An ion funnel interface for improved ion focusing and sensitivity using electrospray ionization mass spectrometry

Differentiation of compact and extended conformations of di-ubiquitin conjugates with lysine-specific isopeptide linkages by ion mobility-mass spectrometry

Modification of ubiquitin, a key cellular regulatory polypeptide of 76 amino acids, to polyubiquitin conjugates by lysine-specific isopeptide linkage at one of its seven lysine residues has been recognized as a central pathway determining its biochemical properties and cellular functions. Structural details and differences of distinct lysine-isopeptidyl ubiquitin conjugates that reflect their different functions and reactivities, however, are only partially understood. Ion mobility spectrometry (IMS) combined with mass spectrometry (MS) has recently emerged as a powerful tool for probing conformations and topology involved in protein interactions by an electric field-driven separation of polypeptide ions through a drift gas. Here we report the conformational characterization and differentiation of Lys63- and Lys48-linked ubiquitin conjugates by IMS-MS. Lys63- and Lys48-linked di-ubiquitin conjugates were prepared by recombinant bacterial expression and by chemical synthesis using a specific chemical ligation strategy, and characterized by high-resolution Fourier transform ion cyclotron resonance mass spectrometry, circular dichroism spectroscopy, and molecular modeling. IMS-MS was found to be an effective tool for the identification of structural differences of ubiquitin complexes in the gas phase. The comparison of collision cross-sections of Lys63- and Lys48-linked di-ubiquitin conjugates showed a more elongated conformation of Lys63-linked di-ubiquitin. In contrast, the Lys48-linked di-ubiquitin conjugate showed a more compact conformation. The IMS-MS results are consistent with published structural data and a comparative molecular modeling study of the Lys63- and Lys48-linked conjugates. The results presented here suggest IMS techniques can provide information that complements MS measurements in differentiating higher-order polyubiquitins and other isomeric protein linkages.

Overtone mobility spectrometry: part 3. On the origin of peaks

The origin of non-integer overtone peaks in overtone mobility spectrometry (OMS) spectra is investigated by ion trajectory simulations. Simulations indicate that these OMS features arise from higher-order overtone series. An empirically-derived formula is presented as a means of describing the positions of peaks. The new equation makes it possible to determine collision cross sections from any OMS peak. Additionally, it is extended as a means of predicting the resolving power for any peak in an OMS distribution.

Complexation of amino compounds by 18C6 improves selectivity by IMS-IMS-MS: application to petroleum characterization

Complexation of a series of related amino compounds by 18-crown-6 ether (18C6) is studied as a means of improving the resolution of mixtures by combinations of ion mobility spectrometry (IMS) and mass spectrometry (MS) techniques. Mixtures of the isomeric amines n-octylamine (NOA), dibutylamine (DBA), and diisopropylethylamine (DIPEA) were electrosprayed to produce gaseous [M + H](+) ions. These species have overlapping mobilities and are not resolved by IMS. Addition of 18C6 yields [M + 18C6 + H](+) ion complexes that are resolved by IMS. In subsequent experiments, [M + 18C6 + H](+) ion complexes are separated according to their mobilities and specific species are selected and exposed to collisional activation. This analysis yields dissociation voltages that are inversely correlated with the number of separate substitutions on the nitrogen atom of the amino compounds; dissociation voltages of ~40, ~90, and ~150 V are obtained for the tri-, di-, and mono-substituted amino compounds DIPEA, DBA, and NOA, respectively. For these complexes, an inverse correlation is also observed with respect to the gas-phase basicities (GB) of the amino compounds (964, 935, and 895 kJ mol(-1), respectively). Studies of 18C6 complexes with a series of n-alkylamines (C( n )H(2n+3)N where n=3 to 18, respectively) show that dissociation voltages increase systematically (from ~140 to ~190 V) under the conditions employed. The sensitivity to collision energy provides an additional means of distinguishing between classes of compounds. The approach is extended as a means of separating nitrogen-containing compounds from petroleum.

A scanning frequency mode for ion cyclotron mobility spectrometry

A new operational mode for an ion cyclotron mobility spectrometry instrument is explored as a possible means of performing high-resolution separations. The approach is based on oscillating fields that are applied to segmented regions of a circular drift tube. Ions with mobilities that are resonant with the frequency of field application are transmitted while nonresonant species are eliminated. An ion mobility spectrum is obtained by scanning the drift field application frequency. The approach is demonstrated by examining mixtures of ions produced by electrospraying the substance P peptide, as well as a mixture of tryptic peptides obtained by enzymatic digestion of cytochrome c. Drift field application frequency scans of substance P peptide ions show that it is possible to separate [M+2H](2+) ions, and compact and elongated forms of [M+3H](3+) ions. The resolution of different ions is related to the number of cycles for the analysis. At high cycle numbers (>50 3/4 or a drift length of 9242.03 cm) values of the resolving power can exceed 300 with a maximum resolving power of ∼400. The ability to tune the resolving power of a mobility-based separation by varying the ion cycle number has substantial analytical utility.

