Photoelectrochemical DNA Biosensors

Biomedical IoT: Enabling Technologies, Architectural Elements, Challenges, and Future Directions

This paper provides a comprehensive literature review of various technologies and protocols used for medical Internet of Things (IoT) with a thorough examination of current enabling technologies, use cases, applications, and challenges. Despite recent advances, medical IoT is still not considered a routine practice. Due to regulation, ethical, and technological challenges of biomedical hardware, the growth of medical IoT is inhibited. Medical IoT continues to advance in terms of biomedical hardware, and monitoring figures like vital signs, temperature, electrical signals, oxygen levels, cancer indicators, glucose levels, and other bodily levels. In the upcoming years, medical IoT is expected replace old healthcare systems. In comparison to other survey papers on this topic, our paper provides a thorough summary of the most relevant protocols and technologies specifically for medical IoT as well as the challenges. Our paper also contains several proposed frameworks and use cases of medical IoT in hospital settings as well as a comprehensive overview of previous architectures of IoT regarding the strengths and weaknesses. We hope to enable researchers of multiple disciplines, developers, and biomedical engineers to quickly become knowledgeable on how various technologies cooperate and how current frameworks can be modified for new use cases, thus inspiring more growth in medical IoT.

Metal organic frameworks for electrochemical sensor applications: A review

Metal-organic frameworks (MOFs) are broadly known as porous coordination polymers, synthesized by metal-based nodes and organic linkers. MOFs are used in various fields like catalysis, energy storage, sensors, drug delivery etc., due to their versatile properties (tailorable pore size, high surface area, and exposed active sites). This review presents a detailed discussion of MOFs as an electrochemical sensor and their enhancement in the selectivity and sensitivity of the sensor. These sensors are used for the detection of heavy metal ions like Cd²⁺, Pb²⁺, Hg²⁺, and Cu²⁺ from groundwater. Various types of organic pollutants are also detected from the water bodies using MOFs. Furthermore, electrochemical sensing of antibiotics, phenolic compounds, and pesticides has been explored. In addition to this, there is also a detailed discussion of metal nano-particles and metal-oxide based composites which can sense various compounds like glucose, amino acids, uric acid etc. The review will be helpful for young researchers, and an inspiration to future research as challenges and future opportunities of MOF-based electrochemical sensors are also reported.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Small-molecule photosensitizers have great application prospects in photoelectrochemical (PEC) sensing due to their defined composition, diversified structure, and adjustable photophysical properties. Herein, we propose a new strategy for PEC analysis based on the target-induced in situ formation of the organic photosensitizer. Taking thiophenol (PhSH) as a model analyte, we designed and synthesized a 2,4-dinitrophenyl (DNP)-caged coumarin precursor (Dye-PhSH), which was then covalently coupled onto the TiO₂ nanoarray substrate to obtain the working photoanode. Due to the intramolecular photoinduced electron transfer process, Dye-PhSH has only a very weak photoelectric response. Upon reacting with the target, Dye-PhSH undergoes a tandem reaction of the detachment of the DNP moiety and the intramolecular cyclization process, which leads to a coumarin dye with a pronounced photoelectric effect, thus achieving a highly selective turn-on PEC response to PhSH. For the first time, this study was to construct a PEC sensor by exploiting specific organic reactions for the in situ generation of small molecule-based photoactive material. It can be anticipated that the proposed strategy will expand the paradigm of PEC sensing and holds great potential for detecting various other analytes.

Homogeneous Photoelectrochemical Aptasensors for Tetracycline Based on Sulfur-Doped g-C3N4/n-GaN Heterostructures Formed through Self-Assembly

The complex synthesis of photoelectric materials and the difficulty of fixing the identification elements on the photoelectrode are long-standing problems in the field of photoelectrochemical (PEC) biosensing. In this work, a simple PEC aptasensor construction strategy based on a sulfur-doped g-C₃N₄ (SCN)/n-GaN heterostructure photoelectrode was proposed. The SCN/n-GaN heterostructure can be formed through self-assembly in solution since SCN can be uniformly dispersed in solution. In addition, as a dual-function mediate, an aptamer can be fixed on an SCN substrate automatically because of the good adsorption performance of SCN. Therefore, tedious steps of PEC electrode preparation and the fixing of recognition elements were both avoided. Compared with the traditional ones, the construction difficulty and time cost of the prepared PEC aptasensors are greatly reduced. The simplified experimental process improves the stability and reproducibility of the aptasensor. Finally, tetracycline (TET) was used as a model target to verify the sensing performance of the proposed PEC strategy. TET can consume the photogenerated holes of the SCN/n-GaN heterostructure, promote carrier migration, and result in the change in the photocurrent. The linear relationship between the change in the photocurrent intensity and the TET concentration can be used to detect TET. The aptasensor has a linear range of 0.10-10.0 nmol L^-1 and the detection limit is 0.030 nmol L^-1 (3S/N). The aptasensor was applied to the detection of TET in milk samples with satisfactory results.

