Constructing an Acidic Microenvironment by MoS2 in Heterogeneous Fenton Reaction for Pollutant Control

Directing Charge Transfer in a Chemical-Bonded BaTiO3 @ReS2 Schottky Heterojunction for Piezoelectric Enhanced Photocatalysis

The piezo-assisted photocatalysis system, which can utilize solar energy and mechanical energy simulteneously, is promising but still challenging in the environmental remediation field. In this work, a novel metal-semiconductor BaTiO₃ @ReS₂ Schottky heterostructure is designed and it shows high-efficiency on piezo-assisted photocatalytic molecular oxygen activation. By combining experiment and calculation results, the distorted metal-phase ReS₂ nanosheets are found to be closely anchored on the surface of the BaTiO₃ nanorods, through interfacial ReO covalent bonds. The Schottky heterostructure not only forms electron-transfer channels but also exhibits enhanced oxygen activation capacity, which are helpful to produce more superoxide radicals. The polarization field induced by the piezoelectric BaTiO₃ can lower the Schottky barrier and thus reduce the transfer resistance of photogenerated electrons directing to the ReS₂ . As a result of the synergy effect between the two components, the BaTiO₃ @ReS₂ exhibits untrahigh activity for degradation of pollutants with an apparent rate constant of 0.133 min^-1 for piezo-assisted photocatalysis, which is 16.6 and 2.44 times as that of piezocatalysis and photocatalysis, respectively. This performance is higher than most reported BaTiO₃ -based piezo-assisted photocatalysis systems. This work paves the way for the design of high-efficiency piezo-assisted photocatalytic materials for environmental remediation through using green energies in nature.

Analysis of the degradation of m-cresol with Fe/AC in catalytic wet peroxide oxidation enhanced by swirl flow

Catalytic wet peroxide oxidation (CWPO) enhanced by swirl flow (SF-CWPO) was developed for the first time to explore the degradation of m-cresol in 3%iron/activated carbon catalysed Fenton reaction. Under the conditions of catalyst dosage of 0.6 g/L, H₂O₂ dosage of 1.5 mL/L, pH = 6 and reaction time of 20 min, the degradation rate of m-cresol and total organic carbon in 100 mg/L m-cresol solution reaches 81.5% and 82%, respectively. The reaction speed in the SF-CWPO system with an independently designed cyclone reactor was two times faster than the traditional CWPO systems. In addition, via liquid chromatography-mass spectrometry analysis of the degradation product, the possible degradation pathway for m-cresol was proposed. The proposed SF-CWPO can potentially be an efficient and economical method to treat organic pollutants in wastewaters.

Cu/Fe oxide integrated on graphite felt for degradation of sulfamethoxazole in the heterogeneous electro-Fenton process under near-neutral conditions

In the heterogeneous electro-Fenton (EF) system, high-efficiency and durable materials have attracted widespread attention as cathodes for degradation of refractory organic pollutants. In this study, a stable Cu/Fe oxide modified graphite felt electrode (Cu_0.33Fe_0.67NBDC-300/GF) was fabricated via a one-step hydrothermal method and subsequent thermal treatment, which used a bimetallic metal-organic framework (MOF) with 2-aminoterephthalic acid (NH₂BDC) ligand as the precursor. The Cu_0.33Fe_0.67NBDC-300/GF electrode was used as the cathode for sulfamethoxazole (SMX) degradation in the heterogeneous EF process. The coexistence of the Fe^II/Fe^III and Cu^I/Cu^II redox couples significantly accelerates the regeneration of Fe^II and promotes the generation of active free radicals (•OH and •O₂^-). Fe^IV was detected during the process, which indicates that the high-valent iron-oxo species was produced in near-neutral pH conditions. The removal efficiency of SMX (10 mg L^-1) can reach 100.0% within 75 min over a wide pH range (4.0-9.0). After five cycles, the electrode retained a high stability and an outstanding catalytic capacity. Furthermore, the mechanisms and pathways for SMX degradation were proposed, the products and intermediates of SMX were analyzed, and the toxicity was evaluated. It was found that the toxicity decreased after degradation. This study displays a novel strategy for building an efficient and stable self-supporting electrode for treating antibiotic wastewater.