Precursor acquisition independent from ion count: how to dive deeper into the proteomics ocean

Data-dependent precursor ion selection is widely used in shotgun proteomics to profile the protein components of complex samples. Although very popular, this bottom-up method presents major drawbacks in terms of detectable dynamic range. Here, we demonstrate the superior performance of a data-independent method we term precursor acquisition independent from ion count (PAcIFIC). Our results show that almost the entire, predicted, soluble bacterial proteome can be thoroughly analyzed by PAcIFIC without the need for any sample fractionation other than the C18-based liquid chromatograph used to introduce the peptide mixture into the mass spectrometer. Importantly, we also show that PAcIFIC provides unique performance for analysis of human plasma in terms of the number of proteins identified (746 at FDR < or = 0.5%) and achieved dynamic range (8 orders of magnitude at FDR < or = 0.5%), without any fractionation other than immuno-depletion of the seven most abundant proteins.

Evidence for a quasi-equilibrium distribution of states for bradykinin [M + 3H]3+ ions in the gas phase

Multidimensional ion mobility spectrometry coupled with mass spectrometry (IMS-IMS-MS) techniques are used to select and activate six different gas-phase conformations of bradykinin [M + 3H](3+) ions. Drift time distributions as a function of activation voltage show that at low voltages selected structures undergo conformational transitions in what appears to be a pathway dependent fashion. Over a relatively wide range of intermediate activation voltages a distribution of states that is independent of the initial conformation selected for activation (as well as the activation voltage in this intermediate region) is established. This distribution appears to represent an equilibrium distribution of gas-phase structures that is reached prior to the energy required for dissociation. Establishment of a quasi-equilibrium prior to dissociation results in identical dissociation patterns for different selected conformations. A discussion of the transition from solution-like to gas-phase structures is provided.

A top-down LC-FTICR MS-based strategy for characterizing oxidized calmodulin in activated macrophages

A liquid chromatography-mass spectrometry (LC-MS)-based approach for characterizing the degree of nitration and oxidation of intact calmodulin (CaM) has been used to resolve approximately 250 CaM oxiforms using only 500 ng of protein. The analysis was based on high-resolution data of the intact CaM isoforms obtained by Fourier-transform ion cyclotron resonance mass spectrometry (FTICR MS) coupled with an on-line reversed-phase LC separation. Tentative identifications of post-translational modifications (PTMs), such as oxidation or nitration, have been assigned by matching observed protein mass to a database containing all theoretically predicted oxidation products of CaM and verified through a combination of tryptic peptide information (generated from bottom-up analyses) and on-line collisionally induced dissociation (CID) tandem mass spectrometry (MS/MS) at the intact protein level. The reduction in abundance and diversity of oxidatively modified CaM (i.e., nitrated tyrosines and oxidized methionines) induced by macrophage activation has been explored and semiquantified for different oxidation degrees (i.e., no oxidation, moderate, and high oxidation). This work demonstrates the power of the top-down approach to identify and quantify hundreds of combinations of PTMs for single protein target such as CaM and implicate competing repair and peptidase activities to modulate cellular metabolism in response to oxidative stress.

Structural characterization of intact proteins is enhanced by prevalent fragmentation pathways rarely observed for peptides

While collisionally activated dissociation (CAD) pathways for peptides are well characterized, those of intact proteins are not. We systematically assigned CAD product ions of ubiquitin, myoglobin, and bovine serum albumin generated using high-yield, in-source fragmentation. Assignment of >98% of hundreds of product ions implies that the fragmentation pathways described are representative of the major pathways. Protein dissociation mechanisms were found to be modulated by both source declustering potential and precursor ion charge state. Like peptides, higher charge states of proteins fragmented at lower energies next to Pro, via mobile protons, while lower charge states fragmented at higher energies after Asp and Glu, via localized protons. Unlike peptides, however, predominant fragmentation channels of proteins occurred at intermediate charge states via non-canonical mechanisms and produced extensive internal fragmentation. The non-canonical mechanisms include prominent cleavages C-terminal to Pro and Asn, and N-terminal to Ile, Leu, and Ser; these cleavages, along with internal fragments, led to a 45% increase in sequence coverage, improving the specificity of top-down protein identification. Three applications take advantage of the different mechanisms of protein fragmentation. First, modulation of declustering potential selectively fragments different charge states, allowing the source region to be used as the first stage of a low-resolution tandem mass spectrometer, facilitating pseudo-MS(3) of product ions with known parent charge states. Second, development and integration of automated modulation of ion funnel declustering potential allows users access to a particular fragmentation mechanism, yielding facile cleavage on a liquid chromatography timescale. Third, augmentation of a top-down search engine improved protein characterization.

The ion funnel: theory, implementations, and applications

The electrodynamic ion funnel has enabled the manipulation and focusing of ions in a pressure regime (0.1-30 Torr) that has challenged traditional approaches, and provided the basis for much greater mass spectrometer ion transmission efficiencies. The initial ion funnel implementations aimed to efficiently capture ions in the expanding gas jet of an electrospray ionization interface and radially focus them for efficient transfer through a conductance limiting orifice. We review the improvements in fundamental understanding of ion motion in ion funnels, the evolution in its implementations that have brought the ion funnel to its current state of refinement, as well as applications of the ion funnel for purposes such as ion trapping, ion cooling, low pressure electrospray, and ion mobility spectrometry.

