Salts of Therapeutic Agents: Chemical, Physicochemical, and Biological Considerations

Overcoming Bioavailability Challenges of Dasabuvir and Enabling a Triple-Combination Direct-Acting Antiviral HCV Regimen through a Salt of Very Weak Acid for Oral Delivery

Dasabuvir is a non-nucleoside polymerase inhibitor for the treatment of hepatitis C virus (HCV) infection. It is an extremely weak diacidic drug (pK_a = 8.2 and 9.2) and a prolific solvate former. Due to its exceedingly low aqueous solubility (≤0.127 μg/mL at pH 1-6.8, dose number of 1.31 × 10⁴), crystalline dasabuvir free acid exhibited poor oral bioavailability in initial animal pharmacokinetic (PK) assessment. This necessitated the development of enabling formulation for human clinical studies to achieve the required therapeutic in vivo concentration of dasabuvir. While salt formation has been widely used to enhance the solubility and dissolution rate of solids, this approach has rarely been applied to develop oral solid dosage forms for acidic drugs as weak as dasabuvir due to concerns of rapid disproportionation and crystallization of its free acid. In this contribution, we detail our efforts in identifying dasabuvir monosodium monohydrate as a drug substance that is stable, manufacturable, and, most importantly, significantly enhances the dissolution and oral absorption of this poorly soluble drug. The oral delivery of dasabuvir through the salt approach has enabled the commercialization of the triple-combination direct-acting antiviral HCV regimen, Viekira Pak. The methodologies and solutions identified in targeted studies to overcome technical challenges encountered along the way (i.e., incorporation of polymers to inhibit crystallization and disproportionation and species mapping to enable salt manufacturing process, etc.) can be applied to other insoluble compounds.

Antacids revisited: review on contemporary facts and relevance for self-management

Heartburn and acid regurgitation are the typical symptoms of gastroesophageal reflux. Despite the availability of several treatment options, antacids remain the mainstay treatment for gastroesophageal reflux-related symptoms based on their efficacy, safety, and over-the-counter availability. Antacids are generally recommended for adults and children at least 12 years old, and the FDA recommends antacids as the first-line treatment for heartburn in pregnancy. This narrative review summarizes the mechanism, features, and limitations related to different antacid ingredients and techniques available to study the acid neutralization and buffering capacity of antacid formulations. Using supporting clinical evidence for different antacid ingredients, it also discusses the importance of antacids as OTC medicines and first-line therapies for heartburn, particularly in the era of the COVID-19 pandemic, in which reliance on self-care has increased. The review will also assist pharmacists and other healthcare professionals in helping individuals with heartburn to make informed self-care decisions and educating them to ensure that antacids are used in an optimal, safe, and effective manner.

Application of Quantitative NMR (qHNMR) towards Establishment of Pharmaceutical Reference Standard; A Case of a Ticagrelor Process Impurity

Quantitative proton NMR (qHNMR) methodology was employed for the stoichiometric (free base and the corresponding counterion) assessment of a ticagrelor process impurity, also referred to in the United States Pharmacopeia (USP), Pharmacopeial Forum as Ticagrelor Related Compound A (RC A), [(1R,2S)-2-(3,4-difluorophenyl)cyclopropan-1-amine (R)-mandelate], also called as Tica amine mandelate, a critical impurity that, when present during manufacturing, has a limit of not more than 0.0008%. The Tica amine is also a listed impurity E in the Ticagrelor monograph, in European Pharmacopeia. Because there was no existing NMR spectroscopic method in the literature specific to quantify the counterion (mandelic acid) in Ticagrelor RC A, this study aimed to fill the gap. Accurate stoichiometric measurement of this impurity serves to enhance product quality in the manufacturing of the ticagrelor active pharmaceutical ingredient (API). Using ethylene carbonate as an internal standard (IS), the qHNMR analysis on Ticagrelor impurity, revealed many key characteristics of the test mixture composition, including (free base and counterion). The results demonstrate that qHNMR has great potential for addressing several key quality attributes associated with chemical analyses such as detection, identification, quantification, and purity determination, as well as deriving molecular stoichiometry, all from the single proton spectrum.

