Catalytic DNA: Scope, Applications, and Biochemistry of Deoxyribozymes

Porphyrin metalation catalyzed by DNAzymes and nanozymes

In this review, DNA and nanomaterial based catalysts for porphyrin metalation reactions are summarized, including the selection of DNAzymes, choice of nanomaterials, their catalytic mechanisms, and applications of the reactions.

Functional Nucleic Acid-Based Live-Cell Fluorescence Imaging

Cell is the structural and functional unit of organism. It serves as a key research object in various biological processes, such as growth, ontogeny, metabolism and stress. Studying the spatiotemporal distribution and functional activity of specific biological molecules in living cells is crucial for exploring the mechanism governing life. It also facilitates the elucidation of pathogenesis, clinical prevention and disease theranostics. In recent years, the fluorescence imaging technique has been greatly exploited for live-cell imaging. However, the development of molecular probes has lagged far behind. Functional nucleic acids (FNAs), for example, aptamer and DNAzyme, possess special chemical and/or biological functions, hence severing as promising molecular tools for cellular imaging. The current mini review focuses on the applications of FNAs in live-cell fluorescence imaging.

High-Throughput Analysis and Engineering of Ribozymes and Deoxyribozymes by Sequencing

Ribozymes and deoxyribozymes are catalytic RNA and DNA, respectively, that catalyze chemical reactions such as self-cleavage or ligation reactions. While some ribozymes are found in nature, a larger variety of ribozymes and deoxyribozymes have been discovered by in vitro selection from random sequences. These catalytic nucleic acids, especially ribozymes, are of fundamental interest because they are crucial for the RNA world hypothesis, which suggests that RNA played a central role in both the propagation of genetic information and catalyzing metabolic reactions in primordial life prior to the emergence of proteins and DNA. On the practical side, catalytic nucleic acids have been extensively engineered for various applications, such as biosensors and genetic devices for synthetic biology. Therefore, it is important to gain a deeper understanding of the sequence-function relationships of ribozymes and deoxyribozymes.Mutational analysis, or measurements of activities of catalytic nucleic acid mutants, is one of the most fundamental approaches for that purpose. Mutations that abolish, reduce, retain, or even increase activity provide useful information about nucleic acid catalysts for engineering and other purposes. However, methods for mutational analysis of ribozymes and deoxyribozymes have not evolved much for decades, requiring tedious and low-throughput assays (e.g., gel electrophoresis) of individually prepared mutants. This has prevented researchers from performing quantitative mutational analysis of ribozymes and deoxyribozymes on a large scale.To address this limitation, we developed a massively parallel ribozyme and deoxyribozyme assay strategy that allows >10⁴ assays using high-throughput sequencing (HTS). We used HTS to literally count the number of cleaved (or ligated) and uncleaved (or unligated) ribozyme (or deoxyribozyme) sequences and calculated the activities of each mutant in a reaction mixture. This simple yet powerful strategy was applied to analyze the mutational effects of various natural and synthetic ribozymes and deoxyribozymes at scales impossible for conventional mutational analysis. These large-scale sequence-function data sets were used to better understand the functional consequences of mutations and to engineer ribozymes for practical applications. Furthermore, these newly available data are motivating researchers to employ more rigorous computational methods to extract additional insights such as structural information and nonlinear effects of multiple mutations. The new HTS-based assay strategy is distinct from and complementary to a related strategy that uses HTS to analyze ribozyme and deoxyribozyme populations subjected to in vitro selection. Postselection sequencing can cover a larger sequence space, although it does not directly quantify the activities of ribozyme and deoxyribozyme mutants. With further advances in DNA sequencing technologies and computational methods, there should be more opportunities to harness the power of HTS to deepen our understanding of catalytic nucleic acids and enhance our ability to engineer them for even more applications.

Recent advances of DNAzyme-based nanotherapeutic platform in cancer gene therapy

Deoxyribozyme (or denoted as DNAzyme), which is produced by in vitro screening technology, has gained extensive research interest in the field of biomedicine due to its high catalytic activity and structure identification. This review introduces the structural characteristics of RNA-cleaving DNAzyme and its application potential in cancer gene therapy, which plays a significant role in cancer-related gene inactivation by specifically cleaving target mRNA and inhibiting the expression of the corresponding protein. However, the low delivery efficiency and cellular uptake hindered the widespread usage of DNAzyme in gene therapy of cancers. Emerging nanotechnology holds great promise for DNAzyme to overcome these obstacles. This review mainly focuses on DNAzyme-based nanotherapeutic platforms in gene therapy of cancers, including oncogene antagonism therapy, treatment resistance gene therapy, immunogene therapy, and antiangiogenesis gene therapy. We also revealed the potential of DNAzyme-based nanotherapeutic platforms as emerging cancer therapy approaches and their security issues.

Influence of monovalent metal ions on metal binding and catalytic activity of the 10-23 DNAzyme

Deoxyribozymes (DNAzymes) are single-stranded DNA molecules that catalyze a broad range of chemical reactions. The 10-23 DNAzyme catalyzes the cleavage of RNA strands and can be designed to cleave essentially any target RNA, which makes it particularly interesting for therapeutic and biosensing applications. The activity of this DNAzyme in vitro is considerably higher than in cells, which was suggested to be a result of the low intracellular concentration of bioavailable divalent cations. While the interaction of the 10-23 DNAzyme with divalent metal ions was studied extensively, the influence of monovalent metal ions on its activity remains poorly understood. Here, we characterize the influence of monovalent and divalent cations on the 10-23 DNAzyme utilizing functional and biophysical techniques. Our results show that Na⁺ and K⁺ affect the binding of divalent metal ions to the DNAzyme:RNA complex and considerably modulate the reaction rates of RNA cleavage. We observe an opposite effect of high levels of Na⁺ and K⁺ concentrations on Mg²⁺- and Mn²⁺-induced reactions, revealing a different interplay of these metals in catalysis. Based on these findings, we propose a model for the interaction of metal ions with the DNAzyme:RNA complex.

