Ambient Ionization Mass Spectrometry: Recent Developments and Applications

Surface Imaging in Applied Research

Abstract

The possibilities of mass spectrometric visualization in new areas of research are considered. It is shown that surface mass spectrometry can be used to study structural materials and monitor surfaces for corrosion damage, process contamination, and damage. The possibility of studying non-metallic materials is shown for the first time. It is found that studying the low molecular weight part of polymer films helps to detect technological impurities and irreversible deformation of the film surface. It is established this can be used to authenticate handwritten documents, make corrections to them, and successfully compete with the classical means of such research.

Recent Advances in Mass Spectrometry-Based Structural Elucidation Techniques

Mass spectrometry (MS) has become the central technique that is extensively used for the analysis of molecular structures of unknown compounds in the gas phase. It manipulates the molecules by converting them into ions using various ionization sources. With high-resolution MS, accurate molecular weights (MW) of the intact molecular ions can be measured so that they can be assigned a molecular formula with high confidence. Furthermore, the application of tandem MS has enabled detailed structural characterization by breaking the intact molecular ions and protonated or deprotonated molecules into key fragment ions. This approach is not only used for the structural elucidation of small molecules (MW < 2000 Da), but also crucial biopolymers such as proteins and polypeptides; therefore, MS has been extensively used in multiomics studies for revealing the structures and functions of important biomolecules and their interactions with each other. The high sensitivity of MS has enabled the analysis of low-level analytes in complex matrices. It is also a versatile technique that can be coupled with separation techniques, including chromatography and ion mobility, and many other analytical instruments such as NMR. In this review, we aim to focus on the technical advances of MS-based structural elucidation methods over the past five years, and provide an overview of their applications in complex mixture analysis. We hope this review can be of interest for a wide range of audiences who may not have extensive experience in MS-based techniques.

Mass Spectrometry-Based Nontargeted and Targeted Analytical Approaches in Fingerprinting and Metabolomics of Food and Agricultural Research

Mass spectrometry (MS)-based techniques have been extensively applied in food and agricultural research. This review aims to address the advances and applications of MS-based analytical strategies in nontargeted and targeted analysis and summarizes the recent publications of MS-based techniques, including flow injection MS fingerprinting, chromatography-tandem MS metabolomics, direct analysis using ambient mass spectrometry, as well as development in MS data deconvolution software packages and databases for metabolomic studies. Various nontargeted and targeted approaches are employed in marker compounds identification, material adulteration detection, and the analysis of specific classes of secondary metabolites. In the newly emerged applications, the recent advances in computer tools for the fast deconvolution of MS data in targeted secondary metabolite analysis are highlighted.

Mass Spectrometry Imaging technology in metabolomics: a systematic review

Mass spectrometry imaging (MSI) is a powerful label-free analysis technique that can provide simultaneous spatial distribution of multiple compounds in a single experiment. By combining the sensitive and rapid screening of high-throughput mass spectrometry with spatial chemical information, metabolite analysis and morphological characteristics are presented in a single image. MSI can be used for qualitative and quantitative analysis of metabolic profiles and it can provide visual analysis of spatial distribution information of complex biological and microbial systems. Matrix assisted laser desorption ionization, laser ablation electrospray ionization and desorption electrospray ionization are commonly used in MSI. Here, we summarize and compare these three technologies, as well as the applications and prospects of MSI in metabolomics.

Rapid identification of bear bile powder from other bile sources using chip-based nano-electrospray ionization tandem mass spectrometry

RATIONALE

Bear bile powder (BBP) is a widely used traditional Chinese medicine (TCM), and bile acids (BAs) are the main active components in BBP. Due to the scarcity of BBP resources, adulterations often occur in the market. Conventional methods to distinguish them are usually complicated and time-consuming. To enhance effectiveness and accuracy, a rapid and rough analytical method is desperately needed.

METHODS

In this study, a rapid strategy using chip-based nano-electrospray ionization tandem mass spectrometry (nano-ESI-MS/MS) was established to distinguish BBP from other sources of bile powder (BP). In addition, the results were further verified by ultra-high-performance liquid chromatography combined with high-resolution mass spectrometry (UPLC/MS).

RESULTS

The precision of the chip-based nano-ESI-MS/MS method was validated to be acceptable with relative standard deviation (RSD) <15%. The distinction between BBP and other sources of BP, including common adulterants of pig bile powder (PBP), cattle bile powder (CBP), sheep bile powder (SBP), and chicken bile powder (CkBP), can be observed in the spectra. By using orthogonal partial least-squares discriminant analysis (OPLS-DA), more potential m/z markers were investigated. A BAs-related m/z marker of 498.3 was discovered as a typical differential molecular ion peak and was identified as tauroursodeoxycholic acid (TUDCA) and taurochenodeoxycholic acid (TCDCA) in BBP.

CONCLUSIONS

The proposed strategy has simple sample pretreatment steps and significantly shortened analysis time. As an emerging technology, chip-based nano-ESI-MS not only provides a reference for the rapid distinction of adulterated Chinese medicines, but also provides some insights into the identification of other chemicals and foods.

