Membrane-based lateral flow immunochromatographic strip with nanoparticles as reporters for detection: A review

Tailoring noble metal nanoparticle designs to enable sensitive lateral flow immunoassay

Lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters is a popular point-of-care diagnostic technique. However, given the weak absorbance of traditional 20-40 nm spherical AuNPs, their sensitivity is low, which greatly limits the wide application of AuNP-based LFIA. With the rapid advances in materials science and nanotechnology, the synthesis of noble metal nanoparticles (NMNPs) has enhanced physicochemical properties such as optical, plasmonic, catalytic, and multifunctional activity by simply engineering their physical parameters, including the size, shape, composition, and external structure. Using these engineered NMNPs as an alternative to traditional AuNPs, the sensitivity of LFIA has been significantly improved, thereby greatly expanding the working range and application scenarios of LFIA, particularly in trace analysis. Therefore, in this review, we will focus on the design of engineered NMNPs and their demonstration in improving LFIA. We highlight the strategies available for tailoring NMNP designs, the effect of NMNP engineering on their performance, and the working principle of each engineering design for enhancing LFIA. Finally, current challenges and future improvements in this field are briefly discussed.

Preparation of a broad-specific monoclonal antibody and development of an immunochromatographic assay for monitoring of anthranilic diamides in vegetables and fruits

A mAb-based lateral flow immunochromatographic strip for the detection of anthranilic diamides in vegetables and fruits was developed. The strip provided cut-off values of 2.5, 5, 10, and 10 ng g−1 for CHL, CYA, CYC, and TEA, respectively.

Quantum dots' size matters for balancing their quantity and quality in label materials to improve lateral flow immunoassay performance for C-reactive protein determination

Incorporating quantum dots (QDs) into dendritic mesoporous silica nanoparticles (DMSNs) for signal amplification of label materials represents an efficient strategy to improve the performance of lateral flow immunoassays (LFIAs). In this work, it is found that the CdSe/ZnS QD's size matters for balancing their loading amount and quantum yields (QYs) in the DMSNs-QDs based label materials and ultimately determining the performance of LFIA. The impacts of three CdSe/ZnS QDs with diameters of 9.1, 10.5 and 11.7 nm on CdSe/ZnS QDs incorporation and LFIA applications are studied. The increase of CdSe/ZnS QDs size from 9.1 to 11.7 nm results in a decrease in CdSe/ZnS QDs loading amount and an increase in QYs of incorporated CdSe/ZnS QDs. This trade-off leads to an optimized CdSe/ZnS QDs size of 10.5 nm, which exhibits the best LFIA performance due to the balanced QDs loading (2.26 g g^-1) and QY (57.1%). The 10.5 nm CdSe/ZnS QDs incorporated DMSNs-QDs for C-reactive protein (CRP) detection achieved a limit of detection of 5 pg mL^-1 (equivalent to 4.2 × 10^-14 M) with naked eye, which is lower than literature reports and commercial LFIA products. This study demonstrates that the CdSe/ZnS QD's size matters for improving the quality of DMSNs-QDs and their LFIA performance for CRP determination, providing new insights into the rational design of advanced label materials for improving LFIA performance.

Recent advances in intelligent food packaging materials: Principles, preparation and applications

Traditionally, food packaging is used for improving food quality and providing consumers with descriptions of products. A new generation of intelligent ("smart") packaging materials is being developed to continuously monitor the properties of packaged foods and provide real-time information about their maturity, quality, and safety. In this paper, recent research in the development, properties, and applications of intelligent food packaging materials is summarized. Initially, we review the different sensing methods that can be used to detect alterations in food properties, such as those based on changes in time, temperature, humidity, oxygen levels, pH, chemical composition, or microbial contamination. The different approaches that can be used to design intelligent packaging materials are then highlighted, including films, bar codes, and labels. A number of applications of these packaging materials are then discussed to demonstrate their potential in the food industry. Finally, the challenges and future directions of food packaging are discussed.

SERS-based lateral flow immunoassay for sensitive and simultaneous detection of anti-SARS-CoV-2 IgM and IgG antibodies by using gap-enhanced Raman nanotags

The lateral flow immunoassay (LFIA) has played a crucial role in early diagnosis during the current COVID-19 pandemic owing to its simplicity, speed and affordability for coronavirus antibody detection. However, the sensitivity of the commercially available LFIAs needs to be improved to better prevent the spread of the infection. Here, we developed an ultra-sensitive surface-enhanced Raman scattering-based lateral flow immunoassay (SERS-based LFIA) strip for simultaneous detection of anti-SARS-CoV-2 IgM and IgG by using gap-enhanced Raman nanotags (GERTs). The GERTs with a 1 nm gap between the core and shell were used to produce the "hot spots", which provided about 30-fold enhancement as compared to conventional nanotags. The COVID-19 recombinant antigens were conjugated on GERTs surfaces and replaced the traditional colloidal gold for the Raman sensitive detection of human IgM and IgG. The LODs of IgM and IgG were found to be 1 ng/mL and 0.1 ng/mL (about 100 times decrease was observed as compared to commercially available LFIA strips), respectively. Moreover, under the condition of common nano-surface antigen, precise SERS signals proved the unreliability of quantitation because of the interference effect of IgM on IgG.

Point-of-care COVID-19 diagnostics powered by lateral flow assay

Since its first discovery in December 2019, the global coronavirus disease 2019 (COVID-19) pandemic caused by the novel coronavirus (SARS-CoV-2) has been posing a serious threat to human life and health. Diagnostic testing is critical for the control and management of the COVID-19 pandemic. In particular, diagnostic testing at the point of care (POC) has been widely accepted as part of the post restriction COVID-19 control strategy. Lateral flow assay (LFA) is a popular POC diagnostic platform that plays an important role in controlling the COVID-19 pandemic in industrialized countries and resource-limited settings. Numerous pioneering studies on the design and development of diverse LFA-based diagnostic technologies for the rapid diagnosis of COVID-19 have been done and reported by researchers. Hundreds of LFA-based diagnostic prototypes have sprung up, some of which have been developed into commercial test kits for the rapid diagnosis of COVID-19. In this review, we summarize the crucial role of rapid diagnostic tests using LFA in targeting SARS-CoV-2-specific RNA, antibodies, antigens, and whole virus. Then, we discuss the design principle and working mechanisms of these available LFA methods, emphasizing their clinical diagnostic efficiency. Ultimately, we elaborate the challenges of current LFA diagnostics for COVID-19 and highlight the need for continuous improvement in rapid diagnostic tests.

