Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application

Electrospun PDLLA/PLGA composite membranes for potential application in guided tissue regeneration

With the aim to explore a membrane system with appropriate degradation rate and excellent cell-occlusiveness for guided tissue regeneration (GTR), a series of poly(D, L-lactic acid) (PDLLA)/poly(D, L-lactic-co-glycolic acid) (PLGA) (100/0, 70/30, 50/50, 30/70, 0/100, w/w) composite membranes were fabricated via electrospinning. The fabricated membranes were evaluated by morphological characterization, water contact angle measurement and tensile test. In vitro degradation was characterized in terms of the weight loss and the morphological change. Moreover, in vitro cytologic research revealed that PDLLA/PLGA composite membranes could efficiently inhibit the infiltration of 293 T cells. Finally, subcutaneous implant test on SD rat in vivo showed that PDLLA/PLGA (70/30, 50/50) composite membranes could function well as a physical barrier to prevent cellular infiltration within 13 weeks. These results suggested that electrospun PDLLA/PLGA (50/50) composite membranes could serve as a promising barrier membrane for guided tissue regeneration due to suitable biodegradability, preferable mechanical properties and excellent cellular shielding effects.

A novel bioactive membrane by cell electrospinning

Electrospinning permits fabrication of biodegradable matrices that can resemble the both scale and mechanical behavior of the native extracellular matrix. However, achieving high-cellular density and infiltration of cells within matrices with traditional technique remain challenging and time consuming. The cell electrospinning technique presented in this paper can mitigate the problems associated with these limitations. Cells encapsulated by the material in the cell electrospinning technique survived well and distributed homogenously within the nanofibrous membrane, and their vitality was improved to 133% after being cultured for 28 days. The electrospun nanofibrous membrane has a certain degradation property and favorable cell-membrane interaction that supports the active biocompatibility of the membrane. Its properties are helpful for supporting cell attachment and growth, maintaining phenotypic shape, and secreting an ample amount of extracellular matrix (ECM). This novel membrane may be a potential application within the field of tissue engineering. The ability of cell electrospinning to microintegrate cells into a biodegradable fibrous matrix embodies a novel tissue engineering approach that could be applied to fabricate a high cell density elastic tissue mimetic.

Optimization of sterilization methods for electrospun poly(ε-caprolactone) to enhance pre-osteoblast cell behaviors for guided bone regeneration

The aim of this study was to determine the optimal sterilization procedure for biodegradable polyester-based guided bone regeneration membranes. The effects of sterilization using low-temperature hydrogen peroxide gas plasma, 75% ethanol (EtOH; two soaking times), and ultraviolet radiation on the structure and biological properties of electrospun poly(ε-caprolactone) membranes were investigated. The results demonstrated that all were effective sterilization methods. The membranes were then assessed for surface structure, wettability, and in vitro cellular responses including osteogenic differentiation by seeding with pre-osteoblasts (MC3T3-E1 cells). The cells grew well on all the sterilized membranes. The low-temperature hydrogen peroxide gas plasma–sterilized membranes, which exhibited significantly improved hydrophilicity ( p < 0.05), were better for cell osteogenic differentiation compared to the membranes sterilized by other methods. In addition, the cell behavior on the membranes sterilized by EtOH was superior to those sterilized by ultraviolet radiation. Finally, EtOH soaking time appeared to influence cell behavior. The results suggested that low-temperature hydrogen peroxide gas plasma treatment is the most promising method to sterilize electrospun poly(ε-caprolactone) membranes for guided bone regeneration.

Development and characterization of novel ZnO-loaded electrospun membranes for periodontal regeneration

OBJECTIVES

This study reports on the synthesis, materials characterization, antimicrobial capacity, and cytocompatibility of novel ZnO-loaded membranes for guided tissue/bone regeneration (GTR/GBR).

METHODS

Poly(ɛ-caprolactone) (PCL) and PCL/gelatin (PCL/GEL) were dissolved in hexafluoropropanol and loaded with ZnO at distinct concentrations: 0 (control), 5, 15, and 30wt.%. Electrospinning was performed using optimized parameters and the fibers were characterized via scanning and transmission electron microscopies (SEM/TEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), contact angle (CA), mechanical testing, antimicrobial activity against periodontopathogens, and cytotoxicity test using human dental pulp stem cells (hDPSCs). Data were analyzed using ANOVA and Tukey (α=5%).