Strongly enhanced Fenton-like oxidation (Fe/peroxydisulfate) by BiOI under visible light irradiation: A novel and green strategy for Fe(III) reduction

In order to accelerate the photo-Fenton reaction process of Fe(III) under visible light irradiation, BiOI was introduced into the Fe(III)/peroxydisulfate (PDS) system. The catalytic oxidation performance of vis-light/BiOI/Fe(III)/PDS system was evaluated using bisphenol AF (BPAF) as a representative organic contaminant. Within 30 min, nearly 100% of BPAF was degraded, proving that the system had an excellent ability to degrade organic pollutants in water. Free radical quenching experiments, electron spin resonance (ESR), and molecular probing experiments determined that the main reactive species in the system were hydroxyl radicals (^•OH) and sulfate radicals (SO₄^•-). The comparative experiments showed that the degradation rates were closely related to the PDS consumption, while the Fe(II) absorbed on the surface of BiOI was responsible for the PDS consumption. The production pathway of Fe(II) was analyzed by XRD, FTIR and XPS characterization, the Fe(III) on the surface of BiOI was reduced by photogenerated electrons to generate Fe(II). The result confirmed that the reduction of Fe(III) by photogenerated electrons could effectively inhibit the recombination of electron-hole pairs, and accelerate the reduction progress of Fe(III)/Fe(II) cycle that was the rate-limiting step in PDS activation. Afterwards, a reliable mechanism for degradation of BPAF in visible light/BiOI/Fe(III)/PDS system was proposed. Finally, the influence of reactant dosages, visible light intensity, initial pH, humic acid (HA) and anions in the solution on the degradation of BPAF were discussed.

Overturned Loading of Inert CeO2 to Active Co3 O4 for Unusually Improved Catalytic Activity in Fenton-Like Reactions

In the past decades, numerous efforts have been devoted to improving the catalytic activity of nanocomposites by either exposing more active sites or regulating the interaction between the support and nanoparticles while keeping the structure of the active sites unchanged. Here, we report the fabrication of a Co₃ O₄ -CeO₂ nanocomposite via overturning the loading direction, i.e., loading an inert CeO₂ support onto active Co₃ O₄ nanoparticles. The resultant catalyst exhibits unexpectedly higher activity and stability in peroxymonosulfate-based Fenton-like reactions than its analog prepared by the traditional impregnation method. Abundant oxygen vacancies (O_v with a Co⋅⋅⋅O_v ⋅⋅⋅Ce structure instead of Co⋅⋅⋅O_v ) are generated as new active sites to facilitate the cleavage of the peroxide bond to produce SO₄ ^.- and accelerate the rate-limiting step, i.e., the desorption of SO₄ ^.- , affording improved activity. This strategy is a new direction for boosting the catalytic activity of nanocomposite catalysts in various scenarios, including environmental remediation and energy applications.

Catalyst-Free Periodate Activation by Solar Irradiation for Bacterial Disinfection: Performance and Mechanisms

Periodate (PI)-based advanced oxidation process has recently attracted great attention in the water treatment processes. In this study, solar irradiation was used for PI activation to disinfect waterborne bacteria. The PI/solar irradiation system could inactivate Escherichia coli below the limit of detection (LOD, 10 CFU mL^-1) with initial concentrations of 1 × 10⁶, 1 × 10⁷, and 1 × 10⁸ CFU mL^-1 within 20, 40, and 100 min, respectively. ^•O₂^- and ^•OH radicals contributed to the bacterial disinfection. These reactive radicals could attack and penetrate the cell membrane, thereby increasing the amount of intracellular reactive oxygen species and destroying the intracellular defense system. The damage of the cell membrane caused the leakage of intracellular K⁺ and DNA (that could be eventually degraded). Excellent bacterial disinfection performance in PI/solar irradiation systems was achieved in a wide range of solution pH (3-9), with coexisting humic acid (0.1-10 mg L^-1) and broad solution ionic strengths (15-600 mM). The PI/solar irradiation system could also efficiently inactivate Gram-positive Bacillus subtilis. Moreover, PI activated by natural sunlight irradiation could inactivate 1 × 10⁷ CFU mL^-1 viable E. coli below the LOD in the river and sea waters with a working volume of 1 L in 40 and 50 min, respectively. Clearly, the PI/solar system could be potentially applied to disinfect bacteria in water.

Chemoenzymatic Cascade Reaction for Green Cleaning of Polyamide Nanofiltration Membrane

Chemical cleaning is indispensable for the sustainable operation of nanofiltration (NF) in wastewater treatment. However, the common chemical cleaning methods are plagued by low cleaning efficiency, high chemical consumption, and separation performance deterioration. In this work, a chemoenzymatic cascade reaction is proposed for pollutant degradation and polyamide NF membrane cleaning. Glucose oxidase (GOD) enzymatic reaction in this cascade system produces hydrogen peroxide (H₂O₂) and gluconic acid to trigger the oxidation of foulants by Fe₃O₄-catalyzed Fenton reaction. By virtue of the microenvironment (pH and H₂O₂ concentration) engineering and substrate enrichments, this chemoenzymatic cascade reaction (GOD-Fe₃O₄) exhibits a favorable degradation efficiency for bisphenol A and methyl blue (MB). Thanks to the strong oxidizing degradation, the water flux of the NF10 membrane fouled by MB is almost completely recovered (∼95.8%) after a 3-cycle fouling/cleaning experiment. Meanwhile, the chemoenzymatic cascade reaction improves the applicability of the Fenton reaction in polyamide NF membrane cleaning because it prevents the membrane from damaging by high concentration of H₂O₂ and inhibits the secondary fouling caused by ferric hydroxide precipitates. By immobilizing GOD on the aminated Fe₃O₄ nanoparticles, a reusable cleaning agent is prepared for highly efficient membrane cleaning. This chemoenzymatic cascade reaction without the addition of an acid/base/oxidant provides a promising candidate for sustainable and cost-effective cleaning for the polyamide NF membrane.