Ion trajectory simulations in a high-pressure cylindrical ion trap

We present the simulation of a cylindrical ion trap (CIT) at high pressure (5-25 Torr range). SIMION 7.0 software was used for the simulations. The effect of pressure, RF frequency and trap dimensions has been investigated. The shape of stability diagrams at non-zero pressure is drastically different from the one observed in vacuum. Preliminary experimental results are shown, using a r = z = 3 mm-long CIT at 12 Torr for trapping peptide and protein ions.

Atmospheric pressure ion sources

This review of atmospheric pressure ion sources discusses major developments that have occurred since 1991. Advances in the instrumentation and understanding of the key physical principles are the primary focus. Developments with electrospray and atmospheric pressure chemical ionization and variations encompassing adaptations for surface analysis, ambient air analysis, high throughput, and modification of the ionization mechanism are covered. An important and limiting consequence of atmospheric pressure chemical ionization, chemical noise, is discussed as is techniques being employed to ameliorate the problem. Ion transfer and transport from atmospheric pressure into deep vacuum is an area undergoing constant improvement and refinement so is given considerable consideration in this review.

Improving FAIMS sensitivity using a planar geometry with slit interfaces

Differential mobility spectrometry or field asymmetric waveform ion mobility spectrometry (FAIMS) is gaining broad acceptance for analyses of gas-phase ions, especially in conjunction with largely orthogonal separation methods such as mass spectrometry (MS) and/or conventional (drift tube) ion mobility spectrometry. In FAIMS, ions are filtered while passing through a gap between two electrodes that may have planar or curved (in particular, cylindrical) geometry. Despite substantial inherent advantages of the planar configuration and its near-universal adoption in current stand-alone FAIMS devices, commercial FAIMS/MS systems have employed curved FAIMS geometries that can be more effectively interfaced to MS. Here we report a new planar (p-) FAIMS design with slit-shaped entrance and exit apertures that substantially increase ion transmission in and out of the analyzer. The entrance slit interface effectively couples p-FAIMS to multi-emitter electrospray ionization (ESI) sources, improving greatly the ion current introduced to the device and allowing liquid flow rates up to approximately 50 microL/min. The exit slit interface increases the transmission of ribbon-shaped ion beams output by the p-FAIMS to downstream stages such as a MS. Overall, the ion signal in ESI/FAIMS/MS analyses increases by over an order of magnitude without affecting FAIMS resolution.

In situ SIMS analysis and reactions of surfaces prepared by soft landing of mass-selected cations and anions using an ion trap mass spectrometer

Mass-selected polyatomic cations and anions, produced by electrosonic spray ionization (ESSI), were deposited onto polycrystalline Au or fluorinated self-assembled monolayer (FSAM) surfaces by soft landing (SL), using a rectilinear ion trap (RIT) mass spectrometer. Protonated and deprotonated molecules, as well as intact cations and anions generated from such molecules as peptides, inorganic catalysts, and fluorescent dyes, were soft-landed onto the surfaces. Analysis of the modified surfaces was performed in situ by Cs(+) secondary ion mass spectrometry (SIMS) using the same RIT mass analyzer to characterize the sputtered ions as that used to mass select the primary ions for SL. Soft-landing times as short as 30 s provided surfaces that yielded good quality SIMS spectra. Chemical reactions of the surfaces modified by SL were generated in an attached reaction chamber into which the surface was transferred under vacuum. For example, a surface on which protonated triethanolamine had been soft landed was silylated using vapor-phase chlorotrimethylsilane before being returned still under vacuum to the preparation chamber where SIMS analysis revealed the silyloxy functionalization. SL and vapor-phase reactions are complementary methods of surface modification and in situ surface analysis by SIMS is a simple way to characterize the products produced by either technique.

A novel Fourier transform ion cyclotron resonance mass spectrometer with improved ion trapping and detection capabilities

A novel Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer has been developed for improved biomolecule analysis. A flared metal capillary and an electrodynamic ion funnel were installed in the source region of the instrument for improved ion transmission. The transfer quadrupole is divided into 19 segments, with the capacity for independent control of DC voltage biases for each segment. Restrained ion population transfer (RIPT) is used to transfer ions from the ion accumulation region to the ICR cell. The RIPT ion guide reduces mass discrimination that occurs as a result of time-of-flight effects associated with gated trapping. Increasing the number of applied DC bias voltages from 8 to 18 increases the number of ions that are effectively trapped in the ICR cell. The RIPT ion guide with a novel voltage profile applied during ion transfer provides a 3- to 4-fold increase in the number of ions that are trapped in the ICR cell compared with gated trapping for the same ion accumulation time period. A novel ICR cell was incorporated in the instrument to reduce radial electric field variation for ions with different z-axis oscillation amplitudes. With the ICR cell, called trapping ring electrode cell (TREC), we can tailor the shape of the trapping electric fields to reduce dephasing of coherent cyclotron motion of an excited ion packet. With TREC, nearly an order of magnitude increase in sensitivity is observed. The performance of the instrument with the combination of RIPT, TREC, flared inlet, and ion funnel is presented.