Comparing DESI-MSI and MALDI-MSI Mediated Spatial Metabolomics and Their Applications in Cancer Studies

Metabolic heterogeneity of cancer contributes significantly to its poor treatment outcomes and prognosis. As a result, studies continue to focus on identifying new biomarkers and metabolic vulnerabilities, both of which depend on the understanding of altered metabolism in cancer. In the recent decades, the rise of mass spectrometry imaging (MSI) enables the in situ detection of large numbers of small molecules in tissues. Therefore, researchers look to using MSI-mediated spatial metabolomics to further study the altered metabolites in cancer patients. In this review, we examined the two most commonly used spatial metabolomics techniques, MALDI-MSI and DESI-MSI, and some recent highlights of their applications in cancer studies. We also described AFADESI-MSI as a recent variation from the DESI-MSI and compare it with the two major techniques. Specifically, we discussed spatial metabolomics results in four types of heterogeneous malignancies, including breast cancer, esophageal cancer, glioblastoma and lung cancer. Multiple studies have effectively classified cancer tissue subtypes using altered metabolites information. In addition, distribution trends of key metabolites such as fatty acids, high-energy phosphate compounds, and antioxidants were identified. Therefore, while the visualization of finer distribution details requires further improvement of MSI techniques, past studies have suggested spatial metabolomics to be a promising direction to study the complexity of cancer pathophysiology.

Mass Spectrometry Imaging of Lipids in the Scent Glands of Muskrat (Ondatra zibethicus) in Different Reproductive Statuses

As a typical seasonal breeding animal, male muskrats have a pair of scent glands that can emit musky odor substances to attract females during the breeding period. The present study aimed to visualize the differences in the distribution of lipids in the scent glands of muskrats during their different reproductive statuses by imaging mass spectrometry and quantitative real-time PCR (qRT-PCR). The results revealed remarkable differences in the expression and spatial distribution of lipids detected in the scent glands of muskrats during the different reproductive statuses. In addition, the expression levels of lipid molecules PC (32:0) and LysoPC (16:0) were found to be significantly higher in the breeding season than in the non-breeding season. Moreover, the mRNA expression levels of lipid synthesis enzyme Pemt and Pla2g4b were higher in the breeding season than in the non-breeding season, and there were positive correlations between the expression intensities of lipid molecules and the expression levels of Pemt and Pla2g4b. The present study investigates the changes and distribution of the endogenous lipid in the scent glands of muskrats and elucidates that the seasonal changes in the lipid metabolism may affect the functions of the scent glands in muskrats.

Mass Spectrometry Imaging Spatial Tissue Analysis toward Personalized Medicine

Novel profiling methodologies are redefining the diagnostic capabilities and therapeutic approaches towards more precise and personalized healthcare. Complementary information can be obtained from different omic approaches in combination with the traditional macro- and microscopic analysis of the tissue, providing a more complete assessment of the disease. Mass spectrometry imaging, as a tissue typing approach, provides information on the molecular level directly measured from the tissue. Lipids, metabolites, glycans, and proteins can be used for better understanding imbalances in the DNA to RNA to protein translation, which leads to aberrant cellular behavior. Several studies have explored the capabilities of this technology to be applied to tumor subtyping, patient prognosis, and tissue profiling for intraoperative tissue evaluation. In the future, intercenter studies may provide the needed confirmation on the reproducibility, robustness, and applicability of the developed classification models for tissue characterization to assist in disease management.

Rapid Quantification of Endogenous Steroids in Human Serum Using Leidenfrost Effect-Assisted Thermal Desorption Atmospheric Pressure Photoionization Orbitrap Mass Spectrometry

Unconjugated sex steroids in human serum play a crucial role in physiological and pathological studies and are frequently considered as biomarkers in clinical diagnosis. Because of their low polarity, poor volatility, and low concentration, the rapid and highly sensitive analysis of sex steroids in real serum matrix by ambient mass spectrometry is still challenging. Here, Leidenfrost effect-assisted thermal desorption atmospheric pressure photoionization orbitrap mass spectrometry (LETD-APPI-MS) was developed and applied to quantify free sex steroids in human serum without derivatization and chromatography separation within a few minutes. The concentration of target analyte could be increased by approximately two orders during the LETD process. The limit of quantifications and detections of endogenous sex steroids in human serum were measured at the ppt level. In contrast with commonly used immunoassays in clinical laboratories, LETD-APPI-MS enables the accurate measurements of multiple free sex steroids without the interference of cross-reactions. The endogenous sex steroids of 38 female serums at four physiological stages during pregnancy were rapidly tested by LETD-APPI-MS, whose results were highly consistent with that using liquid chromatography-atmospheric pressure chemical ionization mass spectrometry (LC-APCI-MS), indicating LETD-APPI-MS has a strong clinical application potential in steroid analysis.

Rapid Screening and Quantitation of Drugs of Abuse by Both Positive and Negative Modes via Coated Blade Spray-Mass Spectrometry

Solid-phase microextraction (SPME)-direct mass spectrometry (MS) has proven to be an efficient tool for the rapid screening and quantitation of target compounds at trace levels. However, it is challenging to perform screening using both positive and negative modes in one analytical run without compromising scanning speed and detection sensitivity. To take advantage of the special geometry of a coated blade spray (CBS) blade, which consists of two flat sides coated with the same SPME coating, we developed a CBS-MS method that enables desorption and ionization to be performed in positive ionization mode on one side of a coated blade and negative ionization mode on the other side of the same blade. By simply flipping the blade 180°, MS analysis in both ionization modes on different sides can be completed in 40 s. Combining this approach with an automated Concept 96-blade-based SPME system allowed analysis for one sample in positive and negative modes to be completed in less than 1 min. The workflow was optimized by using a biocompatible polyacrylonitrile as an undercoating layer and a binder of polyacrylonitrile/hydrophilic-lipophilic balance (HLB) particles, which enabled the rapid analysis of 20 drugs of abuse in saliva samples in both positive and negative modes. The proposed method provided low limits of quantification (between 0.005 and 10 ng/mL), with calibration linear correlation coefficients ⩾ 0.9925, accuracy between 72% and 126%, and relative precision < 15% for three validation points.

