Adsorption/desorption kinetics and breakthrough of gaseous toluene for modified microporous-mesoporous UiO-66 metal organic framework

Insights into the Adsorption of VOCs on a Cobalt-Adeninate Metal-Organic Framework (Bio-MOF-11)

With increasingly severe air pollution brought by volatile organic compounds (VOCs), the search for efficient adsorbents toward VOC removal is of great significance. Herein, an adenine-based metal-organic framework, namely, bio-MOF-11 [Co₂(ad)₂(CH₃CO₂)₂·0.3EtOH·0.6H₂O, ad = adeninate], was synthesized via a facile method, and its VOC adsorption was reported for the first time. This novel bio-MOF-11 was investigated by employing four common VOCs (i.e., methanol, acetone, benzene, and toluene) as adsorbates. The saturated adsorption capacity of these targeted VOCs on bio-MOF-11 was estimated to be 0.73-3.57 mmol/g, following the order: toluene < benzene < acetone < methanol. Furthermore, with the adsorption temperature increasing from 288 to 308 K, the saturated adsorption capacity was reduced by 7.3-35.6%. It is worth noting that acetone adsorption is most sensitive to temperature ascribed to its low boiling point and strong polar nature. Meanwhile, owing to the molecular sieve effect, the adsorption capacity appears negatively correlated to the size of VOC molecules. Besides, the abundant exposed nitrogen atoms and amino groups in bio-MOF-11 cavities facilitate the adsorption of polar VOC molecules. This work promotes the fundamental understanding and practical application of bio-MOF for adsorptive removal of VOCs.

Synthesis of ordered microporous/macroporous MOF-808 through modulator-induced defect-formation, and surfactant self-assembly strategies

Ordered materials with interconnected porosity allow the diffusion of molecules within their inner porous structure to access the active sites located in the microporous core. As a follow-up of our work on engineering of MOF-808, in this contribution, we study the synthesis of defective MOF-808 using two different strategies: the use of modulators and the surfactant-assisted synthesis to obtain materials with ordered and interconnected pores. The results of the study indicated that (i) the use of modulators of different chain length led to the formation of microporous/mesoporous MOFs through the formation of missing linker defects. However, the use of the acetic acid contributes to the formation of MOFs with larger mesoporous size distributions compared to materials synthesized with formic and propionic acids as modulators, and (ii) the self-assembly of CTAB surfactant produced an ordered microporous/macroporous network which enhanced crystallinity. However, the surface properties of the materials seem to be unaffected by the use of surfactants during synthesis. These results contribute to the development of ordered materials with a broad range of pore size distributions and give rise to new opportunities to extend the applications of MOF-808.

Tuning oxygen vacancy concentration of MnO2 through metal doping for improved toluene oxidation

Oxygen vacancy acts an important role in adjusting the chemical properties of MnO₂. In this paper, two-dimensional MnO₂ catalysts with different oxygen vacancy concentration are obtained by doping Cu²⁺. It is researched that the K⁺ species in the interlayer of birnessite-type MnO₂ can be substituted during the Cu²⁺ doping process. Meanwhile, this process will generate the oxygen vacancy. Interestingly, the formation of an appropriate numbers of oxygen vacancy in MnO₂ distinctly enhances the low-temperature reducibility and oxygen species activity, which improves the catalytic activity for the toluene oxidation (T₁₀₀ = 220 °C, E_a=43.6 kJ/mol). However, an excessive concentration of oxygen vacancy in MnO₂ sample performs against the activity improvement for toluene oxidation. In situ DRIFTS are applied to elucidate the main intermediates and conversion pathway on MnO₂-OV3 with moderate concentration of oxygen vacancy. The results demonstrate that the adsorbed toluene can interact with oxygen species of catalyst to form physisorbed benzaldehyde, aldehydic adsorbate and benzoate species. In addition, it is found that the oxygen vacancy concentration plays an important effect on the oxidation of benzoate species owing to the acceleration effect of oxygen vacancy in the activation of gaseous oxygen.