Paper-Based Point-of-Care Testing of SARS-CoV-2

The COVID-19 pandemic has resulted in significant global social and economic disruption. The highly transmissive nature of the disease makes rapid and reliable detection critically important. Point-of-care (POC) tests involve performing diagnostic tests outside of a laboratory that produce a rapid and reliable result. It therefore allows the diagnostics of diseases at or near the patient site. Paper-based POC tests have been gaining interest in recent years as they allow rapid, low-cost detection without the need for external instruments. In this review, we focus on the development of paper-based POC devices for the detection of SARS-CoV-2. The review first introduces the principles of detection methods that are available to paper-based devices. It then summarizes the state-of-the-art paper devices and their analytical performances. The advantages and drawbacks among methods are also discussed. Finally, limitations of the existing devices are discussed, and prospects are given with the hope to identify research opportunities and directions in the field. We hope this review will be helpful for researchers to develop a clinically useful and economically efficient paper-based platform that can be used for rapid, accurate on-site diagnosis to aid in identifying acute infections and eventually contain the COVID-19 pandemic.

The Potential Use of Isothermal Amplification Assays for In-Field Diagnostics of Plant Pathogens

Rapid, sensitive, and timely diagnostics are essential for protecting plants from pathogens. Commonly, PCR techniques are used in laboratories for highly sensitive detection of DNA/RNA from viral, viroid, bacterial, and fungal pathogens of plants. However, using PCR-based methods for in-field diagnostics is a challenge and sometimes nearly impossible. With the advent of isothermal amplification methods, which provide amplification of nucleic acids at a certain temperature and do not require thermocyclic equipment, going beyond the laboratory has become a reality for molecular diagnostics. The amplification stage ceases to be limited by time and instruments. Challenges to solve involve finding suitable approaches for rapid and user-friendly plant preparation and detection of amplicons after amplification. Here, we summarize approaches for in-field diagnostics of phytopathogens based on different types of isothermal amplification and discuss their advantages and disadvantages. In this review, we consider a combination of isothermal amplification methods with extraction and detection methods compatible with in-field phytodiagnostics. Molecular diagnostics in out-of-lab conditions are of particular importance for protecting against viral, bacterial, and fungal phytopathogens in order to quickly prevent and control the spread of disease. We believe that the development of rapid, sensitive, and equipment-free nucleic acid detection methods is the future of phytodiagnostics, and its benefits are already visible.

Rapid Monitoring of Vancomycin Concentration in Serum Using Europium (III) Chelate Nanoparticle-Based Lateral Flow Immunoassay

Establishing personalized medication plans for patients to maximize therapeutic efficacy and minimize the toxicity of vancomycin (VAN) requires rapid, simple, and accurate monitoring of VAN concentration in body fluid. In this study, we have developed a simple and rapid analytical method by integrating Eu (III) chelate nanoparticles (CN-EUs) and lateral flow immunoassay (LFIA) to achieve the real-time monitoring of VAN concentration in serum within 15 min. This approach was performed on nitrocellulose (NC) membrane assembled LFIA strips via indirect competitive immunoassay and exhibited a wide linear range of detection (0.1–80 μg*ml⁻¹) with a low limit of detection (69.2 ng*ml⁻¹). The coefficients of variation (CV) of the intra- and inter-assay in the detection of VAN were 7.12–8.53% and 8.46–11.82%, respectively. The dilution test and specificity indicated this method had a stability that was not affected by the serum matrix and some other antibiotics. Furthermore, the applicability of the proposed method was assessed by comparing the determined results with those measured by LC-MS/MS, showing a satisfactory correlation (R² = 0.9713). The proposed CN-EUs-based LFIA manifested promising analytical performance, which showed potential value in the real-time monitoring of VAN and could help optimize the clinical use of more antibiotics.

Electrostatic-triggered exothermic antibody adsorption to the cellulose nanoparticles

Antibody-conjugated nanoparticles are used in a fields ranging from medicine to engineering. NanoAct® nanobeads are cellulose nanoparticles used in lateral flow assays that are highly water dispersible. In order to promote the adsorption of antibodies onto NanoAct® particles while maintaining their activity, we analyzed the adsorption onto NanoAct® particles thermodynamically and elucidated the adsorption mechanism. In an immunochromatographic assay, the amount of adsorbed antibody and the color intensity of the test line increased as the pH decreased. The zeta potential of the nanoparticles remained constant at around -30 mV over the pH range from 2 to 10. The model antibody had pI values between 6.2 and 6.8. Isothermal calorimetry analysis showed that adsorption of antibody to the NanoAct® particle is an endothermic reaction under low pH conditions, an exothermic reaction between pH 6 and pH 7, and a weakly exothermic reaction above pH 7. These data indicate that the changes in net charge of the antibody surface as a function of pH influence the pH dependence of antibody adsorption to the negatively charged NanoAct®. This suggests that increased positive charge on the antibody surface will result in a more sensitive NanoAct®-based immunoassay.

Colorimetric immunosensor based on glassy carbon microspheres test strips for the detection of prostate-specific antigen

Micro-sized glassy carbon microspheres (GCMs, typically 3 μm in diameter) instead of nano-sized gold nanoparticles (AuNPs, typically 20 nm in diameter) were for the first time used as signal markers for the quantitative detection of antigen such as prostate-specific antigen (PSA). After being treated with concentrated HNO3, GCMs bear carboxyl groups at their surfaces, which enables antibodies to be conjugated with GCMs to yield new type of micro-sized material-based colorimetric probes used for immunochromatographic test strips (ICTSs). The captured black GCMs (with strong and wide-band light absorption) on the T-line of ICTS were used both for qualitative and quantitative determination of PSA. In the case of quantitative determination, a lab-assembled optical strip reader system was used to measure the reflected LED light intensity at 550 nm. The sensing performances of the developed GCM-based ICTSs, such as sensitivity, selectivity, reproducibility, stability, and applicability, were investigated in detail. The developed GCM-based ICTSs can have much higher (3 times) detection sensitivity than AuNP-based ICTSs, showing promising applications in sensitive immunoassay.

