Lipid nanoparticles (SLN, NLC) in cosmetic and pharmaceutical dermal products

Modification and Functionalization of Zeolites for Curcumin Uptake

This work shows that hierarchical zeolites are promising systems for the delivery of biologically relevant hydrophobic substances, such as curcumin. The validity of using piperine as a promoter of curcumin adsorption was also evaluated. The use of pure curcumin is not medically applicable due to its low bioavailability and poor water solubility. To improve the undesirable properties of curcumin, special carriers are used to overcome these shortcomings. Hierarchical zeolites possessing secondary mesoporosity are used as pharmaceutical carrier systems for encapsulating active substances with low water solubility. This porosity facilitates access of larger reagent molecules to the active sites of the material, preserving desirable adsorption properties, acidity, and crystallinity of zeolites. In this work, methods are proposed to synthesize hierarchical zeolites based on a commercial FAU-type zeolite. Studies on the application and adsorption kinetics of curcumin using commercial FAU-type zeolite and hierarchical zeolites based on commercial FAU-type zeolite are also included.

Benzo[k,l]xanthene Lignan-Loaded Solid Lipid Nanoparticles for Topical Application: A Preliminary Study

Skin is the first human barrier that is daily exposed to a broad spectrum of physical and chemical agents, which can increase reactive oxygen species (ROS) and lead to the formation of topical disorders. Antioxidant molecules, such as benzo[k,l]xanthene lignans (BXL), are ideal candidates to eliminate or minimize the effects of ROS. Herein, we aimed to formulate BXL-loaded solid lipid nanoparticles (SLN-BXL) to improve the bioavailability and interaction with the skin, and also to investigate the protective impact against intracellular ROS generation in HFF-1 in comparison with the drug-free situation. SLN-BXL were formulated using the PIT/ultrasonication method, and then were subjected to physicochemical characterizations, i.e., average size, zeta potential (ZP), polydispersity index (PDI), encapsulation efficiency (%EE), thermotropic behavior, and interaction with a biomembrane model. The results show a mean size around 200 nm, PDI of 0.2, and zeta potential of about -28 mV, with values almost unchanged over a period of three months, while the EE% is ≈70%. Moreover, SLN-BXL are able to deeply interact with the biomembrane model, and to achieve a double-action release in mildly hydrophobic matrices; the results of the in vitro experiments confirm that SLN-BXL are cell-safe and capable of attenuating the IL-2-induced high ROS levels. In conclusion, based on our findings, the formulation can be proposed as a candidate for a preventive remedy against skin disorders induced by increased levels of ROS.

Review on the Scale-Up Methods for the Preparation of Solid Lipid Nanoparticles

Solid lipid nanoparticles (SLNs) are an alternate carrier system to liposomes, polymeric nanoparticles, and inorganic carriers. SLNs have attracted increasing attention in recent years for delivering drugs, nucleic acids, proteins, peptides, nutraceuticals, and cosmetics. These nanocarriers have attracted industrial attention due to their ease of preparation, physicochemical stability, and scalability. These characteristics make SLNs attractive for manufacture on a large scale. Currently, several products with SLNs are in clinical trials, and there is a high possibility that SLN carriers will quickly increase their presence in the market. A large-scale manufacturing unit is required for commercial applications to prepare enough formulations for clinical studies. Furthermore, continuous processing is becoming more popular in the pharmaceutical sector to reduce product batch-to-batch differences. This review paper discusses some conventional methods and the rationale for large-scale production. It further covers recent progress in scale-up methods for the synthesis of SLNs, including high-pressure homogenization (HPH), hot melt extrusion coupled with HPH, microchannels, nanoprecipitation using static mixers, and microemulsion-based methods. These scale-up technologies enable the possibility of commercialization of SLNs. Furthermore, ongoing studies indicate that these technologies will eventually reach the pharmaceutical market.

The Proteolytic Landscape of Ovarian Cancer: Applications in Nanomedicine

Ovarian cancer (OvCa) is one of the leading causes of mortality globally with an overall 5-year survival of 47%. The predominant subtype of OvCa is epithelial carcinoma, which can be highly aggressive. This review launches with a summary of the clinical features of OvCa, including staging and current techniques for diagnosis and therapy. Further, the important role of proteases in OvCa progression and dissemination is described. Proteases contribute to tumor angiogenesis, remodeling of extracellular matrix, migration and invasion, major processes in OvCa pathology. Multiple proteases, such as metalloproteinases, trypsin, cathepsin and others, are overexpressed in the tumor tissue. Presence of these catabolic enzymes in OvCa tissue can be exploited for improving early diagnosis and therapeutic options in advanced cases. Nanomedicine, being on the interface of molecular and cellular scales, can be designed to be activated by proteases in the OvCa microenvironment. Various types of protease-enabled nanomedicines are described and the studies that focus on their diagnostic, therapeutic and theranostic potential are reviewed.

