Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions

Sustainable Synthesis of Nanoscale Zerovalent Iron Particles for Environmental Remediation

Nanoscale zerovalent iron (nZVI) particles represent an important material for diverse environmental applications because of their exceptional electron-donating properties, which can be exploited for applications such as reduction, catalysis, adsorption, and degradation of a broad range of pollutants. The synthesis and assembly of nZVI by using biological and natural sustainable resources is an attractive option for alleviating environmental contamination worldwide. In this Review, various green synthesis pathways for generating nZVI particles are summarized and compared with conventional chemical and physical methods. In addition to describing the latest environmentally benign methods for the synthesis of nZVI, their properties and interactions with diverse biomolecules are discussed, especially in the context of environmental remediation and catalysis. Future prospects in the field are also considered.

Nickel-Containing Ceria-Zirconia Doped with Ti and Nb. Effect of Support Composition and Preparation Method on Catalytic Activity in Methane Dry Reforming

Nickel-containing mixed ceria-zirconia oxides also doped by Nb and Ti have been prepared by a citrate route and by original solvothermal continuous flow synthesis in supercritical alcohols. Nickel was subsequently deposited by conventional insipient wetness impregnation. The oxides are comprised of ceria-zirconia solid solution with cubic fluorite phase. Negligible amounts of impurities of zirconia are observed for samples prepared by citrate route and doped by Ti. Supports prepared by supercritical synthesis are single-phased. XRD data, Raman, and UV-Vis DR (diffuse reflectance) spectroscopy suggest increasing lattice parameter and amount of oxygen vacancies in fluorite structure after Nb and Ti incorporation despite of the preparation method. These structural changes correlate with the catalytic activity in a methane dry reforming reaction. Catalysts synthesized under supercritical conditions are more active than the catalysts of the same composition prepared by the citrate route. The catalytic activity of samples doped with Ti and Nb is two times higher in terms of TOF (turnover frequency) and increased stability of these catalysts is attributed with the highest oxygen mobility being crucial for gasification of coke precursors.

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.

Carbon Transition-metal Oxide Electrodes: Understanding the Role of Surface Engineering for High Energy Density Supercapacitors

Supercapacitors store electrical energy by ion adsorption at the interface of the electrode-electrolyte (electric double layer capacitance, EDLC) or through faradaic process involving direct transfer of electrons via oxidation/reduction reactions at one electrode to the other (pseudocapacitance). The present minireview describes the recent developments and progress of carbon-transition metal oxides (C-TMO) hybrid materials that show great promise as an efficient electrode towards supercapacitors among various material types. The review describes the synthetic methods and electrode preparation techniques along with the changes in the physical and chemical properties of each component in the hybrid materials. The critical factors in deriving both EDLC and pseudocapacitance storage mechanisms are also identified in the hope of pointing to the successful hybrid design principles. For example, a robust carbon-metal oxide interaction was identified as most important in facilitating the charge transfer process and activating high energy storage mechanism, and thus methodologies to establish a strong carbon-metal oxide contact are discussed. Finally, this article concludes with suggestions for the future development of the fabrication of high-performance C-TMO hybrid supercapacitor electrodes.

Electrochemical (bio) sensors go green

Electrochemical (bio) sensors are now widely acknowledged as a sensitive detection tool for disease diagnosis as well as the detection of numerous species of pharmaceutical, clinical, industrial, food, and environmental origin. The term 'green' demonstrates the development of electrochemical (bio) sensing platforms utilizing biodegradable and sustainable materials. Development of green sensing platforms is one of the most active areas of research minimizing the use of toxic/hazardous reagents and solvent systems, thereby further reducing the production of chemical wastes in sensor fabrication. The present review includes green electrochemical (bio) sensors which are based on firstly, green sensors comprising natural and non-hazardous materials (e.g., paper/clay/zeolites/biowastes), secondly sensors based on nanomaterials synthesized by green methods and lastly sensors constituting green solvents (e.g., ionic liquids/deep eutectic solvents). Electrochemical performances of such green sensors and their benefits such as biodegradability, non-toxicity, sustainability, low-cost, sensitive surfaces, etc. Have been discussed for quantification of various target analytes. Associated challenges, possible solutions, and opportunities towards fabricating green electrochemical sensors and biosensors have been provided in the conclusion section.

