Cyclodextrin Rotaxanes and Polyrotaxanes

Reactive Oxygen Species-Triggered Dissociation of a Polyrotaxane-Based Nanochelator for Enhanced Clearance of Systemic and Hepatic Iron

Chronic blood transfusions are used to alleviate anemic symptoms in thalassemia and sickle cell anemia patients but can eventually result in iron overload (IO) and subsequently lead to severe oxidative stress in cells and tissues. Deferoxamine (DFO) is clinically approved to treat transfusional IO, but the use of the iron chelator is hindered by nonspecific toxicity and poor pharmacokinetic (PK) properties in humans, resulting in the need to administer the drug via long-term infusion regimens that can often lead to poor patient compliance. Herein, a nanochelator system that uses the characteristic IO physiological environment to dissociate was prepared through the incorporation of DFO and reactive oxygen species (ROS)-sensitive thioketal groups into an α-cyclodextrin-based polyrotaxane platform (rPR-DFO). ROS-induced dissociation of this nanochelator (ca. 10 nm) into constructs averaging 2 nm in diameter significantly increased urine and fecal elimination of excess iron in vivo. In addition to significantly improved PK properties, rPR-DFO was well-tolerated in mice and no adverse side effects were noted in single high dose or multiple dose acute toxicity studies. The overall features of rPR-DFO as a promising system for iron chelation therapy can be attributed to a combination of the nanochelator's improved PK, favorable distribution to the liver, and ROS-induced dissociation properties into constructs <6 nm for faster renal elimination. This ROS-responsive nanochelator design may serve as a promising alternative for safely prolonging the circulation of DFO and more rapidly eliminating iron chelates from the body in iron chelation therapy regimens requiring repeated dosing of nanochelators.

Cyclodextrin-Based Supramolecular Complexes of Osteoinductive Agents for Dental Tissue Regeneration

Oral tissue regeneration has received growing attention for improving the quality of life of patients. Regeneration of oral tissues such as alveolar bone and widely defected bone has been extensively investigated, including regenerative treatment of oral tissues using therapeutic cells and growth factors. Additionally, small-molecule drugs that promote bone formation have been identified and tested as new regenerative treatment. However, treatments need to progress to realize successful regeneration of oral functions. In this review, we describe recent progress in development of regenerative treatment of oral tissues. In particular, we focus on cyclodextrin (CD)-based pharmaceutics and polyelectrolyte complexation of growth factors to enhance their solubility, stability, and bioactivity. CDs can encapsulate hydrophobic small-molecule drugs into their cavities, resulting in inclusion complexes. The inclusion complexation of osteoinductive small-molecule drugs improves solubility of the drugs in aqueous solutions and increases in vitro osteogenic differentiation efficiency. Additionally, various anionic polymers such as heparin and its mimetic polymers have been developed to improve stability and bioactivity of growth factors. These polymers protect growth factors from deactivation and degradation by complex formation through electrostatic interaction, leading to potentiation of bone formation ability. These approaches using an inclusion complex and polyelectrolyte complexes have great potential in the regeneration of oral tissues.

Mucoadhesive Poloxamer-Based Hydrogels for the Release of HP-β-CD-Complexed Dexamethasone in the Treatment of Buccal Diseases

