Green-, Red-, and Infrared-Emitting Polymorphs of Sterically Hindered Push-Pull Substituted Stilbenes

The synthesis, XRD single-crystal structure, powder XRD, and solid-state fluorescence of two new DPA-DPS-EWG derivatives (DPA=diphenylamino, DPS=2,5-diphenyl-stilbene, EWG=electron-withdrawing group, that is, carbaldehyde or dicyanovinylene, DCV) are described. Absorption and fluorescence maxima in solvents of various polarity show bathochromic shifts with respect to the parent DPA-stilbene-EWGs. The electronic coupling in dimers and potential twist elasticity of monomers were studied by density functional theory. Both polymorphs of the CHO derivative emit green fluorescence (527 and 550 nm) of moderate intensity (10 % and 5 %) in polycrystalline powder form. Moderate (5 %) red (672 nm) monomer-like emission was also observed for the first polymorph of the DCV derivative, whereas more intense (32 %) infrared (733 nm) emission of the second polymorph was ascribed to the excimer fluorescence.

Highly Photostable and Luminescent Donor-Acceptor Molecules for Ultrasensitive Detection of Sulfur Mustard

Real-time, high signal intensity, and prolonged detection is challenging because of the rarity of fluorophores with both high photostability and luminescence efficiency. In this work, new donor-acceptor (D-A) molecules for overcoming these limitations are reported. A hybridized local and an intramolecular charge-transfer excited state is demonstrated to afford high photoluminescence efficiency of these D-A molecules in solution (≈100%). The twisted molecular structure and bulky alkyl chains effectively suppress π-π and dipole-dipole interactions, enabling high luminescence efficiency of 1 and 2 in the solid state (≈94% and 100%). Furthermore, two D-A aggregates exhibit high photostability as evidenced by 4% and 8% of the fluorescence decreasing after 6 h of continuous irradiation in air, which is in sharp contrast to ≈95% of fluorescence decreasing in a reference compound. Importantly, with these molecules, ultrasensitive detection of sulfur mustard (SM) with a record limit of 10 ppb and selective detection of SM in complex matrices are achieved.

Thermally activated delayed fluorescence exciplex emitters for high-performance organic light-emitting diodes

Owing to their natural thermally activated delayed fluorescence (TADF) characteristics, the development of exciplex emitters for organic light-emitting diodes (OLEDs) has witnessed booming progress in recent years. Formed between electron-donating and electron-accepting molecules, exciplexes with intermolecular charge transfer processes have unique advantages compared with unimolecular TADF materials, offering a new way to develop high-performance TADF emitters. In this review, a comprehensive overview of TADF exciplex emitters is presented with a focus on the relationship between the constituents of exciplexes and their electroluminescence performance. We summarize and discuss the latest and most significant developments of TADF exciplex emitters. Notably, the design principles of efficient TADF exciplex emitters are systematically categorized into three systems within this review. These progressive achievements of TADF exciplex emitters point out future challenges to trigger more research endeavors in this growing field.

Near-Infrared Fluorescent Probes with Rotatable Polyacetylene Chains for the Detection of Amyloid-β Plaques

The plaques of accumulated β-amyloid (Aβ) in the parenchymal brain are accepted as an important biomarker for the early diagnosis of Alzheimer's disease (AD). Many near-infrared (NIR) probes, which were based on the D-π-A structure and bridged by conjugated double bonds, had been reported and displayed a high affinity to Aβ plaques. Considering the isomerization caused by the polyethylene chain, however, the conjugated polyacetylene chain is a better choice for developing new NIR Aβ probes. Hence, in this report, a new series of NIR probes with naphthyl or phenyl rings and different numbers of conjugated triple bonds were designed, synthesized, and evaluated as NIR probes for Aβ plaques. Upon interaction with Aβ aggregates, these probes displayed a significant increase in fluorescence intensity (45- to 360-fold) and a high to moderate affinity (6.05-56.62 nM). Among them, probe 22b displayed excellent fluorescent properties with a 183-fold increase in fluorescence intensity and an emission maximum at 650 nm after incubated with Aβ aggregates. Furthermore, 22b had a high affinity to Aβ aggregates (K_d = 12.96 nM) and could efficiently detect the Aβ plaques in brain sections from both transgenic mice and AD patients in vitro. In summary, this work may lead to a new direction in the development of novel NIR probes for the detection of Aβ plaques.

Intense red emissive organic crystals with elastic bending ability and optical waveguiding behaviour

Orange (Cry-1O) and red (Cry-1R) emissive crystals were obtained based on a green emissive molecule 1. The light transducing capability of Cry-1R in both the straight and bent states can be applied as an active optical waveguiding medium.

Piezochromism of cyanostilbene derivatives: a small structural alteration makes a big photophysical difference

We designed two HLCT-active luminophores with high PLYQs. Under high pressure, DPMO presents better sensitivity and a smaller PL wavelength redshift than TPPA due to the high PLYQs and the strong CT state.

