Millisecond radiolytic modification of peptides by synchrotron X-rays identified by mass spectrometry

Sulfate radical anion as a new reagent for fast photochemical oxidation of proteins

The focus is to expand the original design of fast photochemical oxidation of proteins (FPOP) and introduce SO(4)(-•), generated by 248 nm homolysis of low millimolar levels of persulfate, as a radical reactant in protein footprinting. FPOP is a chemical approach to footprinting proteins and protein complexes by "snapshot" reaction with free radicals. The radical used until now is the OH radical, and it provides a measure of residue-resolved solvent accessibility of the native protein. We show that FPOP can accommodate other reagents, increasing its versatility. The new persulfate FPOP system is a potent, nonspecific, and tunable footprinting method; 3-5 times less persulfate is needed to give the same global levels of modification as seen with OH radicals. Although solvent-exposed His and Tyr residues are more reactive with SO(4)(-•) than with (•)OH, oxidation of apomyoglobin and calmodulin shows that (•)OH probes smaller accessible areas than SO(4)(-•), with the possible exception of histidine. His64, an axial ligand in the heme-binding pocket of apomyoglobin, is substantially up-labeled by SO(4)(-•) relative to (•)OH. Nevertheless, the kinds of modification and residue selectivity for both reagent radicals are strikingly similar. Thus, the choice of these reagents relies on the physical properties, particularly the membrane permeability, of the radical precursors.

Oxidative protein labeling in mass-spectrometry-based proteomics

Oxidation of proteins and peptides is a common phenomenon, and can be employed as a labeling technique for mass-spectrometry-based proteomics. Nonspecific oxidative labeling methods can modify almost any amino acid residue in a protein or only surface-exposed regions. Specific agents may label reactive functional groups in amino acids, primarily cysteine, methionine, tyrosine, and tryptophan. Nonspecific radical intermediates (reactive oxygen, nitrogen, or halogen species) can be produced by chemical, photochemical, electrochemical, or enzymatic methods. More targeted oxidation can be achieved by chemical reagents but also by direct electrochemical oxidation, which opens the way to instrumental labeling methods. Oxidative labeling of amino acids in the context of liquid chromatography(LC)-mass spectrometry (MS) based proteomics allows for differential LC separation, improved MS ionization, and label-specific fragmentation and detection. Oxidation of proteins can create new reactive groups which are useful for secondary, more conventional derivatization reactions with, e.g., fluorescent labels. This review summarizes reactions of oxidizing agents with peptides and proteins, the corresponding methodologies and instrumentation, and the major, innovative applications of oxidative protein labeling described in selected literature from the last decade.

Mass spectrometry combined with oxidative labeling for exploring protein structure and folding

This review discusses various mass spectrometry (MS)-based approaches for exploring structural aspects of proteins in solution. Electrospray ionization (ESI)-MS, in particular, has found fascinating applications in this area. For example, when used in conjunction with solution-phase hydrogen/deuterium exchange (HDX), ESI-MS is a highly sensitive tool for probing conformational dynamics. The main focus of this article is a technique that is complementary to HDX, that is, the covalent labeling of proteins by hydroxyl radicals. The reactivity of individual amino acid side chains with *OH is strongly affected by their degree of solvent exposure. Thus, analysis of the oxidative labeling pattern by peptide mapping and tandem mass spectrometry provides detailed structural information. A convenient method for *OH production is the photolysis of H(2)O(2) by a pulsed UV laser, resulting in oxidative labeling on the microsecond time scale. Selected examples demonstrate the use of this technique for structural studies on membrane proteins, and the combination with rapid mixing devices for characterizing the properties of short-lived protein (un)folding intermediates.

Visualizing water molecules in transmembrane proteins using radiolytic labeling methods

Essential to cells and their organelles, water is both shuttled to where it is needed and trapped within cellular compartments and structures. Moreover, ordered waters within protein structures often colocalize with strategically placed polar or charged groups critical for protein function, yet it is unclear if these ordered water molecules provide structural stabilization, mediate conformational changes in signaling, neutralize charged residues, or carry out a combination of all these functions. Structures of many integral membrane proteins, including G protein-coupled receptors (GPCRs), reveal the presence of ordered water molecules that may act like prosthetic groups in a manner quite unlike bulk water. Identification of "ordered" waters within a crystalline protein structure requires sufficient occupancy of water to enable its detection in the protein's X-ray diffraction pattern, and thus, the observed waters likely represent a subset of tightly bound functional waters. In this review, we highlight recent studies that suggest the structures of ordered waters within GPCRs are as conserved (and thus as important) as conserved side chains. In addition, methods of radiolysis, coupled to structural mass spectrometry (protein footprinting), reveal dynamic changes in water structure that mediate transmembrane signaling. The idea of water as a prosthetic group mediating chemical reaction dynamics is not new in fields such as catalysis. However, the concept of water as a mediator of conformational dynamics in signaling is just emerging, because of advances in both crystallographic structure determination and new methods of protein footprinting. Although oil and water do not mix, understanding the roles of water is essential to understanding the function of membrane proteins.

Integrated algorithms for high-throughput examination of covalently labeled biomolecules by structural mass spectrometry

Mass spectrometry based structural proteomics approaches for probing protein structures are increasingly gaining in popularity. The potential for such studies is limited because of the lack of analytical techniques for the automated interpretation of resulting data. In this article, a suite of algorithms called ProtMapMS is developed, integrated, and implemented specifically for the comprehensive automatic analysis of mass spectrometry data obtained for protein structure studies using covalent labeling. The functions include data format conversion, mass spectrum interpretation, detection, and verification of all peptide species, confirmation of the modified peptide products, and quantification of the extent of peptide modification. The results thus obtained provide valuable data for use in combination with computational approaches for protein structure modeling. The structures of both monomeric and hexameric forms of insulin were investigated by oxidative protein footprinting followed by high-resolution mass spectrometry. The resultant data was analyzed both manually and using ProtMapMS without any manual intervention. The results obtained using the two methods were found to be in close agreement and overall were consistent with predictions from the crystallographic structure.