Crystal engineering of valproic acid and carbamazepine to improve hygroscopicity and dissolution profile

Sodium valproate, the most common solid form of valproic acid, is highly hygroscopic and carbamazepine has extremely low aqueous solubility. Producing a salt form of valproic acid with tromethamine and a cocrystal form of valproic acid with carbamazepine have been studied as two approaches to improve physicochemical properties of the intended drugs. Characterization methods including differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) are applied to characterize the synthesized salt and cocrystal. The stability of sodium valproate and tromethamine valproate were examined in 33, 53. 75 and 100 percent of relative humidity. The dissolution profile studies were performed in phosphate buffer media (pH =6.8) for carbamazepine (a low soluble drug) and carbamazepine-valprocic acid cocrystal. Tromethamine valproate was more physically stable than sodium valproate in exposure to humidity. Carbamazepine-valproic acid cocrystal did not show an extreme improvement in dissolution profile when compared to carbamazepine, however after 24 hours carbamazepine-valproic acid cocrystal was more soluble than carbamazepine. Valproic acid forms a new salt with tromethamine and it forms a cocrystal with carbamazepine which can effect on physicochemical properties.

A simple quinoline salt derivative is active in vitro against plasmodium Faciparum asexual blood stages and inhibits the development of cerebral malaria in murine model

Chloroquine (CQ) was the most effective and widely used drug for the prophylaxis and treatment of severe and non-severe malaria. Although its prophylactic use has led to resistance to P. falciparum in all endemic countries, CQ still remains the drug of choice for the treatment of vivax malaria. Otherwise, the speed in which parasite resistance to available antimalarials rises and spreads in endemic regions points to the urgent need for the development of new antimalarials. Quinoline derivatives have been used as a tool in the search for new drugs and were investigated in the present study in an attempt to produce a HIT compound to avoid the cerebral malarial (CM). Seven compounds were synthesized, including three quinoline derivate salts. The cytotoxicity and antiplasmodial activity were assayed in vitro, highlighting compound 3 as a HIT, which also showed interaction with ferriprotoporphyrin IX similarly to CQ. Physicochemical and pharmacokinetic properties of absorption were found to be favorable when analyzed in silico. The in vivo assays, using the experimental cerebral malaria (ECM) model, showed important values of parasite growth inhibition on the 7th day-post infection (Q15 15 mg/kg: 76.9%, Q30 30 mg/kg: 90,1% and Q50 50 mg/kg: 92,9%). Compound 3 also showed significant protection against the development of CM, besides hepatic and renal parameters better than CQ. In conclusion, this quinoline derivative demonstrated promising activity for the treatment of malaria and was able to avoid the development of severe malaria in mice.

Discovery of Highly Potent Fusion Inhibitors with Potential Pan-Coronavirus Activity That Effectively Inhibit Major COVID-19 Variants of Concern (VOCs) in Pseudovirus-Based Assays

We report the discovery of several highly potent small molecules with low-nM potency against severe acute respiratory syndrome coronavirus (SARS-CoV; lowest half-maximal inhibitory concentration (IC₅₀: 13 nM), SARS-CoV-2 (IC₅₀: 23 nM), and Middle East respiratory syndrome coronavirus (MERS-CoV; IC₅₀: 76 nM) in pseudovirus-based assays with excellent selectivity index (SI) values (>5000), demonstrating potential pan-coronavirus inhibitory activities. Some compounds showed 100% inhibition against the cytopathic effects (CPE; IC₁₀₀) of an authentic SARS-CoV-2 (US_WA-1/2020) variant at 1.25 µM. The most active inhibitors also potently inhibited variants of concern (VOCs), including the UK (B.1.1.7) and South African (B.1.351) variants and the Delta variant (B.1.617.2) originally identified in India in pseudovirus-based assay. Surface plasmon resonance (SPR) analysis with one potent inhibitor confirmed that it binds to the prefusion SARS-CoV-2 spike protein trimer. These small-molecule inhibitors prevented virus-mediated cell-cell fusion. The absorption, distribution, metabolism, and excretion (ADME) data for one of the most active inhibitors, NBCoV1, demonstrated drug-like properties. An in vivo pharmacokinetics (PK) study of NBCoV1 in rats demonstrated an excellent half-life (t_1/2) of 11.3 h, a mean resident time (MRT) of 14.2 h, and oral bioavailability. We expect these lead inhibitors to facilitate the further development of preclinical and clinical candidates.

