Long-Lived Emissive Probes for Time-Resolved Photoluminescence Bioimaging and Biosensing

Two-Dimensional Hybrid Perovskitoid Micro/nanosheets: Colorful Ultralong Phosphorescence, Delayed Fluorescence, and Anisotropic Optical Waveguide

Molecular persistent luminescence, such as room-temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF), have attracted broad attention in the fields of biological imaging, information security, and optoelectronic devices. However, the development of molecular micro/nanostructures combining both RTP and TADF properties is still in an early stage. Herein, a new type of organic metal hybrid perovskitoid (OMHP) two-dimensional (2D) microcrystal has been fabricated through a facile solution method. The long-lived TADF-RTP dual emission can be highly tuned by changing the excitation wavelength, temperature, and decayed time. Moreover, the 2D OMHP microsheet exhibits an asymmetric and anisotropic optical waveguide with low optical loss coefficient, together with extremely high linearly polarized fluorescence-phosphorescence emission (anisotropy = 0.96), which is promising for the development of polarization-sensitive luminescent materials. Therefore, this work not only demonstrates new OMHP showing colorful persistent luminescence under different modes (such as excitation wavelength, temperature, polarization, lifetime, and dimension) but also takes advantage of the 2D micro/nanostructure to provide potential applications as optical logic gates and for delicate multiple information encryption.

Elucidating the path to Plasmodium prolyl-tRNA synthetase inhibitors that overcome halofuginone resistance

The development of next-generation antimalarials that are efficacious against the human liver and asexual blood stages is recognized as one of the world's most pressing public health challenges. In recent years, aminoacyl-tRNA synthetases, including prolyl-tRNA synthetase, have emerged as attractive targets for malaria chemotherapy. We describe the development of a single-step biochemical assay for Plasmodium and human prolyl-tRNA synthetases that overcomes critical limitations of existing technologies and enables quantitative inhibitor profiling with high sensitivity and flexibility. Supported by this assay platform and co-crystal structures of representative inhibitor-target complexes, we develop a set of high-affinity prolyl-tRNA synthetase inhibitors, including previously elusive aminoacyl-tRNA synthetase triple-site ligands that simultaneously engage all three substrate-binding pockets. Several compounds exhibit potent dual-stage activity against Plasmodium parasites and display good cellular host selectivity. Our data inform the inhibitor requirements to overcome existing resistance mechanisms and establish a path for rational development of prolyl-tRNA synthetase-targeted anti-malarial therapies.

Fluorene-decorated Ir(III) complexes: synthesis, photophysics and tunable triplet excited state properties in aggregation

Two new heteroleptic cationic Ir(III) complexes bearing benzothiazole and pyridine motifs on fluorene groups were synthesized and characterized. Complexes Ir1 and Ir2 exhibit ¹π,π* transitions below 430 nm, with broad but weak metal-to-ligand and ligand-to-ligand charge transfer absorption bands above 430 nm. Both complexes possess long-lived emissions (τ_em = 0.37 μs for Ir1, τ_em = 5.41 μs for Ir2) and triplet excited states (τ_TA = 0.14 μs for Ir1, τ_TA = 6.06 μs for Ir2). Their optical properties in solution and aggregated states were also investigated. Both Ir(III) complexes exhibit aggregation-induced phosphorescence emission behavior in an acetonitrile-water mixture. As the water content increased to 90%, the emission intensities of complexes Ir1 and Ir2 increased nearly 3 times and 2.8 times, respectively. Moreover, nonlinear transmittance experiments were performed in CH₃CN and a CH₃CN-H₂O mixture (f_w = 90%), and the strength of the reverse saturable absorption (RSA) at 532 nm followed the trend: Ir2 (CH₃CN) ≥ Ir1 (CH₃CN) > Ir2 (CH₃CN-H₂O) > Ir1 (CH₃CN-H₂O). Abundant triplet state excitons participated in the radiative transition progress, which inhibited the RSA process. These results indicate that the fluorene-decorated Ir(III) complexes are suitable for aggregation emission and optical power limiting applications.

All-Visible (>500 nm)-Light-Induced Diarylethene Photochromism Based on Multiplicity Conversion via Intramolecular Energy Transfer

Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-¹[PBI]* → ³[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.

Upconversion Nanostructures Applied in Theranostic Systems

Upconversion (UC) nanostructures, which can upconvert near-infrared (NIR) light with low energy to visible or UV light with higher energy, are investigated for theranostic applications. The surface of lanthanide (Ln)-doped UC nanostructures can be modified with different functional groups and bioconjugated with biomolecules for therapeutic systems. On the other hand, organic molecular-based UC nanostructures, by using the triplet-triplet annihilation (TTA) UC mechanism, have high UC quantum yields and do not require high excitation power. In this review, the major UC mechanisms in different nanostructures have been introduced, including the Ln-doped UC mechanism and the TTA UC mechanism. The design and fabrication of Ln-doped UC nanostructures and TTA UC-based UC nanostructures for theranostic applications have been reviewed and discussed. In addition, the current progress in the application of UC nanostructures for diagnosis and therapy has been summarized, including tumor-targeted bioimaging and chemotherapy, image-guided diagnosis and phototherapy, NIR-triggered controlled drug releasing and bioimaging. We also provide insight into the development of emerging UC nanostructures in the field of theranostics.