Drug-Loaded Nanocarriers Composed of Cholesteryl Oleate Crystal Cores and Multiple-Nanosheet Shells of γ-Cyclodextrin Inclusion Complex Crystals

In this study, we prepared drug-loaded nanocarriers made of cholesteryl oleate (ChO) and γ-cyclodextrin (γ-CD). A nanosuspension (nanosuspension-I, NS-I) containing nanoparticles with a mean size of approximately 170 nm was obtained through the solvent-diffusion method using ethanol. A second nanosuspension (nanosuspension-II, NS-II), which was prepared by freeze-drying and redispersion of NS-I, exhibited an increased particle size of approximately 210 nm. Cryogenic transmission electron microscopy (cryo-TEM) and atomic force microscopy (AFM) force-distance curves indicated that the nanoparticles in NS-I were oblong and soft. However, those in NS-II were angular and stiff, and, interestingly, multiple nanosheets covered the solid-liquid interface. Synchrotron wide-angle X-ray diffraction (WAXD) analysis of NS-II indicated that the nanoparticles in it had a core-shell structure, where the ChO crystal in the inner core was covered by multiple nanosheets of ChO/γ-CD inclusion complex crystals. The X-ray peak analysis suggested that the γ-CD columns of the nanosheets were vertically stacked onto the ChO crystal interface. It was found that the nanosheets on the nanoparticle interface were formed during the freezing process. A model drug carbamazepine (CBZ) was loaded into the ChO/γ-CD nanoparticles by pre-dissolving CBZ in ethanol during the solvent-diffusion process. Cryo-TEM, ¹H NMR, ζ-potentials, and synchrotron WAXD indicated that CBZ was unexpectedly loaded into the shell as a CBZ/γ-CD inclusion complex crystalline nanosheet. The specific nanosheet structure, where ChO and CBZ coexisted in the same crystal of γ-CD, could achieve CBZ loading in the nanoparticles. ChO/γ-CD nanoparticles with the unique core-shell structure are expected to perform as practical carriers for drug delivery.

Nanostructured Lipid Carriers Loaded with Dexamethasone Prevent Inflammatory Responses in Primary Non-Parenchymal Liver Cells

Liver inflammation represents a major clinical problem in a wide range of pathologies. Among the strategies to prevent liver failure, dexamethasone (DXM) has been widely used to suppress inflammatory responses. The use of nanocarriers for encapsulation and sustained release of glucocorticoids to liver cells could provide a solution to prevent severe side effects associated with systemic delivery as the conventional treatment regime. Here we describe a nanostructured lipid carrier developed to efficiently encapsulate and release DXM. This nano-formulation proved to be stable over time, did not interact in vitro with plasma opsonins, and was well tolerated by primary non-parenchymal liver cells (NPCs). Released DXM preserved its pharmacological activity, as evidenced by inducing robust anti-inflammatory responses in NPCs. Taken together, nanostructured lipid carriers may constitute a reliable platform for the delivery of DXM to treat pathologies associated with chronic liver inflammation.

Finasteride-loaded nano-lipidic carriers for follicular drug delivery: preformulation screening and Box-Behnken experimental design for optimization of variables

Finasteride (FIN), a 5-α reductase enzyme inhibitor is mainly used orally for the treatment of androgenic alopecia and benign prostate hyperplasia. The present study was undertaken for systematic optimization and assessment of the designed nanostructured lipid carriers (NLC) to enhance follicular delivery of FIN by topical administration. The NLCs were prepared by microemulsion method, by employing a 3³ Box-Behnken design and subsequently confirmed by ANOVA analysis. Compritol ATO-888 and Fenugreek oil were selected as the solid lipid and liquid lipid respectively for the fabrication of NLCs. The formulations were characterized for particle size, zeta potential, entrapment efficiency, storage stability and in vitro drug release profile. Morphological profile of the NLCs nanocarriers was studied by transmission electron microscopy (TEM). The Fourier Transform Infrared Spectroscopy (FT-IR) spectrum and differential scanning calorimetry (DSC) thermogram demonstrated that FIN entrapment within NLCs was devoid of chemical interaction with the components. The prepared NLCs had satisfactory particle dimensions, zeta potential and entrapment efficiency. The numerical optimization process indicated the optimal NLC composition with 3 mg of SPC, 6 mg lipid and 5 mg of drug. NLCs loaded with FIN had acceptable particle size at 379.8 nm, zeta potential of −37.1 mV and an entrapment efficiency of 84%. Transmission electron microscopy indicated the spherical morphology. In vitro release profile indicated a fast initial release and subsequently a prolonged release of FIN from the carrier for 24 h. The release kinetics data displayed a Higuchi diffusion release model with the best match R² value (0.848). Short-term stability tests conducted over 4 weeks at 6° and 25 °C demonstrated that the formulation could retain their initial properties during the test period.