Novel 2-(Diphenylmethylidene) Malonic Acid Derivatives as Anti-HIV Agents: Molecular Modeling, Synthesis and Biological Evaluation

HIV, the virus that causes AIDS (acquired immunodeficiency syndrome), is one of the world's most severe health and development challenges. In this study, a novel series of 2-(diphenyl methylidene) malonic acid derivatives were designed as triple inhibitors of HIV reverse transcriptase, integrase, and protease. Docking models revealed that the target compounds have appropriate affinities to the active sites of the three HIV key enzymes. The synthesized malonic acid analogs were evaluated for their activities against the HIV virus (NL4-3) in HeLa cells cultures. Among them, compound 3 was the most potent anti-HIV agent with 55.20% inhibition at 10 μM and an EC50 of 8.4 μM. Interestingly, all the synthesized compounds do not show significant cytotoxicity at a concentration of 10 μM. As a result, these compounds may serve as worthy hits for the development of novel anti-HIV-agents.

Developing inhaled drugs for respiratory diseases: A medicinal chemistry perspective

Despite the devastating impact of many lung diseases on human health, there is still a significant unmet medical need in respiratory diseases, for which inhaled delivery represents a crucial strategy. More guidance on how to design and carry out multidisciplinary inhaled projects is needed. When designing inhaled drugs, the medicinal chemist must carefully balance the physicochemical properties of the molecule to achieve optimal target engagement in the lung. Although the medicinal chemistry strategy is unique for each project, and will change depending on multiple factors, such as the disease, target, systemic risk, delivery device, and formulation, general guidelines aiding inhaled drug design can be applied and are summarised in this review.

Impact of Matrix Surface Area on Griseofulvin Release from Extrudates Prepared via Nanoextrusion

We aimed to examine the impact of milling of extrudates prepared via nanoextrusion and the resulting matrix surface area of the particles on griseofulvin (GF, a model poorly soluble drug) release during in vitro dissolution. Wet-milled GF nanosuspensions containing a polymer (Sol: Soluplus^®, Kol: Kolliphor^® P407, or HPC: Hydroxypropyl cellulose) and sodium dodecyl sulfate were mixed with additional polymer and dried in an extruder. The extrudates with 2% and 10% GF loading were milled–sieved into three size fractions. XRPD–SEM results show that nanoextrusion produced GF nanocomposites with Kol/HPC and an amorphous solid dispersion (ASD) with Sol. For 8.9 mg GF dose (non-supersaturating condition), the dissolution rate parameter was higher for extrudates with higher external specific surface area and those with 10% drug loading. It exhibited a monotonic increase with surface area of the ASD, whereas its increase tended to saturate above ~30 × 10⁻³ m²/cm³ for the nanocomposites. In general, the nanocomposites released GF faster than the ASD due to greater wettability and faster erosion imparted by Kol/HPC than by Sol. For 100 mg GF dose, the ASD outperformed the nanocomposites due to supersaturation and only 10% GF ASD with 190 × 10⁻³ m²/cm³ surface area achieved immediate release (80% release within 30 min). Hence, this study suggests that ASD extrudates entail fine milling yielding > ~200 × 10⁻³ m²/cm³ for rapid drug release, whereas only a coarse milling yielding ~30 × 10⁻³ m²/cm³ may enable nanocomposites to release low-dose drugs rapidly.

Challenges and opportunities of pharmaceutical cocrystals: a focused review on non-steroidal anti-inflammatory drugs

The focus of the review is to discuss the relevant and essential aspects of pharmaceutical cocrystals in both academia and industry with an emphasis on non-steroidal anti-inflammatory drugs (NSAIDs). Although cocrystals have been prepared for a plethora of drugs, NSAID cocrystals are focused due to their humongous application in different fields of medication such as antipyretic, anti-inflammatory, analgesic, antiplatelet, antitumor, and anti-carcinogenic drugs. The highlights of the review are (a) background of cocrystals and other solid forms of an active pharmaceutical ingredient (API) based on the principles of crystal engineering, (b) why cocrystals are an excellent opportunity in the pharma industry, (c) common methods of preparation of cocrystals from the lab scale to bulk quantity, (d) some latest case studies of NSAIDs which have shown better physicochemical properties for example; mechanical properties (tabletability), hydration, solubility, bioavailability, and permeability, and (e) latest guidelines of the US FDA and EMA opening new opportunities and challenges.