Phosphorescent Ir(III) Complexes for Biolabeling and Biosensing

Cyclometalated Ir(III) complexes exhibit strong phosphorescence emission with lifetime of submicroseconds to several microseconds at room temperature. Their synthetic versatility enables broad control of physical properties, such as charge and lipophilicity, as well as emission colors. These favorable properties have motivated the use of Ir(III) complexes in luminescent bioimaging applications. This review examines the recent progress in the development of phosphorescent biolabels and sensors based on Ir(III) complexes. It begins with a brief introduction about the basic principles of the syntheses and photophysical processes of cyclometalated Ir(III) complexes. Focus is placed on illustrating the broad imaging utility of Ir(III) complexes. Phosphorescent labels illuminating intracellular organelles, including mitochondria, lysosomes, and cell membranes, are summarized. Ir(III) complexes capable of visualization of tumor spheroids and parasites are also introduced. Facile chemical modification of the cyclometalating ligands endows the Ir(III) complexes with strong sensing ability. Sensors of temperature, pH, CO₂, metal ions, anions, biosulfur species, reactive oxygen species, peptides, and viscosity have recently been added to the molecular imaging tools. This diverse utility demonstrates the potential of phosphorescent Ir(III) complexes toward bioimaging applications.

Luminescent and Photofunctional Transition Metal Complexes: From Molecular Design to Diagnostic and Therapeutic Applications

There has been emerging interest in the exploitation of the photophysical and photochemical properties of transition metal complexes for diagnostic and therapeutic applications. In this Perspective, we highlight the major recent advances in the development of luminescent and photofunctional transition metal complexes, in particular, those of rhenium(I), ruthenium(II), osmium(II), iridium(III), and platinum(II), as bioimaging reagents and phototherapeutic agents, with a focus on the molecular design strategies that harness and modulate the interesting photophysical and photochemical behavior of the complexes. We also discuss the current challenges and future outlook of transition metal complexes for both fundamental research and clinical applications.

Thin Films of Lanthanide Stearates as Modifiers of the Q-Sense Device Sensor for Studying Insulin Adsorption

This article presents new possibilities of using thin films of lanthanide stearates as sorbent materials. Modification of the Q-sense device resonator with monolayers of lanthanide stearates by the Langmuir-Schaeffer method made it possible to study the process of insulin protein adsorption on the surface of new thin-film sorbents. The resulting films were also characterized by compression isotherms, chemical analysis, scanning electron microscopy, and mass spectrometry. The transition of stearic acid to salt was recorded by IR spectroscopy. Using the LDI MS method, the main component of thin films, lanthanide distearate, was established. The presence of Eu²⁺ in thin films was revealed. In the case of europium stearate, the maximum value of insulin adsorption was obtained, -1.67·10^-10 mole/cm². The findings suggest the possibility of using thin films of lanthanide stearates as a sorption material for the proteomics determination of the quantitative protein content in complex fluid systems by specific adsorption on modified surfaces and isolation of such proteins from complex mixtures.

A Computational-Experimental Approach to Unravel the Excited State Landscape in Heavy-Atom Free BODIPY-Related Dyes

We performed a time-gated laser-spectroscopy study in a set of heavy-atom free single BODIPY fluorophores, supported by accurate, excited-state computational simulations of the key low-lying excited states in these chromophores. Despite the strong fluorescence of these emitters, we observed a significant fraction of time-delayed (microseconds scale) emission associated with processes that involved passage through the triplet manifold. The accuracy of the predictions of the energy arrangement and electronic nature of the low-lying singlet and triplet excited states meant that an unambiguous assignment of the main deactivation pathways, including thermally activated delayed fluorescence and/or room temperature phosphorescence, was possible. The observation of triplet state formation indicates a breakthrough in the "classic" interpretation of the photophysical properties of the renowned BODIPY and its derivatives.

Microsecond-resolved smartphone time-gated luminescence spectroscopy

Time-gated luminescence spectra are usually measured by laboratory instruments equipped with high-speed excitation sources and spectrometers, which are always bulky and expensive. To reduce the reliance on expensive laboratory instruments, we demonstrate the first, to the best of our knowledge, use of a smartphone for the detection of time-gated luminescence spectra. A mechanical chopper is used as the detection shutter and an optical switch is placed at the edge of the wheel to convert the chopping signal into a transistor-transistor logic (TTL) signal which is used to control the excitation source and achieve synchronization. The time-gated luminescence spectra at different delay times of Eu(TTA)₃ powder and the solutions of Eu-tetracycline complex are successfully detected with a temporal resolution of tens of microseconds by the proposed approach. We believe our approach offers a route toward portable instruments for the measurement of luminescence spectra and lifetimes.

Time-Resolved Luminescent Sensing and Imaging for Enzyme Catalytic Activity Based on Responsive Probes

Enzymes, as a kind of biomacromolecules, play an important role in many physiological processes and relate directly to various diseases. Developing an efficient detection method for enzyme activity is important to achieve early diagnosis of enzyme-relevant diseases and high throughput screening of potential enzyme-relevant drugs. Time-resolved luminescence assay provide a high accuracy and signal-to-noise ratios detection methods for enzyme activity, which has been widely used in high throughput screening of enzyme-relevant drugs and diagnosis of enzyme-relevant diseases. Inspired by these advantages, various responsive probes based on metal complexes and metal-free organic compounds have been developed for time-resolved bioimaging and biosensing of enzyme activity owing to their long luminescence lifetimes, high quantum yields and photostability. In this review, we comprehensively reviewed metal complex- and metal-free organic compound-based responsive probes applied to detect enzyme activity through time-resolved imaging, including their design strategies and sensing principles. Current challenges and future prospects in this rapidly growing field are also discussed.

