Advances in drug delivery and medical imaging using colloidal lyotropic liquid crystalline dispersions

Hierarchically structured phase separated biopolymer hydrogels create tailorable delayed burst release during gastrointestinal digestion

The on demand delivery of novel peptide actives, traditional pharmaceuticals, nutrients and/or vitamins is a ever present challenge due to the digestive and metabolic degradation of the active and the delivery vehicle. Biodegradable biopolymer hydrogels have long held promise as candidates for creating tailored release profiles due to the ability to control gel porosity. The present study describes the creation of novel hierarchical biopolymer hydrogels for the controlled release of lipids/lipophilic actives pharmaceutical ingredients (APIs), and mathematically describes the mechanisms that affect the timing of release. The creation of phase separated protein/polysaccharide core (6.6 wt% gelatin, 40 wt% Oil in water emulsion) shell structures (7 g/L xanthan with 70-140 g/L β-lactoglobulin) altered enzyme mass transport processes. This core shell structure enabled the creation of a tailorable burst release of API during gastrointestinal digestion where there is a delay in the onset of release, without affecting the kinetics of release. The timing of the delay could be readily programmed (with release of between 60 and 240 min) by controlling either the thickness or protein concentration (between 70 g/L and 140 g/L β-lactoglobulin) of the outer mixed biopolymer hydrogel shell (7 g/L xanthan with 70-140 g/L β-lactoglobulin). Enzyme diffusion measurements demonstrated that surface erosion was the main degradation mechanism. A kinetic model was created to describe the delayed burst release behaviour of APIs encapsulated within the core, and successfully predicted the influence of shell thickness and shell protein density on the timing of gastro-intestinal release (in vitro). Our work highlights the creation of a novel family of core-shell hydrogel oral dosage forms capable of programmable delivery of lipids/lipophilic APIs. These findings could have considerable implications for the delivery of peptides, poorly soluble drugs, or the programmed delivery of lipids within the gastrointestinal tract.

Impact of Molecular Partitioning and Partial Equilibration on the Estimation of Diffusion Coefficients from Release Experiments

The present work addresses the effect of partial equilibration and molecular partitioning on the interpretation of release experiments. In this regard, it is shown how release profiles and the values of extracted transport parameters are affected by the time protocol chosen for sample collection by considering a series of experiments where the latter is systematically varied. Caffeine is investigated as a main model drug because of its similar affinity for water and lipids, while monolinolein-based lipid cubic phases are chosen as host matrices because of their wide employment in release studies. Our findings point to a progressive decline in diffusion rate upon increasing the time step, that is, the gap in time between two consecutive pickups, which is a signature of increasing equilibration of caffeine concentration between the lipidic mesophase and the water phase. Furthermore, the amount of released molecules at the first pickup displays negligible changes for large time steps, indicating complete equilibration in such cases. A model is introduced based on Fick's diffusion which goes beyond the assumption of perfect-sink conditions, a common feature of the typical theoretical approaches hitherto developed. The model is shown to account quantitatively for the experimental data and is subsequently employed to clarify the interplay of the adopted release protocol with the various transport parameters in determining the final outcome of the release process. Particularly, two additional molecular drugs are considered, namely glucose and proflavine, which are, respectively, more hydrophilic and hydrophobic than caffeine, thus allowing elucidating the role of molecular partitioning.

On the Molecular Interactions in Lipid Bilayer-Water Assemblies of Different Curvatures

This work concerns the importance of intermolecular interactions present in aqueous lipid assembly systems depending on the type of aggregates they form. We have studied aqueous mixtures of diglycerol monooleate, Capmul glycerol monoleate (GMO-50) and polyoxyethylene (20) sorbitan monooleate (Polysorbate 80, P80) using small-angle X-ray scattering (SAXS) measurements to reveal the structure of liquid crystalline phases. On the basis of the SAXS data, a phase diagram was constructed. We discuss the effect of curvature changes of the lipid-aqueous interface obtained by changing the water content and the temperature. The results are related to the intermolecular interactions, as revealed by Raman spectroscopy, with a focus on the bilayer type of system of different curvature and bilayer flexibility, namely, the lamellar phase, bicontinuous cubic phase, and sponge phase. All phases show large similarities in their chain conformation and head group interactions as revealed by the Raman spectra, arising from the fact that all three structures are formed by lipid bilayers. However, subtle differences in the molecular organization of the sponge phase were revealed by employing Raman difference spectroscopy and by analysis of key spectroscopic indicators, which show a less dense hydrocarbon chain packing compared to the inverse bicontinuous cubic or lamellar phase.

Self-Assembled Nanostructured Lipid Systems: Is There a Link between Structure and Cytotoxicity?

Self-assembly of lipid-based liquid crystalline (LLC) nanoparticles is a formulation art arising from the hydrophilic-lipophilic qualities and the geometric packing of amphiphilic lipid molecules in an aqueous environment. The diversity of commercialized amphiphilic lipids and an increased understanding of the physicochemical factors dictating their membrane curvature has enabled versatile architectural design and engineering of LLC nanoparticles. While these exotic nanostructured materials are hypothesized to form the next generation of smart therapeutics for a broad field of biomedical applications, biological knowledge particularly on the systemic biocompatibility or cytotoxicity of LLC materials remains unclear. Here, an overview on the interactions between LLCs of different internal nanostructures and biological components (including soluble plasma constituents, blood cells, and isolated tissue cell lines) is provided. Factors affecting cell-nanoparticle tolerability such as the type of lipids, type of steric stabilizers, nanoparticle surface charges, and internal nanostructures (or lipid phase behaviors) are elucidated. The mechanisms of cellular uptake and lipid transfer between neighboring membrane domains are also reviewed. A critical analysis of these studies sheds light on future strategies to transform LLC materials into a viable therapeutic entity ideal for internal applications.