Structural waters define a functional channel mediating activation of the GPCR, rhodopsin

Structural water molecules may act as prosthetic groups indispensable for proper protein function. In the case of allosteric activation of G protein-coupled receptors (GPCRs), water likely imparts structural plasticity required for agonist-induced signal transmission. Inspection of structures of GPCR superfamily members reveals the presence of conserved embedded water molecules likely important to GPCR function. Coupling radiolytic hydroxyl radical labeling with rapid H(2)O(18) solvent mixing, we observed no exchange of these structural waters with bulk solvent in either ground state or for the Meta II or opsin states. However, the radiolysis approach permitted labeling of selected side chain residues within the transmembrane helices and revealed activation-induced changes in local structural constraints likely mediated by dynamics of both water and protein. These results suggest both a possible general mechanism for water-dependent communication in family A GPCRs based on structural conservation, and a strategy for probing membrane protein structure.

Painting proteins with covalent labels: what's in the picture?

Knowledge about the structural and biophysical properties of proteins when they are free in solution and/or in complexes with other molecules is essential for understanding the biological processes that proteins regulate. Such knowledge is also important to drug discovery efforts, particularly those focused on the development of therapeutic agents with protein targets. In the last decade a variety of different covalent labeling techniques have been used in combination with mass spectrometry to probe the solution-phase structures and biophysical properties of proteins and protein-ligand complexes. Highlighted here are five different mass spectrometry-based covalent labeling strategies including: continuous hydrogen/deuterium (H/D) exchange labeling, hydroxyl radical-mediated footprinting, SUPREX (stability of unpurified proteins from rates of H/D exchange), PLIMSTEX (protein-ligand interaction by mass spectrometry, titration, and H/D exchange), and SPROX (stability of proteins from rates of oxidation). The basic experimental protocols used in each of the above-cited methods are summarized along with the kind of biophysical information they generate. Also discussed are the relative strengths and weaknesses of the different methods for probing the wide range of conformational states that proteins and protein-ligand complexes can adopt when they are in solution.

Detection and structural features of the betaB2-B3-crystallin heterodimer by radical probe mass spectrometry (RP-MS)

The predilection of the beta-crystallin B2 subunit to interact with the betaB3 subunit rather than self associate is evident by the detection of the betaB2-B3-crystallin heterodimer by native gel electrophoresis and electrospray ionisation time-of-flight (ESI-TOF) mass spectrometry under non denaturing conditions. The complex has been detected for the first time and its molecular mass is measured to be 47,450 +/- 1 Da. Radical probe mass spectrometry (RP-MS) was subsequently applied to investigate the nature of the heterodimer through the limited oxidation of the subunits in the complex. Two peptide segments of the betaB2 subunit and six of the betaB3 subunit were found to oxidise, with far greater oxidation observed within the betaB3 versus the betaB2 subunit. This, and the observation that the oxidation data of betaB2 subunit is inconsistent with the structure of the betaB2 monomer, demonstrates that the protection of betaB2 is conferred by its association with betaB3 subunit within the heterodimer where only the residues of, and towards, its N-terminal domain remain exposed to solvent. The results suggest that the betaB2 subunit adopts a more compacted form than in its monomeric form in order for much of its structure to be enveloped by the betaB3 subunit within the heterodimer.

Mapping of RNA-protein interactions

RNA-protein interactions are important biological events that perform multiple functions in all living organisms. The wide range of RNA interactions demands diverse conformations to provide contacts for the selective recognition of proteins. Various analytical procedures are presently available for quantitative analyses of RNA-protein complexes, but analytical-based mapping of these complexes is essential to probe specific interactions. In this overview, interactions of functional RNAs and RNA-aptamers with target proteins are discussed by means of mapping strategies.

Structural analysis of RNA in living cells by in vivo synchrotron X-ray footprinting

Chemical footprinting methods are widely used to probe the solution structures of nucleic acids and their complexes. Among the many available modifying reagents, hydroxyl radical is exceptional in its ability to provide nucleotide-level information on the solvent accessibility of the nucleic acid backbone. Until recently, hydroxyl radical footprinting has been limited to in vitro experiments. We describe the use of synchrotron X-radiation to generate hydroxyl radicals within cells for effective footprinting of RNA-protein complexes in vivo. This technique gives results that are consistent with in vitro footprinting experiments, with differences reflecting apparent structural changes to the RNA in vivo.

Quantifying protein interface footprinting by hydroxyl radical oxidation and molecular dynamics simulation: application to galectin-1

Biomolecular surface mapping methods offer an important alternative method for characterizing protein-protein and protein-ligand interactions in cases in which it is not possible to determine high-resolution three-dimensional (3D) structures of complexes. Hydroxyl radical footprinting offers a significant advance in footprint resolution compared with traditional chemical derivatization. Here we present results of footprinting performed with hydroxyl radicals generated on the nanosecond time scale by laser-induced photodissociation of hydrogen peroxide. We applied this emerging method to a carbohydrate-binding protein, galectin-1. Since galectin-1 occurs as a homodimer, footprinting was employed to characterize the interface of the monomeric subunits. Efficient analysis of the mass spectrometry data for the oxidized protein was achieved with the recently developed ByOnic (Palo Alto, CA) software that was altered to handle the large number of modifications arising from side-chain oxidation. Quantification of the level of oxidation has been achieved by employing spectral intensities for all of the observed oxidation states on a per-residue basis. The level of accuracy achievable from spectral intensities was determined by examination of mixtures of synthetic peptides related to those present after oxidation and tryptic digestion of galectin-1. A direct relationship between side-chain solvent accessibility and level of oxidation emerged, which enabled the prediction of the level of oxidation given the 3D structure of the protein. The precision of this relationship was enhanced through the use of average solvent accessibilities computed from 10 ns molecular dynamics simulations of the protein.