RESULTS

ZnO nanoparticles were successfully incorporated into the overall submicron fibers, which showed fairly good morphology and microstructure. Upon ZnO nanoparticles' incorporation, the PCL and PCL/GEL fibers became thicker and thinner, respectively. All GEL-containing membranes showed lower CA than the PCL-based membranes, which were highly hydrophobic. Overall, the mechanical properties of the membranes were reduced upon ZnO incorporation, except for PCL-based membranes containing ZnO at the 30wt.% concentration. The presence of GEL enhanced the stretching ability of membranes under wet conditions. All ZnO-containing membranes displayed antibacterial activity against the bacteria tested, which was generally more pronounced with increased ZnO content. All membranes synthesized in this study demonstrated satisfactory cytocompatibility, although the presence of 30wt.% ZnO led to decreased viability.

SIGNIFICANCE

Collectively, this study suggests that PCL- and PCL/GEL-based membranes containing a low content of ZnO nanoparticles can potentially function as a biologically safe antimicrobial GTR/GBR membrane.

Electrospun Gelatin/β-TCP Composite Nanofibers Enhance Osteogenic Differentiation of BMSCs and In Vivo Bone Formation by Activating Ca (2+) -Sensing Receptor Signaling

Calcium phosphate- (CaP-) based composite scaffolds have been used extensively for the bone regeneration in bone tissue engineering. Previously, we developed a biomimetic composite nanofibrous membrane of gelatin/β-tricalcium phosphate (TCP) and confirmed their biological activity in vitro and bone regeneration in vivo. However, how these composite nanofibers promote the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) is unknown. Here, gelatin/β-TCP composite nanofibers were fabricated by incorporating 20 wt% β-TCP nanoparticles into electrospun gelatin nanofibers. Electron microscopy showed that the composite β-TCP nanofibers had a nonwoven structure with a porous network and a rough surface. Spectral analyses confirmed the presence and chemical stability of the β-TCP and gelatin components. Compared with pure gelatin nanofibers, gelatin/β-TCP composite nanofibers caused increased cell attachment, proliferation, alkaline phosphatase activity, and osteogenic gene expression in rat BMSCs. Interestingly, the expression level of the calcium-sensing receptor (CaSR) was significantly higher on the composite nanofibrous scaffolds than on pure gelatin. For rat calvarial critical sized defects, more extensive osteogenesis and neovascularization occurred in the composite scaffolds group compared with the gelatin group. Thus, gelatin/β-TCP composite scaffolds promote osteogenic differentiation of BMSCs in vitro and bone regeneration in vivo by activating Ca²⁺-sensing receptor signaling.

Dimensionally stable and bioactive membrane for guided bone regeneration: An in vitro study

Composite fibrous electrospun membranes based on poly(dl-lactide) (PLA) and poly(ε-caprolactone) (PCL) were engineered to include borate bioactive glass (BBG) for the potential purposes of guided bone regeneration (GBR). The fibers were characterized using scanning and transmission electron microscopies, which respectively confirmed the submicron fibrous arrangement of the membranes and the successful incorporation of BBG particles. Selected mechanical properties of the membranes were evaluated using the suture pullout test. The addition of BBG at 10 wt % led to similar stiffness, but more importantly, it led to a significantly stronger (2.37 ± 0.51 N mm) membrane when compared with the commercially available Epiguide® (1.06 ± 0.24 N mm) under hydrated conditions. Stability (shrinkage) was determined after incubation in a phosphate buffer solution from 24 h up to 9 days. The dimensional stability of the PLA:PCL-based membranes with or without BBG incorporation (10.07-16.08%) was similar to that of Epiguide (14.28%). Cell proliferation assays demonstrated a higher rate of preosteoblasts proliferation on BBG-containing membranes (6.4-fold) over BBG-free membranes (4- to 5.8-fold) and EpiGuide (4.5-fold), following 7 days of in vitro culture. Collectively, our results demonstrated the ability to synthesize, via electrospinning, stable, polymer-based submicron fibrous BBG-containing membranes capable of sustaining osteoblastic attachment and proliferation-a promising attribute in GBR.

Star-shaped PCL/PLLA blended fiber membrane via electrospinning

Electrospun fiber mesh has been a candidate for guided bone regeneration membrane. However, its poor mechanics property has been limited in clinical application. In this study, various star-shaped poly(ε-caprolactones) (PCLs) are successfully synthesized by ring-opening polymerization and mixed with poly(l-lactide) (PLLA) to be made into blended membranes through electrospinning. Their corresponding properties are evaluated including morphology, thermodynamics, mechanics, and cytotoxicity. The blended fibers show smooth surface and well-distributed structure, which have slight differences in morphology with the change of arm number of star-shaped PCL. Crystallization of the fibrous membrane is influenced by star-shaped PCLs. Glass temperature drops from 64.23 °C for pure PLLA membrane to 53.62-49 °C for the blended membranes. The membranous tensile strength is depended strongly on star-shaped PCLs. The tensile strength goes up with arm number increasing; on the contrary, at the same arm number, the mechanics strength decreases with molecular weight increasing. And the fibrous membrane containing 20 wt.% star-shaped PCL shows better mechanics property compared to the other membranes. The star-shaped PCL/PLLA fiber membrane is not cytotoxicity.