Preparation, Characterization, and Selection of Optimal Forms of (S)-Carvedilol Salts for the Development of Extended-Release Formulation

(S)-carvedilol (S-CAR) is the dominant pharmacodynamic conformation of carvedilol, but its further development for extended-release formulation is restricted by its poor solubility. This study aimed to prepare and screen S-CAR salts that could be used to improve solubility and allow extended release. Five salts of S-CAR with well-known acid counterions (i.e., phosphate, hydrochloride, sulfate, fumarate, and tartrate) were produced using similar processes. However, these salts were obtained with water contents of 1.60-12.28%, and their physicochemical properties differed. The melting points of phosphate, hydrochloride, and tartrate were 1.1-1.5 times higher than that of the free base. The solubility of S-CAR salts was promoted to approximately 3-32 times higher than that of the free base at pH 5.0-8.0. Typical pH-dependent solubilities were evidently observed in S-CAR salts, but considerable differences in solubility properties among these salts were observed. S-CAR phosphate and hydrochloride possessed high melting points, considerable solubility, and excellent chemical and crystallographic stabilities. Accordingly, S-CAR phosphate and hydrochloride were chosen for further pharmacokinetic experiments and pharmaceutical study. S-CAR phosphate and hydrochloride extended-release capsules were prepared using HPMC K15 as the matrix and presented extended release in in vitro and in vivo evaluations. Results implied that water molecules in the hydrated salt were a potential threat to the achievement of crystal stability and thermostability. S-CAR phosphate and hydrochloride are suitable for further development of the extended-release formulation.

Thiophene-2-carboxamide derivatives of anthraquinone: A new potent antitumor chemotype

The anthraquinone scaffold has long been known as a source of efficacious antitumor drugs. In particular, the various chemical modifications of the side chains in this scaffold have yielded the compounds potent for the wild type tumor cells, their counterparts with molecular determinants of altered drug response, as well as in vivo settings. Further exploring the chemotype of anticancer heteroarene-fused anthraquinones, we herein demonstrate that derivative of anthra[2,3-b]thiophene-2-carboxamide, (compound 8) is highly potent against a panel of human tumor cell lines and their drug resistant variants. Treatment with submicromolar or low micromolar concentrations of 8 for only 30 min was sufficient to trigger lethal damage of K562 chronic myelogenous leukemia cells. Compound 8 (2.5 μM, 3-6 h) induced an apoptotic cell death as determined by concomitant activation of caspases 3 and 9, cleavage of poly(ADP-ribose) polymerase, increase of Annexin V/propidium iodide double stained cells, DNA fragmentation (subG1 fraction) and a decrease of mitochondrial membrane potential. Neither a significant interaction with double stranded DNA nor strong inhibition of the DNA dependent enzyme topoisomerase 1 by 8 were detectable in cell free systems. Laser scanning confocal microscopy revealed that some amount of 8 was detectable in mitochondria as early as 5 min after the addition to the cells; exposure for 1 h caused significant morphological changes and clustering of mitochondria. The bioisosteric analog 2 in which the thiophene ring was replaced with furan was less active although the patterns of cytotoxicity of both derivatives were similar. These results point at the specific role of the sulfur atom in the antitumor properties of carboxamide derivatives of heteroarene-fused anthraquinone.

Computational evidence for nitro derivatives of quinoline and quinoline N-oxide as low-cost alternative for the treatment of SARS-CoV-2 infection

A new and more aggressive strain of coronavirus, known as SARS-CoV-2, which is highly contagious, has rapidly spread across the planet within a short period of time. Due to its high transmission rate and the significant time–space between infection and manifestation of symptoms, the WHO recently declared this a pandemic. Because of the exponentially growing number of new cases of both infections and deaths, development of new therapeutic options to help fight this pandemic is urgently needed. The target molecules of this study were the nitro derivatives of quinoline and quinoline N-oxide. Computational design at the DFT level, docking studies, and molecular dynamics methods as a well-reasoned strategy will aid in elucidating the fundamental physicochemical properties and molecular functions of a diversity of compounds, directly accelerating the process of discovering new drugs. In this study, we discovered isomers based on the nitro derivatives of quinoline and quinoline N-oxide, which are biologically active compounds and may be low-cost alternatives for the treatment of infections induced by SARS-CoV-2.