High-resolution ion cyclotron mobility spectrometry

A novel ion mobility spectrometry instrument incorporating a cyclotron geometry drift tube is presented. The drift tube consists of eight regions, four curved drift tubes and four ion funnels. Packets of ions are propagated around the drift tube by changing the drift field at a frequency that is resonant with the ion's drift time through each region. The approach trims each packet of ions as it leaves and enters each new region. An electrostatic gate allows ions to be kept in the drift tube for numerous cycles, increasing the ability to resolve specified ions. We demonstrate the approach by isolating the [M + 2H](2+) or [M + 3H](3+) charge state of substance P as well as individual trisaccharide isomers from a mixture of melezitose and raffinose. Resolving powers in excess of 300 are obtainable with this approach.

Automated gain control ion funnel trap for orthogonal time-of-flight mass spectrometry

Time-of-flight mass spectrometry (TOF MS) is increasingly used in proteomics research. Herein, we report on the development and characterization of a TOF MS instrument with improved sensitivity equipped with an electrodynamic ion funnel trap (IFT) that employs an automated gain control (AGC) capability. The IFT-TOF MS was coupled to a reversed-phase capillary liquid chromatography (RPLC) separation and evaluated in experiments with complex proteolytic digests. When applied to a global tryptic digest of Shewanella oneidensis proteins, an order-of-magnitude increase in sensitivity compared to that of the conventional continuous mode of operation was achieved due to efficient ion accumulation prior to TOF MS analysis. As a result of this sensitivity improvement and related improvement in mass measurement accuracy, the number of unique peptides identified in the AGC-IFT mode was 5-fold greater than that obtained in the continuous mode.

Elastomeric microchip electrospray emitter for stable cone-jet mode operation in the nanoflow regime

Despite widespread interest in combining laboratory-on-a-chip technologies with mass spectrometry (MS)-based analyses, the coupling of microfluidics to electrospray ionization (ESI)-MS remains challenging. We report a robust, integrated poly(dimethylsiloxane) microchip interface for ESI-MS using simple and widely accessible microfabrication procedures. The interface uses an auxiliary channel to provide electrical contact for the stable cone-jet electrospray without sample loss or dilution. The electric field at the channel terminus is enhanced by two vertical cuts that cause the interface to taper to a line rather than to a point, and the formation of a small Taylor cone at the channel exit ensures subnanoliter postcolumn dead volumes. Cone-jet mode electrospray was demonstrated for up to 90% aqueous solutions and for extended durations. Comparable ESI-MS sensitivities were achieved using both microchip and conventional fused silica capillary emitters, but stable cone-jet mode electrosprays could be established over a far broader range of flow rates (from 50-1000 nL/min) and applied potentials using the microchip emitters. This attribute of the microchip emitter should simplify electrospray optimization and make the stable electrospray more resistant to external perturbations.

Improving the efficiency of IMS-IMS by a combing technique

A simple method for increasing the efficiency of multidimensional ion mobility spectrometry (IMS-IMS) measurements (as defined by the number of two-dimensional data sets necessary to sample all of the ions in a complex mixture) is illustrated. In this approach, components from a packet containing a mixture of ions are introduced into the first IMS drift region where they are separated based on differences in mobility. At the exit of this region, narrow distributions of ions having identical mobilities are selected, subjected to gentle activation conditions that are intended to induce conformational changes, and transmitted into a second IMS drift region where the new conformations are separated. Here, we describe a simple timing sequence associated with selection and activation of multiple distributions at the entrance of the second drift region in a systematic fashion that improves the efficiency of two-dimensional IMS-IMS by a factor of approximately 8. The method is illustrated by examination of a mixture of tryptic peptides from human hemoglobin.

A homemade high-resolution orthogonal-injection time-of-flight mass spectrometer with a heated capillary inlet

We describe a homemade high-resolution orthogonal-injection time-of-flight (O-TOF) mass spectrometer combing a heated capillary inlet. The O-TOF uses a heated capillary tube combined with a radio-frequency only quadrupole (rf-only quadrupole) as an interface to help the ion transmission from the atmospheric pressure to the low-pressure regions. The principle, configuration of the O-TOF, and the performance of the instrument are introduced in this paper. With electrospray ion source, the performances of the mass resolution, the sensitivity, the mass range, and the mass accuracy are described. We also include our results obtained by coupling atmospheric pressure matrix-assisted laser deporption ionization with this instrument.

Application of proteomics in the discovery of candidate protein biomarkers in a diabetes autoantibody standardization program sample subset

Novel biomarkers of type 1 diabetes must be identified and validated in initial, exploratory studies before they can be assessed in proficiency evaluations. Currently, untargeted "-omics" approaches are underutilized in profiling studies of clinical samples. This report describes the evaluation of capillary liquid chromatography (LC) coupled with mass spectrometry (MS) in a pilot proteomic analysis of human plasma and serum from a subset of control and type 1 diabetic individuals enrolled in the Diabetes Autoantibody Standardization Program, with the goal of identifying candidate biomarkers of type 1 diabetes. Initial high-resolution capillary LC-MS/MS experiments were performed to augment an existing plasma peptide database, while subsequent LC-FTICR studies identified quantitative differences in the abundance of plasma proteins. Analysis of LC-FTICR proteomic data identified five candidate protein biomarkers of type 1 diabetes. alpha-2-Glycoprotein 1 (zinc), corticosteroid-binding globulin, and lumican were 2-fold up-regulated in type 1 diabetic samples relative to control samples, whereas clusterin and serotransferrin were 2-fold up-regulated in control samples relative to type 1 diabetic samples. Observed perturbations in the levels of all five proteins are consistent with the metabolic aberrations found in type 1 diabetes. While the discovery of these candidate protein biomarkers of type 1 diabetes is encouraging, follow up studies are required for validation in a larger population of individuals and for determination of laboratory-defined sensitivity and specificity values using blinded samples.