Zn2+ -Dependent DNAzymes: From Solution Chemistry to Analytical, Materials and Therapeutic Applications

Since 1994, deoxyribozymes or DNAzymes have been in vitro selected to catalyze various types of reactions. Metal ions play a critical role in DNAzyme catalysis, and Zn²⁺ is a very important one among them. Zn²⁺ has good biocompatibility and can be used for intracellular applications. Chemically, Zn²⁺ is a Lewis acid and it can bind to both the phosphate backbone and the nucleobases of DNA. Zn²⁺ undergoes hydrolysis even at neutral pH, and the partially hydrolyzed polynuclear complexes can affect the interactions with DNA. These features have made Zn²⁺ a unique cofactor for DNAzyme reactions. This review summarizes Zn²⁺ -dependent DNAzymes with an emphasis on RNA-/DNA-cleaving reactions. A key feature is the sharp Zn²⁺ concentration and pH-dependent activity for many of the DNAzymes. The applications of these DNAzymes as biosensors for Zn²⁺ , as therapeutic agents to cleave intracellular RNA, and as chemical biology tools to manipulate DNA are discussed. Future studies can focus on the selection of new DNAzymes with improved performance and detailed biochemical characterizations to understand the role of Zn²⁺ , which can facilitate practical applications of Zn²⁺ -dependent DNAzymes.

Using Zebrafish to Model Autism Spectrum Disorder: A Comparison of ASD Risk Genes Between Zebrafish and Their Mammalian Counterparts

Autism spectrum disorders (ASDs) are a highly variable and complex set of neurological disorders that alter neurodevelopment and cognitive function, which usually presents with social and learning impairments accompanied with other comorbid symptoms like hypersensitivity or hyposensitivity, or repetitive behaviors. Autism can be caused by genetic and/or environmental factors and unraveling the etiology of ASD has proven challenging, especially given that different genetic mutations can cause both similar and different phenotypes that all fall within the autism spectrum. Furthermore, the list of ASD risk genes is ever increasing making it difficult to synthesize a common theme. The use of rodent models to enhance ASD research is invaluable and is beginning to unravel the underlying molecular mechanisms of this disease. Recently, zebrafish have been recognized as a useful model of neurodevelopmental disorders with regards to genetics, pharmacology and behavior and one of the main foundations supporting autism research (SFARI) recently identified 12 ASD risk genes with validated zebrafish mutant models. Here, we describe what is known about those 12 ASD risk genes in human, mice and zebrafish to better facilitate this research. We also describe several non-genetic models including pharmacological and gnotobiotic models that are used in zebrafish to study ASD.

Characterization of a DNA-hydrolyzing DNAzyme for generation of PCR strands of unequal length

I-R3 DNAzyme is a small, highly active catalytic DNA for DNA hydrolysis. In here, we designed two cis-structure DNAzymes (I-R3N and I-R3S) based on the different locates of the joint linker between I-R3 and its substrate. Data demonstrated that both DNAzymes were highly dependent on Zn²⁺, and worked at a narrow range around pH 7.0. They exhibited strong anti-interference with Mg²⁺ and Ca²⁺, but inhibited by Na⁺ and K⁺. Moreover, single and multiple-site mutations were generated within the catalytic core to carry out a comprehensive mutational study of I-R3 motif, in which most nucleotides were highly conserved and the nucleotides A5, T11 and T8 were identified as the mutational hotspots. Furthermore, an efficient variant A5G was obtained and its reaction condition was optimized. Finally, we constructed A5G to the 3' end of a single-stranded DNA (ssDNA) and applied it for asymmetrical PCR amplification to produce a single and double-stranded DNA mixture, in which A5G within ssDNA can self-cleave to generate a shorter desired ssDNA by denaturing gel separation. This would provide a new non-chemical modification approach for preparation of the expected ssDNA for in vitro selection of DNAzymes.

Smart Bilayer Polyacrylamide/DNA Hybrid Hydrogel Film Actuators Exhibiting Programmable Responsive and Reversible Macroscopic Shape Deformations

As a crucial instinct for the survival of organisms, adaptive smart deformation has been well shown via profusely astounding examples within biological morphogenesis in nature, which inspired the construction of biomimetic shape-morphing materials with controlled actuating behaviors. Herein, the construction of nature-inspired bilayer hydrogel film actuators, composed of a polyacrylamide hydrogel passive layer and a polyacrylamide-DNA hybrid hydrogel active layer, which exhibited programmable stimuli-responsive and reversible macroscopic shape deformations directed by the sequence of DNA crosslinking units in the active layer, is reported. As a proof-of-concept, the introduction of DNA i-motif based crosslinking structures into the active layer, which can undergo pH-stimulated formation and dissociation of crosslinking between polymers and therefore change the crosslinking density of the active layer, lead to the redistribution of the internal stresses within the bilayer structure, and result in the pH-stimulated shape deformations. By programming the sequence of DNA units in the active layer, a Ag⁺ /Cysteamine-stimulated bilayer DNA hybrid hydrogel film actuator is further constructed and exhibits excellent actuation behaviors. Thanks to the micrometer-scale thickness of the films, these actuators exhibit a high degree of macroscopic and reversible shape deformations at high speed, which may find use in future smart biosensing and biomedical applications.