Enhancement of ionizing radiation-induced catalytic degradation of antibiotics using Fe/C nanomaterials derived from Fe-based MOFs

In present work, we studied a novel Fe/C nanomaterial fabricated using Fe-based metal organic frameworks (MOFs) as precursors through thermal pyrolysis to catalyze gamma irradiation-induced degradation of antibiotics, cephalosporin C (CEP-C) and sulfamethazine (SMT) in aqueous solution. The MOFs-derived Fe/C nanomaterials (DMOFs) had the regular octahedrons structure of MOFs and contained element C, Fe and O, while Fe° with a fraction of Fe₃O₄ and Fe₂O₃ were identified. Results showed that DMOFs addition could accelerate the generation of OH during gamma irradiation, while the intermediates of bonds cleavages of antibiotic molecules and OH addition were identified. DMOFs were more effective to improve the decomposition of antibiotic having the higher adsorption capacity like SMT. The degradation rate of CEP-C and SMT increased by 1.3 times and 1.8 times, and TOC reduction at 1.0 kGy reached 42 % and 51 %, respectively by gamma/DMOFs treatment, while only 20.2 % (CEP-C) and 4.5 % (SMT) of TOC reduction were obtained by γ-irradiation alone. The crystal structure, functional groups and magnetism of DMOFs changed slightly after gamma irradiation, which made it possible to be reused. DMOFs were promising to enhance the degradation of antibiotics during gamma irradiation.

Highly efficient and acid-resistant metal-organic frameworks of MIL-101(Cr)-NH2 for Pd(II) and Pt(IV) recovery from acidic solutions: Adsorption experiments, spectroscopic analyses, and theoretical computations

Cr-based metal-organic frameworks (MOFs) of MIL-101(Cr)-NH₂ was post-synthesized from nitro-functionalized MIL-101(Cr) (MIL-101(Cr)-NO₂) through a reduction process. Adsorption behaviors and interactions of MIL-101(Cr)-NH₂ and MIL-101(Cr)-NO₂ with platinum group metal (PGM) anions of Pd(II) (PdCl₄^2-) and Pt(IV) (PtCl₆^2-), were investigated through batch adsorption experiments, spectroscopic analyses, and theoretical computations. According to adsorption kinetics and isotherms, the uptakes of Pd(II) and Pt(IV) by in MIL-101(Cr)-NH₂ were found to be much higher than their uptakes by MIL-101(Cr)-NO₂. The abundant protonated amine groups (BDC-NH₃⁺) in MIL-101(Cr)-NH₂ were verified to be the main adsorptive binding sites by XPS and FTIR spectroscopy, and FE-SEM imageries. Additionally, BDC-NH₃⁺ shows extremely high affinities (b value) and binding energies (E_bind) for PdCl₄^2- and PtCl₆^2- through electrostatic attraction, resulting in much higher adsorption capacities of MIL-101(Cr)-NH₂ for these PGMs as compared to those of MIL-101(Cr)-NO₂. Moreover, the MOFs' Cr nodes without terminal -OH indicated positive electrostatic potentials, and certain values of E_bind for PGM anions. Thus, the few-amount cationic Cr sites could also make little contributions to the adsorption of PGM anions in MIL-101(Cr)-NH₂ or MIL-101(Cr)-NO₂. Furthermore, the perfect regeneration and reusability of MIL-101(Cr)-NH₂ over five of adsorption-desorption cycles, suggesting its potential in practical applications.

Confined Heteropoly Blues in Defected Zr-MOF (Bottle Around Ship) for High-Efficiency Oxidative Desulfurization

The Keggin-type polyoxometalates (POMs) are effective catalysts for oxidative desulfurization (ODS) and confining these POMs in metal-organic frameworks (MOFs) is a promising strategy to improve their performances. Herein, postsynthetic modification of POMs confined in MOFs by adding thiourea creates more unsaturated metal sites as defects, promoting ODS catalytic activity. Additional modification by confining 1-butyl-3-methyl imidazolium POMs in MOFs is performed to obtain higher ODS activity, owing to the affinity between electron-rich thiophene-based compounds and electrophilic imidazolium compounds. The ODS catalytic activities of four Zr-MOF-based composites (bottle around ship) including phosphomolybdate acid (PMA)/UiO-66, [Bmim]₃ PMo₁₂ O₄₀ /UiO-66, PMA/Thiourea/UiO-66, and [Bmim]₃ PMo₁₂ O₄₀ /Thiourea/UiO-66 are therefore investigated in detail. In order to explore the catalytic mechanism of these MOF composites, their microstructures and electronic structures are probed by various techniques such as X-ray diffraction, thermogravimetric analysis, Fourier transform infrared, Raman, scanning electron microscope, transmission electron microscope, BET, X-ray photoelectron spectroscopy, EPR, UV-vis, NMR spectra, and H₂ -temperature-programmed reduction. The results reveal that phosphomolybdate blues and imidazolium phosphomolybdate blues with different Mo⁵⁺ /Mo⁶⁺ ratios with the Keggin structure are confined in defected UiO-66 for all four composites. This approach can be applied to design and synthesize other POMs/MOFs composites as efficient catalysts.