PCL-forsterite nanocomposite fibrous membranes for controlled release of dexamethasone

The well-known treatment of the alveolar bone defects is guided tissue regeneration (GTR). Engineered membranes combined with osteo-differentiation factors have been offered a promising strategy for GTR application. Recently, poly(ε-caprolactone) (PCL)-forsterite (PCL-F) nanocomposite fibrous membranes have been developed. However, PCL-F membranes could not promote bone tissue regeneration. The aim of this research is to encapsulate an osteogenic factor [dexamethasone (DEX)] in PCL-F membranes and evaluate the effects of forsterite nanopowder (particle size = 25-45 nm) and fiber organization on DEX delivery for GTR application. The hypothesis is that the release kinetic and profile of DEX could be controlled through variation of forsterite content (0, 5 and 10 wt%) and fiber arrangement (aligned and random). Results demonstrated while DEX release was sustained over a period of 4 weeks, its kinetic was governed by the membrane architecture and composition. For example, aligned PCL-F nanocomposite fibrous membrane consisting of 10 %(w/v) forsterite nanopowder exhibited the least initial burst release (13 % release in the first 12 h) and allowed sustained release of DEX. Additionally, forsterite nanopowder inclusion changed the kinetic of DEX release from Fickian diffusion to an anomalous transport. The bioactivity of released DEX was estimated using culturing the stem cells from human exfoliated deciduous teeth (SHED) on the membranes. Results demonstrated that proliferation and osteogenic differentiation of SHED could be governed by DEX release process. While DEX release from the membranes decreased SHED proliferation, stimulated the matrix mineralization. Our finding indicated that aligned PCL-F/DEX membrane could be used as a carrier for the sustained release of drugs relevant for GTR trophy.

Preparation of alternating multilayered polyethylene oxide/poly(ε-caprolactone) and the confined crystallization of the composites

Due to the effects of the interfacial interaction between PEO and PCL layers and the spatial confinement. The crystallization behaviors of PEO and PCL in multilayered structure varied distinguishably as the layer number became higher.

Electrospun hydroxyethyl cellulose nanofibers functionalized with calcium phosphate coating for bone tissue engineering

Calcium phosphate coated HEC/PVA nanofibrous scaffolds for bone tissue engineering applications.

Organic/inorganic composite membranes based on poly(L-lactic-co-glycolic acid) and mesoporous silica for effective bone tissue engineering

Fabrication of membranes with excellent biocompatibility and bioactivity remains an important technical challenge in bone tissue engineering. In this paper, poly(l-lactic-co-glycolic acid) (PLGA)-SBA15 (Santa Barbara Amorphous 15) composite membranes were prepared by using an electrospinning technique; PLGA was used as a biocompatible and biodegradable polymer and SBA15 was used as a mesoporous silica. The PLGA-SBA15 composite membrane facilitates the cell attachment and the cell proliferation versus pure PLGA membrane where human bone marrow-derived mesenchymal stem cells (hMSCs) were seeded. Furthermore, the analysis of alkaline phosphatase (ALP) activity indicated that this PLGA-SBA15 composite membrane has better osteogenic induction compared with the pure PLGA membrane. Moreover, the presence of SBA15 increased the loading efficiency of the recombinant human bone morphogenetic protein-2 (rhBMP-2) to the membranes. Furthermore, the composite membrane had optimized sustained release of rhBMP-2. Overall, this PLGA-SBA15 composite is an excellent material for bone tissue engineering.

Engineering of biomimetic nanofibrous matrices for drug delivery and tissue engineering

Biomimetic nanofibers have emerged as promising candidates for drug delivery and tissue engineering applications. In this paper, recent advances on the fabrication and application of biomimetic nanofibers as drug carriers and scaffolding materials are reviewed. First, we delineate the three popular nanofiber fabrication techniques including electrospinning, phase separation and molecular self-assembly, covering the principal materials used for different techniques and surface functionalization strategies for nanofibers. Furthermore, we focus our interest on the nanofiber-based delivery strategies and underlying kinetics for growth factors and other bioactive molecules, following which we summarize the recent advances in the development of these nanofibrous matrices for bone, vascular and neural tissue engineering applications. Finally, research challenges and future trends in the related areas are discussed.