Preparation and characterization of dicarboxylic acids salt of aripiprazole with enhanced physicochemical properties

The focus of present work was to prepare salt of aripiprazole (APZ) with dicarboxylic acids to improve physicochemical properties the drug. Dicarboxylic acids used in the study were malonic acid, maleic acid and succinic acid. The salts were prepared with solubilization-crystallization method. The salts were characterized for pH-solubility, dissolution, and stabilities. The Fourier infrared spectroscopy, X-ray powder diffraction, differential scanning calorimetry and near infrared chemical imaging indicated formation of new solid phase. pH-solubility profiles of the salts were similar to the drug except higher solubility were observed in the salts at all tested pH. The highest solubility was observed for APZ-Malonate salt among all the prepared salts. The solubility curve was inverted 'V' shape for APZ-maleate and APZ-succinate while it was inverted 'U' shape for APZ-malonate. The water solubility of APZ, APZ-malonate, APZ-maleate and APZ-succinate were 0.07 ± 0.02, 3503.9 ± 37.4, 269.3 ± 6.9 and 729.4 ± 9.4 µg/mL, respectively. The dissolution was 2.9 ± 0.4, 18.4 ± 3.9, 19.5 ± 1.4 and 36.6 ± 4.0% in 45 min for APZ, APZ-maleate, APZ-malonate, and APZ-succinate. The stabilities of the salts were similar to the drug. Thus, salts improved the physicochemical properties of the drug, and have similar stability profiles as that of APZ.

Protonation sites and hydrogen bonding in mono-hydrobromide salts of two N,4-diheteroaryl 2-aminothiazoles

The synthesis and structural characterization of N-(6-methoxypyridin-3-yl)-4-(pyridin-2-yl)thiazol-2-amine mono-hydrobromide monohydrate (3) and N-(6-methoxypyridin-3-yl)-4-(pyrazin-2-yl)thiazol-2-amine mono-hydrobromide 0.35 methanol solvate (4) are reported. The crystal structures of 3 (monoclinic, space group P21/n, Z = 4) and 4 (monoclinic, space group, C2/c, Z = 8) feature N,4-diheteroaryl 2-aminothiazoles showing similar molecular conformations but different sites of protonation and thus distinctly different intermolecular hydrogen bonding patterns. In 3, Namine–H⋯Br−, N+pyridine–H⋯Owater, and Owater–H⋯Br− hydrogen bonds link protonated N-(6-methoxypyridin-3-yl)-4-(pyridin-2-yl)thiazol-2-amine and water molecules and bromide anions into a three-dimensional hydrogen-bonded network, whereas intermolecular N+methoxypyridine–H⋯Npyrazine hydrogen bonds result in hydrogen-bonded zigzag chains of protonated N-(6-methoxypyridin-3-yl)-4-(pyrazin-2-yl)thiazol-2-amine molecules in 4.

Docetaxel/dimethyl-β-cyclodextrin inclusion complexes: preparation, in vitro evaluation and physicochemical characterization

Despite the development in novel drug delivery techniques and synthesis of multifunctional excipients, oral delivery of hydrophobic drug like docetaxel (DTX) is still challenging. The present work investigates the inclusion complexation of DTX, and dimethyl-β-cyclodextrin (DM-β-CD) to improve the solubility, dissolution and permeability of the drug. Amongst the native and modified β-cyclodextrins, DM-β-CD showed the highest solubility of DTX. Solid binary inclusion complex (IC) of DTX with DM-β-CD was prepared by solvent evaporation technique and thoroughly characterized for solubility, dissolution, permeability, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (¹H NMR). The aqueous solubility and in vitro dissolution rate of DTX/DM-β-CD IC were markedly increased by 76.04- and 3.55-fold compared to free DTX powder. The permeability of DTX/DM-β-CD IC showed similar absorptive permeability but decreased efflux from the absorbed DTX, compared to pure DTX. Further, physicochemical studies of IC revealed the change of crystalline state DTX to its amorphous form. Moreover, FT-IR and ¹H NMR results indicate the formation of true inclusion complex between DTX and DM-β-CD at 1:1 molar ratio. Collectively, solid inclusion complexes prepared by spray drying method can be an effective strategy to enhance the biopharmaceutical performance of a highly hydrophobic drug DTX.