Design and Performance of an Instrument for Soft Landing of Biomolecular Ions on Surfaces

A new ion deposition apparatus was designed and constructed in our laboratory. Our research objectives were to investigate interactions of biomolecules with hydrophilic and hydrophobic surfaces and to carry out exploratory experiments aimed at highly selective deposition of spatially defined and uniquely selected biological molecules on surfaces. The apparatus includes a high-transmission electrospray ion source, a quadrupole mass filter, a bending quadrupole that deflects the ion beam and prevents neutral molecules originating in the ion source from impacting the surface, an ultrahigh vacuum (UHV) chamber for ion deposition by soft landing, and a vacuum lock system for introducing surfaces into the UHV chamber without breaking vacuum. Ex situ analysis of surfaces following soft landing of mass-selected peptide ions was performed using 15 keV Ga+ time-of-flight secondary ion mass spectrometry and grazing incidence infrared reflection-absorption spectroscopy. It is shown that these two techniques are highly complementary methods for characterization of surfaces prepared with a range of doses of mass-selected biomolecular ions. We also demonstrated that soft landing of peptide ions on surfaces can be utilized for controlled preparation of peptide films of known coverage for fundamental studies of matrix effects in SIMS.

Mapping the human plasma proteome by SCX-LC-IMS-MS

The advent of on-line multidimensional liquid chromatography-mass spectrometry has significantly impacted proteomic analyses of complex biological fluids such as plasma. However, there is general agreement that additional advances to enhance the peak capacity of such platforms are required to enhance the accuracy and coverage of proteome maps of such fluids. Here, we describe the combination of strong-cation-exchange and reversed-phase liquid chromatographies with ion mobility and mass spectrometry as a means of characterizing the complex mixture of proteins associated with the human plasma proteome. The increase in separation capacity associated with inclusion of the ion mobility separation leads to generation of one of the most extensive proteome maps to date. The map is generated by analyzing plasma samples of five healthy humans; we report a preliminary identification of 9087 proteins from 37,842 unique peptide assignments. An analysis of expected false-positive rates leads to a high-confidence identification of 2928 proteins. The results are catalogued in a fashion that includes positions and intensities of assigned features observed in the datasets as well as pertinent identification information such as protein accession number, mass, and homology score/confidence indicators. Comparisons of the assigned features reported here with other datasets shows substantial agreement with respect to the first several hundred entries; there is far less agreement associated with detection of lower abundance components.

An electrospray ionization source for thermochemical investigation with the guided ion beam mass spectrometer

An electrospray ionization (ESI) source developed for use with the guided ion beam tandem mass spectrometer (GIBMS) is described. For accurate determination of thermochemistry using threshold collision-induced dissociation (TCID), it is essential that any source produces ions with four exacting characteristics: (1) high intensity, (2) stable signal, and well-defined energies both (3) kinetic, and (4) internal. To accomplish these objectives, the ions generated by the electrospray are collected using a radio frequency electrodynamic ion funnel and are then transferred into a hexapole ion guide where they are thermalized and subsequently passed into higher-vacuum regions for analysis. The resulting ion intensities using this source can exceed 10(6) ions/s. Stable beams (<10% variation in signal) can be generated over multiple hours. The kinetic energy distribution of ions emerging from this source has been shown to be well described by a Gaussian distribution with a full width half maximum (FWHM) of about 0.1-0.2 eV in the laboratory frame of reference. Finally, TCID results for ions generated with this source show excellent agreement with previously reported threshold values for ions generated using a variety of sources and experimental methodologies. This confirms that internal energies of the ions are well described by a Maxwell-Boltzmann distribution at room temperature.

An IMS-IMS analogue of MS-MS

The development of a new ion mobility/mass spectrometry instrument that incorporates a multifield drift tube/ion funnel design is described. In this instrument, individual components from a mixture of ions can be resolved and selected on the basis of mobility differences prior to collisional activation inside the drift tube. The fragment ions that are produced can be dispersed again in a second ion mobility spectrometry (IMS) region prior to additional collisional activation and MS analysis. The result is an IMS-IMS analogue of MS-MS. Here, we describe the preliminary instrumental design and experimental approach. We illustrate the approach by examining the highly characterized bradykinin and ubiquitin systems. Mobility-resolved fragment ions of bradykinin show that b-type ions are readily discernible fragments, because they exist as two easily resolvable structural types. Current limitations and future directions are briefly discussed.