Silibinin-loaded nanostructured lipid carriers (NLCs) ameliorated cognitive deficits and oxidative damages in aluminum chloride-induced neurotoxicity in male mice

Aluminum chloride (AlCl3) and its accumulation in the brain are associated with neurodegenerative disease. Recent investigations have illustrated that silibinin is known to have neuroprotective properties. The present study investigates the neuroprotective effects of silibinin-loaded nanostructured lipid carriers (Sili-NLCs) against AlCl3-induced neurotoxicity in male mice. Sili-NLCs were prepared using the emulsification-solvent evaporation method and subjected to particle size, zeta potential, and entrapment efficiency (% EE) analysis. Mice were treated with AlCl3 (100 mg/kg/day, p.o.) and with the same concentration of silibinin and Sili-NLCs (50,100, and 200 mg/kg/day, p.o.) for 30 days in different groups. After treating animals, behavioral studies were assessed. Also, the brain tissue samples were collected from all mice to evaluate oxidative damage and histological changes. The particle size, polydispersity index, zeta potential, and entrapment efficiency (% EE) of prepared Sili-NLCs found 239.7 ± 4.04 nm, 0.082 ± 0.003, - 16.33 ± 0.15 mV, and 72.65 ± 2.03 %, respectively. Brain uptake studies showed that Sili-NLCs had a 5.7-fold greater uptake in the mice brain than the free drug. The AlCl3 caused significant cognitive impairment and increased the level of lipid peroxidation accompanied by decreasing antioxidant enzyme activity in the brain tissue. These findings correlated well with the histopathological experiments. Furthermore, treatment with Sili-NLCs significantly improved the AlCl3-induced cognitive impairment, neurochemical anomalies, and histopathological changes. Given these results, silibinin, when delivered using NLCs, is potentially more effective than free silibinin in decreasing AlCl3- induced neurotoxicity.

Chitosan-coated nanostructured lipid carriers for transdermal delivery of tetrahydrocurcumin for breast cancer therapy

Chitosan (Ch)-coated nanostructured lipid carriers (NLCs) have great potential for transdermal delivery with high localization of chemotherapeutics in breast cancer. This study used tetrahydrocurcumin (THC), a primary metabolite of curcumin with enhanced antioxidant and anticancer properties, as a model compound to prepare NLCs. Response surface methodology was employed to optimize THC-loaded Ch-coated NLCs (THC-Ch-NLCs) fabricated by high-shear homogenization. The optimized THC-Ch-NLCs had particle size of 244 ± 18 nm, zeta potential of -17.5 ± 0.5 mV, entrapment efficiency of 76.6 ± 0.2% and drug loading of 0.28 ± 0.01%. In vitro release study of THC-Ch-NLCs showed sustained release following the Korsmeyer-Peppas model with Fickian and non-Fickian diffusion at pH 7.4 and 5.5, respectively. THC-Ch-NLCs demonstrated significantly enhanced in vitro skin permeation, cell uptake, and remarkable cytotoxicity toward MD-MBA-231 breast cancer cells compared to the unencapsulated THC, suggesting Ch-NLCs as potential transdermal nanocarriers of THC for triple-negative breast cancer treatment.

Emerging trends of nanotechnology in advanced cosmetics

The cosmetic industry is dynamic and ever-evolving. Especially with the introduction and incorporation of nanotechnology-based approaches into cosmetics for evincing novel formulations that confers aesthetic as well as therapeutic benefits. Nanocosmetics acts via numerous delivery mechanisms which involves lipid nanocarrier systems, polymeric or metallic nanoparticles, nanocapsules, dendrimers, nanosponges,etc. Each of these, have particular characteristic properties, which facilitates increased drug loading, enhanced absorption, better cosmetic efficacy, and many more. This article discusses the different classes of nanotechnology-based cosmetics and the nanomaterials used for their formulation, followed by outlining the categories of nanocosmetics and the scope of their utility pertaining to skin, hair, nail, lip, and/or dental care and protection thereof. This review also highlights and discusses about the key drivers of the cosmetic industry and the impending need of corroborating a healthy regulatory framework, refocusing attention towards consumer needs and trends, inculcating sustainable techniques and tenets of green ecological principles, and lastly making strides in nano-technological advancements which will further propel the growth of the cosmetic industry.

A Mini-Review on Solid Lipid Nanoparticles and Nanostructured Lipid Carriers: Topical Delivery of Phytochemicals for the Treatment of Acne Vulgaris

Acne vulgaris (acne) is one of the most common dermatological problems affecting adolescents and young adults. Although acne may not lead to serious medical complications, its psychosocial effects are tremendous and scientifically proven. The first-line treatment for acne is topical medications composed of synthetic compounds, which usually cause skin irritation, dryness and itch. Therefore, naturally occurring constituents from plants (phytochemicals), which are generally regarded as safe, have received much attention as an alternative source of treatment. However, the degradation of phytochemicals under high temperature, light and oxygen, and their poor penetration across the skin barrier limit their application in dermatology. Encapsulation in lipid nanoparticles is one of the strategies commonly used to deliver drugs and phytochemicals because it allows appropriate concentrations of these substances to be delivered to the site of action with minimal side effects. Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) are promising delivery systems developed from the combination of lipid and emulsifier. They have numerous advantages that include biocompatibility and biodegradability of lipid materials, enhancement of drug solubility and stability, ease of modulation of drug release, ease of scale-up, feasibility of incorporation of both hydrophilic and lipophilic drugs and occlusive moisturization, which make them very attractive carriers for delivery of bioactive compounds for treating skin ailments such as acne. In this review, the concepts of SLNs and NLCs, methods of preparation, characterization, and their application in the encapsulation of anti-acne phytochemicals will be discussed.