Guided bone regeneration produced by new mineralized and reticulated collagen membranes in critical-sized rat calvarial defects

The aim of this study was to evaluate the bone regenerative effect of glutaraldehyde (GA) cross-linking on mineralized polyanionic collagen membranes in critical-sized defects on rat calvarias. Bone calvarial defects were induced in Wistar rats, which were then divided into five groups: a sham group; a control group, which received a commercial membrane; and GA, 25GA, and 75GA groups, which received one of three different polyanionic collagen membranes mineralized by 0, 25, or 75 hydroxyapatite cycles and then cross-linked by GA. Bone formation was evaluated based on digital radiography and computerized tomography. Histological analyses were performed 4 and 12 weeks after the surgical procedure to observe bone formation, membrane resorption, and fibrous tissue surrounding the membranes. Measurement of myeloperoxidase activity, tumor necrosis factor alpha, and interleukin 1beta production was performed 24 h after surgery. The percentage of new bone formation in the GA, 25GA, and 75GA groups was higher compared with the control and sham groups. In the GA and 25 GA groups, the membranes were still in place and were contained in a thick fibrous capsule after 12 weeks. No significant difference was found among the groups regarding myeloperoxidase activity and interleukin 1beta levels, although the GA, 25GA, and 75GA groups presented decreased levels of tumor necrosis factor alpha compared with the control group. These new GA cross-linked membranes accelerated bone healing of the calvarium defects and did not induce inflammation. In addition, unlike the control membrane, the experimental membranes were not absorbed during the analyzed period, so they may offer advantages in large bone defects where prolonged membrane barrier functions are desirable.

Electrospun fibrous scaffolds combined with nanoscale hydroxyapatite induce osteogenic differentiation of human periodontal ligament cells

Periodontal repair is a complex process in which regeneration of alveolar bone is a vital component. The aim of this study was to develop a biodegradable scaffold with good biocompatibility and osteoinductive ability. Two types of composite fibrous scaffolds were produced by electrospinning, ie, type I collagen/poly(ε-caprolactone) (COL/PCL) and type I collagen/poly(ε-caprolactone)/nanoscale hydroxyapatite (COL/PCL/nHA) with an average fiber diameter of about 377 nm. After a simulated body fluid (SBF) immersion test, the COL/PCL/nHA-SBF scaffold developed a rough surface because of the calcium phosphate deposited on the fibers, suggesting that the presence of nHA promoted the mineralization potential of the scaffold. Energy dispersive X-ray spectroscopy clearly showed the calcium and phosphorus content in the COL/PCL/nHA and COL/PCL/nHA-SBF scaffolds, confirming the findings of nHA and calcium phosphate precipitation on scanning electron micrographs. Water contact analysis revealed that nHA could improve the hydrophilic nature of the COL/PCL/nHA-SBF scaffold. The morphology of periodontal ligament cells cultured on COL/PCL-SBF and COL/PCL/nHA-SBF was evaluated by scanning electron microscopy. The results showed that cells adhered to either type of scaffold and were slightly spindle-shaped in the beginning, then extended gradually with stretched filopodia, indicating an ability to fill the fiber pores. A Cell Counting Kit-8 assay showed that both scaffolds supported cell proliferation. However, real-time quantitative polymerase chain reaction analysis showed that expression of the bone-related markers, alkaline phosphatase and osteocalcin, was upregulated only on the COL/PCL/nHA-SBF scaffold, indicating that this scaffold had the ability to induce osteogenic differentiation of periodontal ligament cells. In this study, COL/PCL/nHA-SBF produced by electrospinning followed by biomimetic mineralization had combined electrospun fibers with nHA in it. This scaffold has good biocompatibility and osteoinductive ability as a result of the characteristics of nHA, so could be innovatively applied to periodontal tissue engineering as a potential scaffold.

Electrospun poly(butylene carbonate) membranes for guided bone regeneration: In vitro and in vivo studies