High-Throughput Nano-DESI Mass Spectrometry Imaging of Biological Tissues Using an Integrated Microfluidic Probe

Nanospray desorption electrospray mass spectrometry imaging (nano-DESI MSI) enables quantitative mapping of hundreds of molecules in biological samples with minimal sample pretreatment. We have recently developed an integrated microfluidic probe (iMFP) for nano-DESI MSI. Herein, we describe an improved design of the iMFP for the high-throughput imaging of tissue sections. We increased the dimensions of the primary and spray channels and optimized the spray voltage and solvent flow rate to obtain a stable operation of the iMFP at both low and high scan rates. We observe that the sensitivity, molecular coverage, and spatial resolution obtained using the iMFP do not change to a significant extent as the scan rate increases. Using a scan rate of 0.4 mm/s, we obtained high-quality images of mouse uterine tissue sections (scan area: 3.2 mm × 2.3 mm) in only 9.5 min and of mouse brain tissue (scan area: 7.0 mm × 5.4 mm) in 21.7 min, which corresponds to a 10-15-fold improvement in the experimental throughput. We have also developed a quantitative metric for evaluating the quality of ion images obtained at different scan rates. Using this metric, we demonstrate that the quality of nano-DESI MSI data does not degrade substantially with an increase in the scan rate. The ability to image biological tissues with high throughput using iMFP-based nano-DESI MSI will substantially speed up tissue mapping efforts.

An 241Am Plasma Desorption Ionization (AmDI) Source Scavenged from Smoke Detectors for Ambient Mass Spectrometry Sampling

The development of efficient, low-cost, easy-to-use ambient ionization methods has been a major goal of modern mass spectrometry. In this Letter, we present a gas-free, voltage-free, economic, and safe desorption ionization method using the plasma generated by a radioactive element, americium-241, scavenged from smoke detectors that equip almost every household. No other energy sources, such as laser, discharge, fast-moving carrier gas, solvent droplet, ultrasound, or heat are needed. We name this new method as americium-241 desorption ionization (AmDI). AmDI is tested for the detection of more than 20 volatile and nonvolatile chemicals under different sampling conditions, and the detection limit can be in the range of tens of picograms for some analytes. Mechanistically, we provide evidence that the α particles emitted from radioactive decay ionize ambient air, and the resulting plasma further energizes and ionizes the surface analytes for mass spectrometry detection. We anticipate wide applications of AmDI in mass spectrometric sampling in the near future because of the plethora of merits.

Wooden-Tip Electrospray Mass Spectrometry Characterization of Human Hemoglobin in Whole Blood Sample for Thalassemia Screening: A Pilot Study

Traditional analytical methods for thalassemia screening are needed to process complicated and time-consuming sample pretreatment. In recent decades, ambient mass spectrometry (MS) approaches have been proven to be an effective analytical strategy for direct sample analysis. In this work, we applied ambient MS with wooden-tip electrospray ionization (WT-ESI) for the direct analysis of raw human blood samples that were pre-identified by gene detection. A total of 319 whole blood samples were investigated in this work, including 100 α-thalassemia carriers, 67 β-thalassemia carriers, and 152 control healthy samples. Only one microliter of raw blood sample was directly loaded onto the surface of the wooden tip, and then five microliters of organic solvent and a high voltage of +3.0 kV were applied onto the wooden tip to generate spray ionization. Multiply charged ions of human hemoglobin (Hb) were directly observed by WT-ESI-MS from raw blood samples. The signal ratios of Hb chains were used to characterize two main types of thalassemia (α and β types) and healthy control blood samples. Our results suggested that the ratios of charged ions to Hb chains being at +13 would be an indicator for β-thalassemia screening.

Polydopamine inner wall-coated hypodermic needle as microextraction device and electrospray emitter for the direct analysis of illicit drugs in oral fluid by ambient mass spectrometry

In this article, polydopamine inner wall-coated hypodermic needles (PDA-HNs) are evaluated as both microextraction devices and electrospray ionization (ESI) emitters for determining selected illicit drugs (methamphetamine, cocaine, and methadone) in oral fluid samples. The PDA film, located in the inner wall of the needle, allows the extraction of the analytes at alkaline pH, where their hydrophobic character is promoted. The extracted analytes are finally eluted in a methanol/formic acid mixture that also acts as ESI solution. For this purpose, a dedicated interface based on the connection of a PEEK tube with the needle hub is proposed. This assembly allows delivering the ESI solution by the infusion syringe pump of the mass spectrometer, providing an efficient ESI on the tip of the needle. The double use of the PDA-HNs as microextraction devices and ESI emitters permits the determination of the target analytes with limits of detection and precision (expressed as relative standard deviation) values better than 2.4 μg/L and 17.6%, respectively. The accuracy was evaluated by analyzing independent spiked oral fluid samples, obtaining good results.

