous injection of fresh sample while band-broadening phenomena were minimized due to self-focusing effects. With 30 min of continuous signal enhancement, we can detect 4.4 pM human immunoglobulin E (IgE) and 9 pM human immunodeficiency virus 1 reverse transcriptase (HIV-1 RT), which are among the lowest limits of detection (LOD) reported. IgE was detected in serum sample with a LOD of 39 pM due to nonspecific interactions between aptamers and serum proteins. The method presented in this paper also has broad applicability to improve sensitivities of various other mobility shift assays.

Development and validation of systems for rational use of viral load testing in adults receiving first-line ART in sub-Saharan Africa

BACKGROUND

World Health Organization (WHO) immunological and clinical criteria for monitoring first-line antiretroviral treatment (ART) offer low accuracy for predicting viral failure. Targeting viral load assays to those at high risk has been recommended and a system to do this has been developed in Cambodia. Systems for use in sub-Saharan African populations were evaluated.

METHODS

A new Ugandan-based scoring system for targeting viral load assays was developed from data from the first 4 years of a Ugandan cohort (N = 559) receiving first-line ART. The accuracy of this, the Cambodian system and the WHO criteria to predict viral failure, through targeting viral load assays, were compared in a separate population of 496 Ugandans.

RESULTS

The new Ugandan scoring system included CD4 cell count, mean cell volume, adherence, and HIV-associated clinical events as predictors of viral failure. In the validation population, the Ugandan system undertook viral load assays in 61 (12.3%) cases offering 20.5% sensitivity and 100% positive predictive value (PPV) to predict viral failure. The Cambodian system undertook viral load assays in 33 (6.7%) cases producing 23.1% sensitivity and 90.0% PPV. WHO criteria recommended viral load assays in 72 (14.5%) cases offering 30.8% sensitivity and 100% PPV.

CONCLUSION

Locally developed algorithms based on clinical and immunological criteria may offer little additional accuracy over WHO criteria for targeting viral load assays. When possible, confirming viral load before switching therapy is recommended. Scoring systems are more flexible than WHO criteria in allowing ART providers to choose the proportion of the population that undergo targeted viral load testing.

Generation of HIV-1 and Internal Control Transcripts as Standards for an In-House Quantitative Competitive RT-PCR Assay to Determine HIV-1 Viral Load

Human immunodeficiency virus type-1 (HIV-1) viral load is useful for monitoring disease progression in HIV-infected individuals. We generated RNA standards of HIV-1 and internal control (IC) by in vitro transcription and evaluated its performance in a quantitative reverse transcription polymerase chain reaction (qRT-PCR) assay. HIV-1 and IC standards were obtained at high RNA concentrations, without DNA contamination. When these transcripts were included as standards in a qRT-PCR assay, it was obtained a good accuracy (±0.5 log(10) unit of the expected results) in the quantification of the HIV-1 RNA international standard and controls. The lower limit detection achieved using these standards was 511.0 IU/mL. A high correlation (r = 0.925) was obtained between the in-house qRT-PCR assay and the NucliSens easyQ HIV-1 test (bioMerieux) for HIV-1 RNA quantitation with clinical samples (N = 14). HIV-1 and IC RNA transcripts, generated in this study, proved to be useful as standards in an in-house qRT-PCR assay for determination of HIV-1 viral load.

Diagnostic accuracy of ultrasensitive heat-denatured HIV-1 p24 antigen in non-B subtypes in Kampala, Uganda

We evaluated the accuracy of heat-denatured, amplification-boosted ultrasensitive p24 assay (Up24) compared with reverse transcriptase polymerase chain reaction (RT-PCR). We tested 394 samples from Ugandans infected with HIV-1 non-B subtypes. We compared Up24 levels (HIV-1 p24 Core Profile enzyme-linked immunosorbent assay (ELISA), NEN Life Science Products) to RNA viral loads (Amplicor HIV-1 Monitor 1.5, Roche) by linear regression, and calculated sensitivity, specificity, positive and negative predictive values. Median viral load was 4.9 log10 copies/mL (interquartile range [IQR], 2.6-5.5); 114 samples (29%) were undetectable (<400 copies/mL). Sensitivity of the Up24 assay to detect viral load ≥400 copies/mL was 69%, specificity was 67%, and positive and negative predictive values were 84% and 47%, respectively. Sensitivity of Up24 was 90%, 80%, 68%, 62% and 45% to detect viral loads of >500,000, 250,000-500,000, 100,000-250,000, 50,000-100,000 and 400-50,000 copies/mL, respectively. In conclusion, when compared with RT-PCR for patients infected with non-B subtypes, the Up24 demonstrated limited sensitivity especially at low viral loads. Moreover, the Up24 was positive in 33% of samples deemed undetectable by RT-PCR, which may limit the use of the Up24 to detect viral suppression.

Viral load testing in a resource-limited setting: quality control is critical

BACKGROUND

World Health Organization guidelines now recommend routine use of viral load testing, where available, for patients receiving antiretroviral treatment (ART). However, its use has not been routinely implemented in many resource-limited settings due to cost, availability and accessibility. Viral load testing is complex, making its application in resource-limited settings challenging. We describe the issues encountered by Médecins Sans Frontières (MSF) when using routine viral load testing in a large HIV programme in sub-Saharan Africa.

METHODS

Between October 2005 and August 2006, more than 1200 patients on ART had viral load tests at baseline and at three-month intervals performed by a local reference laboratory that was quality assured by an experienced international institution. Concerns with reliability of results halted testing. The quality control measures instituted with a second laboratory and outcomes of these were documented.

RESULTS

In 2005 and 2006, only 178 of 334 (53%) previously ART-naïve patients tested after six to 12 months of treatment had viral loads of less than 1000 copies/mL. Similar MSF programmes elsewhere demonstrated virological suppression rates of more than 85%, and duplicate testing showed unacceptable discordance. Laboratory problems encountered included: disregarded quality control; time delays; requirement for retesting; and duplicate sample variations. Potentially harmful clinical outcomes of inaccurate viral load results include: unnecessary ART regimen changes; unnecessary enhanced adherence counselling after "false failures"; and undetected virological failure.

CONCLUSIONS

Viral load testing performed without rigorous quality control carries the risk of erroneous and potentially damaging results. Viral load testing should be utilized only if robust quality assurance has been implemented. Our experience in this and other settings led to the development of a guide for assessing the suitability of a laboratory for viral load testing that can be used to help achieve reliable results.