Near-Infrared (>1000 nm) Light-Harvesters: Design, Synthesis and Applications

Organic molecules can absorb or emit light in UV, visible and infra-red (IR) region of solar radiation. Fifty percent of energy of solar radiation lies in the IR region of solar spectrum and extended π-conjugated molecules containing low optical band gap can absorb NIR radiations. Recently IR molecules have grabbed the attention of synthetic chemists. Although only few molecules have been reported so far such as derivative of BODIPY, naphthalimide, porphyrins, perylene, BBT etc., they have shown highest absorbing capacity towards greater than 1100 nm. These compounds have potential applications in different fields, such as for biomedical and optoelectronic applications. In this review, we present different classes of light-harvesters with harvesting range above 1000 nm.

Recent progress in hot exciton materials for organic light-emitting diodes

According to Kasha's rule, high-lying excited states usually have little effect on fluorescence. However, in some molecular systems, the high-lying excited states partly or even mainly contribute to the photophysical properties, especially in the process of harvesting triplet excitons in organic electroluminescent devices. In the current review, we focus on a type of organic light-emitting diode (OLED) materials called "hot exciton" materials, which can effectively harness the non-radiative triplet excitons via reverse intersystem crossing (RISC) from high-lying triplet states to singlet states (T_n→ S_m; n≥ 2, m≥ 1). Since Ma and Yang proposed the hot exciton mechanism for OLED material design in 2012, there have been many reports aiming at the design and synthesis of novel hot exciton luminogens. Herein, we present a comprehensive review of the recent progress in hot exciton materials. The developments of the hot exciton mechanism are reviewed, the fundamental principles regarding molecular design are discussed, and representative reported hot exciton luminogens are summarized and analyzed, along with their structure-property relationships and OLED applications.

Triphenylamine/Tetracyanobutadiene-Based π-Conjugated Push-Pull Molecules End-Capped with Arene Platforms: Synthesis, Photophysics, and Photovoltaic Response

π-Conjugated push-pull molecules based on triphenylamine and 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) have been functionalized with different terminal arene units. In solution, these highly TCBD-twisted systems showed a strong internal charge transfer band in the visible spectrum and no detectable photoluminescence (PL). Photophysical and theoretical investigations revealed very short singlet excited state deactivation time of ≈10 ps resulting from significant conformational changes of the TCBD-arene moiety upon photoexcitation, opening a pathway for non-radiative decay. The PL was recovered in vacuum-processed films or when the molecules were dispersed in a PMMA matrix leading to a significant increase of the excited state deactivation time. As shown by cyclic voltammetry, these molecules can act as electron donors compared to C₆₀ . Hence, vacuum-processed planar heterojunction organic solar cells were fabricated leading to a maximum power conversion efficiency of ca. 1.9 % which decreases with the increase of the arene size.

Dansyl-modified carbon dots with dual-emission for pH sensing, Fe3+ ion detection and fluorescent ink

In this work, a multifunctional ratiometric fluorescence (FL) nanohybrid (CSCDs@DC) was synthesized from chitosan based carbon dots (CSCDs) and dansyl chloride (DC) at room temperature. The CSCDs@DC revealed strong FL intensity, great stability and excellent anti-photobleaching properties. Herein, CSCDs@DC was responsive to pH value in the range of 1.5-4.0 and exhibited color-switchable FL properties between acidic and alkaline environments. In addition, CSCDs@DC showed good selectivity and sensitivity towards Fe³⁺ ions. A good linear relationship for the Fe³⁺ ion detection was obtained in the range from 0 μM to 100 μM, with a detection limit of 1.23 μM. What's more, CSCDs@DC can be used as a fluorescent ink. It expressed superior optical properties after 3 months of storage or continuous exposure to UV light for 24 h. This study suggested that CSCDs@DC had potential in the detection of pH and metal ions, as well as showing promising application in the anti-counterfeiting field.

Phenothiazine versus Phenoxazine: Structural Effects on the Photophysical Properties of NIR-II AIE Fluorophores

Aggregation-induced emission (AIE) fluorophores with second near-infrared window (NIR-II) fluorescence are very promising for in vivo imaging because they emit fluorescence in an aggregated state and provide desirable imaging resolution and depth. Up to now, only a limited number of NIR-II AIE fluorophores have been developed. Therefore, synthesizing novel NIR-II AIE fluorophores and investigating structural effects on their photophysical properties are very important for the development of AIE probes. In this work, we synthesized two donor-acceptor-donor-type NIR fluorophores with emissions extending into the NIR-II window named DPTQ-PhPTZ and DPTQ-PhPXZ with phenothiazine (PTZ) and phenoxazine (PXZ) derivatives as the electron donors, respectively, and studied their photophysical properties via theoretical and experimental approaches as well as the properties in NIR-II in vivo imaging. The PTZ and PXZ moieties provided typical AIE characteristics. Despite the very similar chemical structures of PTZ and PXZ, DPTQ-PhPTZ and DPTQ-PhPXZ exhibited rather different photophysical properties, for example, compared to DPTQ-PhPTZ, DPTQ-PhPXZ had higher quantum yield (QY) both in solution and in the aggregated state and its QY was less sensitive to solvent polarity. After being coated with an amphiphilic copolymer F-127, the fluorophores maintained fluorescence, and the formed fluorescent polymer nanoparticles (NPs) had satisfactory tumor accumulation and biocompatibility, implying that they are applicable for in vivo tumor detection.