Photo-thermo-induced room-temperature phosphorescence through solid-state molecular motion

The development of smart-responsive materials, in particular those with non-invasive, rapid responsive phosphorescence, is highly desirable but has rarely been described. Herein, we designed and prepared a series of molecular rotors containing a triazine core and three bromobiphenyl units: o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ. The bromine and triazine moieties serve as room temperature phosphorescence-active units, and the bromobiphenyl units serve as rotors to drive intramolecular rotation. When irradiated with strong ultraviolet photoirradiation, intramolecular rotations of o-Br-TRZ, m-Br-TRZ, and p-Br-TRZ increase, successively resulting in a photothermal effect via molecular motions. Impressively, the photothermal temperature attained by p-Br-TRZ is as high as 102 °C, and synchronously triggers its phosphorescence due to the ordered molecular arrangement after molecular motion. The thermal effect is expected to be important for triggering efficient phosphorescence, and the photon input for providing a precise and non-invasive stimulus. Such sequential photo-thermo-phosphorescence conversion is anticipated to unlock a new stimulus-responsive phosphorescence material without chemicals invasion.

The development of non-invasive, rapid responsive phosphorescence is highly desirable but has rarely been described. Herein, the authors designed and prepare a series of molecular rotors containing a room temperature phosphorescence active triazine core and three bromobiphenyl units acting as rotors and demonstrate light stimulus triggered phosphorescence.

Enhanced Blue Afterglow through Molecular Fusion for Bio-applications

Afterglow materials have drawn considerable attention due to their attractive luminescent properties. However, their low-efficiency luminescence in aqueous environment limits their applications in life sciences. Here, we developed a molecular fusion strategy to improve the afterglow efficiency of photochemical afterglow materials. By fusing a cache unit with an emitter, we obtained a blue afterglow system with a quantum yield up to 2.59 %. This is 162 times higher than that achieved with the traditional physical mixing system and more than an order of magnitude larger than that of the covalent coupling system. High-efficiency afterglow nanoparticles were obtained and utilized for bio-imaging with a high signal-to-noise ratio (SNR) of 131, and for the lateral flow immunoassay (LFIA) of β-hCG with a low limit of detection (LOD) of 0.34 mIU mL^-1 . This paves a new way for the construction of high-efficiency afterglow materials and expands the number of luminescence reporter candidates for disease diagnosis and bio-imaging.

Dual-Mode Tumor Imaging Using Probes That Are Responsive to Hypoxia-Induced Pathological Conditions

Hypoxia in solid tumors is associated with poor prognosis, increased aggressiveness, and strong resistance to therapeutics, making accurate monitoring of hypoxia important. Several imaging modalities have been used to study hypoxia, but each modality has inherent limitations. The use of a second modality can compensate for the limitations and validate the results of any single imaging modality. In this review, we describe dual-mode imaging systems for the detection of hypoxia that have been reported since the start of the 21st century. First, we provide a brief overview of the hallmarks of hypoxia used for imaging and the imaging modalities used to detect hypoxia, including optical imaging, ultrasound imaging, photoacoustic imaging, single-photon emission tomography, X-ray computed tomography, positron emission tomography, Cerenkov radiation energy transfer imaging, magnetic resonance imaging, electron paramagnetic resonance imaging, magnetic particle imaging, and surface-enhanced Raman spectroscopy, and mass spectrometric imaging. These overviews are followed by examples of hypoxia-relevant imaging using a mixture of probes for complementary single-mode imaging techniques. Then, we describe dual-mode molecular switches that are responsive in multiple imaging modalities to at least one hypoxia-induced pathological change. Finally, we offer future perspectives toward dual-mode imaging of hypoxia and hypoxia-induced pathophysiological changes in tumor microenvironments.

Deep-Red/Near-Infrared to Blue-Green Phosphorescent Iridium(III) Complexes Featuring Three Differently Charged (0, -1, and -2) Ligands: Structures, Photophysics, and Organic Light-Emitting Diode Application

We have designed and synthesized a new family of neutral phosphorescent iridium(III) complexes (Ir1-Ir6) featuring three differently charged (0, -1, and -2) ligands, in which biphenyl (bp) is used as a dianionic (-2) ligand, 4,6-difluorophenylpyridine (dfppy) or 1-phenylisoquinoline (piq) is used as a monoanionic (-1) ligand, and 2,2'-bipyridyl (bpy), 1,10-phenanthroline (phen), 1,2-bis(diphenylphosphanyl)benzene (dppb), or 1,2-bis(diphenylphosphanyl)ethane (dppe) is used as a neutral (0) ligand. The X-ray structures confirm that three coordination carbon atoms of all complexes assume a facial geometry, which can be beneficial to the stability of the structure. More importantly, the emitting color of the complexes can be tuned from deep red/near-infrared (NIR) (680-710 nm) to blue-green (466-496 nm) with different monoanionic (-1) ligands and neutral (0) ligands. Interestingly, the complex Ir5 shows a significant aggregation-induced phosphorescent emission effect, while Ir6 with a similar structure shows an opposite aggregation-caused quenching effect, mainly due to slight differences in the neutral (0) ligand structure. Notably, all deep red/NIR-emitting complexes (Ir1-Ir4) exhibit a distinct charge transfer (CT) excited state from the dianionic (-2) ligand to the neutral (0) ligand according to density functional theory calculations, whereas the excited state of blue-green-emitting complexes (Ir5-Ir6) displays the CT from the dianionic (-2) ligand to the monoanionic (-1) ligand. Considering better stability and optical performance, the deep red-emitting complexes (Ir2 and Ir4) with a simple structure are used as emitting layers of organic light-emitting diode devices and achieved good maximum external quantum efficiency (4.9 and 5.8%) peaking at 676 and 655 nm, respectively, with a very low turn-on voltage (2.5 V). This research provides a good strategy for the design of phosphorescent iridium complexes based on three differently charged (0, -1, and -2) ligands and their optoelectric applications.