Linking electron ionization mass spectra of organic chemicals to toxicity endpoints through machine learning and experimentation

Quantitative structure-activity relationship (QSAR) modeling has been widely used to predict the potential harm of chemicals, in which the prediction heavily relies on the accurate annotation of chemical structures. However, it is difficult to determine the accurate structure of an unknown compound in many cases, such as in complex water environments. Here, we solved the above problem by linking electron ionization mass spectra (EI-MS) of organic chemicals to toxicity endpoints through various machine learning methods. The proposed method was verified by predicting 50% growth inhibition of Tetrahymena pyriformis (T. pyriformis) and liver toxicity. The optimal model performance obtained an R² > 0.7 or balanced accuracy > 0.72 for both the training set and test set. External experimentation further verified the application potential of our proposed method in the toxicity prediction of unknown chemicals. Feature importance analysis allowed us to identify critical spectral features that were responsible for chemical-induced toxicity. Our approach has the potential for toxicity prediction in such fields that it is difficult to determine accurate chemical structures.

Electrospray ionization mass spectrometry with wooden tips: A review

Electrospray ionization (ESI) is a powerful ionization technique in mass spectrometry (MS). There has been an increasing interest for the new development of ESI technique to extend its applications. ESI-MS with wooden tips (wooden-tip ESI-MS), an ESI technique invented in 2011, enabled not only new applications but also new insights into the ESI mechanism. In this review, the technical aspects of wooden-tip ESI-MS are described, the new features of wooden-tip ESI-MS for sampling and ionization of analytes are highlighted, and the important applications of wooden-tip ESI-MS in various fields in the past 10 years, including food safety, forensic investigation, environmental analysis, biomedical analysis and protein study, are summarized. The perspectives on the further development and applications of wooden-tip ESI-MS are also discussed.

High-Throughput Screening Using a Synchronized Pulsed Self-aspiration Vacuum Electrospray Ionization Miniature Mass Spectrometer

With the advantages of rapid analysis, high sensitivity, and multicomponent identification, mass spectrometry (MS) is recognized as an appealing choice for high-throughput screening (HTS) analysis. Aiming at the small size, simple operation, and adequate performance, the development of miniature mass spectrometers has made great progress over the last 2 decades. Besides the essential analytical performance, simple operation and HTS capability are two other crucial features desired in miniature MS instruments. In this paper, an induced self-aspiration vacuum electrospray ionization source (ISA-VESI) was developed and coupled to a miniature ion trap mass spectrometer. A special timing sequence was designed to synchronize all the operation steps in each measurement, including dual-pulse sample injection, multipulse gas injection, MS analysis, and the movement of the homemade HTS platform used as the sampler. Then, the automatic high-throughput analysis of multiple samples can be accomplished with close coordination among the sample delivery, the sample introduction and ionization, and the ion trap operation. The measurement time of each ISA-VESI-MS analysis was about 7 s, with a sample consumption of less than 100 nL.

Using an insulating fiber as the sampling probe and ionization substrate for ambient ionization-mass spectrometric analysis of volatile, semi-volatile, and polar analytes

A sharp metal needle used as the ionization emitter in conventional atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) is usually required for analyte ionization through corona discharge (i.e., gas discharge). Nevertheless, we herein demonstrate that an insulating fiber (tip diameter: 10-60 µm; length: ~ 1 cm) made of glass or bamboo can function as an APCI-like ionization emitter. Although no direct electric contact is made on the fiber, the ionization of volatiles and semi-volatiles occurs when the fiber is placed close (~ 1 mm) to the inlet of the mass spectrometer. No analyte ion signals can be observed without placing the insulating fiber in front of the mass spectrometer. The generation of ion species mainly relies on the electric field provided by the mass spectrometer. Presumably, owing to the high electric field provided by the mass spectrometer, the dielectric breakdown voltages of gas molecules in the air and the fiber are overcome, leading to the ionization of analytes in gas phase. In addition, the insulating fiber can function as a holder for sample solutions. Electrospray ionization-like processes derived from polar analytes such as amino acids, peptides, and proteins can readily occur when the insulating fiber deposited with a sample droplet is placed close to the inlet of the mass spectrometer. The feasibility of using the current approach for the detection of nonpolar and polar analytes from complex fetal bovine serum samples without tedious sample pretreatment is demonstrated in this work. The main advantage of using the suggested fiber is that the fiber can be used as the sampling probe to pick up samples and placed in front of a mass spectrometer for direct MS analysis. The application of using a robust, insulating, and disposable probe to pick up samples from real samples such as onion, honey, and pork samples followed by direct MS analysis is also demonstrated.

Characterization of Spray Modes and Factors Affecting the Ionization Efficiency of Paper Spray Ionization

In this study, we systematically evaluated the factors affecting the ionization efficiency of paper spray ionization (PSI), such as electric field, solvent supply rate, and paper thickness and hydrophobicity. The observed paper spray plume was classified into three modes: single cone-jet, multi-jet, and rim-jet modes. With the increase in the spraying voltage, the spray plume appeared in order of single cone-jet, multi-jet, and rim-jet modes. The rim-jet mode exhibited the lowest standard deviation and high ionization efficiency among the three spray modes. The main parameter determining the spray mode was the charge density of the droplets generated by paper spray, which depends on the electric field and solvent supply rate. A thicker paper reduced the electric repulsion between the jets and lowered the threshold voltage to reach the rim-jet mode. Lowering the solvent supply rate caused mode transitions from the single cone-jet to the rim-jet, possibly due to the increased droplet charge density. The hydrophobic modification on a paper substrate led to a different ionization mechanism or electrostatic spray ionization at low applied voltages.