Technologies for Solubility, Dissolution and Permeation Enhancement of Natural Compounds

The current review is based on the advancements in the field of natural therapeutic agents which could be utilized for a variety of biomedical applications and against various diseases and ailments. In addition, several obstacles have to be circumvented to achieve the desired therapeutic effectiveness, among which limited dissolution and/or solubility and permeability are included. To counteract these issues, several advancements in the field of natural therapeutic substances needed to be addressed. Therefore, in this review, the possible techniques for the dissolution/solubility and permeability improvements have been addressed which could enhance the dissolution and permeability up to several times. In addition, the conventional and modern isolation and purification techniques have been emphasized to achieve the isolation and purification of single or multiple therapeutic constituents with convenience and smarter approaches. Moreover, a brief overview of advanced natural compounds with multiple therapeutic effectiveness have also been anticipated. In brief, enough advancements have been carried out to achieve safe, effective and economic use of natural medicinal agents with improved stability, handling and storage.

Surface Modification of Lipid-Based Nanoparticles

There is a growing interest in the development of lipid-based nanocarriers for multiple purposes, including the recent increase of these nanocarriers as vaccine components during the COVID-19 pandemic. The number of studies that involve the surface modification of nanocarriers to improve their performance (increase the delivery of a therapeutic to its target site with less off-site accumulation) is enormous. The present review aims to provide an overview of various methods associated with lipid nanoparticle grafting, including techniques used to separate grafted nanoparticles from unbound ligands or to characterize grafted nanoparticles. We also provide a critical perspective on the usefulness and true impact of these modifications on overcoming different biological barriers, with our prediction on what to expect in the near future in this field.

Investigation of Cellular Interactions of Lipid-Structured Nanoparticles With Oral Mucosal Epithelial Cells

Lipid-based nanosystems enable intracellular delivery of drugs in the oral cavity for the treatment of local diseases. To rationally design such systems, suitable matrix compositions and particle properties need to be identified, and manufacturing technologies that allow reproducible production have to be applied. This is a prerequisite for the reliable and predictable performance of in-vitro biological studies. Here, we showed that solid lipid nanoparticles (SLN, palmitic acid) and nanostructured lipid carriers (NLC, palmitic acid and oleic acid in different ratios) with a size of 250 nm, a negative zeta potential, and a polydispersity index (PdI) of less than 0.3 can be reproducibly prepared by high-pressure homogenization using quality by design and a predictive model. SLN and NLC were colloidally stable after contact with physiological fluid and did not form agglomerates. The in-vitro studies clearly showed that besides particle size, surface charge and hydrophobicity, matrix composition had a significant effect. More specifically, the addition of the liquid lipid oleic acid increased the cellular uptake capacity without changing the underlying uptake mechanism. Regardless of the matrix composition, caveolin-mediated endocytosis was the major route of uptake, which was confirmed by particle localization in the endoplasmic reticulum. Thus, this work provides useful insights into the optimal composition of lipid carrier systems to enhance the intracellular uptake capacity of drugs into the oral mucosa.

Hybrid Lipid/Clay Carrier Systems Containing Annatto Oil for Topical Formulations

Nanocomposites formed by clay and lipid carriers (NLCs) show a high potential for providing controlled release and specific delivery of bioactive molecules and have recently gained attention in the pharmaceutical sector due to their ability to transport hydrophilic and hydrophobic drugs. Recent studies have recognized the biological activity of the oil of Bixa orellana L. (AO) with regards to its healing, antioxidant, antibacterial, and anti-leishmanial properties. Therefore, the purpose of this study is the preparation and characterization of hybrid systems based on lipid nanocarriers and laponite for the delivery of AO. NLCs were prepared by the fusion-emulsification method, using cetyl palmitate (CP) or myristyl myristate (MM), AO, and Poloxamer 188. The morphology, hydrodynamic diameters, zeta potential (ZP), polydispersity index (PDI), thermal analysis, X-ray diffraction analysis (XRD), viscosity behavior, and cytotoxicity testing of the hybrid systems were performed. The thermal study and X-ray diffraction analyses (XRD) revealed polymorphic structural changes compatible with the amorphization of the material. Rheological assays highlighted a typical pseudoplastic behavior in all systems (MM and CP with LAP). The hybrid systems’ morphology, size diameters, and PDIs were similar, preset spherical and monodisperse structures (≈200 nm; <0.3), without significant change up to sixty days. The ZP values differed from each other, becoming higher with increasing AO concentration. XEDS spectra and elemental X-ray maps show peaks of lipids (organic components, C and O) and inorganic components O, Mg, and Si. All samples showed cell viability above 60%. The results indicated a stable, biocompatible hybrid system that can be an alternative for topical application.

Development of Tea Seed Oil Nanostructured Lipid Carriers and In Vitro Studies on Their Applications in Inducing Human Hair Growth

Synthetic drugs used to treat hair loss cause many side-effects. Natural tea seed oil possesses many activities that can suppress hair loss. However, it is oily and sticky in direct application. In this study, tea seed oil loaded nanostructured lipid carriers (NLC) using Tween 80 (NLC-T), Varisoft 442 (NLC-V), and a combination of both surfactants (NLC-C) was developed. The obtained nanoformulations showed spherical particles in the size range 130–430 nm. Particle size and size distribution of NLC-C and NLC-T after storage at 4, 25, and 40 °C for 90 days were unchanged, indicating their excellent stability. The pH of NLC-T, NLC-V, and NLC-C throughout 90 days remained at 3, 4, and 3.7, respectively. NLC-C showed significantly greater nontoxicity and growth-stimulating effect on human follicle dermal papilla (HFDP) cells than the intact oil. NLC-T and NLC-V could not stimulate cell growth and showed high cytotoxicity. NLC-C showed melting point at 52 ± 0.02 °C and its entrapment efficiency was 96.26 ± 2.26%. The prepared hair serum containing NLC-C showed better spreading throughout the formulation than that containing the intact oil. Using 5% NLC-C showed a 78.8% reduction in firmness of the hair serum while enhancing diffusion efficiency by reducing shear forces up to 81.4%. In conclusion, the developed NLC-C of tea seed oil is an effective alternative in stimulating hair growth. Hair serum containing NLC-C obviously reduces sticky, oily, and greasy feeling after use.