Luminescent Metal Complexes for Bioassays in the Near-Infrared (NIR) Region

Near-infrared (NIR, 700-1700 nm) luminescent imaging is an emerging bioimaging technology with low photon scattering, minimal autofluorescence, deep tissue penetration, and high spatiotemporal resolution that has shown fascinating promise for NIR imaging-guided theranostics. In recent progress, NIR luminescent metal complexes have attracted substantially increased research attention owing to their intrinsic merits, including small size, anti-photobleaching, long lifetime, and metal-centered NIR emission. In the past decade, scientists have contributed to the advancement of NIR metal complexes involving efforts to improve photophysical properties, biocompatibility, specificity, pharmacokinetics, in vivo visualization, and attempts to exploit new ligand platforms. Herein, we summarize recent progress and provide future perspectives for NIR metal complexes, including d-block transition metals and f-block lanthanides (Ln) as NIR optical molecular probes for bioassays.

Determination and Imaging of Small Biomolecules and Ions Using Ruthenium(II) Complex-Based Chemosensors

Luminescence chemosensors are one of the most useful tools for the determination and imaging of small biomolecules and ions in situ in real time. Based on the unique photo-physical/-chemical properties of ruthenium(II) (Ru(II)) complexes, the development of Ru(II) complex-based chemosensors has attracted increasing attention in recent years, and thus many Ru(II) complexes have been designed and synthesized for the detection of ions and small biomolecules in biological and environmental samples. In this work, we summarize the research advances in the development of Ru(II) complex-based chemosensors for the determination of ions and small biomolecules, including anions, metal ions, reactive biomolecules and amino acids, with a particular focus on binding/reaction-based chemosensors for the investigation of intracellular analytes’ evolution through luminescence analysis and imaging. The advances, challenges and future research directions in the development of Ru(II) complex-based chemosensors are also discussed.

Morphology-Dependent One- and Two-Photon Absorption Properties in Blue Emitting CsPbBr3 Nanocrystals

The linear and nonlinear optical parameters and morphologic dependence of CsPbBr₃ nanocrystals (NCs) are crucial for device engineering. In particular, such information in asymmetric nanocrystals is still insufficient. We characterized the OPLA (σ¹) and TPA cross sections (σ²) of a series CsPbBr₃ nanocrystals with various aspect ratios (AR) using femtosecond transient absorption spectroscopy (TAS). The σ¹ presents a linear volume dependence of all the samples, which agrees with the previous behavior in CsPbBr₃ QDs. However, the σ² values do not exhibit conventional power dependency of the crystal volume but are also modulated by the shape-dependent local field factors. In addition, the local field effect in CsPbBr₃ NCs is contributed by their asymmetric morphologies and polar ionic lattices, which is more pronounced than in conventional semiconductor NCs. Finally, we revealed that the lifetimes of photogenerated multiexcitonic species of those nanocrystals feature identical morphology independence in both OPLA and TPA.

Aggregation‐Induced Dual Phosphorescence from ( o ‐Bromophenyl)‐Bis(2,6‐Dimethylphenyl)Borane at Room Temperature

Designing highly efficient purely organic phosphors at room temperature remains a challenge because of fast non‐radiative processes and slow intersystem crossing (ISC) rates. The majority of them emit only single component phosphorescence. Herein, we have prepared 3 isomers (o, m, p‐bromophenyl)‐bis(2,6‐dimethylphenyl)boranes. Among the 3 isomers (o‐, m‐ and p‐BrTAB) synthesized, the ortho‐one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. Based on theoretical calculations and crystal structure analysis of o‐BrTAB, the short lifetime component is ascribed to the T₁^M state of the monomer which emits the higher energy phosphorescence. The long‐lived, lower energy phosphorescence emission is attributed to the T₁^A state of an aggregate, with multiple intermolecular interactions existing in crystalline o‐BrTAB inhibiting nonradiative decay and stabilizing the triplet states efficiently.

