Three-dimensional in vitro tumor models for cancer research and drug evaluation

Collagen Density Modulates the Immunosuppressive Functions of Macrophages

Tumor-associated macrophages (TAMs) support tumor growth by suppressing the activity of tumor-infiltrating T cells. Consistently, TAMs are considered a major limitation for the efficacy of cancer immunotherapy. However, the molecular reason behind the acquisition of an immunosuppressive TAM phenotype is not fully clarified. During tumor growth, the extracellular matrix (ECM) is degraded and substituted with a tumor-specific collagen-rich ECM. The collagen density of this tumor ECM has been associated with poor patient prognosis but the reason for this is not well understood. In this study, we investigated whether the collagen density could modulate the immunosuppressive activity of TAMs. The murine macrophage cell line RAW 264.7 was three-dimensionally cultured in collagen matrices of low and high collagen densities mimicking healthy and tumor tissue, respectively. Collagen density did not affect proliferation or viability of the macrophages. However, whole-transcriptome analysis revealed a striking response to the surrounding collagen density, including the regulation of immune regulatory genes and genes encoding chemokines. These transcriptional changes were shown to be similar in murine bone marrow-derived macrophages and TAMs isolated from murine tumors. Strikingly, coculture assays with primary T cells showed that macrophages cultured in high-density collagen were less efficient at attracting cytotoxic T cells and capable of inhibiting T cell proliferation more than macrophages cultured in low-density collagen. Our study demonstrates that a high collagen density can instruct macrophages to acquire an immunosuppressive phenotype. This mechanism could reduce the efficacy of immunotherapy and explain the link between high collagen density and poor prognosis.

Construction of Vascularized Oral Mucosa Equivalents Using a Layer-by-Layer Cell Coating Technology

There have been many advances in tissue engineering with respect to in vitro and in vivo models of oral mucosa equivalents (OMEs). To apply in vitro reconstructed oral mucosa models to regenerative medicine and alternatives to animal testing, it is necessary to develop the technology of reconstructing different types of oral tissues, such as control of epithelial differentiation and introduction of appendages. We previously reported that functional three-dimensional (3D) tissue models could be quickly constructed by using a layer-by-layer (LbL) cell coating technique that assembles extracellular matrix (ECM) nanofilms to a cell surface. In this study, 3D human OMEs composed of lamina-propria, keratinized or non-keratinized epithelium, and blood capillaries were constructed by using the LbL cell coating technology. Human oral mucosal fibroblasts (HOMFs) were coated with ECM nanofilms and accumulated for the construction of oral mucosal lamina-propria. To construct OMEs with keratinized or non-keratinized epithelium, human oral keratinocytes isolated from gingiva (human oral gingival keratinocytes: HOGKs) or human oral keratinocytes isolated from oral mucosa (human oral mucosal keratinocytes: HOMKs) were used in this study. We further studied the construction of epithelialized OMEs with density- and size-controlled blood capillary networks by using human umbilical vein endothelial cells (HUVECs). It was revealed that these constructions had barrier functions in accordance with their histological characterization. The OMEs with keratinization (K-OMEs) showed higher transepithelial electrical resistance (TEER) values compared with OMEs with non-keratinization (N-OMEs). The constructed epithelialized OMEs with blood capillaries are useful for in vitro/ex vivo research models and regenerative medicine as in oral tissue regeneration. The results suggest that OMEs with oral tissue appendages are more promising alternatives to animal testing and can be applied to the design of in vitro oral models that mimic human tissue organs.

Novel bexarotene derivatives: Synthesis and cytotoxicity evaluation for glioma cells in 2D and 3D in vitro models

Glioblastoma (GBM) is an aggressive and lethal form of brain cancer with a high invasion capacity and a lack of effective chemotherapeutics. Retinoid bexarotene (BXR) inhibits the neurospheroidal colony formation and migration of primary glioblastoma cells but has side effects. To enhance the BXR glioblastoma selectivity and cytotoxicity, we chemically modified it at the carboxyl group with either nitroethanolamine (NEA) bearing a NO-donating group (a well-known bioactivity enhancer; BXR-NEA) or with a dopamine (DA) moiety (to represent the highly toxic for various tumor cells N-acyldopamine family; BXR-DA). These two novel compounds were tested in the 2D (monolayer culture) and 3D (multicellular tumor spheroids) in vitro models. Both BXR-DA and BXR-NEA were found to be more toxic for rat C6 and human U-87MG glioma cells than the initial BXR. After 24 h incubation of the cells (monolayer culture) with the drugs, the IC₅₀ values were in the range of 28-42, and 122-152 μM for BXR derivatives and BXR, respectively. The cell death occurred via apoptosis according to the annexin staining and caspase activation. The tumor spheroids demonstrated higher resistance to the treatment compared to that one of the monolayer cultures. BXR-DA and BXR-NEA were more specific against tumor cells than the parental drug, in particular the selectivity index was 1.8-2.7 vs. 1.3-1.5, respectively. Moreover, they inhibited cell migration more effectively than parental BXR according to a scratch assay. Cell spreading from the tumor spheroids was also inhibited. Thus, the obtained BXR derivatives could be promising for glioblastoma treatment.

3D culture technologies of cancer stem cells: promising ex vivo tumor models

Cancer stem cells have been shown to be important in tumorigenesis processes, such as tumor growth, metastasis, and recurrence. As such, many three-dimensional models have been developed to establish an ex vivo microenvironment that cancer stem cells experience under in vivo conditions. Cancer stem cells propagating in three-dimensional culture systems show physiologically related signaling pathway profiles, gene expression, cell-matrix and cell-cell interactions, and drug resistance that reflect at least some of the tumor properties seen in vivo. Herein, we discussed the presently available Cancer stem cell three-dimensional culture models that use biomaterials and engineering tools and the biological implications of these models compared to the conventional ones.

Methodological aspects and pharmacological applications of three-dimensional cancer cell cultures and organoids

Two-dimensional (2D) cell cultures, in which cells grow in flat layers on plastic surfaces, are considered the standard model for use in drug screening and for biological assays. However, these models do not accurately represent in vivo cell organization due to a lack in cell-cell/matrix interactions and in tissue and microenvironment structure. For that reason, three-dimensional (3D) cell cultures have been introduced as an innovative platform in recent years, allowing cells to grow and interact with each other in all three dimensions thanks to an artificial environment. In a 3D model cells show more interesting aspects from a physiological point of view, demonstrating several improvements in viability, morphology, proliferation and differentiations, response to external and internal stimuli, drug metabolism and efficacy and in vivo relevance. This review explores recent techniques in the development of 3D cell models with a particular focus on their application from a pharmacological point of view, starting from the concept of spheroid models generated by scaffold-free or scaffold-based techniques. Finally, special attention is paid to the concept of organoids, 3D constructs that replicate the 3D architecture of intact organs and the technology involved.