A nonwoven membrane for guided bone regeneration, constituting of poly(butylene carbonate), with a backbone that is similar to poly(ϵ-caprolactone), was prepared by electrospinning. The as-fabricated poly(butylene carbonate) membranes were to be used as guided bone regeneration membranes with efficacies equal to or better than poly(ϵ-caprolactone) membranes. The contact angles of electrospun poly(butylene carbonate) membranes (fPBC) (101.90 ± 4.19°) were lower than those for electrospun poly(ϵ-caprolactone) membranes (fPCL) (117.79 ± 3.38°) ( p < 0.01). To examine the biocompatibility, we investigated cell morphology, proliferation, and differentiation in vitro. The bone regenerative efficacy was evaluated in rat calvarial defect. The cell numbers were increased in accordance with culture period. Cells had a stellate shape and broad cytoplasmic extensions on the membrane. Alkaline phosphatase activity was significantly higher on fPBC than on fPCL ( p < 0.05). Defects covered by fPBC and fPCL achieved a similar degree of regeneration at 4 weeks in vivo and were significantly better than uncovered samples ( p < 0.01).Based on the results of this study, the potential for using electrospun poly(butylene carbonate) membranes in guided bone regeneration is highly significant . In addition, poly(butylene carbonate) could be a promising alternative to poly(ϵ-caprolactone) for biomedical applications.

Enrichment of breast cancer stem-like cells by growth on electrospun polycaprolactone-chitosan nanofiber scaffolds

A small population of highly tumorigenic breast cancer cells has recently been identified. These cells, known as breast-cancer stem-like cells (BCSC), express markers similar to mammary stem cells, and are highly resistant to chemotherapy. Currently, study of BCSC is hampered by the inability to propagate these cells in tissue culture without inducing differentiation. Recently, it was reported that proliferation and differentiation can be modified by culturing cells on electrospun nanofibers. Here, we sought to characterize the chemoresistance and stem-like properties of breast cancer cell lines grown on nanofiber scaffolds. Cells cultured on three-dimensional templates of electrospun poly(ε-caprolactone)-chitosan nanofibers showed increases in mammary stem cell markers and in sphere-forming ability compared with cells cultured on polystyrene culture dishes. There was no increase in proliferation of stem cell populations, indicating that culture on nanofibers may inhibit differentiation of BCSC. The increase in stemness was accompanied by increases in resistance to docetaxel and doxorubicin. These data indicate that BCSC populations are enriched in cells cultured on electrospun poly(ε-caprolactone)-chitosan nanofibers, scaffolds that may provide a useful system to study BCSC and their response to anticancer drug treatment.

Biodegradable poly(butylene-carbonate) porous membranes for guided bone regeneration: In vitro and in vivo studies

Poly(butylene-carbonate) is a potential alternative to poly(ε-caprolactone) for biomedical application. Although mechanical properties of porous poly(butylene-carbonate) membranes were inferior to poly(ε-caprolactone), its contact angles (47.41° ± 1.17°) were lower than poly(ε-caprolactone) (77.24° ± 0.54°) (p < 0.001). It degraded faster than poly(ε-caprolactone) during a 10-week in vitro experiment (p < 0.01). Moreover, it had excellent bioactivity during simulated body fluid immersion. Cell spreading on poly(butylene-carbonate) was better than that on poly(ε-caprolactone). Cell behavior tests including cytotoxicity, proliferation, and differentiation were performed. The poly(butylene-carbonate) is more compatible with cells and promotes cell differentiation. In vivo, the defects covered by poly(butylene-carbonate) and poly(ε-caprolactone) membranes had a similar degree of regeneration at 4 weeks. It was concluded that poly(butylene-carbonate) could potentially be used to guide bone regeneration, and it is a potential new biodegradable polymer.

Biphasic calcium phosphate loading on polycaprolactone/poly(lacto-co-glycolic acid) membranes for improved tensile strength, in vitro biocompatibility, and in vivo tissue regeneration

Electrospun polycaprolactone and poly(lacto- co-glycolide) membranes were loaded with biphasic calcium phosphate powder to facilitate osteoconductivity. Different concentrations of biphasic calcium phosphate powder were added to the polymer solution, and successful loading was confirmed by X-ray diffraction analysis, transmission electron microscope, and scanning electron microscope with energy-dispersive spectroscopy visualization. The effect of the added biphasic calcium phosphate on the polymer membrane was investigated in terms of the material’s tensile strength and strain, in vitro cytocompatibility, and in vivo tissue regeneration. It was observed that the tensile strength of the membranes increased with the addition of the biphasic calcium phosphate powder. Immersion in simulated body fluid solution for seven days leads to the formation of apatite-like deposits in the fibers, which further improved the mechanical stability. Moreover, proliferation and adhesion of osteoblast-like cells were more apparent upon the addition of the biphasic calcium phosphate powder as seen with the increasing cell density from (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and micrographs from scanning electron microscope and confocal microscopy. Sample membranes were also implanted to investigate the membrane’s ability to regenerate bone in a rat calvarium. Histological staining and micro-CT histomorphometric analyses showed neo-bone formation in the implanted rat skull.

