Strategies to improve chitosan hemocompatibility: A review

Mesoporous Silica Nanoparticles-Encapsulated Agarose and Heparin as Anticoagulant and Resisting Bacterial Adhesion Coating for Biomedical Silicone

Silicone catheter has been widely used in peritoneal dialysis. The research missions of improving blood compatibility and the ability of resisting bacterial adhesion of silicone catheter have been implemented for the biomedical requirements. However, most of modification methods of surface modification were only able to develop the blood-contacting biomaterials with good hemocompatibility. It is difficult for the biomaterials to resist bacterial adhesion. Here, agarose was selected to resist bacterial adhesion, and heparin was chosen to improve hemocompatibility of materials. Both of them were loaded into mesoporous silica nanoparticles (MSNs), which were successfully modified on the silicone film surface via electrostatic interaction. Structures of the mesoporous coatings were characterized in detail by dynamic light scattering, transmission electron microscopy, Brunauer-Emmett-Teller surface area, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscope, and water contact angle. Platelet adhesion and aggregation, whole blood contact test, hemolysis and related morphology test of red blood cells, in vitro clotting time tests, and bacterial adhesion assay were performed to evaluate the anticoagulant effect and the ability of resisting bacterial adhesion of the modified silicone films. Results indicated that silicone films modified by MSNs had a good anticoagulant effect and could resist bacterial adhesion. The modified silicone films have potential as blood-contacting biomaterials that were attributed to their biomedical properties.

The use of Eucalyptus staigeriana nanoemulsion for control of sheep haemonchosis

ABSTRACT: Sustainable control of gastrointestinal nematodes (GIN) in small ruminants has been based on the use of alternative methods, including targeted selective treatment, such as FAMACHA. Another GIN control alternative is the use of herbal medicines, although in many cases their use is based on empirical knowledge. Biopolymer nanoformulations has been investigated to maximize the essential oil effects against sheep gastrointestinal nematodes. The aim of the present study was to combine a Eucalyptus staigeriana essential oil nanoemulsion (EsNano) with FAMACHA as an alternative control for sheep haemonchosis. The study was performed over six months at a commercial sheep farm located in a semiarid region of Northeast Brazil. Initially, a fecal egg count reduction test (FECRT) in sheep with levamisole, ivermectin and oxfendazole in sheep was performed used to determine the most effective anthelmintic to use as the positive control. Levamisole has been selected because it showed efficacy superior to 95%. EsNano was obtained and then its physicochemical properties were characterized. The average (±SE) size of the particles in the nanoemulsion was 276.8 (±12.3) nm with bimodal distribution and polydispersity. Nine visits were performed, from April to September 2013, with an interval of 17 days. One hundred sixty-two male and female sheep were divided into three groups (n=54 each) and were treated when FAMACHA score was 3, 4, or 5: G-EsNano 250mg kg-1 EsNano; G-Lev 7.5mg kg-1 levamisole (positive control), and G-Neg was not treated (negative control). Feces from sheep were collected to quantify the number of eggs per gram of feces (epg) and to identify nematode genera. Sheep weight gain was monitored. The epg data for each group and the average sheep weight gains were analyzed by variance analysis and compared with the Tukey’s test (P<0.05). Significant difference between the number of animals treated with EsNano and levamisole was not observed in any visit (P>0.05). The epg variation was similar in the G-EsNano and G-Lev groups on visits (P>0.05), except the second and fifth evaluation in the epg groups were significantly different (P<0.05). Haemonchus spp. was the most prevalent nematode. There was no significant weight gain in any of the treated groups (P<0.05). The combination of phytotherapy and FAMACHA can be an alternative to minimize the use of synthetic anthelmintics to control resistant GIN populations of small ruminants.

Construction of blood compatible lysine-immobilized chitin/carbon nanotube microspheres and potential applications for blood purified therapy

Novel lysine-immobilized chitin/carbon nanotube microspheres are prepared with excellent bilirubin adsorption properties and good blood compatibility for blood purified therapy.

Direct catechol conjugation of mussel-inspired biomacromolecule coatings to polymeric membranes with antifouling properties, anticoagulant activity and cytocompatibility

TheO-sulfated chitosan andN,O-sulfated chitosan coatings were prepared by direct catechol conjugation to enrich the biological applications of polymeric membranes.