Synthesis and X-ray crystallographic analysis of free base and hexafluorophosphate salts of 3,4-dihydroisoquinolines from the Bischler–Napieralski reaction

Free base and hexafluorophosphate salts of 3,4-dihydroisoquinolines from the Bischler–Napieralski reaction: potential supramolecular modulation. Centrosymmetric/enantiomorphic crystals.

Hydrogen bonding from crystalline water mediates the hydration/dehydration of mequitazine glycolate

Comparison of crystal structures, dynamic vapor adsorption measurements, lattice energy calculations and structural optimization of the dehydration model were used to evaluate the hydration-dehydration behavior.

Synthesis and Characterization of 5-MeO-DMT Succinate for Clinical Use

To support clinical use, a multigram-scale process has been developed to provide 5-MeO-DMT, a psychedelic natural product found in the parotid gland secretions of the toad, Incilius alvarius. Several synthetic routes were initially explored, and the selected process featured an optimized Fischer indole reaction to 5-MeO-DMT freebase in high-yield, from which the 1:1 succinate salt was produced to provide 136 g of crystalline active pharmaceutical ingredient (API) with 99.86% peak area by high-performance liquid chromatography (HPLC) and a net yield of 49%. The report provides in-process monitoring, validated analytical methods, impurity formation and removal, and solid-state characterization of the API essential for subsequent clinical development.

Prodrugs for Improved Drug Delivery: Lessons Learned from Recently Developed and Marketed Products

Prodrugs are bioreversible, inactive drug derivatives, which have the ability to convert into a parent drug in the body. In the past, prodrugs were used as a last option; however, nowadays, prodrugs are considered already in the early stages of drug development. Optimal prodrug needs to have effective absorption, distribution, metabolism, and elimination (ADME) features to be chemically stable, to be selective towards the particular site in the body, and to have appropriate safety. Traditional prodrug approach aims to improve physicochemical/biopharmaceutical drug properties; modern prodrugs also include cellular and molecular parameters to accomplish desired drug effect and site-specificity. Here, we present recently investigated prodrugs, their pharmaceutical and clinical advantages, and challenges facing the overall prodrug development. Given examples illustrate that prodrugs can accomplish appropriate solubility, increase permeability, provide site-specific targeting (i.e., to organs, tissues, enzymes, or transporters), overcome rapid drug metabolism, decrease toxicity, or provide better patient compliance, all with the aim to provide optimal drug therapy and outcome. Overall, the prodrug approach is a powerful tool to decrease the time/costs of developing new drug entities and improve overall drug therapy.

Combining Surface Templating and Confinement for Controlling Pharmaceutical Crystallization

Poor water solubility is one of the major challenges to the development of oral dosage forms containing active pharmaceutical ingredients (APIs). Polymorphism in APIs leads to crystals with different surface wettabilities and free energies, which can lead to different dissolution properties. Crystal size and habit further contribute to this variability. An important focus in pharmaceutical research has been on controlling the drug form to improve the solubility and thus bioavailability of APIs. In this regard, heterogeneous crystallization on surfaces and crystallization under confinement have become prominent forms of controlling polymorphism and drug crystal size and habits; however there has not been a thorough review into the emerging field of combining these approaches to control crystallization. This tutorial-style review addresses the major advances that have been made in controlling API forms using combined crystallization methods. By designing templates that not only control the surface functionality but also enable confinement of particles within a porous structure, these combined systems have the potential to provide better control over drug polymorph formation and crystal size and habit. This review further provides a perspective on the future of using a combined crystallization approach and suggests that combining surface templating with confinement provides the advantage of both techniques to rationally design systems for API nucleation.

Studies on potential interaction between cinacalcet hydrochloride and diclofenac sodium

Cinacalcet (CT) is an important drug for the treatment hyperparathyroidism. Only few studies havereported thepotential interaction between CT and other potentially coadministered drugs. In this study, the potential of invitro interaction between CT and DF sodium (DF-Na) was investigated. An ion pair salt of CT with DF was obtained by mixing the two compounds in solution; the product was fully characterized by HPLC analysis, UV, FTIR, NMR spectroscopy in addition to DSC. The solubility and partition coefficients were found to significantly decrease and increase, respectively, for the obtained ion pair salt in comparison to the parent compounds. Dissolution studies in phosphate buffer pH 6.8 revealed a significant decrease in the dissolution of an already poorly water soluble drug (decrease to ~20% of the original). Permeation studies, through Caco-2 cells monolayer, revealed a significant decrease in permeation of CT when coexisted with DF (almost to half). Apparent permeability coefficient (Papp) decreased from 3.6 × 10^-6 to 1.8 × 10^-6 cm/s. Interestingly, a structure for the formed CT-DF salt that could explain the above findings (increase in lipophilicity), could be proposed based on structural modelling, molecular dynamic simulations and NMR proton chemical shifts analysis.

