Trifluoromethyl functionalized polyindoles: electrosynthesis, characterization, and improved capacitive performance

Trifluoromethyl functionalized polyindoles, comb-like 5-PFMIn and flower-like 6-PFMIn, are prepared and they exhibit high specific capacitance and good stability.

Synthesis of Submicron PEDOT Particles of High Electrical Conductivity via Continuous Aerosol Vapor Polymerization

Current state-of-the-art synthetic strategies produce conducting polymers suffering from low processability and unstable chemical and/or physical properties stifling research and development. Here, we introduce a platform for synthesizing scalable submicron-sized particles of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The synthesis is based on a hybrid approach utilizing an aerosol of aqueous oxidant droplets and monomer vapor to engineer a scalable synthetic scheme. This aerosol vapor polymerization technology results in bulk quantities of discrete solid-state submicron particles (750 nm diameter) with the highest reported particle conductivity (330 ± 70 S/cm) so far. Moreover, particles are dispersible in organics and water, obviating the need for surfactants, and remain electrically conductive and doped over a period of months. This enhanced processability and environmental stability enable their incorporation in thermoplastic and cementitious composites for engineering chemoresistive pH and temperature sensors.

Direct Patterning of Highly Conductive PEDOT:PSS/Ionic Liquid Hydrogel via Microreactive Inkjet Printing

The gelation of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has gained popularity for its potential applications in three dimensions, while possessing tissue-like mechanical properties, high conductivity, and biocompatibility. However, the fabrication of arbitrary structures, especially via inkjet printing, is challenging because of the inherent gel formation. Here, microreactive inkjet printing (MRIJP) is utilized to pattern various 2D and 3D structures of PEDOT:PSS/IL hydrogel by in-air coalescence of PEDOT:PSS and ionic liquid (IL). By controlling the in-air position and Marangoni-driven encapsulation, single droplets of the PEDOT:PSS/IL hydrogel as small as a diameter of ≈260 μm are fabricated within ≈600 μs. Notably, this MRIJP-based PEDOT:PSS/IL has potential for freeform patterning while maintaining identical performance to those fabricated by the conventional spin-coating method. Through controlled deposition achieved via MRIJP, PEDOT:PSS/IL can be transformed into different 3D structures without the need for molding, potentially leading to substantial progress in next-generation bioelectronics devices.

Design and applications of stretchable and self-healable conductors for soft electronics

Soft and conformable electronics are emerging rapidly and is envisioned as the future of next-generation electronic devices where devices can be readily deployed in various environments, such as on-body, on-skin or as a biomedical implant. Modern day electronics require electrical conductors as the fundamental building block for stretchable electronic devices and systems. In this review, we will study the various strategies and methods of designing and fabricating materials which are conductive, stretchable and self-healable, and explore relevant applications such as flexible and stretchable sensors, electrodes and energy harvesters.

Cost-effective PEDOT:PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer

In this work, we report on a fabrication protocol to produce fully inkjet-printed temperature sensors on a bendable polyethylene terephthalate (PET) substrate. The sensing layer is made of polymer-based Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink that is electrically contacted by an underlying interdigitated electrode (IDE) structure based on a silver nanoparticle (AgNP) ink. Both inks are available commercially, and no further ink processing is needed to print them using a cost-effective consumer printer with standard cartridges. The fabricated sensor modules are tested for different IDE dimensions and post-deposition treatments of the AgNP film for their response to a temperature range of 20 to 70 °C and moisture range of 20 to 90% RH (relative humidity). Attributed to the higher initial resistance, sensor modules with a larger electrode spacing of 200 µm show a higher thermal sensitivity that is increased by a factor of 1.8 to 2.2 when compared to sensor modules with a 150 µm-spacing. In all cases, the sensors exhibit high linearity towards temperature and a response comparable to state of the art.