Identifying protein interactions by hydroxyl-radical protein footprinting

Hydroxyl-radical protein footprinting is a straightforward and direct method to map protein sites involved in macromolecular interactions. The first step is to radioactively end-label the protein. Using hydroxyl radicals as a peptide backbone cleavage reagent, the protein is then cleaved in the absence and presence of ligand. Cleavage products are separated by high resolution gel electrophoresis. The digital image of the footprinting gel can be subjected to quantitative analysis to identify changes in the sensitivity of the protein to hydroxyl-radical cleavage. Molecular weight markers are electrophoresed on the same gel and hydroxyl-radical cleavage sites assigned by interpolation between the known cleavage sites of the markers. The results are presented in the form of a difference plot that shows regions of the protein that change their susceptibility to cleavage while bound to a ligand.

Protein structure and dynamics studied by mass spectrometry: H/D exchange, hydroxyl radical labeling, and related approaches

Mass spectrometry (MS) plays a central role in studies on protein structure and dynamics. This review highlights some of the recent developments in this area, with focus on applications involving the use of electrospray ionization (ESI) MS. Although this technique involves the transformation of analytes into highly nonphysiological species (desolvated gas-phase ions in the vacuum), ESI-MS can provide detailed insights into the solution-phase behavior of proteins. Notably, the ionization process itself occurs in a structurally sensitive manner. An increased degree of solution-phase unfolding is correlated with a higher level of protonation. Also, ESI allows the transfer of intact noncovalent complexes into the gas phase, thereby yielding information on binding partners, stoichiometries, and even affinities. A particular focus of this article is the use of hydrogen/deuterium exchange (HDX) methods and hydroxyl radical (.OH) labeling for monitoring dynamic and structural aspect of solution-phase proteins. Conceptual similarities and differences between the two methods are discussed. We describe a simple method for the computational simulation of protein HDX patterns, a tool that can be helpful for the interpretation of isotope exchange data recorded under mixed EX1/EX2 conditions. Important aspects of .OH labeling include a striking dependence on protein concentration, and the tendency of commonly used solvent additives to act as highly effective radical scavengers. If not properly controlled, both of these factors may lead to experimental artifacts.

Following molecular transitions with single residue spatial and millisecond time resolution

"Footprinting" describes assays in which ligand binding or structure formation protects polymers such as nucleic acids and proteins from either cleavage or modification; footprinting allows the accessibility of individual residues to be mapped in solution. Equilibrium and time-dependent footprinting links site-specific structural information with thermodynamic and kinetic transitions, respectively. The hydroxyl radical (*OH) is a uniquely insightful footprinting probe by virtue of it being among the most reactive chemical oxidants; it reports the solvent accessibility of reactive sites on macromolecules with as fine as a single residue resolution. A novel method of millisecond time-resolved *OH footprinting is presented based on the Fenton reaction, Fe(II) + H(2)O(2) --> Fe(III) + *OH + OH(-). It is implemented using a standard three-syringe quench-flow mixer. The utility of this method is demonstrated by its application to the studies on RNA folding. Its applicability to a broad range of biological questions involving the function of DNA, RNA, and proteins is discussed.

Effects of Protein Concentration on the Extent of γ-Ray-Mediated Oxidative Labeling Studied by Electrospray Mass Spectrometry

Exposure of aqueous protein solutions to gamma-rays results in the formation of *OH radicals that readily react with solvent-exposed amino acid side chains. The incorporation of oxygen leads to peak progressions with a spacing of 16 Da in the mass distribution of the polypeptide chain. Unlike some other oxidative labeling strategies, these radiolysis experiments do not require solution additives that could interfere with the analysis or that might cause secondary oxidation processes. Using myoglobin as a model system, we demonstrate that the level of oxidative labeling depends critically on the protein concentration. If ignored, this effect may lead to ambiguities in the interpretation of experiments employing *OH labeling for monitoring solvent-accessible surface areas, protein folding, and protein-protein interactions. We present a simple analysis that allows oxidation to be interpreted as a process with exponential kinetics, characterized by an apparent rate constant of the form kapp=kRAD/([P]tot+B), where kRAD is the primary rate of hydroxyl radical production, B is a constant, and [P]tot is the total protein concentration. While oxidative labeling may trigger some changes in protein conformation, it is found that the magnitude of this effect is surprisingly small, a result that is consistent with observations previously made by others.

Improved sequencing of oxidized cysteine and methionine containing peptides using electron transfer dissociation

Oxidative modifications to the side chains of sulfur-containing amino acids often limit the number of product ions formed during collision-induced dissociation (CID) and thus make it difficult to obtain sequence information for oxidized peptides. In this work, we demonstrate that electron-transfer dissociation (ETD) can be used to improve the sequence information obtained from peptides with oxidized cysteine and methionine residues. In contrast to CID, ETD is found to be much less sensitive to the side-chain chemistry, enabling extensive sequence information to be obtained in cases where CID fails to provide this information. These results indicate that ETD is a valuable technique for studying oxidatively modified peptides and proteins. In addition, we report a unique and very abundant product ion that is formed in the CID spectra of peptides having N-terminal cysteine sulfinic acid residues. The mechanism for this unique dissociation pathway involves a six-membered cyclic intermediate and leads to the facile loss of NH(3) and SO(2), which corresponds to a mass loss of 81 Da. While the facile nature of this dissociation pathway limits the sequence information present in CID spectra of peptides with N-terminal cysteine sulfinic acid residues, extensive sequence information for these peptides can be obtained with ETD.