In vitro Selection of Chemically Modified DNAzymes

DNAzymes are in vitro selected DNA oligonucleotides with catalytic activities. RNA cleavage is one of the most extensively studied DNAzyme reactions. To expand the chemical functionality of DNA, various chemical modifications have been made during and after selection. In this review, we summarize examples of RNA-cleaving DNAzymes and focus on those modifications introduced during in vitro selection. By incorporating various modified nucleotides via polymerase chain reaction (PCR) or primer extension, a few DNAzymes were obtained that can be specifically activated by metal ions such as Zn2+ and Hg2+. In addition, some modifications were introduced to mimic RNase A that can cleave RNA substrates in the absence of divalent metal ions. In addition, single modifications at the fixed regions of DNA libraries, especially at the cleavage junctions, have been tested, and examples of DNAzymes with phosphorothioate and histidine-glycine modified tertiary amine were successfully obtained specific for Cu2+, Cd2+, Zn2+, and Ni2+. Labeling fluorophore/quencher pair right next to the cleavage junction was also used to obtain signaling DNAzymes for detecting various metal ions and cells. Furthermore, we reviewed work on the cleavage of 2'-5' linked RNA and L-RNA substrates. Finally, applications of these modified DNAzymes as biosensors, RNases, and biochemical probes are briefly described with a few future research opportunities outlined at the end.

Fundamental studies of functional nucleic acids: aptamers, riboswitches, ribozymes and DNAzymes

This review aims at juxtaposing common versus distinct structural and functional strategies that are applied by aptamers, riboswitches, and ribozymes/DNAzymes. Focusing on recently discovered systems, we begin our analysis with small-molecule binding aptamers, with emphasis on in vitro-selected fluorogenic RNA aptamers and their different modes of ligand binding and fluorescence activation. Fundamental insights are much needed to advance RNA imaging probes for detection of exo- and endogenous RNA and for RNA process tracking. Secondly, we discuss the latest gene expression-regulating mRNA riboswitches that respond to the alarmone ppGpp, to PRPP, to NAD⁺, to adenosine and cytidine diphosphates, and to precursors of thiamine biosynthesis (HMP-PP), and we outline new subclasses of SAM and tetrahydrofolate-binding RNA regulators. Many riboswitches bind protein enzyme cofactors that, in principle, can catalyse a chemical reaction. For RNA, however, only one system (glmS ribozyme) has been identified in Nature thus far that utilizes a small molecule - glucosamine-6-phosphate - to participate directly in reaction catalysis (phosphodiester cleavage). We wonder why that is the case and what is to be done to reveal such likely existing cellular activities that could be more diverse than currently imagined. Thirdly, this brings us to the four latest small nucleolytic ribozymes termed twister, twister-sister, pistol, and hatchet as well as to in vitro selected DNA and RNA enzymes that promote new chemistry, mainly by exploiting their ability for RNA labelling and nucleoside modification recognition. Enormous progress in understanding the strategies of nucleic acids catalysts has been made by providing thorough structural fundaments (e.g. first structure of a DNAzyme, structures of ribozyme transition state mimics) in combination with functional assays and atomic mutagenesis.

CLICK-17, a DNA enzyme that harnesses ultra-low concentrations of either Cu+ or Cu2+ to catalyze the azide-alkyne 'click' reaction in water

To enable the optimal, biocompatible and non-destructive application of the highly useful copper (Cu+)-mediated alkyne-azide 'click' cycloaddition in water, we have isolated and characterized a 79-nucleotide DNA enzyme or DNAzyme, 'CLICK-17', that harnesses as low as sub-micromolar Cu+; or, surprisingly, Cu2+ (without added reductants such as ascorbate) to catalyze conjugation between a variety of alkyne and azide substrates, including small molecules, proteins and nucleic acids. CLICK-17's Cu+ catalysis is orders of magnitude faster than that of either Cu+ alone or of Cu+ complexed to PERMUT-17, a sequence-permuted DNA isomer of CLICK-17. With the less toxic Cu2+, CLICK-17 attains rates comparable to Cu+, under conditions where both Cu2+ alone and Cu2+ complexed with a classic accelerating ligand, THPTA, are wholly inactive. Cyclic voltammetry shows that CLICK-17, unlike PERMUT-17, powerfully perturbs the Cu(II)/Cu(I) redox potential. CLICK-17 thus provides a unique, DNA-derived ligand environment for catalytic copper within its active site. As a bona fide Cu2+-driven enzyme, with potential for being evolved to accept only designated substrates, CLICK-17 and future variants promise the fast, safe, and substrate-specific catalysis of 'click' bioconjugations, potentially on the surfaces of living cells.

Insight into an Oxidative DNA-Cleaving DNAzyme: Multiple Cofactors, the Catalytic Core Map and a Highly Efficient Variant

An oxidative DNA-cleaving DNAzyme (PL) employs a double-cofactor model “X/Cu²⁺” for catalysis. Herein, we verified that reduced nicotinamide adenine dinucleotide (NADH), flavin mononucleotide, cysteine, dithiothreitol, catechol, resorcinol, hydroquinone, phloroglucinol, o-phenylenediamine, 3,3′,5,5'-tetramethylbenzidine, and hydroxylamine acted as cofactor X. According to their structural similarities or fluorescence property, we further confirmed that reduced nicotinamide adenine dinucleotide phosphate (NADPH), 2-mercaptoethanol, dopamine, chlorogenic acid, resveratrol, and 5-carboxyfluorescein also functioned as cofactor X. Superoxide anions might be the commonality behind these cofactors. We subsequently determined the conservative change of individual nucleotides in the catalytic core under four different cofactor X. The nucleotides A4 and C5 are highly conserved, whereas the conservative levels of other nucleotides are dependent on the types of cofactor X. Moreover, we observed that the minor change in the PL's secondary structure affects electrophoretic mobility. Finally, we characterized a highly efficient variant T3G and converted its double-cofactor NADH/Cu²⁺ to sole-cofactor NADH.