Preparative separation of mixtures by mass spectrometry

A specially designed mass spectrometer which allows for preparative separation of mixtures is described. This mass spectrometer allows for large ion currents, on the order of nanoamperes, to be produced by electrospray and transmitted into a high vacuum. Accumulation of nanomole quantities of collected and recovered material in several hours is demonstrated. The use of high-velocity ions reduces space charge effects at high ion currents. Separation of mass occurs simultaneously for all ions, providing a 100% duty cycle. The use of a linear dispersion magnet avoids compression at higher m/z ratios. A deceleration lens slows the ions to allow for soft landing at low kinetic energy. The ions are neutralized by ion pairing on an oxidized metal surface. Retractable landing plates allow for easy removal of the separated components.

Enhanced in-vitro blood compatibility of 316L stainless steel surfaces by reactive landing of hyaluronan ions

A novel dry process for immobilization of hyaluronan on stainless steel surfaces is presented. This process that we call reactive landing is based on an interaction of hyperthermal gas-phase hyaluronan ions with plasma-cleaned and activated stainless steel surfaces. Reactive landing is performed on a unique instrument that combines an in-situ plasma reactor with an electrospray ion source and ion transfer optics. Gas-phase hyaluronan anions are obtained by electrospray ionization of sodium hyaluronan solutions and immobilized by reactive landing on large-area stainless steel surfaces. The immobilized hyaluronan withstands extensive washing with polar solvents and solutions, and the washed surfaces maintain the protective properties against blood platelet activation. The mechanism of hyaluronan discharge and immobilization is discussed.

Gentle protein ionization assisted by high-velocity gas flow

Gentle protein electrospray ionization is achieved using the high-velocity gas flow of an air amplifier to improve desolvation in conventional ESI and generate intact folded protein ions in the gas phase. Comparisons are made between the ESI spectra of a number of model proteins, including ubiquitin, cytochrome c, lysozyme, and myoglobin, over a range of pH values under optimized conditions, with and without using an air amplifier to achieve high-velocity gas flow. Previously reported increased ion signals are confirmed. In addition, the peaks recorded using the air amplifier are shown to be narrower, corresponding to more complete desolvation. Significant changes in the charge-state distribution also are observed, with a shift to lower charge state at high-velocity flow. The relationship between the observed charge-state distribution and protein conformation was explored by comparing the charge-state shifts and the distributions of charge states for proteins that are or are not stable in their native conformations in low pH solutions. The data suggest retention of native or nativelike protein conformations using the air amplifier in all cases examined. This is explained by a mechanism in which the air amplifier rapidly creates small droplets from the original large ESI droplets and these microdroplets then desolvate without a significant decrease in pH, resulting in retention of the folded protein conformations. Furthermore, the holoform of ionized myoglobin is visible at pH 3.5, a much lower value than the minimum needed to see this form in conventional ESI. These results provide evidence for the importance of the conditions used in the desolvation process for the preservation of the protein conformation and suggest that the conditions achieved when using high-velocity gas flows to assist droplet evaporation and ion desolvation are much gentler than those in conventional ESI experiments.

Preparative soft and reactive landing of multiply charged protein ions on a plasma-treated metal surface

Soft landing on a plasma-treated metal surface of multiply protonated protein ions from the gas phase results in a substantial retention of protein function, as demonstrated for trypsin and streptavidin. The majority of trypsin ions soft-landed at hyperthermal kinetic energies are undamaged and retain 72-98% of enzymatic activity after being washed into solution. A small fraction of trypsin ions that were landed at nominal kinetic energies of 130-200 eV remain tethered to the surface and show approximately 50% enzymatic activity. The streptavidin tetramer is found to dissociate to monomer units upon multiple charging in electrospray. The majority of soft-landed monomers can be washed into solution where they show affinity to biotin. The layer of streptavidin monomer that is immobilized on the surface can be detected if fluorescence-tagged and retains the ability to reversibly bind biotin. A mechanism is proposed to explain nondestructive protein ion discharge on the surface that considers proton migration from the soft-landed cations to the metal oxide layer and metal ion reduction by electron transfer from the bulk metal.

Assessing the peak capacity of IMS-IMS separations of tryptic peptide ions in He at 300 K

Two-dimensional ion mobility spectrometry (IMS-IMS) coupled with mass spectrometry is examined as a means of separating mixtures of tryptic peptides (from myoglobin and hemoglobin). In this study, we utilize two distinct drift regions that are identical in that each contains He buffer gas at 300 K. The two-dimensional advantage is realized by changing the structures of the ions. As ions arrive at the end of the first drift region, those of a specified mobility are selected, exposed to energizing collisions, and then introduced into a second drift region. Upon collisional activation, some ions undergo structural transitions, leading to substantial changes in their mobilities; others undergo only slight (or no) mobility changes. Examination of peak positions and shapes for peptides that are separated in the first IMS dimension indicates experimental peak capacities ranging from approximately 60 to 80; the peak shapes and range of changes in mobility that are observed in the second drift region (after activation) indicate a capacity enhancement ranging from a factor of approximately 7 to 17. Thus, experimental (and theoretical) evaluation of the peak capacity of IMS-IMS operated in this fashion indicates that capacities of approximately 480 to 1360 are accessible for peptides. Molecular modeling techniques are used to simulate the range of structural changes that would be expected for tryptic peptide ions and are consistent with the experimental shifts that are observed.