Are Myths and Preconceptions Preventing us from Applying Ionic Liquid Forms of Antiviral Medicines to the Current Health Crisis?

At the moment, there are no U.S. Food and Drug Administration (U.S. FDA)-approved drugs for the treatment of COVID-19, although several antiviral drugs are available for repurposing. Many of these drugs suffer from polymorphic transformations with changes in the drug's safety and efficacy; many are poorly soluble, poorly bioavailable drugs. Current tools to reformulate antiviral APIs into safer and more bioavailable forms include pharmaceutical salts and cocrystals, even though it is difficult to classify solid forms into these regulatory-wise mutually exclusive categories. Pure liquid salt forms of APIs, ionic liquids that incorporate APIs into their structures (API-ILs) present all the advantages that salt forms provide from a pharmaceutical standpoint, without being subject to solid-state matter problems. In this perspective article, the myths and the most voiced concerns holding back implementation of API-ILs are examined, and two case studies of API-ILs antivirals (the amphoteric acyclovir and GSK2838232) are presented in detail, with a focus on drug property improvement. We advocate that the industry should consider the advantages of API-ILs which could be the genesis of disruptive innovation and believe that in order for the industry to grow and develop, the industry should be comfortable with a certain element of risk because progress often only comes from trying something different.

Multimodal Role of Amino Acids in Microbial Control and Drug Development

Amino acids are ubiquitous vital biomolecules found in all kinds of living organisms including those in the microbial world. They are utilised as nutrients and control many biological functions in microorganisms such as cell division, cell wall formation, cell growth and metabolism, intermicrobial communication (quorum sensing), and microbial-host interactions. Amino acids in the form of enzymes also play a key role in enabling microbes to resist antimicrobial drugs. Antimicrobial resistance (AMR) and microbial biofilms are posing a great threat to the world's human and animal population and are of prime concern to scientists and medical professionals. Although amino acids play an important role in the development of microbial resistance, they also offer a solution to the very same problem i.e., amino acids have been used to develop antimicrobial peptides as they are highly effective and less prone to microbial resistance. Other important applications of amino acids include their role as anti-biofilm agents, drug excipients, drug solubility enhancers, and drug adjuvants. This review aims to explore the emerging paradigm of amino acids as potential therapeutic moieties.

Topical Drug Delivery Systems Based on Bacterial Nanocellulose: Accelerated Stability Testing

Bacterial nanocellulose (BNC) membranes have enormous potential as systems for topical drug delivery due to their intrinsic biocompatibility and three-dimensional nanoporous structure, which can house all kinds of active pharmaceutical ingredients (APIs). Thus, the present study investigated the long-term storage stability of BNC membranes loaded with both hydrophilic and lipophilic APIs, namely, caffeine, lidocaine, ibuprofen and diclofenac. The storage stability was evaluated under accelerated testing conditions at different temperatures and relative humidity (RH), i.e., 75% RH/40 °C, 60% RH/25 °C and 0% RH/40 °C. All systems were quite stable under these storage conditions with no significant structural and morphological changes or variations in the drug release profile. The only difference observed was in the moisture-uptake, which increased with RH due to the hydrophilic nature of BNC. Furthermore, the caffeine-loaded BNC membrane was selected for in vivo cutaneous compatibility studies, where patches were applied in the volar forearm of twenty volunteers for 24 h. The cutaneous responses were assessed by non-invasive measurements and the tests revealed good compatibility for caffeine-loaded BNC membranes. These results highlight the good storage stability of the API-loaded BNC membranes and their cutaneous compatibility, which confirms the real potential of these dermal delivery systems.

Near infrared fluorogenic probe as a prodrug model for evaluating cargo release by nanoemulsions

We developed Pro-HD, a NIR fluorogenic prodrug model. We evaluated its efficient cell delivery using biocompatible nanoemulsions and its hydrolysis into the fluorescent HD drug model once delivered in cancer cells.