A microfluidic cloth-based photoelectrochemical analytical device for the detection of glucose in saliva

Photoelectrochemical (PEC) detection is a widely used detection method that uses light to stimulate and photocurrent signals to detect the target. Due to the disengagement of the excitation unit and the detection unit, the PEC background signal is reduced, and the detection sensitivity is improved. In this work, we report the first demonstration of PEC detection for microfluidic cloth-based analytical devices (μCADs). Using PEC μCADs integrated with cadmium sulfide quantum dots (CdS QDs) and multiwalled carbon nanotubes (MWCNTs), the nonenzymatic, sensitive and rapid measurement of glucose in saliva has been achieved. For the cloth-based device, the PEC reaction zone and cloth-based electrodes can be fabricated by inexpensive wax-based and carbon ink-based screen-printing, respectively. By the layer-by-layer method, the as-prepared poly (dimethyl diadly ammonium chloride-functionalized) MWCNTs (PDDA-MWCNTs) and CdS QDs are successively adsorbed onto the working electrode surface of the cloth-based device. In the presence of an excitation source and glucose, the CdS QDs generate a strong oxidizing electron hole that can then continuously oxidize glucose to produce an electrical signal for glucose detection. Under optimized conditions, a linear dependence is obtained between the PEC signal and glucose concentrations in the range of 0.05-1000 μM with a detection limit of 15.99 nM. In the detection range, the cloth-based device also shows acceptable selectivity, reproducibility, and long-term stability. Moreover, the method has been implemented for the detection of glucose in real saliva samples, suggesting good potential for biochemical applications.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Targeting Natural Polymeric DNAs with Harmane: An Insight into Binding and Thermodynamic Interaction Through Biophysical Approach

DNA is one of the major molecular targets for a broad range of anticancer drugs. Hence, interaction studies involving cellular DNA and small molecules can be highly beneficial as they often lead to rational and efficient drug design. In this study, the binding interaction of Harmane (a naturally occurring, bioactive indole alkaloid) with two natural polymeric DNAs, that is, Calf thymus (CT) DNA and Herring testis (HT) DNA has been elucidated using biophysical techniques. A ground state, 1:1 complexation, was revealed by steady-state fluorescence spectroscopy. The thermodynamic profile and energetics of the associated reaction were evaluated by temperature-dependent fluorescence spectroscopy. The spontaneity of the binding was confirmed by the negative ΔG° values in both cases. Negative enthalpy change, along with stronger positive entropic contribution, indicated the dominant electrostatic nature of the interaction and finally the entropy-driven exothermic binding process throughout. Salt-dependent studies further demonstrated the significant contribution of electrostatic interactions in ligand binding toward DNA. Infrared data substantiated the structural information of the said interactions, leading to the exploration of the structure-function relationship.

Crystal-reconstructed BiVO4 semiconductor photoelectrochemical sensor for ultra-sensitive tumor biomarker detection

In this study, we developed a crystal-reconstructed-BiVO₄ aptamer photoelectrochemical (PEC) biosensor by a high-energy laser treatment technique. This biosensor achieves a limit of detection (LOD) (0.82 ag mL^-1), linear detection range (1 ag mL^-1 to 2 ng mL^-1), and resolution ratio (∼18 molecules per mL) for prostate-specific antigen (PSA) tumor biomarker detection. Furthermore, reconstructed surface microstructure and oxygen vacancy doping energy formation after crystal reconstruction induce the stereo-hindrance effect and photogenerated hole energy is reduced during PSA target detection. In this case, a photocurrent inhibition phenomenon for PSA detection is noticed. Based on this photocurrent inversion phenomenon, some dysoxidizable nucleonic acid tumor (miRNA-21) and virus biomarkers (RdRp-COVID) can be detected with a LOD level of ∼10^-16 M by linking the corresponding base paring probe on the surface of the crystal-reconstructed photoanode. In addition to high sensitivity, this PEC biosensor presents high detection specificity, stability, and accuracy in clinical verification. Thus, this crystal-reconstructed PEC biosensor shows application potential in the fields of multi-tumor or viral biomarker detection.

Adopting Back Reduction Current as an Additional Output Signal for Achieving Photoelectrochemical Differentiated Detection

Photoelectrochemical (PEC) sensors are usually based on a single output signal, that is, the photocurrent change caused by the (photoelectro)chemical reaction between target analytes and photoelectrodes. However, the photocurrent may be influenced by redox species other than the target analyte; therefore, modifying the surface of photoelectrodes with probes that selectively bind to the analyte is essential. Moreover, even though various surface modification methods have been developed, distinguishing molecularly similar chemicals using PEC sensing systems remains a significant challenge. To address these selectivity issues, we proposed a photoanode-based PEC sensor that utilizes a cathodic transient current as a second output signal in addition to the photocurrent, which arises from the back reduction of photo-oxidized species. Factors influencing the back reduction were investigated by observing the transient photocurrent of hematite photoanodes in the presence of model redox probes. The chemical environment around the electrode-electrolyte interface was manipulated by altering the electrolyte composition or modifying the electrode surface. The favorable interaction between the electrode surface and redox species led to an increase in the extent of back reduction and the cathodic transient current. In addition, the extent of back reduction also depends on the chemical identity of the redox species, such as the kinetics of subsequent chemical reactions. Therefore, the synergistic combination of the photocurrent and the cathodic transient current enabled the differentiated detection of various catecholamine neurotransmitters with a single pristine photoelectrode, which has never been achieved using traditional PEC methods. Revisiting the transient photocurrent can complement conventional PEC applications and offers possibilities for more effective semiconductor-based applications.