Occurrence, detection and ecotoxicity studies of selected pharmaceuticals in aqueous ecosystems- a systematic appraisal

Pharmaceutical compounds (PCs) have globally emerged as a significant group of environmental contaminants due to the constant detection of their residues in the environment. The main scope of this review is to fill the void of information on the knowledge on the African occurrence of selected PCs in environmental matrices in comparison with those outside Africa and their respective toxic actions on both aquatic and non-aquatic biota through ecotoxicity bioassays. To achieve this objective, the study focused on commonly used and detected pharmaceutical drugs (residues). Based on the conducted literature survey, Africa has the highest levels of ciprofloxacin, sulfamethoxazole, lamivudine, acetaminophen, and diclofenac while Europe has the lowest of all these PC residues in her physical environments. For ecotoxicity bioassays, the few data available are mostly on individual groups of pharmaceuticals whereas there is sparsely available data on their combined forms.

The application of mass spectrometry imaging in traditional Chinese medicine: a review

Mass spectrometry imaging is a frontier technique which connects classical mass spectrometry with ion imaging. Various types of chemicals could be visualized in their native tissues using mass spectrometry imaging. Up to now, the most commonly applied mass spectrometry imaging techniques are matrix assisted laser desorption ionization mass spectrometry imaging, desorption electrospray ionization mass spectrometry imaging and secondary ion mass spectrometry imaging. This review gives an introduction to the principles, development and applications of commonly applied mass spectrometry imaging techniques, and then illustrates the application of mass spectrometry imaging in the investigation of traditional Chinese medicine. Recently, mass spectrometry imaging has been adopted to explore the spatial distribution of endogenous metabolites in traditional Chinese medicine. Data collected from mass spectrometry imaging can be further utilized to search for marker components of traditional Chinese medicine, discover new compounds from traditional herbs, and differentiate between medicinal plants that are similar in botanical features. Moreover, mass spectrometry imaging also plays a role in revealing the pharmacological and toxicological mechanisms of traditional Chinese medicine.

Recent applications of metabolomics in plant breeding

Metabolites play a central role in maintaining organismal life and in defining crop phenotypes, such as nutritional value, fragrance, color, and stress resistance. Among the 'omes' in biology, the metabolome is the closest to the phenotype. Consequently, metabolomics has been applied to crop improvement as method for monitoring changes in chemical compositions, clarifying the mechanisms underlying cellular functions, discovering markers and diagnostics, and phenotyping for mQTL, mGWAS, and metabolite-genome predictions. In this review, 359 reports of the most recent applications of metabolomics to plant breeding-related studies were examined. In addition to the major crops, more than 160 other crops including rare medicinal plants were considered. One bottleneck associated with using metabolomics is the wide array of instruments that are used to obtain data and the ambiguity associated with metabolite identification and quantification. To further the application of metabolomics to plant breeding, the features and perspectives of the technology are discussed.

Covalent organic framework-based solid phase microextraction coupled with electrospray ionization mass spectrometry for sensitive screening and quantitative evaluation of carbamazepine and its metabolite in mice

Carbamazepine (CBZ) and its metabolite carbamazepine-10,11-epoxide (CBZEP) play vital role in the treatment of epilepsy. It is of great importance to develop a method for rapid and sensitive monitoring of CBZ and CBZEP due to their narrow therapeutic index. Herein, an imine-linked-based covalent organic framework was synthesized by using 1,3,5-tris (4-aminophenyl) benzene (TPB) and 1,3,5-triformylbenzene (TFB) (denoted as TPB-TFB-COF)，and applied as a solid-phase microextraction (SPME) probe for extracting CBZ and CBZEP. The TPB-TFB-COF showed large surface areas (371 m² g^-1), high regular porosity (1.23 nm) and extraordinary stability, which rendered it an ideal adsorbent for highly efficient enrichment of CBZ and CBZEP. Accordingly, an attractive strategy of the combination of the TPB-TFB-COF-based SPME probe and electrospray ionization mass spectrometry system (ESI/MS) was proposed for rapid screening and sensitive monitoring of CBZ and CBZEP. Under the optimized parameters, the developed method exhibited good linearity for CBZ and CBZEP in the range of 4-1000 μg L^-1 with correlation coefficient (r) no less than 0.9953, and the corresponding limits of detection (LODs) were 0.4 and 2.5 μg L^-1, respectively. Moreover, high enrichment factors (EFs, 202-351 folds) and satisfactory relative standard deviations (RSDs) of one probe (3.3-5.1%) and probe-to-probe (4.8-5.6%) were obtained. By using the proposed method, sensitive screening and quantitative evaluation of CBZ and CBZEP in mice whole blood and tissue homogenates were successfully achieved, indicating the promising applicability of the TPB-TFB-COF-SPME-AMIS as a powerful tool for drug monitoring.