Phospholipid and menthol based nanovesicle impregnated transdermal patch for nutraceutical delivery to diminish folate and iron deficiency

Adequate micronutrient availability is particularly important in women, children and infants. Micronutrient deficiencies are the major cause of maternal and neonatal morbidity. To overcome this, WHO recommends the use of folic acid and iron supplements for reducing anaemia and improving the health of the mother and infants. Oral intake of supplements for nutritional deficiencies are associated with gastric irritation, nausea, constipation and non-patient compliance due to associated taste. In case of absorption deficiency nutrients administered orally pass-through digestive tract unabsorbed. In the present study, we propose transdermal delivery of nutraceuticals to avoid the limitations associated with oral intake. Transdermal delivery has limited use because of the closely packed barrier of the stratum corneum that limits the permeability of molecules across skin. Here, we have used biomimetic nanovesicles impregnated in transdermal patches for delivery of folic acid and iron. Nanovesicles are prepared using an abundant component of cell membrane, phosphatidyl choline and a permeation enhancer. Further these nanovesicles are impregnated onto polyacrylate based transdermal patch.In vitrostudies have shown the ability of nanovesicles to fluidise skin lipids and penetrate into deeper skin.In vivoapplication of transdermal patches gradually increased the systemic concentration of nutraceuticals. Post application of the patch, five-fold increase in plasma folic acid concentration and 1.5-fold increase in plasma iron concertation was achieved in 6 h. Developed nanovesicles were compatible with keratinocytes and fibroblasts as testedin vitroand have the potential to enhance the cellular uptake of molecules. Skin irritation studies on human volunteers have confirmed the safety of nutraceutical loaded nanovesicles. Thus, the developed nutraceutical loaded transdermal patches provide a potential, easy to use platform for micronutrient delivery in infants and mothers.

Shelf life extension of muffins coated with cinnamon and clove oil nanoemulsions

Clove and cinnamon based nanoemulsions (NE) were prepared with different levels of soy lecithin as a surfactant employing ultrasonication treatment. Increase in surfactant levels decreased the particle size (PS), polydispersity index (PDI) and zeta potential in both the NE. Cinnamon and clove based nanoemulsions were optimized at 1.5 and 2.0% SL, respectively based on their PS and PDI value. Nanoemulsions having the highest thermo stability were further selected to coat the muffin samples. NE Coated and uncoated muffins were evaluated for changes in density, moisture content, water activity, weight loss, texture, antioxidant activity, microbial activity and sensory scores during storage. NE coating significantly increased antioxidant activity of muffins by 26.89% (Cinnamon oil NE) and 37.31% (Clove oil NE). Furthermore during storage, coating of NE maintains the texture of the muffins, reduce the weight loss, density and moisture content to a greater extent in comparison to uncoated muffins. Antioxidant activity and total plate count of clove oil NE coated muffins were significantly higher than cinnamon oil NE coated muffins and while both the NE coating also effectively facilitated in extending the shelf life up to 6 days without any quality deterioration, which facilitated their use as a functional ingredient.

Topical nanostructured lipid carriers of alpha-mangostin and resveratrol for synergistic antioxidant activity

BACKGROUND

Nanostructured lipid carriers (NLCs) are interesting lipid-based carrier systems for enhancing the penetration of drugs through the skin after topical administration.

OBJECTIVE

Dual drug-loaded NLCs of alpha-mangostin (M) and resveratrol (R) to enhance antioxidant activity were developed for topical delivery.

METHODS

The efficacy of a combination of M and R was evaluated in terms of the antioxidant activity. M and R were loaded into the NLCs using a high shear homogenization and ultrasonication process. The particle size, zeta potential, and physical properties of the NLCs were observed. The M and R loading efficiency as well as release patterns were examined using Franz diffusion cells. Moreover, the antioxidant efficacy and in vitro cytotoxicity in the normal human fibroblast (NHF) of the NLCs were evaluated as well.

RESULTS

The results found that the combination of M and R offered synergistic antioxidant activity and was successfully loaded into the NLCs with the size of a nanometer and negative zeta potential. The drugs were loaded in the NLCs as molecular dispersions and slowly released from the NLCs. Interestingly, both drugs maintained their antioxidant activity after being loaded into the NLCs and provided a higher antioxidant activity than those in the single loading of M and R, thus demonstrating that the incorporation of M and R into the NLCs allowed an enhanced antioxidant activity. Moreover, a cytotoxicity study showed that the NLCs were safe and had low cytotoxicity on the NHF cells.