Characterization of an Alginate Encapsulated LS180 Spheroid Model for Anti-colorectal Cancer Compound Screening

Colorectal cancer is one of the leading causes of cancer-related deaths. A main problem for its treatment is resistance to chemotherapy, requiring the development of new drugs. The success rate of new candidate cancer drugs in clinical trials remains dismal. Three-dimensional (3D) cell culture models have been proposed to bridge the current gap between in vitro chemotherapeutic studies and the human in vivo, due to shortcomings in the physiological relevance of the commonly used two-dimensional cell culture models. In this study, LS180 colorectal cancer cells were cultured as 3D sodium alginate encapsulated spheroids in clinostat bioreactors. Growth and viability were evaluated for 20 days to determine the ideal experimental window. The 3- (4,5- dimethylthiazol- 2- yl)-2,5-diphenyltetrazolium bromide assay was then used to establish half maximal inhibitory concentrations for the standard chemotherapeutic drug, paclitaxel. This concentration was used to further evaluate the established 3D model. During model characterization and evaluation soluble protein content, intracellular adenosine triphosphate levels, extracellular adenylate kinase, glucose consumption, and P-glycoprotein (P-gp) gene expression were measured. Use of the model for chemotherapeutic treatment screening was evaluated using two concentrations of paclitaxel, and treatment continued for 96 h. Paclitaxel caused a decrease in cell growth, viability, and glucose consumption in the model. Furthermore, relative expression of P-gp increased compared to the untreated control group. This is a typical resistance-producing change, seen in vivo and known to be a result of paclitaxel treatment. It was concluded that the LS180 sodium alginate encapsulated spheroid model could be used for testing new chemotherapeutic compounds for colorectal cancer.

Designer Self-Assembling Peptide Hydrogels to Engineer 3D Cell Microenvironments for Cell Constructs Formation and Precise Oncology Remodeling in Ovarian Cancer

Designer self-assembling peptides form the entangled nanofiber networks in hydrogels by ionic-complementary self-assembly. This type of hydrogel has realistic biological and physiochemical properties to serve as biomimetic extracellular matrix (ECM) for biomedical applications. The advantages and benefits are distinct from natural hydrogels and other synthetic or semisynthetic hydrogels. Designer peptides provide diverse alternatives of main building blocks to form various functional nanostructures. The entangled nanofiber networks permit essential compositional complexity and heterogeneity of engineering cell microenvironments in comparison with other hydrogels, which may reconstruct the tumor microenvironments (TMEs) in 3D cell cultures and tissue-specific modeling in vitro. Either ovarian cancer progression or recurrence and relapse are involved in the multifaceted TMEs in addition to mesothelial cells, fibroblasts, endothelial cells, pericytes, immune cells, adipocytes, and the ECM. Based on the progress in common hydrogel products, this work focuses on the diverse designer self-assembling peptide hydrogels for instructive cell constructs in tissue-specific modeling and the precise oncology remodeling for ovarian cancer, which are issued by several research aspects in a 3D context. The advantages and significance of designer peptide hydrogels are discussed, and some common approaches and coming challenges are also addressed in current complex tumor diseases.

The Efficiency of Gene Electrotransfer in Breast-Cancer Cell Lines Cultured on a Novel Collagen-Free 3D Scaffold

Gene Electro-Transfer (GET) is a powerful method of DNA delivery with great potential for medical applications. Although GET has been extensively studied in vitro and in vivo, the optimal parameters remain controversial. 2D cell cultures have been widely used to investigate GET protocols, but have intrinsic limitations, whereas 3D cultures may represent a more reliable model thanks to the capacity of reproducing the tumor architecture. Here we applied two GET protocols, using a plate or linear electrode, on 3D-cultured HCC1954 and MDA-MB231 breast cancer cell lines grown on a novel collagen-free 3D scaffold and compared results with conventional 2D cultures. To evaluate the electrotransfer efficiency, we used the plasmid pEGFP-C3 encoding the enhanced green fluorescent protein (EGFP) reporter gene. The novel 3D scaffold promoted extracellular matrix deposition, which particularly influences cell behavior in both in vitro cell cultures and in vivo tumor tissue. While the transfection efficiency was similar in the 2D-cultures, we observed significant differences in the 3D-model. The transfection efficiency in the 3D vs 2D model was 44% versus 15% (p < 0.01) and 24% versus 17% (p < 0.01) in HCC1954 and MDA-MB231 cell cultures, respectively. These findings suggest that the novel 3D scaffold allows reproducing, at least partially, the peculiar morphology of the original tumor tissues, thus allowing us to detect meaningful differences between the two cell lines. Following GET with plate electrodes, cell viability was higher in 3D-cultured HCC1954 (66%) and MDA-MB231 (96%) cell lines compared to their 2D counterpart (53% and 63%, respectively, p < 0.001). Based on these results, we propose the novel 3D scaffold as a reliable support for the preparation of cell cultures in GET studies. It may increase the reliability of in vitro assays and allow the optimization of GET parameters of in vivo protocols.

Popular three-dimensional models: Advantages for cancer, Alzheimer's and cardiovascular diseases

The increasing prevalence of non-communicable diseases, namely cancer, Alzheimer's (AD) and cardiovascular diseases (CVDs), worldwide continues to be a major health burden. Research attempts have been made to understand the pathophysiology and develop effective therapeutic agents for these diseases using conventional in vitro and ex vivo models. Due to the complexity of human disease mechanisms, often these models fail to recapitulate clinically relevant pathologies. As such, interests are arising in the exploration of three-dimensional (3D) in-vitro models, which create an artificial environment to closely mimic in vivo human conditions. Several studies have developed 3D models for cancer, AD and CVD research which can greatly improve the understanding of biological mechanisms and mirror clinical drug activities. Thus, 3D cultures may provide new in-vitro models that recapitulate the architecture and biological mechanisms of human diseases prior to the need for the use of sentient animals.