•

An oxidative cleavage DNAzyme works with various cofactor X

•

Catalytic nucleotide conservation fluctuates with different cofactor X

•

The PL DNAzyme's minor secondary structure change affects electrophoretic mobility

•

Double-cofactor model of the variant T3G can be converted to sole-cofactor model

The noncovalent dimerization of a G-quadruplex/hemin DNAzyme improves its biocatalytic properties

While many protein enzymes exert their functions through multimerization, which improves both selectivity and activity, this has not yet been demonstrated for other naturally occurring catalysts. Here, we report a multimerization effect applied to catalytic DNAs (or DNAzymes) and demonstrate that the enzymatic efficiency of G-quadruplexes (GQs) in interaction with the hemin cofactor is remarkably enhanced by homodimerization. The resulting non-covalent dimeric GQ-DNAzyme system provides hemin with a structurally defined active site in which both the cofactor (hemin) and the oxidant (H2O2) are activated. This new biocatalytic system efficiently performs peroxidase- and peroxygenase-type biotransformations of a broad range of substrates, thus providing new perspectives for biotechnological application of GQs.

New Deoxyribozymes for the Native Ligation of RNA

Deoxyribozymes (DNAzymes) are small, synthetic, single-stranded DNAs capable of catalyzing chemical reactions, including RNA ligation. Herein, we report a novel class of RNA ligase deoxyribozymes that utilize 5'-adenylated RNA (5'-AppRNA) as the donor substrate, mimicking the activated intermediates of protein-catalyzed RNA ligation. Four new DNAzymes were identified by in vitro selection from an N₄₀ random DNA library and were shown to catalyze the intermolecular linear RNA-RNA ligation via the formation of a native 3'-5'-phosphodiester linkage. The catalytic activity is distinct from previously described RNA-ligating deoxyribozymes. Kinetic analyses revealed the optimal incubation conditions for high ligation yields and demonstrated a broad RNA substrate scope. Together with the smooth synthetic accessibility of 5'-adenylated RNAs, the new DNA enzymes are promising tools for the protein-free synthesis of long RNAs, for example containing precious modified nucleotides or fluorescent labels for biochemical and biophysical investigations.

Bismuth as Smart Material and Its Application in the Ninth Principle of Sustainable Chemistry

This paper reports an overview of Green Chemistry and the concept of its twelve principles. This study focusses on the ninth principle of Green Chemistry, that is, catalysis. A report on catalysis, in line with its definition, background, classification, properties, and applications, is provided. The study also entails a green element called bismuth. Bismuth’s low toxicity and low cost have made researchers focus on its wide applications in catalysis. It exhibits smartness in all the catalytic activities with the highest catalytic performance among other metals.

Mimicking Functions of Native Enzymes or Photosynthetic Reaction Centers by Nucleoapzymes and Photonucleoapzymes

The covalent linkage of catalytic units to aptamer sequence-specific nucleic acids exhibiting selective binding affinities for substrates leads to functional scaffolds mimicking native enzymes, nucleoapzymes. The binding of the substrates to the aptamer and their structural orientation with respect to the catalytic units duplicate the functions of the active center of enzymes. The possibility of linking the catalytic sites directly, or through spacer units, to the 5′-end, 3′-end, and middle positions of the aptamers allows the design of nucleoapzyme libraries, revealing structure–functions diversities, and these can be modeled by molecular dynamics simulations. Catalytic sites integrated into nucleoapzymes include DNAzymes, transition metal complexes, and organic ligands. Catalytic transformations driven by nucleoapzymes are exemplified by the oxidation of dopamine or l-arginine, hydroxylation of tyrosine to l-DOPA, hydrolysis of ATP, and cholic acid-modified esters. The covalent linkage of photosensitizers to the tyrosinamide aptamer leads to a photonucleoapzyme scaffold that binds the N-methyl-N′-(3-aminopropane)-4,4′-bipyridinium-functionalized tyrosinamide to the aptamer. By linking the photosensitizer directly, or through a spacer bridge to the 5′-end or 3′-end of the aptamer, we demonstrate a library of supramolecular photosensitizer/electron acceptor photonucleoapzymes mimicking the functions of photosystem I in the photosynthetic apparatus. The photonucleoapzymes catalyze the photoinduced generation of NADPH, in the presence of ferredoxin-NADP⁺-reductase (FNR), or the photoinduced H₂ evolution catalyzed by Pt nanoparticles. The future prospects of nucleoapzymes and photonucleoapzymes are discussed.

Multifunctional DNA Polymer-Assisted Upconversion Therapeutic Nanoplatform for Enhanced Photodynamic Therapy

Although considerable clinical attempts on various kinds of cancers have been made, photodynamic therapy (PDT) still suffers from attenuated therapeutic effects because of the developed resistance of cancer cells. As a novel antiapoptosis protein, survivin has been demonstrated to be selectively overexpressed in a great number of human malignancies and plays a significant part in cancer progression and therapeutic resistance. Herein, we present an upconversion nanoplatform for enhanced PDT by DNAzyme-mediated gene silencing of survivin. In our system, a long single-stranded DNA (ssDNA) with a repetitive aptamer (AS1411) and survivin-targeted DNAzyme was fabricated by rolling circle amplification (RCA) and adsorbed on the upconversion nanoparticles (UCNPs) by electrostatic attraction. The multivalence of the ssDNA endows the upconversion nanoplatform with high recognition and loading capacity of photosensitizers and DNAzymes. When the nanoplatform is targeted internalized into cancer cells, PDT can be triggered by near-infrared (NIR) light to generate reactive oxygen species (ROS) for killing the cancer cells. Moreover, the encoded DNAzyme can efficiently inhibit the gene expression of survivin, providing the potential to enhance the efficiency of PDT. This study thus highlights the promise of an upconversion photodynamic nanoplatform for admirable combination therapy in cancer.