Ion Electron-Coupled Functionality in Materials and Devices Based on Conjugated Polymers

The coupling between charge accumulation in a conjugated polymer and the ionic charge compensation, provided from an electrolyte, defines the mode of operation in a vast array of different organic electrochemical devices. The most explored mixed organic ion-electron conductor, serving as the active electrode in these devices, is poly(3,4-ethyelenedioxythiophene) doped with polystyrelensulfonate (PEDOT:PSS). In this progress report, scientists of the Laboratory of Organic Electronics at Linköping University review some of the achievements derived over the last two decades in the field of organic electrochemical devices, in particular including PEDOT:PSS as the active material. The recently established understanding of the volumetric capacitance and the mixed ion-electron charge transport properties of PEDOT are described along with examples of various devices and phenomena utilizing this ion-electron coupling, such as the organic electrochemical transistor, ionic-electronic thermodiffusion, electrochromic devices, surface switches, and more. One of the pioneers in this exciting research field is Prof. Olle Inganäs and the authors of this progress report wish to celebrate and acknowledge all the fantastic achievements and inspiration accomplished by Prof. Inganäs all since 1981.

Two-Dimensional Growth of Large-Area Conjugated Polymers on Ice Surfaces: High Conductivity and Photoelectrochemical Applications

Polymerizing monomers on an atomically flat solid surface and air/water, solid/liquid, or liquid/liquid interface is now a rapidly emerging frontier. Dimension-controlled synthesis of π-conjugated polymers is of particular interest, which can be achieved by precise control of monomer distribution during the polymerization. The surface of ice allows rapid polymerization of monomers in the plane direction along the air-water interface to yield large-area two-dimensional sheet-like poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (2D sheet-like PEDOT:PSS) films with a thickness of ca. 30 nm. The persuasive role of ice chemistry is reflected in the high degree of crystallinity and superior conductivity of resultant PEDOT:PSS films. Excellent photoelectrochemical features were further disclosed when the ice-templated PEDOT:PSS films were coupled to quantum dots. Utilization of these polymer films in photovoltaic devices also resulted in excellent current density and power conversion efficiency. This work presents an innovative material technology that goes beyond traditional and ubiquitous inorganic 2D materials such as graphene and MoS₂ for integrated electronic applications.

Computational microscopy study of the granular structure and pH dependence of PEDOT:PSS

Computational microscopy based on Martini coarse grained molecular dynamics (MD) simulations of a doped conducting polymer poly(3,4-ethylenedioxythiophene)polystyrene sulfonate (best known as PEDOT:PSS) was performed focussing on the formation of the granular structure and PEDOT crystallites, and the effect of pH on the material morphology. The PEDOT:PSS morphology is shown to be sensitive to the initial distribution of PEDOT and PSS in the solution, and the results of the modelling suggest that the experimentally observed granular structure of PEDOT:PSS can be only obtained if the PEDOT/PSS solution is in the dispersive state in the initial crystallization stages. Variation of the pH is demonstrated to strongly affect the morphology of PEDOT:PSS films, altering their structure between granular-type and homogeneous. It also affects the size of crystallites and the relative arrangement of PEDOT and PSS chains. It is shown that the crystallites in PEDOT:PSS are smaller than those in PEDOT with molecular counterions such as PEDOT:tosylate, which is consistent with the available experimental data. The predicted changes of the PEDOT:PSS morphology with variation of the pH can be tested experimentally, and the calculated atomistic picture of PEDOT:PSS films (not accessible by conventional experimental techniques) is instrumental for understanding the material structure and building realistic models of PEDOT:PSS morphology.

Stretchable Conductive Polymers and Composites Based on PEDOT and PEDOT:PSS

The conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT), and especially its complex with poly(styrene sulfonate) (PEDOT:PSS), is perhaps the most well-known example of an organic conductor. It is highly conductive, largely transmissive to light, processible in water, and highly flexible. Much recent work on this ubiquitous material has been devoted to increasing its deformability beyond flexibility-a characteristic possessed by any material that is sufficiently thin-toward stretchability, a characteristic that requires engineering of the structure at the molecular- or nanoscale. Stretchability is the enabling characteristic of a range of applications envisioned for PEDOT in energy and healthcare, such as wearable, implantable, and large-area electronic devices. High degrees of mechanical deformability allow intimate contact with biological tissues and solution-processable printing techniques (e.g., roll-to-roll printing). PEDOT:PSS, however, is only stretchable up to around 10%. Here, the strategies that have been reported to enhance the stretchability of conductive polymers and composites based on PEDOT and PEDOT:PSS are highlighted. These strategies include blending with plasticizers or polymers, deposition on elastomers, formation of fibers and gels, and the use of intrinsically stretchable scaffolds for the polymerization of PEDOT.