Photoresponsive DNA materials and their applications

Photoresponsive nucleic acids attract growing interest as functional constituents in materials science. Integration of photoisomerizable units into DNA strands provides an ideal handle for the reversible reconfiguration of nucleic acid architectures by light irradiation, triggering changes in the chemical and structural properties of the nanostructures that can be exploited in the development of photoresponsive functional devices such as machines, origami structures and ion channels, as well as environmentally adaptable 'smart' materials including nanoparticle aggregates and hydrogels. Moreover, photoresponsive DNA components allow control over the composition of dynamic supramolecular ensembles that mimic native networks. Beyond this, the modification of nucleic acids with photosensitizer functionality enables these biopolymers to act as scaffolds for spatial organization of electron transfer reactions mimicking natural photosynthesis. This review provides a comprehensive overview of these exciting developments in the design of photoresponsive DNA materials, and showcases a range of applications in catalysis, sensing and drug delivery/release. The key challenges facing the development of the field in the coming years are addressed, and exciting emergent research directions are identified.

Coenzyme-catalyzed electroinitiated reversible addition fragmentation chain transfer polymerization for ultrasensitive electrochemical DNA detection

Ultrasensitive detection of biomarkers at an early stage is generally limited by external influence factors such as high reaction temperature, complex operations, and sophisticated instruments. Here, we circumvent these problems by using nicotinamide adenine dinucleotide (NAD⁺) to control electroinitiated reversible addition fragmentation chain transfer (electro-RAFT) polymerization for biosensing that enables the detection of a few molecules of target DNA. In this coenzyme-catalyzed electro-RAFT polymerization, numerous ferrocenylmethyl methacrylate (FCMMA) as monomer with electrochemistry signal were linked to the biomarker on Au electrode. Afterwards, a strong oxidation peak appears at the potential of about 0.3 V that represents a typical oxidation potential of FCMMA. The sensitivity of this methodology was presented by detecting DNA from 10^-1 to 10⁴ fM concentration and detection limit (LOD) being down to 4.39 aM in 10 μL samples. This is lower by factors than detection limits of most other ultra-sensitive electrochemical DNA assays.

Singlet oxygen-based photoelectrochemical detection of DNA

The current work, designed for the photoelectrochemical detection of DNA, evaluates light-responsive DNA probes carrying molecular photosensitizers generating singlet oxygen (¹O₂). We take advantage of their chromophore's ability to produce ¹O₂ upon photoexcitation and subsequent photocurrent response. Type I, fluorescent and type II photosensitizers were studied using diode lasers at 406 nm blue, 532 nm green and 659 nm red lasers in the presensce and absence of a redox reporter, hydroquinone (HQ). Only type II photosensitizers (producing ¹O₂) resulted in a noticeable photocurrent in 1-4 nA range upon illumination, in particular, dissolved DNA probes labeled with chlorin e6 and erythrosine were found to give a well-detectable photocurrent response in the presence of HQ. Whereas, Type I photosensitizers and fluorescent chromophores generate negligible photocurrents (<0.15 nA). The analytical performance of the sensing system was evaluated using a magnetic beads-based DNA assay on disposable electrode platforms, with a focus to enhance the sensitivity and robustness of the technique in detecting complementary DNA targets. Amplified photocurrent responses in the range of 70-100 nA were obtained and detection limits of 17 pM and 10 pM were achieved using magnetic beads-captured chlorin e6 and erythrosine labeled DNA probes respectively. The presented novel photoelectrochemical detection can further be optimized and employed in applications for which enzymatic amplification such as polymerase chain reaction (PCR) is not applicable owing to their limitations and as an effective alternative to colorimetric detection when rapid detection of specific nucleic acid targets is required.

Fabrication of an imprinted polymer based graphene oxide composite for label-free electrochemical sensing of Sus DNA

An innovative label-free electrochemical sensor was developed for selective detection of Sus (pig) Deoxyribonucleic acid (DNA) through adenine imprinted polypyrrole fabricated on the surface of allyl mercaptan modified GO (MIP/mGO).

Spatially-extended 3D magnetic DNA nanodevice-based split-type photoelectrochemical strategy for sensitive and reliable miRNA detection in cancer cells

To improve the accuracy of PEC sensing. We developed a split-type “turn-off” PEC biosensor based on spatially-extended 3D magnetic DNA nanodevices with high-order DNA amplifiers for sensitive and reliable detection of miRNAs in cancer cells.

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

Photoelectrochemical biosensor for DNA hydroxymethylation detection based on the enhanced photoactivity of in-situ synthesized Bi4NbO8Cl@Bi2S3 heterojunction

As an important epigenetic modification, 5-hydroxymethylcytosine (5hmC) aroused wide concern about the distribution and the function. Due to the necessity of 5hmC detection, a novel photoelectrochemical (PEC) biosensor was established based on the in-situ generated heterojunction of Bi₄NbO₈Cl@Bi₂S₃, which was employed as the substrate material with excellent photoelectric property. The specific recognition of 5hmC relied on the covalent reaction between -CH₂OH of 5hmC and -SH on the substrate electrode under the catalysis of M.HhaI methyltransferase. Afterwards, ZrO₂ was used as signal amplification unit capturing by the specific reaction of Zr with the phosphate group of 5hmC. The experimental results demonstrated well specificity and sensitivity of this biosensor. Under optimal conditions, the linear relationship between the photocurrent and the logarithm value of 5hmC concentration was constructed with the range from 0.3 to 300 nM and the detection limit of 0.0779 nM (S/N = 3). The procedures of constructing this biosensor were compact and convenient, and this biosensor realized actual detection of 5hmC level in wheat sample. Significantly, this biosensor was applied to a preliminary study that the heavy metal Pb²⁺ and the perfluorooctanoic acid influence the expression of 5hmC in the genomic DNA of wheat seedling roots and leaves.