The stabilization of primitive bicontinuous cubic phases with tunable swelling over a wide composition range

In this paper we investigate the pseudo-ternary phase diagram of glycerol monooleate (GMO), a cationic lipid (DOTAP - 1,2-dioleoyl-3-trimethylammonium propane), and a "PEGylated" lipid (DOPE-PEG - 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000 kDa]) in excess water. We use small angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (Cryo-EM) to map out a phase diagram in a regime of low DOPE-PEG content (1-5 mol%), which is pertinent for the application of lipid systems as carriers of biomolecular cargo to cells. Pure GMO is known to self-assemble into bicontinuous cubic phases of the gyroid type at low water content and of the diamond type in excess water. These complex structures have numerous advantages reaching beyond drug delivery, e.g. as protein crystallization matrices, but their formulation is challenging as very small contents of guest molecules can shift the phase behavior towards other geometries such as the lamellar phase. In this work, we show that the ternary GMO/DOTAP/DOPE-PEG system allows the stabilization of bicontinuous cubic phases in excess water over a wide composition range. The symmetry of the phase can be tuned by varying the amount of PEGylated lipid, with the primitive type dominating at low DOPE-PEG content (1-3 mol%) and the diamond phase arising at 5 mol% DOPE-PEG. In addition, we found that the diamond phase is virtually non-responsive to electrostatic swelling. In contrast, primitive bicontinuous cubic lattice dimensions swell up in equilibrium to 650 Å with increased cationic lipid content.

Revisiting dispersible milk-drug tablets as a solid lipid formulation in the context of digestion

Oral delivery of dispersible tablets is a preferred route of administration for paediatrics due to ease of administration and dose control. Milk has gained interest as a drug delivery system due to its ability to dissolve poorly water-soluble drugs. There are no reports of milk tablet formulations being assessed in the context of lipid digestion, which is critical in influencing orally administered drug solubility and bioavailability. Milk-drug tablets were formulated by blending freeze-dried bovine milk or infant formula with the poorly water-soluble drug cinnarizine, which were directly compressed. Tablet strength, friability and dispersibility were quantified and synchrotron X-ray scattering was used to determine the lipid liquid crystalline phases formed during in vitro digestion of dispersed tablets and their effects on drug solubilisation. Tableting had a significant impact on the self-assembly of lipids in redispersed milk tablets whereas no effect was seen for infant formula tablets. Incorporation of the disintegrant poly(vinylpolypyrrolidone) to reduce tablet dispersion times promoted the formation of hexagonal liquid crystalline phases upon digestion but had minimal effect on drug solubilisation. These findings show that similar to the use of liquid milk, the formulation of milk-drug tablets can be used to improve solubilisation of poorly water-soluble drugs.

A Novel Phytantriol-Based Lyotropic Liquid Crystalline Gel for Efficient Ophthalmic Delivery of Pilocarpine Nitrate

The purpose of this paper was to investigate the potential of liquid crystalline (LC) gels for ophthalmic delivery, so as to enhance the bioavailability of pilocarpine nitrate (PN). The gels were prepared by a vortex method using phytantriol and water (in the ratio of 73:27 w/w). Their inner structures were confirmed by crossed polarized light microscopy, small-angle X-ray scattering, attenuated total reflectance-Fourier transform infrared spectrum, and rheology. The in vitro release studies revealed that PN could keep sustained release from the gels over a period of 12 h. The ex vivo apparent permeability coefficient of the gels demonstrated a 3.83-folds (P < 0.05) increase compared with that of eye drops. The corneal hydration levels of the gel maintained in the normal range of 79.46 ± 2.82%, hinting that the gel could be considered non-damaging and safe to the eyes. Furthermore, in vivo residence time evaluation suggested that a better retention performance of LC gel was observed in rabbit's eyes compared to eye drops. In vivo ocular irritation study indicated that LC gel was nonirritant and might be suitable for various eye applications. In conclusion, LC gels might represent a potential ophthalmic delivery strategy to overcome the limitations of eye drops.

Fluorescent squaramide ligands for cellular imaging and their encapsulation in cubosomes

Two new fluorescent squaramides bearing quinoline (L1) and naphthalene (L2) as fluorogenic fragments were synthesized and investigated as possible cellular imaging probes as free molecules and when loaded in monoolein-based cubosomes.

Understanding the kinetic mixing between liquid crystalline nanoparticles and agrochemical actives

The use of liquid crystalline nanoparticles as potential agrochemical delivery agents or adjuvant systems is gaining traction due to the possibility that the systems can enhance penetration of the active and increase adhesion of the formulation to the leaf, increasing overall efficacy and decreasing the harmful environmental impact. However the interaction between liquid crystalline nanoparticles and active products is not well understood. Using small angle X-ray scattering we investigated the structural changes that occur to liquid crystalline nanoparticles upon addition of three common herbicides, 2,4-D 2-ethylhexyl ester, bromoxynil octanoate and haloxyfop-p-methyl ester active agrochemicals in the form of emulsions. It was found that the hydrophobic herbicides induced structural changes to varying degrees when pre-mixed with liquid crystalline forming lipids (phytantriol and glycerol monooleate) and also during dynamic mixing as emulsions.

Liquid Crystals: A Novel Approach for Cancer Detection and Treatment

Liquid crystals are defined as the fourth state of matter forming between solid and liquid states. Earlier the applications of liquid crystals were confined to electronic instruments, but recent research findings suggest multiple applications of liquid crystals in biology and medicine. Here, the purpose of this review article is to discuss the potential biological impacts of liquid crystals in the diagnosis and prognosis of cancer along with the risk assessment. In this review, we also discussed the recent advances of liquid crystals in cancer biomarker detection and treatment in multiple cell line models. Cases reviewed here will demonstrate that cancer diagnostics based on the multidisciplinary technology and intriguingly utilization of liquid crystals may become an alternative to regular cancer detection methodologies. Additionally, we discussed the formidable challenges and problems in applying liquid crystal technologies. Solving these problems will require great effort and the way forward is through the multidisciplinary collaboration of physicists, biologists, chemists, material-scientists, clinicians, and engineers. The triumphant outcome of these liquid crystals and their applications in cancer research would be convenient testing for the detection of cancer and may result in treating the cancer patients non-invasively.