Perovskite Oxides Prepared by Hydrothermal and Solvothermal Synthesis: A Review of Crystallisation, Chemistry, and Compositions

Perovskite oxides with general composition ABO₃ are a large group of inorganic materials that can contain a variety of cations from all parts of the Periodic Table and that have diverse properties of application in fields ranging from electronics, energy storage to photocatalysis. Solvothermal synthesis routes to these materials have become increasingly investigated in the past decade as a means of direct crystallisation of the solids from solution. These methods have significant advantages leading to adjustment of crystal form from the nanoscale to the micron-scale, the isolation of compositions not possible using conventional solid-state synthesis and in addition may lead to scalable processes for producing materials at moderate temperatures. These aspects are reviewed, with examples taken from the past decade's literature on the solvothermal synthesis of perovskites with a systematic survey of B-site cations, from transition metals in Groups 4-8 and main group elements in Groups 13, 14 and 15, to solid solutions and heterostructures. As well as hydrothermal reactions, the use of various solvents and solution additives are discussed and some trends identified, along with prospects for developing control and predictability in the crystallisation of complex oxide materials.

Tumor microenvironment-activatable Fe-doxorubicin preloaded amorphous CaCO3 nanoformulation triggers ferroptosis in target tumor cells

The rapid development of treatment resistance in tumors poses a technological bottleneck in clinical oncology. Ferroptosis is a form of regulated cell death with clinical translational potential, but the efficacy of ferroptosis-inducing agents is susceptible to many endogenous factors when administered alone, for which some cooperating mechanisms are urgently required. Here, we report an amorphous calcium carbonate (ACC)-based nanoassembly for tumor-targeted ferroptosis therapy, in which the totally degradable ACC substrate could synergize with the therapeutic interaction between doxorubicin (DOX) and Fe2+. The nanoplatform was simultaneously modified by dendrimers with metalloproteinase-2 (MMP-2)-sheddable PEG or targeting ligands, which offers the functional balance between circulation longevity and tumor-specific uptake. The therapeutic cargo could be released intracellularly in a self-regulated manner through acidity-triggered degradation of ACC, where DOX could amplify the ferroptosis effects of Fe2+ by producing H2O2. This nanoformulation has demonstrated potent ferroptosis efficacy and may offer clinical promise.

Mapping the redox chemistry of common solvents in solvothermal synthesis through in situ X-ray diffraction

Solvothermal technology shows great promise in "green" materials synthesis, processing, and recycling. The outcome of a specific solvothermal reaction depends strongly on the solvent properties, and the versatility of solvothermal synthesis hinges on the very large changes in solvent properties as a function of temperature and pressure. Here, six simple 3d transition metal nitrate salts (Cu(ii), Ni(ii), Co(ii), Fe(iii), Mn(ii), Cr(iii)) were dissolved in five common solvents (water, ethanol, ethylene glycol, glycerol, and 10% hydrogen peroxide solution) and heated stepwise up to 450 °C at a pressure of 250 bar using an in situ reactor while X-ray scattering data was recorded. A range of crystalline phases were observed in the form of metallic phases, metal oxides, and other ionic compounds. These data by themselves provide simple recipes for synthesis of many technologically important 3d transition metal nanomaterials. However, more generally the oxidation states of the metals in the synthesized materials can be used to map the solvent redox properties under solvothermal conditions. It is found that glycerol and ethylene glycol are strongly reducing, ethanol is moderately reducing, while water is weakly oxidizing. The behavior of the hydrogen peroxide solution is more complex including both oxidization and reduction. Furthermore, it is observed that the reducing powers of ethanol, ethylene glycol, and glycerol are enhanced with increasing temperature. The mapping of the redox properties of these common solvents provides a method for tailoring a given reaction through choice of solvent and reaction temperature. Solvothermal processes represent an environmentally benign alternative to the use of toxic reducing agents in chemical reactions, and quantification of the redox chemistry is a first step in rational materials design.

Chemical Functionalisation of 2D Materials by Batch and Continuous Hydrothermal Flow Synthesis

2D materials are single or few layered materials consisting of one or several elements with a thickness of a few nanometres. Their unique, tuneable physical and chemical properties including ease of chemical functionalisation makes this class of materials useful in a variety of technological applications. The feasibility of 2D materials strongly depends on better synthetic approaches to improve properties, increase performance, durability and reduce costs. As such, in the synthesis of nanomaterials, hydrothermal processes are widely adopted through a precursor-product synthesis route. This method includes batch or continuous flow systems, both employing water at elevated temperatures (above boiling point) and pressures to fine-tune the physical, chemical, optical and electronic properties of the nanomaterial. Both techniques yield particles with different morphology, size and surface area due to different mechanisms of particle formation. In this Minireview, we present batch and continuous hydrothermal flow synthesis of a selection of 2D derivatives (graphene, MXene and molybdenum disulfide), their chemical functionalisation as an advantageous approach in exploring properties of these materials as well as the benefits and challenges of employing these processes, and an outlook for further research.