Modulating the Distant Spreading of Patient-Derived Colorectal Cancer Cells via Aspirin and Metformin

Although screening has reduced mortality rates for colorectal cancer (CRC), about 20% of patients still carry metastases at diagnosis. Postsurgery chemotherapy is toxic and induces drug resistance. Promising alternative strategies rely on repurposing drugs such as aspirin (ASA) and metformin (MET). Here, tumor spheroids were generated in suspension by primary CRCs and metastatic lymph nodes from 11 patients. These spheroids presented a heterogeneous cell population including a small core of CD133+/ESA+ cancer stem cells surrounded by a thick corona of CDX2+/CK20+ CRC cells, thus maintaining the molecular hallmarks of the tumor source. Spheroids were exposed to ASA and/or MET at different doses for up to 7 days to assess cell growth, migration, and adhesion in three-dimensional assays. While ASA at 5 mM was always sufficient to mitigate cell migration, the response to MET was patient specific. Only in MET-sensitive spheroids, the 5 mM ASA/MET combination showed an effect. Interestingly, CRCs from diabetic patients daily pretreated with MET gave a very low spheroid yield due to reduced cancer cell survival. This study highlights the potential of ASA/MET treatments to modulate CRC spreading.

Identification of synergistic drug combinations using breast cancer patient-derived xenografts

Compared with other breast cancer subtypes, triple-negative breast cancer (TNBC) is associated with relatively poor outcomes due to its metastatic propensity, frequent failure to respond to chemotherapy, and lack of alternative, targeted treatment options, despite decades of major research efforts. Our studies sought to identify promising targeted therapeutic candidates for TNBC through in vitro screening of 1,363 drugs in patient-derived xenograft (PDX) models. Using this approach, we generated a dataset that can be used to assess and compare responses of various breast cancer PDXs to many different drugs. Through a series of further drug screening assays and two-drug combination testing, we identified that the combination of afatinib (epidermal growth factor receptor (EGFR) inhibitor) and YM155 (inhibitor of baculoviral inhibitor of apoptosis repeat-containing 5 (BIRC5; survivin) expression) is synergistically cytotoxic across multiple models of basal-like TNBC and reduces PDX mammary tumor growth in vivo. We found that YM155 reduces EGFR expression in TNBC cells, shedding light on its potential mechanism of synergism with afatinib. Both EGFR and BIRC5 are highly expressed in basal-like PDXs, cell lines, and patients, and high expression of both genes reduces metastasis-free survival, suggesting that co-targeting of these proteins holds promise for potential clinical success in TNBC.

The density of infiltrating T cells and macrophages in the parental tumour correlates with growth rate of tumoroids established from colorectal adenocarcinoma

The aim of the present study was to investigate the correlation between the density of infiltrating T cells and macrophages in the parental colorectal cancer (CRC) and the growth rate of tumoroids (i.e. a patient-derived in vitro 3D model). Tumoroids were established from fresh specimens of primary and metastatic CRC from 29 patients. The in vitro growth rate of tumoroids was monitored by automated imaging. The density of infiltrating T cells and macrophages was determined in the centre of the tumour (CT) and at the invasive margin (IM) of the parental tumours. This was performed by digital image analysis on the whole-slide scanned images using Visiopharm^® software. Tumoroids with higher density of infiltrating CD3+ lymphocytes in the IM of their parental tumour showed a higher growth rate (P < .0005). The average relative growth rate (log10) during the period from day 1 to day 11 was 0.364 ± 0.006 (mean ± SD) for the CD3+ (IM)-high group and 0.273 ± 0.008 (mean ± SD) for the CD3+ (IM)-low group. In contrast, the density of CD68+ infiltrating macrophages in the parental tumours showed significant inverse effect on the growth rate of the tumoroids (P < .0005). The present study showed that the density of immune cells in the parental CRC correlates with the growth rate of the tumoroids. The future perspective for such a 3D model could be in vitro investigations of the tumour-associated inflammatory microenvironment as well as personalized cancer immunotherapy.

Nanoparticles and Microfluidic Devices in Cancer Research

Cancer is considered the disease of the century, which can be easily understood considering its increasing incidence worldwide. Over the last years, nanotechnology has been presenting promising theranostic approaches to tackle cancer, as the development of nanoparticle-based therapies. But, regardless of the promising outcomes within in vitro settings, its translation into the clinics has been delayed. One of the main reasons is the lack of an appropriate in vitro model, capable to mimic the true environment of the human body, to test the designed nanoparticles. In fact, most of in vitro models used for the validation of nanoparticle-based therapies do not address adequately the complex barriers that naturally occur in a tumor scenario, as such as blood vessels, the interstitial fluid pressure or the interactions with surrounding cells that can hamper the proper delivery of the nanoparticles into the desired site. In this reasoning, to get a step closer to the in vivo reality, it has been proposed of the use of microfluidic devices. In fact, microfluidic devices can be designed on-demand to exhibit complex structures that mimic tissue/organ-level physiological architectures. Even so, despite microfluidic-based in vitro models do not compare with the reality and complexity of the human body, the most complex systems created up to now have been showing similar results to in vivo animal models. Microfluidic devices have been proven to be a valuable tool to accomplish more realistic tumour's environment. The recent advances in this field, and in particular, the ones enabling the rapid test of new therapies, and show great promise to be translated to the clinics will be overviewed herein.

Animal tissue culture principles and applications

Animal cell culture technology in today’s scenario has become indispensable in the field of life sciences, which provides a basis to study regulation, proliferation, and differentiation and to perform genetic manipulation. It requires specific technical skills to carry out successfully. This chapter describes the essential techniques of animal cell culture as well as its applications.

Hyaluronic acid-based extracellular matrix triggers spontaneous M2-like polarity of monocyte/macrophage

Hyaluronic acid (HA) is found in various tumor tissues, and is considered tumor-associated extracellular matrix (ECM). Within this tumor-associated ECM, stromal cells, especially immune cells, are involved in tumor progression. However, the effects of tumor-associated ECM on the characteristics of immune cells remain unexplored. Therefore, we studied the triggering effect of HA on spontaneous M2-like polarity of monocytes/macrophages using HA-mixed collagen (HA-COL) matrix. In the presence of HA, expression of the HA receptor (CD44) and M2 polarity-related genes was upregulated in human monocytes (THP-1 cells). We confirmed the CD44-mediated activation of STAT3 in THP-1 cells cultured in an HA-rich environment. Furthermore, when we induced the THP-1 cells to differentiate into cells with M1 or M2 polarity within an HA-rich environment, the HA-rich environment influenced the direction of induction. Our findings might improve understanding of the crosstalk between immune cells and tumor-associated ECM, and facilitate development of tumor immunotherapy strategies.