Rapid detection of human heart-type fatty acid-binding protein in human plasma and blood using a colloidal gold-based lateral flow immunoassay

The incidence of acute myocardial infarction (AMI) is currently increasing. Early detection is important for the treatment and prognosis of patients with AMI. Heart-type fatty acid-binding protein (H-FABP) may be used as an early marker of AMI due to its high sensitivity, specificity and prognostic value. Therefore, in the present study, H-FABP was used as a biomarker in a double-antibody sandwich method and colloidal gold-based lateral flow immunoassay to develop a rapid detection kit for H-FABP with a processing time of only 5 min. The sensitivity of the kit in plasma and whole blood was 1 ng/ml and this method had good specificity, exhibiting no cross-reaction with cardiac troponin I, myoglobin or creatine kinase-Mb. The kits had good shelf life and stability, as they were able to be stored at 40˚C for 30 days. A total of 12 clinical samples were collected for detection and the coincidence rate with the ELISA method was up to 91.67%. Therefore, the present study provided a simple, rapid and economical early-detection in-home testing kit.

Luminescent lanthanide nanoparticle-based imaging enables ultra-sensitive, quantitative and multiplexed in vitro lateral flow immunoassays

Lateral Flow Assays (LFAs) have been extensively used on-site to rapidly detect analytes, possibly in complex media. However, standard gold nanoparticle-based LFAs lack sensitivity and cannot provide quantitative measurements with high accuracy. To overcome these limitations, we image lanthanide-doped nanoparticles (YVO₄:Eu 40%) as new luminescent LFA probes, using a homemade reader coupled to a smartphone and propose an original image analysis allowing strip quantification regardless of the shape of the test band signal. This method is demonstrated for the detection of staphylococcal enterotoxins SEA, SEG, SEH, and SEI. A systematic comparison to state-of-the-art gold nanoparticle-based LFA revealed an analytical sensitivity enhancement of at least one order of magnitude. We furthermore provided measurements of absolute toxin concentration over two orders of magnitude and demonstrated simultaneous quantitative detection of multiple toxins with unaltered sensitivity. In particular, we reached concentrations 100 times lower than the ones reported in the literature for on-site multiplexed LFA targeting enterotoxins. Altogether, these results highlight that our luminescent nanoparticle-based method provides a powerful and versatile on-site framework to detect multiple biomolecules with sensitivity approaching that obtained by ELISA. This paves the way to a change of paradigm in the field of analytical immunoassays by providing fast in situ quantitative high sensitivity detection of biomarkers or pathogens.

Ultra-sensitive and high efficiency detection of multiple non-small cell lung cancer-related miRNAs on a single test line in catalytic hairpin assembly-based SERS-LFA strip

Accurate quantification of multiple miRNAs biomarkers in body fluid is still a challenge for early screening of cancer. Herein, by catalytic hairpin assembly as a signal amplification strategy, we designed a novel surface-enhanced Raman scattering (SERS)-lateral flow assay (LFA) strip for ultrasensitive detection of miR-21 and miR-196a-5p in non-small cell lung cancer (NSCLC) urine on a single test (T) line. 4-mercaptobenzoic acid or 5,5'-dithiobis-2-nitrobenzoic acid as Raman molecules was labeled and two hairpin DNA sequence was modified gold nanocages (GNCs) were designed as two SERS tags. Through target miRNA-triggered catalytic hairpin assembly (CHA), the double-stranded DNAs (H1-H2 complex) formed by SERS tags and the related hairpin-structured DNA sequence 2 (H2) were immobilized on a single T line of SERS-LFA strip. This generated abundant "hot spots" because of the formation of numerous H1-H2 complex thus facilitated the SERS measurement. Through this method, two kinds of miRNAs were analyzed, resulting in limits of detection of 2.08 pM and 3.31 pM for miR-21 in PBS buffer and human urine, 1.77 pM and 2.18 pM for miR-196a-5p in PBS buffer and human urine. Significantly, the SERS-LFA strip exhibited high specificity and good repeatability toward miRNAs. The whole detection time was only 30 min, which means that the high detection efficiency of the strip. The clinical feasibility of the proposed method was also evaluated by detecting the levels of miR-21 and miR-196a-5p in urine samples from NSCLC patients and healthy subjects. The developed SERS-LFA strip has wide application prospect in biomedical research, drug development and early clinical diagnosis.

Evaluation of the INDICAID COVID-19 Rapid Antigen Test in Symptomatic Populations and Asymptomatic Community Testing

As the COVID-19 pandemic progresses, there is an increasing need for rapid, accessible assays for SARS-CoV-2 detection. We present a clinical evaluation and real-world implementation of the INDICAID COVID-19 rapid antigen test (INDICAID rapid test). A multisite clinical evaluation of the INDICAID rapid test using prospectively collected nasal (bilateral anterior) swab samples from symptomatic subjects was performed. The INDICAID rapid test demonstrated a positive percent agreement (PPA) and negative percent agreement (NPA) of 85.3% (95% confidence interval [95% CI], 75.6% to 91.6%) and 94.9% (95% CI, 91.6% to 96.9%), respectively, compared to laboratory-based reverse transcriptase PCR (RT-PCR) using nasal specimens. The INDICAID rapid test was then implemented at COVID-19 outbreak screening centers in Hong Kong as part of a testing algorithm (termed "dual-track") to screen asymptomatic individuals for prioritization for confirmatory RT-PCR testing. In one approach, preliminary positive INDICAID rapid test results triggered expedited processing for laboratory-based RT-PCR, reducing the average time to confirmatory result from 10.85 h to 7.0 h. In a second approach, preliminary positive results triggered subsequent testing with an onsite rapid RT-PCR, reducing the average time to confirmatory result to 0.84 h. In 22,994 asymptomatic patients, the INDICAID rapid test demonstrated a PPA of 84.2% (95% CI, 69.6% to 92.6%) and an NPA of 99.9% (95% CI, 99.9% to 100%) compared to laboratory-based RT-PCR using combined nasal/oropharyngeal specimens. The INDICAID rapid test has excellent performance compared to laboratory-based RT-PCR testing and, when used in tandem with RT-PCR, reduces the time to confirmatory positive result. IMPORTANCE Laboratory-based RT-PCR, the current gold standard for COVID-19 testing, can require a turnaround time of 24 to 48 h from sample collection to result. The delayed time to result limits the effectiveness of centralized RT-PCR testing to reduce transmission and stem potential outbreaks. To address this, we conducted a thorough evaluation of the INDICAID COVID-19 rapid antigen test, a 20-minute rapid antigen test, in both symptomatic and asymptomatic populations. The INDICAID rapid test demonstrated high sensitivity and specificity with RT-PCR as the comparator method. A dual-track testing algorithm was also evaluated utilizing the INDICAID rapid test to screen for preliminary positive patients, whose samples were then prioritized for RT-PCR testing. The dual-track method demonstrated significant improvements in expediting the reporting of positive RT-PCR test results compared to standard RT-PCR testing without prioritization, offering an improved strategy for community testing and controlling SARS-CoV-2 outbreaks.