A smart deoxyribozyme-based fluorescent sensor for in vitro detection of androgen receptor mRNA

Nowadays a variety of biosensors are widely used in different fields, including biomedical diagnostics and self-testing. Nucleic acid-based biosensors are typically applied to detect another nucleic acid, proteins, ions, and several other types of compounds. It is most promising to develop simple and effective biosensors for the use in situations where traditional methods are not available due to their complexity and laboriousness. In this project, a novel smart deoxyribozyme-based fluorescent sensor for the detection of androgen receptor mRNA was developed. It consists of several functional modules including two deoxyribozymes 10-23, an RNA-dependent split malachite green aptamer, and an oligonucleotide platform. Deoxyribozymes specifically release a 27-nucleotide RNA fragment that is readily available for the interaction with the aptamer module. This solves a problem of secondary structure in hybridization with the target sequence of full-length mRNA. It was shown that within 24 hours the proposed sensor specifically recognized both a synthetic 60-nucleotide RNA fragment (LOD is 1.4 nM of RNA fragment at 37 °C) and a full-sized mRNA molecule of the androgen receptor. The constructed sensor is easy to use, has high efficiency and selectivity for the RNA target, and can be reconstructed for the detection of various nucleic acid sequences due to its modular structure. Thus, similar biosensors may be useful for the differential diagnosis.

Allosteric Regulation of DNAzyme Activities through Intrastrand Transformation Induced by Cu(II)-Mediated Artificial Base Pairing

Allosteric regulation is gaining increasing attention as a basis for the production of stimuli-responsive materials in many research areas including DNA nanotechnology. We expected that metal-mediated artificial base pairs, consisting of ligand-type nucleotides and a bridging metal ion, could serve as allosteric units that regulate the function of DNA molecules. In this study, we established a rational design strategy for developing Cu^II-responsive allosteric DNAzymes by incorporating artificial hydroxypyridone ligand-type nucleotides (H) that form a Cu^II-mediated base pair (H-Cu^II-H). We devised a new enzymatic method using a standard DNA polymerase and a ligase to prepare DNA strands containing H nucleotides. Previously reported DNAzymes were modified by introducing a H-H pair into the stem region, and the stem-loop sequences were altered so that the structure becomes catalytically inactive in the absence of Cu^II ions. The formation of a H-Cu^II-H base pair triggers intrastrand transformation from the inactive to the active structure, enabling allosteric regulation of the DNAzyme activity in response to Cu^II ions. The activity of the H-modified DNAzyme was reversibly switched by the addition and removal of Cu^II ions under isothermal conditions. Similarly, by incorporating a H-Cu^II-H pair into an in vitro-selected Ag^I-dependent DNAzyme, we have developed a DNAzyme that exhibits an AND logic-gate response to Cu^II and Ag^I ions. The rational design strategy and the easy enzymatic synthetic method presented here provide a versatile way to develop a variety of metal-responsive allosteric DNA materials, including molecular machines and logic circuits, based on metal-mediated artificial base pairing.

Selection of a metal ligand modified DNAzyme for detecting Ni2

Nickel is a highly important metal, and the detection of Ni²⁺ using biosensors is a long-stand analytical challenge. DNA has been widely used for metal detection, although no DNA-based sensors were reported for Ni²⁺. DNAzymes are DNA-based catalysts, and they recruit metal ions for catalysis. In this work, in vitro selection of RNA-cleaving DNAzymes was carried out using a library containing a region of 50 random nucleotides in the presence of Ni²⁺. To increase Ni²⁺ binding, a glycyl-histidine-functionalized tertiary amine moiety was inserted at the cleavage junction. A representative DNAzyme named Ni03 showed a high cleavage yield with Ni²⁺ and it was further studied. After truncation, the optimal sequence of Ni03l could bind one Ni²⁺ or two Co²⁺ for catalysis, while other metal ions were inactive. Its cleavage rates for 100 μM Ni²⁺ reached 0.63 h^-1 at pH 8.0. A catalytic beacon biosensor was designed by labeling a fluorophore and a quencher on the Ni03l DNAzyme. Fluorescence enhancement was observed in the presence of Ni²⁺ with a detection limit of 12.9 μM. The sensor was also tested in spiked Lake Ontario water achieving a similar sensitivity. This is another example of using single-site modified DNAzyme for sensing transition metal ions.

Splitting aptamers and nucleic acid enzymes for the development of advanced biosensors

In analogy to split-protein systems, which rely on the appropriate fragmentation of protein domains, split aptamers made of two or more short nucleic acid strands have emerged as novel tools in biosensor set-ups. The concept relies on dissecting an aptamer into a series of two or more independent fragments, able to assemble in the presence of a specific target. The stability of the assembled structure can further be enhanced by functionalities that upon folding would lead to covalent end-joining of the fragments. To date, only a few aptamers have been split successfully, and application of split aptamers in biosensing approaches remains as promising as it is challenging. Further improving the stability of split aptamer target complexes and with that the sensitivity as well as efficient working modes are important tasks. Here we review functional nucleic acid assemblies that are derived from aptamers and ribozymes/DNAzymes. We focus on the thrombin, the adenosine/ATP and the cocaine split aptamers as the three most studied DNA split systems and on split DNAzyme assemblies. Furthermore, we extend the subject into split light up RNA aptamers used as mimics of the green fluorescent protein (GFP), and split ribozymes.