3D Tissue-Engineered Tumor Model for Ewing's Sarcoma That Incorporates Bone-like ECM and Mineralization

The tumor microenvironment harbors essential components required for cancer progression including biochemical signals and mechanical cues. To study the effects of microenvironmental elements on Ewing's sarcoma (ES) pathogenesis, we tissue-engineered an acellular three-dimensional (3D) bone tumor niche from electrospun poly(ε-caprolactone) (PCL) scaffolds that incorporate bone-like architecture, extracellular matrix (ECM), and mineralization. PCL-ECM constructs were generated by decellularizing PCL scaffolds harboring cultures of osteogenic human mesenchymal stem cells. The PCL-ECM constructs simulated in vivo-like tumor architecture and increased the proliferation of ES cells compared to PCL scaffolds alone. Compared to monolayer controls, 3D environments facilitated the downregulation of the canonical insulin-like growth factor 1 receptor (IGF-1R) signal cascade through mechanistic target of rapamycin (mTOR), both of which are targets of recent clinical trials. In addition to the downregulation of canonical IGF-1R signaling, 3D environments promoted a reduction in the clathrin-dependent nuclear localization and transcriptional activity of IGF-1R. In vitro drug testing revealed that 3D environments generated cell phenotypes that were resistant to mTOR inhibition and chemotherapy. Our versatile PCL-ECM constructs allow for the investigation of the roles of various microenvironmental elements in ES tumor growth, cancer cell morphology, and induction of resistant cell phenotypes.

Finding the perfect match between nanoparticles and microfluidics to respond to cancer challenges

The clinical translation of new cancer theranostic has been delayed by inherent cancer's heterogeneity. Additionally, this delay has been enhanced by the lack of an appropriate in vitro model, capable to produce accurate data. Nanoparticles and microfluidic devices have been used to obtain new and more efficient strategies to tackle cancer challenges. On one hand, nanoparticles-based therapeutics can be modified to target specific cells, and/or molecules, and/or modified with drugs, releasing them over time. On the other hand, microfluidic devices allow the exhibition of physiologically complex systems, incorporation of controlled flow, and control of the chemical environment. Herein, we review the use of nanoparticles and microfluidic devices to address different cancer challenges, such as detection of CTCs and biomarkers, point-of-care devices for early diagnosis and improvement of therapies. The future perspectives of cancer challenges are also addressed herein.

Self-assemble peptide biomaterials and their biomedical applications

Inspired by self-assembling peptides found in native proteins, deliberately designed engineered peptides have shown outstanding biocompatibility, biodegradability, and extracellular matrix-mimicking microenvironments. Assembly of the peptides can be triggered by external stimuli, such as electrolytes, temperature, and pH. The formation of nanostructures and subsequent nanocomposite materials often occur under physiological conditions. The respective properties of side chains in each amino acids provide numerous sites for chemical modification and conjugation choices of the peptides, enabling various resulting supramolecular nanostructures and hydrogels with adjustable mechanical and physicochemical properties. Moreover, additional functionalities can be easily induced into the hydrogels, including shear-thinning, bioactivity, self-healing, and shape memory. It further broaden the scope of application of self-assemble peptide materials. This review outlines designs of self-assembly peptide (β-sheet, α-helix, collagen-like peptides, elastin-like polypeptides, and peptide amphiphiles) with potential additional functionalities and their biomedical applications in bioprinting, tissue engineering, and drug delivery.

New Frontiers for Biofabrication and Bioreactor Design in Microphysiological System Development

Microphysiological systems (MPSs) have been proposed as an improved tool to recreate the complex biological features of the native niche with the goal of improving in vitro-in vivo extrapolation. In just over a decade, MPS technologies have progressed from single-tissue chips to multitissue plates with integrated pumps for perfusion. Concurrently, techniques for biofabrication of complex 3D constructs for regenerative medicine and 3D in vitro models have evolved into a diverse toolbox for micrometer-scale deposition of cells and cell-laden bioinks. However, as the complexity of biological models increases, experimental throughput is often compromised. This review discusses the existing disparity between MPS complexity and throughput, then examines an MPS-terminated biofabrication line to identify the hurdles and potential approaches to overcoming this disparity.

Remote Actuation of Apoptosis in Liver Cancer Cells via Magneto-Mechanical Modulation of Iron Oxide Nanoparticles

Lysosome-activated apoptosis represents an alternative method of overcoming tumor resistance compared to traditional forms of treatment. Pulsed magnetic fields open a new avenue for controlled and targeted initiation of lysosomal permeabilization in cancer cells via mechanical actuation of magnetic nanomaterials. In this study we used a noninvasive tool; namely, a benchtop pulsed magnetic system, which enabled remote activation of apoptosis in liver cancer cells. The magnetic system we designed represents a platform that can be used in a wide range of biomedical applications. We show that liver cancer cells can be loaded with superparamagnetic iron oxide nanoparticles (SPIONs). SPIONs retained in lysosomal compartments can be effectively actuated with a high intensity (up to 8 T), short pulse width (~15 µs), pulsed magnetic field (PMF), resulting in lysosomal membrane permeabilization (LMP) in cancer cells. We revealed that SPION-loaded lysosomes undergo LMP by assessing an increase in the cytosolic activity of the lysosomal cathepsin B. The extent of cell death induced by LMP correlated with the accumulation of reactive oxygen species in cells. LMP was achieved for estimated forces of 700 pN and higher. Furthermore, we validated our approach on a three-dimensional cellular culture model to be able to mimic in vivo conditions. Overall, our results show that PMF treatment of SPION-loaded lysosomes can be utilized as a noninvasive tool to remotely induce apoptosis.

A stimuli-responsive combination therapy for recovering p53-inactivation associated drug resistance

Drug resistance is a major hindrance in the anticancer treatment, which encourages the development of effective therapeutic strategies. For the first time, MDM2-mediated p53 degradation was identified as a critical factor for developing acquired resistance of doxorubicin (DOX) in HepG2 tumor spheroids, which could be effectively reversed by MDM2 inhibitor MI-773, thereby improving anticancer effects. Therefore, a pH-sensitive liposomal formulation of DOX and MI-773 (LipD/M@CMCS) were developed for recovering p53-mediated DOX resistance in hepatocellular carcinoma. LipD/M@CMCS were composed of cationic liposomes covered with carboxymethyl chitosan (pI = 6.8), and were stable in the physiological condition (pH 7.4), but rapidly converted to cationic liposomes in tumor acidic microenvironment (pH 6.5), endowing them with tumor specificity and enhanced cellular uptake. We showed that LipD/M@CMCS could not only effectively induce cell apoptosis in HepG2 tumor spheroids, but significantly inhibit tumor growth with minimal adverse effects. In summary, selective regulation of MDM2 in cancer cells is a promising strategy to overcome DOX resistance, and may provide a perspective on the management of malignant tumors.