Co-assembly of chitosan and phospholipids into hybrid hydrogels

Novel hybrid hydrogels were formed by adding chitosan (Ch) to phospholipids (P) self-assembled particles in lactic acid. The effect of the phospholipid concentration on the hydrogel properties was investigated and was observed to affect the rate of hydrogel formation and viscoelastic properties. A lower concentration of phospholipids (0.5% wt/v) in the mixture, facilitates faster network formation as observed by Dynamic Light Scattering, with lower elastic modulus than the hydrogels formed with higher phospholipid content. The nano-porous structure of Ch/P hydrogels, with a diameter of 260±20 nm, as observed by cryo-scanning electron microscopy, facilitated the penetration of water and swelling. Cell studies revealed suitable biocompatibility of the Ch/P hydrogels that can be used within life sciences applications.

Preparation and characterization of novel Ag doped hydroxyapatite–Fe3O4–chitosan hybrid composites and in vitro biological evaluations for orthopaedic applications

Graphical abstract of novel 5%@Ag:HAP–Fe₃O₄–CS hybrid composites and biological investigations.

Development and Characterization of Novel Films Based on Sulfonamide-Chitosan Derivatives for Potential Wound Dressing

The objective of this study was to develop new films based on chitosan functionalized with sulfonamide drugs (sulfametoxydiazine, sulfadiazine, sulfadimetho-xine, sulfamethoxazol, sulfamerazine, sulfizoxazol) in order to enhance the biological effects of chitosan. The morphology and physical properties of functionalized chitosan films as well the antioxidant effects of sulfonamide-chitosan derivatives were investigated. The chitosan-derivative films showed a rough surface and hydrophilic properties, which are very important features for their use as a wound dressing. The film based on chitosan-sulfisoxazol (CS-S6) showed the highest swelling ratio (197%) and the highest biodegradation rate (63.04%) in comparison to chitosan film for which the swelling ratio was 190% and biodegradation rate was only 10%. Referring to the antioxidant effects the most active was chitosan-sulfamerazine (CS-S5) which was 8.3 times more active than chitosan related to DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging ability. This compound showed also a good ferric reducing power and improved total antioxidant capacity.

Chitosan-PLGA polymer blends as coatings for hydroxyapatite nanoparticles and their effect on antimicrobial properties, osteoconductivity and regeneration of osseous tissues

Composite biomaterials comprising nanostructured hydroxyapatite (HAp) have an enormous potential for natural bone tissue reparation, filling and augmentation. Chitosan (Ch) as a naturally derived polymer has many physicochemical and biological properties that make it an attractive material for use in bone tissue engineering. On the other hand, poly-D,L-lactide-co-glycolide (PLGA) is a synthetic polymer with a long history of use in sustained drug delivery and tissue engineering. However, while chitosan can disrupt the cell membrane integrity and may induce blood thrombosis, PLGA releases acidic byproducts that may cause tissue inflammation and interfere with the healing process. One of the strategies to improve the biocompatibility of Ch and PLGA is to combine them with compounds that exhibit complementary properties. In this study we present the synthesis and characterization, as well as in vitro and in vivo analyses of a nanoparticulate form of HAp coated with two different polymeric systems: (a) Ch and (b) a Ch-PLGA polymer blend. Solvent/non-solvent precipitation and freeze-drying were used for synthesis and processing, respectively, whereas thermogravimetry coupled with mass spectrometry was used for phase identification purposes in the coating process. HAp/Ch composite particles exhibited the highest antimicrobial activity against all four microbial strains tested in this work, but after the reconstruction of the bone defect they also caused inflammatory reactions in the newly formed tissue where the defect had lain. Coating HAp with a polymeric blend composed of Ch and PLGA led to a decrease in the reactivity and antimicrobial activity of the composite particles, but also to an increase in the quality of the newly formed bone tissue in the reconstructed defect area.

Bone regeneration by nanohydroxyapatite/chitosan/poly(lactide-co-glycolide) scaffolds seeded with human umbilical cord mesenchymal stem cells in the calvarial defects of the nude mice