Cubosomes for topical delivery of the antimicrobial peptide LL-37

In this study, the use of cubosomes for topical delivery of the antimicrobial peptide (AMP) LL-37 was investigated. Topical delivery of AMPs is of great interest for treatment of skin infections caused by bacteria, such as Staphylococcus aureus. AMP containing cubosomes were produced by three different preparation protocols and compared: (i) pre-loading, where LL-37 was incorporated into a liquid crystalline gel, which thereafter was dispersed into nanoparticles, (ii) post-loading, where LL-37 was let to adsorb onto pre-formed cubosomes, and (iii) hydrotrope-loading, where LL-37 was incorporated during the spontaneously formed cubosomes in an ethanol/glycerol monooleate mixture. Particle size and size distribution were analyzed using dynamic light scattering (DLS), liquid crystalline structure by small angle x-ray scattering (SAXS) and release of LL-37 by a fluorescamine assay. Proteolytic protection of LL-37 as well as bactericidal effect after enzyme exposure was investigated. The skin irritation potential of cubosomes was examined by an in vitro epidermis model. Finally, the bacterial killing property of the cubosomes was examined by an ex vivo pig skin wound infection model with Staphylococcus aureus. Data showed that a high loading of LL-37 induced formation of vesicles in case of cubosomes prepared by sonication (pre-loading). No release of LL-37 was observed from the cubosomes, indicating strong association of the peptide to the particles. Proteolysis studies showed that LL-37 was fully protected against enzymatic attacks while associated with the cubosomes, also denoting strong association of the peptide to the particles. As a consequence, bactericidal effect after enzyme exposure remained, compared to pure LL-37 which was subjected to proteolysis. No skin irritation potential of the cubosomes was found, thus enabling for topical administration. The ex vivo wound infection model showed that LL-37 in pre-loaded cubosomes killed bacteria most efficient.

Large Hexosomes from Emulsion Droplets: Particle Shape and Mesostructure Control

Soft, rotationally symmetric particles of dispersed hexagonal liquid crystalline phase are produced using a method previously developed for cubosome microparticle production. The technique forms hexosome particles via removal of ethanol from emulsion droplets containing monoolein, water, and one of the various hydrophobic molecules: vitamin E, hexadecane, oleic acid, cyclohexane, or divinylbenzene. The unique rotational symmetry of the particles is characterized by optical microscopy and small-angle X-ray scattering to link particle phase, shape, and structure to composition. Rheology of the soft particles can be varied independently of shape, enabling control of transport, deformation, and biological response by controlling composition and molecular structure of the additives. The direct observations of formation, and the resultant hexosome shapes, link the particle-scale and mesoscale properties of these novel self-assembled particles and broaden their applications. The micron-scale hexosomes provide a route to understanding the effects of particle size, crystallization rate, and rheology on the production of soft particles with liquid crystalline structure and unique shape and symmetry.

In situ phase transition of microemulsions for parenteral injection yielding lyotropic liquid crystalline carriers of the antitumor drug bufalin

In this work, we used the small angle X-ray scattering (SAXS) method for controlled preparation of in situ forming sustained-release carriers for the antitumor drug bufalin (BUF), which has very poor solubility and a considerable cardiotoxicity in a non-encapsulated state. To that aim, we exploited the pseudo-ternary phase diagram of an oil(O)/surfactant(S)/water(W) system containing medium chain capric/caprylic triglycerides (MCT) and a co-surfactant blend of Macrogol (15)-hydroxystearate (Solutol HS 15) and sorbitan monooleate (Span 80). Two compositions with different oil contents (sample B and C) were selected from the microemulsion region of the phase diagram in order to study the effect of the aqueous environment on their structural behavior. A phase transition from a microemulsion (ME) to a liquid crystalline phase (LC) was established by SAXS upon progressive dilution. The drug bufalin (BUF) was encapsulated in the microemulsions with low viscosity, whereas the release of the drug occurred from the in situ generated lamellar liquid crystalline structures. The formulations were characterized by SAXS, dynamic light scattering (DLS), cryogenic transmission electron microscopy (Cryo-TEM), rheology, drug loading and encapsulation efficiency, and in vitro release profiles. A correlation was suggested between the structures of the in situ phase-transition formed LCME formulations, the differences in their viscosities and drug release profiles. The performed cytotoxicity, cell apoptosis and pharmacokinetic experiments showed an enhanced bioavailability of BUF after encapsulation. These results suggest potential clinical applications for the obtained safe in situ phase-transition sustained-release formulations of BUF.

Nonlamellar liquid crystals: a new paradigm for the delivery of small molecules and bio-macromolecules

The aim of this article is to collate the recent developments in the field of drug delivery, medical therapeutics and diagnostics specifically involving the nonlamellar liquid crystalline (NLC) systems. This review highlights different NLC phases having cubic, hexagonal and sponge internal structures, and their application in the field of drug delivery, such as dose reduction, toxicity reduction and therapeutic efficacy enhancement either in the form of nanoparticles, colloidal dispersion or gels. In addition, application of NLC systems as vehicles for peptides, proteins and as a theranostic system in cancer and other disease conditions is also elaborated, which is a growing platform of interest. Overall, the present review gives us a complete outlook on applications of NLC systems in the field of medicine.