Sonoprinting liposomes on tumor spheroids by microbubbles and ultrasound

Ultrasound-triggered drug-loaded microbubbles have great potential for drug delivery due to their ability to locally release drugs and simultaneously enhance their delivery into the target tissue. We have recently shown that upon applying ultrasound, nanoparticle-loaded microbubbles can deposit nanoparticles onto cells grown in 2D monolayers, through a process that we termed "sonoprinting". However, the rigid surfaces on which cell monolayers are typically growing might be a source of acoustic reflections and aspherical microbubble oscillations, which can influence microbubble-cell interactions. In the present study, we aim to reveal whether sonoprinting can also occur in more complex and physiologically relevant tissues, by using free-floating 3D tumor spheroids as a tissue model. We show that both monospheroids (consisting of tumor cells alone) and cospheroids (consisting of tumor cells and fibroblasts, which produce an extracellular matrix) can be sonoprinted. Using doxorubicin-liposome-loaded microbubbles, we show that sonoprinting allows to deposit large amounts of doxorubicin-containing liposomes to the outer cell layers of the spheroids, followed by doxorubicin release into the deeper layers of the spheroids, resulting in a significant reduction in cell viability. Sonoprinting may become an attractive approach to deposit drug patches at the surface of tissues, thereby promoting the delivery of drugs into target tissues.

Development and Evaluation of Paclitaxel-Loaded Aerosol Nanocomposite Microparticles and Their Efficacy Against Air-Grown Lung Cancer Tumor Spheroids

Paclitaxel (as intravenous Taxol) is one of the most applied chemotherapeutics used for the treatment of lung cancer. This project involves the development of a dry powder nanocomposite microparticle (nCmP) aerosol containing PTX-loaded nanoparticles (NP) to be delivered via a dry powder inhaler to the lungs for the treatment of non-small cell lung cancer (NSCLC). Nanoparticles were formulated by a single emulsion and solvent evaporation method, producing smooth, neutral PTX NP of approximately 200 nm in size. PTX nCmP were obtained via spray drying PTX NP with mannitol, producing amorphous wrinkled particles that demonstrated optimal aerosol deposition for in vitro pulmonary delivery. Free PTX, PTX NP, and PTX nCmP were evaluated in vitro in both 2D monolayers and 3D multicellular spheroids (MCS). PTX NP enhanced cytotoxicity when compared to pure drug in the 2D evaluation. However, on a liquid culture 3D tumor spheroid model, PTX NP and pure PTX showed similar efficacy in growth inhibition of MCS. The PTX nCmP formulation had a comparable cytotoxicity impact on MCS compared with free PTX. Finally, PTX nCmP were evaluated in an air-grown 3D MCS platform that mimics the pulmonary environment, representing a new model for the assessment of dry powder formulations.

Cancer Sample Biobanking at the Next Level: Combining Tissue With Living Cell Repositories to Promote Precision Medicine

Biorespositories of formalin-fixed and paraffin-embedded (FFPE) or fresh frozen human tissues from malignant diseases generated as integral part of the diagnostic workup in many pathology departments have been pivotal resources for translational cancer studies. However, such tissue biobanks have traditionally contained only non-viable specimens and thus cannot enable functional assays for the discovery and validation of therapeutic targets or the assessment of drug responses and resistance to treatment. To overcome these limitations, we have developed a next-generation comprehensive biobanking platform that includes the generation of patient-derived in vitro cell models from colorectal, pancreatic and kidney cancers among others. As such patient-derived cell (PDC) models retain important features of the original human tumors, they have emerged as relevant tools for more dynamic clinical and experimental analyses of cancer. Here, we describe details of the complex processes of acquisition and processing of patient-derived samples, propagation, annotation, characterization and distribution of resulting cell models and emphasize the requirements of quality assurance, organizational considerations and investment into resources. Taken together, we show how clinical tissue collections can be taken to the next level thus promising major new opportunities for understanding and treating cancer in the context of precision medicine.

Three dimensional in vitro models of cancer: Bioprinting multilineage glioblastoma models

Three dimensional (3D) bioprinting of multiple cell types within optimised extracellular matrices has the potential to more closely model the 3D environment of human physiology and disease than current alternatives. In this study, we used a multi-nozzle extrusion bioprinter to establish models of glioblastoma made up of cancer and stromal cells printed within matrices comprised of alginate modified with RGDS cell adhesion peptides, hyaluronic acid and collagen-1. Methods were developed using U87MG glioblastoma cells and MM6 monocyte/macrophages, whilst more disease relevant constructs contained glioblastoma stem cells (GSCs), co-printed with glioma associated stromal cells (GASCs) and microglia. Printing parameters were optimised to promote cell-cell interaction, avoiding the 'caging in' of cells due to overly dense cross-linking. Such printing had a negligible effect on cell viability, and cells retained robust metabolic activity and proliferation. Alginate gels allowed the rapid recovery of printed cell protein and RNA, and fluorescent reporters provided analysis of protein kinase activation at the single cell level within printed constructs. GSCs showed more resistance to chemotherapeutic drugs in 3D printed tumour constructs compared to 2D monolayer cultures, reflecting the clinical situation. In summary, a novel 3D bioprinting strategy is developed which allows control over the spatial organisation of tumour constructs for pre-clinical drug sensitivity testing and studies of the tumour microenvironment.