Flow Chemistry in Contemporary Chemical Sciences: A Real Variety of Its Applications

Flow chemistry is an area of contemporary chemistry exploiting the hydrodynamic conditions of flowing liquids to provide particular environments for chemical reactions. These particular conditions of enhanced and strictly regulated transport of reagents, improved interface contacts, intensification of heat transfer, and safe operation with hazardous chemicals can be utilized in chemical synthesis, both for mechanization and automation of analytical procedures, and for the investigation of the kinetics of ultrafast reactions. Such methods are developed for more than half a century. In the field of chemical synthesis, they are used mostly in pharmaceutical chemistry for efficient syntheses of small amounts of active substances. In analytical chemistry, flow measuring systems are designed for environmental applications and industrial monitoring, as well as medical and pharmaceutical analysis, providing essential enhancement of the yield of analyses and precision of analytical determinations. The main concept of this review is to show the overlapping of development trends in the design of instrumentation and various ways of the utilization of specificity of chemical operations under flow conditions, especially for synthetic and analytical purposes, with a simultaneous presentation of the still rather limited correspondence between these two main areas of flow chemistry.

Microfluidic Generation of Nanomaterials for Biomedical Applications

As nanomaterials (NMs) possess attractive physicochemical properties that are strongly related to their specific sizes and morphologies, they are becoming one of the most desirable components in the fields of drug delivery, biosensing, bioimaging, and tissue engineering. By choosing an appropriate methodology that allows for accurate control over the reaction conditions, not only can NMs with high quality and rapid production rate be generated, but also designing composite and efficient products for therapy and diagnosis in nanomedicine can be realized. Recent evidence implies that microfluidic technology offers a promising platform for the synthesis of NMs by easy manipulation of fluids in microscale channels. In this Review, a comprehensive set of developments in the field of microfluidics for generating two main classes of NMs, including nanoparticles and nanofibers, and their various potentials in biomedical applications are summarized. Furthermore, the major challenges in this area and opinions on its future developments are proposed.

Continuous syntheses of carbon-supported Pd and Pd@Pt core-shell nanoparticles using a flow-type single-mode microwave reactor

Continuous syntheses of carbon-supported Pd@Pt core–shell nanoparticles were performed using microwave-assisted flow reaction in polyol to synthesize carbon-supported core Pd with subsequent direct coating of a Pt shell. By optimizing the amount of NaOH, almost all Pt precursors contributed to shell formation without specific chemicals.

Continuous syntheses of carbon-supported Pd@Pt core–shell nanoparticles were performed using flow processes including microwave-assisted Pd core–nanoparticle formation.

Bifunctionally active nanosized spinel cobalt nickel sulfides for sustainable secondary zinc–air batteries: examining the effects of compositional tuning on OER and ORR activity

Nanosized cobalt nickel sulfides were prepared via a continuous hydrothermal method and evaluated as electrocatalysts, with the catalytic activity being linked to the cationic composition.

Inorganic nanoparticle synthesis in flow reactors – applications and future directions

The use of flow technologies for obtaining nanoparticles can play an important role in the development of ecological and sustainable processes for obtaining inorganic nanomaterials, and the continuous methods are part of the Flow Chemistry trend.

Ammonia-controlled synthesis of monodispersed N-doped carbon nanoparticles

The presence of ammonia slowing down the acid-catalysed Schiff base formation as well as control the monodispersity through the separation of nucleation and growth stages.

A novel synthesis of YVO4:Ln3+ (Ln = Eu, Sm, and Dy) porous/hollow submicro-ellipsoids and their luminescence properties

A novel synthesis strategy of porous/hollow YVO₄ submicro-ellipsoids with multicolor emissions has been developed based on the high structural matching of LYH and YVO₄.

Enhancing bifunctional catalytic activity of cobalt–nickel sulfide spinel nanocatalysts through transition metal doping and its application in secondary zinc–air batteries

Transition metal-doped cobalt–nickel sulfide spinel (Ni_1.29Co_1.49Mn_0.22S₄) nanocatalysts for secondary Zn–air batteries with an efficient and stable electrochemical performance.