Cubic lyotropic liquid crystals as drug delivery carriers: Physicochemical and morphological studies

The self-assembly process of amphiphilic molecules into solvents results in different mesophases, such as inverse cubic and hexagonal that both belong to the wider category of lyotropic liquid crystals. The above mesophases can be further exploited upon the formation of liquid crystalline nanoparticles, cubosomes and hexosomes respectively, which may be utilized as drug delivery nanosystems, exhibiting major advantages. In the present study, liquid crystalline nanoparticles were prepared and evaluated in terms of morphology and physicochemical behavior. The goal of this study is to examine the effect of the different formulation parameters, as well as the effect of the different microenvironmental factors (temperature, ionic strength, pH, serum proteins presence) on their behavior. The physicochemical behavior and the morphology of the systems were investigated by X-Ray Diffraction (XRD), cryogenic-Transmission Electron Microscopy (cryo-TEM), fluorescence spectroscopy and a gamut of light scattering techniques. The formulation process was proved to influence strictly the physicochemical behavior of the prepared nanosystems. They presented colloidal stability over time and upon ionic strength increase, but they were affected by the presence of proteins and presented reversible structure alterations upon temperature increase. Their morphological structure and internal microenvironment, reflected by micropolarity and microfluidity, were also influenced by the formulation parameters.

Paclitaxel-Loaded Self-Assembled Lipid Nanoparticles as Targeted Drug Delivery Systems for the Treatment of Aggressive Ovarian Cancer

Chemotherapy using cytotoxic agents, such as paclitaxel (PTX), is one of the most effective treatments for advanced ovarian cancer. However, due to nonspecific targeting of the drug and the presence of toxic solvents required for dissolving PTX prior to injection, there are several serious side effects associated with this treatment. In this study, we explored self-assembled lipid-based nanoparticles as PTX carriers, which were able to improve its antitumour efficacy against ovarian cancer. The nanoparticles were also functionalized with epidermal growth factor receptor (EGFR) antibody fragments to explore the benefit of tumor active targeting. The formulated bicontinuous cubic- and sponge-phase nanoparticles, which were stabilized by Pluronic F127 and a lipid poly(ethylene glycol) stabilizer, showed a high capacity of PTX loading. These PTX-loaded nanoparticles also showed significantly higher cytotoxicity than a free drug formulation against HEY ovarian cancer cell lines in vitro. More importantly, the nanoparticle-based PTX treatments, with or without EGFR targeting, reduced the tumor burden by 50% compared to PTX or nondrug control in an ovarian cancer mouse xenograft model. In addition, the PTX-loaded nanoparticles were able to extend the survival of the treatment groups by up to 10 days compared to groups receiving free PTX or nondrug control. This proof-of-concept study has demonstrated the potential of these self-assembled lipid nanomaterials as effective drug delivery nanocarriers for poorly soluble chemotherapeutics, such as PTX.

Polymer-free cubosomes for simultaneous bioimaging and photodynamic action of photosensitizers in melanoma skin cancer cells

We designed novel polymer-free cubic bicontinuous liquid crystalline dispersions (cubosomes) using monoolein as molecular building block, phospholipids as stabilizers, propylene glycol as hydrotrope. Their kinetic stability was evaluated by analysing the backscattering profiles upon ageing, and the most stable formulation was chosen as potential photosensitizers delivery vehicle for photodynamic therapy (PDT) of human skin melanoma cells. Morphological and topological features of such formulation alternatively loaded with Chlorin e6 or meso-Tetraphenylporphine-Mn(III) chloride photosensitizing dyes were investigated by cryo-TEM, DLS, and SAXS. Bioimaging studies demonstrated that Me45 and MeWo cell lines effectively internalized these cubosomes formulations. Particularly, photodynamic activity experiments proved both the very low cytotoxicity of the cubosomes formulation loaded with Chlorin e6 dye in the "dark" condition, and its significant cytotoxic effect after photoirradiation. The toxic effect recorded when the photosensitizer was encapsulated within the cubosomes was shown to be one order of magnitude higher than that caused by the free photosensitizer. This is the first report of biocompatible polymer-free cubosomes for potential application in both PDT and bioimaging of skin malignant melanoma.

Characterization of Lipid-Based Lyotropic Liquid Crystal and Effects of Guest Molecules on Its Microstructure: a Systematic Review

Liquid crystals (LCs) are conventionally divided into thermotropic or lyotropic, based on the organization and sequence of the controlled molecular system. Lipid-based lyotropic liquid crystal (LLC), such as lamellar (Lα), bicontinuous cubic (Q_II), or hexagonal (H_II) phases, have attracted wide interest in the last few decades due to their practical potential in diverse applications and notable structural complexity. Various guest molecules, such as biopharmaceuticals, chemicals, and additives, can be solubilized in either aqueous or oily phase. And the LLC microstructure can be altered to affect the rate of drug release eventually. To utilize these microstructural variations to adjust the drug release in drug delivery system (DDS), it is crucial to understand the structure variations of the LLC caused by different types of guest molecules. Therefore, in this article, we review the effect of guest molecules on lipid-based LLC microstructures. In particular, we focus on the different characterization methods to evaluate this change caused by guest substances, such as polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), self-diffusion nuclear magnetic resonance (SD-NMR), and so on.

Immune responses induced by nano-self-assembled lipid adjuvants based on a monomycoloyl glycerol analogue after vaccination with the Chlamydia trachomatis major outer membrane protein