Simple In-House Fabrication of Microwells for Generating Uniform Hepatic Multicellular Cancer Aggregates and Discovering Novel Therapeutics

Three-dimensional (3D) cell culture models have become powerful tools because they better simulate the in vivo pathophysiological microenvironment than traditional two-dimensional (2D) monolayer cultures. Tumor cells cultured in a 3D system as multicellular cancer aggregates (MCAs) recapitulate several critical in vivo characteristics that enable the study of biological functions and drug discovery. The microwell, in particular, has emerged as a revolutionary technology in the generation of MCAs as it provides geometrically defined microstructures for culturing size-controlled MCAs amenable for various downstream functional assays. This paper presents a simple and economical microwell fabrication methodology that can be conveniently incorporated into a conventional laboratory setting and used for the discovery of therapeutic interventions for liver cancer. The microwells were 400-700 µm in diameter, and hepatic MCAs (Huh-7 cells) were cultured in them for up to 5 days, over which time they grew to 250-520 µm with good viability and shape. The integrability of the microwell fabrication with a high-throughput workflow was demonstrated using a standard 96-well plate for proof-of-concept drug screening. The IC50 of doxorubicin was determined to be 9.3 µM under 2D conditions and 42.8 µM under 3D conditions. The application of photothermal treatment was demonstrated by optimizing concanavalin A-FITC conjugated silica-carbon hollow spheres (SCHSs) at a concentration of 500:200 µg/mL after a 2 h incubation to best bind with MCAs. Based on this concentration, which was appropriate for further photothermal treatment, the relative cell viability was assessed through exposure to a 3 W/cm2 near-infrared laser for 20 min. The relative fluorescence intensity showed an eight-fold reduction in cell viability, confirming the feasibility of using photothermal treatment as a potential therapeutic intervention. The proposed microwell integration is envisioned to serve as a simple in-house technique for the generation of MCAs useful for discovering therapeutic modalities for liver cancer treatment.

Addressing Patient Specificity in the Engineering of Tumor Models

Cancer treatment is challenged by the heterogeneous nature of cancer, where prognosis depends on tumor type and disease stage, as well as previous treatments. Optimal patient stratification is critical for the development and validation of effective treatments, yet pre-clinical model systems are lacking in the delivery of effective individualized platforms that reflect distinct patient-specific clinical situations. Advances in cancer cell biology, biofabrication, and microengineering technologies have led to the development of more complex in vitro three-dimensional (3D) models to act as drug testing platforms and to elucidate novel cancer mechanisms. Mostly, these strategies have enabled researchers to account for the tumor microenvironment context including tumor-stroma interactions, a key factor of heterogeneity that affects both progression and therapeutic resistance. This is aided by state-of-the-art biomaterials and tissue engineering technologies, coupled with reproducible and high-throughput platforms that enable modeling of relevant physical and chemical factors. Yet, the translation of these models and technologies has been impaired by neglecting to incorporate patient-derived cells or tissues, and largely focusing on immortalized cell lines instead, contributing to drug failure rates. While this is a necessary step to establish and validate new models, a paradigm shift is needed to enable the systematic inclusion of patient-derived materials in the design and use of such models. In this review, we first present an overview of the components responsible for heterogeneity in different tumor microenvironments. Next, we introduce the state-of-the-art of current in vitro 3D cancer models employing patient-derived materials in traditional scaffold-free approaches, followed by novel bioengineered scaffold-based approaches, and further supported by dynamic systems such as bioreactors, microfluidics, and tumor-on-a-chip devices. We critically discuss the challenges and clinical prospects of models that have succeeded in providing clinical relevance and impact, and present emerging concepts of novel cancer model systems that are addressing patient specificity, the next frontier to be tackled by the field.

Recent advances in metabolomics of triple negative breast cancer

Triple-negative Breast Cancer (TNBC) is considered as the most aggressive subtype of breast cancer. Metabolic profiling has a great significance in cancer research due to profound changes in the metabolism of cancer cells. It has been used to investigate the entire set of metabolites and changes associated with it in disease conditions. These changes in the expression levels of metabolites bring functional changes associated with the pharmacological or nutritional intervention. The present minireview presents a brief note on changes associated with TNBC aggressiveness in terms of metabolomics.

Human bronchial carcinoid tumor initiating cells are targeted by the combination of acetazolamide and sulforaphane

Background

Bronchial carcinoids are neuroendocrine tumors that present as typical (TC) and atypical (AC) variants, the latter being more aggressive, invasive and metastatic. Studies of tumor initiating cell (TIC) biology in bronchial carcinoids has been hindered by the lack of appropriate in-vitro and xenograft models representing the bronchial carcinoid phenotype and behavior.

Methods

Bronchial carcinoid cell lines (H727, TC and H720, AC) were cultured in serum-free growth factor supplemented medium to form 3D spheroids and serially passaged up to the 3rd generation permitting expansion of the TIC population as verified by expression of stemness markers, clonogenicity in-vitro and tumorigenicity in both subcutaneous and orthotopic (lung) models. Acetazolamide (AZ), sulforaphane (SFN) and the AZ + SFN combination were evaluated for targeting TIC in bronchial carcinoids.

Results

Data demonstrate that bronchial carcinoid cell line 3rd generation spheroid cells show increased drug resistance, clonogenicity, and tumorigenic potential compared with the parental cells, suggesting selection and expansion of a TIC fraction. Gene expression and immunolabeling studies demonstrated that the TIC expressed stemness factors Oct-4, Sox-2 and Nanog. In a lung orthotopic model bronchial carcinoid, cell line derived spheroids, and patient tumor derived 3rd generation spheroids when supported by a stroma, showed robust tumor formation. SFN and especially the AZ + SFN combination were effective in inhibiting tumor cell growth, spheroid formation and in reducing tumor formation in immunocompromised mice.

Conclusions

Human bronchial carcinoid tumor cells serially passaged as spheroids contain a higher fraction of TIC exhibiting a stemness phenotype. This TIC population can be effectively targeted by the combination of AZ + SFN. Our work portends clinical relevance and supports the therapeutic use of the novel AZ+ SFN combination that may target the TIC population of bronchial carcinoids.

Cell-Laden Hydrogel as a Clinical-Relevant 3D Model for Analyzing Neuroblastoma Growth, Immunophenotype, and Susceptibility to Therapies

High risk Neuroblastoma (NB) includes aggressive, metastatic solid tumors of childhood. The survival rate improved only modestly, despite the use of combination therapies including novel immunotherapies based on the antibody-mediated targeting of tumor-associated surface ligands. Treatment failures may be due to the lack of adequate in vitro models for studying, in a given patient, the efficacy of potential therapeutics, including those aimed to enhance anti-tumor immune responses. We here propose a 3D alginate-based hydrogel as extracellular microenvironment to evaluate the effects of the three-dimensionality on biological and immunological properties of NB cells. NB cell lines grown within the 3D alginate spheres presented spheroid morphology, optimal survival, and proliferation capabilities, and a reduced sensitivity to the cytotoxic effect of imatinib mesylate. 3D cultured NB cells were also evaluated for the constitutive and IFN-γ-induced expression of surface molecules capable of tuning the anti-tumor activity of NK cells including immune checkpoint ligands. In particular, IFN-γ induced de novo expression of high amounts of HLA-I molecules, which protected NB cells from the attack mediated by KIR/KIR-L matched NK cells. Moreover, in the 3D alginate spheres, the cytokine increased the expression of the immune checkpoint ligands PD-Ls and B7-H3 while virtually abrogating that of PVR, a ligand of DNAM-1 activating receptor, whose expression correlates with high susceptibility to NK-mediated killing. Our 3D model highlighted molecular features that more closely resemble the immunophenotypic variants occurring in vivo and not fully appreciated in classical 2D culture conditions. Thus, based on our results, 3D alginate-based hydrogels might represent a clinical-relevant cell culture platform where to test the efficacy of personalized therapeutic approaches aimed to optimize the current and innovative immune based therapies in a very systematic and reliable way.