Weight loss after the first year of stavudine-containing antiretroviral therapy and its association with lipoatrophy, virological failure, adherence and CD4 counts at primary health care level in Kigali, Rwanda

This study was conducted among 609 adults on stavudine-based antiretroviral treatment (ART) for at least one year at health center level in Kigali, Rwanda to (a) determine the proportion who manifest weight loss after one year of ART (b) examine the association between such weight loss and a number of variables, namely: lipoatrophy, virological failure, adherence and on-treatment CD4 count and (c) assess the validity and predictive values of weight loss to identify patients with lipoatrophy. Weight loss after the first year of ART was seen in 62% of all patients (median weight loss 3.1 kg/year). In multivariate analysis, weight loss was significantly associated with treatment-limiting lipoatrophy (adjusted effect/kg/year -2.0 kg, 95% confidence interval -0.6;-3.4 kg; P<0.01). No significant association was found with virological failure or adherence. Higher on-treatment CD4 cell counts were protective against weight loss. Weight loss that was persistent, progressive and/or chronic was predictive of lipoatrophy, with a sensitivity and specificity of 72% and 77%, and positive and negative predictive values of 30% and 95%. In low-income countries, measuring weight is a routine clinical procedure that could be used to filter out individuals with lipoatrophy on stavudine-based ART, after alternative causes of weight loss have been ruled out.

Current challenges to viral load testing in the context of emerging genetic diversity of HIV-1

INTRODUCTION

One of the major characteristics of HIV-1 is its extreme genetic diversity. A key factor in assessing the sensitivity of a molecular-based assay measuring HIV-1 RNA viral load (VL) in plasma is its ability to detect/quantify all (or most of) relevant HIV-1 genetic subtype/recombinant forms accurately.

AREAS COVERED

This review provides an overview of the current commercially available quantitative real-time assays (the Abbott RealTime HIV-1, Roche TaqMan HIV-1 versions 1.0 and 2.0, BioMérieux Nuclisens EasyQ HIV-1, Siemens VERSANT HIV-1 RNA 1.0 kinetic PCR, and Biocentric Generic HIV Viral Load assays). For each assay, studies from 2005 to 2010 assessing the impact of HIV-1 genetic diversity on the reliability of HIV-1 RNA quantification are described.

EXPERT OPINION

In light of HIV-1 genetic diversity, a general recommendation to favor one test over the other cannot categorically be made. Larger field evaluations of HIV-1 RNA assays should be conducted in areas where HIV-1 genetic diversity is the highest. The large-scale implementation of HIV-1 VL testing is urgently required in the developing world to change HIV infection from a likely death sentence into a manageable chronic infection, as done in Northern countries.

HIV-1 load comparison using four commercial real-time assays

The HIV-1 RNA viral load is commonly used for the monitoring of disease progression and antiretroviral treatment of HIV-1-infected patients. Since the misestimating of values could lead to inappropriate therapeutical management, the comparative performances, especially the ability to span the genetic diversity of HIV-1, of available automated real-time assays need to be evaluated. We conducted a prospective study with 74 consenting patients enrolled between March 2007 and November 2008. A blood sample was obtained at the time of diagnosis of HIV seropositivity and blindly tested for HIV-1 RNA by at least 4 commercial tests: the Abbott m2000 RealTime HIV-1, bioMérieux NucliSens EasyQ HIV-1, version 1.2 (v1.2), and Cobas AmpliPrep/Cobas TaqMan (CAP/CTM) v1.0 and v2.0 assays. The means of difference were null between CAP/CTM v2.0 and Abbott for CRF02_AG subtypes but positive in favor of CAP/CTM v2.0 for genotype B and negative in favor of NucliSens for all genotypes. The standard deviation (SD) of difference ranged from 0.3 to 0.59, depending on the considered couples of assays. Reliabilities of these four tests, appreciated by the standard deviation of difference between the measurement and the estimated "true" viral load and by the coefficient of reliability, were significantly different (P < 10(-4)) among each other. Significant differences were also observed within each group of HIV-1 genotype. The global disparity was higher for CRF02_AG than for B subtypes. This study indicates a risk of viral load misestimating or discrepancies between techniques, depending on the HIV-1 subtype, and speaks in favor of using the same assay for the monitoring of HIV-1-infected patients.

Monitoring Antiretroviral Therapy in HIV-Infected Children in Resource-Limited Countries: A Tale of Two Epidemics

Twenty-nine years into the HIV epidemic, several advances have been made; however, there remain several challenges particularly with pediatric HIV in resource-limited countries. The obstacles facing pediatric antiretroviral therapy (ART) delivery in resource-limited countries are multifaceted: lack of health care infrastructure, limited availability of pediatric drug formulations, lack of early HIV diagnostic and monitoring techniques, limited manpower with expertise in pediatric HIV care, limited donor funding, and competing public health priorities with limited health care budget. In this paper, the challenges with various ART monitoring tools in resource-limited countries are discussed. Noninvasive (e.g., patient, clinical events outcome, and adherence) and invasive (e.g., immunologic and virologic) monitoring tools are discussed. Several cheap and technically less complex laboratory tests for monitoring are becoming available. Funding agencies and country programs should invest in validating the use of current technologies to optimize pediatric HIV care in resource-limited countries.

Routine laboratory screening for acute and recent HIV infection in Lima, Peru

BACKGROUND

Before implementing screening programmes for acute HIV infection in developing countries, key issues, including cost, feasibility and public health impact, must be determined.

OBJECTIVE

Fourth-generation enzyme immunoassay (EIA) was compared with HIV-1 RNA PCR for the detection of acute and early HIV infection in counselling and testing populations in Lima, Peru.

METHODS

Adults presenting for HIV testing at designated clinics in Lima-Callao, Peru were offered additional screening for acute HIV infection. All serum samples were tested with fourth-generation Ag/Ab EIA and confirmed by line immunoassay. Negative specimens were combined into 50-sample pools for HIV-1 RNA screening by PCR analysis in standard pooling algorithms. RNA-positive samples were retested with a third-generation EIA to evaluate the relative sensitivity of standard testing procedures.

RESULTS

Between 2007 and 2008 1191 participants were recruited. The prevalence of HIV infection was 3.2% (38/1191; 95% CI 2.2% to 4.2%) overall and 10.5% (25/237; 95% CI 6.6% to 14.5%) among men who reported sex with men (MSM). The prevalence of acute or recent HIV infection was 0.2% (95% CI 0% to 0.4%) overall and 0.8% (95% CI 0% to 2.0%) among MSM. Compared with third-generation EIA testing, both fourth-generation EIA and RNA PCR increased the rate of HIV case identification by 5.3% overall and by 8.0% within the subpopulation of MSM.

CONCLUSIONS

Screening for acute HIV infection within Peru's resource-limited public health system was acceptable and detected a high prevalence of acute and recent HIV infection among MSM. Additional efforts are needed to screen for, and prevent, transmission of HIV among MSM in Peru during the acute seroconversion stage.

Performance characteristics of the Cavidi ExaVir viral load assay and the ultra-sensitive P24 assay relative to the Roche Monitor HIV-1 RNA assay

BACKGROUND

The Cavidi viral load assay and the ultra-sensitive p24 antigen assay (Up24 Ag) have been suggested as more feasible alternatives to PCR-based HIV viral load assays for use in monitoring patients infected with HIV-1 in resource-limited settings.