Routine analysis of pesticides in foodstuffs: Emerging ambient ionization mass spectrometry as an alternative strategy to be on your radar

Pesticides residues in foodstuffs are longstanding of great concern to consumers and governments, thus reliable evaluation techniques for these residues are necessary to ensure food safety. Emerging ambient ionization mass spectrometry (AIMS), a transformative technology in the field of analytical chemistry, is becoming a promising and solid evaluation technology due to its advantages of direct, real-time and in-situ ionization on samples without complex pretreatments. To provide useful guidance on the evaluation techniques in the field of food safety, we offered a comprehensive review on the AIMS technology and introduced their novel applications for the analysis of residual pesticides in foodstuffs under different testing scenarios (i.e., quantitative, screening, imaging, high-throughput detection and rapid on-site analysis). Meanwhile, the creative combination of AIMS with high-resolution mass analyzer (e.g., orbitrap and time-of-flight) was fundamentally mentioned based on recent studies about the detection and evaluation of multi-residual pesticides between 2015 and 2021. Finally, the technical challenges and prospects associated with AIMS operation in food industry were discussed.

Simplified screening approach of anabolic steroid esters using a compact atmospheric solid analysis probe mass spectrometric system

Due to the absence of chromatographic separation, ambient ionization mass spectrometry had the potential to improve the throughput of control laboratories in the last decades and will soon be an excellent approach for on-site use as well. In this study, an atmospheric solids analysis probe (ASAP) with a single quadrupole mass analyzer has been evaluated to identify anabolic steroid esters rapidly. Sample introduction, applied scan time, and probe temperature were optimized for sensitivity. The in-source fragmentations of seventeen selected steroid esters, commonly found in illicit samples, were determined by applying different cone voltages (12, 20, 30, and 40 V). A spectral library was created for these steroid esters based on the four stages of in-source fragmentation spectra. The applicability of this method was demonstrated for the rapid identification of steroid esters in oily injection solutions, providing test results in less than 2 min.

Build, Share and Remix: 3D Printing for Speeding Up the Innovation Cycles in Ambient Ionisation Mass Spectrometry (AIMS)

Ambient ionisation mass spectrometry (AIMS) enables studying biological systems in their native state and direct high-throughput analyses. The ionisation occurs in the physical conditions of the surrounding environment. Simple spray or plasma-based AIMS devices allow the desorption and ionisation of molecules from solid, liquid and gaseous samples. 3D printing helps to implement new ideas and concepts in AIMS quickly. Here, we present examples of 3D printed AIMS sources and devices for ion transfer and manipulation. Further, we show the use of 3D printer parts for building custom AIMS sampling robots and imaging systems. Using 3D printing technology allows upgrading existing mass spectrometers with relatively low cost and effort.

Miniature mass spectrometer-based point-of-care assay for cabotegravir and rilpivirine in whole blood

HIV prevention and treatment with injectable cabotegravir and/or rilpivirine administered once every 4 to 8 weeks is an attractive alternative to daily therapy. Prescribed dosage and drug concentrations in plasma are based on patient data collected in clinical trials, but actual patients are expected to exhibit more variability in drug concentrations, which is important to quantify. Here, we demonstrate the first quantitative point-of-care assay with a miniature mass spectrometer to assess these drug concentrations in whole blood. Quantitative performance is obtained using paper spray ionization in combination with tandem mass spectrometry (MS/MS) in the clinically relevant concentration range of both drugs. Limits of quantitation (LoQs) of cabotegravir and rilpivirine are measured to be 750 ng/mL and 20 ng/mL, respectively. The assay turnaround time is < 4 min, and strong linear relationships are established between MS/MS responses and concentration, with percentage of relative standard deviations (RSDs) that are <15% at concentrations above the LoQs. The speed, portability, low power consumption, and specificity offered by the miniature instrument should make it an appropriate platform for measuring drug concentrations in a walk-in clinic using small volumes of patient blood.

Cell-Based Ambient Venturi Autosampling and Matrix-Assisted Laser Desorption Ionization Mass Spectrometric Imaging of Secretory Products

A cell-based ambient Venturi autosampling device was established for the monitoring of dynamic cell secretions in response to chemical stimulations in real time with temporal resolution on the order of a second. Detection of secretory products of cells and screening of bioactive compounds are primarily performed on an ambient autosampling probe and matrix-assisted laser desorption ionization (MALDI) mass spectrometry. It takes advantage of the Venturi effect in which the fluid flowing through an inlet capillary tube is automatically fed into a parallel array of multiple outlet capillaries. Cells are incubated inside the inlet capillary tube that is connected with either a syringe pump or liquid chromatography (LC) for the transfer of single compounds or mixtures, respectively. Secretory products were continuously pushed into the outlet capillaries and then spotted into a compressed thin film of the matrix material 9-aminoacridine for MALDI mass spectrometric imaging. In physiological pH, without the use of high voltages and without the use of chemical derivatizations, this platform can be applied to the direct assay of neurotransmitters or other secretory products released from cells in response to the stimulation of individual compounds or LC-separated eluates of natural mixtures. It provides a new way to identify bioactive compounds with a detection limit down to 0.04 fmol/pixel.

Liquid chromatography coupled to Venturi easy ambient sonic spray ionization mass spectrometry

Venturi easy ambient sonic spray ionization (V-EASI) is a soft ambient ionization (AI) source that has the advantages of being suitable to the analysis of samples in solution (differently from the majority of AI sources), performing self-pumping, voltage- and heat-free ionization, and requiring minimum or no sample preparation. Since this ionization technique has not been fully explored, the present study provides a proof of principle of the coupling of liquid chromatography to mass spectrometry (LC-MS) using V-EASI as the interface. In order to test the performance of the developed LC-V-EASI-MS system, a quantification method for bixin, a natural dye from annatto (Bixa Orellana L.), which is known to be sensitive to the high voltage applied for electrospray ionization mass spectrometry (ESI-MS) analysis, was validated according to FDA criteria and tested in real samples. The analytical method was successfully applied and met the validation criteria, providing a detectability 10 times better than methods already reported to the quantification of bixin and no matrix effect was observed. Therefore, this proof of principle contributes to the continuous development of AI sources that represents the last great technological advance in MS towards becoming a miniaturized technique able to analyze samples closer to their actual state.