Preparation and Photoluminescent Properties of Three 5-Amino Benzothiadiazoles (5-amBTDs)

Three D-A compounds were designed and synthesized based on a benzothiadiazole acceptor. Azepane (AP), iminodubenzyl (IDB) and iminostilbene (ISB) were used, respectively, as donors and installed on the 5-position of BTD to afford 1, 2 and 3, respectively. Their photophysical properties in different states (solution, film, crystal, and powder) are systematically investigated. Among them, AIE-active compounds 2 and 3 were found to have good sensitivity toward viscosity and display quite good linear relationship with an increase in viscosity. Compound 2 displayed dual emission in solutions which largely depended on the polarity of the solvent. Meanwhile, compound 2 exhibits a mechanochromic character with disappearance and reappearance of a dual-emissive peak induced by mechanical grinding and solvent fuming. Furthermore, these three compounds can be used in the fabrication of blue OLED devices.

Scanning Ultrafast Spectral Dynamics of Triphenylamine-Modified Vinylbenzothiazole Derivative: Role of Solvent Polarity and Temperature

The photophysical properties of a donor-acceptor compound based on triphenylamine-modified vinylbenzothiazole derivative (BTTM) are investigated by multispectral techniques. Based on the pump-probe and pump-dump/push-probe technique, it is found that the hybridized localized excited (LE) and charge transfer (CT) state (HLCT) participates in the relaxation process of excited BTTM. The excited state is the LE-dominated HLCT state in cyclohexane; then it evolves to the CT-dominated HLCT state in a high polarity solvent. Meanwhile, a new intermediate state named the HLCT' state also exists in a high polar solvent. When the temperature of BTTM film drops, the increasing photoluminescence (PL) lifetime and PL quantum yield are assigned to the nonradiative recombination inactivation. The pump-probe data show that exciton-exciton annihilation originating from exciton collision gradually increases owing to the weakening of phonon-exciton scattering at low temperature. Our results provide comprehensive insight into the optoelectronic properties of organic molecules.

Host-Free Deep-Blue Organic Light-Emitting Transistors Based on a Novel Fluorescent Emitter

Organic light-emitting transistors (OLETs), with the capability of simultaneously functioning as a light-emitting stack and a thin-film transistor, have received considerable attention for potential applications in active-matrix flat-panel displays. Here, we demonstrate host-free deep-blue OLETs based on a novel small-molecule fluorescent emitter, 10,10'-bis(4-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)-10H,10'H-9,9'-spirobi[acridine] (SPA-PBI), and a high-k dielectric, cross-linked poly(vinyl alcohol) (PVA) polymer. The deep-blue OLETs based on 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) as an electron-transport layer showed an extraordinarily high hole mobility of 4.6 cm² V^-1 s^-1, a brightness of 570 cd m^-2 under a low gate and source-drain voltages of -24 V, and an external quantum efficiency (EQE) of 0.87% at 100 cd m^-2. Besides, an electroluminescence peak was observed to be at 432 nm and the corresponding CIE coordinates were as deep as (0.16, 0.08). By replacing TPBi with TmPyPB as the electron-transport layer (ETL), the electron transport and hole blocking capability were greatly improved, which led to ∼60% enhancement of the EQE (1.39% at 100 cd m^-2). These results suggest that using a highly twisted double-donor-acceptor emitter with rationally optimized charge injection could lead to highly efficient deep-blue OLETs.

A Simple and Strong Electron-Deficient 5,6-Dicyano[2,1,3]benzothiadiazole-Cored Donor-Acceptor-Donor Compound for Efficient Near Infrared Thermally Activated Delayed Fluorescence

Despite the success of thermally activated delayed fluorescent (TADF) materials in steering the next generation of organic light-emitting diodes (OLEDs), effective near infrared (NIR) TADF emitters are still very rare. Here, we present a simple and extremely high electron-deficient compound, 5,6-dicyano[2,1,3]benzothiadiazole (CNBz), as a strong electron-accepting unit to develop a sufficiently strong donor-acceptor (D-A) interaction for NIR emission. End-capping with the electron-donating triphenylamine (TPA) unit created an effective D-A-D type system, giving rise to an efficient NIR TADF emissive molecule (λ_em =750 nm) with a very small ΔE_ST of 0.06 eV. The electroluminescent device using this NIR TADF emitter exhibited an excellent performance with a high maximum radiance of 10020 mW Sr^-1  m^-2 , a maximum EQE of 6.57% and a peak wavelength of 712 nm.

Organic polymorphs based on an AEE-active tetraphenylethene salicylaldehyde Schiff-base derivative: the effect of molecular conformation on luminescence properties