OBJECTIVES

To describe the performance of the Cavidi ExaVir Load™ assay (version 2.0) and two versions of the Up24 antigen assay and to characterize their agreement with the Roche Monitor HIV-1 RNA assay (version 1.5).

STUDY DESIGN

Observational study using a convenience sample of 342 plasma specimens from 108 patients enrolled in two ACTG clinical trials to evaluate the performance characteristics of the Up24 Ag assay using two different lysis buffers and the Cavidi ExaVir Load™ assay.

RESULTS

In analysis of agreement with the Roche assay, the Cavidi assay demonstrated superiority to the Up24 Ag assays in accuracy and precision, as well as sensitivity, specificity, and positive and negative predictive values for HIV-1 RNA ≥ 400, ≥ 1000 and ≥ 5000 copies/mL. Logistic performance curves indicated that the Cavidi assay was superior to the Up24 assays for viral loads greater than 650 copies/mL.

CONCLUSIONS

The results suggest that the Cavidi ExaVir Load assay could be used for monitoring HIV-1 viral load in resource-limited settings.

A real-time quantitative assay for hepatitis B DNA virus (HBV) developed to detect all HBV genotypes

Hepatitis B virus (HBV) is a major cause of chronic liver disease worldwide. Besides genotype, quantitative analysis of HBV infection is extensively used for monitoring disease progression and treatment. Affordable viral load monitoring is desirable in resource-limited settings and it has been already shown to be useful in developing countries for other viruses such as Hepatitis C virus (HCV) and HIV. In this paper, we describe the validation of a real-time PCR assay for HBV DNA quantification with TaqMan chemistry and MGB probes. Primers and probes were designed using an alignment of sequences from all HBV genotypes in order to equally amplify all of them. The assay is internally controlled and was standardized with an international HBV panel. Its efficacy was evaluated comparing the results with two other methods: Versant HBV DNA Assay 3.0 (bDNA, Siemens, NY, USA) and another real-time PCR from a reference laboratory. Intra-assay and inter-assay reproducibilities were determined and the mean of CV values obtained were 0.12 and 0.09, respectively. The assay was validated with a broad dynamic range and is efficient for amplifying all HBV genotypes, providing a good option to quantify HBV DNA as a routine procedure, with a cheap and reliable protocol.

Measures of site resourcing predict virologic suppression, immunologic response and HIV disease progression following highly active antiretroviral therapy (HAART) in the TREAT Asia HIV Observational Database (TAHOD)

OBJECTIVES

Surrogate markers of HIV disease progression are HIV RNA in plasma viral load (VL) and CD4 cell count (immune function). Despite improved international access to antiretrovirals, surrogate marker diagnostics are not routinely available in resource-limited settings. Therefore, the objective was to assess effects of economic and diagnostic resourcing on patient treatment outcomes.

METHODS

Analyses were based on 2333 patients initiating highly active antiretroviral therapy (HAART) from 2000 onwards. Sites were categorized by World Bank country income criteria (high/low) and annual frequency of VL (> or = 3, 1-2 or <1) or CD4 (> or = 3 or <3) testing. Endpoints were time to AIDS/death and change in CD4 cell count and VL suppression (<400 HIV-1 RNA copies/mL) at 12 months. Demographics, Centers for Disease Control and Prevention (CDC) classification, baseline VL/CD4 cell counts, hepatitis B/C coinfections and HAART regimen were covariates. Time to AIDS/death was analysed by proportional hazards models. CD4 and VL endpoints were analysed using linear and logistic regression, respectively.

RESULTS

Increased disease progression was associated with site-reported VL testing less than once per year [hazard ratio (HR)=1.4; P=0.032], severely symptomatic HIV infection (HR=1.4; P=0.003) and hepatitis C virus coinfection (HR=1.8; P=0.011). A total of 1120 patients (48.2%) had change in CD4 cell count data. Smaller increases were associated with older age (P<0.001) and 'Other' HIV source exposures, including injecting drug use and blood products (P=0.043). A total of 785 patients (33.7%) contributed to the VL suppression analyses. Patients from sites with VL testing less than once per year [odds ratio (OR)=0.30; P<0.001] and reporting 'Other' HIV exposures experienced reduced suppression (OR=0.28; P<0.001).

CONCLUSION

Low measures of site resourcing were associated with less favourable patient outcomes, including a 35% increase in disease progression in patients from sites with VL testing less than once per year.

Advances in developing HIV-1 viral load assays for resource-limited settings

Commercial HIV-1 RNA viral load assays have been routinely used in developed countries to monitor antiretroviral treatment (ART). However, these assays require expensive equipment and reagents, well-trained operators, and established laboratory infrastructure. These requirements restrict their use in resource-limited settings where people are most afflicted with the HIV-1 epidemic. Inexpensive alternatives such as the Ultrasensitive p24 assay, the reverse transcriptase (RT) assay and in-house reverse transcription quantitative polymerase chain reaction (RT-qPCR) have been developed. However, they are still time-consuming, technologically complex and inappropriate for decentralized laboratories as point-of-care (POC) tests. Recent advances in microfluidics and nanotechnology offer new strategies to develop low-cost, rapid, robust and simple HIV-1 viral load monitoring systems. We review state-of-the-art technologies used for HIV-1 viral load monitoring in both developed and developing settings. Emerging approaches based on microfluidics and nanotechnology, which have potential to be integrated into POC HIV-1 viral load assays, are also discussed.

Immiscible phase nucleic acid purification eliminates PCR inhibitors with a single pass of paramagnetic particles through a hydrophobic liquid

Extraction and purification of nucleic acids from complex biological samples for PCR are critical steps because inhibitors must be removed that can affect reaction efficiency and the accuracy of results. This preanalytical processing generally involves capturing nucleic acids on microparticles that are then washed with a series of buffers to desorb and dilute out interfering substances. We have developed a novel purification method that replaces multiple wash steps with a single pass of paramagnetic particles (PMPs) though an immiscible hydrophobic liquid. Only two aqueous solutions are required: a lysis buffer, in which nucleic acids are captured on PMPs, and an elution buffer, in which they are released for amplification. The PMPs containing the nucleic acids are magnetically transported through a channel containing liquid wax that connects the lysis chamber to the elution chamber in a specially designed cartridge. Transporting PMPs through the immiscible phase yielded DNA and RNA as pure as that obtained after extensive wash steps required by comparable purification methods. Our immiscible-phase process has been applied to targets in whole blood, plasma, and urine and will enable the development of faster and simpler purification systems.