Nanocarriers based on inverse hexagonal liquid crystalline phases (hexosomes) show promising potential as vaccine delivery systems. Their unique internal structure, composed of both lipophilic domains and water-containing channels, renders them capable of accommodating immunopotentiating compounds and antigens. However, their adjuvant properties are poorly understood. We hypothesized that the supramolecular structure of the lyotropic liquid crystalline phase influences the immunostimulatory activity of lipid-based nanocarriers. To test this, hexosomes were designed containing the lipid phytantriol (Phy) and the immunopotentiator monomycoloyl glycerol-1 (MMG-1). Self-assembly of Phy and MMG-1 into nanocarriers featuring an internal hexagonal phase was confirmed by small-angle X-ray scattering and cryogenic transmission electron microscopy. The effect of the nanostructure on the adjuvant activity was studied by comparing the immunogenicity of Phy/MMG-1 hexosomes with MMG-1-containing lamellar liquid crystalline nanoparticles (liposomes, CAF04). The quality and magnitude of the elicited immune responses were determined after vaccination of CB6/F1 mice using the Chlamydia trachomatis major outer membrane protein (MOMP) as antigen. MMG-1-based hexosomes potentiated significantly stronger MOMP-specific humoral responses than CAF04 liposomes. The liposome-based vaccine formulation induced a much stronger MOMP-specific cell-mediated immune response compared to hexosome-adjuvanted MOMP, which elicited minimal MOMP-specific T-cell stimulation after vaccination. Hence, our data demonstrates that hexosomal and liposomal adjuvants activate the immune system via different mechanisms. Our work provides valuable insights into the adjuvant potential of hexosomes and emphasizes that engineering of the supramolecular structure can be used to design adjuvants with customized immunological properties.

Direct Visualization of the Structural Transformation between the Lyotropic Liquid Crystalline Lamellar and Bicontinuous Cubic Mesophase

The transition between the lyotropic liquid crystalline lamellar and the bicontinuous cubic mesophase drives multiple fundamental cellular processes involving changes in cell membrane topology, including endocytosis and membrane budding. While several theoretical models have been proposed to explain this dynamic transformation, experimental validation of these models has been challenging because of the short-lived nature of the intermediates present during the phase transition. Herein, we report the direct observation of a lamellar-to-bicontinuous cubic phase transition in nanoscale dispersions using a combination of cryogenic transmission electron microscopy and static small-angle X-ray scattering. The results represent the first experimental confirmation of a theoretical model which proposed that the bicontinuous cubic phase originates from the center of a lamellar vesicle then propagates outward via the formation of interlamellar attachments and stalks. The observation was possible because of the precise control of the lipid composition to place the dispersion systems at the phase boundary of a lamellar and a cubic phase, allowing for the creation of long-lived structural intermediates. By the surveying of the nanoparticles using cryogenic transmission electron microscopy, a complete phase transition sequence was established.

Transition Metal Ion-Mediated Tyrosine-Based Short-Peptide Amphiphile Nanostructures Inhibit Bacterial Growth

We report the design and synthesis of a biocompatible small-peptide-based compound for the controlled and targeted delivery of encapsulated bioactive metal ions through transformation of the internal nanostructures of its complexes. A tyrosine-based short-peptide amphiphile (sPA) was synthesized and observed to self-assemble into β-sheet-like secondary structures. The self-assembly of the designed sPA was modulated by application of different bioactive transition-metal ions, as was confirmed by spectroscopic and microscopic techniques. These bioactive metal-ion-conjugated sPA hybrid structures were further used to develop antibacterial materials. As a result of the excellent antibacterial activity of zinc ions the growth of clinically relevant bacteria such as Escherichia coli was inhibited in the presence of zinc⋅sPA conjugate. Bacterial testing demonstrated that, due to high biocompatibility with bacterial cells, the designed sPA acted as a metal ion delivery agent and might therefore show great potential in locally addressing bacterial infections.

A novel concept of overcoming the skin barrier using augmented liquid nanocrystals: Box-Behnken optimization, ex vivo and in vivo evaluation

Agomelatine suffers from extensive inactivation through 1^st pass effect with a limited oral bioavailability (5%). The aim of this study was to formulate and optimize liquid nanocrystals (LNC) containing agomelatine to enhance the transdermal permeation of the drug. The independent factors of the employed Box-Behnken design were the Pluronic F127, deoxycholic acid sodium salt and propylene glycol percentages. On the other hand, particle size, polydispersity index, zeta potential, entrapment efficiency, cumulative amount permeated at certain time intervals and permeation enhancement ratio were considered as dependent responses. The optimized formulation was composed of 1.5% Pluronic F127 and 1.5% deoxycholic acid sodium salt and it was found to have significantly higher AUC_0-24h, AUC_0-∞ and elimination t_1/2 than that of the employed reference indicating the enhancement of the drug permeation. The obtained findings indicated the ability of the optimized LNC formulation to improve the drug bioavailability after its transdermal application.

Liquid crystalline nanoparticles encapsulating cisplatin and docetaxel combination for targeted therapy of breast cancer

Cancer remains a leading cause of death. A combination of anticancer agents can effectively kill cancer through multiple pathways; however, improvements to their delivery are needed. Hence, docetaxel and cisplatin-loaded liquid crystalline nanoparticles with folic acid were prepared for effective and targeted anticancer therapy. Notably, hydroxypropyl-β-cyclodextrin/cisplatin complexes in 0.9% NaCl solution were used for the prevention of possible aquation of cisplatin, which would otherwise lead to severe adverse effects. The optimized nanoparticles exhibited small particle size, high drug loading capacity (>90%), and controlled drug release profiles. In vitro cell cytotoxicity assays demonstrated that the optimized nanoparticles were taken up by folate receptor-expressing cells to a greater extent than non-folate expressing cells, which is attributable to folate-specific endocytosis of the optimized nanoparticles. Enhanced expression of apoptotic markers (Bax, p21, and cleaved caspase-3) along with enhanced anti-migration effects in MDA-MB-231 cells following treatment suggests that the optimized nanoparticles provide an effective treatment for metastatic breast cancer. These results were further supported by in vivo findings obtained for a MDA-MB-231 tumor xenograft model. Altogether, the optimized nanoparticles may potentially be developed as an effective treatment modality for folate-targeted metastatic breast cancer treatment.