Advances in point-of-care testing for cardiovascular diseases

Point-of-care testing (POCT) is a specific format of diagnostic testing that is conducted without accompanying infrastructure or sophisticated instrumentation. Traditionally, such rapid sample-to-answer assays provide inferior analytical performances to their laboratory counterparts when measuring cardiac biomarkers. Hence, their potentially broad applicability is somewhat bound by their inability to detect clinically relevant concentrations of cardiac troponin (cTn) in the early stages of myocardial injury. However, the continuous refinement of biorecognition elements, the optimization of detection techniques, and the fabrication of tailored fluid handling systems to manage the sensing process has stimulated the production of commercial assays that can support accelerated diagnostic pathways. This review will present the latest commercial POC assays and examine their impact on clinical decision-making. The individual elements that constitute POC assays will be explored, with an emphasis on aspects that contribute to economically feasible and highly sensitive assays. Furthermore, the prospect of POCT imparting a greater influence on early interventions for medium to high-risk individuals and the potential to re-shape the paradigm of cardiovascular risk assessments will be discussed.

A Review on Biosensors and Nanosensors Application in Agroecosystems

Previous decades have witnessed a lot of challenges that have provoked a dire need of ensuring global food security. The process of augmenting food production has made the agricultural ecosystems to face a lot of challenges like the persistence of residual particles of different pesticides, accretion of heavy metals, and contamination with toxic elemental particles which have negatively influenced the agricultural environment. The entry of such toxic elements into the human body via agricultural products engenders numerous health effects such as nerve and bone marrow disorders, metabolic disorders, infertility, disruption of biological functions at the cellular level, and respiratory and immunological diseases. The exigency for monitoring the agroecosystems can be appreciated by contemplating the reported 220,000 annual deaths due to toxic effects of residual pesticidal particles. The present practices employed for monitoring agroecosystems rely on techniques like gas chromatography, high-performance liquid chromatography, mass spectroscopy, etc. which have multiple constraints, being expensive, tedious with cumbersome protocol, demanding sophisticated appliances along with skilled personnel. The past couple of decades have witnessed a great expansion of the science of nanotechnology and this development has largely facilitated the development of modest, quick, and economically viable bio and nanosensors for detecting different entities contaminating the natural agroecosystems with an advantage of being innocuous to human health. The growth of nanotechnology has offered rapid development of bio and nanosensors for the detection of several composites which range from several metal ions, proteins, pesticides, to the detection of complete microorganisms. Therefore, the present review focuses on different bio and nanosensors employed for monitoring agricultural ecosystems and also trying to highlight the factor affecting their implementation from proof-of-concept to the commercialization stage.

Rapid Detection of Anti-SARS-CoV-2 Antibody Using a Selenium Nanoparticle-Based Lateral Flow Immunoassay

Coronavirus disease 2019 is an infectious disease caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). SARS-CoV-2 is highly transmissible. Early and rapid testing is necessary to effectively prevent and control the outbreak. Detection of SARS-CoV-2 antibodies with lateral flow immunoassay can achieve this goal. In this study, SARS-CoV-2 nucleoprotein (NP) was expressed and purified. We used the selenium nanoparticle as the labeling probe coupled with the NP to prepare an antibody (IgM and IgG) detection kit. The detection limit, cross reaction, sensitivity and specificity of the kit is verified. Separate detection of IgM and IgG, such as in this assay, was performed in order to reduce mutual interference and improve the accuracy of the test results.The final purity of NP was 91.83%. Selenium nanoparticle and NP successfully combined with stable effect. The LOD of the kit was 20 ng/mL for anti-NP IgG and 60 ng/mL for anti-NP IgM, respectively. The kit does not cross reaction with RF. The sensitivity of the kit was 94.74% and the specificity was 96.23%. The assay kit does not require any special device for reading the results and the readout is a simple color change that can be evaluated with the naked eye. This kit is suitable for rapid and real-time detection of the SARS-CoV-2 antibody IgG and IgM.

Aptamer-based lateral flow assay on-site biosensors

The lateral flow assay (LFA) is a widely used paper-based on-site biosensor that can detect target analytes and obtain test results in several minutes. Generally, antibodies are utilized as the biorecognition molecules in the LFA. However, antibodies selected using an in vivo process not only may risk killing the animal hosts and causing errors between different batches but also their range is restricted by the refrigerated conditions used to store them. To avoid these limitations, aptamers screened by an in vitro process have been studied as biorecognition molecules in LFAs. Based on the sandwich or competitive format, the aptamer-based LFA can accomplish on-site detection of target analytes. Since aptamers have a distinctive ability to undergo conformational changes, the adsorption-desorption format has also been exploited to detect target analytes in aptamer-based LFAs. This paper reviews developments in aptamer-based LFAs in the last three years for the detection of target analytes. Three formats of aptamer-based LFAs, i.e., sandwich, competitive, and adsorption-desorption, are described in detail. Based on these formats, signal amplification strategies and multiplexed detection are discussed in order to provide an overview of aptamer-based LFAs for on-site detection of target analytes. In addition, the potential commercialization and future perspectives of aptamer-based LFAs for rapid detection of SARS-CoV-2 are given to support the COVID-19 pandemic.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Review on Recent Progress in Magnetic Nanoparticles: Synthesis, Characterization, and Diverse Applications

Diverse applications of nanoparticles (NPs) have revolutionized various sectors in society. In the recent decade, particularly magnetic nanoparticles (MNPs) have gained enormous interest owing to their applications in specialized areas such as medicine, cancer theranostics, biosensing, catalysis, agriculture, and the environment. Controlled surface engineering for the design of multi-functional MNPs is vital for achieving desired application. The MNPs have demonstrated great efficacy as thermoelectric materials, imaging agents, drug delivery vehicles, and biosensors. In the present review, first we have briefly discussed main synthetic methods of MNPs, followed by their characterizations and composition. Then we have discussed the potential applications of MNPs in different with representative examples. At the end, we gave an overview on the current challenges and future prospects of MNPs. This comprehensive review not only provides the mechanistic insight into the synthesis, functionalization, and application of MNPs but also outlines the limits and potential prospects.