Efficient extraction of aromatic amines in the air by the needle trap device packed with the zirconium based metal-organic framework sorbent

In this study, development of a needle trap device (NTD) packed with UiO-66 adsorbent was used for the sampling of the aromatic amine compounds (including aniline, N,N-dimethylaniline and o-toluidine) followed by gas chromatography (GC) with flame-ionization detector (FID) analysis. The UiO-66 sorbent was synthesized and then packed inside a spinal needle (Gauge 22). The synthesized sorbent was characterized with the XRD, FE-SEM, EDS and FT-IR techniques. This study was conducted both in the laboratory and in the real samples. In the laboratory, the sampling parameters (such as temperature and humidity) and desorption parameters (including desorption temperature and desorption time) were optimized using Response Surface Methodology (RSM) by Central Composite Design (CCD). The results indicated that the performance of the sampling device decreased with increasing the sampling humidity and temperature. Moreover, the highest peak area responses of the studied analytes were observed at a desorption time of 3 minutes and desorption temperature of 270 °C. The values of the limit of detection (LOD) and limit of quantitation (LOQ) were in the range 0.01-0.02 and 0.03-0.05 ng mL-1, respectively. Our findings demonstrated that NTD packed with synthesized UiO-66 has good repeatability (RSD = 1.3-6.8%) and acceptable reproducibility (with three NTDs) (RSD = 1.3-9.7%). Comparison of the results between NTD-UiO-66 and NIOSH2002 showed a sufficient correlation (0.98-0.99) between two methods. Therefore, the results indicated that the NTD packed with the UiO-66 adsorbent can be used as a powerful technique for occupational and environmental monitoring.

Three-dimensionally macroporous MnZrOx catalysts for propane combustion: Synergistic structure and doping effects on physicochemical and catalytic properties

Three-dimensionally macroporous (3DM) MnZrO_x catalysts were fabricated to reveal the structure and Zr-doping effects on both physicochemical properties and propane combustion behaviors. The increasing addition of zirconium is favorable for the formation of 3DM structure and amorphous Mn-Zr solid solution, leading to tunable physicochemical properties. The significant activity improvement after zirconium addition was originally attributable to the superior redox ability, higher oxygen mobility and more abundant oxygen vacancy. The excellent catalytic activity, cycling stability and water resistant ability over 3DM Mn_0.6Zr_0.4O_x make it a promising material for hydrocarbons elimination. The comparative TPSR, in situ DRIFTs and kinetics study over 3DM and bulk catalysts emphasize the advantageous function of 3DM architecture on promoting propane adsorption, oxidation and lattice oxygen mobility.

Decolourization of crystal violet using nano-sized novel fluorite structure Ga2Zr2-x W x O7 photocatalyst under visible light irradiation

Fluorite-type Zr-based oxides with the composition Ga2Zr2-x W x O7 (x = 0, 0.05, 0.1, 0.15 and 0.2) were prepared using the citrate technique. Appropriate characterizations of all prepared materials were carried out. X-ray diffraction clarified that the undoped and W-doped Ga2Zr2O7 samples were crystallized in the cubic fluorite phase structure. The average particle size of the samples was in the range of 3-8 nm. The lowest band gap (1.7 eV) and the highest surface area (124.3 m2 g-1) were recorded for Ga2Zr0.85W0.15O7. The photocatalytic impacts of the prepared systems were studied by removal of crystal violet (CV) dye employing visible light illumination and taking into consideration the initial dye concentrations, duration of visible irradiation treatment, catalysts dose and the dopant concentration. The obtained results showed higher dye removal with the boost of the catalyst dosage. W doping shifted the absorption to the visible light range by decreasing the band gap from 4.95 eV for parent Ga2Zr2O7 to 1.7 eV for 15 mol% tungsten-doped Ga2Zr2O7 enhancing the photocatalytic decolourization of CV from 4.2% to 83.6% for undoped and 15 mol% W-doped Ga2Zr2O7, respectively, at optimum operating conditions (pH 9, 1 g l-1 catalyst dose and 300 min) while heavily doped W sample containing 20 mol% W showed lower removal than 15 mol% W-doped Ga2Zr2O7. Complete CV degradation using 15 mol% W-doped Ga2Zr2O7 was attained with the assistance of 25 mmol l-1 hydrogen peroxide. The reaction is aligned to pseudo-first-order kinetics. Different scavengers were introduced to decide the significance of the reactive species in CV degradation. O 2 - ∙ and h + had the major role in the degradation of CV by Ga2Zr2-x W x O7 system compared with HO•.