Fast Generation of Hydroxyl Radicals by Rerouting the Electron Transfer Pathway via Constructed Chemical Channels during the Photo-Electro-Reduction of Oxygen

A strategy for the fast generation of hydroxyl radicals (HO·) via photo-electro-reduction of oxygen by rerouting the electron transfer pathway was proposed. The rate-determining step of HO· production is the formation of H₂O₂ and the simultaneous reduction of H₂O₂. Engineering of F-TiO₂ with single atom Pd bonded with four F and two O atoms favored the electrocatalytic 2-electron oxygen reduction to H₂O₂ with as high as 99% selectivity, while the additional channel bond HO-O···Pd-F-TiO₂ facilitates the photogenerated electron transfer from the conduction band to single atom Pd to reduce Pd···O-OH to HO·. The optimized HO· production rate is 9.18 μ mol L^-1 min^-1, which is 2.6-52.5 times higher than that in traditional advanced oxidation processes. In the application of wastewater treatment, this proposed photoelectrocatalytic oxygen reduction method, respectively, shows fast kinetics of 0.324 and 0.175 min^-1 for removing bisphenol A and acetaminophen. Around 93.2% total organic carbon and 99.3% acute toxicity removal were achieved. Additionally, the degradation efficiency was less affected by the water source and pH value because of the evitable usage of metallic active sites. This work represents a fundamental investigation on the generation rate of HO·, which would pave the way for the future development of photoelectrocatalytic technologies for water purification.

Exacerbated Protein Oxidation and Tyrosine Nitration through Nitrite-Enhanced Fenton Chemistry

Nitrite is a common additive used during meat curing to prevent microbial contamination and retain an attractive red color in the product. However, the effects of nitrite on Fenton reactions catalyzed by free iron in meat products are not well understood, although such processes can induce protein oxidation and nitration, affecting the nutritional and aesthetic quality of meat products. This contribution reveals the mechanism through which nitrite affects Fenton reactions that generate reactive nitrogen and oxygen species by increasing the availability of Fe³⁺, facilitating its reduction and stabilizing Fe²⁺, and accelerating Fe³⁺/Fe²⁺ cycling, leading to exacerbated oxidative and nitrosative stress on proteins, with implications not only for meat processing but also in many biological and environmental processes due to the ubiquitous presence of iron, hydrogen peroxide, and nitrite in nature.

Persistent free radicals in biochar enhance superoxide-mediated Fe(III)/Fe(II) cycling and the efficacy of CaO2 Fenton-like treatment

Superoxide radicals (O₂^•-) produced by the reaction of Fe(III) with H₂O₂ can regenerate Fe(II) in Fenton-like reactions, and conditions that facilitate this function enhance Fenton treatment. Here, we developed an efficient Fenton-like system by using calcium peroxide/biochar (CaO₂/BC) composites as oxidants and tartaric acid-chelated Fe(III) as catalysts, and tested it for enhanced O₂^•--based Fe(II) regeneration and faster sulfamethoxazole (SMX) degradation. SMX degradation rates and peroxide utilization efficiencies were significantly higher with CaO₂/BC than those with CaO₂ or H₂O₂ lacking BC. The CaO₂/BC system showed superior activity to reduce Fe(III), while kinetic analyses using chloroform as a O₂^•- probe inferred that the O₂^•- generation rate by CaO₂/BC was one-half of that by CaO₂. Apparently, O₂^•- is utilized more efficiently in this system to regenerate Fe(II) and enhance SMX degradation. Additionally, a positive correlation between SMX degradation rate constants and EPR signal intensities of biochar-derived persistent free radicals (PFRs) in CaO₂/BC was obtained. We postulate that PFRs enhanced Fe(III) reduction by shuttling electrons donated by O₂^•-. This represents a new strategy to augment the ability of superoxide to accelerate Fe(III)/Fe(II) cycling for increased hydroxyl radical production and organic pollutant removal in Fenton-like reactions.

Generation of singlet oxygen over CeO2/K, Na-codoped g-C3N4 for tetracycline hydrochloride degradation in a wide pH range

Singlet oxygen (1O2) were widely studied for catalytic oxidation and photo dynamic therapy (PDT) and so on due to its unique properties, such as its long lifetime, wide pH tolerance,...