Red Zn2SiO4:Eu3+ and Mg2TiO4:Mn4+ nanophosphors for on-site rapid optical detections: Synthesis and characterization

This study reports the synthesis and characterization of the red nanophosphors Zn₂SiO₄:Eu³⁺ (ZSO:Eu³⁺) and Mg₂TiO₄:Mn⁴⁺ (MTO:Mn⁴⁺). The use of phosphors as a fluorescence label for lateral flow immunochromatographic assay (LFIA) has also been described. The optimal photoluminescence (PL) for ZSO:Eu³⁺ was obtained when it was synthesized with 7 mol% of Eu³⁺ and annealed at 1100 °C for 1 h. Long fluorescence lifetime (1.01 ms), high activation energy E a (0.28 eV), and low PL degeneration (10% at 110 °C) are the characteristics of ZSO:Eu³⁺. MTO:Mn⁴⁺ also exhibited high PL intensity along with a high E _a of 0.32 eV. The emission wavelengths of phosphors are biocompatible with the optical bio-window of tissues. When human immunoglobulin G (human IgG) at a constant concentration of 100 μg/mL was used for detection, the PL ratios of the test line to the control line were 2.15 and 2.28 for the ZSO:Eu³⁺- and MTO:Mn⁴⁺-labeled LFIA, respectively. Thus, the ZSO:Eu³⁺ and MTO:Mn⁴⁺ nanophosphors are capable of human IgG recognition and are the promising candidates as fluorescent labels for on-site rapid optical biodetection.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s00339-021-04733-0.

Production of highly sensitive monoclonal antibody and development of lateral flow assays for phallotoxin detection in urine

Phallotoxins, toxic cyclopeptides found in wild poisonous mushrooms, are predominant causes of fatal food poisoning. For the early and rapid diagnosis mushroom toxin poisoning, a highly sensitive and robust monoclonal antibody (mAb) against phallotoxins was produced for the first time. The half-maximum inhibition concentration (IC₅₀) values of the mAb-based indirect competitive ELISAs for phallacidin (PCD) and phalloidin (PHD) detection were 0.31 ng mL^-1 and 0.35 ng mL^-1, respectively. In response to the demand for rapid screening of the type of poisoning and accurate determination of the severity of poisoning, colloidal gold nanoparticle (GNP) and time-resolved fluorescent nanosphere (TRFN) based lateral flow assays (LFA) were developed. The GNP-LFA has a visual cut-off value of 3.0 ng mL^-1 for phallotoxins in human urine sample. The TRFN-LFA provides a quantitative readout signal with detection limit of 0.1 ng mL^-1 in human urine sample. In this study, urine samples without pretreatment were used directly for the LFA strip tests, and both two LFAs were able to accomplish analysis within 10 min. The results demonstrated that LFAs based on the newly produced, highly sensitive, and robust mAb were able to be used for both rapid qualitative screening of the type of poisoning and accurate quantitative determination of the severity of poisoning after accidental ingestion by patients of toxic mushrooms.

Development of a fluorescent immunochromatographic assay based on quantum dots for the detection of fleroxacin

Fleroxacin (FLE) is a broad-spectrum fluoroquinolone antibiotic widely used in animal husbandry, veterinary medicine and aquaculture. Eating animal-derived foods with FLE residues can cause allergies, poisoning or drug resistance. The water-soluble QDs (CdSe/ZnS) and anti-FLE monoclonal antibody (mAb) were used to prepare a fluorescent probe by the method of N-(3-dimethylaminopropyl)-N'-ethylcarbodimide hydrochloride (EDC) activation. The fluorescent probe was characterized by dynamic light scattering (DLS). The better bioactivity and stability of the fluorescent probe was obtained under the pH value of 8.0, the molecule molar ratio of EDC (1 : 2000) and anti-FLE monoclonal antibodies (1 : 10). The control line (C line) and test line (T line) of a nitrocellulose (NC) filter membrane were sprayed with SPA (0.05 mg mL-1) and FLE-OVA (1.4 mg mL-1) solutions with optimal concentration, respectively. A novel method of fluorescent immunochromatographic assay based on quantum dots (QDs-ICA) in this work exhibited good accuracy, reproductivity and excellent specificity under the optimal experimental conditions. Compared with the traditional method for the visual detection of FLE, the developed QDs-ICA can successfully determine FLE residues in pork meat with a better cut-off value of 2.5 ng mL-1. The QDs-ICA could be adapted for the rapid preliminary detection of FLE residues in pork meat for the first time.

In situ Raman enhancement strategy for highly sensitive and quantitative lateral flow assay

As a paper-based analytical platform, lateral flow assay (LFA) gets benefit from the rapid analysis, low cost, high selectivity, good stability, and user-friendliness, and thus has been widely used in rapid screening or assisted diagnosis. Nevertheless, LFA still suffers from low detection sensitivity via the naked eye, limiting its applications to qualitative and semi-quantitative tests. To enhance the signal readout, various nanoparticle signal tags have been employed to replace traditional colloidal gold nanoparticles (AuNPs), such as fluorescent nanoparticles (FNPs), magnetic nanoparticles (MNPs), and Raman reporter-labeled nanoparticles. In particular, Raman reporter-labeled nanoparticles are extremely sensitive due to remarkable signal enhancement effect on metal surface. However, the application of LFA is still hampered by the poor stability of Raman reporter-labeled nanoparticles. Herein, we developed an in situ Raman enhancement strategy to create a surface-enhanced Raman scattering (SERS) signal on the AuNPs, shortened as "i-SERS," which not only preserves the original advantages of the colloidal gold strip (AuNPs-LFA), but also realizes highly sensitive and quantitative detection. We applied the i-SERS for procalcitonin (PCT) detection. The experimental process takes only 16 min, and the limit of detection (LOD) is 0.03 ng mL^-1, far below the value using AuNPs-LFA. These results indicate that i-SERS assay was highly sensitive and suitable for the rapid detection of PCT.