Flexible photoelectrochemical biosensor for ultrasensitive microRNA detection based on concatenated multiplex signal amplification

Precise microRNA (miRNA) analysis is significant importance for early disease diagnosis. Herein, a novel flexible photoelectrochemical (PEC) biosensor for miRNA determination was developed by employing CdS NPs-modified carbon cloth (CC) on polyimide (PI) film as photoelectric material to provide the PEC responses and an efficient four-stage reaction system as the target recognition and signal amplification unit to improve the analytical performance. In this PEC biosensor, the presence of target miR-21 would trigger the catalytic hairpin assembly (CHA) and the following hybridization chain reaction (HCR) to produce a long dsDNA labeled with numerous biotins, which would further capture a large amount of alkaline phosphatase (ALP) for catalyzing the generation of ascorbic acid (AA). As an efficient electron donor, AA could be oxidized by the photoelectrode, which would initiate a redox cycling amplification process to regenerate AA, resulting in the enhancement of the photocurrent response. Benefitting from the synergistic nucleic acid-based, enzyme catalytic, and chemical signal amplification strategies, the proposed biosensing strategy enabled ultrasensitive miRNA determination. As expected, the PEC biosensor performed satisfactory analytical performances with a linear range of 1 fM to 1 nM and the detection limit down to 0.41 fM. Furthermore, the PEC biosensing strategy exhibited recommendable selectivity, stability, flexibility, and practical applicability. Therefore, this sensing platform provides promising potential for application in bioassay and early diagnosis of disease.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Rational Utilization of Photoelectrochemistry of Photosystem II for Self-Powered Photocathodic Detection of MicroRNA in Cells

The photoanode, photosystem II (PSII)/hierarchical inverse opal (IO) TiO₂, is coupled to the complementary photocathode, PbS quantum dots (QDs)/DNA probes, which is then integrated into a two-compartment photoelectrochemical (PEC) cell to achieve a self-powered system to enable photocathodic detection of microRNA-10b from HeLa cells. In such a system, all of the PSII catalytic products, i.e., electrons, protons, and O₂, were rationally utilized and could overcome the general issue of varied O₂ levels in photocathodic detection. The correlation between the target-triggered formation of the DNA complexes and the catalytic reduction of the dissolved O₂ makes possible the steady microRNA-10b detection with good sensitivity and selectivity. This work has unveiled the ability of PSII to construct self-powered detecting devices and shed light on its application in new arenas.

Dual-wavelength responsive photoelectrochemical aptasensor based on ionic liquid functionalized Zn-MOFs and noble metal nanoparticles for the simultaneous detection of multiple tumor markers

A single tumor marker may correspond to a variety of diseases, and a specific disease requires the joint detection of multiple tumor markers for improving the accuracy of diagnoses. An ionic liquid-functionalized metal-organic framework (Zn-MOF microspheres) was used as the substrate to capture the aptamer (Ab1), and noble metal nanoparticles were used to label a signal aptamer (Ab2) to construct a dual-wavelength responsive sandwich-type photoelectrochemical (PEC) aptasensor. Due to the size effect, plasma resonance and the response of the noble metal nanoparticle enhancement system to different excitation wavelengths, the simultaneous detection of CEA and CA153 tumor markers was realized. Under the optimized conditions, CA153 and CEA at concentrations of 0.05-100 U mL^-1 and 0.005-10 ng mL^-1 were detected by the PEC aptasensor. Detection limits calculated for CA153 and CEA determinations were 0.0275 U mL^-1 and 2.85 pg mL^-1 (S/N = 3), respectively. CA153 and CEA in serum samples were detected by the PEC aptasensor, and their concentrations were well consistent with that obtained from the ELISA. In addition, the PEC aptasensor exhibited a recovery rate of 96.98%-103.4%, and a relative standard deviation of 1.1%-3.6%, indicating good practical value and accuracy, further confirming its potential for clinical diagnosis.

Facile fabrication of binder-free photoelectrode for sensitive glucose sensing

A novel carbon nitride particle-decorated three-dimensional porous nickel foam (CN/NF) was fabricated by a simple thermal polymerization deposition method for photoelectrochemical glucose detection. In this PEC sensing system, the synergetic effect of the photoactive CN and conductive current collector NF with multi-charge transfer channels contributed to the efficient separation of photoexcited charge carriers. The CN/NF electrode showed an excellent response for glucose detection and good anti-interference properties. A wide linear detection up to 1000μM and sensitivity of 460.2μA cm^-2mM^-1were obtained. This work provides a new strategy for designing binder-free electrodes for PEC sensing.