Development of a microfluidic system for measuring HIV-1 viral load

The World Health Organization (WHO) is rapidly expanding antiretroviral treatment (ART) in sub-Saharan countries. However, virological failure of ART is rarely monitored due to the lack of affordable and sustainable viral load assays suitable for resource-limited settings. Here, we report a prototype of a rapid virus detection method based on microfluidic technologies. In this method, HIV-1 particles from 10 µL whole blood were captured by anti-gp120 antibody coated on the microchannel surface and detected by dual fluorescence signals under microscopy. Next, captured HIV-1 particles were counted using the free software, ImageJ (http://rsbweb.nih.gov/ij/). This rapid HIV-1 detection method has potential to be further developed for viral load monitoring at resource-limited settings.

Nucleic acid assay system for tier II laboratories and moderately complex clinics to detect HIV in low-resource settings

There is a clear need for an instrument-free molecular diagnostic system for detecting human immunodeficiency virus type 1 (HIV-1) RNA or DNA that can be used in developing countries. Such a test could be used for early diagnosis of HIV-1 infection during infancy and could serve as a surrogate end point for vaccine trials. We developed the IsoAmp HIV-1 assay (BioHelix Corporation), which targets the HIV-1 gag gene with use of isothermal reverse-transcription helicase-dependent amplification chemistry. The IsoAmp HIV assay uses a disposable amplicon containment device with an embedded vertical-flow DNA detection strip to detect the presence of HIV-1 amplicons. The vertical-flow DNA detection strip has a control line to validate the performance of the device and a test line to detect the analyte. The analyte is detected by a sandwich immunoassay for reporter moieties on a capture probe and a detection probe. The control line consists of the detection probe reporter moiety conjugated to the vertical-flow DNA detection strip. The preliminary limit of detection of the IsoAmp HIV assay was evaluated by testing serial dilutions of HIV-1 armored RNA (Assuragen). We found that 21 (75%) of 28 assays yielded positive results when 50 copies of HIV-1 armored RNA were input into the IsoAmp HIV reaction.

Concentration and purification of human immunodeficiency virus type 1 virions by microfluidic separation of superparamagnetic nanoparticles

The low concentration and complex sample matrix of many clinical and environmental viral samples presents a significant challenge in the development of low cost, point-of-care viral assays. To address this problem, we investigated the use of a microfluidic passive magnetic separator combined with on-chip mixer to both purify and concentrate whole-particle human immunodeficiency virus type 1 (HIV-1) virions. Virus-containing plasma samples are first mixed to allow specific binding of the viral particles with antibody-conjugated superparamagnetic nanoparticles, and several passive mixer geometries were assessed for their mixing efficiencies. The virus-nanoparticle complexes are then separated from the plasma in a novel magnetic separation chamber, where packed micrometer-sized ferromagnetic particles serve as high magnetic gradient concentrators for an externally applied magnetic field. Thereafter, a viral lysis buffer was flowed through the chip and the released HIV proteins were assayed off-chip. Viral protein extraction efficiencies of 62% and 45% were achieved at 10 and 30 muL/min throughputs, respectively. More importantly, an 80-fold concentration was observed for an initial sample volume of 1 mL and a 44-fold concentration for an initial sample volume of 0.5 mL. The system is broadly applicable to microscale sample preparation of any viral sample and can be used for nucleic acid extraction as well as 40-80-fold enrichment of target viruses.

Nano/Microfluidics for diagnosis of infectious diseases in developing countries

Nano/Microfluidic technologies are emerging as powerful enabling tools for diagnosis and monitoring of infectious diseases in both developed and developing countries. Miniaturized nano/microfluidic platforms that precisely manipulate small fluid volumes can be used to enable medical diagnosis in a more rapid and accurate manner. In particular, these nano/microfluidic diagnostic technologies are potentially applicable to global health applications, since they are disposable, inexpensive, portable, and easy-to-use for detection of infectious diseases. In this paper, we review recent advances in nano/microfluidic technologies for clinical point-of-care applications at resource-limited settings in developing countries.

Monitoring for treatment failure in patients on first-line antiretroviral treatment in resource-constrained settings

PURPOSE OF REVIEW

The number of people living with HIV in low-income and middle-income countries (LMICs), who will fail first-line treatment and benefit from regimen switching, will steadily increase in the coming years. The diagnosis of treatment failure in many settings is challenging because of limited access to plasma HIV RNA testing. This article summarizes recent studies in LMICs, investigating the diagnosis of treatment failure.

RECENT FINDINGS

WHO recommended clinico-immunological criteria to identify first-line treatment failure, which have a low sensitivity and positive predictive value. The addition of adherence criteria or alternative clinical and laboratory markers improves performance, but overall the results are suboptimal. This situation leads to both delayed and inappropriately premature switching to more expensive second-line agents. The cost-effectiveness of alternative monitoring strategies is debated, but there is increasing interest in the use of viral load testing to confirm virological failure before switching to second-line therapy. However, access to viral load testing in LMICs remains limited and a simple point-of-care assay is not yet available.

SUMMARY

Monitoring the efficacy of antiretroviral therapy in LMICs remains a critical challenge. Current research priorities include the development of simpler, cheaper assays and optimizing monitoring strategies based on currently available technologies.

High prevalence of symptomatic acute HIV infection in an outpatient ward in southern Mozambique: identification and follow-up

OBJECTIVES

To determine the prevalence of acute HIV infection (AHI) within the HIV-seronegative adult population presenting with reported fever in a district hospital in southern Mozambique and evaluate clinical, immunological and virological parameters of AHI.

DESIGN

This is a prospective observational study.

METHODS

Three hundred and forty-six adults presenting with reported fever at an outpatient ward at the Manhiça District Hospital in Mozambique were screened for AHI by HIV rapid serology testing, followed by HIV-RNA testing in HIV-seronegative individuals. Plasma from HIV-seronegative patients was pooled in the ratio of 1: 5 for HIV-RNA testing. Whole blood was used for Plasmodium falciparum rapid test determination at screening visit. Follow-up visits at day 7, 4 and 10 months included clinical examination, HIV serotesting and assessment of HIV-RNA, CD4 cell counts and percentage of activated CD8 T cells.

RESULTS

HIV serotesting revealed that 37.8% (95% confidence interval 32.7-43.2) of the adults had previously undiagnosed established HIV infection. Among the HIV-seronegative patients, 3.3% (95% confidence interval 1.3-6.7) were found to have AHI as demonstrated by positive HIV-1 RNA testing. Median HIV-1 RNA levels at diagnosis of AHI were 6.21 log10 copies/ml (interquartile range 5.92-6.41) and significantly higher than median HIV-RNA load at 4 months. At day 7 after screening, patients showed a median CD4 cell count of 384 cells/microl (interquartile range 239-441) and a median percentage of activated CD8 T cells of 68.4% (interquartile range 59.6-87.8).

CONCLUSION

Of patients reporting with fever, 3.3% were shown to be potentially due to AHI. High prevalence of AHI in southern African populations may warrant investigation of tools and target populations for AHI screening as a novel way to address HIV prevention.