Toward plasma proteome profiling with ion mobility-mass spectrometry

Differential, functional, and mapping proteomic analyses of complex biological mixtures suffer from a lack of component resolution. Here we describe the application of ion mobility-mass spectrometry (IMS-MS) to this problem. With this approach, components that are separated by liquid chromatography are dispersed based on differences in their mobilities through a buffer gas prior to being analyzed by MS. The inclusion of the gas-phase dispersion provides more than an order of magnitude enhancement in component resolution at no cost to data acquisition time. Additionally, the mobility separation often removes high-abundance species from spectral regions containing low-abundance species, effectively increasing measurement sensitivity and dynamic range. Finally, collision-induced dissociation of all ions can be recorded in a single experimental sequence while conventional MS methods sequentially select precursors. The approach is demonstrated in a single, rapid (3.3 h) analysis of a plasma digest sample where abundant proteins have not been removed. Protein database searches have yielded 731 high confidence peptide assignments corresponding to 438 unique proteins. Results have been compiled into an initial analytical map to be used -after further augmentation and refinement- for comparative plasma profiling studies.

Polyaniline-coated nanoelectrospray emitters treated with hydrophobic polymers at the tip

In nanoelectrospray ionization (nanoESI) techniques, the hydrophilic character of the emitters generally produces large bases for the Taylor cones, thereby generating relatively large droplet sizes and consequently reduced sensitivity. In order to minimize this 'wetting' effect in nanoESI, a model hydrophobic polymer (an acrylic paint) was coated at the tip of commercial polyaniline (PANI)-coated emitters, and their performance was compared with that of unmodified PANI emitters using oxytocin and neuropeptide Y (NPY) solutions. In experiments with oxytocin, the hydrophobic emitter produced higher signal intensities (up to 3.6 times) as well as higher signal-to-noise ratios (33% increase) than those from the unmodified PANI emitter. In addition, the hydrophobic emitter showed reusability and a slightly wider linear dynamic range (10 nM to 50 microM, r2=0.9938) than that from the unmodified PANI emitter (10 nM to 10 microM, r2=0.9904). In the case of NPY, the hydrophobic emitter also enabled an approximately 350-fold overall increase in sensitivity than the unmodified PANI emitter (70 zmol vs. 25 amol). The enhanced performance of the hydrophobic emitter clearly indicates potential for further increases in nanoESI sensitivity using emitters with tailored hydrophobic overcoatings.

Design and performance of an atmospheric pressure ion mobility Fourier transform ion cyclotron resonance mass spectrometer

This manuscript presents our initial results and development of a novel hybrid instrument that combines atmospheric pressure ion mobility spectrometry (AP-IMS) with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Our preliminary results obtained from atmospheric pressure mobility separation of peptide mixtures combined with high-resolution FTICR mass analysis are demonstrated. The custom IMS system was constructed in-house and was coupled to the commercial FTICR-MS instrument through a flared inlet capillary interface. Dual-gate ion filtration was adapted to allow concurrent measurement of both mobility and m/z values. The feasibility of mobility separation was demonstrated with baseline separation of the peptides bradykinin and angiotensin II and their measured reduced mobility constants which were consistent with those previously reported. Furthermore, the unique size-to-charge separation mechanism of IMS that allows isomer separation was explored and demonstrated with the partial separation of two isomeric phosphopeptides. We feel the combination of IMS and FTICR-MS holds great potential for accurate mass analysis of mobility-selected ions and these results are the first to demonstrate the feasibility of coupling these two techniques.

Combining capillary with radio-frequency-only quadrupole as an interface for a home-made time-of-flight mass spectrometer

A heated capillary tube combined with a radio-frequency-only quadrupole has been coupled with a home- made, high-resolution orthogonal-injection, time-of-flight mass spectrometer to improve ion transmission from the atmospheric pressure to the low--pressure regions. With an electrospray ion source, the performance of the interface on the intensity of spectra was investigated. For electrospray ionization, the ion intensity detected on the time-of- flight mass spectrometer was seen to increase three-fold compared with an orifice interface. It has been shown that the enhanced ion inlet designs can not only increase the ion translation efficiency, but also improve the detection limits of the mass spectrometer. Coupling atmospheric pressure matrix-assisted laser desorption/ionization with the improved interface resulted in an instrument detection limit as low as 2.5 fmol.

Aerodynamic mass spectrometry interfacing of microdevices without electrospray tips

A new concept for electrospray coupling of microfluidic devices with mass spectrometry was developed. The sampling orifice of the time-of-flight mass spectrometer was modified with an external adapter assisting in formation and transport of the electrosprayed plume from the multichannel polycarbonate microdevice. The compact disk sized microdevice was designed with radial channels extending to the circumference of the disk. The electrospray exit ports were formed by the channel openings on the surface of the disk rim. No additional tips at the channel exits were used. Electrospray was initiated directly from the channel openings by applying high voltage between sample wells and the entrance of the external adapter. The formation of the spatially unstable droplet at the electrospray openings was eliminated by air suction provided by a pump connected to the external adapter. Compared with the air intake through the original mass spectrometer sampling orifice, more than an order of magnitude higher flow rate was achieved for efficient transport of the electrospray plume into the mass spectrometer. Additional experiments with electric potentials applied between the entrance sections of the external adapter and the mass spectrometer indicated that the air flow was the dominant transport mechanism. Basic properties of the system were tested using mathematical modeling and characterized using ESI/TOF-MS measurements of peptide and protein samples.