Tuning the Photophysical Properties of Homoleptic Tris-Cyclometalated Ir(III) Complexes by Facile Modification of the Imidazo-Phenanthridine and Their Application to Phosphorescent Organic Light-Emitting Diodes

To explore the excited-state electronic structure of the blue-emitting Ir(dmp)₃ dopant material (dmp = 3-(2,6-dimethylphenyl)-7-methylimidazo[1,2-f]phenanthridine), which is notable for durable blue phosphorescent organic light-emitting diode (PhOLED), a series of homoleptic dmp-based Ir(III) complexes (DMP-R, tris[3-(2,6-dimethylphenyl)-7-R-imidazo[1,2-f]phenanthridin-12-yl-κC ¹²,κN ¹]iridium, R = H, CH₃, F, and CF₃) were prepared by introducing an electron-donating group (EDG; -CH₃) or an electron-withdrawing group (EWG; -F and -CF₃) at the 7-position of the imidazo-phenanthridine ligand. The photophysical analysis demonstrated that the alteration from EDG to EWGs led to redshifted structureless emission profiles, which were correlated with variations in the ³MLCT/³ILCT ratio in the T₁ excited state. From electrochemical studies and density functional theory calculations, it turned out that the excited-state nature of the dmp-based Ir(III) complexes was significantly affected by the inductive effect of the 7-substituent of the cyclometalating dmp ligand. As a result of the lowest unoccupied molecular orbital energy stabilization by the EWGs that suppressed the non-radiative pathway from the emissive triplet excited state to the ³ d-d state, the F- and CF₃-modified Ir(dmp)₃ complexes (DMP-F and DMP-CF ₃ ) showed quantum yields of 27-30% in the solution state, which were at least 4- or 5-fold higher than those shown by DMP-H and DMP-CH ₃ . A PhOLED device based on DMP-CF ₃ [CIE chromaticity (0.17, 0.39)], which demonstrated a distinct ³MLCT characteristic, exhibited better electroluminescent efficiencies with an external quantum efficiency of 13.5% than that based on DMP-CH ₃ .

Probing emission of a DNA-stabilized silver nanocluster from the sub-nanosecond to millisecond timescale in a single measurement

A method for measuring emission over a range of sub-nanosecond to millisecond timescales is presented and demonstrated for a DNA-stabilized silver nanocluster (DNA-AgNC) displaying dual emission. This approach allows one to disentangle the temporal evolution of the two spectrally overlapping signals and to determine both the nano- and microsecond decay times of the two emission components, together with the time they take to reach the steady-state equilibrium. Addition of a second near-infrared laser, synchronized with a fixed delay, enables simultaneous characterization of optically activated delayed fluorescence (OADF). For this particular DNA-AgNC, we demonstrate that the microsecond decay times of the luminescent state and the OADF-responsible state are similar, indicating that the OADF process starts from the luminescent state.

A method for measuring emission over a range of sub-nanosecond to millisecond timescales is presented and demonstrated for a DNA-stabilized silver nanocluster (DNA-AgNC) displaying dual emission.

Dye Sensitization Offers a Brighter Afterglow Nanoparticle Future for in vivo Recharged Luminescent Imaging

While concerns about improving recharged afterglow intensity in vivo still motivate further exploration, afterglow nanoparticles (AGNP) offer unique optical merit for autofluorescence-free biological imaging. Apart from efforts enhancing the afterglow emission properties of AGNP, improving afterglow excitation response to visible or near infrared light is important but has lacked success. Dye sensitization has been used to improve the optical response of photovoltaic nanomaterials and to enhance upconversion luminescence efficiency. This concept has recently been expanded and applied to AGNPs. As a new multifunctional nanoprobe, such dye-sensitized AGNP takes advantage of both high spatial resolution fluorescence imaging and sensitive afterglow imaging. This Concept introduces the background, the concept, mechanism, and related imaging application, as well as reviewing existing challenges and proposing future developmental directions for the dye-sensitized AGNPs.

A phosphorescent probe for in vivo imaging in the second near-infrared window

In the second near-infrared spectral window (NIR-II; with wavelengths of 1,000-1,700 nm), in vivo fluorescence imaging can take advantage of reduced tissue autofluorescence and lower light absorption and scattering by tissue. Here, we report the development and in vivo application of a NIR-II phosphorescent probe that has lifetimes of hundreds of microseconds and a Stokes shift of 430 nm. The probe is made of glutathione-capped copper-indium-selenium nanotubes, and in acidic environments (pH 5.5-6.5) switches from displaying fluorescence to phosphorescence. In xenograft models of osteosarcoma and breast cancer, intravenous or intratumoral injections of the probe enabled phosphorescence imaging at signal-to-background ratios, spatial resolutions and sensitivities higher than NIR-II fluorescence imaging with polymer-stabilized copper-indium-sulfide nanorods. Phosphorescence imaging may offer superior imaging performance for a range of biomedical uses.

Reciprocally Photovoltaic Light-Emitting Diode Based on Dispersive Perovskite Nanocrystal

Integrating highly efficient photovoltaic (PV) function into light-emitting diodes (LEDs) for multifunctional display is of great significance for compact low-power electronics, but it remains challenging. Herein, it is demonstrated that solution engineered perovskite nanocrystals (PNCs, ≈100 nm) enable efficient electroluminescence (EL) and PV performance within a single device through tailoring the dispersity and interface. It delivers the maximum brightness of 490 W sr^-1  m^-2 at 2.7 V and 23.2% EL external quantum efficiency, a record value for near-infrared perovskite LED, as well as 15.23% PV efficiency, among the highest value for nanocrystal perovskite solar cells. The PV-EL performance is well in line with the reciprocity relation. These all-solution-processed PV-LED devices open up viable routes to a variety of advanced applications, from touchless interactive screens to energy harvesting displays and data communication.