CONCLUSION

The M and R loaded NLCs were attractive systems for synergistic antioxidant activity for topical application.

Nanostructured lipid carriers: a promising drug carrier for targeting brain tumours

Background

In recent years, the field of nanotechnology and nanomedicine has transformed the pharmaceutical industry with the development of novel drug delivery systems that overcome the shortcomings of traditional drug delivery systems. Nanostructured lipid carriers (NLCs), also known as the second-generation lipid nanocarriers, are one such efficient and targeted drug delivery system that has gained immense attention all across due to their myriad advantages and applications. Scientific advancements have revolutionized our health system, but still, brain diseases like brain tumour have remained formidable owing to poor prognosis and the challenging drug delivery to the brain tissue. In this review, we highlighted the application and potential of NLCs in brain-specific delivery of chemotherapeutic agents.

Main body

NLCs are lipid-based formulations with a solid matrix at room temperature and offer advantages like enhanced stability, low toxicity, increased shelf life, improved drug loading capacity, and biocompatibility over other conventional lipid-based nanocarriers such as nanoemulsions and solid lipid nanoparticles. This review meticulously articulates the structure, classification, components, and various methods of preparation exemplified with various research studies along with their advantages and disadvantages. The concept of drug loading and release has been discussed followed by a brief about stability and strategies to improve stability of NLCs. The review also summarizes various in vitro and in vivo research studies on NLCs encapsulated with cytotoxic drugs and their potential application in brain-specific drug delivery.

Conclusion

NLCs are employed as an important carrier for the delivery of food, cosmetics, and medicines and recently have been used in brain targeting, cancer, and gene therapy. However, in this review, the applications and importance of NLCs in targeting brain tumour have been discussed in detail stating examples of various research studies conducted in recent years. In addition, to shed light on the promising role of NLCs, the current clinical status of NLCs has also been summarized.

Graphical Abstract

Optimization of the Conditions of Solid Lipid Nanoparticles (SLN) Synthesis

Solid lipid nanoparticles (SLNs) have been synthesized as potential drug delivery systems. They are classified as solid lipid nanocarriers that can successfully carry both hydrophilic and hydrophobic drugs. SLNs are based on a biocompatible lipid matrix that is enzymatically degraded into natural components found in the human body. Solid lipid nanoparticles are suitable for the incorporation of hydrophobic active ingredients such as curcumin. The study included the optimization of lipid nanoparticle composition, incorporation of the active compound (curcumin), a stability evaluation of the obtained nanocarriers and characterization of their lipid matrix. Through process optimization, a dispersion of solid lipid nanoparticles (solid lipid:surfactant—2:1.25 weight ratio) predisposed to the incorporation of curcumin was developed. The encapsulation efficiency of the active ingredient was determined to be 99.80%. In stability studies, it was found that the most suitable conditions for conducting high-pressure homogenization are 300 bar pressure, three cycles and a closed-loop system. This yields the required values of the physicochemical parameters (a particle size within a 200−450 nm range; a polydispersity index of <30%; and a zeta potential of about |±30 mV|). In this work, closed-loop high-pressure homogenization was used for the first time and compared to the currently preferred open-loop method.

Recent Updates on Nanocosmeceutical Skin Care and Anti-Aging Products

Nanotechnology is an innovative area of science that deals with things smaller than 100 nanometers. The influence of nanotechnology in the cosmetic industry is overwhelming since it can enhance the properties attained by the particles at the nano level which includes color, solubility, etc, and also promotes the bioavailability of API. A plethora of nanomaterials can be employed in cosmetics including organic and inorganic nanoparticles. Unlike orthodox carriers, they facilitate easy penetration of the product into the skin and thereby increasing the stability and allowing a controlled drug release so that they can permeate deeper into the skin and start revitalizing it. Nanomaterials rejuvenate the skin by forming an occlusive barrier to inhibit the loss of water from the skin's surface and thereby moisturize the skin. Nano-cosmeceuticals are used to provide better protection against UV radiation, facilitate deeper skin penetration, and give long-lasting effects. Although they still have some safety concerns, hence detailed characterization or risk assessments are required to fulfill the standard safety requirements. In this review, an attempt is made to make a brief overview of various nanocosmeceutical skincare and anti-aging products.

Carbohydrate anchored lipid nanoparticles

Nanotechnology has been a dynamic field for formulation scientists with multidisciplinary research being conducted worldwide. Advancements in development of functional nanosystems have led to evolution of breakthrough technologies. Lipidic nanosystems, in particular, are highly preferred owing to their non-immunogenic safety profiles along with a range of versatile intrinsic properties. Surface modification of lipid nanoparticles by anchoring carbohydrates to these systems is one such attractive drug delivery technology. Carbohydrates confer interesting properties to the nanosystems such as stealth, biostability, bioavailability, reduced toxicity due to decreased immunogenic response, targeting potential as well as ease of commercial availability. The carbohydrate anchored systems can be developed using methods such as adsorption, incorporation (nanoprecipitation or solvent displacement method), crosslinking and grafting. Current review provides a detailed overview of potential lipid based nanoparticulate systems with an emphasis on liposomes, solid lipid nanoparticles, nanostructures lipid carriers and micelles. Review further explores basics of surface modification, methods applied therein, advantages of carbohydrates as surface modifiers, their versatile applications, techniques for characterization of carbohydrate anchored systems and vital regulatory aspects concerned with these specialized systems.