Oral lichen planus (OLP) is an ongoing and chronic inflammatory disease affecting the mucous membrane of the oral cavity. Currently, the treatment of choice consists in the direct application into the buccal cavity of semisolid formulations containing a corticosteroid molecule to decrease inflammatory signs and symptoms. However, this administration route has shown various disadvantages limiting its clinical use and efficacy. Indeed, the frequency of application and the incorrect use of the preparation may lead to a poor efficacy and limit the treatment compliance. Furthermore, the saliva clearance and the mechanical stress present in the buccal cavity also involve a decrease in the mucosal exposure to the drug. In this context, the design of a new pharmaceutical formulation, containing a steroidal anti-inflammatory, mucoadhesive, sprayable and exhibiting a sustained and controlled release seems to be suitable to overcome the main limitations of the existing pharmaceutical dosage forms. The present work reports the formulation, optimization and evaluation of the mucoadhesive and release properties of a poloxamer 407 thermosensitive hydrogel containing a poorly water-soluble corticosteroid, dexamethasone acetate (DMA), threaded into hydroxypropyl-beta-cyclodextrin (HP-β-CD) molecules. Firstly, physicochemical properties were assessed to ensure suitable complexation of DMA into HP-β-CD cavities. Then, rheological properties, in the presence and absence of various mucoadhesive agents, were determined and optimized. The hydration ratio (0.218-0.191), the poloxamer 407 (15-17 wt%) percentage and liquid-cyclodextrin state were optimized as a function of the gelation transition temperature, viscoelastic behavior and dynamic flow viscosity. Deformation and resistance properties were evaluated in the presence of various mucoadhesive compounds, being the sodium alginate and xanthan gum the most suitable to improve adhesion and mucoadhesion properties. Xanthan gum was shown as the best agent prolonging the hydrogel retention time up to 45 min. Furthermore, xanthan gum has been found as a relevant polymer matrix controlling drug release by diffusion and swelling processes in order to achieve therapeutic concentration for prolonged periods of time.

Visible light-degradable supramolecular gels comprising cross-linked polyrotaxanes capped with trithiocarbonate groups

Visible light-degradable supramolecular gels were designed using polyrotaxanes (PRXs) containing bulky trithiocarbonate groups as stopper molecules that are cleaved by visible light irradiation.

Molecular mobility of polyrotaxane-based biointerfaces alters inflammatory responses and polarization in Kupffer cell lines

Molecular mobility of polyrotaxane-based biointerfaces altered the cellular morphology and gene expression of pro-inflammatory cytokines in the presence of lipopolysaccharide.

Synthesis of Poly(Methyl Methacrylate)-Based Polyrotaxane via Reversible Addition-Fragmentation Chain Transfer Polymerization

A polyrotaxane (PR) with poly(methyl methacrylate) (PMMA) as the main chain polymer was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Because of the special mechanism of RAFT, the suprastructure of a PMMA-based PR is established by synthesizing inclusion complexes of methyl methacrylate and gamma-cyclodextrin (γCD) into the middle of the poly-N-(3-dimethylamino) propyl methacrylamide segments. The presence of threaded γCD was determined via diffusion ordered spectroscopy from the alignment of the mobility of γCD and the main chain polymer. A PMMA-based PR with 2-20% CD coverage and a molecular weight of 7K-60K g/mol of PMMA-based PR was synthesized with a targeted molecular structure by mediating the RAFT polymerization. The PMMA-based PR prepared in this study is expected to be suitable for wide applications of tough materials with good heat resistance. Moreover, the investigation of this synthetical approach opened possibilities for more variety of PR with controllable properties.

Access to molecular complexity. Multicomponent reactions involving five or more components

The evaluation of the significance of a chemical transformation addresses many factors, including such important characteristics as the number of chemical bonds formed in one step, the reaction time, labour intensity, the cost of reactants and catalysts and so on. The amount of waste produced in the reaction has also gained increasing importance in recent years. Multicomponent reactions (MCRs) occupy a special place as a synthetic tool in modern organic chemistry. These reactions allow the synthesis of target products with complex structures, minimizing labour costs. This review summarizes the literature on multicomponent reactions involving five or more components. The data in the review are classified according to the number of reactants participating in the reaction and the types of reactions. It is worth noting that in some cases, these transformations can be a part of a domino process, making this classification difficult, if not impossible. The structural diversity of the reaction products greatly increases with increasing number of components involved in the MCR, which becomes virtually unlimited when using combinations of MCRs. This review highlights the main trends of past decades in the field of MCRs. The last two decades have witnessed an explosive growth in the number of publications in this area of chemistry.

The bibliography includes 309 references.

Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks

Bioprinting researchers agree that "printability" is a key characteristic for bioink development, but neither the meaning of the term nor the best way to experimentally measure it has been established. Furthermore, little is known with respect to the underlying mechanisms which determine a bioink's printability. A thorough understanding of these mechanisms is key to the intentional design of new bioinks. For the purposes of this review, the domain of printability is defined as the bioink requirements which are unique to bioprinting and occur during the printing process. Within this domain, the different aspects of printability and the factors which influence them are reviewed. The extrudability, filament classification, shape fidelity, and printing accuracy of bioinks are examined in detail with respect to their rheological properties, chemical structure, and printing parameters. These relationships are discussed and areas where further research is needed, are identified. This review serves to aid the bioink development process, which will continue to play a major role in the successes and failures of bioprinting, tissue engineering, and regenerative medicine going forward.

Designing and preparing supramolecular fluorescent probe based on carminic acid and γ-cyclodextrins and studying their application for detection of 2-aminobenzidazole

Supramolecular fluorescent probe, which was designed and modeled from carminic acid (CA) and γ-cyclodextrins (γ-CDs), was initially qualified and stated comprehensively. Fluorescence intensity of CA could be dramatically enhanced ∼850 a.u. through formation of a supramolecular fluorescent probe CA@γ-CDs. The super-probe was verified by geometric conformation and molecular docking, and subsequently characterized by FT-IR, NMR, XRD and fluorescence lifetime. Furthermore, the CA@γ-CDs probe was proved on the detection of fungicide 2-aminobenzidazole (2-BZ). Finally, fluorescence performance of CA and the application of the probe for molecular recognition were both motivated by γ-CDs significantly, which could facilitate the fluorescence detection of CA more extensively and precisely.

The intrinsic microstructure of supramolecular hydrogels derived from α-cyclodextrin and pluronic F127: nanosheet building blocks and hierarchically self-assembled structures

Supramolecular hydrogels derived from the self-assembly of α-cyclodextrin with pluronic F127 were found to be built up with polypseudorotaxane nanosheets with a thickness of 30-40 nm and possessed flower-like hierarchically assembled structures. The findings in this work could provide critical guidance for material design for biomedical purposes.

Analysis of High-Molecular-Weight Polyrotaxanes by MALDI-TOF-MS Using 3-Aminoquinoline-Based Ionic Liquid Matrix

Polyrotaxane (PR) is a necklace-like supramolecule composed of cyclic components, such as cyclodextrin (CD), and a threading polymer capped with bulky end groups. PR exhibits peculiar mechanical properties attributed to the intermolecular cross-links with CD. Various CD molecules threaded on a linear PEG chain are often modified with chemical groups to add specific physicochemical properties. In general, the stoichiometry between CD and the PEG chain is a significant parameter that defines the unique physical properties of CD-based polyrotaxane (CD-PR). To date, mass spectrometry (MS) has been applied to investigate the molecular distribution of CD-PR, modifications of CD, and the threaded ratio of CD. However, only molecular weights (MWs) up to several 10s of kDa can be subjected to such analysis, whereas the MW of CD-PR used as industrial materials is much greater. Herein, we applied two ionic liquid matrices composed of 3-aminoquinoline and a high mass detector to analyze PRs using MALDI-TOF-MS. High to very high MW PRs in the range of 90-700 kDa were successfully analyzed using this method. The threaded ratio of CD was estimated from a single MW of CD, PEG, and PR. The ratios obtained were consistent with that obtained using ¹H NMR. Furthermore, a single-stranded form of PR in γ-cyclodextrin threaded PR (γCD-PR) was clearly distinguished from a double-stranded form, which is only possible in γCD -PR because of its large host cavity.

Supramolecular self-healing materials from non-covalent cross-linking host-guest interactions

The introduction of non-covalent bonds is effective for achieving self-healing properties because they can be controlled reversibly. One approach to introduce these bonds into supramolecular materials is use of host-guest interactions. This feature article summarizes the development of supramolecular materials constructed by non-covalent cross-linking through several approaches, such as host-guest interactions between host polymers and guest polymers, 1 : 2-type host-guest interactions, and host-guest interactions from the polymerization of host-guest inclusion complexes. Host-guest interactions show self-healing functions while also enabling stimuli-responsiveness (redox, pH, and temperature). The self-healing function of supramolecular materials is achieved by stress dispersion arising from host-guest interactions when stress is applied. Reversible bonds based on host-guest interactions have tremendous potential to expand the variety of functional materials.