Spherical Sampler Probes Enhance the Robustness of Ambient Ionization Mass Spectrometry for Rapid Drugs Screening

Ambient ionization mass spectrometry has become one of the most promising approaches for rapid and high-throughput screening of small molecules in complex biological matrices for emergency medicine, forensics, and food and agriculture applications. The simple procedures for sample collection and ionization without additional pretreatment are vital in these fields. Many efforts have been devoted to modifying various ambient ionization techniques to simplify the procedures and improve the robustness and sensitivity of the methods. Here, we demonstrate the implementation of rigid spherical sampler probes to improve the robustness of touch spray ionization mass spectrometry. The sphericity of the probes increases the stability of the cone-jet mode of electrospray, reduces the requirements for fine positioning of a sampler in the ion source, and decreases the possibility of corona discharge occurrence. The utilization of spherical sampler probes allows fast, non-invasive sampling, followed by rapid analysis for various drugs of different chemical classes in complex biological matrices, such as the whole blood or sebum collected from the skin surface. The linearity of the analytical signal response from drug concentration confirms the possibility of creating a simple semiquantitative method for small molecules monitoring using spherical sampler probes.

Introducing Nafion for In Situ Desalting and Biofluid Profiling in Spray Mass Spectrometry

We introduce Nafion into the ambient ionization technique of spray mass spectrometry to serve for in situ desalting and direct analysis of biological fluids. Nafion was coated onto the surface of the triangular spray tip as the cation exchange material. Because the sulfonic group from the Nafion membrane effectively exchanges their carried protons with inorganic salt ions (e.g., Na⁺ and K⁺), the analyte’s ionization efficiency can be significantly enhanced by reducing ion suppression. The desalting efficiency can reach 90% and the maximum tolerance of the absolute salt amount reaches 100 μmol. The mass spectral profile can also be simplified by removing the multiple adducted ion types from small-molecule drugs and metabolites ([M + Na]⁺ and [M + K]⁺), or multiply charged ions formed by proteins ([M + nNa]ⁿ⁺ and [M + nK]ⁿ⁺). Thus, the Nafion coating makes less ambiguous data interpretation collected from spray mass spectrometry for qualitative profiling or quantitative measurement of a target analyte.

Dual ambient plasma source ionization mass spectrometry for the rapid detection of trace sterols in urban water: Rapid detection of trace sterols in urban water

A direct analytical method based on dual ambient plasma ion source tandem mass spectrometry was used for the simultaneous determination of four sterols in the environment. This technology has very high sensitivity and the method detects the four sterols in methanol-water (1:3) solutions with limits of detection (LOD) and limits of quantification (LOQ) ranging from 1.2 ng/L to 6.9 ng/L and 7.6 ng/L to 10.0 ng/L, respectively. The method was also used to test water quality at three locations within the city and successfully detected all four sterols at very low concentrations. The dual plasma source tandem mass spectrometry technique is extremely simple, rapid, sensitive and highly efficient compared to other traditional methods, providing a useful screening tool for sterols in water.

Systematic Optimization of Ambient Ionization Ion Mobility Mass Spectrometry for Rapid Separation of Isomers

Current methods typically used for metabolite screening and disease diagnosis often require extensive sample preparation, which increases analysis time and associated costs. While ambient ionization techniques enable the analysis of various samples in complex matrices with little or no sample preparation in a short time (typically within a minute), their reduced selectivity, even when coupled with high-resolution mass spectrometers, limits their application in certain fields. In this study, we have optimized the coupling of paper spray (PS) and leaf spray (LS) ambient ionization techniques with a commercially available ion mobility mass spectrometer (IM-MS) and demonstrated the separation of geometric and constitutional isomers. Ambient ionization techniques allow simultaneous introduction and ionization of samples, while background noise and matrix interference from paper and leaf substrates are filtered out by IM separation, resulting in high sensitivity and selectivity of the PS-IM-MS and LS-IM-MS workflows. In addition, we introduced a novel approach to perform single-field collision cross section (CCS) measurements, which resulted in CCS values that differ by 0.15% and 0.25% from traditional stepped-field and single-field methods, respectively. In addition, we used advanced computational tools to confidently identify analyte structures by comparing CCS values from experimental IM measurements and theoretical calculations. These results suggest that the coupling of ambient ionization methods with ion mobility techniques enables rapid, sensitive, and highly selective analysis that can be used in different fields, such as agrochemical screening and disease diagnostics.

An overview of image registration for aligning mass spectrometry imaging with clinically relevant imaging modalities

•

Mass spectrometry imaging (MSI) is a powerful molecular imaging technique.

•

Integration with other imaging modalities is essential in clinical MSI.

•

Image integration is performed by image registration techniques.

•

Technical potential of image registration in MSI has not been fully exploited.

•

Roadmap proposed to improve registration accuracy.