Radiolytic modification and reactivity of amino acid residues serving as structural probes for protein footprinting

Hydroxyl radical-mediated protein footprinting is a convenient and sensitive technique for mapping solvent-accessible surfaces of proteins and examining the structure and dynamics of biological assemblies. In this study, the reactivities and tendencies to form easily detectable products for all 20 (common) amino acid side chains along with cystine are directly compared using various standards. Although we have previously reported on the oxidation of many of these residues, this study includes a detailed examination of the less reactive residues and better defines their usefulness in hydroxyl radical-mediated footprinting experiments. All 20 amino amides along with cystine and a few tripeptides were irradiated by gamma-rays, the products were analyzed by electrospray mass spectrometry, and rate constants of modification were measured. The reactivities of amino acid side chains were compared based on their loss of mass spectral signal normalized to the rate of loss for Phe or Pro that were radiolyzed simultaneously to serve as internal standards. In this way, accurate quantitation of relative rates could be assured. A reactivity order of amino acid side chains was obtained as Cys > Met > Trp > Tyr > Phe > cystine > His > Leu, Ile > Arg, Lys, Val > Ser, Thr, Pro > Gln, Glu > Asp, Asn > Ala > Gly. Ala and Gly are far too unreactive to be useful probes in typical experiments and Asp and Asn are unlikely to be useful as well. Although Ser and Thr are more reactive than Pro, which is known to be a useful probe, their oxidation products are not easily detectable. Thus, it appears that 14 of the 20 side chains (plus cystine) are most likely to be useful in typical experiments. Since these residues comprise approximately 65% of the sequence of a typical protein, the footprinting approach provides excellent coverage of the side-chain reactivity for proteins.

Radiolytic modification of sulfur-containing amino acid residues in model peptides: fundamental studies for protein footprinting

Protein footprinting based on hydroxyl radical-mediated modification and quantitative mass spectroscopic analysis is a proven technique for examining protein structure, protein-ligand interactions, and structural allostery upon protein complex formation. The reactive and solvent-accessible amino acid side chains function as structural probes; however, correct structural analysis depends on the identification and quantification of all the relevant oxidative modifications within the protein sequence. Sulfur-containing amino acids are oxidized readily and the mechanisms of oxidation are particularly complex, although they have been extensively investigated by EPR and other spectroscopic methods. Here we have undertaken a detailed mass spectrometry study (using electrospray ionization mass spectrometry and tandem mass spectrometry) of model peptides containing cysteine (Cys-SH), cystine (disulfide bonded Cys), and methionine after oxidation using gamma-rays or synchrotron X-rays and have compared these results to those expected from oxidation mechanisms proposed in the literature. Radiolysis of cysteine leads to cysteine sulfonic acid (+48 Da mass shift) and cystine as the major products; other minor products including cysteine sulfinic acid (+32 Da mass shift) and serine (-16 Da mass shift) are observed. Radiolysis of cystine results in the oxidative opening of the disulfide bond and generation of cysteine sulfonic acid and sulfinic acid; however, the rate of oxidation is significantly less than that for cysteine. Radiolysis of methionine gives rise primarily to methionine sulfoxide (+16 Da mass shift); this can be further oxidized to methionine sulfone (+32 Da mass shift) or another product with a -32 Da mass shift likely due to aldehyde formation at the gamma-carbon. Due to the high reactivity of sulfur-containing amino acids, the extent of oxidation is easily influenced by secondary oxidation events or the presence of redox reagents used in standard proteolytic digestions; when these are accounted for, a reactivity order of cysteine > methionine approximately tryptophan > cystine is observed.

Secondary reactions and strategies to improve quantitative protein footprinting

Hydroxyl radical-mediated footprinting permits detailed examination of structure and dynamic processes of proteins and large biological assemblies, as changes in the rate of reaction of radicals with target peptides are governed by changes in the solvent accessibility of the side-chain probe residues. The precise and accurate determination of peptide reaction rates is essential to successfully probing protein structure using footprinting. In this study, we specifically examine the magnitude and mechanisms of secondary oxidation occurring after radiolytic exposure and prior to mass spectrometric analysis. Secondary oxidation results from hydrogen peroxide and other oxidative species generated during radiolysis, significantly impacting the oxidation of Met and Cys but not aromatic or other reactive residues. Secondary oxidation of Met with formation of sulfoxide degrades data reproducibility and inflates the perceived solvent accessibility of Met-containing peptides. It can be suppressed by adding trace amounts of catalase or millimolar Met-NH2 (or Met-OH) buffer immediately after irradiation; this leads to greatly improved adherence to first-order kinetics and more precise observed oxidation rates. The strategy is shown to suppress secondary oxidation in model peptides and improve data quality in examining the reactivity of peptides within the Arp2/3 protein complex. Cysteine is also subject to secondary oxidation generating disulfide as the principal product. The disulfides can be reduced before mass spectrometric analysis by reducing agents such as TCEP, while methionine sulfoxide is refractory to reduction by this reagent under typical reducing conditions.

The effect of histidine oxidation on the dissociation patterns of peptide ions

Oxidative modifications to amino acid side chains can change the dissociation pathways of peptide ions, although these variations are most commonly observed when cysteine and methionine residues are oxidized. In this work we describe the very noticeable effect that oxidation of histidine residues can have on the dissociation patterns of peptide ions containing this residue. A common product ion spectral feature of doubly charged tryptic peptides is enhanced cleavage at the C-terminal side of histidine residues. This preferential cleavage arises as a result of the unique acid/base character of the imidazole side chain that initiates cleavage of a proximal peptide bond for ions in which the number of protons does not exceed the number of basic residues. We demonstrate here that this enhanced cleavage is eliminated when histidine is oxidized to 2-oxo-histidine because the proton affinity and nucleophilicity of the imidazole side chain are lowered. Furthermore, we find that oxidation of histidine to 2-oxo-histidine can cause the misassignment of oxidized residues when more than one oxidized isomer is simultaneously subjected to tandem mass spectrometry (MS/MS). These spectral misinterpretations can usually be avoided by using multiple stages of MS/MS (MS(n)) or by specially optimized liquid chromatographic separation conditions. When these approaches are not accessible or do not work, N-terminal derivatization with sulfobenzoic acid avoids the problem of mistakenly assigning oxidized residues.