Pooled nucleic acid testing to identify antiretroviral treatment failure during HIV infection

BACKGROUND

Pooling strategies have been used to reduce the costs of polymerase chain reaction-based screening for acute HIV infection in populations in which the prevalence of acute infection is low (less than 1%). Only limited research has been done for conditions in which the prevalence of screening positivity is higher (greater than 1%).

METHODS AND RESULTS

We present data on a variety of pooling strategies that incorporate the use of polymerase chain reaction-based quantitative measures to monitor for virologic failure among HIV-infected patients receiving antiretroviral therapy. For a prevalence of virologic failure between 1% and 25%, we demonstrate relative efficiency and accuracy of various strategies. These results could be used to choose the best strategy based on the requirements of individual laboratory and clinical settings such as required turnaround time of results and availability of resources.

CONCLUSIONS

Virologic monitoring during antiretroviral therapy is not currently being performed in many resource-constrained settings largely because of costs. The presented pooling strategies may be used to significantly reduce the cost compared with individual testing, make such monitoring feasible, and limit the development and transmission of HIV drug resistance in resource-constrained settings. They may also be used to design efficient pooling strategies for other settings with quantitative screening measures.

HIV-1 and HCV detection in dried blood spots by SYBR Green multiplex real-time RT-PCR

Dried blood spot (DBS) is a reliable method of blood collection used for the diagnosis of several human diseases. DBS is particularly useful for diagnosing children and for the screening of high-risk populations especially in countries where health facilities are not readily accessible. This report describes a qualitative SYBR Green-based real-time multiplex RT-PCR for the simultaneous detection of hepatitis C virus (HCV) and human immunodeficiency virus type 1 (HIV-1) genomes in DBS. Specific viral amplicons were identified in the same sample by their distinctive melting temperatures. The analysis of scalar concentrations of the reference samples indicated that this multiplex procedure detects at least 2500 copies/ml of HCV and 400 copies/ml of HIV-1. HIV-1 and HCV viral loads in 20 patients infected with HIV-1 and/or HCV and in 5 healthy blood donors were also tested, confirming the sensitivity and specificity of the assay. This method may represent a reliable alternative for the detection of HIV-1/HCV co-infection, in rapid and relatively inexpensive screening programmes.

Research needs and challenges in the development of HIV diagnostic and treatment monitoring tests for use in resource-limited settings

PURPOSE OF REVIEW

The aim of this article is to review research priorities for current and new technologies to diagnose HIV and to monitor treatment response, including technologies to enumerate CD4 cell counts and quantify plasma viral load, in resource-limited settings.

RECENT FINDINGS

Numerous challenges remain before HIV diagnostic and treatment monitoring technologies can be broadly implemented, especially in rural areas. New technologies that are less costly and complex to use are in development and may be better suited than current technologies for use in resource-limited settings. Investment into research activities is needed for development, evaluation and validation of new technologies. The lack of clarity in the process for evaluation and validation for these technologies affects country and program-level decisions on the appropriateness of technologies for individual settings. Implementation research is needed to assess how best to use CD4 and viral load to guide initiation and management of antiretroviral treatment, as well as how best to scale up diagnosis of HIV serostatus in infants. Studies also need to be conducted to determine if the same CD4 cutoffs can be used in resource-limited settings for initiating antiretroviral therapy and prophylaxis against opportunistic infections due to potential regional differences and the impact of other common co-morbidities on CD4 cell counts.

SUMMARY

Increased availability of antiretroviral therapy in resource-limited settings increases the need for reliable, less costly and simpler to use HIV diagnostic and treatment monitoring technologies. Global leadership is needed to coordinate the research and development necessary to ensure that HIV diagnostic and treatment monitoring technologies are properly evaluated in the setting where they will be used.

A rapid real-time PCR assay for the detection of HIV-1 proviral DNA using double-stranded primer

In this study, a rapid real-time PCR assay to detect HIV-1 proviral DNA in whole blood was developed using a novel double-stranded primer that does not require a target-specific fluorescent probe or intercalating dye systems. Co-amplification of a human gene RNase P served as the internal control to monitor the efficiency of the DNA extraction and PCR amplification. The HIV-1 amplification efficiency was 100% and could amplify 1 copy of HIV-1 DNA 64% of the time and all attempts to amplify 4 copies were successful in less than 51 min. All 22 HIV-1 sero-positive and 20 sero-negative whole blood specimens tested were classified correctly by this assay. In addition, 22 cultured PBMC specimens infected with various HIV-1 subtypes or CRF (A=2, AC=1, B=4, C=3, D=3, AE=2, F=1, BF=2, G=4) were amplified equally well with a similar threshold cycle (C(t)) number (22.9+/-1.2). The high amplification efficiency and short PCR cycles were in part due to the short target sequence amplified by eliminating the probe-binding sequence between the primers. This assay may be useful as an alternative confirmation test in a variety of HIV testing venues.

HIV-1 viral load and phenotypic antiretroviral drug resistance assays based on reverse transcriptase activity in comparison to amplification based HIV-1 RNA and genotypic assays

BACKGROUND

Amplification based HIV-1 viral load and genotypic resistance assays are expensive, technologically complex and may be difficult to implement in resource limited settings. Inexpensive, simpler assays are urgently needed.

OBJECTIVES

To determine the suitability of the ExaVir Load and ExaVir Drug assays for use in patient monitoring.

STUDY DESIGN

Specimens from 108 adults were used to compare ExaVir Load HIV-1 RT to Amplicor HIV-1 Monitor HIV-1 RNA, and ExaVir Drug phenotype to HIV GenoSure genotype.

RESULTS

HIV-1 RT and HIV-1 RNA levels were comparable (Pearson correlation coefficient 0.83). Most (94%) had detectable results in both assays. The mean difference (HIV-1 RT minus HIV-1 RNA) was -0.21 log(10)cps/mLequiv. Relationship between HIV-1 RT and HIV-1 RNA was not affected by RT mutations, CD4 cell count, or efavirenz (EFV) or nevirapine (NVP) use. Phenotypes were generally consistent with genotype findings for EFV, but not for NVP. Most patients (93.9%) with phenotypic EFV resistance had at least one EFV mutation, while 78.0% of patients with phenotypic NVP resistance had at least one NVP mutation. Eleven of 49 samples tested for EFV susceptibility were found resistant (n=2) or with reduced susceptibility (n=9) despite the absence of genotypic resistance. Eleven of 45 samples tested for NVP susceptibility were found resistant (n=9) or with reduced susceptibility (n=2) with no evidence of genotypic mutations.

CONCLUSIONS

The ExaVir Load assay performed well and may be an alternative to amplification based techniques for HIV-1 RNA quantification. The ExaVir Drug assay for phenotypic resistance testing requires further evaluation, especially for NVP.