Sensitization of Nd3+ Luminescence by Simultaneous Two-Photon Excitation through a Coordinating Polymethinic Antenna

We have designed and synthesized two new cyaninic Nd³⁺ complexes where the lanthanide emission can be induced from simultaneous two-photon absorption followed by energy migration. These complexes correspond to a molecular design that uses an antenna ligand formed by the functionalization of a heptamethine dye with 5-ol-phenanthroline or 4-phenyl-terpyridine derivatives. These complexes employ the important nonlinear optical properties of symmetric polymethines to sensitize the lanthanide ion. We verified that simultaneous biphotonic excitation indirectly induces the ⁴F_3/2 → ⁴I_11/2 Nd³⁺ emission using femtosecond laser pulses tuned below the first electronic transition of the antenna. The simultaneous two-photon excitation events initially form the nonlinear-active second excited singlet of the polymethine antenna, which rapidly evolves into its first excited singlet. This state in turn induces the formation of the emissive Nd³⁺ states through energy transfer. The role of the first excited singlet of the antenna as the donor state in this process was verified through time resolution of the antenna's fluorescence. These measurements also provided the rates for antenna-lanthanide energy transfer, which indicate that the phenanthroline-type ligand is approximately five times more efficient for energy transfer than the phenyl-terpyridine derivative due to their relative donor-acceptor distances. The simultaneous two-photon excitation of this polymethine antenna allows for high spatial localization of the Nd³⁺excitation events.

Oxygen Quenching-Resistant Nanoaggregates with Aggregation-Induced Delayed Fluorescence for Time-Resolved Mapping of Intracellular Microviscosity

Microviscosity is a fundamental parameter in the biophysics of life science and governs numerous cellular processes. Thus, the development of real-time quantitative monitoring of microviscosity inside cells is important. The traditional probes for detecting microviscosity via time-resolved luminescence imaging (TRLI) are generally disturbed by autofluorescence or surrounding oxygen in cells. Herein, we developed loose packing nanoaggregates with aggregation-induced delayed fluorescence (FKP-POA and FKP-PTA) and free from the effect of oxygen and autofluorescence for viscosity mapping via TRLI. The feasibility of FKP-PTA nanoparticles (NPs) for microviscosity mapping through TRLI was demonstrated by monitoring the variation of microviscosity inside HepG2 cancer cells, which demonstrated a value change from 14.9 cP to 216.9 cP during the apoptosis. This indicates that FKP-PTA NP can be used as a probe for cellular microviscosity mapping to help people to understand the physiologically dynamic microenvironment. The present results are expected to promote the advancement of diagnostic and therapeutic methods to cope with related diseases.

Near-Infrared Fluorescence Probe for Specific Detection of Acetylcholinesterase and Imaging in Live Cells and Zebrafish

Acetylcholinesterase (AChE) is a pivotal enzyme that is closely related with multiple neurological diseases, such as brain disorders or alterations in the neurotransmission and cancer. The development of convenient methods for imaging AChE activity in biological samples is very important to understand its mechanisms and functions in a living system. Herein, a fluorescent probe exhibiting emission in the near-infrared (NIR) region is developed to detect AChE and visualize biological AChE activities. This probe exhibits a quick response time, reasonable detection limit, and a large Stokes shift accompanied by the NIR emission. The probe has much better reactivity toward AChE than butyrylcholinesterase, which is one of the significant interfering substances. The outstanding specificity of the probe is proved by cellular imaging AChE activity and successful mapping in different regions of zebrafish. Such an effective probe can greatly contribute to ongoing efforts to design emission probes that have distinct properties to assay AChE in biological systems.

Metal-Oxide Nanomaterials Synthesis and Applications in Flexible and Wearable Sensors

Metal-oxide nanomaterials (MONs) have gained considerable interest in the construction of flexible/wearable sensors due to their tunable band gap, low cost, large specific area, and ease of manufacturing. Furthermore, MONs are in high demand for applications, such as gas leakage alarms, environmental protection, health tracking, and smart devices integrated with another system. In this Review, we introduce a comprehensive investigation of factors to boost the sensitivity of MON-based sensors in environmental indicators and health monitoring. Finally, the challenges and perspectives of MON-based flexible/wearable sensors are considered.

Donor manipulation for constructing a pH sensing thermally activated delayed fluorescent probe to detect alkaliphiles

pH homeostasis is essential for alkaliphiles, given their widespread use in biotechnological applications. However, quantitative monitoring of alkaline pH in alkaliphiles remains challenging. Here, we synthesized for the first time, a thermally activated delayed fluorescent (TADF) pH probe: NI-D-OH. Our probe exhibits a good linear relationship between fluorescence intensity and pH in the neutral to alkaline range (pH 7.0-8.6), as well as long-lived TADF emission. We further show that NI-D-OH can be used to monitor intracellular pH in living organisms, and evaluate the effect of Na⁺ on the pH homeostasis, demonstrating the potential for alkaline pH monitoring and time-resolved fluorescence imaging.