Photoelectrochemical IL-6 Immunoassay Manufactured on Multifunctional Catecholate-Modified TiO2 Scaffolds

There is an increasing interest in using photoelectrochemistry for enhancing the signal-to-noise ratio and sensitivity of electrochemical biosensors. Nevertheless, it remains challenging to create photoelectrochemical biosensors founded on stable material systems that are also easily biofunctionalized for sensing applications. Herein, a photoelectrochemical immunosensor is reported, in which the concentration of the target protein directly correlates to a change in the measured photocurrent. The material system for the photoelectrode signal transducer involves using catecholate ligands to modify the properties of TiO₂ nanostructures in a three-pronged approach of morphology tuning, photoabsorption enhancement, and facilitating bioconjugation. The catecholate-modified TiO₂ photoelectrode is combined with a signal-off direct immunoassay to detect interleukin-6 (IL-6), a key biomarker for diagnosing and monitoring various diseases. Catecholate ligands are added during hydrothermal synthesis of TiO₂ to enable the growth of three-dimensional nanostructures to form highly porous photoelectrodes that provide a three-dimensional scaffold for immobilizing capture antibodies. Surface modification by catecholate ligands greatly enhances photocurrent generation of the TiO₂ photoelectrodes by improving photoabsorption in the visible range. Additionally, catecholate molecules facilitate bioconjugation and probe immobilization by forming a Schiff-base between their -COH group and the -NH₂ group of the capture antibodies. The highest photocurrent achieved herein is 8.89 μA cm^-2, which represents an enhancement by a factor of 87 from unmodified TiO₂. The fabricated immunosensor shows a limit-of-detection of 3.6 pg mL^-1 and a log-linear dynamic range of 2-2000 pg mL^-1 for IL-6 in human blood plasma.

Recognition and Selectivity Analysis Monitoring of Multicomponent Steroid Estrogen Mixtures in Complex Systems Using a Group-Targeting Environmental Sensor

The same class of steroid estrogen mixtures, coexisting in the environment of 17β-estradiol, estrone (E1), and ethinyl estradiol (EE2), have strong ability to disrupt the human endocrine system and are seriously prejudicial to the health of the organism and environmental safety. Herein, a highly sensitive and group-targeting environmental monitoring sensor was fabricated for a comprehensive analysis of multicomponent steroid estrogens (multi-SEs) in complex systems. This breakthrough was based on the highly sensitive photoelectrochemical response composite material CdSe NPs-TiO₂ nanotube and highly group-specific aptamers. The optimized procedure exhibited not only high sensitivity in a wide range of concentrations from 0.1 to 50 nM, indeed, the minimum detection limit was 33 pM, but also strong resistance to interference. The affinity and consistent action pockets of this sensor enable selective detection of multi-SEs in complex systems. It subsequently was applied for the analysis of multi-SEs from three real samples in the environment including medical wastewater, river water, and tap water to provide a means to clarify the fate of multi-SEs in the process of migration and transformation. This monitoring sensor has a brilliant application prospect for the identification and monitoring of the same class of endocrine-disrupting chemical mixtures in environmental complex systems.

Methylene blue embedded duplex DNA as an efficient signal stimulator of petal-like BiVO4 for ultrasensitive photoelectrochemical bioassay

Conventionally, the photoelectrochemistry relies on freely diffusive signal molecules in solution to stimulate the photocurrent output, leading to limited sensing strategies. Herein, we showcase the methylene blue (MB) embedded duplex DNA for efficient signal stimuli and its application for ultrasensitive photoelectrochemical (PEC) bioassay. Specifically, the MB embedded duplex DNA scavenged the photogenerated holes of petal-like BiVO₄ efficiently, and thus greatly augmented the anodic photocurrent output. Taking the miRNA-21 as a model target, whose biorecognition reaction was aided by the rolling circle amplification (RCA) reaction to finally produce an amplified amount of double-stranded DNA (dsDNA) with embedded MB on the photoelectrode's surface, a "label-free" and "signal-on" PEC biosensing platform was implemented with ultra-sensitivity and high selectivity. The proposed strategy could detect miRNA-21 in the concentration range of 5.0 fM to 10 nM, with the detection limit as low as 0.3 fM. This work opens up the utilization of redox substance intercalated duplex DNA for an efficient signal stimulator, which hints the prospect of other more intercalators embedded DNA for versatile biosensing purposes. Importantly, considering the large quantities of bioreactions that involve duplex DNA as reactants/products, the developed signal transduction strategy may further find wide applications in bioanalysis for targeting more analytes.

A ratiometric photoelectrochemical microsensor based on a small-molecule organic semiconductor for reliable in vivo analysis

Photoelectrochemical (PEC) sensing has been developing quickly in recent years, while its in vivo application is still in the infancy. The complexity of biological environments poses a high challenge to the specificity and reliability of PEC sensing. We herein proposed the concept of small-molecule organic semiconductor (SMOS)-based ratiometric PEC sensing making use of the structural flexibility as well as readily tunable energy band of SMOS. Xanthene skeleton-based CyOH was prepared as a photoactive molecule, and its absorption band and corresponding PEC output can be modulated by an intramolecular charge transfer process. As such, the target mediated shift of absorption offered the opportunity to construct a ratiometric PEC sensor. A proof-of-concept probe CyOThiols was synthesized and assembled on a Ti wire electrode (TiWE) to prepare a highly selective microsensor for thiols. Under two monochromatic laser excitation (808 nm and 750 nm), CyOThiols/TiWE offered a ratiometric signal (j₈₀₈/j₇₅₀), which exhibited pronounced capacity to offset the disturbance of environmental factors, guaranteeing its reliability for application in vivo. The ratiometric PEC sensor achieved the observation of bio-thiol release induced by cytotoxic edema and fluctuations of thiols in drug-induced epilepsy in living rat brains.