Compact Magneto-Fluorescent Colloids by Hierarchical Assembly of Dual-Components in Radial Channels for Sensitive Point-of-Care Immunoassay

Exploring signal amplification strategies to enhance the sensitivity of lateral flow immunoassay (LFIA) is of great significance for point-of-care (POC) testing of low-concentrated targets in the field of in vitro diagnostics. Here, a highly-sensitive LFIA platform using compact and hierarchical magneto-fluorescent assemblies as both target-enrichment substrates and optical sensing labels is demonstrated. The large-pored dendritic templates are utilized for high-density incorporation of both superparamagnetic iron oxide nanoparticles (IOs) and quantum dots (QDs) within the vertical channels. The hierarchical structure is built via affinity-driven assembly of IOs and QDs from organic phase with silica surface and mercapto-organosilica intermediate layer, respectively. The sequential assembly with central-radial channels enables 3D loading of dual components and separately controlling of discrete functionalities. After the alkyl-organosilica encapsulation and silica sealing, the composite spheres exhibit high stabilities and compatibility with LFIA for procalcitonin (PCT) detection. With the assistance of liquid-phase antigen-capturing, magnetic enrichment, and fluorescence-signal amplification, a limit of detection of 0.031 ng mL^-1 for PCT is achieved with a linear range from 0.012 to 10 ng mL^-1 . The current LFIA is robust and validated for PCT detection in real serum, which holds great diagnostic significance for precise guidance of antibiotic therapy with POC manner.

Strip modification and alternative architectures for signal amplification in nanoparticle-based lateral flow assays

Nanoparticle (NP)-based lateral flow assay (LFA) technology has outstanding characteristics that make it ideal for point-of-care bioanalytical applications. However, LFAs still have important limitations, especially related to sensitivity, which is in general worse than that of other well-established bioassays such as ELISA or PCR. Many efforts have been made for enhancing the sensitivity of LFAs, mainly actuating on the nanoparticle labels and on alternative optical detection modes. However, strip pads modification for such a purpose is an incipient vast field of research. This article gives a brief overview on the recent advances proposed for signal amplification actuating on different pads and the general architecture of the LFA strips. Such strategies offer universal tools that can be adapted to any LFA, independently of the kind of sample, analyte, and label. The principles of the different strategies developed to achieve novel signal amplification and sensitive detection are discussed, and some examples of relevant approaches are highlighted, together with future prospects and challenges.

Pre-clinically evaluated visual lateral flow platform using influenza A and B nucleoprotein as a model and its potential applications

A visual colorimetric rapid screening system based on a lateral flow device for simultaneous detection and differentiation between influenza A and B nucleoprotein as a model was developed. Monoclonal antibodies, specific for either influenza A or B nucleoproteins, were evaluated for their reactivities and were used as targeting ligands. With the best antibody pairs selected, the system exhibited good specificity to both viruses without cross reactivity to other closely related respiratory viruses. Further semi-quantitative analysis using a strip reader revealed that the system is capable of detecting influenza A and B protein content as low as 0.04 and 1 ng per test, respectively, using a sample volume as low as 100 μL, within 10 minutes (R² = 0.9652 and 0.9718). With a performance comparison to the commercial tests, the system demonstrated a four-to-eight-fold higher sensitivity. Pre-clinical evaluation with 101 nasopharyngeal swabs reveals correlated results with a standard molecular approach, with 89% and 83% sensitivity towards influenza A and B viruses, and 100% specificity for both viruses.

Visual colorimetric rapid screening system based on lateral flow device for influenza A and B virus detection as a model and its pre-clinical evaluation.

Visual-afterglow dual-mode immunochromatographic strip for 17β-estradiol detection in milk

The continuous intake of 17β-estradiol (E2) residue from animal-derived food may pose a threat to the health of consumers, so the rapid screen and detection of E2 is very necessary. Although visual immunochromatographic strip (ICS) has played a great role in food safety control such as the screen of many food contaminants, it cannot meet the requirements for E2 detection due to the insufficient sensitivity of traditional visual ICS and the low concentration range of estrogen in food. Here, we developed a dual-mode ICS strategy to achieve rapid and highly sensitive detection of E2. Based on the visual detection mode of a competitive ICS, the afterglow detection mode working in fluorescence resonance energy transfer mechanism was introduced by using the afterglow particles (APs) as energy donor and gold nanoparticles (AuNPs) as energy acceptor. In this method, large APs of micron size with superior afterglow were applied as the test zone-fixed fluorescence signal source, thus the contradiction between migration and afterglow characteristics was skillfully resolved. In addition, a 6 W UV lamp was used as the light source to excite APs, and a smartphone was used to capture an image of 0.5 s after the UV light was turned off to effectively remove the autofluorescence from the strips and improve the signal-to-noise ratio. The limit of detection of this afterglow mode was 0.5 ng/mL, twenty times more sensitive than that of visual mode (10 ng/mL). The strategy has been successfully applied to the detection of estradiol in milk and verified by HPLC-FLD.

Sensitive lateral flow immunoassay for the detection of pork additives in raw and cooked meat products

In this study, we developed a lateral flow immunoassay (LFIA) for the detection of pork additives in meat products. LFIA of porcine immunoglobulins (IgG) as a molecular biomarker was carried out in a sandwich format for species identification. Gold nanoparticles as a nano-dispersed label were conjugated to secondary antibodies specific to anti-porcine IgG. The test system was characterized by high specificity, which was confirmed by the absence of cross-reactivity with any other species tested. A short technique of sample preparation was proposed aimed at the effective extraction of IgG from meat samples. The developed LFIA enabled the detection of a pork ingredient at a level as low as 0.063% (w/w) in raw meat within 35 min including sample preparation. A large panel of real meat samples was analyzed by the LFIA. The results showed that porcine IgG can be reliably recognized both in raw meat products and processed meat foodstuffs.