Effective enhancement of electron migration and photocatalytic performance of nitrogen-rich carbon nitride by constructing fungal carbon dot/molybdenum disulfide cocatalytic system

To find a cocatalyst that can replace noble metals, fungal carbon dot (CD) modified molybdenum disulfide (MoS₂) cocatalyst system was designed. The composites were prepared by hydrothermal and calcination methods with different ratios of CDs, MoS₂ and nitrogen-rich carbon nitride (p-C₃N₅). p-C₃N₅ has excellent electronic properties, and MoS₂ modified by CDs (D-MoS₂) can significantly enhance the photocatalytic performance of p-C₃N₅ by improving the photogenerated electron migration efficiency. The experiments showed that the developed CDs/MoS₂/C₃N₅ composites exhibited excellent performance in both photocatalytic hydrogen (H₂) evolution and methylene blue (MB) degradation, with CMSCN5 (D-MoS₂ with 5% mass fraction) showing the best photocatalytic activity. The corresponding H₂ evolution rate of CMSCN5 was 444 μmol g^-1h^-1 and 1.45 times higher than that of unmodified p-C₃N₅, by 120 min, the removal rate of MB was up to 93.51%. The 5 cycle tests showed that CMSCN5 had great stability. The high charge mobility and high density of H₂ evolution active sites of MoS₂ nanosheets, together with the electron storage and transfer properties of CDs can obviously improve electron migration and reduce the photogenerated carrier recombination on the p-C₃N₅ surface. The design and preparation of such composites offer broad prospects for the development of photocatalytic systems with noble metal-free cocatalysts.

Mesoporous structure and amorphous Fe-N sites regulation in Fe-g-C3N4 for boosted visible-light-driven photo-Fenton reaction

Heterogeneous photo-Fenton catalysts prepared by doping metal ions in g-C₃N₄ are promising alternatives to traditional homogeneous Fenton catalysts, but are restricted by poor mesoporous structure and agglomerate of metal species. Recently, the highly uniformly dispersed metal-N active sites in various photocatalysts have been proved to be the critical reason for their enhanced catalytic activity. In this study based on reasonable control of mesoporous structure and metal-N active sites, mesoporous Fe-g-C₃N₄ was synthesized using a simple one-step thermal shrinkage polymerization method using ferrous oxalate as iron source and pore-forming agent. The Fe and N elements in the triazine ring skeleton of Fe-g-C₃N₄ form a σ-π bond, thus the photogenerated electrons can be quickly transferred to Fe³⁺ to form Fe²⁺ under the interaction of chemical bonds, accelerating the Fenton reaction rate. Density functional theory calculations results demonstrate that the energy band structure and electron cloud density distribution of Fe-Nx active structure are better than that of routine FeOx crystal structure with metal species agglomeration. In addition, the excellent mesoporous structure of Fe-g-C₃N₄ creates conditions for the high exposure of Fe-Nx active sites in the photo-Fenton reaction under visible light. The as-developed Fe-g-C₃N₄ system shows high recyclability and excellent photo-Fenton performance for removal of typical intractable pollutants (The degradation rate of dye and tetracycline reaches 98.2% and 98.7% at 60 and 120 min, respectively). This work provides a facile and sustainable route to develop mesoporous highly-active heterogeneous Fenton-like catalysts and even further general the design of general catalyst with ideal metal-N active sites, thereby promoting a feasible and efficient wastewater remediation solution.

Carbon Nitride Supported High-Loading Fe Single-Atom Catalyst for Activating of Peroxymonosulfate to Generate 1 O2 with 100 % Selectivity

Singlet oxygen (¹ O₂ ) is an excellent active species for the selective degradation of organic pollutions. However, it is difficult to achieve high efficiency and selectivity for the generation of ¹ O₂ . In this work, we develop a graphitic carbon nitride supported Fe single-atoms catalyst (Fe₁ /CN) containing highly uniform Fe-N₄ active sites with a high Fe loading of 11.2 wt %. The Fe₁ /CN achieves generation of 100 % ¹ O₂ by activating peroxymonosulfate (PMS), which shows an ultrahigh p-chlorophenol degradation efficiency. Density functional theory calculations results demonstrate that in contrast to Co and Ni single-atom sites, the Fe-N₄ sites in Fe₁ /CN adsorb the terminal O of PMS, which can facilitate the oxidization of PMS to form SO₅ ^.- , and thereafter efficiently generate ¹ O₂ with 100 % selectivity. In addition, the Fe₁ /CN exhibits strong resistance to inorganic ions, natural organic matter, and pH value during the degradation of organic pollutants in the presence of PMS. This work develops a novel catalyst for the 100 % selective production of ¹ O₂ for highly selective and efficient degradation of pollutants.