An aggregation-enhanced emission (AEE)-active tetraphenylethene salicylaldehyde Schiff-base derivative, TPE-Nap, was prepared using a facile synthesis. The AEE property of TPE-Nap was studied by luminescence and absorption spectra, and was attributed to the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N isomerization restriction and the excited-state intramolecular proton transfer (ESIPT) process. Polymorphs TPE-Nap-Y and TPE-Nap-O were prepared from TPE-Nap, and their emission color and intensity were compared. TPE-Nap-Y is a yellow block crystal with a very weak yellow emission, with its main peak at 565 nm, while TPE-Nap-O is an orange plate crystal that gave a stronger orange emission, with its main peak at 583 nm. Single crystal diffraction data were used to demonstrate the structure–property relationship. The most unique feature was that the torsion angle of TPE-Nap-Y between the benzene ring of the TPE unit and the Nap unit was 54.08°, while that of TPE-Nap-O was 14.19°. Interestingly, the TPE unit assumed propeller-like nonplanar conformations that likely led to different intermolecular interactions, such as C–H⋯O interactions (2.529 Å and 2.617 Å) in TPE-Nap-O and C–H⋯π interactions (3.224 Å and 3.791 Å) in TPE-Nap-Y. These were influenced by the torsion angle, although the molecules in both crystals were arranged in a similar end-to-end slip-stacking mode. These results inferred that the molecular conformation was evidently affected by luminescent properties. Crystals possessing a slightly twisted molecular conformation exhibited stronger emission than those possessing a heavily twisted molecular conformation. These investigations will expand the research on the relationship between the molecular conformation and the emission properties of organic solids, and might provide a new development strategy for organic polymorphs.

Organic polymorphs displaying different emission colors and intensities were obtained from aggregation-enhanced emission (AEE)-active tetraphenylethene derivatives, and their luminescent properties were affected mainly by molecular conformation.

Rhodanine-based Knoevenagel reaction and ring-opening polymerization for efficiently constructing multicyclic polymers

Cyclic polymers have a number of unique physical properties compared with those of their linear counterparts. However, the methods for the synthesis of cyclic polymers are very limited, and some multicyclic polymers are still not accessible now. Here, we found that the five-membered cyclic structure and electron withdrawing groups make methylene in rhodanine highly active to aldehyde via highly efficient Knoevenagel reaction. Also, rhodanine can act as an initiator for anionic ring-opening polymerization of thiirane to produce cyclic polythioethers. Therefore, rhodanine can serve as both an initiator for ring-opening polymerization and a monomer in Knoevenagel polymerization. Via rhodanine-based Knoevenagel reaction, we can easily incorporate rhodanine moieties in the backbone, side chain, branched chain, etc, and correspondingly could produce cyclic structures in the backbone, side chain, branched chain, etc, via rhodanine-based anionic ring-opening polymerization. This rhodanine chemistry would provide easy access to a wide variety of complex multicyclic polymers.

High-performance Nonvolatile Organic Photoelectronic Transistor Memory Based on Bulk Heterojunction Structure

Depending on the storage mechanisms, organic field-effect transistor (OFET) memory is usually divided into floating gate memory, ferroelectric memory, and polymer-electret-based memory. In this work, a new type of nonvolatile OFET memory is proposed by simply blending a p-type semiconductor and a n-type semiconductor without using an extra trapping layer. The results show that the memory window can be effectively modulated by the dopant concentration of the n-type semiconductor. With the addition of a 5% n-type semiconductor, blending devices exhibit a large memory window up to 57.7 V, an ON/OFF current ratio (I_ON/I_OFF) ≈ 10⁵, and a charge retention time of over 10 years, which is comparable or even better than those of most of the traditional OFET memories. The discontinuous n-type semiconductor is set as a charge-trapping center for charge storage due to the quantum well-like organic heterojunctions. The generalization of this method is also investigated in other organic systems. Moreover, the blend devices are also applied to optical memory and show multilevel optical storage, which are further scaled up to 8 × 8 array to map up two-dimensional (2D) optical images with long-term retention and reprogramming characteristic. The results reveal that the novel system design has great potential application in the field of digital image memory and photoelectronic system.

Fluorescent Properties of Morin in Aqueous Solution: A Conversion from Aggregation Causing Quenching (ACQ) to Aggregation Induced Emission Enhancement (AIEE) by Polyethyleneimine Assembly

Unlike normal conversion from aggregation caused quenching (ACQ) to aggregation induced emission enhancement (AIEE) by introducing aromatic rotors tuning aggregation modes, in this study, it is achieved through a supramolecular assembly with polymer. Thus, it provides an easy approach for the inhibition of unwanted H-aggregation between luminogens. As a kind of flavonoid, morin has shown great potential in therapeutics. However, its poor solubility and weak emission in aqueous solution greatly limit its bioapplications. When morin is dissolved in aqueous solution, the presence of 30 × 10^-6 m polyethyleneimine (PEI) induces significant emission enhancement and bathochromic shift. Consequently, the quantum yield (QY) of 24.5% is either achieved by assembling with PEI, versus 0.76% of its ACQ state composed of H-aggregation in aqueous solution. Particularly, the in-depth mechanism studies reveal that it is the assembly with PEI that disassociates the H-aggregation in aqueous solution and further restricts the stretching and/or rotation of morin, which eventually reduce the nonradiative decays and enhance the emission. Therefore, the present study reports a unique phenomenon of AIEE effects on morin. Particularly the in-depth investigation on intrinsic mechanisms will highlight and greatly expand the development of more luminogens from traditional Chinese herbals.