The first small-molecule organic semiconductor-based ratiometric photoelectrochemical sensor was proposed, which exhibited pronounced selectivity and capacity to offset environmental disturbance, guaranteeing its reliability for in vivo analysis.

An Integrated Photoelectrochemical Nanotool for Intracellular Drug Delivery and Evaluation of Treatment Effect

With reduced background and high sensitivity, photoelectrochemistry (PEC) may be applied as an intracellular nanotool and open a new technological direction of single-cell study. Nevertheless, the present palette of single-cell tools lacks such a PEC-oriented solution. Here a dual-functional photocathodic single-cell nanotool capable of direct electroosmotic intracellular drug delivery and evaluation of oxidative stress is devised by engineering a target-specific organic molecule/NiO/Ni film at the tip of a nanopipette. Specifically, the organic molecule probe serves simultaneously as the biorecognition element and sensitizer to synergize with p-type NiO. Upon intracellular delivery at picoliter level, the oxidative stress effect will cause structural change of the organic probe, switching its optical absorption and altering the cathodic response. This work has revealed the potential of PEC single-cell nanotool and extended the boundary of current single-cell electroanalysis.

[Ru(bpy)3]2+@Ce-UiO-66/Mn:Bi2S3 Heterojunction and Its Exceptional Photoelectrochemical Aptasensing Properties for Ofloxacin Detection

A photoelectrochemical (PEC) aptasensor on basis of [Ru(bpy)₃]²⁺@Ce-UiO-66/Mn:Bi₂S₃ composites was constructed for detecting ofloxacin (OFL). First, Ce-UiO-66, prepared by a solvothermal method, had Zr⁴⁺-Zr³⁺ and Ce⁴⁺-Ce³⁺ intervalence cycles to increase the charge separation efficiency. Subsequently, Ce-UiO-66 was further modified by [Ru(bpy)₃]²⁺ and Mn:Bi₂S₃ cosensitization to improve the photoelectric activity. [Ru(bpy)₃]²⁺ not only broadened the range of light absorbed but also reacted with an electron donor to maintain the photoelectric conversion process. Among the [Ru(bpy)₃]²⁺@Ce-UiO-66/Mn:Bi₂S₃ heterojunction, Mn:Bi₂S₃ was a photosensitizer, which maximized the efficiency of the electron-hole separation and significantly improved photocurrent. Then, an aptamer was used as a biorecognition unit for OFL-specific detection. Under the best conditions, the PEC aptasensor realized the sensitive detection of OFL, with a detection range of 0.01-100 nmol/L and a detection limit of 6 pmol/L. In addition, the constructed PEC OFL sensor showed good reproducibility, stability, and specificity.

The in situ formation of a hole-transporting material on bismuth tungstate for innovative photoelectrochemical aptasensing

We present the in situ formation of a hole-transporting material (bismuth hexacyanoferrate) on the surface of bismuth tungstate aimed at an innovative photoelectrochemical strategy. This approach enabled a competent aptasensing platform for chloramphenicol that was amenable to homogenous, label-free, and split-mode detection.

Cyclometalated Iridium(III) Complex-Sensitized NiO-Based-Cathodic Photoelectrochemical Platform for DNA Methyltransferase Assay

This work reports an efficient [(C6)₂Ir(dppz)]⁺PF₆^- (C6 = coumarin 6 and dppz = dipyridophenazine)-sensitized NiO photocathode and its application in photoelectrochemical (PEC) bioanalysis field for the first time. This dye-sensitized NiO photocathode was found to exhibit a markedly enhanced cathodic photocurrent. A sensitive cathodic PEC platform was proposed integrating the as-prepared photocathode with enzyme-free cascaded amplification strategies of the catalytic hairpin assembly (CHA) and the hybridization chain reaction (HCR) for DNA methyltransferase (MTase) assay. A hairpin DNA(H_Dam) with specific recognition site of Dam MTase in its stem was designed. The site of H_Dam was methylated in the presence of Dam MTase and then cut by endonuclease DpnI. The released loop fragment, as an initiator, triggered the CHA circuit and the follow-up HCR circuit, resulting in long dsDNA concatemers on the ITO electrode. Numerous [(C6)₂Ir(dppz)]⁺PF₆^- were intercalated into dsDNA, and highly efficient signal amplification was realized. Benefiting from the superior iridium(III) complex-sensitized NiO photocathode and effective amplification strategy, a detection limit of 0.0028 U/mL for the determination of Dam MTase was achieved. Moreover, this work further demonstrated that these proposed tactics could be applied to screen Dam MTase activity inhibitors.