Bifunctional RNA-Targeting Deoxyribozyme Nanodevice as a Potential Theranostic Agent

Theranostic approaches rely on simultaneous diagnostic of a disease and its therapy. Here, we designed a DNA nanodevice, which can simultaneously report the presence of a specific RNA target through an increase in fluorescence and cleave it. High selectivity of RNA target recognition under near physiological conditions was achieved. The proposed approach can become a basis for the design of DNA nanomachines and robots for diagnostics and therapy of viral infections, cancer, and genetic disorders.

A simple and affordable kinetic assay of nucleic acids with SYBR Gold gel staining

Labeling substrates or products are paramount in determining enzymatic kinetic parameters. Several options are available; many laboratories use either radioactive or fluorescent labeling because of their high sensitivity. However, those methods have their own drawbacks such as half-life decay, expensive and hazardous. Here, we propose a novel, simple, economical and fast alternative to substrate labeling for studying the kinetics of nucleic acids: post-migration gel staining with SYBR Gold. Cleavage rates similar to the ones reported in the literature for the I-R3 DNA-cleaving DNA enzyme in the presence of zinc chloride are an indication of the quality of the new method. Moreover, the activity of the hammerhead ribozyme was also monitored by our method to illustrate its versatility. This labeling-free method has several advantages such as its ease of use as well as cost effective and versatility with both non-structured and structured RNAs or DNAs.

2'-Functional group of adenosine in 10-23 DNAzyme promotes catalytic activity

10-23 DNAzyme is an artificially selected catalytic DNA molecule. Its great potential as genetic therapeutics promoted chemical modifications for more efficient DNAzymes. Here, 10-23 DNAzyme was modified on its six deoxyadenosine residues (A5, A9, A11, A12, A15 in the catalytic domain and A0 of the recognition arm next to the cleavage site) with compound 1, an adenosine analogue with 2'-O-[N-(aminoethyl)carbamoyl]methyl group. A positive effect of compound 1 at A15 was observed (HJDS-05, k_obs = 0.0111 min^-1). Compared to the effect of 2'-H and 2'-OMe at A15, this result provided an approach for more efficient DNAzyme by combining 2'-substituted amino group of adenosine with A15 as the lead structure.

Aptamer-Functionalized DNA Nanostructures for Biological Applications

DNA nanostructures hold great promise for various applications due to their remarkable properties, including programmable assembly, nanometric positional precision, and dynamic structural control. The past few decades have seen the development of various kinds of DNA nanostructures that can be employed as useful tools in fields such as chemistry, materials, biology, and medicine. Aptamers are short single-stranded nucleic acids that bind to specific targets with excellent selectivity and high affinity and play critical roles in molecular recognition. Recently, many attempts have been made to integrate aptamers with DNA nanostructures for a range of biological applications. This review starts with an introduction to the features of aptamer-functionalized DNA nanostructures. The discussion then focuses on recent progress (particularly during the last five years) in the applications of these nanostructures in areas such as biosensing, bioimaging, cancer therapy, and biophysics. Finally, challenges involved in the practical application of aptamer-functionalized DNA nanostructures are discussed, and perspectives on future directions for research into and applications of aptamer-functionalized DNA nanostructures are provided.

DMLR: A toolkit for investigation of deoxyribozyme-mediated ligation based on real time PCR

Deoxyribozymes or DNAzyme are identified as catalytic DNA sequences which catalyze different chemical reactions. Ligating deoxyribozymes catalyze the formation of branched and linear products. Due to the lack of efficient read-out systems, there is no report on in vivo application of ligating deoxyribozymes. To expand the biological application of branched-RNA forming deoxyribozymes, we performed our study in order to suggest a practical toolkit for measurement of in vivo real-time activity of ligating deoxyribozymes. Further in vitro studies were designed to analyze the effects of the location of branch site on reverse transcriptase (RT) interference. With this toolkit even the activity of RT was measured precisely. Our results indicate that the activity of RT enzyme significantly affected by a 17 nt branched adaptor synthesized by 10DM24 ligating deoxyribozyme. The RT stalls at or near the RNA branch point during both initiation and elongation phases. The DNA synthesis is decreased 4.3 and 2.7 fold during initiation and elongation phases respectively. In conclusion, we introduce a general and practical toolkit called "DMLR" which is based on Real-time PCR method. The use of DMLR precisely determines RT behavior when encountered with any backbone modification with the ability of stopping the enzyme activity.

Catalytic Nucleic Acids: Biochemistry, Chemical Biology, Biosensors, and Nanotechnology

Since the initial discovery of ribozymes in the early 1980s, catalytic nucleic acids have been used in different areas. Compared with protein enzymes, catalytic nucleic acids are programmable in structure, easy to modify, and more stable especially for DNA. We take a historic view to summarize a few main interdisciplinary areas of research on nucleic acid enzymes that may have broader impacts. Early efforts on ribozymes in the 1980s have broken the notion that all enzymes are proteins, supplying new evidence for the RNA world hypothesis. In 1994, the first catalytic DNA (DNAzyme) was reported. Since 2000, the biosensor applications of DNAzymes have emerged and DNAzymes are particularly useful for detecting metal ions, a challenging task for enzymes and antibodies. Combined with nanotechnology, DNAzymes are key building elements for switches allowing dynamic control of materials assembly. The search for new DNAzymes and ribozymes is facilitated by developments in DNA sequencing and computational algorithms, further broadening our fundamental understanding of their biochemistry.

Nucleic acid-cleaving catalytic DNA for sensing and therapeutics

DNAzymes with nucleic acid-cleaving catalytic activity are increasing in versatility through concerted efforts to discover new sequences with unique functions, and they are generating excitement in the sensing community as cheap, stable, amplifiable detection elements. This review provides a comprehensive list and detailed descriptions of the DNAzymes identified to date, classified by their associated small molecule or ion needed for catalysis; of note, this classification clarifies conserved regions of various DNAzymes that are not obvious in the literature. Furthermore, we detail the breadth of functionality of these DNA sequences as well as the range of reaction conditions under which they are useful. In addition, the utility of the DNAzymes in a variety of sensing and therapeutic applications is presented, detailing both their advantages and disadvantages.