Synthesis and application of Cu-BTC@ZSM-5 composites as effective adsorbents for removal of toluene gas under moist ambience: kinetics, thermodynamics, and mechanism studies

Metal organic frameworks (MOFs) are excellent adsorbents that provide abundant specific surface area, adjustable pore structure, and rich active sites. The purpose of this study was to prepare composites with hydrophobic and high microporous specific surface area and to adsorb toluene gas in moist ambience. An ethanol activation-assisted hydrothermal method was proposed to synthesize copper-benzene-1,3,5-tricarboxylic acid (Cu-BTC) metal-organic framework, Cu-BTC, and ZSM-5 molecular sieve composites (Cu-BTC@ZSM-5). The dynamic adsorption process of toluene on different adsorbents was investigated, and the results showed that the toluene adsorption capacity of Cu-BTC@ZSM-5 (158.6 mg/g) was 2.53 times higher than Cu-BTC (62.7 mg/g), when the ZSM-5 content is 5% and the humidity is 30%RH. Compared with other factors, the humidity inhibited the adsorption of toluene on Cu-BTC@ZSM-5. Langmuir model and the pseudo-second kinetics model can better describe the adsorption behavior of Cu-BTC@ZSM-5. The thermodynamic results showed the adsorption process was a spontaneous exothermic process at low temperature and mainly physical adsorption. The relative regenerability can still up to 80.4% after six cycles. The adsorption mechanisms of Cu-BTC@ZSM-5 were pore-filling adsorption, π-π interaction, cation-π bonding, and hydrophobic interactions. This study will help to design a systematic route to evaluate the adsorption performance of Cu-BTC@ZSM-5 for toluene.

An Emerging Visible-Light Organic-Inorganic Hybrid Perovskite for Photocatalytic Applications

The development of visible-light active photocatalysts is a current challenge especially energy and environmental-related fields. Herein, methylammonium lead iodide perovskite (MAIPb) was chosen as the novel semiconductor material for its ability of absorbing visible-light. An easily reproducible and efficient method was employed to synthesize the as-mentioned material. The sample was characterized by various techniques and has been used as visible-light photocatalyst for degradation of two model pollutants: rhodamine B (RhB) and methylene-blue (MB). The photo-degradation of RhB was found to achieve about 65% after 180 min of treatment. Moreover, the efficiency was enhanced to 100% by assisting the process with a small amount of H2O2. The visible-light activity of the photocatalyst was attributed to its ability to absorb light as well as to enhance separation of photogenerated carriers. The main outcome of the present work is the investigation of a hybrid perovskite as photocatalyst for wastewater treatment.

A redox-active covalent organic framework for the efficient detection and removal of hydrazine

The removal and detection of soluble hydrazine is of importance due to its harm to soil and subterranean water, but challenging. Herein, we preferentially disposed a porous and redox active covalent-organic framework (DAAQ-TFP COF, denoted as DQ-COF) to simultaneously removal and detect hydrazine. Electroactive sites (anthraquinone units) can be intelligently incorporated into the channel walls/pores of COF. DQ-COF has high crystallinity and good thermal stability, and DQ-COF dropped onto nickel matrix (DQ-COF/Ni composite) still retains high surface area, characterized by PXRD, FT-IR, nitrogen adsorption and TGA. Subsequently, a detailed study of DQ-COF towards hydrazine uptake and detection potentials is explored. DQ-COF as adsorbent unfolds strong removal ability towards hydrazine, the maximum removal capacity of which is up to 1108 mg g^-1, following Friedrich and pseudo-second-order kinetic models. Meanwhile, the DQ-COF supported on nickel renders attractive electrochemical properties, which is efficiently responsive to hydrazine at a part per billion (ppb) level, coupled with a wide linear range (0.5 ˜ 1223 μM), low detection limit (0.07 μM) and high anti-interference ability. There is no other COFs with such a favorable capability in synchronous removal and selective detection towards hydrazine, probably applying in superintending water quality and disposing wastewater.