Deep-red fluorescence from isolated dimers: a highly bright excimer and imaging in vivo

Restricted by the energy-gap law, the development of bright near-infrared (near-IR) fluorescent luminophors in the solid state remains a challenge. Herein, we report a new design strategy for realizing high brightness and deep-red/near-IR-emissive organic molecules based on the incorporation of a hybridized local and charge-transfer (HLCT) state and separated dimeric stacks into one aggregate. Experimental and theoretical analyses show that this combination not only contributes to high photoluminescent quantum yields (PLQYs) but also significantly lessens the energy gap. The fluorophore BTA-TPA exhibits excellent fluorescence performance, achieving a PLQY of 54.8% for the fluorescence peak at 690 nm, which is among the highest reported for near-IR fluorescent excimers. In addition, because of its bioimaging performance, the designed luminophor has potential for use as a deep-red fluorescent probe for biomedical applications. This research opens the door for developing deep-red/near-IR emissive materials with high PLQYs.

Second Near-Infrared Aggregation-Induced Emission Fluorophores with Phenothiazine Derivatives as the Donor and 6,7-Diphenyl-[1,2,5]Thiadiazolo[3,4-g]Quinoxaline as the Acceptor for In Vivo Imaging

Traditional organic fluorophores generally have hydrophobic conjugated backbones and exhibit an aggregation-caused quenching emission property, which limits greatly their applications in the biological field. Aggregation-induced emission (AIE) fluorophores can breakthrough this shortcoming and are more promising in biological imaging. In this paper, we synthesized three novel donor-acceptor-donor-type second near-infrared (NIR-II) fluorophores and studied their geometric and electronic structures and photophysical properties by both theoretical and experimental studies. All the three fluorophores had typical AIE characteristics, and their emission wavelength spanned the traditional near-infrared and NIR-II regions. They exhibited much stronger fluorescence after being encapsulated in polymer nanoparticles (NPs) than in solutions, and the fluorophore-loaded NPs had desirable biosafety and significant tumor accumulation, indicating that they have great application potentials in tumor detection.

Pyrene[4,5-d]imidazole-Based Derivatives with Hybridized Local and Charge-Transfer State for Highly Efficient Blue and White Organic Light-Emitting Diodes with Low Efficiency Roll-Off

A family of pyrene[4,5-d]imidazole derivatives, PyPA, PyPPA, PyPPAC, and PyPAC, with different excited states are successfully developed. Among them, PyPPA and PyPPAC possess hybridized local and charge-transfer (HLCT) state, endowing them with pure blue fluorescence as well as high quantum yields. The nondoped organic light-emitting diode (OLED) based on PyPPA displays Commission Internationale de L'Eclairage coordinates of (0.14, 0.13) and achieves a maximum external quantum efficiency (EQE) of 8.47%, which are among the highest value reported to date for nondoped blue HLCT OLEDs. The nondoped OLED based on PyPPAC exhibits a maximum luminance of 50,046 cd m^-2 located in the blue region with CIE coordinates of (0.15, 0.21) and an EQE of 6.74% even when the luminance reached over 10,000 cd m^-2. In addition, they both reveal ultimate exciton utilizing efficiencies of nearly 100%. The potential of a blue emitter of PyPPA with an HLCT character for application in white OLED (WOLED) is further tested. The efficient two-color hybrid warm WOLED is successfully achieved, which provides the total EQE, power efficiency, and current efficiency of up to 21.19%, 61.46 lm W^-1, and 62.13 cd A^-1, respectively. The nondoped blue OLEDs and hybrid WOLEDs present good color stabilities with low efficiency roll-offs. Our results prove that taking advantage of the HLCT state, nondoped blue OLEDs as well as hybrid WOLEDs with high performance could be realized, which have a promising prospect for the displays and lightings in the future.

A highly emissive AIE-active luminophore exhibiting deep-red to near-infrared piezochromism and high-quality lasing

Further development of high-efficiency and low-cost organic fluorescent materials is intrinsically hampered by the energy gap law and spin statistics, especially in the near-infrared (NIR) region. Here we design a novel building block with aggregation-induced emission (AIE) activity for realizing highly efficient luminophores covering the deep-red and NIR region, which originates from an increase in the orbital overlap and electron-withdrawing ability. An organic donor-acceptor molecule (BPMT) with the building block is prepared and can readily form J-type molecular columns with multiple C-H⋯N/O interactions. Notably, such synthesized materials can emit fluorescence centered at 701 nm with extremely high photoluminescence quantum yields (PLQYs) of 48.7%. Experimental and theoretical investigations reveal that the formation of the hybridized local and charge-transfer (HLCT) state and substantial C-H⋯N/O interactions contribute to a fast radiative decay rate and a slow nonradiative decay rate, respectively, resulting in high PLQYs in the solid state covering the NIR range. Remarkably, such BPMT crystals, as a first example, reveal strong-penetrability piezochromism along with a distinct PL change from the deep-red (λ max = 704 nm) to NIR (λ max = 821 nm) region. Moreover, such typical AIE-active luminophores are demonstrated to be a good candidate as a lasing medium. Together with epoxy resin by a self-assembly method, a microlaser is successfully illustrated with a lasing wavelength of 735.2 nm at a threshold of 22.3 kW cm-2. These results provide a promising approach to extend the contents of deep-red/NIR luminophores and open a new avenue to enable applications ranging from chemical sensing to lasing.