Oxidation inhibits amyloid fibril formation of transthyretin

The role of amino acid side chain oxidation in the formation of amyloid assemblies has been investigated. Chemical oxidation of amino acid side chains has been used as a facile method of introducing mutations on protein structures. Oxidation promotes changes within tertiary contacts that enable identification of residues and interactions critical in stabilizing protein structures. Transthyretin (TTR) is a soluble human plasma protein. The wild-type (WT) and several of its variants are prone to fibril formation, which leads to amyloidosis associated with many clinical syndromes. The effects of amino acid side chain oxidations were investigated by comparing the kinetics of fibril formation of oxidized and unoxidized proteins. The WT and V30M TTR mutant (valine 30 substituted with methionine) were allowed to react over a time range of 10 min to 12 h with hydroxy radical and other reactive oxygen species. In these timescales, up to five oxygen atoms were incorporated into WT and V30M TTR proteins. Oxidized proteins retained their tetrameric structures, as determined by cross-linking experiments. Side chain modification of methionine residues at position 13 and 30 (the latter for V30M TTR only) were dominant oxidative products. Mono-oxidized and dioxidized methionine residues were identified by radical probe mass spectometry employing a footprinting type approach. Oxidation inhibited the initial rates and extent of fibril formation for both the WT and V30M TTR proteins. In the case of WT TTR, oxidation inhibited fibril growth by approximately 76%, and for the V30M TTR by nearly 90%. These inhibiting effects of oxidation on fibril growth suggest that domains neighboring the methionine residues are critical in stabilizing the tetrameric and folded monomer structures.

Visualizing Arp2/3 complex activation mediated by binding of ATP and WASp using structural mass spectrometry

Actin-related protein (Arp) 2/3 complex nucleates new branches in actin filaments playing a key role in controlling eukaryotic cell motility. This process is tightly regulated by activating factors: ATP and WASp-family proteins. However, the mechanism of activation remains largely hypothetical. We used radiolytic protein footprinting with mass spectrometry in solution to probe the effects of nucleotide- and WASp-binding on Arp2/3. These results represent two significant advances in such footprinting approaches. First, Arp2/3 is the most complex macromolecular assembly yet examined; second, only a few picomoles of Arp2/3 was required for individual experiments. In terms of structural biology of Arp 2/3, we find that ATP binding induces conformational changes within Arp2/3 complex in Arp3 (localized in peptide segments 5-18, 212-225, and 318-327) and Arp2 (within peptide segment 300-316). These data are consistent with nucleotide docking within the nucleotide clefts of the actin-related proteins promoting closure of the cleft of the Arp3 subunit. However, ATP binding does not induce conformational changes in the other Arp subunits. Arp2/3 complex binds to WASp within the C subdomain at residue Met 474 and within the A subdomain to Trp 500. Our data suggest a bivalent attachment of WASp to Arp3 (within peptides 162-191 and 318-329) and Arp2 (within peptides 66-80 and 87-97). WASp-dependent protections from oxidation within peptides 54-65 and 80-91 of Arp3 and in peptides 300-316 of Arp2 suggest domain rearrangements of Arp2 and Arp3 resulting in a closed conformational state consistent with an "actin-dimer" model for the active state.

Rapid identification of oxidation-induced conformational changes by kinetic analysis

Protein oxidation by reactive oxygen species is known to result in changes in the structure and function of the oxidized protein. Many proteins can tolerate multiple oxidation events before altering their conformation, while others suffer gross changes in conformation after a single oxidation event. Additionally, reactive oxygen species have been used in conjunction with mass spectrometry to map the accessible surface of proteins, often after verification that the oxidations do not alter the conformation. However, detection of oxidation-induced conformational changes by detailed kinetic oxidation analysis of individual proteolytic peptides or non-mass spectrometric analysis is labor-intensive and often requires significant amounts of sample. In this work, we describe a methodology to detect oxidation-induced conformational changes in proteins via direct analysis of the intact protein. The kinetics of addition of oxygen to unmodified protein are compared with the kinetics of addition of oxygen to the mono-oxidized protein. These changes in the rate of oxidation of the oxidized versus the non-oxidized protein are strongly correlated with increases in the random coil content as measured by the molar ellipticity at 198 nm. This methodology requires only small amounts of protein, and can be done rapidly without additional sample handling or derivatization.

Analysis of the oxidative damage-induced conformational changes of apo- and holocalmodulin by dose-dependent protein oxidative surface mapping

Calmodulin (CaM) is known to undergo conformational and functional changes on oxidation, allowing CaM to function as an oxidative stress sensor. We report the use of a novel mass spectrometry-based methodology to monitor the structure of apo- and holo-CaM as it undergoes conformational changes as a result of increasing amounts of oxidative damage. The kinetics of oxidation for eight peptides are followed by mass spectrometry, and 12 sites of oxidation are determined by MS/MS. Changes in the pseudo-first-order rate constant of oxidation for a peptide after increasing radiation exposure reveal changes in the accessibility of the peptide to the diffusing hydroxyl radical, indicating conformational changes as a function of increased oxidative damage. For holo-CaM, most sites rapidly become less exposed to hydroxyl radicals as the protein accumulates oxidative damage, indicating a closing of the hydrophobic pockets in the N- and C-terminal lobes. For apo-CaM, many of the sites rapidly become more exposed until they resemble the solvent accessibility of holo-CaM in the native structure and then rapidly become more buried, mimicking the conformational changes of holo-CaM. At the most heavily damaged points measured, the rates of oxidation for both apo- and holo-CaM are essentially identical, suggesting the two assume similar structures.

Using metal-catalyzed oxidation reactions and mass spectrometry to identify amino acid residues within 10 A of the metal in Cu-binding proteins

Metal-catalyzed oxidation (MCO) reactions and mass spectrometry (MS) can be used together to determine the amino acids bound to Cu in a metalloprotein. Selective oxidation of only amino acids bound to Cu during the MCO/MS approach relies on proper choice of the types and concentrations of the reducing and oxidizing agents. We show here that if these MCO reagent concentrations are "detuned" or varied slightly from optimal conditions, nonmetal-bound amino acids close to Cu can also be oxidized in a controlled manner. Using Cu/Zn superoxide dismutase as a model system, we demonstrate that amino acids up to 10 A from Cu can be modified as long as they are readily accessible to diffusing reactive oxygen species. UV/VIS spectroscopy and measurements of oxidation kinetics provide evidence that the protein's structural integrity around Cu is maintained during the detuned MCO reactions. Because this method can identify amino acids around Cu that have low solvent accessibility, it should complement other radical-based protein surface-mapping techniques.