An amphiphilic degradable polymer/hydroxyapatite composite with enhanced handling characteristics promotes osteogenic gene expression in bone marrow stromal cells

Electrospun polymer/hydroxyapatite (HA) composites combining biodegradability with osteoconductivity are attractive for skeletal tissue engineering applications. However, most biodegradable polymers such as poly(lactic acid) (PLA) are hydrophobic and do not blend with adequate interfacial adhesion with HA, compromising the structural homogeneity, mechanical integrity and biological performance of the composite. To overcome this challenge, we combined a hydrophilic polyethylene glycol (PEG) block with poly(d,l-lactic acid) to improve the adhesion of the degradable polymer with HA. The amphiphilic triblock copolymer PLA-PEG-PLA (PELA) improved the stability of HA-PELA suspension at 25wt.% HA content, which was readily electrospun into HA-PELA composite scaffolds with uniform fiber dimensions. HA-PELA was highly extensible (failure strain>200% vs. <40% for HA-PLA), superhydrophilic (∼0° water contact angle vs. >100° for HA-PLA), and exhibited an 8-fold storage modulus increase (unlike deterioration for HA-PLA) upon hydration, owing to the favorable interaction between HA and PEG. HA-PELA also better promoted osteochondral lineage commitment of bone marrow stromal cells in unstimulated culture and supported far more potent osteogenic gene expression upon induction than HA-PLA. We demonstrate that the chemical incorporation of PEG is an effective strategy to improve the performance of degradable polymer/HA composites for bone tissue engineering applications.

Role of bioactive 3D hybrid fibrous scaffolds on mechanical behavior and spatiotemporal osteoblast gene expression

Three-dimensional (3D) bioactive organic-inorganic (O/I) hybrid fibrous scaffolds are attractive extracellular matrix (ECM) surrogates for bone tissue engineering. With the aim of regulating osteoblast gene expression in 3D, a new class of hybrid fibrous scaffolds with two distinct fiber diameters (260 and 600 nm) and excellent physico-mechanical properties were fabricated from tertiary (SiO2-CaO-P2O5) bioactive glass (BG) and poly (ε-caprolactone) (PCL) by in situ sol-gel and electrospinning process. The PCL/BG hybrid fibrous scaffolds exhibited accelerated wetting properties, enhanced pore sizes and porosity, and superior mechanical properties that were dependent on fiber diameter. Contrary to control PCL fibrous scaffolds that were devoid of bonelike apatite particles, incubating PCL/BG hybrid fibrous scaffolds in simulated body fluid (SBF) revealed bonelike apatite deposition. Osteoblast cells cultured on PCL/BG hybrid fibrous scaffolds spread with multiple attachments and actively proliferated suggesting that the low temperature in situ sol-gel and electrospinning process did not have a detrimental effect. Targeted bone-associated gene expressions by rat calvarial osteoblasts seeded on these hybrid scaffolds demonstrated remarkable spatiotemporal gene activation. Transcriptional-level gene expressions for alkaline phosphatase (ALP), osteopontin (OPN), bone sialoprotein (BSP), and osteocalcin (OCN) were significantly higher on the hybrid fibrous scaffolds (p < 0.001) that were largely dependent on fiber diameter compared. Taken together, our results suggest that PCL/BG fibrous scaffolds may accelerate bone formation by providing a favorable microenvironment.

Plug and play: combining materials and technologies to improve bone regenerative strategies

Despite recent advances in the development of biomaterials intended to replace natural bone grafts for the regeneration of large, clinically relevant defects, most synthetic solutions that are currently applied in the clinic are still inferior to natural bone grafts with regard to regenerative potential and are limited to non-weight-bearing applications. From a materials science perspective, we always face the conundrum of the preservation of bioactivity of calcium phosphate ceramics in spite of better mechanical and handling properties and processability of polymers. Composites have long been investigated as a method to marry these critical properties for the successful regeneration of bone and, indeed, have shown a significant improvement when used in combination with cells or growth factors. However, when looking at this approach from a clinical and regulatory perspective, the use of cells or biologicals prolongs the path of new treatments from the bench to the bedside. Applying 'smart' synthetic materials alone poses the fascinating challenge of instructing tissue regeneration in situ, thereby tremendously facilitating clinical translation. In the journey to make this possible, and with the aim of adding up the advantages of different biomaterials, combinations of fabrication technologies arise as a new strategy for generating instructive three-dimensional (3D) constructs for bone regeneration. Here we provide a review of recent technologies and approaches to create such constructs and give our perspective on how combinations of technologies and materials can help in obtaining more functional bone regeneration.