Shape-Memory Assisted Scratch-Healing of Transparent Thiol-Ene Coatings

A photopolymerizable thiol-ene composition was prepared as a mixture of pentaerythritol tetrakis(3-mercaptopropionate) (PETMP) and 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TTT), with 1 wt. % of 2,2-dimethoxy-2-phenylacetophenone (DMPA) photoinitiator. A systematic analytical analysis that investigated the crosslinked PETMP-TTT polymer coatings employed Fourier transform infrared spectroscopy, ultraviolet⁻visible spectroscopy, differential scanning calorimetry, thermogravimetric analysis, pencil hardness, thermo-mechanical cyclic tensile, scratch testing, and atomic force microscopy. These coatings exhibited high optical transparency and shape-memory that assisted scratch-healing properties. Scratches produced on the PETMP-TTT polymer coatings with different constant loadings (1.2 N, 1.5 N, and 2.7 N) were completely healed after the external stimulus was applied. The strain recovery ratio and total strain recovery ratio for PETMP-TTT polymer were found to be better than 94 ± 1% and 97 ± 1%, respectively. The crosslinked PETMP-TTT polymer network was also capable of initiating scratch recovery at ambient temperature conditions.

Substrate-Dependent Morphology and Its Effect on Electrical Mobility of Doped Poly(3,4-ethylenedioxythiophene) (PEDOT) Thin Films

Deposition dynamics, crystallization, molecular packing, and electronic mobility of poly(3,4-ethylenedioxythiophene) (PEDOT) thin films are affected by the nature of the substrate. Computational microscopy has been carried out to reveal the morphology-substrate dependence for PEDOT thin films doped with molecular tosylate deposited on different substrates including graphite, Si₃N₄, silicon, and amorphous SiO₂. It is shown that the substrate is instrumental in formation of the lamellar structure. PEDOT films on the ordered substrates (graphite, Si₃N₄, and silicon) exhibit preferential face-on orientation, with graphite showing the most ordered and pronounced face-on packing. In contrast, PEDOT on amorphous SiO₂ exhibits the dominant edge-on orientation, except in the dry state where both packings are equally presented. The role of water and the porosity of the substrate in formation of the edge-on structure on SiO₂ is outlined. On the basis of the calculated morphology, the multiscale calculations of the electronic transport and percolative analysis are performed outlining how the character of the substrate affects the electron mobility. It is demonstrated that good crystallinity (PEDOT on graphite substrate) and high content of edge-on (PEDOT on SiO₂ substrate) are not enough to achieve the highest electrical in-plane mobility. Instead, the least ordered material with lower degree of the edge-on content (PEDOT on silicon substrate) provides the highest mobility because it exhibits an efficient network of π-π stacked chain extending throughout the entire sample.

Positively-charged hierarchical PEDOT interface with enhanced electrode kinetics for NADH-based biosensors

Poly(ethylenedioxythiophene) (PEDOT) has attracted considerable attention as an advanced electrode material for electrochemical sensors and biosensors, due to its unique electrical and physicochemical properties. Here, we demonstrate the facile preparation of a positively-charged and hierarchical micro-structured PEDOT electrochemical interface with enhanced electrode kinetics for the electrooxidation of NADH. Processable PEDOT colloidal microparticles (PEDOT CMs) were synthesised by template-assisted polymerisation and were then utilised as building blocks for the fabrication of hierarchically-structured electrodes with a larger accessible electroactive surface (2.8 times larger than that of the benchmark PEDOT:PSS) and inter-particle space, thus improving electrode kinetics. The intrinsic positive charge of the PEDOT CMs further facilitated the detection of negatively-charged molecules by electrostatic accumulation. Due to the synergistic effect, these hierarchically-structured PEDOT CMs electrodes exhibited improved NADH electrooxidation at lower potentials and enhanced electrocatalytic activity compared to the compact structure of conventional PEDOT:PSS electrodes. The PEDOT CMs electrodes detected NADH over the range of 20-240 μM, with a sensitivity of 0.0156 μA/μM and a limit of detection of 5.3 μM. Moreover, the PEDOT CMs electrode exhibited a larger peak separation from the interferent ascorbic acid, and improved stability. This enhanced analytical performance for NADH provides a sound basis for further work coupling to a range of NAD-dependent dehydrogenases for applications in biosensing, bio-fuel cells and biocatalysis.