Stirred Suspension Bioreactor Culture of Porcine Induced Pluripotent Stem Cells

Induced pluripotent stem cells (iPSCs) are an attractive cell source for regenerative medicine and the development of therapies, as they can proliferate indefinitely under defined conditions and differentiate into any cell type in the body. Large-scale expansion of cells is limited in adherent culture, making it difficult to obtain adequate cell numbers for research. It has been previously shown that stirred suspension bioreactors (SSBs) can be used to culture mouse and human stem cells. Pigs are important preclinical models for stem cell research. Therefore, this study investigated the use of SSBs as an alternative culture method for the expansion of iPSCs. Using an established porcine iPSC (piPSC) line as well as a new cell line derived and characterized in the current study, we report that piPSCs can grow in SSB while maintaining characteristics of pluripotency and karyotypic stability similar to cells grown in traditional two-dimensional static culture. This culture method provides a suitable platform for scale-up of cell culture to provide adequate cell numbers for future research applications involving piPSCs.

Review on biofabrication and applications of heterogeneous tumor models

Resolving the origin and development of tumor heterogeneity has proven to be a crucial challenge in cancer research. In vitro tumor models have been widely used for both scientific and clinical research. Currently, tumor models based on 2D cell culture, animal models, and 3D cell-laden constructs are widely used. Heterogeneous tumor models, which consist of more than one cell type and mimic cell-cell as well as cell-matrix interactions, are attracting increasing attention. Heterogeneous tumor models can serve as pathological models to study the microenvironment and tumor development such as tumorigenesis, invasiveness, and malignancy. They also provide disease models for drug screening and personalized therapy. In this review, the current techniques, models, and oncological applications regarding 3D heterogeneous tumor models are summarized and discussed.

A cell-loss-free concave microwell array based size-controlled multi-cellular tumoroid generation for anti-cancer drug screening

The 3D multi-cellular tumoroid (MCT) model is an in vivo-like, avascular tumor model that has received much attention as a refined screening platform for drug therapies. Several types of research have been efforted to improve the physiological characteristics of the tumor microenvironment (TME) of the in vivo-like MCTs. Size-controlled MCTs have received much attention for obtaining highly reproducible results in drug screening assays and achieving a homogeneous and meaningful level of biological activities. Here, we describe an effective method for fabricating the size-controlled in vivo-like MCTs using a cell-loss-free (CLF) microwell arrays. The CLF microwell arrays was fabricated by using the simple operation of laser carving of a poly (methyl methacrylate) (PMMA) master mold. We also demonstrated the biophysicochemical effect of tumor microenvironment (TME) resident fibroblasts through the expression of TGFβ, αSMA, Type I-, IV collagen, angiogenesis related markers on tumorigenesis, and confirmed the drug response of MCTs with anti-cancer agents. This technology for the fabrication of CLF microwell arrays could be used as an effective method to produce an in vitro tumor model for cancer research and drug discovery.

Engineered Models of Metastasis with Application to Study Cancer Biomechanics

Three-dimensional complex biomechanical interactions occur from the initial steps of tumor formation to the later phases of cancer metastasis. Conventional monolayer cultures cannot recapitulate the complex microenvironment and chemical and mechanical cues that tumor cells experience during their metastatic journey, nor the complexity of their interactions with other, noncancerous cells. As alternative approaches, various engineered models have been developed to recapitulate specific features of each step of metastasis with tunable microenvironments to test a variety of mechanistic hypotheses. Here the main recent advances in the technologies that provide deeper insight into the process of cancer dissemination are discussed, with an emphasis on three-dimensional and mechanical factors as well as interactions between multiple cell types.

Exploring the interactions between engineered nanomaterials and immune cells at 3D nano-bio interfaces to discover potent nano-adjuvants

Engineered nanomaterials (ENMs) as adjuvants can potentiate the adaptive immune responses to antigens by activating immune cells in three dimensional (3D) matrixes of tissues. However, few reports explored the interactions of nano-adjuvants and immune cells at 3D nano-bio interfaces. Herein we designed an alginate-calcium microsphere of macrophage cells to explore the interactions. By an extensive comparison of ENM-induced cytokines in 2D and 3D cultured cells, IL-1β released in 3D microspheres was found to be a predictive biomarker to assess ENM-induced immune responses in vivo. Among nine representative ENMs, La₂O₃ boosts the highest adaptive humoral immune response, even stronger than clinically used Alum adjuvant. It could be attributed to the biotransformation of La₂O₃ from spherical particles into urchin-like LaPO₄, resulting in strong biopersistence and NLRP3 inflammasome activation. These findings could be potentially used for the high throughput screening of nano-adjuvants from increasingly invented ENMs to speed up their clinical uses.

Biomimetic Designer Scaffolds Made of D,L-Lactide-ɛ-Caprolactone Polymers by 2-Photon Polymerization

IMPACT STATEMENT

In tissue engineering (TE), the establishment of cell targeting materials, which mimic the conditions of the physiological extracellular matrix (ECM), seems to be a mission impossible without advanced materials and fabrication techniques. With this in mind we established a toolbox based on (D,L)-lactide-ɛ-caprolactone methacrylate (LCM) copolymers in combination with a nano-micromaskless lithography technique, the two-photon polymerization (2-PP) to mimic the hierarchical structured and complex milieu of the natural ECM. To demonstrate the versatility of this toolbox, we choose two completely different application scenarios in bone and tumor TE to show the high potential of this concept in therapeutic and diagnostic application.