ZnO thin film-nanowire array homo-structures with tunable photoluminescence and optical band gap

The growth and optical behavior of ZnO thin film-nanowire array homo-structures is reported. The ZnO films are deposited on glass substrates by thermal evaporation and subjected to heat treatment at 400 °C for 2 h to achieve crystallinity and stoichiometry. The surface comprises spherical grains or elongated flakes depending on thickness of films. These films are introduced in to a hydrothermal reactor in a medium of zinc acetate and HMTA to realize the nanostructures. The process results in the formation of ZnO nanowires with dimensions that are strongly dependent on the surface microstructure of the ZnO films. The role of temperature (90–180 °C) and duration (10 min to 10 h) of hydrothermal processing is investigated in detail. It is demonstrated that low temperature and short duration are ideal for producing nanowires with diameter < 100 nm, while longer durations and higher temperatures lead to large diameter and long length nanowires. Interestingly, all wires converge to a hexagonal shape with increase in duration or temperature. The lowest diameter of the vertically aligned nanowires is 50 nm and length upto 10 μm is achieved. Optical band gap of the homo-structures is of the order of 3.4–3.5 eV. Raman and photoluminescence spectra indicate the presence of defects in the films. The thin films exhibit a strong defect related photoluminescence peak centred around 550 nm. The nanowires grown on the films display both the UV-near band edge peak as well as the defect related peak. However, the intensity of the defect peak decreases with increase in length of the nanowires indicating that the photoluminescence of the homo-structures can be tuned by changing the surface microstructure of the films and also the aspect ratio of the nanowires.

ZnO homo-structures with tunable photoluminescence and band gap.

New perspective of a nano-metal preparation pathway based on the hexahydro-closo-hexaborate anion

Today, metal-based nanomaterials play an increasingly important role in the energy, environment, medical and health fields. In order to meet the needs of various fields, it is necessary to continuously develop advanced technologies for preparing metal-based materials. Inspired by previous research, the results of a proof-of-concept experiment show that the hexahydro-closo-hexaborate anion (closo-[B₆H₇]⁻) in the borane cluster family has properties similar to NaBH₄. Closo-[B₆H₇]⁻ can not only convert common precious metal ions such as Au³⁺, Pd²⁺, Pt⁴⁺ and Ag⁺ to the corresponding zero-valence state, but also convert some non-precious metals such as Cu²⁺ and Ni²⁺ to the zero-valent or oxidation state. Closo-[B₆H₇]⁻ moderate reduction to cause rapid aggregation of metal-based materials is not easy compared with NaBH₄. Compared with closo-[B₁2H₁₂]²⁻, closo-[B₆H₇]⁻ achieves the conversion of Pt⁴⁺ to Pt⁰ under ambient conditions, and its reduction performance extends to non-precious metals. The excellent stability and easy modification characteristics determine the universality of the closo-[B₆H₇]⁻ reduction strategy for metal ions.

Today, metal-based nanomaterials play an increasingly important role in the energy, environment, medical and health fields.

Development and Assessment of Nano-Technologies for Cancer Treatment: Cytotoxicity and Hyperthermia Laboratory Studies

Cancer treatment by magnetic hyperthermia offers numerous advantages, but for practical applications many variables still need to be adjusted before developing a controlled and reproducible cancer treatment that is bio-compatible (non-damaging) to healthy cells. In this work, Fe₃O₄ and CoFe₂O₄ were synthesized and systematically studied for the development of efficient therapeutic agents for applications in hyperthermia. The biocompatibility of the materials was further evaluated using HepG2 cells as biological model. Colorimetric and microscopic techniques were used to evaluate the interaction of magnetic nano-materials (MNMs) and HepG2 cells. Finally, the behavior of MNMs was evaluated under the influence of an alternating magnetic field (AMF), observing a more efficient temperature increment for CoFe₂O₄, a desirable behavior for biomedical applications since lower doses and shorter expositions to alternating magnetic field might be required.