A nonconjugated radical polymer glass with high electrical conductivity

Solid-state conducting polymers usually have highly conjugated macromolecular backbones and require intentional doping in order to achieve high electrical conductivities. Conversely, single-component, charge-neutral macromolecules could be synthetically simpler and have improved processibility and ambient stability. We show that poly(4-glycidyloxy-2,2,6,6-tetramethylpiperidine-1-oxyl), a nonconjugated radical polymer with a subambient glass transition temperature, underwent rapid solid-state charge transfer reactions and had an electrical conductivity of up to 28 siemens per meter over channel lengths up to 0.6 micrometers. The charge transport through the radical polymer film was enabled with thermal annealing at 80°C, which allowed for the formation of a percolating network of open-shell sites in electronic communication with one another. The electrical conductivity was not enhanced by intentional doping, and thin films of this material showed high optical transparency.

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review

Stretchable electronics promise to naturalize the way that we are surrounded by and interact with our devices. Sensors that can stretch and bend furthermore have become increasingly relevant as the technology behind them matures rapidly from lab-based workflows to industrially applicable production principles. Regardless of the specific materials used, creating stretchable conductors involves either the implementation of strain reliefs through insightful geometric patterning, the dispersion of stiff conductive filler in an elastomeric matrix, or the employment of intrinsically stretchable conductive materials. These basic principles however have spawned a myriad of materials systems wherein future application engineers need to find their way. This paper reports a literature study on the spectrum of different approaches towards stretchable electronics, discusses standardization of characteristic tests together with their reports and estimates matureness for industry. Patterned copper foils that are embedded in elastomeric sheets, which are closest to conventional electronic circuits processing, make up one end of the spectrum. Furthest from industry are the more recent circuits based on intrinsically stretchable liquid metals. These show extremely promising results, however, as a technology, liquid metal is not mature enough to be adapted. Printing makes up the transition between both ends, and is also well established on an industrial level, but traditionally not linked to creating electronics. Even though a certain level of maturity was found amongst the approaches that are reviewed herein, industrial adaptation for consumer electronics remains unpredictable without a designated break-through commercial application.

Poly(3,4-ethylenedioxythiophene) (PEDOT) Derivatives: Innovative Conductive Polymers for Bioelectronics

Poly(3,4-ethylenedioxythiophene)s are the conducting polymers (CP) with the biggest prospects in the field of bioelectronics due to their combination of characteristics (conductivity, stability, transparency and biocompatibility). The gold standard material is the commercially available poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). However, in order to well connect the two fields of biology and electronics, PEDOT:PSS presents some limitations associated with its low (bio)functionality. In this review, we provide an insight into the synthesis and applications of innovative poly(ethylenedioxythiophene)-type materials for bioelectronics. First, we present a detailed analysis of the different synthetic routes to (bio)functional dioxythiophene monomer/polymer derivatives. Second, we focus on the preparation of PEDOT dispersions using different biopolymers and biomolecules as dopants and stabilizers. To finish, we review the applications of innovative PEDOT-type materials such as biocompatible conducting polymer layers, conducting hydrogels, biosensors, selective detachment of cells, scaffolds for tissue engineering, electrodes for electrophysiology, implantable electrodes, stimulation of neuronal cells or pan-bio electronics.

Mass preparation of micro/nano-powders of biochar with water-dispersibility and their potential application

A novel strategy for micro/nano-structural and/or water dispersible biochars and their potential application in new and traditional fields.