Polypseudorotaxanes of Pluronic® F127 with Combinations of α- and β-Cyclodextrins for Topical Formulation of Acyclovir

Acyclovir (ACV) is one of the most used antiviral drugs for the treatment of herpes simplex virus infections and other relevant mucosal infections caused by viruses. Nevertheless, the low water solubility of ACV limits both its bioavailability and antiviral performance. The combination of block copolymer micelles and cyclodextrins (CDs) may result in polypseudorotaxanes with tunable drug solubilizing and gelling properties. However, the simultaneous addition of various CDs has barely been investigated yet. The aim of this work was to design and characterize ternary combinations of Pluronic® F127 (PF127), αCD and βCD in terms of polypseudorotaxane formation, rheological behavior, and ACV solubilization ability and controlled release. The formation of polypseudorotaxanes between PF127 and the CDs was confirmed by FT-IR spectroscopy, X-ray diffraction, and NMR spectroscopy. The effects of αCD/βCD concentration range (0–7% w/w) on copolymer (6.5% w/w) gel features were evaluated at 20 and 37 °C by rheological studies, resulting in changes of the copolymer gelling properties. PF127 with αCD/βCD improved the solubilization of ACV, maintaining the biocompatibility (hen’s egg test on the chorio-allantoic membrane). In addition, the gels were able to sustain acyclovir delivery. The formulation prepared with similar proportions of αCD and βCD provided a slower and more constant release. The results obtained suggest that the combination of Pluronic with αCD/βCD mixtures can be a valuable approach to tune the rheological features and drug release profiles from these supramolecular gels.

Host-guest interaction of nitroxide radicals with water-soluble pillar[6]arenes

The host-guest interaction of nitroxide radicals with water-soluble pillar[n]arenes was studied for the first time by electron paramagnetic resonance spectroscopy and NMR spectroscopy. Our results showed that this interaction strongly depended on the 4-substituents of nitroxides and the cavity size of pillar[n]arenes. The host-guest interaction with water-soluble pillar[6]arene WP6 effectively increased the thermodynamic and kinetic stability of nitroxide radical 4-AT toward ascorbic acid, thus expanding its potential biomedical applications.

Enhanced Mechanical Strength, Flexibility, and Shape-Restoring Rate of a Drug-Eluting Shape-Memory Polymer by Incorporation of Supramolecular Cross-Linkers

The purpose of this study is to develop mechanically robust soybean oil and polycaprolactone (PC)-based drug-eluting shape memory polymers (SMPs) containing polyrotaxane (PRX) cross-linkers. Essentially, the dynamic PRX cross-linker-containing methacrylate group is introduced to increase the cross-linking density and flexibility of the SMP to overcome its mechanical limitations. It was confirmed that the elongation and cross-linking density of the PRX-incorporated SMP were increased by 2-4 times compared to neat SMP. In addition, those high mechanical properties of the PRX-incorporated SMP could be maintained after the degradation of the PC by the drug-eluting process.

Supramolecular metallacyclic hydrogels with tunable strength switched by host–guest interactions

A new family of supramolecular hydrogels with tunable strength was successfully constructed through a combination of coordination-driven self-assembly, post-assembly polymerization and host–guest interactions.

Nanoparticles decorated with folate based on a site-selective αCD-rotaxanated PEG-b-PCL copolymer for targeted cancer therapy

NPs fabricated from a mixture of PEG-b-PCL and selectively rotaxanated Fol-PEG(αCD)-PCL showed internalisation in KB cells through an active targeting mechanism.

Rotaxanes comprising cyclic phenylenedioxydiacetamides and secondary mono- and bis-dialkylammonium ions: effect of macrocyclic ring size on pseudorotaxane formation

[2]Rotaxanes, stabilized through multiple and cooperative hydrogen bonding system, were synthesized from dialkylammonium ions and macrocycle possessing two phenylenedioxydiacetamide units and appropriate spacers.

Polyrotaxanes created by end-capping polypseudorotaxanes self-assembled from β-CDs with distal azide terminated PHEMA using propargylamine monosubstituted β-CDs

When a distal azide terminated PHEMA was allowed to self-assemble with varying amounts of β-CDs in water, followed by in situ reaction with PA-β-CDs via the CuAAC, linear polyrotaxanes (PRs) and a mixture of linear and hyperbranched PRs were obtained.