In the preliminary study, we have found an excellent osteogenic property of nanohydroxyapatite/chitosan/poly(lactide-co-glycolide) (nHA/CS/PLGA) scaffolds seeded with human umbilical cord mesenchymal stem cells (hUCMSCs) in vitro and subcutaneously in the nude mice. The aim of this study was to further evaluate the osteogenic capacity of nHA/CS/PLGA scaffolds seeded with hUCMSCs in the calvarial defects of the nude mice. Totally 108 nude mice were included and divided into 6 groups: PLGA scaffolds + hUCMSCs; nHA/PLGA scaffolds + hUCMSCs; CS/PLGA scaffolds + hUCMSCs; nHA/CS/PLGA scaffolds + hUCMSCs; nHA/CS/PLGA scaffolds without seeding; the control group (no scaffolds) (n = 18). The scaffolds were implanted into the calvarial defects of nude mice. The amount of new bones was evaluated by fluorescence labeling, H&E staining, and Van Gieson staining at 4 and 8 weeks, respectively. The results demonstrated that the amount of new bones was significantly increased in the group of nHA/CS/PLGA scaffolds seeded with hUCMSCs (p < 0.01). On the basis of previous studies in vitro and in subcutaneous implantation of the nude mice, the results revealed that the nHA and CS also enhanced the bone regeneration by nHA/CS/PLGA scaffolds seeded with hUCMSCs in the calvarial defects of the nude mice at early stage.

Enabling non-invasive assessment of an engineered endothelium on ePTFE vascular grafts without increasing oxidative stress

Magnetic resonance imaging (MRI) in combination with contrast enhancement is a potentially powerful tool to non-invasively monitor cell distribution in tissue engineering and regenerative medicine. The most commonly used contrast agent for cell labeling is super paramagnetic iron oxide nanoparticles (SPIONs). However, uptake of SPIONs triggers the production of reactive oxygen species (ROS) in cells often leading to a pro-inflammatory phenotype. The objective of this study was to develop a labeling system to non-invasively visualize an engineered endothelium in vascular grafts without creating excessive oxidative stress. Specifically, we investigated: (1) chitosan-coated SPIONs (CSPIONs) as an antioxidant contrast agent for contrast enhancement, and (2) poly(1,8-octamethylene citrate) (POC) as an antioxidant interface to support cell adhesion and function of labeled cells on the vascular graft. While SPION-labeled endothelial cells (ECs) experienced elevated ROS formation and altered cell morphology, CSPION-labeled ECs cultured on POC-coated surfaces mitigated SPION-induced ROS formation and maintained EC morphology, phenotype, viability and functions. A monolayer of labeled ECs exhibited sufficient contrast with T2-weighed MR imaging. CSPION labeling of endothelial cells in combination with coating the graft wall with POC allows non-invasive monitoring of an engineered endothelium on ePTFE grafts without increasing oxidative stress.

In vitro effects of Eucalyptus staigeriana nanoemulsion on Haemonchus contortus and toxicity in rodents

Strategies for controlling gastrointestinal nematodes have been developed based on the use of numerous alternative methods, including the use of phytotherapy. New formulations of essential oils with anthelmintic activity have been proposed as a means to optimize their biological effects. Thus, the objective of this study was to formulate a nanoemulsion to optimize the nematicide effect of Eucalyptus staigeriana essential oil (EsEO). Initially, physico-chemical analyses were performed to verify the stability of the E. staigeriana nanoemulsion (EsNano). In vitro tests were conducted to evaluate the ovicidal and larvicidal activities of both EsNano and EsEO against Haemonchus contortus, and toxicology tests were then performed on rodents. The EsEO content in the nanoemulsion was 36.4% (v/v), and the mean particle size was 274.3 nm. EsNano and EsEO inhibited larval hatching by 99% and 96.3% at 1 and 2mg/ml concentrations, respectively, and inhibited larval development by 96.3% and 97.3% at 8 mg/ml concentrations. The acute toxicity test revealed that the EsNano and EsEO doses required to kill 50% of the mice (LD50) were 1,603.9 and 3,495.9 mg/ml, respectively. EsNano did not alter the hematological parameters in the rats after treatment.

Chitin and chitosan from Brazilian Atlantic Coast: Isolation, characterization and antibacterial activity

Chitin and chitosan were obtained by chemical treatments of shrimp shells. Different particle sizes (50-1000 μm) of the raw material were used to study their effect on size distribution, demineralization, deproteinization and deacetylation of chitin and chitosan isolation process. The particle size in the range of 800-1000 μm was selected to isolate chitin, which was achieved by measuring nitrogen, protein, ash, and yield %. Hydrochloric acid (5%, v/v) was optimized in demineralization step to remove the minerals from the starting material. Aqueous solution of sodium hydroxide (5%, w/v) at 90 °C for (20 h) was used in deproteinization step to remove the protein. Pure chitin was consequently impregnated into high concentration of sodium hydroxide (50%) for 3.5 h at 90 °C to remove the acetyl groups in order to form high pure chitosan. The degree of deacetylation (DDA) of chitosan was controlled and evaluated by different analytical tools. The chemical structure of chitin and chitosan was confirmed by elemental analysis, ATR-FTIR, H/C NMR, XRD, SEM, UV-Vis spectroscopy, TGA, and acid-base titration. The isolated chitin and chitosan from shrimp shell showed excellent antibacterial activity against Gram (-ve) bacteria (Escherichia coli) comparing with commercial biopolymers.