A Novel DR/NIR T-Shaped AIEgen: Synthesis and X-Ray Crystal Structure Study

We developed a new benzodifuran derivative as the condensation product between 2,6-diamino-4-(4-nitrophenyl)benzo[1,2-b:4,5-b’]difuran-3,7-dicarboxylate and 3-hydroxy-2-naphthaldehyde. The intramolecular hydrogen-bond interactions in the terminal half-salen moieties produce a sterically encumbered highly conjugated main plane and a D-A-D (donor-acceptor-donor) T-shaped structure. The novel AIEgen (aggregation-induced enhanced emission generator) fulfils the requirement of RIR (restriction of intramolecular rotation) molecules. DR/NIR (deep red/near infrared) emission was recorded in solution and in the solid state, with a noteworthy photoluminescence quantum yield recorded on the neat crystals which undergo some mechanochromism. The crystal structure study of the probe from data collected at a synchrotron X-ray source shows a main aromatic plane π-stacked in a columnar arrangement.

Narrowband and Pure Violet Organic Emitter with a Full Width at Half Maximum of 14 nm and y Color Coordinate of Below 0.02

Violet organic light-emitting diodes (OLEDs) with a very narrow emission spectrum with a full width at half maximum of 14 nm and y color coordinate of 0.02 are developed using a indolo[3,2,1-jk]carbazole-derived pure violet emitter. The violet emitter, 2,5,13,16-tetra-tert-butylindolo[3,2,1-jk]-indolo[1',2',3':1,7]indolo[2,3-b]carbazole (tDIDCz), is designed to have a very rigid molecular structure driven by the multiresonance-type core structure through the alternating carbon and nitrogen atoms. The violet emitter is decorated with t-butyl groups to prevent intermolecular aggregation and packing, which allow pure violet emission without excimer emission. The violet OLEDs derived from the tDIDCz emitter show a violet color coordinate of (0.164, 0.018) with a narrow emission spectrum and a full width at half maximum of 14 nm (105 meV). The external quantum efficiency of the pure violet OLEDs is 3.3%. This is the first work reporting pure violet emission without any ultraviolet emission below 380 nm and blue emission above 450 nm by showing a very narrow emission spectrum.

Realizing Efficient Single Organic Molecular White Light-Emitting Diodes from Conformational Isomerization of Quinazoline-Based Emitters

Single pure organic molecular white light emitters (SPOMWLEs) are of significance as a new class of material for white lighting applications; however, few of them are able to emit white electroluminescence from organic light-emitting diodes. Herein, donor-π-acceptor conjugated emitters, 2PQ-PTZ and 4PQ-PTZ, were designed and synthesized as SPOMWLEs for white light emission considering the distinct advantages of their conformation isomers. The coexistence of conformational isomers in 2PQ-PTZ, which is the first experimental evidence of the coexisting quasi-axial and quasi-equatorial conformers, provides ideal flexibility to obtain white light emission from their simultaneous and well-separated fluorescence and thermally activated delayed fluorescence. With these remarkable properties, a 2PQ-PTZ-based white light-emitting diode (LED) with a CIE of (0.32, 0.34) and color rendering index (CRI) of 89 is demonstrated. Further, the white organic light-emitting diode (OLED) of 2PQ-PTZ exhibits a high external quantum efficiency (EQE) of 10.1%, which is the reported highest performance among SPOMWLE-based OLEDs.

Utilizing Electroplex Emission to Achieve External Quantum Efficiency up to 18.1% in Nondoped Blue OLED

For the first time, electroplex emission is utilized to enhance the performance of nondoped blue organic light-emitting diodes (OLEDs). By decorating the twisted blue-emitting platform and adjusting the electronic structure, three molecules of 3Cz-Ph-CN, 3Cz-mPh-CN, and 3Ph-Cz-CN with a donor-acceptor structure are synthesized and investigated. When external voltage is applied, electroplex emission, which contributes to the emission performance of OLED, can be realized at the interface between the emitting layer and the electron-transporting layer. Accordingly, high external quantum efficiency of 18.1% can be achieved, while the emission wavelength of the device can be controlled in the blue region. Our results provide the possibility to enhance the performance of OLED through electroplex emission, in addition to the generally investigated thermally activated delayed fluorescence (TADF). Excitedly, when 3Ph-Cz-CN is used as host material in orange-emitting phosphorous OLEDs (PO-01 as the dopant), unprecedented high external quantum efficiency of 27.4% can also be achieved.

Catalytic Annulation of Alkynyl 1,2-Diketone Leading to Hydroxy Spirocyclopenteneindenedione: An Organic Dye with Strong Crystallization-Induced Emission and Data Storage Application

An unprecedented cascade annulation between alkynyl 1,2-diketones and indene-1,3-diones is achieved for the first time, leading to a series of propeller-like large conjugated compounds in ≤99% yield. The products show strong crystallization-induced emission, with the colors changing from green to red. The fluorescence of the dye can be switched on and off by external acid/alkali stimuli, which can be utilized to develop a practical technology for rewritable information storage and security ink.