Thermo-responsive 3D-printed polyrotaxane monolith

Thermo-responsive 3D-printed hydrogels that are composed of methylated α-cyclodextrin polyrotaxanes have been synthesized through post-3D-printing methylation.

Chiral covalent organic frameworks: design, synthesis and property

Owing to the unique structural features and facile tunability of the subcomponents and channels, chiral COFs show great potential in heterogeneous catalysis, enantioselective separation, and recognition.

Highly viscoelastic films at the water/air interface: α-Cyclodextrin with anionic surfactants

This work showcases the remarkable viscoelasticity of films consisting of α-cyclodextrin (α-CD) and anionic surfactants (S) at the water/air interface, the magnitude of which has not been observed in similar systems. The anionic surfactants employed are sodium salts of a homologous series of n-alkylsulfates (n = 8-14) and of dodecylsulfonate. Our hypothesis was that the very high viscoelasticity can be systematically related to the bulk and interfacial properties of the system. Through resolution of the bulk distribution of species using isothermal titration calorimetry, the high dilatational modulus is related to (α-CD)₂:S₁ inclusion complexes in the bulk with respect to both the bulk composition and temperature. Direct interfacial characterization of α-CD and sodium dodecylsulfate films at 283.15 K using ellipsometry and neutron reflectometry reveals that the most viscoelastic films consist of a highly ordered monolayer of 2:1 complexes with a minimum amount of any other component. The orientation of the complexes in the films and their driving force for adsorption are discussed in the context of results from molecular dynamics simulations. These findings open up clear potential for the design of new functional materials or molecular sensors based on films with specific mechanical, electrical, thermal, chemical, optical or even magnetic properties.

Molecular recognition-directed site-specific release of stem cell differentiation inducers for enhanced joint repair

The remarkable difference in cell type and matrix composition between two connected parts of a joint (cartilage and subchondral bone) makes it challenging to simultaneously regenerate both parts for joint repair. Thus we chemically designed a biphasic hydrogel made of two well-bonded shape-tunable hydrogel phases, termed bone-regenerating hydrogel (BRH) and cartilage-regenerating hydrogel (CRH). The BRH and CRH, encapsulating stem cells, were produced by photo-crosslinking bone and cartilage matrix-mimicking biopolymers and a nanobox (β-cyclodextrin) in situ in the subchondral bone defect and cartilage defect, respectively. The nanoboxes in BRH and CRH were loaded with osteogenic and chondrogenic differentiation inducers (melatonin and kartogenin) by host-guest interactions, respectively. Such interactions directed the sustained phase- and defect site-specific release of the inducers and subsequent site-specific stem cell differentiation into cartilage and bone forming cells for joint repair. The strategy opens up a new chemical approach to biomaterials with phase-specific drug release for tissue repair.

Chaperone-Assisted Host-Guest Interactions Revealed by Single-Molecule Force Spectroscopy

The recent discovery of ultra-high binding affinities in cucurbit[7]uril (CB7)-based host-guest pairs in an aqueous environment has rendered CB7 a rather attractive material in analytical and biomedical applications. Due to the lack of a molecular platform that can follow the same host-guest complex during repetitive mechanical measurements, however, mechanical stabilities of the CB7 system have not been revealed, hindering its potential to rival widely used conjugation pairs, such as streptavidin-biotin. Here, we assembled a DNA template in which a flexible DNA linker was exploited to keep the host (CB7) and guest (adamantane) in proximity. This platform not only increased the efficiency of the single-molecule characterization in optical tweezers but also clearly revealed mechanical features of the same host-guest complex. We found that positively charged adamantane guest demonstrated higher mechanical stability (49 pN) than neutral adamantane (44 pN), a trend consistent with the chemical affinity between guest molecules and the CB7 host. Surprisingly, we found that a hexyl group adjacent to the adamantane served as a chaperone to assist the formation of the adamantane-CB7 pairs. The discovery of an unprecedented chaperone-assisted interaction mechanism provides new approaches to efficiently assemble host-guest-based supramolecules with increased mechanical stabilities, which can be exploited in various biomedical, biosensing, and materials fields.