High-Performance Ag-Cu Nanoalloy Catalyst for the Selective Catalytic Oxidation of Ammonia

High-performance Ag-Cu alloy nanoparticles (NPs) were successfully synthesized by a solventless mix-bake-wash method and tested for NH₃-SCO. The prepared Ag₂Cu₁ catalyst with a perfect Ag-Cu alloy structure exhibited better T₁₀₀ (200 °C, the temperature at which 100% NH₃ conversion was obtained), higher reaction rates, and lower E_a compared to that with ordinary bimetallic Ag-Cu (AgCuO_x). The characterization data revealed much smaller Ag-Cu alloy nanoparticles of the Ag₂Cu₁ catalyst and more Ag/Cu metallic species on the surface, which can increase the amount of chemisorbed surface oxygen (O_β) and enhance NH₃ adsorption and activation in the low-temperature range, therefore leading to a much higher NH₃-SCO activity. Kinetic studies and density functional theory calculations indicated that Cu decoration at Ag by Ag-Cu alloying could enhance the adsorption/activation of NH₃ and O₂. It has been found that O₂ was more easily transformed from the adsorption state to the transition state than NH₃, which enhanced the performance of NH₃ oxidation. In addition, the Ag₂Cu₁ catalyst exhibited excellent durability because of the stabilization of Ag sites by the Ag-Cu alloy structure.

Porous Zr-Based Metal-Organic Frameworks (Zr-MOFs)-Incorporated Thin-Film Nanocomposite Membrane toward Enhanced Desalination Performance

Four different thin-film nanocomposite (TFN) membranes were prepared by adding different concentrations of porous Zr-metal-organic frameworks (MOFs) (UiO-66 and UiO-66-NH₂) to piperazine aqueous solution (aqueous phase) or 1,3,5-benzenetricarbonyl trichloride-n-hexane solution (organic phase) by interfacial polymerization. The main purpose is to study the specific effects of different addition methods and addition amounts of nanoparticles on the structure and performance of the TFN membranes by interfacial polymerization. All four TFN membranes exhibited a higher water permeability while maintaining high salt rejection compared to thin-film composite membrane. On the one hand, the TFN membranes behave differently, which are prepared by adding the same kind of nanoparticles to the aqueous phase or organic phase, respectively. The TFN membrane prepared by adding 0.2 w/v% UiO-66 to the organic phase had a high water flux of 87.86 L m^-2 h^-1, compared to 46.31 L m^-2 h^-1 of the membrane prepared by adding 0.3 w/v% UiO-66 in the aqueous phase. This is due to the fact that UiO-66 greatly slows the interfacial polymerization rate when UiO-66 is added to the organic phase, resulting in a thinner and wider-aperture polyamide thin-film layer, reducing the water transmission resistance during filtration. Therefore, it is more economical by adding nanoparticles to organic phase than aqueous phase under the same filtering effect. On the other hand, different nanoparticles can also cause differences in performance and structure of the TFN membranes even in the same preparation manner. TFN membrane with UiO-66-NH₂ in the aqueous phase has higher water permeance than the one with UiO-66 in the aqueous phase, owing to the good hydrophilicity of the amino group, which improves the water dispersibility of UiO-66-NH₂ so that the TFN membrane is more uniform. In addition, UiO-66-NH₂ slows down the process of interface polymerization, making the membrane more porous. The monomers in the aqueous phase and organic phase can be adsorbed in the pores of Zr-MOFs, which makes the interfacial polymerization occur both in the pores and on the surface of the pores. Thus, the compatibility between the polyamide and MOFs was enhanced and less defects were formed in the thin-film layer, resulting in a high salt rejection even when the concentration of Zr-MOFs increased. This is the first time to explain that polyamide membrane has not obvious salt rejection attenuation with increasing porous material content using pore adsorption reaction monomer principle. Also, the Zr-MOFs-based TFN membrane exhibited good heat resistance and antifouling property. This work shows that porous Zr-MOFs nanomaterials have significant advantages in the development of nanofiltration membranes with high water flux and rejection.