Assessment of the low-cost Cavidi ExaVir Load assay for monitoring HIV viral load in pediatric and adult patients

BACKGROUND

Viral load (VL) is a critical marker for monitoring HIV disease progression and response to antiretroviral therapy. In resource-constrained settings, there is a need for a simple and inexpensive assay to monitor infected adults and children.

METHODS

We compared versions 2 and 3 of the ExaVir Load assay, Cavidi AB (HIV RT) with the Roche, COBAS Amplicor HIV-1 Monitor assay (HIV RNA) for quantifying HIV VL.

RESULTS

The HIV RT version 2 assay showed good sensitivity with detection in 94% of samples with HIV RNA >1000 copies per milliliter. Adult samples were tested using HIV RT version 2 (n = 35) and version 3 (n = 23) assays with plasma volumes of 1 mL (recommended), 0.5 mL and 0.25 mL in comparison with HIV RNA. The HIV RT and HIV RNA assay results were comparable when tested using different volumes. Comparison of results from pediatric samples (n = 27), tested using 1 mL and a smaller volume by HIV RT version 2 were not significantly different.

CONCLUSIONS

The HIV RT assay was comparable to the HIV RNA assay with sensitivity approaching that of HIV RNA. Smaller volumes than the recommended 1 mL can be used, improving utility of this assay for pediatric monitoring.

Evaluation of the Abbott m2000rt RealTime HIV-1 assay with manual sample preparation compared with the ROCHE COBAS AmpliPrep/AMPLICOR HIV-1 MONITOR v1.5 using specimens from East Africa

The performance of the Abbott m2000rt RealTime HIV-1 assay (RealTime HIV-1) with manual sample preparation was compared against the ROCHE COBAS AmpliPrep/AMPLICOR HIV-1 MONITOR Test v1.5 (CAP/CA HIV-1) using samples collected from 100 donors infected with HIV and 20 donors not infected with HIV in northern Tanzania where HIV-1 subtypes A, C, D, and their recombinant forms predominate. The RealTime HIV-1 appeared to have more within-run variability at high HIV-1 RNA concentrations, but total assay variability over the dynamic range tested was within the manufacturer's claim of <0.3 SD copies/mL. Accuracy studies showed 100% concordance for positive and negative values. When continuous values were examined, CAP/CA HIV-1 yielded higher values than the RealTime HIV-1 at higher nominal HIV-1 RNA concentrations. The RealTime HIV-1 assay showed excellent linearity between 2.5 and 7.0 log copies/mL. Of negative samples, 100% showed negative results, and >95% of samples with nominal concentrations of 40 copies/mL were detected at > or = 40 copies/mL by RealTime HIV-1. Manual sample preparation may contribute to higher total assay variability. This study suggests that the Abbott m2000rt RealTime HIV-1 assay with manual sample preparation is an acceptable and feasible alternative to the conventional ROCHE COBAS AmpliPrep/AMLICOR HIV-1 Monitor v1.5 assay and that the RealTime HIV-1 assay performs well on samples from East Africa.

Monitoring virologic responses to antiretroviral therapy in HIV-infected adults in Kenya: evaluation of a low-cost viral load assay

Background

A key advantage of monitoring HIV viral load (VL) in persons receiving antiretroviral therapy (ART) is the ability to detect virologic failure before clinical deterioration or resistance occurs. Detection of virologic failure will help clarify the need for enhanced adherence counseling or a change to second- line therapy. Low-cost, locally performable alternates to expensive VL assays are needed where resources are limited.

Methodology/Principal Findings

We monitored the response to 48-week ART in 100 treatment-naïve Kenyan adults using a low-cost VL measurement, the Cavidi reverse transcriptase (RT) assay and gold-standard assays, Roche RNA PCR and Bayer Versant HIV-1 RNA (bDNA) assays. In Altman-Bland plots, the mean difference in viral loads between the three assays was small (<0.5 log₁₀ copies/mL). However, the limits of agreement between the methods exceeded the biologically relevant change of 0.5 log copies/ml. Therefore, the RT assay cannot be used interchangeably with the other assays to monitor individual patients. The RT assay was 100% sensitive in detecting viral loads of ≥400 copies/ml compared to gold-standard assays. After 24 weeks of treatment, viral load measured by the RT assay was undetectable in 95% of 65 patients with undetectable RNA PCR VL (<400 copies/ml), 90% of 67 patients with undetectable bDNA VL, and 96% of 57 patients with undetectable VL in both RNA PCR and bDNA assays. The negative predictive value of the RT assay was 100% compared to either assay; the positive predictive value was 86% compared to RNA PCR and 70% compared to bDNA.

Conclusion

The RT assay compared well with gold standard assays. Our study highlights the importance of not interchanging viral load assays when monitoring an individual patient. Furthermore, the RT assay may be limited by low positive predictive values when used in populations with low prevalence of virologic failure.

Monitoring HIV vaccine trial participants for primary infection: studies in the SIV/macaque model

OBJECTIVES

The ability to detect and quantify acute HIV-1 infection prior to seroconversion would be an important tool for use in HIV vaccine clinical efficacy trials. We have utilized the SIV/rhesus monkey model to evaluate whether samples more easily obtained than peripheral blood might be used for intensive monitoring of vaccine trial participants.

METHODS

We have evaluated viral loads in peripheral blood, saliva, feces, and urine of five rhesus monkeys during primary SIVmac251 infection by quantitative real-time PCR. As an alternative to the direct monitoring of frozen samples, we have also developed a fully quantitative viral load assay utilizing dried blood spots.

RESULTS

Although all compartments were found to harbor viral RNA during primary infection, viral RNA could be detected in the peripheral compartments only when levels of plasma viremia exceed a threshold value of 10 RNA copies/ml. We found no direct correlation between viral burden in plasma and saliva, feces, or urine viral loads. Importantly, both dried saliva and whole blood spots can be used for viral detection. Quantitative whole blood or plasma spotting correlated well with viral burden in plasma during both the acute and set point phase of infection.

CONCLUSION

Dried blood spots are amenable to rapid quantitative viral load testing. Whole blood spotting has a significant logistical benefit as it requires low blood volumes and no blood processing. Saliva or dried saliva spots or both are potential candidates for acute phase diagnostic screening. These studies indicate the feasibility of intensive monitoring of HIV-1 vaccine trial participants for virus acquisition in resource-limited settings.

Evaluation of the Cavidi ExaVir Load assay (version 3) for plasma human immunodeficiency virus type 1 load monitoring

We evaluated the new low-cost ExaVir Load (version 3) reverse transcriptase viral load assay against the Roche Cobas Amplicor assay. Results for samples tested using the reverse transcriptase assay correlated well with those obtained with the Roche assay (r = 0.85; n = 202). The version 3 reverse transcriptase assay shows improved sensitivity compared to the previous version.