Efficient fluorescent OLEDS based on assistant acceptor modulated HLCT emissive state for enhancing singlet exciton utilization

Phenylamine phenanthroimidazole based bipolar compounds with donor-acceptor (D-A) architecture namely, 4-(1-(2,3-dihydrobenzo[b][1,4]dioxin-5-yl)-6,9-di(pyren-4-yl)-1H-phenanthro[9,10-d]imidazol-2-yl)-N,N-diphenylaniline (DDPPPA) and 4'-(1-(2,3-dihydrobenzo[b][1,4]dioxin-5-yl)-6,9-di(pyren-4-yl)-1H-phenanthro[9,10-d]imidazol-2-yl)-N,N-diphenyl-[1,1'-biphenyl]-4-amine (DDPBA) have been synthesized with highly fluorescent pyrene moieties at C6- and C9-positions. The C6 and C9 modification enhanced the thermal, photochemical and electroluminescent properties. Both molecules were employed as blue emitters in non doped organic light emitting devices (OLEDs) and show high performances due to hybridized local and charge-transfer properties. An OLED with DDPPPA/DDPBA emissive layer shows deep-blue emission with maximum external quantum efficiency (η ex), current efficiency (η c) and power efficiency (η p) of 5.7/6.0%, 10.5/12.0 cd A-1 and 8.3/9.2 lm W-1, respectively. Both devices show high singlet exciton utilizing efficiency (η s) of DDPPPA-31.33% and DDPBA-35.29%. The doped device m-MTDATA:DDPPPA/m-MTDATA:DDPBA shows maximum efficiencies of η c -7.4/8.23 cd A-1; η p -5.8/6.13 lm W-1; η ex -4.72/5.63% (5 wt%):η c -8.36/9.15 cd A-1; η p -6.32/6.65 lm W-1; η ex -4.86/5.45% (10 wt%):η c -9.58/10.02 cd A-1; η p -7.8/8.25 lm W-1; η ex -5.96/6.25% (20 wt%). The doped device based on TAPC host TAPC:DDPPPA/TAPC:DDPBA exhibits maximum efficiencies of η c -9.60/10.03 cd A-1; η p -7.81/8.26 lm W-1; η ex -5.96/6.25% (20 wt%).

Pressure-Induced Blue-Shifted and Enhanced Emission: A Cooperative Effect between Aggregation-Induced Emission and Energy-Transfer Suppression

Most organic piezochromic materials exhibit red-shifted and quenched emission as pressure increases. However, an abnormal phenomenon of pressure-induced blue-shifted and enhanced emission is observed in a 9-(3-(1,2,2-triphenylvinyl)phenyl)anthracene crystal, which is based on discrete π-π anthracene (AN) dimers stacking with tetraphenylethylene (TPE) as spacer. A blue-shifted emission appears and strengthens when the pressure is more than 1.23 GPa, and it reaches the maximum when the pressure is 4.28 GPa. This phenomenon is ascribed to the cooperative effect between the aggregation-induced emission of TPE units and energy-transfer suppression from TPE to an AN excimer. This work reports a new concept in the piezochromic field and provides a novel strategy to achieve luminescence from a high-lying excited state.

Multicolored fluorescence variation of a new carbazole-based AIEE molecule by external stimuli

In this article, we design and synthesize a new carbazole-based molecule, Cz2CN, with a twisted D-A structure, using the carbazole group as the donor and a dicyanoethylene fragment as the acceptor. Such a twisted D-A structure endows Cz2CN with two characteristic emission bands, LE emission and ICT emission. Cz2CN exhibits AIEE, solvatochromism, and different responses to anisotropic shearing force and isotropic hydrostatic pressure, due to the sensitivity of ICT emission to aggregation, solvent polarity and mechanical force. Aggregation benefits the ICT emission, leading to the AIEE of Cz2CN in the THF/water system. Polar solvents can help stabilize the ICT-excited states and make the ICT emission red shift. The original crystalline powder is strongly fluorescent with a high quantum yield of 40.4%. A single crystal of Cz2CN is obtained and dimers without π-π interactions among carbazole groups contribute to the strong emission. Anisotropic shearing alters the emission of Cz2CN powder from sky blue (474 nm) to green (520 nm). The single crystal of Cz2CN undergoes a distinct multicolored variation from sky blue (476 nm) to green (510 nm) and further to orange (590 nm) upon isotropic hydrostatic pressure. The emission of the original powder/crystal of Cz2CN is dominated by LE (locally excited state) emission in HLCT (intercrossed hybridized local and charge transfer excited state). To the best of our knowledge, Cz2CN is an interesting carbazole-based molecule that shows simultaneous AIEE, solvatochromism and force-induced multicolored variation.

The design, synthesis and performance of thermally activated delayed fluorescence macromolecules

The design, synthesis and performance of thermally activated delayed fluorescence macromolecules are summarized, and the typical solution-processed polymeric and dendritic emitters are also organized herein as a function of EL emission color.

ESIPT-active multi-color aggregation-induced emission features of triphenylamine–salicylaldehyde-based unsymmetrical azine family

A new family of ESIPT and AIE-active triphenylamine-appended unsymmetrical azine derivatives is reported.