Ions of the interactome: The role of MS in the study of protein interactions in proteomics and structural biology

The role of MS in the study of protein-protein interactions in solution is described from a proteomics perspective, in terms of high-throughput analyses of protein complexes in vivo, through to chemical and biochemical treatments ahead of MS analysis in the context of complementary experimental approaches in structural biology. The use of MS to characterise protein-protein interactions is described following the single and tandem affinity purification of protein complexes and assemblies of expressed proteins in host cells, the isolation and preservation of protein complexes on surfaces and microarrays, and their prior treatment with chemical and biochemical probes by hydrogen exchange, radical probe, chemical cross-linking, and limited proteolysis. The advantages and disadvantages of each of the approaches are presented. These new and emerging applications, which further demonstrate the power of MS, continue to ensure that the mass spectrometer will remain at the heart of discoveries in proteomics in the foreseeable future.

Interaction between alpha and upsilon-crystallin, common to the eye of the Australian platypus, by radical probe mass spectrometry

The interaction between alpha-crystallin and upsilon-crystallin, a class recently discovered in the eye of the Australian platypus, has been shown by native shift gel assay and examined by radical probe mass spectrometry in the context of the ability of alpha-crystallin to protect upsilon-crystallin from oxidation and oxidative damage through radical-based oxidative stress mechanisms. Residues 22-41, 132-148, 212-227 and 245-264 of upsilon-crystallin display the greatest protection when interacted with alpha-crystallin at a ratio of 2 : 1 observed for the complex, which is commensurate with their levels measured in the eye of the platypus. Across each domain, a delay in the onset of oxidative damage is observed as the time of exposure to radicals is increased. The results are discussed in the context of the structure of the porcine homologue of upsilon-crystallin.

Probing the Influence of X-rays on Aqueous Copper Solutions Using Time-Resolved in Situ Combined Video/X-ray Absorption Near-Edge/Ultraviolet−Visible Spectroscopy

Time-resolved in situ video monitoring and ultraviolet-visible spectroscopy in combination with X-ray absorption near-edge spectroscopy (XANES) have been used for the first time in a combined manner to study the effect of synchrotron radiation on a series of homogeneous aqueous copper solutions in a microreactor. This series included both non biologically relevant (pyridine, bipyridine, neocuproine, terpyridine, dimethylpyridine, ammonia, ethylenediamine, and 1,10-phenanthroline) and biologically relevant (histidine, glycine, and imidazole) ligands. It was found that when water is present as solvent, gas bubbles are formed under the influence of the X-ray beam. At the liquid-gas interface of these bubbles, in particular cases colloidal copper nanoparticles are formed. This reduction process was found to be influenced by the type of copper precursor salt (SO(4)(2-), NO(3)(-), and Cl(-)), the ligands surrounding the copper cation, and the redox potential of the copper complexes (ranging between +594 and -360 mV). In other words, in some cases, no reduction was encountered (e.g., ammonia in the presence of SO(4)(2-) and NO(3)(-)), whereas in other cases reduction to either Cu(+) (neocuproine with SO(4)(2-)) or Cu(0) (e.g., histidine and imidazole both with SO(4)(2-), NO(3)(-), and Cl(-)) was observed. These results illustrate the added value of video spectroscopy for the interpretation of in situ XANES studies. Not only do the results give an illustration of the parameters that are important in the redox processes that occur in biological systems, they also show the potential problems associated with studying catalytic processes in aqueous solutions by XANES spectroscopy.

RADIOLYTIC PROTEIN FOOTPRINTING WITH MASS SPECTROMETRY TO PROBE THE STRUCTURE OF MACROMOLECULAR COMPLEXES

Structural proteomics approaches using mass spectrometry are increasingly used in biology to examine the composition and structure of macromolecules. Hydroxyl radical-mediated protein footprinting using mass spectrometry has recently been developed to define structure, assembly, and conformational changes of macromolecules in solution based on measurements of reactivity of amino acid side chain groups with covalent modification reagents. Accurate measurements of side chain reactivity are achieved using quantitative liquid-chromatography-coupled mass spectrometry, whereas the side chain modification sites are identified using tandem mass spectrometry. In addition, the use of footprinting data in conjunction with computational modeling approaches is a powerful new method for testing and refining structural models of macromolecules and their complexes. In this review, we discuss the basic chemistry of hydroxyl radical reactions with peptides and proteins, highlight various approaches to map protein structure using radical oxidation methods, and describe state-of-the-art approaches to combine computational and footprinting data.

Effects of Anion Proximity in Peptide Primary Sequence on the Rate and Mechanism of Leucine Oxidation

Hydroxyl radical surface mapping is a useful tool for investigating protein structure and folding. The rate of protein side-chain oxidation by the hydroxyl radical is known to be affected primarily by the chemical reactivity of the side chain and the accessibility of the reactive site to the radical. Efforts have been made to determine the inherent rate of stable product formation of each amino acid side chain, so that the rate of oxidation of an amino acid can be used to accurately estimate the average solvent accessibility of the amino acid side chain in the folded protein. However, the effects of nearby primary sequence on peptide oxidation have not been studied. Here, we examine the amounts of various oxidation products of a small peptide consisting of one leucine and one aspartic acid separated by zero to five glycine residues, as well as with modification of the N- and C-terminus. We find that the relative amounts of certain oxidation products can be heavily influenced by the primary structure of the surrounding peptide. The formation of many products, including hydroxylation, is inhibited by proximity to negative charges, while the formation of other products showed more complicated responses to changing primary sequence.