Virological monitoring and resistance to first-line highly active antiretroviral therapy in adults infected with HIV-1 treated under WHO guidelines: a systematic review and meta-analysis

Antiretroviral-therapy rollout in resource-poor countries is often associated with limited, if any, HIV-RNA monitoring. The effect of variable monitoring on the emergence of resistance after therapy with commonly used drug combinations was assessed by systematic review of studies reporting resistance in patients infected with HIV with a CD4 count of fewer than 200 cells per muL treated with two nucleoside analogues (including a thymidine analogue) and a non-nucleoside reverse transcriptase inhibitor. 8376 patients from eight cohorts and two prospective studies were analysed. Resistance at virological failure to non-nucleoside reverse transcriptase inhibitors at 48 weeks was 88.3% (95% CI 82.2-92.9) in infrequently monitored patients, compared with 61.0% (48.9-72.2) in frequently monitored patients (p<0.001). Lamivudine resistance was 80.5% (72.9-86.8) and 40.3% (29.1-52.2) in infrequently and frequently monitored patients, respectively (p<0.001); the prevalence of at least one thymidine analogue mutation was 27.8% (21.2-35.2) and 12.1% (5.9-21.4), respectively (p<0.001). Genotypic resistance at 48 weeks to lamivudine, nucleoside reverse transcriptase inhibitors (thymidine analogue mutations), and non-nucleoside reverse transcriptase inhibitors appears substantially higher in less frequently monitored patients. This Review highlights the need for cheap point-of-care viral-load tests to identify early viral failures and limit the emergence of resistance.

Sequence-specific detection method for reverse transcription, loop-mediated isothermal amplification of HIV-1

HIV diagnosis at the point-of-care or in resource-limited settings poses considerable challenges due to time and cost limitations. Currently, nucleic acid-based tests are the only reliable method for diagnosing recent infections during the window period post-infection and pre-seroconversion, but these tests are only suitable for well-equipped laboratory settings. The reverse transcription loop-mediated isothermal amplification (RT-LAMP) technology exhibits characteristics that are ideal for the development of a rapid, cost-effective nucleic acid-based test for detection of HIV DNA and RNA. In this study, a sequence-specific detection method was developed for immediate, naked-eye visualization of RT-LAMP products with high sensitivity and specificity. The rapid detection method was incorporated into the HIV-1-specific RT-LAMP assay and validated using minute volumes of whole blood from HIV-1-infected individuals. Together with the minimal sample preparation time and one-step, isothermal amplification reaction, the sequence-specific detection method adds to the overall versatility of the RT-LAMP assay and enhances the applicability for use at point-of-care or resource-limited sites.

Low-cost HIV-1 diagnosis and quantification in dried blood spots by real time PCR

Background

Rapid and cost-effective methods for HIV-1 diagnosis and viral load monitoring would greatly enhance the clinical management of HIV-1 infected adults and children in limited-resource settings. Recent recommendations to treat perinatally infected infants within the first year of life are feasible only if early diagnosis is routinely available. Dried blood spots (DBS) on filter paper are an easy and convenient way to collect and transport blood samples. A rapid and cost effective method to diagnose and quantify HIV-1 from DBS is urgently needed to facilitate early diagnosis of HIV-1 infection and monitoring of antiretroviral therapy.

Methods and Findings

We have developed a real-time LightCycler (rtLC) PCR assay to detect and quantify HIV-1 from DBS. HIV-1 RNA extracted from DBS was amplified in a one-step, single-tube system using primers specific for long-terminal repeat sequences that are conserved across all HIV-1 clades. SYBR Green dye was used to quantify PCR amplicons and HIV-1 RNA copy numbers were determined from a standard curve generated using serially diluted known copies of HIV-1 RNA. This assay detected samples across clades, has a dynamic range of 5 log₁₀, and %CV <8% up to 4 log₁₀ dilution. Plasma HIV-1 RNA copy numbers obtained using this method correlated well with the Roche Ultrasensitive (r = 0.91) and branched DNA (r = 0.89) assays. The lower limit of detection (95%) was estimated to be 136 copies. The rtLC DBS assay was 2.5 fold rapid as well as 40-fold cheaper when compared to commercial assays. Adaptation of the assay into other real-time systems demonstrated similar performance.

Conclusions

The accuracy, reliability, genotype inclusivity and affordability, along with the small volumes of blood required for the assay suggest that the rtLC DBS assay will be useful for early diagnosis and monitoring of pediatric HIV-1 infection in resource-limited settings.

Evaluation of the Abbott investigational use only realtime HIV-1 assay and comparison to the Roche Amplicor HIV-1 monitor test, version 1.5

Abbott Molecular's m2000 system and RealTime HIV-1 assay (RealTime) were evaluated for sensitivity, reproducibility, linearity, ability to detect diverse HIV-1 subtypes/groups, and correlation to the Roche AMPLICOR HIV-1 MONITOR Test, Version 1.5 (Amplicor). The limit of detection was determined using the second International World Health Organization Standard and Viral Quality Assurance standard material. Serial dilutions of four patient samples were used to determine inter- and intra-assay reproducibility and linearity. Samples representing HIV-1 groups M, N, and O were evaluated in the RealTime, Amplicor, and Siemens Versant HIV-1 branched chain DNA 3.0 (Versant) assays. Archived Amplicor-tested samples were tested with the 1 ml, 0.5 ml, and 0.6 ml versions of the RealTime assay. Probit analysis predicts a limit of detection of 21.94 IU/ml using the World Health Organization Standard and 26.54 copies/ml using Viral Quality Assurance material with the 1 ml assay. Linearity and reproducibility were very good between approximately 1.60 to 6.0 log(10) copies/ml. All three assays produced similar measurements for all Group M subtypes tested; the RealTime assay was the only assay that detected all three Group O samples tested. Correlation with the Amplicor assay was good, although the RealTime assay measured between 0.342 and 0.716 log(10) copies/ml lower on average, depending on the input volume. The automated RealTime assay exhibits excellent sensitivity, dynamic range, reproducibility, and group/subtype detection, albeit with consistently lower values than Amplicor.