Approaches for Long Lifetime Organic Light Emitting Diodes

Organic light emitting diodes (OLEDs) have been well known for their potential usage in the lighting and display industry. The device efficiency and lifetime have improved considerably in the last three decades. However, for commercial applications, operational lifetime still lies as one of the looming challenges. In this review paper, an in-depth description of the various factors which affect OLED lifetime, and the related solutions is attempted to be consolidated. Notably, all the known intrinsic and extrinsic degradation phenomena and failure mechanisms, which include the presence of dark spot, high heat during device operation, substrate fracture, downgrading luminance, moisture attack, oxidation, corrosion, electron induced migrations, photochemical degradation, electrochemical degradation, electric breakdown, thermomechanical failures, thermal breakdown/degradation, and presence of impurities within the materials and evaporator chamber are reviewed. Light is also shed on the materials and device structures which are developed in order to obtain along with developed materials and device structures to obtain stable devices. It is believed that the theme of this report, summarizing the knowledge of mechanisms allied with OLED degradation, would be contributory in developing better-quality OLED materials and, accordingly, longer lifespan devices.

Highly Efficient Deep-Blue Electroluminescence Based on a Solution-Processable A-π-D-π-A Oligo(p-phenyleneethynylene) Small Molecule

The development of solution-processable fluorescent small molecules with highly efficient deep-blue electroluminescence is of growing interest for organic light-emitting diode (OLED) applications. However, high-performance deep-blue fluorescent emitters with external quantum efficiencies (EQEs) over 5% are still scarce in OLEDs. Herein, a novel highly soluble oligo(p-phenyleneethynylene)-based small molecule, 1,4-bis((2-cyanophenyl)ethynyl)-2,5-bis(2-ethylhexyloxy)benzene (2EHO-CNPE), is designed, synthesized, and fully characterized as a wide band gap (2.98 eV) and highly fluorescent (Φ_PL = 0.90 (solution) and 0.51 (solid-state)) deep-blue emitter. The new molecule is functionalized with cyano (-CN)/2-ethylhexyloxy (-OCH₂CH(C₂H₅)C₄H₉) electron-withdrawing/-donating substituents, and ethynylene is used as a π-spacer to form an acceptor (A)-π-donor (D)-π-acceptor (A) molecular architecture with hybridized local and charge transfer (HLCT) excited states. Physicochemical and optoelectronic characterizations of the new emitter were performed in detail, and the single-crystal structure was determined. The new molecule adopts a nearly coplanar π-conjugated framework packed via intermolecular "C-H···π" and "C-H···N" hydrogen bonding interactions without any π-π stacking. The OLED device based on 2EHO-CNPE shows an EQE_max of 7.06% (EQE = 6.30% at 200 cd/m²) and a maximum current efficiency (CE_max) of 5.91 cd/A (CE = 5.34 cd/A at 200 cd/m²) with a deep-blue emission at CIE of (0.15, 0.09). The electroluminescence performances achieved here are among the highest reported to date for a solution-processed deep-blue fluorescent small molecule, and, to the best of our knowledge, it is the first time that a deep-blue OLED is reported based on the oligo(p-phenyleneethynylene) π-framework. TDDFT calculations point to facile reverse intersystem crossing (RISC) processes in 2EHO-CNPE from high-lying triplet states to the first singlet excited state (T₂/T₃ → S₁) (hot-exciton channels) that enable a high radiative exciton yield (η_r ∼ 69%) breaking the theoretical limit of 25% in conventional fluorescent OLEDs. These results demonstrate that properly designed fluorescent oligo(p-phenyleneethynylenes) can be a key player in high-performance deep-blue OLEDs.

Restriction of Flip-flop Motion as a Mechanism for Aggregation-Induced Emission

Although the restriction of intramolecular motion (RIM) has been accepted as a general working mechanism for the aggregation-induced emission (AIE) phenomenon, some new mechanisms, such as suppression of Kasha's rule (SOKR), has also been proposed to explain the AIE of boron difluorohydrazone (BODIHY) derivatives. However, the understanding of the relation and difference between RIM and SOKR mechanisms is limited. To address this issue, we performed a theoretical study on the excited state decay of a series of BODIHY derivatives. Surprisingly, we found that the first excited state of BODIHY derivatives is a bright state and contradicts with the SOKR mechanism. Importantly, we proposed a new mechanism, termed as restriction of flip-flop motion, to explain the AIE of BODIHY derivatives. This mechanism involves the formation of an umbrella-like minimal energy conical intersection through flip-flop motion, which is easily accessible in low-viscosity solvents and will be restricted in high-viscosity solvents.

Fine Modulation of the Higher-Order Excitonic States toward More Efficient Conversion from Upper-Level Triplet to Singlet

Hot exciton luminogens capable of harvesting nonemissive triplet excitons via reverse intersystem crossing from high-order triplet (hRISC) to singlet have great potential in high-efficiency fluorescent organic light-emitting diodes (OLEDs). Although spin-orbit coupling (SOC) is regarded as a key factor affecting the RISC process, its effects on hot exciton materials are poorly understood. Herein, we design and synthesize two blue-emitting hot exciton luminogens, PABP and PAIDO, to study this issue by modulating the excited-state properties. Theoretical and experimental research contributions demonstrate that a stronger SOC between energetically close S₁ (π-π*) and T_n (T₃, n-π*) of PAIDO gives rise to faster and more efficient hRISC in comparison to that of PABP, leading to a higher external quantum efficiency and a higher exciton utilization efficiency. Crucially, the experimentally measured hRISC rate (k_hRISC) of hot exciton materials is on the order of 10⁷ s^-1, which is much faster than that of the thermally activated delayed fluorescence materials.