Mechanisms of Luminescence in Lanthanide Complexes: A Crucial Role of Metal-Ligand Covalency

A current understanding of the luminescence of lanthanide complexes is based on the phenomenological Judd-Ofelt (JO) theory. However, the mechanisms of electric-dipole transitions lying at its basis were never subjected to a rigorous analysis. Here, we investigate the contributions to the electric-dipole transitions in the Er^{3+ 4}S_3/2 → ⁴I_15/2 band of an erbium trensal complex using state-of-the-art ab initio calculations. We find that the conventional JO mechanism based on the electrostatic crystal field yields only a quarter of the integral intensity of this band. Accordingly, three quarters of it is contributed by covalent binding of erbium and ligand orbitals via three major mechanisms, the 4f ligand and ligand-ligand electric-dipole transitions and covalent enhancement of the hybridization of 4f and even empty orbitals of erbium. We expect that these findings will inspire the design of efficient rare-earth luminescent materials.

Dual-lifetime luminescent probe for time-resolved ratiometric oxygen sensing and imaging

Fluorescent/phosphorescent dual-emissive polymers or hybrids consisting of both fluorophore and phosphor have been used as self-calibrating probes and imaging reagents for cellular molecular oxygen. Oxygen selectively quenches the phosphorescence and the fluorescence serves as an internal reference. The phosphorescence/fluorescence ratio is used as a quantitative indicator of oxygen content. In wavelength-ratiometric probes, the fluorophore and phosphor are designed to emit at different wavelengths. It is easy to achieve spectral separation, but the phosphorescence/fluorescence ratio fluctuates due to the difference in the absorption and scattering of light at different wavelengths by biological samples. Herein we reported a lifetime-ratiometric luminescent polymeric probe where the fluorophore and phosphor emitted at the same wavelength. Spectral separation was achieved based on the difference in their excited-state lifetimes via time-resolved luminescence analysis and imaging. The probe exhibited a phosphorescence lifetime of about 931 ns with a phosphorescence/fluorescence ratio of 4.49 in deaerated aqueous buffer. The lifetime was shortened to 251 ns and the ratio decreased to 1.08 in oxygen saturated solution because of phosphorescence quenching. The utilization of the probe for quantitative oxygen sensing and mapping in living HeLa cells was demonstrated using calibration curves obtained from fixed cells.

Influence on the Apparent Luminescent Lifetime of Rare-Earth Upconversion Nanoparticles by Quenching the Sensitizer's Excited State for Hypochlorous Acid Detection and Bioimaging

Lanthanide-ion-doped upconversion materials have been widely used in biological detection, bioimaging, displays, and anticounterfeiting due to their abilities of real-time readings, high spatial resolution, and deep tissue penetration. The typically long fluorescence lifetimes of rare-earth nanoparticles, in the microsecond to millisecond range, make them useful in interference-free lifetime detection imaging. Most detection systems are accompanied by fluorescence resonance energy transfer (FRET), in which the lifetime of the luminescence center can be used as a signal to reveal the degree of FRET. Due to the complex energy level structure and complex energy transfer processes, the apparent lifetimes of upconversion nanoparticles (UCNPs) do not simply equal the decay time of the corresponding energy level, inducing an insignificant lifetime change in the upconversion detection system. In this study, the relationship between the apparent luminescence lifetime of upconversion and the decay rate of each energy level was studied by numerical simulations. It was proved that the apparent lifetime of the emission at 540 nm was mainly affected by the decay rate of Yb³⁺. We then constructed a nanocomposite with Rh1000 fluorophores loaded onto the surface of UCNPs to quench the sensitizer Yb³⁺. We found that the lifetime of the emission at 540 nm from Er³⁺ was affected to a large extent by the number of attached Rh1000 molecules, proving the greater influence on the apparent luminescent lifetime of Er³⁺ at 540 nm caused by quenching the Yb³⁺ excited state. The qualitative detection of hypochlorous acid (HClO) in vivo was also achieved using the luminescent lifetime as the signal.

Millisecond-Range Time-Resolved Bioimaging Enabled through Ultralong Aqueous Phosphorescence Probes

Probes featuring room-temperature phosphorescence (RTP) are promising tools for time-resolved imaging. It is worth noting that the time scale of time-resolved bioimaging generally ranges around the microsecond level, because of the short-lived emission. Herein, the first example of millisecond-range time-resolved bioimaging is illustrated, which is enabled through a kind of ultralong aqueous phosphorescence probes (i.e., cyclo-(Arg-Gly-AspD-Tyr-Cys)-conjugated zinc-doped silica nanospheres), with a RTP emission lasting for ≈5 s and a lifetime as long as 743.7 ms. We demonstrate that live cells and deep tumor tissue in mice can be specifically targeted through immune-phosphorescence imaging, with a high signal-to-background ratio (SBR) value of ≈69 for in vitro imaging, and ≈627 for in vivo imaging, respectively. We further show that, compared to that of fluorescence imaging, the SBR enhancement of millisecond-range time-resolved in vivo bioimaging is up to 105 times.

Assembly and Applications of Macrocyclic-Confinement-Derived Supramolecular Organic Luminescent Emissions from Cucurbiturils

Cucurbit[n]urils (Q[n]s or CB[n]s), as a classical of artificial organic macrocyclic hosts, were found to have excellent advantages in the fabricating of tunable and smart organic luminescent materials in aqueous media and the solid state with high emitting efficiency under the rigid pumpkin-shaped structure-derived macrocyclic-confinement effect in recent years. This review aims to give a systematically up-to-date overview of the Q[n]-based supramolecular organic luminescent emissions from the confined spaces triggered host-guest complexes, including the assembly fashions and the mechanisms of the macrocycle-based luminescent complexes, as well as their applications. Finally, challenges and outlook are provided. Since this class of Q[n]-based supramolecular organic luminescent emissions, which have essentially derived from the cavity-dependent confinement effect and the resulting assembly fashions, emerged only a few years ago, we hope this review will provide valuable information for the further development of macrocycle-based light-emitting materials and other related research fields.