A novel three-dimensional scaffold for regenerative endodontics: materials and biological characterizations

An electrospun nanocomposite fibrous material holds promise as a scaffold, as well as a drug-delivery device to aid in root maturogenesis and the regeneration of the pulp-dentine complex. A novel three-dimensional (3D) nanocomposite scaffold composed of polydioxanone (PDS II®) and halloysite nanotubes (HNTs) was designed and fabricated by electrospinning. Morphology, structure, mechanical properties and cell compatibility studies were carried out to evaluate the effects of HNTs incorporation (0.5-10 wt% relative to PDS w/w). Overall, a 3D porous network was seen in the different fabricated electrospun scaffolds, regardless of the HNT content. The incorporation of HNTs at 10 wt% led to a significant (p < 0.0001) fibre diameter increase and a reduction in scaffold strength. Moreover, PDS-HNTs scaffolds supported the attachment and proliferation of human-derived pulp fibroblast cells. Quantitative proliferation assay performed with human dental pulp-derived cells as a function of nanotubes concentration indicated that the HNTs exhibit a high level of biocompatibility, rendering them good candidates for the potential encapsulation of distinct bioactive molecules. Collectively, the reported data support the conclusion that PDS-HNTs nanocomposite fibrous structures hold potential in the development of a bioactive scaffold for regenerative endodontics.

Monolithic and assembled polymer-ceramic composites for bone regeneration

The rationale for the use of polymer-ceramic composites for bone regeneration stems from the natural composition of bone, with collagen type I and biological apatite as the main organic and inorganic constituents, respectively. In the present study composite materials of PolyActive™ (PA), a poly(ethylene oxide terephthalate)/poly(butylene terephtalate) co-polymer, and hydroxyapatite (HA) at a weight ratio of 85:15 were prepared by rapid prototyping (RP) using two routes. In the first approach pre-extruded composite filaments of PA-HA were processed using three-dimensional fibre deposition (3DF) (conventional composite scaffolds). In the second approach PA scaffolds were fabricated using 3DF and combined with HA pillars produced inside stereolithographic moulds that fitted inside the pores of the PA three-dimensional structure (assembled composite scaffolds). Analysis of calcium and phosphate release in a simulated physiological solution, not containing calcium or phosphate, revealed significantly higher values for the HA pillars compared with other scaffolds. Release in simulated body fluid saturated with respect to HA did not show significant differences among the different scaffolds. Human mesenchymal stromal cells were cultured on polymer (3DF), conventional composite (3DF-HA) and assembled composite (HA assembled in 3DF) scaffolds and assessed for morphology, metabolic activity, DNA amount and gene expression of osteogenic markers using real time quantitative polymerase chain reaction (PCR). Scanning electron microscopy images showed that the cells attached to and infiltrated all the scaffolds. Assembled composites had a higher metabolic activity compared with 3DF-HA scaffolds while no significant differences were observed in DNA amounts. Gene expression of osteopontin in the assembled composite was significantly higher compared with the conventional composites. The strategy of composite fabrication by assembly appears to be a promising alternative to the conventional composite fabrication route for scaffolds for bone regeneration.

Materiomics: an -omics approach to biomaterials research

The past fifty years have seen a surge in the use of materials for clinical application, but in order to understand and exploit their full potential, the scientific complexity at both sides of the interface--the material on the one hand and the living organism on the other hand--needs to be considered. Technologies such as combinatorial chemistry, recombinant DNA as well as computational multi-scale methods can generate libraries with a very large number of material properties whereas on the other side, the body will respond to them depending on the biological context. Typically, biological systems are investigated using both holistic and reductionist approaches such as whole genome expression profiling, systems biology and high throughput genetic or compound screening, as already seen, for example, in pharmacology and genetics. The field of biomaterials research is only beginning to develop and adopt these approaches, an effort which we refer to as "materiomics". In this review, we describe the current status of the field, and its past and future impact on the biomedical sciences. We outline how materiomics sets the stage for a transformative change in the approach to biomaterials research to enable the design of tailored and functional materials for a variety of properties in fields as diverse as tissue engineering, disease diagnosis and de novo materials design, by combining powerful computational modelling and screening with advanced experimental techniques.