Advances in functional nucleic acid based paper sensors

This article provides an extensive review of paper-based sensors that utilize functional nucleic acids, particularly DNA aptamers and DNAzymes, as recognition elements.

Sensitivity of a classic DNAzyme for Pb2+ modulated by cations, anions and buffers

Both cations and anions in salt strongly affect the activity of a classic Pb²⁺ specific DNAzyme, which in turn can affect the sensitivity of related biosensors.

Site-specific functionalization with amino, guanidinium, and imidazolyl groups enabling the activation of 10–23 DNAzyme

10–23 DNAzyme has been extensively explored as a therapeutic and biotechnological tool, as well as in DNA computing. Faster cleavage or transformation is always needed. The present research displays a rational modification approach for a more efficient DNAzyme. In the catalytic core, amino, guanidinium and imidazolyl groups were introduced for its chemical activation through the adenine base. Among the six adenine residues, A9 is the unique residue that realizes all the positive effects; the 6-amino and 8-position of adenine and the 7-position of 8-aza-7-deaza-adenine could be used for the introduction of the functional groups. A12 is a new choice for catalytic improvement with an 8-substituent. Therefore, more active DNAzymes could be expected by this nucleobase-modified activation approach.

Chemical activation of 10–23 DNAzyme was realized at A9 modified with active functional groups amino, guanidinium, and imidazolyl groups.

Insights into DNA catalysis from structural and functional studies of the 8-17 DNAzyme

The review examines functional knowledge gathered over two decades of research on the 8-17 DNAzyme, focusing on three aspects: the structural requirements for catalysis, the role of metal ions and the participation of general acid-base catalysis.

DNAzymes as Activity-Based Sensors for Metal Ions: Recent Applications, Demonstrated Advantages, Current Challenges, and Future Directions

Metal ions can be beneficial or toxic depending on their identity, oxidation state, and concentration. Therefore, the ability to detect and quantify different types of metal ions using portable sensors or in situ imaging agents is important for better environmental monitoring, in vitro medical diagnostics, and imaging of biological systems. While numerous metal ions in different oxidation states are present in the environment and biological systems, only a limited number of them can be detected effectively using current methods. In this Account, we summarize research results from our group that overcome this limitation by the development of a novel class of activity-based sensors based on metal-dependent DNAzymes, which are DNA molecules with enzymatic activity. First, we have developed an in vitro selection method to obtain DNAzymes from a large DNA library of up to 1015 sequences that can carry out cleavage of an oligonucleotide substrate only in the presence of a specific metal ion with high selectivity. Negative selection steps can further be used to improve the selectivity against potentially competing targets by removing sequences that recognize the competing metal ions. Second, we have developed a patented catalytic beacon method to transform the metal-dependent DNAzyme cleavage reaction into a turn-on fluorescent signal by attaching a fluorophore and quenchers to the DNAzyme complex. Because of the difference in the melting temperatures of DNA hybridization before and after metal-ion-dependent cleavage of the DNAzyme substrate, the fluorophore on the DNA cleavage product can be released from its quenchers to create a turn-on fluorescent signal. Because DNAzymes are easy to conjugate with other signaling moieties, such as gold nanoparticles, lanthanide-doped upconversion nanoparticles, electrochemical agents, and gadolinium complexes, these DNAzymes can also readily be converted into colorimetric sensors, upconversion luminescence sensors, electrochemical sensors, or magnetic resonance contrast agents. In addition to describing recent progress in developing and applying these metal ion sensors for environmental monitoring, point-of-care diagnostics, cellular imaging, and in vivo imaging in zebrafish, we summarize major advantages of this class of activity-based sensors. In addition to advantages common to most activity-based sensors, such as enzymatic turnovers that allow for signal amplification and the use of initial rates instead of absolute signals for quantification to avoid interferences from sample matrices, the DNAzyme-based sensors allow for in vitro selection to expand the method to almost any metal ion under a variety of conditions, negative selection to improve the selectivity against competing targets, and reselection of DNAzymes and combination of active and inactive variants to fine-tune the dynamic range of detection. The use of melting temperature differences to separate target binding from signaling moieties in the catalytic beacon method allows the use of different fluorophores and nanomaterials to extend the versatility and modularity of this sensing platform. Furthermore, sensing and imaging artifacts can be minimized by using an inactive mutant DNAzyme as a negative control, while spatiotemporal control of sensing/imaging can be achieved using optical, photothermal, and endogenous orthogonal caging methods. Finally, current challenges, opportunities, and future perspectives for DNAzymes as activity-based sensors are also discussed.

The Two Classic Pb2+ -Selective DNAzymes Are Related: Rational Evolution for Understanding Metal Selectivity

In 1994, the first DNAzyme named GR5 was reported, which specifically requires Pb²⁺ for its RNA cleavage activity. Three years later, the 8-17 DNAzyme was isolated. The 8-17 DNAzyme and the related 17E DNAzyme are also most active with Pb²⁺ , although other divalent metals can work as well. GR5 and 17E have the same substrate sequence, and their catalytic loops in the enzyme strands also have a few similar and conserved nucleotides. Considering these, we hypothesized that 17E might be a special form of GR5. To test this hypothesis, we performed systematic rational evolution experiments to gradually mutate GR5 toward 17E. By using the activity ratio in the presence of Pb²⁺ and Mg²⁺ for defining these two DNAzymes, the critical nucleotide was identified to be T₁₂ in 17E for metal specificity. In addition, G₉ in GR5 is a position not found in most 17E or 8-17 DNAzymes, and G₉ needs to be added to rescue GR5 activity if T₁₂ becomes a cytosine. This study highlights the links between these two classic and widely used DNAzymes, and offers new insight into the sequence-activity relationship related to metal selectivity.