Lyotropic liquid crystal engineering moving beyond binary compositional space - ordered nanostructured amphiphile self-assembly materials by design

Ordered amphiphile self-assembly materials with a tunable three-dimensional (3D) nanostructure are of fundamental interest, and crucial for progressing several biological and biomedical applications, including in meso membrane protein crystallization, as drug and medical contrast agent delivery vehicles, and as biosensors and biofuel cells. In binary systems consisting of an amphiphile and a solvent, the ability to tune the 3D cubic phase nanostructure, lipid bilayer properties and the lipid mesophase is limited. A move beyond the binary compositional space is therefore required for efficient engineering of the required material properties. In this critical review, the phase transitions upon encapsulation of more than 130 amphiphilic and soluble additives into the bicontinuous lipidic cubic phase under excess hydration are summarized. The data are interpreted using geometric considerations, interfacial curvature, electrostatic interactions, partition coefficients and miscibility of the alkyl chains. The obtained lyotropic liquid crystal engineering design rules can be used to enhance the formulation of self-assembly materials and provides a large library of these materials for use in biomedical applications (242 references).

Manipulating the Ordered Nanostructure of Self-Assembled Monoolein and Phytantriol Nanoparticles with Unsaturated Fatty Acids

Mesophase structures of self-assembled lyotropic liquid crystalline nanoparticles are important factors that directly influence their ability to encapsulate and release drugs and their biological activities. However, it is difficult to predict and precisely control the mesophase behavior of these materials, especially in complex systems with several components. In this study, we report the controlled manipulation of mesophase structures of monoolein (MO) and phytantriol (PHYT) nanoparticles by adding unsaturated fatty acids (FAs). By using high throughput formulation and small-angle X-ray scattering characterization methods, the effects of FAs chain length, cis-trans isomerism, double bond location, and level of chain unsaturation on self-assembled systems are determined. Additionally, the influence of temperature on the phase behavior of these nanoparticles is analyzed. We found that in general, the addition of unsaturated FAs to MO and PHYT induces the formation of mesophases with higher Gaussian surface curvatures. As a result, a rich variety of lipid polymorphs are found to correspond with the increasing amounts of FAs. These phases include inverse bicontinuous cubic, inverse hexagonal, and discrete micellar cubic phases and microemulsion. However, there are substantial differences between the phase behavior of nanoparticles with trans FA, cis FAs with one double bond, and cis FAs with multiple double bonds. Therefore, the material library produced in this study will assist the selection and development of nanoparticle-based drug delivery systems with desired mesophase.

Non-lamellar lyotropic liquid crystalline nanoparticles enhance the antibacterial effects of rifampicin against Staphylococcus aureus

The fight against infection in an era of emerging antibiotic resistant bacteria is one of the grandest scientific challenges facing society today. Nano-carriers show great promise in improving the antibacterial activity of antibiotics as they are able to enhance their solubility, provide sustained release and reduce toxic side effects via specifically targeting infection sites. Here, we investigate the antibacterial effect of two lipidic nano-carriers that contain the poorly soluble antibiotic rifampicin in their bilayers. One nanoparticle is assembled solely from the lipid monoolein, thus is neutral at physiological pH and the other contains a mixture of monoolein and the cationic lipid N-[1-(2,3-Dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl-sulfate (DOTAP), thus is positively charged. Our results show that rifampicin-loaded nanoparticles reduce the minimum inhibitory concentration against Staphylococcus aureus compared to rifampicin alone, however this reduction was most pronounced for the positively charged nanoparticles. Fluorescent microscopy revealed binding of all nanoparticles to the bacteria and enhanced binding was observed for the charged nanoparticles. This suggests that the cationic lipids promote electrostatic interactions with the negatively charged bacterial membrane. Förster resonance energy transfer demonstrated that the cationic charged nanoparticles were able to fuse with bacterial membranes whilst atomic force microscopy and transmission electron microscopy revealed structural damage to the bacterial membranes caused by the nanoparticles. Significantly, we identified a concentration window in which the nanoparticles exhibited antibacterial activity while not affecting HeLa and CHO cell viability. This ability to improve the efficacy of antibiotics without affecting their eukaryotic cytotoxicity is of significant importance for future development of nanomedicine based strategies to combat infections.

Counterion-Dependent Access to Low-Symmetry Lyotropic Sphere Packings of Ionic Surfactant Micelles

The water-driven self-assembly of homologous dianionic surfactants into lyotropic liquid crystals (LLCs) is investigated, with a focus on understanding how surfactant headgroup and counterion identities guide supramolecular spherical mesophase selection. Using temperature-dependent small-angle X-ray scattering (SAXS), we demonstrate that 2-alkylmalonate surfactants (C_nMal-M₂) with n = 8 (octyl) or 10 (decyl) and M = K⁺, Cs⁺, or (CH₃)₄N⁺ form both simple and complex micelle packings. Observed spherical morphologies include body-centered cubic (BCC), hexagonally closest-packed (HCP), and tetrahedrally closest-packed Frank-Kasper (FK) A15 and σ phases (Pm3(-)n and P4₂/mnm symmetries, respectively). Previously observed in only one other minimally hydrated surfactant, the σ phase is a rare LLC morphology comprising a low-symmetry unit cell containing 30 sub-2-nm quasispherical micelles, each of which belongs to one of five symmetry-equivalent classes with discrete aggregation numbers. Temperature versus water concentration phase maps for C_nMal-M₂ LLCs reveal that σ-phase formation depends sensitively on the size and polarizability of the surfactant counterion and the length of the surfactant alkyl tail. These observations are rationalized in terms of a delicate interplay between global packing symmetry and local particle symmetry, and the extent to which counterion-headgroup correlations enforce the latter structures in these LLC phases.

Liquid-crystalline nanoarchitectures for tissue engineering

Hierarchical orders are found throughout all levels of biosystems, from simple biopolymers, subcellular organelles, single cells, and macroscopic tissues to bulky organs. Especially, biological tissues and cells have long been known to exhibit liquid crystal (LC) orders or their structural analogues. Inspired by those native architectures, there has recently been increased interest in research for engineering nanobiomaterials by incorporating LC templates and scaffolds. In this review, we introduce and correlate diverse LC nanoarchitectures with their biological functionalities, in the context of tissue engineering applications. In particular, the tissue-mimicking LC materials with different LC phases and the regenerative potential of hard and soft tissues are summarized. In addition, the multifaceted aspects of LC architectures for developing tissue-engineered products are envisaged. Lastly, a perspective on the opportunities and challenges for applying LC nanoarchitectures in tissue engineering fields is discussed.