The Role of Dendritic Mesoporous Silica Nanoparticles' Size for Quantum Dots Enrichment and Lateral Flow Immunoassay Performance

Using dendritic mesoporous silica nanoparticles (DMSNs) for quantum dots (QDs) enrichment and signal amplification is an emerging strategy for improving the detection sensitivity of lateral flow immunoassay (LFIA). In this study, a new and convenient approach is developed to prepare water-dispersible DMSNs-QDs. A series of DMSNs with various diameters (138, 251, 368, and 471 nm) are studied for loading QDs and LFIA applications. The resultant water-dispersible DMSNs-QDs exhibit a high fluorescence retention of 81.8%. The increase in particle size from 138 to 471 nm results in an increase in loading capacity of QDs and a decrease in binding quantity of the DMSNs-QDs in the test line of LFIA. This trade-off leads to an optimal DMSNs-QDs size of 368 nm with a limit of detection reaching 10 pg mL^-1 (equivalent to 9.0 × 10^-14 m) for the detection of C-reactive protein, which is nearly an order of magnitude more sensitive than the literature. To the best of the authors' knowledge, this study is the first to demonstrate the distinctive role of DMSN's size for QDs enrichment and LFIA. The strategy developed from this work is useful for the rational design of high-quality QDs-based nanoparticles for ultrasensitive detection.

Tailor-Made Immunochromatographic Test for the Detection of Multiple 17α-Methylated Anabolics in Dietary Supplements

In recent years, the undeclared presence of various anabolic androgenic steroids (AAS) in commercial supplements has been confirmed. This fact can be a potential threat to all athletes using these supplements, and therefore, there is of increased interest in the implementation of rapid methods for the detection of AAS. The presented study describes the development of an immunostrip test for the detection of multiple 17α-methylated AAS based on direct and indirect competitive principle using gold nanoparticles as a label. As a capture reagent on test lines conjugated stanazolol to rabbit serum albumin (RSA/ST-3) was used, the intensity of color formed in the test line of the AAS-positive sample was visually distinguishable from that of negative sample within 10 min. The optimized closed direct and indirect format of the test provided a similar visual detection limit (0.7 and 0.9 ng/mL, respectively). The most commonly orally abused AAS (17α-methyltestosterone, methandienone, methyldihydrotestosterone, oxandrolone and oxymetholone) showed a strong cross-reaction. Developed immunostrips were successfully applied to analysis of artificially contaminated dietary supplements with 17α-methylated AASs. The developed immunostrips offer potential as a useful user-friendly method for capturing suspicious dietary supplement samples with different contents of AAS at levels far below the usually used concentrations of AAS.

Development of quantum dot-based fluorescence lateral flow immunoassay strip for rapid and quantitative detection of serum interleukin-6

BACKGROUND

Interleukin-6 (IL-6) is an inflammatory factor that increases rapidly in response to infectious diseases including sepsis. The aim of this study is to develop a quantum dot (QD)-based fluorescence lateral flow immunoassay (LFIA) strip that can rapidly and accurately detect IL-6 levels.

METHODS

QD-based LFIA strips were fabricated by conjugating CdSe/ZnS QDs to the IL-6 antibody. Performance verification and clinical sample analysis were carried out to evaluate the newly developed strip.

RESULTS

QD-based LFIA strips were successfully fabricated. The test strip's linear range was 10-4000 pg/ml, with a linear correlation coefficient of R²  ≥ .959. The sensitivity of the test strip was 1.995 pg/ml. The recovery rate was 95.72%-102.63%, indicating satisfying accuracy. The coefficient of variation (CV) of the intra-assay was 2.148%-3.903%, while the inter-assay was 2.412%-5.293%, verifying the strip's high precision. The cross-reaction rates with various interleukins (IL-1α, IL-1β, IL-2, IL-4, and IL-8) and interferon-γ (IFN-γ) were all <0.1%. When the strip was placed in a 50°C oven for 1, 2, 3, and 4 weeks, the test results were not significantly altered compared to storage at room temperature. Furthermore, 200 clinical serum samples were analyzed to compare the strip with the Beckman chemiluminescence immunoassay (CLIA) kit, which revealed a high correlation (n = 200, R²  = .9971) for the detection of IL-6.

CONCLUSIONS

The QD-based test strip can rapidly and quantitatively detect IL-6 levels, thus meeting the requirement of point-of-care test (POCT) and showing excellent clinical prospects.

Ultrasensitive and Highly Specific Lateral Flow Assays for Point-of-Care Diagnosis

Lateral flow assays (LFAs) are paper-based point-of-care (POC) diagnostic tools that are widely used because of their low cost, ease of use, and rapid format. Unfortunately, traditional commercial LFAs have significantly poorer sensitivities (μM) and specificities than standard laboratory tests (enzyme-linked immunosorbent assay, ELISA: pM-fM; polymerase chain reaction, PCR: aM), thus limiting their impact in disease control. In this Perspective, we review the evolving efforts to increase the sensitivity and specificity of LFAs. Recent work to improve the sensitivity through assay improvement includes optimization of the assay kinetics and signal amplification by either reader systems or additional reagents. Together, these efforts have produced LFAs with ELISA-level sensitivities (pM-fM). In addition, sample preamplification can be applied to both nucleic acids (direct amplification) and other analytes (indirect amplification) prior to LFA testing, which can lead to PCR-level (aM) sensitivity. However, these amplification strategies also increase the detection time and assay complexity, which inhibits the large-scale POC use of LFAs. Perspectives to achieve future rapid (<30 min), ultrasensitive (PCR-level), and "sample-to-answer" POC diagnostics are also provided. In the case of LFA specificity, recent research efforts have focused on high-affinity molecules and assay optimization to reduce nonspecific binding. Furthermore, novel highly specific molecules, such as CRISPR/Cas systems, can be integrated into diagnosis with LFAs to produce not only ultrasensitive but also highly specific POC diagnostics. In summary, with continuing improvements, LFAs may soon offer performance at the POC that is competitive with laboratory techniques while retaining a rapid format.