PLA Electrospun Scaffolds for Three-Dimensional Triple-Negative Breast Cancer Cell Culture

Three-dimensional (3D) systems provide a suitable environment for cells cultured in vitro since they reproduce the physiological conditions that traditional cell culture supports lack. Electrospinning is a cost-effective technology useful to manufacture scaffolds with nanofibers that resemble the extracellular matrix that surround cells in the organism. Poly(lactic acid) (PLA) is a synthetic polymer suitable for biomedical applications. The main objective of this study is to evaluate electrospun (ES)-PLA scaffolds to be used for culturing cancer cells. Triple-negative breast cancer (TNBC) is the most aggressive breast cancer subtype with no validated targeted therapy and a high relapse rate. MDA-MB-231 TNBC cells were grown in scaffolds from two different PLA concentrations (12% and 15% w/v). The appropriateness of ES-PLA scaffolds was evaluated using a cell proliferation assay. EGFR and STAT3 gene expression and protein levels were compared in cells grown in 2D versus in 3D cultures. An increase in STAT3 activation was shown, which is related to self-renewal of cancer stem cells (CSCs). Therefore, the enrichment of the breast CSC (BCSC) population was tested using a mammosphere-forming assay and gene expression of BCSC-related stemness and epithelial-to-mesenchymal transition markers. Based on the results obtained, ES-PLA scaffolds are useful for 3D cultures in short culture periods with no BCSC-enrichment.

Metastatic Tumor-in-a-Dish, a Novel Multicellular Organoid to Study Lung Colonization and Predict Therapeutic Response

Metastasis is a major cause of cancer-related deaths. A dearth of preclinical models that recapitulate the metastatic microenvironment has impeded the development of therapeutic agents that are effective against metastatic disease. Because the majority of solid tumors metastasize to the lung, we developed a multicellular lung organoid that mimics the lung microenvironment with air sac-like structures and production of lung surfactant protein. We used these cultures, called primitive lung-in-a-dish (PLiD), to recreate metastatic disease using primary and established cancer cells. The metastatic tumor-in-a-dish (mTiD) cultures resemble the architecture of metastatic tumors in the lung, including angiogenesis. Pretreating PLiD with tumor exosomes enhanced cancer cell colonization. We next tested the response of primary and established cancer cells to current chemotherapeutic agents and an anti-VEGF antibody in mTiD against cancer cells in two-dimensional (2D) or 3D cultures. The response of primary patient-derived colon and ovarian tumor cells to therapy in mTiD cultures matched the response of the patient in the clinic, but not in 2D or single-cell-type 3D cultures. The sensitive mTiD cultures also produced significantly lower circulating markers for cancer similar to that seen in patients who responded to therapy. Thus, we have developed a novel method for lung colonization in vitro, a final stage in tumor metastasis. Moreover, the technique has significant utility in precision/personalized medicine, wherein this phenotypic screen can be coupled with current DNA pharmacogenetics to identify the ideal therapeutic agent, thereby increasing the probability of response to treatment while reducing unnecessary side effects. SIGNIFICANCE: A lung organoid that exhibits characteristics of a normal human lung is developed to study the biology of metastatic disease and therapeutic intervention.

Mechanobiology of Cancer Stem Cells and Their Niche

Though the existence of cancer stem cells remained enigmatic initially, over the time their participation in tumorigenesis and tumor progression has become highly evident. Today, they are also appreciated as the causal element for tumor heterogeneity and drug-resistance. Cancer stem cells activate a set of molecular pathways some of which are triggered by the unique mechanical properties of the tumor tissue stroma. A relatively new field called mechanobiology has emerged, which aims to critically evaluate the mechanical properties associated with biological events like tissue morphogenesis, cell-cell or cell-matrix interactions, cellular migration and also the development and progression of cancer. Development of more realistic model systems and biophysical instrumentation for observation and manipulation of cell-dynamics in real-time has invoked a hope for some novel therapeutic modalities against cancer in the future. This review discusses the fundamental concepts of cancer stem cells from an intriguing viewpoint of mechanobiology and some important breakthroughs to date.

Drug resistance profiling of a new triple negative breast cancer patient-derived xenograft model

Background

Triple-negative breast cancer (TNBC) represents an aggressive subtype with limited therapeutic options. Experimental preclinical models that recapitulate their tumors of origin can accelerate target identification, thereby potentially improving therapeutic efficacy. Patient-derived xenografts (PDXs), due to their genomic and transcriptomic fidelity to the tumors from which they are derived, are poised to improve the preclinical testing of drug-target combinations in translational models. Despite the previous development of breast and TNBC PDX models, those derived from patients with demonstrated health-disparities are lacking.

Methods

We use an aggressive TNBC PDX model propagated in SCID/Beige mice that was established from an African-American woman, TU-BcX-2 K1, and assess its metastatic potential and drug sensitivities under distinct in vitro conditions. Cellular derivatives of the primary tumor or the PDX were grown in 2D culture conditions or grown in mammospheres 3D culture. Flow cytometry and fluorescence staining was used to quantify cancer stem cell-like populations. qRT-PCR was used to describe the mesenchymal gene signature of the tumor. The sensitivity of TU-BcX-2 K1-derived cells to anti-neoplastic oncology drugs was compared in adherent cells and mammospheres. Drug response was evaluated using a live/dead staining kit and crystal violet staining.

Results

TU-BcX-2 K1 has a low propensity for metastasis, reflects a mesenchymal state, and contains a large burden of cancer stem cells. We show that TU-BcX-2 K1 cells have differential responses to cytotoxic and targeted therapies in 2D compared to 3D culture conditions insofar as several drug classes conferred sensitivity in 2D but not in 3D culture, or cells grown as mammospheres.

Conclusions

Here we introduce a new TNBC PDX model and demonstrate the differences in evaluating drug sensitivity in adherent cells compared to mammosphere, or suspension, culture.

Electronic supplementary material

The online version of this article (10.1186/s12885-019-5401-2) contains supplementary material, which is available to authorized users.

3D models of the bone marrow in health and disease: yesterday, today and tomorrow

The complex interaction between hematopoietic stem cells (HSCs) and their microenvironment in the human bone marrow ensures a life-long blood production by balancing stem cell maintenance and differentiation. This so-called HSC niche can be disturbed by malignant diseases. Investigating their consequences on hematopoiesis requires deep understanding of how the niches function in health and disease. To facilitate this, biomimetic models of the bone marrow are needed to analyse HSC maintenance and hematopoiesis under steady-state and diseased conditions. Here, 3D bone marrow models, their fabrication methods (including 3D bioprinting) and implementations recapturing bone marrow functions in health and diseases, are presented.