Aqueous dispersions of lipid nanoparticles wet hydrophobic and superhydrophobic surfaces

Efficient delivery of aqueous sprays to hydrophobic surfaces is the key technological challenge in a wide variety of applications, including pesticide delivery to plants. To account for losses due to bouncing of pesticide sprays off hydrophobic leaf surfaces, a large excess of pesticide is typically employed, resulting in environmentally hazardous run-offs that contaminate soil and ground water. We demonstrate that aqueous dispersions of glycerol monooleate nanoparticles, called cubosomes, wet hydrophobic and superhydrophobic surfaces and adhere to them. Cubosomes comprise glycerol monooleate lipid molecules self-assembled into a double diamond cubic phase, that form stable aqueous dispersions that are sterically stabilized using amphiphilic block copolymers. We use high speed imaging to monitor the spreading and retraction of aqueous drops impinged on model hydrophobic substrates and on superhydrophobic lotus leaves. We show that cubosomes diffuse to hydrophobic substrates and reorganize to form a thin, ≈2 nm adsorbed lipid layer during the millisecond time scales that characterize drop impact. This adsorbed film drastically reduces the water contact angle, transforming the hydrophobic surface to hydrophilic, thus facilitating retention of the aqueous drop on the surface. Aqueous drops of cubosomes impinged at low velocities on inclined natural superhydrophobic lotus leaf surfaces do not roll off, unlike drops of water or surfactant solutions. When sprayed on inclined lotus leaves, corresponding to the case of high velocity drop impingement, cubosome dispersions form a continuous wetting film. Our results have important implications for efficient, environment-friendly delivery of pesticide sprays.

Annexin V-containing cubosomes for targeted early detection of apoptosis in degenerative retinal tissue

ANX–PS–Phy cubosomes could be applied as a safe and robust drug delivery vehicle for targeting damaged, apoptotic cells in ocular diseases.

Clickable Cubosomes for Antibody-Free Drug Targeting and Imaging Applications

The combination of copper-free click chemistry with metabolic labeling offers new opportunities in drug delivery. The objective of this study was to determine whether cubosomes functionalized with azide or dibenzocyclooctyne (DBCO) groups are able to undergo copper-free click chemistry with a strained cyclooctyne or azide, respectively. Phytantriol-based cubosomes were functionalized using phospholipids bearing an azide or DBCO group. The modified cubosome dispersions were characterized using dynamic light scattering, cryo-TEM, and small-angle X-ray scattering. The efficiency of "clickability" was assessed by reacting the cubosomes with a complementary dye and determining bound and unbound dye via size exclusion chromatography. The clickable cubosomes reacted specifically and efficiently with a click-Cy5 dye with minor changes to the size, shape, and structure of the cubosomes. This indicates that cubosomes can retain their unique internal structure while participating in copper-free click chemistry. This proof of concept study paves the way for the use of copper-free click chemistry and metabolic labeling with cubosomes for targeted drug delivery and imaging.

Active Gating, Molecular Pumping, and Turnover Determination in Biomimetic Lipidic Cubic Mesophases with Reconstituted Membrane Proteins

Understanding the mechanisms controlling molecular transport in bioinspired materials is a central topic in many branches of nanotechnology. In this work, we show that biomolecules of fundamental importance in biological processes, such as glucose, can be transported in an active, controlled, and selective manner across macroscopic lipidic cubic mesophases, by correctly reconstituting within them their corresponding membrane protein transporters, such as Staphylococcus epidermidis (GlcP_Se). Importantly, by duly exploiting the symporter properties of GlcP_Se of coupled glucose/H⁺ transport, the diffusion of glucose can further be tuned by independent physiological stimuli, such as parallel or antiparallel pH gradients, offering an important model to study molecular exchange processes in cellular machinery. We finally show that by measuring the transport properties of the lipidic mesophases with and without the GlcP_Se membrane protein reconstituted within, it becomes possible to determine its intrinsic conductance. We generalize these findings to other membrane proteins from the antiporters family, such as the bacterial ClC exchanger from Escherichia coli (EcClC), providing a robust method for evaluating the turnover rate of the membrane proteins in general.

Soft polyhedral particles based on cubic liquid crystalline emulsion droplets

Soft polyhedral particles based on variations of the cubic symmetry group are produced from a precursor emulsion by extracting solvent to grow facets on the droplets. The droplets transform into liquid crystals with solid-like rheology and controlled size and shape. Small-angle X-ray scattering confirms a bicontinuous cubic liquid crystalline phase forms from aqueous glycerol monoolein and is responsible for the particle faceting observed. Different polyhedra are produced by varying face growth rates through control of precursor droplet size, system temperature, and solubilization and adsorption of guest molecules. More exotic faceted shapes can be formed by the soft particles by applying asymmetric solvent removal gradients and by deforming the precursor droplets into, for example, ellipsoids before crystallization. The method is a powerful means to produce soft polyhedra, using continuous microfluidic or other approaches, or to act as templates for hard polyhedral particle synthesis.

Advances in structural design of lipid-based nanoparticle carriers for delivery of macromolecular drugs, phytochemicals and anti-tumor agents

The present work highlights recent achievements in development of nanostructured dispersions and biocolloids for drug delivery applications. We emphasize the key role of biological small-angle X-ray scattering (BioSAXS) investigations for the nanomedicine design. A focus is given on controlled encapsulation of small molecular weight phytochemical drugs in lipid-based nanocarriers as well as on encapsulation of macromolecular siRNA, plasmid DNA, peptide and protein pharmaceuticals in nanostructured nanoparticles that may provide efficient intracellular delivery and triggered drug release. Selected examples of utilisation of the BioSAXS method for characterization of various types of liquid crystalline nanoorganizations (liposome, spongosome, cubosome, hexosome, and nanostructured lipid carriers) are discussed in view of the successful encapsulation and protection of phytochemicals and therapeutic biomolecules in the hydrophobic or the hydrophilic compartments of the nanocarriers. We conclude that the structural design of the nanoparticulate carriers is of crucial importance for the therapeutic outcome and the triggered drug release from biocolloids.