Transfer of structural elements from compact to extended states in unsolvated ubiquitin

Multidimensional ion mobility spectrometry techniques (IMS-IMS and IMS-IMS-IMS) combined with mass spectrometry are used to study structural transitions of ubiquitin ions in the gas phase. It is possible to select and activate narrow distributions of compact and partially folded conformation types and examine new distributions of structures that are formed. Different compact conformations unfold, producing a range of new partially folded states and three resolvable peaks associated with elongated conformers. Under gentle activation conditions, the final populations of the three elongated forms depend on the initial structures of the selected ions. This requires that some memory of the compact state (most likely secondary structure) is preserved along the unfolding pathway. Activation of selected, partially folded intermediates (formed from specific compact states) leads to elongated state populations that are consistent with the initial selected compact form-evidence that intermediates not only retain elements of initial structure but also are capable of transmitting structure to final states.

Improving mass spectrometer sensitivity using a high-pressure electrodynamic ion funnel interface

We report on a new electrodynamic ion funnel that operates at a pressure of 30 torr with no loss of ion transmission. The enhanced performance compared with previous ion funnel designs optimized for pressures of <5 torr was achieved by reducing the ion funnel capacitance and increasing the RF drive frequency (1.7 MHz) and amplitude (100-170 V peak-to-peak). No degradation of ion transmission was observed for pressures from 2 to 30 torr. The ability to operate at higher pressure enabled a new tandem ion funnel mass spectrometer interface design that can accommodate a greater gas load (e.g., from an ESI source). When combined with a multicapillary inlet, the interface provided more efficient introduction of ions, resulting in a significant enhancement in mass spectrometer sensitivity and detection limits.

Split-Field Drift Tube/Mass Spectrometry and Isotopic Labeling Techniques for Determination of Single Amino Acid Polymorphisms

A combination of split-field drift tube/mass spectrometry and isotopic labeling techniques is evaluated as a means of identifying single amino acid polymorphisms (SAAPs) in proteins. The method is demonstrated using cytochromec (equine and bovine) and hemoglobin (bovine and sheep). For these studies, proteins from different species are digested with trypsin, and the peptides are labeled at primary amine groups [using either a light (H(3))- or heavy (D(3))-isotopic reagent]. SAAP analysis is carried out by mixing the light-labeled peptides of one species with the heavy-labeled peptides of the other and electrospraying the resulting mixture into a split-field drift tube/mass spectrometer. Peptides having the same sequence in both species appear as doublets in the mass spectrum [shifted in mass-to-charge (m/z) according to the number of incorporated labels]; additionally, these species have identical mobility distributions. Peptides having sequences that differ by one amino acid appear as peaks in the mass spectrum that are shifted in m/z according to the mass difference associated with the SAAP and the number of incorporated labels. The ion mobility distributions for these peptides (differing by only a single amino acid) can often be rationalized by their expected similarities or differences providing additional evidence that they are related. In all, 12 and 26 peptide variants (between species) corresponding to 5 and 11 amino acid polymorphisms have been identified for the cytochrome c and hemoglobin protein samples, respectively.

Incorporation of a flared inlet capillary tube on a fourier transform ion cyclotron resonance mass spectrometer

Flared inlet capillary tubes have been coupled with a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer to help the ion transmission from the atmospheric pressure to the first vacuum region. We investigated different types of atmospheric pressure ionization methods using flared inlet tubes. For most of the ionization methods, such as ESI and DESI, increased ion current transmitted from the atmospheric pressure ion source to the first stage vacuum system was observed with the use of our enhanced ion inlet designs. The corresponding ion intensity detected on a FT-ICR mass spectrometer was also observed to increase two- to fivefold using ESI or DESI with the flared tube inlet. Moreover, increased spray tip positional tolerance was observed with implementation of the flared inlet tube. We also include our preliminary results obtained by coupling AP-MALDI with flared inlet tube in this paper. For AP-MALDI, the measured ion current transferred through the flared inlet tube was about 2 to 3 times larger than the ion current through the control non-flared inlet tube.

New interface plate for microspray ionization mass spectrometry

A new interface plate was employed in microspray ionization mass spectrometry (microESI-MS) to improve ion transmission from the sprayer into the sampling nozzle of the mass spectrometer at atmospheric pressure. Using a time-of-flight mass spectrometer (TOFMS), a fivefold increase in ion intensity and a sevenfold reduction in method detection limit were observed. The interface plate attenuated the dependence of the ion intensity on the sprayer position. Even when the distance between the sprayer tip and sampling nozzle was 15.0 mm, ion signals were still stronger than when the sprayer tip was positioned 3.0 mm in front of the sampling nozzle with the original interface plate. This enhancement in the performance of microESI-MS was due to the improved shapes of the equipotential lines near the sprayer tip and the long desolvation distance between the sprayer and the sampling nozzle of the MS.