AIEgens enabled ultrasensitive point-of-care test for multiple targets of food safety: Aflatoxin B1 and cyclopiazonic acid as an example

Food safety is currently a significant issue for human life and health. Various fluorescent nanomaterials have been applied in the point-of-care test (POCT) for food safety as labeling materials. However, previous fluorescent nanomaterials can cause aggregation-caused quenching (ACQ), thus reducing the detection sensitivity. Conversely, aggregation-induced emission luminogens (AIEgens) are promising candidates for POCT in the food safety field because they can enhance detection sensitivity and throughput. Mycotoxins, such as aflatoxin B₁ (AFB₁) and cyclopiazonic acid (CPA), are a primary threat to human life and health and a significant food safety issue, and their on-site detection from farm to table is needed. Herein, an ultrasensitive point-of-care test was developed based on TPE-Br, a blue-emissive tetraphenylethylene derivative AIEgen. Under optimal conditions, this AIEgen-based lateral-flow biosensor (ALFB) allowed for a rapid response of 8 min toward AFB₁ and CPA detection, with considerable sensitivities of 0.003 and 0.01 ng/mL in peanut matrices, respectively. In peanut matrices, the recoveries were 90.3%-110.0% for both mycotoxins, with relative standard deviations (RSDs) below 6%. The ALFB was further validated via UPLC-MS/MS using spiked peanut samples. AIEgens open an avenue for on-site, ultrasensitive, high-throughput detection methods and can be extensively used in point-of-care tests in food safety.

Rapid developments in lateral flow immunoassay for nucleic acid detection

Recently, lateral flow assay (LFA) for nucleic acid detection has drawn increasing attention in the point-of-care testing fields. Due to its rapidity, easy implementation, and low equipment requirement, it is well suited for use in rapid diagnosis, food authentication, and environmental monitoring under source-limited conditions. This review will discuss two main research directions of lateral flow nucleic acid tests. The first one is the incorporation of isothermal amplification methods with LFA, which ensures an ultra-high testing sensitivity under non-laboratory conditions. The two most commonly used methodologies will be discussed, namely Loop-mediated Isothermal Amplification (LAMP) and Recombinase Polymerase Amplification (RPA), and some novel methods with special properties will also be introduced. The second research direction is the development of novel labeling materials. It endeavors to increase the sensitivity and quantifiability of LFA testing, where signals can be read and analyzed by portable devices. These methods are compared in terms of limits of detection, detection times, and quantifiabilities. It is anticipated that future research on lateral flow nucleic acid tests will focus on the integration of the whole testing process into a microfluidic system and the combination with molecular diagnostic tools such as clustered regularly interspaced short palindromic repeats to facilitate a rapid and accurate test.

Recent advances in sensitive surface-enhanced Raman scattering-based lateral flow assay platforms for point-of-care diagnostics of infectious diseases

This review reports the recent advances in surface-enhanced Raman scattering (SERS)-based lateral flow assay (LFA) platforms for the diagnosis of infectious diseases. As observed through the recent infection outbreaks of COVID-19 worldwide, a timely diagnosis of the disease is critical for preventing the spread of a disease and to ensure epidemic preparedness. In this regard, an innovative point-of-care diagnostic method is essential. Recently, SERS-based assay platforms have received increasing attention in medical communities owing to their high sensitivity and multiplex detection capability. In contrast, LFAs provide a user-friendly and easily accessible sensing platform. Thus, the combination of LFAs with a SERS detection system provides a new diagnostic modality for accurate and rapid diagnoses of infectious diseases. In this context, we briefly discuss the recent application of LFA platforms for the POC diagnosis of SARS-CoV-2. Thereafter, we focus on the recent advances in SERS-based LFA platforms for the early diagnosis of infectious diseases and their applicability for the rapid diagnosis of SARS-CoV-2. Finally, the key issues that need to be addressed to accelerate the clinical translation of SERS-based LFA platforms from the research laboratory to the bedside are discussed.

CRISPR/Cas9-Based Lateral Flow and Fluorescence Diagnostics

Clustered regularly interspaced short palindromic repeat (CRISPR/Cas) proteins can be designed to bind specified DNA and RNA sequences and hold great promise for the accurate detection of nucleic acids for diagnostics. We integrated commercially available reagents into a CRISPR/Cas9-based lateral flow assay that can detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequences with single-base specificity. This approach requires minimal equipment and represents a simplified platform for field-based deployment. We also developed a rapid, multiplex fluorescence CRISPR/Cas9 nuclease cleavage assay capable of detecting and differentiating SARS-CoV-2, influenza A and B, and respiratory syncytial virus in a single reaction. Our findings provide proof-of-principle for CRISPR/Cas9 point-of-care diagnosis as well as a scalable fluorescent platform for identifying respiratory viral pathogens with overlapping symptomology.

Self-Assembling Allochroic Nanocatalyst for Improving Nanozyme-Based Immunochromatographic Assays

Paper-based rapid diagnostic tests, such as immunochromatographic assays, namely lateral flow immunoassay (LFA), are valuable alternatives for biomarker detection compared to traditional laboratory-based tests, but these assays need further refinement to consolidate their biosensing capabilities. Nanozyme integration into LFA systems may provide a reliable means of improving the analytic sensitivity of LFA tests. Due to the involvement of multiple liquid-handling steps, the quantitative accuracy is compromised, hence hindering the use of untrained personnel point-of-care use. Self-assembling allochroic nanocatalyst (SAN) assemblies satisfy these LFA quality measures by optimizing analyte-antibody reporting performance and by intrinsically catalyzing chromogen activation, thereby reducing the number of liquid handling steps involved during sample analysis. In SANs, the hydrophobic chromogens serve as peroxidase substrates that self-assemble into nanoparticles at high loading fractions. These features demonstrate the potential for SAN-LFAs to be a valuable patient point-of-care (POC) test. Herein, we describe the SAN fabrication process and employ SAN-LFAs to detect cardiac troponin I-troponin C (cTnI-TnC) and myoglobin (Myo) levels present in plasma samples. Using SAN-LFAs, the limits of detection for cTnI-TnC and Myo were 0.012 ng/mL and 0.2 ng/mL respectively. We also demonstrate SAN compatibility with blood samples and stability under long-term storage conditions. The successful utlization of SANs in LFA-based biomarker detection may inspire these nanocatalysts to be integrated into similar immunochromatographic testing methods.