Hierarchically porous metal–organic frameworks: synthetic strategies and applications

Despite numerous advantages, applications of conventional microporous metal–organic frameworks (MOFs) are hampered by their limited pore sizes, such as in heterogeneous catalysis and guest delivery, which usually involve large molecules. Construction of hierarchically porous MOFs (HP-MOFs) is vital to achieve the controllable augmentation of MOF pore size to mesopores or even macropores, which can enhance the diffusion kinetics of guests and improve the storage capacity. This review article focuses on recent advances in the methodology of HP-MOF synthesis, covering preparation of HP-MOFs with intrinsic hierarchical pores, and modulated, templated and template-free synthetic strategies for HP-MOFs. The key factors which affect the formation of HP-MOF architectures are summarized and discussed, followed by a brief review of their applications in heterogeneous catalysis and guest encapsulation. Overall, this review presents a roadmap that will guide the future design and development of HP-MOF materials with molecular precision and mesoscopic complexity.

Novel Hierarchical Fe(III)-Doped Cu-MOFs With Enhanced Adsorption of Benzene Vapor

New hierarchical Fe(III)-doped Cu-MOFs (Fe-HK) were developed via introduction of Fe³⁺ ions during HKUST-1 synthesis. The obtained products were characterized by N₂ adsorption, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, FTIR spectroscopy, and thermal analysis. The adsorption isotherms and kinetics of benzene vapor were measured and consecutive adsorption–desorption cycles were performed. It was found that the hierarchical-pore Fe-HK-2 exhibited optimal textural properties with high BET surface area of 1,707 m²/g and total pore volume of 0.93 cm³/g, which were higher than those of the unmodified HKUST-1. Significantly, the hierarchical-pore Fe-HK-2 possessed outstanding benzene adsorption capacity, which was 1.5 times greater than the value on HKUST-1. Benzene diffusivity of Fe-HK-2 was 1.7 times faster than that of parent HKUST-1. Furthermore, the benzene adsorption on Fe-HK-2 was highly reversible. The hierarchical-pore Fe-HK-2 with high porosity, outstanding adsorption capacity, enhanced diffusion rate, and excellent reversibility might be an attractive candidate for VOCs adsorption. This may offer a simple and effective strategy to synthesize hierarchical-pore MOFs by doping with other metal ions.

Probing the photo- and electro-catalytic degradation mechanism of methylene blue dye over ZIF-derived ZnO

Due to the severe water pollution from effluent dyes, the need of the hour is to find a suitable dye degradation technology, and appropriate catalyst materials. Semiconducting ZnO was produced by pyrolysis of ZIF-8 template. The materials were well characterized with in situ and ex situ XRD and TGA, FE-SEM, HRTEM, UV-DRS, PL, and FRET. The results showed that upon calcination the body centered cubic ZIF-8 produces hexagonal primitive ZnO while retaining the truncated cubic shaped particles. The materials were screened for photo- and electro-catalytic oxidation of methylene blue. In both the different degradation technologies, ZnO synthesized from ZIF-8 outperformed the ZIF-8. The FRET dynamics showed significant spectral overlap of ZnO emission and the methylene blue absorption. It was found to be responsible for the better photocatalytic efficacy of ZnO samples than ZIF-8. The proposed reaction mechanism showed that the surface-bound reactive oxygen species produced either by light exposure or due to applied bias is key to dye degradation. The cytotoxicity of the untreated and ZnO and ZIF-8 treated dye over melanoma cells was evaluated, and it was found that the cytotoxicity of the degraded dye from ZIF-derived ZnO was less compared to that of ZIF-8 treated one.

Tuning porosity in macroscopic monolithic metal-organic frameworks for exceptional natural gas storage

Widespread access to greener energy is required in order to mitigate the effects of climate change. A significant barrier to cleaner natural gas usage lies in the safety/efficiency limitations of storage technology. Despite highly porous metal-organic frameworks (MOFs) demonstrating record-breaking gas-storage capacities, their conventionally powdered morphology renders them non-viable. Traditional powder shaping utilising high pressure or chemical binders collapses porosity or creates low-density structures with reduced volumetric adsorption capacity. Here, we report the engineering of one of the most stable MOFs, Zr-UiO-66, without applying pressure or binders. The process yields centimetre-sized monoliths, displaying high microporosity and bulk density. We report the inclusion of variable, narrow mesopore volumes to the monoliths’ macrostructure and use this to optimise the pore-size distribution for gas uptake. The optimised mixed meso/microporous monoliths demonstrate Type II adsorption isotherms to achieve benchmark volumetric working capacities for methane and carbon dioxide. This represents a critical advance in the design of air-stable, conformed MOFs for commercial gas storage.