In vivo bone generation via the endochondral pathway on three-dimensional electrospun fibers

A new concept of generating bone tissue via the endochondral route might be superior to the standard intramembranous ossification approach. To implement the endochondral approach, suitable scaffolds are required to provide a three-dimensional (3-D) substrate for cell population and differentiation, and eventually for the generation of osteochondral tissue. Therefore, a novel wet-electrospinning system, using ethanol as the collecting medium, was exploited in this study to fabricate a cotton-like poly(lactic-co-glycolic acid)/poly(ε-caprolactone) scaffold that consisted of a very loose and uncompressed accumulation of fibers. Rat bone marrow cells were seeded on these scaffolds and chondrogenically differentiated in vitro for 4 weeks followed by subcutaneous implantation in vivo for 8 weeks. Cell pellets were used as a control. A glycosaminoglycan assay and Safranin O staining showed that the cells infiltrated throughout the scaffolds and deposited an abundant cartilage matrix after in vitro chondrogenic priming. Histological analysis of the in vivo samples revealed extensive new bone formation through the remodeling of the cartilage template. In conclusion, using the wet-electrospinning method, we are able to create a 3-D scaffold in which bone tissue can be formed via the endochondral pathway. This system can be easily processed for various assays and histological analysis. Consequently, it is more efficient than the traditional cell pellets as a tool to study endochondral bone formation for tissue engineering purposes.

Influence of antimicrobial additives on the formation of rosin nanofibers via electrospinning

In this study, we describe the influence of antimicrobial additives on the formation of rosin fibers by using electrospinning technique. Systematic experiments were performed to fabricate the rosin fibers via electrospinning and we tried to reduce the size of the fibers by mixing some additives such as triethylbenzylammonium chloride (TEBAC), chitosan and silver nitrate in the rosin polymer solution. The morphology, structure and thermal properties of the electrospun rosin fibers were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy and thermogravimetry (TGA). Rosin fibers with a diameter of the order of nanoscale were achieved by the use of TEBAC additive. The antimicrobial activity of the resultant fibers was checked by the antimicrobial disc diffusion test. All the rosin fibers showed excellent antibacterial activity against the gram negative bacteria and feeble activity against the gram positive bacteria. The present study demonstrated that the electrospun rosin fibers can be utilized for potential antimicrobial products.

Preparation and characterization of mesoporous bioactive glass/polycaprolactone nanofibrous matrix for bone tissues engineering

A polycaprolactone (PCL) nanofibrous composite matrix having mesoporous bioactive glass nanoparticles (MBG) was fabricated using the electrospinning method, and the microstructural, physical and biological properties of the composite matrix were characterized. The fiber diameters of PCL, 5 % MBG/PCL (5 M-PCL) and 10 % MBG/PCL (10 M-PCL) were 575 ± 162 nm, 312 ± 134 nm and 321 ± 144 nm, respectively. The bioactivity of the composite matrix was evaluated by soaking the matrix in 1.5× simulated body fluid; the MBG/PCL matrix showed a better biomineralization capability than did the PCL matrix. The biological performance of the PCL and the MBG/PCL were evaluated using an in vitro culture of MG63 osteoblast-like cells. We found that the cell attachment and proliferation rates were significantly higher on the 10 M-PCL than on the PCL. Moreover, the expression of several genes, including ANX-V, type I collagen and OCN, ALP activity, the deposition of calcium, and the BSP protein, were also significantly higher on 10 M-PCL than PCL. These results indicated that MBG/PCL has the ability to support cell attachment, growth, and differentiation and can also yield high bioactivity. Therefore, MBG/PCL could be potentially applied in bone implants.

Incorporation of stromal cell-derived factor-1α in PCL/gelatin electrospun membranes for guided bone regeneration

The goal of this work was to evaluate the effect of membrane functionalization with a chemotactic factor on cell recruitment and bone formation in order to develop a bioactive membrane for guided bone regeneration (GBR) applications. To this end, GBR membranes were prepared by electrospinning using poly(ε-caprolactone) (PCL) blended with type B-gelatin, and functionalized with stromal cell derived factor-1α (SDF-1α) via physical adsorption. Firstly, the obtained membranes were evaluated in vitro for SDF-1α release and chemotactic effect on bone marrow stromal cells (BMSCs). Subsequently, in vivo BMSCs recruitment and bone regeneration in response to SDF-1α loaded PCL/gelatin electrospun membranes were assessed in rat cranial defects. The results showed that PCL/gelatin electrospun membranes provided a diffusion-controlled SDF-1α release profile. Furthermore, the membranes loaded with different amounts of SDF-1α (50-400 ng) significantly induced stimulated chemotactic migration of BMSCs in vitro without dose-dependent effects. Eight weeks after implantation in rat cranial defects, SDF-1α loaded membranes yielded a 6-fold increase in the amount of bone formation compared to the bare membranes, albeit that contribution of in vivo BMSCs recruitment to the bone regeneration could not be ascertained. In conclusion, the results of current study indicate the potential for using SDF-1α loaded PCL/gelatin electrospun membrane as a bioactive membrane, which is beneficial for optimizing clinical application of GBR strategies.