Hydroxyl radical footprinting in vivo: mapping macromolecular structures with synchrotron radiation

We used a high flux synchrotron X-ray beam to map the structure of 16S rRNA and RNase P in viable bacteria in situ. A 300 ms exposure to the X-ray beam was sufficient for optimal cleavage of the phosphodiester backbone. The in vivo footprints of the 16S rRNA in frozen cells were similar to those obtained in vitro and were consistent with the predicted accessibility of the RNA backbone to hydroxyl radical. Protection or enhanced cleavage of certain nucleotides in vivo can be explained by interactions with tRNA and perturbation of the subunit interface. Thus, short exposures to a synchrotron X-ray beam can footprint the tertiary structure and protein contacts of RNA–protein complexes with nucleotide resolution in living cells.

PROXIMO--a new docking algorithm to model protein complexes using data from radical probe mass spectrometry (RP-MS)

The design and implementation of a new algorithm, known as PROXIMO for protein oxidation interface modeller, is described to predict the structure of protein complexes using data generated in radical probe mass spectrometry (RP-MS) experiments. Photochemical radiolysis and discharge sources can be used to effect RP-MS in which hydroxyl radicals are formed directly from the bulk solvent on millisecond timescales and react with surface accessible residues in footprinting-like experiments. The algorithm utilizes a geometric surface fitting routine to predict likely structures for protein complexes. These structures are scored based on a correlation between the measured solvent accessibility of oxidizable residue side chains and oxidation shielding data obtained by RP-MS. The algorithm has been implemented to predict structures for the ribonuclease S-protein-peptide and calmodulin-melittin complexes using RP-MS data generated in this laboratory. The former is in close agreement with the high-resolution experimental structure available.

Fast Fenton footprinting: a laboratory-based method for the time-resolved analysis of DNA, RNA and proteins

'Footprinting' describes assays in which ligand binding or structure formation protects polymers such as nucleic acids and proteins from either cleavage or modification; footprinting allows the accessibility of individual residues to be mapped in solution. Equilibrium and time-dependent footprinting links site-specific structural information with thermodynamic and kinetic transitions. The hydroxyl radical (*OH) is a particularly valuable footprinting probe by virtue of it being among the most reactive of chemical oxidants; it reports the solvent accessibility of reactive sites on macromolecules with as fine as a single residue resolution. A novel method of millisecond time-resolved .OH footprinting has been developed based on the Fenton reaction, Fe(II) + H2O2 --> Fe(III) + *OH + OH-. This method can be implemented in laboratories using widely available three-syringe quench flow mixers and inexpensive reagents to study local changes in the solvent accessibility of DNA, RNA and proteins associated with their biological function.

Transition Metal−Peptide Binding Studied by Metal-Catalyzed Oxidation Reactions and Mass Spectrometry

We have identified conditions that allow metal-catalyzed oxidation (MCO) reactions and mass spectrometry (MS) to correctly identify binding sites of first-row transition metal ions to model peptides. This work extends the applicability of the MCO/MS method to metals other than Cu(II). When the appropriate reducing agent (ascorbate, 10 mM) and oxidizing agent concentrations (1 mM persulfate, atmospheric O2, or both) are used, metal-bound amino acids can be sufficiently and specifically oxidized for clear identification by MS. The MCO reactions with Mn(II), Fe(II), Co(II), and Ni(II) occur to lesser extents than with Cu(II), but oxidation is still extensive enough to allow easy identification of the metal-bound residues. With the exception of aspartic acid, the known metal-binding amino acids of angiotensin I and bacitracin A are oxidized, while no oxidation is observed at nonbinding residues. Failure to oxidize aspartic acid is likely due to the relatively slow reactivity of its carboxylic acid side chain with reactive oxygen species, suggesting that the current MCO/MS protocol is transparent to such acidic residues. Overall, this study indicates that, just as is possible for Cu(II), the MCO/MS method should be suitable for determining the Mn(II)-, Fe(II)-, Co(II)-, and Ni(II)-binding sites of metalloproteins.

Onset of oxidative damage in alpha-crystallin by radical probe mass spectrometry

The early onset oxidative damage within segments of the protein alpha-crystallin is examined by radical probe mass spectrometry by its treatment with reactive oxygen species under low-, moderate-, and high-oxidizing conditions. Five regions comprising the first 11 residues of the N-termini of the A and B subunits (A/B:1-11), central domains from each subunit B:57-69 and A:104-112, and a C-terminal segment of the A subunit A:120-145 were found to be the initial sites of oxidation. The susceptibility of each segment to oxidation and oxidative damage is investigated by subjecting the intact protein to different oxidation conditions within the ion source of an electrospray ionization mass spectrometer. LC-MS of the oxidized protein digests enables the sites and levels of oxidation to be monitored. The onset of oxidative damage and the levels of oxidation observed before damage occurs differ across the protein surface. The regions comprising residues A/B:1-11 and A:104-112 are shown to be more susceptible to oxidative damage than those comprising residues B:57-69 and A:120-145. The results are discussed in the context of available experimental and homology-modeled theoretical structures for the subunits of alpha-crystallin.

Characterization of multimetric variants of ubiquitin carboxyl-terminal hydrolase L1 in water by small-angle neutron scattering

Here, we illustrated that the morphological structures of ubiquitin carboxyl-terminal hydrolase L1 (UCH-L1) variants and Parkinson's disease (PD) exhibit good pathological correlation by a small-angle neutron scattering (SANS). UCH-L1 is a neuro-specific multiple functional enzyme, deubiquitinating, ubiquityl ligase, and also involved in stabilization of mono-ubiquitin. To examine the relationship between multiple functions of UCH-L1 and the configuration of its variants [wild-type, I93M (linked to familial Parkinson's disease), and S18Y (linked to reduced risk of Parkinson's disease)], in this report, we proposed that these were all self-assembled dimers by an application of a rotating ellipsoidal model; the configurations of these dimers were quite different. The wild-type was a rotating ellipsoidal. The globular form of the monomeric component deformed by the I93M mutation. Conversely, the S18Y polymorphism promoted the globularity. Thus, the multiple functional balance is closely linked to the intermolecular interactions between the UCH-L1 monomer and the final dimeric configuration.