Evaluation of the Abbott m2000 RealTime human immunodeficiency virus type 1 (HIV-1) assay for HIV load monitoring in South Africa compared to the Roche Cobas AmpliPrep-Cobas Amplicor, Roche Cobas AmpliPrep-Cobas TaqMan HIV-1, and BioMerieux NucliSENS EasyQ HIV-1 assays

The implementation of antiretroviral therapy demands the need for increased access to viral load (VL) monitoring. Newer real-time VL testing technologies are faster and have larger dynamic ranges and fully automated extraction to benefit higher throughputs in resource-poor environments. The Abbott RealTime human immunodeficiency virus type 1 (HIV-1) assay was evaluated as a new option for testing for HIV-1 subtype C in South Africa, and its performance was compared to the performance of existing assays (the Cobas AmpliPrep-Cobas TaqMan HIV-1, version 1, assay; the AmpliPrep-Cobas Monitor standard HIV-1 assay; and the NucliSENS EasyQ-EasyMag HIV-1 assay) in a high-throughput laboratory. The total precision of the RealTime HIV-1 assay was acceptable over all viral load ranges. This assay compared most favorably with the Cobas AmpliPrep-Cobas TaqMan HIV-1 assay (R(2) = 0.904), with a low standard deviation of difference being detected (0.323 copies/ml). The bias against comparator assays ranged from -0.001 copies/ml to -0.228 copies/ml. Variability in the reporting of VLs for a 20-member subtype panel compared to the variability of other assays was noted with subtypes G and CRF02-AG. The RealTime HIV-1 assay can test 93 samples per day with minimal manual preparation, less staff, and the minimization of contamination through automation. This assay is suitable for HIV-1 subtype C VL quantification in South Africa.

A highly sensitive and dynamic immunofluorescent cytometric bead assay for the detection of HIV-1 p24

Nucleic acid measurements are used to follow HIV-1 viral load in clinical applications while p24 ELISA is commonly used to monitor HIV-1 replication in research settings. Current ELISA assays are expensive and offer a narrow dynamic measurement range. This report describes a simple, sensitive and inexpensive bead-based assay offering a wide dynamic measurement range. This cytometric bead assay allows the detection of p24 concentrations over 4 orders of magnitude from less than 0.4pg to up to 20,000pgml(-1) in a volume of 50microl and can be combined with other measurements.

Development and evaluation of a clinical algorithm to monitor patients on antiretrovirals in resource-limited settings using adherence, clinical and CD4 cell count criteria

Background

Routine viral load monitoring of patients on antiretroviral therapy (ART) is not affordable in most resource-limited settings.

Methods

A cross-sectional study of 496 Ugandans established on ART was performed at the Infectious Diseases Institute, Kampala, Uganda. Adherence, clinical and laboratory parameters were assessed for their relationship with viral failure by multivariate logistic regression. A clinical algorithm using targeted viral load testing was constructed to identify patients for second-line ART. This algorithm was compared with the World Health Organization (WHO) guidelines, which use clinical and immunological criteria to identify failure in the absence of viral load testing.

Results

Forty-nine (10%) had a viral load of >400 copies/mL and 39 (8%) had a viral load of >1000 copies/mL. An algorithm combining adherence failure (interruption >2 days) and CD4 failure (30% fall from peak) had a sensitivity of 67% for a viral load of >1000 copies/mL, a specificity of 82%, and identified 22% of patients for viral load testing. Sensitivity of the WHO-based algorithm was 31%, specificity was 87%, and would result in 14% of those with viral suppression (<400 copies/mL) being switched inappropriately to second-line ART.

Conclusion

Algorithms using adherence, clinical and CD4 criteria may better allocate viral load testing, reduce the number of patients continued on failing ART, and limit the development of resistance.

COP9-associated CSN5 regulates exosomal protein deubiquitination and sorting

Ubiquitinated endosomal proteins that are deposited into the lumens of multivesicular bodies are either sorted for lysosomal-mediated degradation or secreted as exosomes into the extracellular milieu. The mechanisms that underlie the sorting of cellular cargo proteins are currently unknown. In this study, we show that the COP9 signalosome (CSN)-associated protein CSN5 quantitatively regulated proteins that were sorted into exosomes. Western blot analysis of exosomal proteins indicated that small interfering (si)RNA knockdown of CSN5 results in increased levels of both ubiquitinated and non-ubiquitinated exosomal proteins, including heat shock protein 70, in comparison with exosomes isolated from the supernatants of 293 cells transfected with scrambled siRNA. Furthermore, 293 cells transfected with JAB1/MPN/Mov34 metalloenzyme domain-deleted CSN5 produced exosomes with higher levels of ubiquitinated heat shock protein 70, which did not affect non-ubiquitinated heat shock protein 70 levels. The loss of COP9-associated deubiquitin activity of CSN5 also led to the enhancement of HIV Gag that was sorted into exosomes as well as the promotion of HIV-1 release, suggesting that COP9-associated CSN5 regulates the sorting of a number of exosomal proteins in both a CSN5 JAB1/MPN/Mov34 metalloenzyme domain-dependent and -independent manner. We propose that COP9-associated CSN5 regulates exosomal protein sorting in both a deubiquitinating activity-dependent and -independent manner, which is contrary to the current idea of ubiquitin-dependent sorting of proteins to exosomes.

A novel diagnostic target in the hepatitis C virus genome

BACKGROUND

Detection and quantification of hepatitis C virus (HCV) RNA is integral to diagnostic and therapeutic regimens. All molecular assays target the viral 5'-noncoding region (5'-NCR), and all show genotype-dependent variation of sensitivities and viral load results. Non-western HCV genotypes have been under-represented in evaluation studies. An alternative diagnostic target region within the HCV genome could facilitate a new generation of assays.

METHODS AND FINDINGS

In this study we determined by de novo sequencing that the 3'-X-tail element, characterized significantly later than the rest of the genome, is highly conserved across genotypes. To prove its clinical utility as a molecular diagnostic target, a prototype qualitative and quantitative test was developed and evaluated multicentrically on a large and complete panel of 725 clinical plasma samples, covering HCV genotypes 1-6, from four continents (Germany, UK, Brazil, South Africa, Singapore). To our knowledge, this is the most diversified and comprehensive panel of clinical and genotype specimens used in HCV nucleic acid testing (NAT) validation to date. The lower limit of detection (LOD) was 18.4 IU/ml (95% confidence interval, 15.3-24.1 IU/ml), suggesting applicability in donor blood screening. The upper LOD exceeded 10(-9) IU/ml, facilitating viral load monitoring within a wide dynamic range. In 598 genotyped samples, quantified by Bayer VERSANT 3.0 branched DNA (bDNA), X-tail-based viral loads were highly concordant with bDNA for all genotypes. Correlation coefficients between bDNA and X-tail NAT, for genotypes 1-6, were: 0.92, 0.85, 0.95, 0.91, 0.95, and 0.96, respectively; X-tail-based viral loads deviated by more than 0.5 log10 from 5'-NCR-based viral loads in only 12% of samples (maximum deviation, 0.85 log10). The successful introduction of X-tail NAT in a Brazilian laboratory confirmed the practical stability and robustness of the X-tail-based protocol. The assay was implemented at low reaction costs (US$8.70 per sample), short turnover times (2.5 h for up to 96 samples), and without technical difficulties.

CONCLUSION

This study indicates a way to fundamentally improve HCV viral load monitoring and infection screening. Our prototype assay can serve as a template for a new generation of viral load assays. Additionally, to our knowledge this study provides the first open protocol to permit industry-grade HCV detection and quantification in resource-limited settings.