In vitro study of partially hydrolyzed poly(2-ethyl-2-oxazolines) as materials for biomedical applications

Polymers based on 2-oxazoline, such as poly(2-ethyl-2-oxazolines) (PETOx), are considered to be a type of 'pseudopeptide' with the ability to form novel biomaterials. The hydrolysis of PETOx was carried out to evaluate its use in biomedical applications. In the present work, PETOx samples with a range of molar masses were prepared by living cationic polymerization. Hydrolysis was carried out at time intervals ranging from 15 to 180 min to prepare copolymers with different amounts of ethylene imine units. (1)H NMR spectroscopy was used to identify the structure of the hydrolyzed polymers. The dependence of in vitro cell viability on the degree of hydrolysis was determined using three different model cell lines, namely, mouse embryonic 3T3 fibroblasts, pancreatic βTC3 cells, and mouse lymphoid macrophages P388.D1. It was demonstrated that increasing the degree of hydrolysis decreased cell viability for all cell types. Fibroblast cells displayed the highest tolerance; additionally, the effect of polymer size showed no observable significance. Macrophage cells, immune system representatives, displayed the highest sensitivity to contact with hydrolyzed PETOx. The effect of polymer hydrolysis, polymer concentration and the incubation time on cell viability was experimentally observed. Confocal laser-scanning microscopy provided evidence of cellular uptake of pyrene-labeled (co)polymers.

Highly flexible heparin-modified chitosan/graphene oxide hybrid hydrogel as a super bilirubin adsorbent with excellent hemocompatibility

A highly flexible heparin-modified chitosan/graphene oxide hydrogel was prepared using lyophilization–neutralization–modification as a blood-compatible adsorbent for bilirubin removal.

Exploiting fungal cell wall components in vaccines

Innate recognition of fungi leads to strong adaptive immunity. Investigators are trying to exploit this observation in vaccine development by combining antigens with evolutionarily conserved fungal cell wall carbohydrates to induce protective responses. Best studied is β-1,3-glucan, a glycan that activates complement and is recognized by dectin-1. Administration of antigens in association with β-1,3-glucan, either by direct conjugation or complexed in glucan particles, results in robust humoral and cellular immune responses. While the host has a host of mannose receptors, responses to fungal mannoproteins generally are amplified if cells are cooperatively stimulated with an additional danger signal such as a toll-like receptor agonist. Chitosan, a polycationic homopolymer of glucosamine manufactured by the deacetylation of chitin, is being studied as an adjuvant in DNA and protein-based vaccines. It appears particularly promising in mucosal vaccines. Finally, universal and organism-specific fungal vaccines have been formulated by conjugating fungal cell wall glycans to carrier proteins. A major challenge will be to advance these experimental findings so that at risk patients can be protected.

Preparation and antibacterial activity of quaternized chitosan with iodine

Chitosan (CTS) is a natural polymer with active groups such as -NH2 which can be functionalized to introduce new positively charged N-atoms and protonated amino group for better use. In this study, to improve the stability of iodine, a novel complex (CTS-CTA-I2) was prepared by mixing N-(2-hydroxy) propyl-3-trimethylammonium chitosan chloride (CTS-CTA) with iodine in ethanol solution. The CTS-CTA-I2 was characterized by Fourier transform infrared spectra (FTIR), Ultraviolet and visible (UV-vis) spectra and thermal gravimetric analysis (TG). Besides, the interaction of iodine with CTS-CTA was also studied. The mole ratio of CTS-CTA with iodine was measured by iodometric titration method and the max mole ratio of CTS-CTA with iodine was 1:1.33. The antimicrobial activity of CTS, CTS-CTA and CTS-CTS-I2 complexes was investigated against Escherichia coli and Staphylococcus aureus and the antibacterial property of CTS-CTA-I2 was superior to CTS-CTA.