Nanotechnology in Cosmetics and Cosmeceuticals-A Review of Latest Advancements

Nanotechnology has the potential to generate advancements and innovations in formulations and delivery systems. This fast-developing technology has been widely exploited for diagnostic and therapeutic purposes. Today, cosmetic formulations incorporating nanotechnology are a relatively new yet very promising and highly researched area. The application of nanotechnology in cosmetics has been shown to overcome the drawbacks associated with traditional cosmetics and also to add more useful features to a formulation. Nanocosmetics and nanocosmeceuticals have been extensively explored for skin, hair, nails, lips, and teeth, and the inclusion of nanomaterials has been found to improve product efficacy and consumer satisfaction. This is leading to the replacement of many traditional cosmeceuticals with nanocosmeceuticals. However, nanotoxicological studies on nanocosmeceuticals have raised concerns in terms of health hazards due to their potential skin penetration, resulting in toxic effects. This review summarizes various nanotechnology-based approaches being utilized in the delivery of cosmetics as well as cosmeceutical products, along with relevant patents. It outlines their benefits, as well as potential health and environmental risks. Further, it highlights the regulatory status of cosmeceuticals and analyzes the different regulatory guidelines in India, Europe, and the USA and discusses the different guidelines and recommendations issued by various regulatory authorities. Finally, this article seeks to provide an overview of nanocosmetics and nanocosmeceuticals and their applications in cosmetic industries, which may help consumers and regulators to gain awareness about the benefits as well as the toxicity related to the continuous and long-term uses of these products, thus encouraging their judicious use.

Potential enhancement of metformin hydrochloride in solidified reverse micellar solution-based PEGylated lipid nanoparticles targeting therapeutic efficacy in diabetes treatment

Metformin hydrochloride (MH) is a widely used oral biguanide antihyperglycemic (antidiabetic) drug with poor bioavailability which necessitates the development of novel drug delivery systems such as PEGylated solid lipid nanoparticles for improving its therapeutic activity. The aim of this study was to formulate, characterize and evaluate in vitro and in vivo pharmacodynamic properties of metformin-loaded PEGylated solid lipid nanoparticles (PEG-SLN) for improved delivery of MH. The lipid matrices (non-PEGylated lipid matrix and PEGylated lipid matrices) used in the formulation of both non-PEGylated (J0) and PEGylated SLNs (J10, J20, J40) were prepared by fusion using beeswax and Phospholipon ® 90H at 7:3 ratio with or without polyethylene glycol (PEG) 4000 (0, 10, 20 and 40% w/w), respectively. Representative lipid matrices (LM and PEG-LM) were loaded with MH by fusion and then characterized by differential scanning calorimetry (DSC) and Fourier transform infrared (FT-IR) spectroscopy. The PEG-SLNs were prepared by high shear hot homogenization using the lipid matrices (5% w/w), drug (MH) (1.0% w/w), sorbitol (4% w/w) (cryoprotectant), Tween ® 80 (2% w/w) (surfactant) and distilled water (q.s to 100% w/w) (vehicle). The non-PEGylated and PEGylated SLNs (J0, J10, J20, J40)) were characterized with respect to encapsulation efficiency (EE%), loading capacity (LC), morphology by scanning electron microscopy (SEM), mean particle size (Zav) and polydispersity indices (PDI) by photon correlation spectroscopy (PCS), compatibility by FT-IR spectroscopy and in vitro drug release in biorelevant medium. Thereafter, in vivo antidiabetic study was carried out in alloxanized rats' model and compared with controls (pure sample of MH and commercial MH- Glucophage®)). Solid state characterizations indicated the amorphous nature of MH in the drug loaded-lipid matrices. The PEG-SLNs were mostly smooth and spherical nanoformulations with Zav and PDI of 350.00 nm and 0.54, respectively, for non-PEGylated SLNs, and in the range of 386.80-783.10 nm and 0.592 to 0.752, respectively, for PEGylated SLNs. The highest EE% and LC were noted in batch J20 and were 99.28% and 16.57, respectively. There was no strong chemical interaction between the drug and excipients used in the preparation of the formulations. The PEGylated SLN (batch J40) exhibited the highest percentage drug released (60%) at 8 h. The PEGylated SLNs showed greater hyperglycemic control than the marketed formulation (Glucophage ®) after 24 h. This study has shown that metformin-loaded PEGylated solid lipid nanoparticles could be employed as a potential approach to improve the delivery of MH in oral diabetic management, thus encouraging further development of the formulations.

Perspectives and Prospective on Solid Lipid Nanoparticles as Drug Delivery Systems

Combating multiple drug resistance necessitates the delivery of drug molecules at the cellular level. Novel drug delivery formulations have made it possible to improve the therapeutic effects of drugs and have opened up new possibilities for research. Solid lipid nanoparticles (SLNs), a class of colloidal drug carriers made of lipids, have emerged as potentially effective drug delivery systems. The use of SLNs is associated with numerous advantages such as low toxicity, high bioavailability of drugs, versatility in the incorporation of hydrophilic and lipophilic drugs, and the potential for production of large quantities of the carrier systems. The SLNs and nanostructured lipid carriers (NLCs) are the two most frequently used types of nanoparticles. These types of nanoparticles can be adjusted to deliver medications in specific dosages to specific tissues, while minimizing leakage and binding to non-target tissues.