Near-infrared excitation/emission microscopy with lanthanide-based nanoparticles

Near-infrared optical imaging offers some advantages over conventional imaging, such as deeper tissue penetration, low or no autofluorescence, and reduced tissue scattering. Lanthanide-doped nanoparticles (LnNPs) have become a trend in the field of photoactive nanomaterials for optical imaging due to their unique optical features and because they can use NIR light as excitation and/or emission light. This review is focused on NaREF₄ NPs and offers an overview of the state-of-the-art investigation in their use as luminophores in optical microscopy, time-resolved imaging, and super-resolution nanoscopy based on, or applied to, LnNPs. Secondly, whenever LnNPs are combined with other nanomaterial or nanoparticle to afford nanohybrids, the characterization of their physical and chemical properties is of current interest. In this context, the latest trends in optical microscopy and their future perspectives are discussed.

Mechanical stimuli-induced multiple photophysical responsive AIEgens with high contrast properties

A new cyano-distyrylbenzene derivative with a mechano-force induced high contrast transition in color and emission was demonstrated here. Under mechanical stimuli, the emission peak can undergo a large wavelength shift from 440 nm to 650 nm, while the appearance color can switch from white to pink.

Luminescent Lifetime Regulation of Lanthanide-Doped Nanoparticles for Biosensing

Lanthanide-doped nanoparticles possess numerous advantages including tunable luminescence emission, narrow peak width and excellent optical and thermal stability, especially concerning the long lifetime from microseconds to milliseconds. Differing from other shorter-lifetime fluorescent nanomaterials, the long lifetime of lanthanide-doped nanomaterials is independent with background fluorescence interference and biological tissue depth. This review presents the recent advances in approaches to regulating the lifetime and applications of bioimaging and biodetection. We begin with the introduction of the strategies for regulating the lifetime by modulating the core-shell structure, adjusting the concentration of sensitizer and emitter, changing energy transfer channel, establishing a fluorescence resonance energy transfer pathway and changing temperature. We then summarize the applications of these nanoparticles in biosensing, including ion and molecule detecting, DNA and protease detection, cell labeling, organ imaging and thermal and pH sensing. Finally, the prospects and challenges of the lanthanide lifetime regulation for fundamental research and practical applications are also discussed.

Comparing pH-responsive nanogel swelling in dispersion and inside a polyacrylamide gel using photoluminescence spectroscopy and small-angle neutron scattering

Nanosized probes that report their changes in dimensions within networks in response to environmental stimuli are potentially important for applications such as drug delivery, load-supporting hydrogels and soft robotics. Recently, we developed a fluorescent pH-responsive nanogel (NG) that used Förster-resonance energy transfer (FRET) to report changes in the probe separation and NG swelling within hydrogels using photoluminescence (PL) spectroscopy. However, FRET cannot measure nanoparticle dimensions and is subject to artefacts. Here, we report the use of small-angle neutron scattering (SANS) to study both the NGs in dispersion and in polyacrylamide (PAAm) gels as a function of pH. We compare the PL and SANS data for both systems and as a function of pH. The SANS data for the dispersed NGs indicate that they have a core-shell structure with a swollen mesh size of ∼1.0 nm. We hypothesized that the NGs inside the PAAm gel would show the same general changes in scattering as the pH is increased, as observed for the dispersed NGs, and this is confirmed by the data. In summary, the data confirm that PL is a suitable (accessible) method for reporting internal environmental changes within gels using NG probes.

Highly Sensitive Dual-Mode Optical Thermometry of Er3+/Yb3+ Codoped Lead-Free Double Perovskite Microcrystal

In this Letter, erbium (Er³⁺) and ytterbium (Yb³⁺) codoped perovskite Cs₂Ag_0.6Na_0.4In_0.9Bi_0.1Cl₆ microcrystal (MC) is synthesized and demonstrated systematically to the most prospective optical temperature sensing materials. A dual-mode thermometry based on fluorescence intensity ratio and fluorescence lifetime provides a self-reference and highly sensitive temperature measurement under dual wavelength excitation at a temperature from 300 to 470 K. Combined with the white-light emission derived from self-trapped excitons (STEs), the characteristic emission peak of Er³⁺ ions can be observed under 405 nm laser excitation. The fluorescence intensity ratio (FIR) between perovskite and Er³⁺ is used as temperature-dependent probe signal, of which maximum value for relative and absolute sensitivities reaches to 1.40% K^-1 and 8.20 × 10^-2 K^-1. Moreover, Er³⁺ luminescence becomes stronger with the feeding Yb³⁺ increasing under 980 nm laser excitation. The energy transfer of Er³⁺ and Yb³⁺ is revealed by power-dependent photoluminescence (PL) spectroscopy, and the involved upconversion mechanism pertains to the two-photon excitation process. The results reveal that the Er³⁺/Yb³⁺ codoped lead-free double perovskite MC is a good candidate for a thermometric material for the novel dual-mode design.