Mass spectrometry imaging (MSI) is used in many aspects of clinical research, including pharmacokinetics, toxicology, personalised medicine, and surgical decision-making. Maximising its potential requires the spatial integration of MSI images with imaging data from existing clinical imaging modalities, such as histology and MRI. To ensure that the information is properly integrated, all contributing images must be accurately aligned. This process is called image registration and is the focus of this review. In light of the ever-increasing spatial resolution of MSI instrumentation and a diversification of multi-modal MSI studies (e.g., spatial omics, 3D-MSI), the accuracy, versatility, and precision of image registration must increase accordingly. We review the application of image registration to align MSI data with different clinically relevant ex vivo and in vivo imaging techniques. Based on this, we identify steps in the current image registration processes where there is potential for improvement. Finally, we propose a roadmap for community efforts to address these challenges in order to increase registration quality and help MSI to fully exploit its multi-modal potential.

Nanomaterial-assisted thread-based isotachophoresis with on-thread solute trapping

This research describes a nanomaterial-assisted TB-ITP setup for the clean-up, preconcentration, and trapping of alkaloids in biological fluids, followed by their on-thread DESI-MS determination.

Sensitive Quantification of MicroRNA in Blood through Multi-amplification Toehold-Mediated DNA-Strand-Displacement Paper-Spray Mass Spectrometry (TSD-PS MS)

Accurate quantification of disease-signature microRNAs (miRNAs) in biomedical samples is in high demand for clinical diagnosis but still challenging because of low miRNAs abundance and complicating interferences in the milieus. Here, we report a multi-amplification strategy for blood miRNAs analysis based on paper-spray mass spectrometry (PS MS). A toehold-mediated DNA-strand-displacement reaction (TSD) is employed to amplify the signal chain and to ensure the specificity. The signal chain is then cleaved by UV to release signal molecules for detection. Moreover, paper spray can efficiently filter out the interfering substances in blood and further enhances the detecting sensitivity. This concept is successfully demonstrated in the prototype detection of a cancer biomarker miRNA-141 in blood and serum. The proposed TSD-PS MS approach provides an efficient way for sensitive detection of oligonucleotides with low concentration in complicating milieus.

Triboionization in Discontinuous Atmospheric Pressure Inlet for a Miniature Ion Trap Mass Spectrometer

Discontinuous atmospheric pressure interface (DAPI) consisting of a pinch valve, a silicone tube, and two metal capillaries has been widely used in miniature mass spectrometry. It is interesting that clear ion signals could be observed even when the extra ionization source was turned off. In-depth analysis suggested that this new ionization phenomenon known as triboionization is based on the surface friction on the inner surface of the silicone tube during the on/off of the pinch valve. In this study, triboionization in the DAPI of a miniature ion trap mass spectrometer was investigated. It was discovered that the signal intensity depended greatly on the material and the roughness of the silicone tube used in the DAPI. By rubbing the inner surface of the silicone tube, for example, the signal intensity can increase by nearly 20 times. Two connected pinch valves were developed to study the effects of the discharge pressure, the number, and the frequency of on/off of the pinch valve on triboionization, which were verified to have a large impact on the product ions. In addition, the humidity of the inner surface of the silicone tube impacted the signal intensity of product ions and the mass spectrum patterns, where the product ions were typically protonated ions. As the humidity increases, the signal intensity of analytes with high proton affinity increases accordingly. This triboionization source, which does not require heat, light, radiation, auxiliary gas, or solution, has been preliminarily proved to have potential for surface detection after continuous enrichment.

Sample-to-analysis platform for rapid intracellular mass spectrometry from small numbers of cells

Real-time, advanced diagnostics of the biochemical state within cells remains a significant challenge for research and development, production, and application of cell-based therapies. The fundamental biochemical processes and mechanisms of action of such advanced therapies are still largely unknown, including the critical quality attributes that correlate to therapeutic function, performance, and potency and the critical process parameters that impact quality throughout cell therapy manufacturing. An integrated microfluidic platform has been developed for in-line analysis of a small number of cells via direct infusion nano-electrospray ionization mass spectrometry. Central to this platform is a microfabricated cell processing device that prepares cells from limited sample volumes removed directly from cell culture systems. The sample-to-analysis workflow overcomes the labor intensive, time-consuming, and destructive nature of existing mass spectrometry approaches for analysis of cells. By providing rapid, high-throughput analyses of the intracellular state, this platform enables untargeted discovery of critical quality attributes and their real-time, in-process monitoring.

High-Spatial Resolution Atmospheric Pressure Mass Spectrometry Imaging Using Fiber Probe Laser Ablation-Dielectric Barrier Discharge Ionization

Atmospheric pressure mass spectrometry imaging (AP-MSI) is a powerful tool in many fields; however, there are still some difficulties to achieve high spatial resolution for AP-MSI, one of them being the need for a small ablation crater. Here, a fiber probe laser ablation (FPLA) system is introduced that uses an etched optical fiber with a sharp tip (o.d. 200 nm) to deliver ablation laser pulses to a sample surface to ablate materials with high spatial resolution. The tip-to-sample distance was adjusted to ∼10 μm using a micro-actuator having a stepping motor with submicron accuracy. The laser-ablated neutrals were post-ionized using a home-built in-line dielectric barrier discharge source, which can be interfaced to any mass spectrometer with an AP interface. Using MSI on a standard sample with a striped pattern and sections of fingernails treated with the drug methyl green zinc chloride salt, a FPLA-DBDI-MSI spatial resolution of ≈5 μm was demonstrated.