While metal–organic frameworks exhibit record-breaking gas storage capacities, their typically powdered form hinders their industrial applicability. Here, the authors engineer UiO-66 into centimetre-sized monoliths with optimal pore-size distributions, achieving benchmark volumetric working capacities for both CH₄ and CO₂.

Morphology and Crystal-Plane Effects of Fe/W-CeO2 for Selective Catalytic Reduction of NO with NH3

The CeO2 ordinary amorphous, nanopolyhedrons, nanorods, and nanocubes were prefabricated by the hydrothermal method, and employed as carriers of Fe/W–CeO2 catalysts to selectively catalyze the reduction of NO with ammonia. Characterization results indicated that the morphology of CeO2 support originated from selectively exposing different crystal surfaces, which has a significant effect on oxygen vacancies, acid sites and the dispersion of Fe2O3. The CeO2 nanopolyhedrons catalyst (Fe/W–CeO2–P) showed most oxygen vacancies, the largest the quantity of acid sites, the largest BET (Brunauer-Emmett-Teller) surface area and the best dispersion of Fe2O3, which was associated with predominately exposing CeO2 (111) planes. Consequently, the Fe/W–CeO2–P catalyst has the highest NO conversion rate in the temperature range of 100–325 °C among the ordinary amorphous, nanorods, and nanocubes Fe/W–CeO2 catalysts.

Aerobic oxidation of fluorene to fluorenone over Co–Cu bimetal oxides

Aerobic oxidation of fluorene to fluorenone was achieved over Co–Cu bimetal oxides using O₂ as an oxidant in the absence of a radical initiator. Co–Cu bimetal oxides showed better catalytic performance than CuO and Co₃O₄.

Plasmon Ag and CdS quantum dot co-decorated 3D hierarchical ball-flower-like Bi5O7I nanosheets as tandem heterojunctions for enhanced photothermal–photocatalytic performance

Bi₅O₇I/Ag/CdS tandem heterojunction photocatalysts show excellent photothermal and photocatalytic performance, which is attributed to the formation of tandem heterojunctions, surface plasmon resonance, and 3D hierarchical structure.

Heterojunction Cu2O/RGO/BiVO4 ternary nanocomposites with enhanced photocatalytic activities towards degradation of rhodamine B and tetracycline hydrochloride

The synergy of BVO, Cu₂O and RGO inhibits the recombination of photogenic carriers to enhance the photocatalytic activity.

Enhanced hydrophobic UiO-66 (University of Oslo 66) metal-organic framework with high capacity and selectivity for toluene capture from high humid air

Metal organic frameworks (MOFs) are good absorbents that provide high specific surface area, modified pore surface and controllable pore size. The aim of this work is to prepare a MOFs material with good toluene adsorption property in the presence of water. In this paper, modified UiO-66 (University of Oslo 66) was successfully synthesized with polyvinylpyrrolidone (PVP) as structure-directing agent by a simple solvothermal method. The physical and chemical properties were obtained by a series of characterization instruments. Some missing-linker defect sites were observed on modified materials (defective UiO-66) and were known as the main active sites for toluene adsorption. The defective UiO-66 (PVP-U-0.5, 259 mg g^-1) demonstrated 1.7 times toluene adsorption capacity of the pristine UiO-66 (151 mg g^-1) when the PVP/Zr⁴⁺ ratio was 0.5. The interactions between toluene and UiO-66 and PVP-U-0.5 were assessed through the Henry's law constant (K_H) and the isosteric adsorption heat (ΔH_ads), which indicated that stronger interaction between PVP-U-0.5 and toluene molecules. Moreover, PVP-U-0.5 displayed good adsorption capacity (84 mg g^-1) at high relative humidity (70% RH). Water temperature programmed desorption experiments revealed that PVP-U-0.5 had more hydrophobic property, which provided a further possibility for practical application for the removal of toluene.