Greener synthesis of chemical compounds and materials

Modern trends in the greener synthesis and fabrication of inorganic, organic and coordination compounds, materials, nanomaterials, hybrids and nanocomposites are discussed. Green chemistry deals with synthesis procedures according to its classic 12 principles, contributing to the sustainability of chemical processes, energy savings, lesser toxicity of reagents and final products, lesser damage to the environment and human health, decreasing the risk of global overheating, and more rational use of natural resources and agricultural wastes. Greener techniques have been applied to synthesize both well-known chemical compounds by more sustainable routes and completely new materials. A range of nanosized materials and composites can be produced by greener routes, including nanoparticles of metals, non-metals, their oxides and salts, aerogels or quantum dots. At the same time, such classic materials as cement, ceramics, adsorbents, polymers, bioplastics and biocomposites can be improved or obtained by cleaner processes. Several non-contaminating physical methods, such as microwave heating, ultrasound-assisted and hydrothermal processes or ball milling, frequently in combination with the use of natural precursors, are of major importance in the greener synthesis, as well as solventless and biosynthesis techniques. Non-hazardous solvents including ionic liquids, use of plant extracts, fungi, yeasts, bacteria and viruses are also discussed in relation with materials fabrication. Availability, necessity and profitability of scaling up green processes are discussed.

Microwave-Assisted Synthesis of Ultrasmall Zinc Oxide Nanoparticles

We report on ultrasmall zinc oxide single-crystalline nanoparticles of narrow size distribution and long-term colloidal stability. These oleate-stabilized nanoparticles were synthesized using microwave-assisted synthesis for 5 min, corresponding to a 99% decrease in synthesis time, when compared to the conventional synthesis method. It was observed that the average particle radius increases from 2.6 ± 0.1 to 3.8 ± 0.1 nm upon increasing synthesis temperature from 125 to 200 °C. This change also corresponded to observed changes in the optical band gap and the fluorescence energy of the particles, from 3.44 ± 0.01 to 3.36 ± 0.01 eV and from 2.20 ± 0.01 to 2.04 ± 0.01 eV, respectively. Small-angle X-ray scattering, dynamic light scattering, and UV-vis and fluorescence spectroscopy were employed for particle characterization. Debye-Scherrer analysis of the X-ray diffraction (XRD) pattern reveals a linear increase of the crystallite size with synthesis temperature. The consideration of the convolution of a Lorentz function with a Gaussian function for data correction of the instrumental peak broadening has a considerable influence on the values for the crystallite size. Williamson-Hall XRD analyses in the form of the uniform deformation model, uniform stress deformation model, and uniform deformation energy density model revealed a substantial increase of strain, stress, and deformation energy density of the crystallites with decreasing size. Exponential and power law models were utilized for quantification of strain, stress, and deformation energy density.

Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)3:Eu3+ nanoparticles for white light generation

Phosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)₃:Eu³⁺ particles (as red phosphor) were synthesized in water at ambient conditions in ≤60 min reaction time. The doping ratio was controlled from 2.5-20 mol %. Additionally, first principle calculations were performed on Y(OH)₃:Eu³⁺ to understand the preferable doping scenario and its optoelectronic properties. As an application, these fabricated red phosphors were integrated into a PDMS/YAG:Ce³⁺ composite and used to generate white light. The resulting white light showed a remarkable improvement (≈24%) in terms of luminous efficiency, a slight reduction of CCT (from 3900 to 3600 K), and an unchanged CRI (≈60) as the amount of Y(OH)₃:Eu³⁺ was increased.

Controlled Coprecipitation of Amorphous Cerium-Based Carbonates with Suitable Morphology as Precursors of Ceramic Electrolytes for IT-SOFCs

To be suitable as electrolytes in intermediate temperature solid oxide fuel cell (IT-SOFC), ceramic precursors have to be characterized by high sintering aptitude for producing fully densified products which are needed for this kind of application. Therefore, synthesis processes able to prepare highly reactive powders with low costs are noteworthy to be highlighted. It has been shown that amorphous coprecipitates based on cerium doped (and codoped) hydrated hydroxycarbonates can lead to synthesized ceramics with such desired characteristics. These materials can be prepared by adopting a simple coprecipitation technique using ammonium carbonate as precipitating agent. As a function of both the molar ratio between carbonate anions and total metallic cations, and the adopted mixing speed, the coprecipitate can be either amorphous, owning a very good morphology, or crystalline, owning worse morphology, packing aptitude, and sinterability. The amorphous powders, upon a mild calcination step, gave rise to the formation of stable solid solutions of fluorite-structured ceria maintaining the same morphology of the starting powders. Such calcined powders are excellent precursors for sintering ceramic electrolytes at low temperatures and with very high electrical conductivity in the intermediate temperature range (i.e., 500–700 °C). Therefore, irrespective of the actual composition of ceria-based systems, by providing an accurate control of both chemical conditions and physical parameters, the coprecipitation in the presence of ammonium carbonate can be considered as one of the most promising synthesis route in terms of cost/effectiveness to prepare excellent ceramic precursors for the next generation of IT-SOFC solid electrolytes.