Structural proteomics of macromolecular assemblies using oxidative footprinting and mass spectrometry

Understanding the composition, structure and dynamics of macromolecules and their assemblies is at the forefront of biological science today. Hydroxyl-radical-mediated protein footprinting using mass spectrometry can define macromolecular structure, macromolecular assembly and conformational changes of macromolecules in solution based on measurements of reactivity of amino acid side-chain groups with covalent-modification reagents. Subsequent to oxidation by reactive oxygen species, proteins are digested by specific proteases to generate peptides for analysis by mass spectrometry. Accurate measurements of side-chain reactivity are achieved using quantitative liquid-chromatography-coupled mass spectrometry, whereas the side-chain sites within the macromolecular probes are identified using tandem mass spectrometry. In addition, the use of footprinting data in conjunction with computational modeling approaches is a powerful new method for testing and refining structural models of macromolecules and their complexes.

Controlling gas-phase reactions for efficient charge reduction electrospray mass spectrometry of intact proteins

Charge reduction electrospray mass spectrometry (CREMS) reduces the charge states of electrospray-generated ions, which concentrates the ions from a protein into fewer peaks spread over a larger m/z range, thereby increasing peak separation and decreasing spectral congestion. An optimized design for a CREMS source is described that provides an order-of-magnitude increase in sensitivity compared to previous designs and provides control over the extent of charge reduction. Either a corona discharge or an alpha-particle source was employed to generate anions that abstract protons from electrosprayed protein cations. These desired ion/ion proton transfer reactions predominated, but some oxidation and ion-attachment reactions also occurred, leading to new peaks or mass-shifted broader peaks while decreasing signal intensity. The species producing these deleterious side-reactions were identified, and conditions were found that prevented their formation. Spectrometer m/z biases were examined because of their effect upon the signal intensity of higher m/z charge-reduced protein ions. The utility of this atmospheric pressure CREMS was demonstrated using a cell lysate fraction from E. coli. The spectral simplification afforded by CREMS reveals more proteins than are observed without charge reduction.

Structural allostery and binding of the transferrin*receptor complex

The structural allostery and binding interface for the human serum transferrin (Tf)*transferrin receptor (TfR) complex were identified using radiolytic footprinting and mass spectrometry. We have determined previously that the transferrin C-lobe binds to the receptor helical domain. In this study we examined the binding interactions of full-length transferrin with receptor and compared these data with a model of the complex derived from cryoelectron microscopy (cryo-EM) reconstructions (Cheng, Y., Zak, O., Aisen, P., Harrison, S. C. & Walz, T. (2004) Structure of the human transferrin receptor.transferrin complex. Cell 116, 565-576). The footprinting results provide the following novel conclusions. First, we report characteristic oxidations of acidic residues in the C-lobe of native Tf and basic residues in the helical domain of TfR that were suppressed as a function of complex formation; this confirms ionic interactions between these protein segments as predicted by cryo-EM data and demonstrates a novel method for detecting ion pair interactions in the formation of macromolecular complexes. Second, the specific side-chain interactions between the C-lobe and N-lobe of transferrin and the corresponding interactions sites on the transferrin receptor predicted from cryo-EM were confirmed in solution. Last, the footprinting data revealed allosteric movements of the iron binding C- and N-lobes of Tf that sequester iron as a function of complex formation; these structural changes promote tighter binding of the metal ion and facilitate efficient ion transport during endocytosis.

Metal-catalyzed oxidation reactions and mass spectrometry: The roles of ascorbate and different oxidizing agents in determining Cu–protein-binding sites

Further study has been made of metal-catalyzed oxidation (MCO) reactions and mass spectrometry as a method to determine the binding site of copper in metalloproteins. The role of ascorbate and a variety of oxidizing agents, including O2, H2O2, and S2O8(2-), have been investigated using Cu/Zn superoxide dismutase (SOD) as a model system. Ascorbate is found to play two competing roles in the MCO reactions. It reduces Cu(II), which initiates and maintains the generation of reactive oxygen species, and it scavenges radicals, which helps to localize oxidation products to amino acids near the metal center. An ascorbate concentration of 100 mM is found to be optimal with regard to localizing oxidation products to only the Cu-binding residues (His44, His46, His61, and His118) of Cu/Zn SOD. This concentration of ascorbate is very similar to the optimum concentration found in our previous studies of different Cu-binding proteins. Another notable result from this study is the observation that S2O8(2-) is more effective as an oxidant than O2 or H2O2 in the MCO reactions. Because S2O8(2-) is more stable in solution than H2O2, using it as an oxidizing agent results in much less nonspecific oxidation to the protein. The overall results of this study suggest that general MCO reaction conditions may exist for determining the metal-binding site of a wide range of Cu-binding proteins.

Photochemical surface mapping of C14S-Sml1p for constrained computational modeling of protein structure

Photochemically generated hydroxyl radicals were used to map solvent-exposed regions in the C14S mutant of the protein Sml1p, a regulator of the ribonuclease reductase enzyme Rnr1p in Saccharomyces cerevisiae. By using high-performance mass spectrometry to characterize the oxidized peptides created by the hydroxyl radical reactions, amino acid solvent-accessibility data for native and denatured C14S Sml1p that revealed a solvent-excluding tertiary structure in the native state were obtained. The data on solvent accessibilities of various amino acids within the protein were then utilized to evaluate the de novo computational models generated by the HMMSTR/Rosetta server. The top five models initially generated by the server all disagreed with both published nuclear magnetic resonance (NMR) data and the solvent-accessibility data obtained in this study. A structural model adjusted to fit the previously reported NMR data satisfied most of the solvent-accessibility constraints. Through minor adjustment of the rotamers of two amino acid side chains for this latter structure, a model that not only provided a lower energy conformation but also completely satisfied previously reported data from NMR and tryptophan fluorescence measurements, in addition to the solvent-accessibility data presented here, was generated.