Influence of a pH-sensitive polymer on the structure of monoolein cubosomes

Cubosomes consist in submicron size particles of lipid bicontinuous cubic phases stabilized by surfactant polymers. They provide an appealing road towards the practical use of lipid cubic phases for pharmaceutical and cosmetic applications, and efforts are currently being made to control the encapsulation and release properties of these colloidal objects. We overcome in this work the lack of sensitivity of monoolein cubosomes to pH conditions by using a pH sensitive polymer designed to strongly interact with the lipid structure at low pH. Our cryo-transmission electron microscope (cryo-TEM) and small-angle X-ray scattering (SAXS) results show that in the presence of the polymer the cubic phase structure is preserved at neutral pH, albeit with a larger cell size. At pH 5.5, in the presence of the polymer, the nanostructure of the cubosome particles is significantly altered, providing a pathway to design pH-responsive cubosomes for applications in drug delivery.

New nanoparticles obtained by co-assembly of amphiphilic cyclodextrins and nonlamellar single-chain lipids: Preparation and characterization

This work aimed at preparing new nanoscale assemblies based on an amphiphilic bio-esterified β-cyclodextrin (β-CD), substituted at the secondary face with n-decanoic fatty acid chains (β-CD-C₁₀), and monoolein (MO) as new carriers for parenteral drug delivery. Stable binary (β-CD-C₁₀/MO) and ternary (β-CD-C₁₀/MO/stabilizer) nanoscale assemblies close to 100nm in size were successfully prepared in water by the solvent displacement method. The generated nanoparticles were fully characterized by dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, residual solvent analysis, complement activation and the contribution of each formulation parameter was determined by principal component analysis. The β-CD-C₁₀ units were shown to self-organize into nanoparticles with a hexagonal supramolecular packing that was significantly modulated by the molar ratio of the constituents and the presence of a steric or electrostatic stabilizer (DOPE-PEG₂₀₀₀ or DOPA/POPA, respectively). Indeed, nanoparticles differing in morphology and in hexagonal lattice parameters were obtained while the co-existence of multiple mesophases was observed in some formulations, in particular for the β-CD-C₁₀/MO/DOPA and β-CD-C₁₀/MO/POPA systems. The mixed β-CD-C₁₀/MO/DOPE-PEG₂₀₀₀ nanoparticles (49:49:2 in mol%) appeared to be the most suitable for use as a drug delivery system since they contained a very low amount of residual solvent and showed a low level of complement C3 activation.

Super-swelled lyotropic single crystals

Lipids self-assemble into diverse supramolecular structures that exhibit thermotropic and/or lyotropic behavior. Lyotropic mesophases, where membranes conform to periodic minimal surfaces dividing two nonpenetrating aqueous subspaces, are arguably one of the most intriguing phases of lipid materials. Traditional 3D bicontinuous cubic lipid materials appear as a polycrystal of varying degrees of order. When exposed to water, the properties of the molecular building blocks of the membrane determine specific swelling limits setting the lattice dimensions at about 15 nm. This limited swelling severely impairs their application as delivery vehicles of large drugs or as matrices for guiding protein crystallization. We report the discovery of self-assembly strategies leading to the emergence of lipid bicontinuous single crystals with unprecedented swelling capacity. The conventional strategy to increase unit cell size is tweaking membrane composition to include charged building blocks, a process to achieve electrostatic-driven swelling. In this paper, we demonstrate that controlling self-assembly external conditions when coupled to membrane composition yields 3D bicontinuous cubic phases that swell up to lattice dimensions of 68 nm. Importantly, and contrary to what is perceived for soft lyotropic materials in general, the self-assembly methodology enables the development of large super-swelled monocrystals. Utilizing small-angle X-ray scattering and cryoelectron microscopy, we underpin three crucial factors dictating the stabilization of super-swelled lipid bicontinuous cubic single crystals: (i) organic solvent drying speed, (ii) membrane charge density, and (iii) polyethylene glycol-conjugated lipids amount.

Effects of Cations on the Behaviour of Lipid Cubic Phases

Inverse bicontinuous cubic structures formed by lipids have been demonstrated in a wide variety of applications, from a host matrix for proteins for crystallisation, to templates for nanoscale structures. Recent work has focused on tuning their properties to realize such applications, often by manipulating the structure by introducing other lipids with different properties such as charge or packing. However, they are often prepared in the presence of solutions containing salt, counteracting the effects, for example, charged lipids, and fundamentally changing the structures obtained. Here, we demonstrate the delicate interplay between electrostatic swelling in bicontinuous structures formed by monoolein (MO) doped with both negatively charged dioleyl phosphatidylglycerol (DOPG), and zwitterionic dioleyl phosphatidylethanolamine (DOPE), with the addition of mono- and divalent salts. The effect of adding salt to the charged phase changes the structure from the primitive cubic (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\bf{Q}}}_{II}^{P}$$\end{document}QIIP) to the double diamond phase (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\bf{Q}}}_{II}^{D}$$\end{document}QIID) whilst still allowing for modest increases in lattice parameter of up to a nanometer. Contrasting this, the addition of salts to the non-charged phase, has minimal effect on the lattice parameter but now the transition from the (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\bf{Q}}}_{II}^{D}$$\end{document}QIID) to the inverse hexagonal phase (H_II) is observed occurring at higher mole fractions of DOPE than in pure water.