Molecularly imprinted polymers-based DNA biosensors

In multiple biological processes, molecular recognition performs an integral role in detecting bio analytes. Molecular imprinted polymers (MIPs) are tailored sensing materials that can biomimic the biologic ligands and can detect specific target molecules selectively and sensitively. The formulation of molecularly imprinted polymers is followed by the formulation of a control termed as non-imprinted polymer (NIP), which, in the absence of a template, is commonly formulated to evaluate whether distinctive imprints have been produced for the template. Given the difficulties confronting bioanalytical researchers, it is inevitable that this strategy would come out as a central route of multidisciplinary studies to create extremely promising stable artificial receptors as a replacement or accelerate biological matrices. The ease of synthesis, low cost, capability to 'tailor' recognition element for analyte molecules, and stability under harsh environments make MIPs promising candidates as a recognition tool for biosensing. Compared to biological systems, molecular imprinting techniques have several advantages, including high recognition ability, long-term durability, low cost, and robustness, allowing molecularly imprinted polymers to be employed in drug delivery, biosensor technology, and nanotechnology. Molecular imprinted polymer-based sensors still have certain shortcomings in determining biomacromolecules (nucleic acid, protein, lipids, and carbohydrates), considering the vast volume of the latest literature on biomicromolecules. These potential materials are still required to address a few weaknesses until gaining their position in recognition of biomacromolecules. This review aims to highlight the current progress in molecularly imprinted polymers (MIPs)-based sensors for the determination of deoxyribonucleic acid (DNA) or nucleobases.

Surface functionalization of nanomaterials by aryl diazonium salts for biomedical sciences

Nanoparticles (NPs) can be prepared by simple reactions and methods from a number of materials. Their small size opens up a number of applications in different fields, among which biomedicine, including: i) drug delivery, ii) biosensors, iii) bioimaging, iv) antibacterial activity. To be able to perform such tasks, NPs must be modified with a variety of functional molecules, such as drugs, targeting groups, chemical tags or antibacterial agents, and must also be prevented from aggregation. The attachment must be stable to resist during the transportation to the targeted location. Diazonium salts, which have been widely used for coupling applications and surface modification, fulfil such criteria. Moreover, they are simple to prepare and can be easily substituted with a large number of organic groups. This review describes the use of these compounds in nanomedicine with a focus on the construction of nanohybrids derived from metal, oxide and carbon-based NPs as well as viruses.

Photoelectrochemical Biosensor for MicroRNA-21 Based on High Photocurrent of TiO2/Two-Dimensional Coordination Polymer CuClx(MBA)y Photoelectrode

Conventional photosensitive materials such as TiO₂ suffer from restricted absorption in the ultraviolet region, fast recombination of photogenerated electron-hole pairs, and a lack of functional groups for biocoupling, which hinder their application in photoelectrochemical (PEC) biosensing. Herein, a new coordination polymer (CP) based on Cu(I), chloridion, and 4-mercaptobenzoic acid (MBA) has been designed and synthesized (called CuCl_x(MBA)_y). The prepared p-type CuCl_x(MBA)_y exhibits visible-light absorption due to its narrow optical band gap (2.59 eV), and its proper band edge position enables it to form a p-n junction with TiO₂. Through layer-by-layer assembling, the photocurrent intensity of the CuCl_x(MBA)_y/TiO₂/FTO composite photoelectrode was 3.7-fold higher than that of a TiO₂/FTO electrode and 35-fold higher than a CuCl_x(MBA)_y/FTO electrode. The potential enhancement mechanism was discussed, which lies in the contributions of CuCl_x(MBA)_y in enhancing absorption in the visible-light region and boosting the separation of electron-hole pairs of TiO₂ by the p-n junction. Furthermore, CuCl_x(MBA)_y nanosheets can realize bioconjugation directly, thanks to its abundant carboxyl groups. The CuCl_x(MBA)_y/TiO₂/FTO composite photoelectrodes were applied to develop a sensitive PEC biosensor for microRNA-21 (model target). By subtly exploiting the energy transfer between CuCl_x(MBA)_y and Au nanoparticles (AuNPs), AuNPs served as effective quenchers. In the presence of the target, AuNP-labeled sDNA1 connected to the electrode surface, and thus, a decreased photocurrent was obtained. The proposed biosensor has a low detection limit of 0.29 fM (S/N = 3), good selectivity, and reproducibility. The proposed system was applied to monitor microRNA in cancer cells with satisfying results.

Electrochemical Polymerization Induced Chirality Fixation of Crystalline Pillararene-Based Polymer and Its Application in Interfacial Chiral Sensing

A new strategy has been developed for the direct chirality fixation, which is induced by electrochemical polymerization, of macrocyclic hosts pillar[5]arene. Taking advantage of electrochemical polymerization, thiophene-modified pillar[5]arene monomers (Th-P[5]A) have been regularly arranged under the action of an electric field to form chiral nanofiber-like crystalline pillar[5]arene-based polymers (poly-Th-P[5]A), showing a significant circular dichroism (CD) signal. With the active photochemical properties, poly-Th-P[5]A is first used as a photoelectrochemical (PEC) chiral sensor for the identification and determination of l- and d-ascorbic acid (l-AA, d-AA) without adding any extra photoactive probes. Importantly, the chiral recognition between poly-Th-P[5]A and l-AA also triggers a polarity conversion for the photocurrent of the polymer, and it greatly results in a broad chiral detection range for l-AA, crossing 6 orders of magnitude. This work provides a promotional strategy for building a PEC chiral recognition platform based on pillararenes.