3D flower-like binary nickel cobalt oxide decorated coiled carbon nanotubes directly grown on nickel nanocones and binder-free hydrothermal carbons for advanced asymmetric supercapacitors

The development of high performance supercapacitors with high energy densities without sacrificing power densities has always been at the leading edge of the emerging field of renewable energy. Herein, the design and fabrication of innovative high performance binder-free electrodes consisting of coiled carbon nanotubes (CNTs) and biomass-derived hydrothermal carbon spheres (HTCSs) as, respectively, positive and negative electrodes is reported. High performance asymmetric supercapacitors (ASCs) were developed using novel 3D core/shell-like binary Ni-Co oxide (NCO) decorated coiled CNTs directly grown on Ni nano-cone arrays (NCAs) and HTCSs directly deposited on NCAs. Novel 3D structures of NCAs were synthesized via a facile and scalable cathodic electrodeposition route and coiled CNTs were directly grown on them by catalytic chemical vapour deposition (CVD) followed by a facile hydrothermal method to integrally decorate the coiled CNTs/NCAs by 3D flower-like NCO. A one-pot hydrothermal method is also used to direct the synthesis of biomass-derived HTCSs on NCAs to fabricate a novel binder-free negative electrode. The ASC based on NCO@coiled CNTs/NCAs//HTCSs/NCAs not only exhibits superior energy density (72.5 W h kg-1) at a reasonable power density of 1.4 kW kg-1, but also represents remarkable cycling durability (retaining almost over 85% of its initial capacitance after 5000 charge-discharge cycles). The fabricated ASC, therefore, seems to be a potent candidate for practical applications in future high performance energy storage systems.

Macromolecules with programmable shape, size, and chemistry

Shape, size, and composition are the most fundamental design features, enabling highly complex functionalities. Despite recent advances, the independent control of shape, size, and chemistry of macromolecules remains a synthetic challenge. We report a scalable methodology to produce large, well-defined macromolecules with programmable shape, size, and chemistry that combines reactor engineering principles and controlled polymerizations. Specifically, bottlebrush polymers with conical, ellipsoidal, and concave architectures are synthesized using two orthogonal polymerizations. The chemical versatility is highlighted by the synthesis of a compositional asymmetric cone. The strong agreement between predictions and experiments validates the precision that this methodology offers.

Tailoring the electrochemical activity of magnesium chromium oxide towards Mg batteries through control of size and crystal structure

Chromium oxides with the spinel structure have been predicted to be promising high voltage cathode materials in magnesium batteries. Perennial challenges involving the mobility of Mg2+ and reaction kinetics can be circumvented by nano-sizing the materials in order to reduce diffusion distances, and by using elevated temperatures to overcome activation energy barriers. Herein, ordered 7 nm crystals of spinel-type MgCr2O4 were synthesized by a conventional batch hydrothermal method. In comparison, the relatively underexplored Continuous Hydrothermal Flow Synthesis (CHFS) method was used to make highly defective sub-5 nm MgCr2O4 crystals. When these materials were made into electrodes, they were shown to possess markedly different electrochemical behavior in a Mg2+ ionic liquid electrolyte, at moderate temperature (110 °C). The anodic activity of the ordered nanocrystals was attributed to surface reactions, most likely involving the electrolyte. In contrast, evidence was gathered regarding the reversible bulk deintercalation of Mg2+ from the nanocrystals made by CHFS. This work highlights the impact on electrochemical behavior of a precise control of size and crystal structure of MgCr2O4. It advances the understanding and design of new cathode materials for Mg-based batteries.

Formation dynamics of mesocrystals composed of organically modified CeO2 nanoparticles: analogy to a particle formation model

Mesocrystals, non-classical crystalline nanostructured materials composed of aligned nanoparticles, present analogous behavior to ordinary particle formation.

Electrochemical glucose sensing characteristics of two-dimensional faceted and non-faceted CuO nanoribbons

We present faceted and non-faceted crystal cupric oxide (CuO) nanoribbons synthesized by different processes for glucose-sensing applications.

Impact of cation redox chemistry on continuous hydrothermal synthesis of 2D-Ni(Co/Fe) hydroxides

We challenge the transition from brucite-like to hydrotalcite-like phases for NiCo and NiFe hydroxides via continuous hydrothermal flow synthesis.

Chemistry in supercritical fluids for the synthesis of metal nanomaterials

The supercritical flow synthesis of metal nanomaterials is sustainable and scalable for the efficient production of materials.