Evaluating the Catalytic Potential of a General RNA-Cleaving FANA Enzyme

The discovery of synthetic genetic polymers (XNAs) with catalytic activity demonstrates that natural genetic polymers are not unique in their ability to function as enzymes. However, all known examples of in vitro selected XNA enzymes function with lower activity than their natural counterparts, suggesting that XNAs might be limited in their ability to fold into structures with high catalytic activity. To explore this problem, we evaluated the catalytic potential of FANAzyme 12-7, an RNA-cleaving catalyst composed entirely of 2'-fluoroarabino nucleic acid (FANA) that was evolved to cleave RNA at a specific phosphodiester bond located between an unpaired guanine and a paired uracil in the substrate recognition arm. Here, we show that this activity extends to chimeric DNA substrates that contain a central riboguanosine (riboG) residue at the cleavage site. Surprisingly, FANAzyme 12-7 rivals known DNAzymes that were previously evolved to cleave chimeric DNA substrates under physiological conditions. These data provide convincing evidence that FANAzyme 12-7 maintains the catalytic potential of equivalent DNAzymes, which has important implications for the evolution of XNA catalysts and their contributions to future applications in synthetic biology.

Highly Sensitive RNA-Cleaving DNAzyme Sensors from Surface-to-Surface Product Enrichment

The engineering of easy-to-use biosensors with ultra-low detection sensitivity remains a major challenge. Herein, we report a simple approach for creating such sensors through the use of an RNA-cleaving DNAzyme (RcD) and a strategy designed to concentrate its cleavage product significantly. The assay uses micron-sized beads loaded with a target-responsive RcD and a paper strip containing a microzone covered with a DNA oligonucleotide capable of capturing the cleavage product of the RcD through Watson-Crick hybridization. Placing the beads and the paper strip in a target-containing test sample allows the bead-bound RcD molecules to undergo target-induced RNA cleavage, releasing a DNA fragment that is captured by the paper strip. This strategy, though simple, is very effective in achieving high levels of detection sensitivity, being able to enrich the concentration of the cleavage product by three orders of magnitude. It is also compatible with both fluorescence-based and colorimetric reporting mechanisms. This work provides a simple platform for developing ultrasensitive biosensors that take advantage of the widely available RcDs as molecular recognition elements.

Enzymatic Synthesis of Cu(II)-Responsive Deoxyribozymes through Polymerase Incorporation of Artificial Ligand-Type Nucleotides

Metal-mediated artificial base pairs, consisting of ligand-type nucleotides and a bridging metal ion, have shown promise as functional units to develop stimuli-responsive DNA materials. Although a variety of metal-mediated base pairs have been constructed with artificial ligand-type nucleotides and various metal ions, the application of such metal-mediated base pairs has been relatively poorly explored mainly due to the cumbersome chemical synthesis of artificial DNA strands. Herein we report a facile enzymatic method to synthesize DNA strands containing a ligand-type hydroxypyridone (H) nucleotide, which forms a Cu^II-mediated base pair (H-Cu^II-H). A two-step primer extension reaction using two commercially available polymerases enabled the incorporation of a H nucleotide at an internal position of oligonucleotides. The polymerase synthesis was subsequently applied to the development of metal-responsive deoxyribozymes (DNAzymes), whose catalytic activity was regulated by the formation of a single H-Cu^II-H base pair in its stem region. The DNAzyme activity was reversibly switched by the alternate addition and the removal of Cu^II ions. Furthermore, metal-dependent orthogonal activation of a Cu^II-responsive H-DNAzyme and a Hg^II-responsive T-DNAzyme was experimentally demonstrated by utilizing both H-Cu^II-H as well as widely explored T-Hg^II-T base pairs. These results suggest that the incorporation of H-Cu^II-H base pairs would facilitate the rational design of metal-responsive functional DNAs. Accordingly, the facile enzymatic synthesis of artificial ligand-bearing DNAs developed in this study would significantly expand the toolbox of DNA-based supramolecular chemistry and DNA nanotechnology.

A DNAzyme based knockdown model for Fragile-X syndrome in zebrafish reveals a critical window for therapeutic intervention

INTRODUCTION

FXS is the leading cause of intellectual disabilities in males and a major monogenic cause of ASD (Autism spectrum disorders). It occurs due to the loss of FMRP, whose role in early development is not well understood. In this study, we have used a novel DNAzyme based approach to create a larval model of FXS in zebrafish with specific focus on the early developmental window.

METHODS

Fmr1specific DNAzymes were electroporated into embryos to create the knockdown. Changes in RNA and protein levels of FMRP and relevant biomarkers were measured in the 0-7dpf window. Behavioral tests to measure anxiety, cognitive impairments and irritability in the larvae were conducted at the 7dpf stage. Drug treatment was carried out at various time points in the 0-7dpf window to identify the critical window for pharmacological intervention.

RESULTS

The DNAzyme based knockdown approach led to a significant knockdown of FMRP in the zebrafish embryos, accompanied by increased anxiety, irritability and cognitive impairments at 7dpf, thus creating a robust larval model of FXS. Treatment with the Mavoglurant was able to rescue the behavioral phenotypes in the FXS larvae, and found to be more efficacious in the 0-3dpf window.

DISCUSSION

The results from this study have revealed that a) a DNAzyme based knockdown approach can be used to create robust larval zebrafish model of disease, in a high-throughput manner and b) optimal window for therapeutic intervention for FXS as well as other pediatric diseases with a monogenic cause can be identified using such a model.