Direct salinization of trelagliptin from solid forms by mechanochemistry and its mechanism of salt formation

The direct salinization of trelagliptin from solid forms by mechanochemistry was developed, which clarified that similar intermolecular interactions and any factor inducing proton transfer have a vital role in the formation of API salts.

Different solid forms for optimizing route of administration of the herpes drug Pritelivir

Pritelivir (AIC316, BAY 57-1293) was discovered as a highly potent drug against herpes simplex viruses with a novel mode of action, i.e. inhibition of the viral helicase-primase. A side by side comparison of the oral form against Valtrex™ in patients with genital herpes, showed superiority in phase II testing for Pritelivir. A number of different solid forms have been generated for additional, e.g. systemic, or topical applications.

Formulation Composition and Process Affect Counterion for CSP7 Peptide

Counterions commonly remain with peptides in salt form after peptide purification. In animal and human studies, acetate counterions are a safer and more acceptable choice for peptides than others (e.g., trifluoroacetate counterions). Various salt forms of caveolin-1 scaffolding domain (CSP7) affect counterion volatilization. The development of lyophilized formulations containing volatile compounds is a challenge because these compounds sublimate away during the process. This work aims to investigate the effect of excipients and lyophilization parameters on the preservation of volatile compounds after lyophilization. The peak areas obtained from ¹H and ¹⁹F NMR spectra were used to calculate the molar ratio of counterions to CSP7. We found that the pH modifier excipient had the greatest impact on the loss of counterions. By optimizing the molar ratio of bulking agent to CSP7, volatile compounds can be preserved after lyophilization. Higher chamber pressure during lyophilization can lower the sublimation rate of volatile compounds. Moreover, the loss of volatile compounds affects the stability of CSP7 due to the pH shift of reconstituted solutions, thereby causing peptide aggregation. The optimization of the formulation and processing helps preserve volatile compounds, thus minimizing the pH change of reconstituted solutions and maintaining the stability of peptide.

Green Accelerated Synthesis, Antimicrobial Activity and Seed Germination Test of Quaternary Ammonium Salts of 1,2-bis(4-pyridyl)ethane

A family of fifteen quaternary ammonium salts (QAs), bearing the 1,2-bis(4-pyridyl)ethane core, were obtained using for the first time two different green methods, such as microwave (MW) and ultrasounds (US) irradiation, with very good yields and in much shorter times compared to the classical method, and an assay on their antimicrobial action against Escherichia coli (E. coli) was carried out. While 12 to 24 hours were required for complete alkylation of 1,2-bis(4-pyridyl)ethane by reactive halogenated derivatives in anhydrous solvent under reflux conditions, MW and US irradiation reduced the reaction time and the desired products were achieved in a few min. One of the aims of this study was to evaluate the antibacterial potential of the synthesized QAs against pathogenic bacteria, along with their impact on germination activity of wheat seeds (Triticum aestivum L.). The antibacterial activity of the QAs against Escherichia coli was explored by determining the minimum inhibitory concentration (MIC). The MIC values varied from 0.312 to 2.5 mg/mL, highlighting the lowest values attained for the derivatives containing methoxy, chlorine and benzofurane functional groups. The viability of aerobic bacteria was determined with the Tetrazolium/Formazan Test, a method that was found to be the best alternative approach with respect to the difuzimetric method. Seeds of Triticum aestivum L. were used for the evaluation of the germination indicators, such as seed germination (SG), the relative seed germination (RSG), the relative radicle growth (RRG), and the seed germination index (GI). The toxicity studies of QAs 1, 4 and 7, at two different concentrations, showed no inhibitory effect on seed germination.

Synthon hierarchy in theobromine cocrystals with hydroxybenzoic acids as coformers

Cocrystals, solids composed of molecular and/or ionic compounds connected by noncovalent interactions, are objects of interest in crystal engineering. Theobromine, as an active pharmaceutical ingredient, was used in cocrystallization with dihydroxybenzoic acids.

Theobromine cocrystals with monohydroxybenzoic acids – synthesis, X-ray structural analysis, solubility and thermal properties

Theobromine, a compound from the purine alkaloid group, is much less soluble in polar solvents than its analogues, i.e. caffeine and theophylline, that is why it was used as an active pharmaceutical ingredient (API) model in cocrystal preparation.