Proton-Regulated Catalytic Activity of Nanozymes for Dual-Modal Bioassay of Urease Activity

Benefiting from the merits of high stability and superior activity, nanozymes are recognized as promising alternatives to natural enzymes. Despite the great leaps in the field of therapy and colorimetric sensing, the development of highly sensitive nanozyme-involved photoelectrochemical (PEC) biosensors is still in its infancy. Specifically, the investigation of multifunctional nanozymes facilitating different catalytic reactions remains largely unexplored due to the difficulty in synergistically amplifying the PEC signals. In this work, mesoporous trimetallic AuPtPd nanospheres were synthesized with both efficient oxidase and peroxidase-like activities, which can synergistically catalyze the oxidation of 4-chloro-1-naphthol to produce benzo-4-chlorohexadienone precipitation on the surface of photoactive materials, and thus lead to the decreased photocurrent as well as increased charge-transfer resistance. Inspired by the proton-dependent catalytic activity of nanozymes, a self-regulated dual-modal PEC and electrochemical bioassay of urease activity was innovatively established by in situ regulating the activity of AuPtPd nanozymes through urease-mediated proton-consuming enzymatic reactions, which can remarkably improve the accuracy of the assay. Meanwhile, the determination of urease activity in spiked human saliva samples was successfully realized, indicating the reliability of the biosensor and its application prospects in clinical diagnosis.

A Practical Electrochemical Nanotool for Facile Quantification of Amino Acids in Single Cell

Though significant advances are made in the arena of single-cell electroanalysis, quantification of intracellular amino acids of human cells remains unsolved. Exemplified by l-histidine (l-His), this issue is addressed by a practical electrochemical nanotool synergizing the highly accessible nanopipette with commercially available synthetic DNAzyme. The fabricated nanotools are screened before operation of a single-use manner, and the l-His-provoked cleavage of the DNA molecules can be sensibly transduced by the ionic current rectification response, the intrinsic property of nanopipette governed by its interior surface charges. Regional distribution of cytosolic l-His level in human cells is electrochemically quantified for the first time, and time-dependent drug treatment effects are further revealed. This work unveils the possibility of electrochemistry for quantification of cytosolic amino acids of a spatial- and time-based manner and ultimately enables a better understanding of amino acid-involved events in living cells.

Near-infrared photoactive Yb-MOF functionalized with a large conjugate ionic liquid: synthesis and application for photoelectrochemical immunosensing of carcinoma embryonic antigen

A novel near-infrared (NIR)-excited photoelectrochemical (PEC) immunosensor based on an ionic liquid functionalized metal organic framework (Yb-MOF) and gold nanoparticles (Au-NPs) was designed for the high-performance determination of carcinoembryonic antigen (CEA). The Yb-MOF was synthesized from the coordination of the Yb3+ metal ion with the 1,1'-(1,5-dihydropyrene-2,7-diyl)bis(3-(4-carboxybenzyl)-1H-imidazol-3-ium) bromide [DDPDBCBIm(Br)2] ionic liquid by a hydrothermal method. To improve the photoelectric conversion efficiency of the Yb-MOF in the NIR region, the surface of the Yb-MOF was integrated with gold nanoparticles (AuNPs) to fabricate a Yb-MOF@AuNP nanocomposite through an in situ reduction of chloroauric acid with sodium borohydride. The NIR photoelectrochemical response of the Yb-MOF@AuNPs at 808 nm was enhanced 4-fold over the pristine Yb-MOF. Subsequently, a photoelectrochemical platform based on the Yb-MOF@AuNPs was constructed for loading the CEA antibody (anti-CEA). After cross-linking with glutaraldehyde followed by blocking with bovine serum albumin, a photoelectrochemical sensor for assaying CEA was fabricated. Upon specifically interacting with CEA, CEA can block the photogenerated electron-hole pair transfer and the mass transfer of ascorbic acid to the sensing interface, thus leading to a decrease in photocurrent response. The photocurrent variation can be used for determining CEA quantitatively. After optimizing the experimental conditions, the photocurrent variations before and after incubation with CEA were linearly correlated with the CEA concentration over the range of 0.005-15 ng mL-1. The detection limit of CEA was calculated to be 0.25 pg mL-1 (S/N = 3). The immunosensor was employed for the measurement of free CEA in clinical serum samples, and the results were very consistent with the values obtained by clinical tests. The NIR PEC immunosensor also demonstrated excellent accuracy and recovery, which corroborates its potential as a practical technique in clinical diagnosis.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Photoelectrochemical aptasensing for thrombin based on exonuclease III-assisted recycling signal amplification and nanoceria enzymatic strategy

In the present work, a capture DNA (c-DNA) was immobilized on the TNA/g-C₃N₄ to develop a sensitive and selective TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor for determining thrombin. With the aid of the specific recognition of anti-thrombin aptamer towards thrombin, ingenious design of hairpin DNA, and exonuclease III-assisted recycling signal amplification, more nanoceria could be assembled on the TNA/g-C₃N₄/c-DNA to form TNA/g-C₃N₄/nanoceria in the presence of thrombin. Due to the oxidase-mimic catalytic efficiency of nanoceria and the oxygen consumption for glucose oxidation, the photoexcited electrons at the conduction band of g-C₃N₄ could be well transferred to that of TNA under visible light irradiation, resulting in the increase of the photocurrent of TNA/g-C₃N₄/nanoceria, and the increase value of photocurrent had a linear relationship with the concentration of thrombin under the optimal conditions. So, the constructed TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor exhibited a satisfactory quantitative range from 0.01 pM to 0.5 nM, low detection limit with 3.4 fM for thrombin determination, and was applied for the human serum analysis successfully with RSD of less than 4.8% and the recovery between 95% and 113%.