Polysaccharide-Based Edible Films Incorporated with Essential Oil Nanoemulsions: Physico-Chemical, Mechanical Properties and Its Application in Food Preservation-A Review

Edible films with essential oils (EOs) are becoming increasingly popular as an alternative to synthetic packaging due to their environmentally friendly properties and ability as carriers of active compounds. However, the required amounts of EOs to impart effective antimicrobial properties generally exceed the organoleptic acceptance levels. However, by nanoemulsifying EOs, it is possible to increase their antimicrobial activity while reducing the amount required. This review provides an overview of the physico-chemical and mechanical properties of polysaccharide-based edible films incorporated with EOs nanoemulsions and of their application to the preservation of different food types. By incorporating EOs nanoemulsions into the packaging matrix, these edible films can help to extend the shelf-life of food products while also improving the quality and safety of the food product during storage. It can be concluded that these edible films have the potential to be used in the food industry as a green, sustainable, and biodegradable method for perishable foods preservation.

Nanocarrier mediated drug delivery as an impeccable therapeutic approach against Alzheimer's disease

For the past several years, dementia, is one of the predominantly observed groups of symptoms in a geriatric population. Alzheimer's disease (AD) is a progressive memory related neurodegenerative disease, for which the current Food and drug administration approved therapeutics are only meant for a symptomatic management rather than targeting the root cause of AD. These therapeutics belong to two classes, Acetylcholine Esterase inhibitors and N-methyl D-aspartate antagonist. Furthermore, to facilitate neuroprotective action in AD, the drugs are majorly expected to reach the specific target area in the brain for the desired efficacy. Thus, there is a huge requirement for drug discovery and development for facilitating the entry of drugs more in brain to exert a specific action. The very first line of defense and the major limitation for the entry of drugs into the brain is the Blood Brain Barrier, followed by Blood-Cerebrospinal Fluid Barrier. More than a barrier, these mainly act as selectively permeable membranes, which allows entry of specific molecules into the brain. Furthermore, specific enzymes result in the degradation of xenobiotics. All these mechanisms pose as hurdles in the way of effective drug delivery in the brain. Thus, novel techniques need to be harbored for the facilitation of the delivery of such drugs into the brain. Nanocarriers are advantageous for facilitating the specific targeted drug treatment in AD. As nanomedicines are one of the novels and most useful approaches for AD, thus the present review mainly focuses on understanding the advanced use of nanocarriers for targeted drug delivery in the management of AD.

A Stepwise Framework for the Systematic Development of Lipid Nanoparticles

A properly designed nanosystem aims to deliver an optimized concentration of the active pharmaceutical ingredient (API) at the site of action, resulting in a therapeutic response with reduced adverse effects. Due to the vast availability of lipids and surfactants, producing stable lipid dispersions is a double-edged sword: on the one hand, the versatility of composition allows for a refined design and tuning of properties; on the other hand, the complexity of the materials and their physical interactions often result in laborious and time-consuming pre-formulation studies. However, how can they be tailored, and which premises are required for a “right at first time” development? Here, a stepwise framework encompassing the sequential stages of nanoparticle production for disulfiram delivery is presented. Drug in lipid solubility analysis leads to the selection of the most suitable liquid lipids. As for the solid lipid, drug partitioning studies point out the lipids with increased capacity for solubilizing and entrapping disulfiram. The microscopical evaluation of the physical compatibility between liquid and solid lipids further indicates the most promising core compositions. The impact of the outer surfactant layer on the colloidal properties of the nanosystems is evaluated recurring to machine learning algorithms, in particular, hierarchical clustering, principal component analysis, and partial least squares regression. Overall, this work represents a comprehensive systematic approach to nanoparticle formulation studies that serves as a basis for selecting the most suitable excipients that comprise solid lipid nanoparticles and nanostructured lipid carriers.

Synthesis and Potential Applications of Lipid Nanoparticles in Medicine

Currently, carriers of active ingredients in the form of particles of a size measured in nanometers are the focus of interest of research centers worldwide. So far, submicrometer emulsions, liposomes, as well as microspheres, and nanospheres made of biodegradable polymers have been used in medicine. Recent studies show particular interest in nanoparticles based on lipids, and at the present time, are even referred to as the "era of lipid carriers". With the passage of time, lipid nanoparticles of the so-called first and second generation, SLN (Solid Lipid Nanoparticles) and nanostructured lipid carriers and NLC (Nanostructured Lipid Carriers), respectively, turned out to be an alternative for all imperfections of earlier carriers. These carriers are characterized by a number of beneficial functional properties, including, among others, structure based on lipids well tolerated by the human body, high stability, and ability to carry hydro- and lipophilic compounds. Additionally, these carriers can enhance the distribution of the drug in the target organ and alter the pharmacokinetic properties of the drug carriers to enhance the medical effect and minimize adverse side effects. This work is focused on the current review of the state-of-the-art related to the synthesis and applications of popular nanoparticles in medicine, with a focus on their use, e.g., in COVID-19 vaccines.