Exploring and Exploiting the Symmetry-Breaking Effect of Cyclodextrins in Mechanomolecules

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.

Influence of Cyclodextrins on Thermosensitive and Fluorescent Properties of Pyrenyl-Containing PDMAA

A series of pyrenyl-containing PDMAA copolymers were prepared by free radical copolymerization of dimethylacrylamide (DMAA) with pyrenebutanoyloxy ethyl methacrylate (PyBEMA). The structure of as-prepared copolymers was characterized by UV, FT-IR and 1H NMR spectroscopy. The effect of cyclodextrins (α-CD, β-CD and γ-CD) on the thermosensitivity and fluorescence of the copolymers in aqueous solutions were investigated. It was found that the as-prepared copolymers exhibit lower critical solution temperature (LCST)-type thermosensitivity. Cloud point (Tcp) decreases with the increasing molar content of PyBEMA unit in the copolymers. Tcp of the copolymers increases after the CD is added from half molar to equivalent amount relative to pyrenyl moiety, and that further adding twice equivalent CD results in a slight decrease in Tcp. The copolymers exhibit a pyrene emission located at 377 nm and a broad excimer emission centered at 470 nm. The copolymers in water present a stronger excimer emission (Intensity IE) relative to monomer emission (Intensity IM) than that in ethanol. The IE/IM values decrease after the addition of equivalent α-CD, β-CD and γ-CD into the copolymers in aqueous solution, respectively. The IE/IM values abruptly increase as the copolymers' concentration is over 0.2 mg/L whether in ethanol solution or aqueous solution with or without CD, from which can probably be inferred that intra-polymeric pyrene aggregates dominate for solution concentration below 0.2 mg/L and inter-polymeric pyrene aggregates dominate over 0.2 mg/L. Furthermore, the formation of the CD pseudopolyrotaxanes makes it possible to form pyrene aggregates. For high concentration of 5 g/L, the copolymers and their inclusion complexes completely exhibit an excimer emission. The IE values abruptly increased as the temperature went up to Tcp, which indicates that the IE values can be used to research phase separation of polymers.

Cyclodextrin-Based Nanosystems as Drug Carriers for Cancer Therapy

BACKGROUND AND OBJECTIVE

Cyclodextrins have been of great interest as excellent candidates for fabricating versatile nano-drug delivery systems due to their commercial availability, easy functionalization, low immunogenicity, biocompatibility and safety. The possibility of reversible inclusion complex formation between cyclodextrins and various guest molecules in association with versatile exclusive properties of cyclodextrins offer a route towards the fabrication of highly sophisticated nanostructures with enormous potential for cancer treatment.

METHODS AND RESULTS

The current review discusses important recent advances in the fabrication and development of cyclodextrin-based nanostructures for cancer therapy. Firstly, the formation of inclusion complexes between cyclodextrin derivatives and anticancer compounds, as well as their application, are summarized. Secondly, the cyclodextrins -based nanosystems including cyclodextrin-containing polymers, cyclodextrin-based supramolecular necklaces, which consist of polyrotaxanes and polypseudorotaxanes and cyclodextrin based hydrogels accompanied by their applications in cancer treatment are highlighted. In the end, the future perspective of this field is discussed.

CONCLUSION

Numerous investigations in this area pave the way for the flourishing of the next generation of nano-therapeutics towards enhanced cancer therapy.

Template-Free Synthesis of a Phenanthroline-Containing [2]Rotaxane: A Reversible pH-Controllable Molecular Switch

The synthesis of symmetric and asymmetric rotaxanes consisting of neutral axle and ring components without ionic templates is necessary for applications in molecular sensors and molecular switches. A phenanthroline-containing symmetric [2]rotaxane was newly synthesized by inducing hydrogen bonding and π-interaction using a template-free threading-followed-by-stoppering method. The obtained rotaxane serves as a reversible pH-controllable molecular switch.

Synthesis of a [6]rotaxane with singly threaded γ-cyclodextrins as a single stereoisomer

A series of hetero [4]-, [5]- and [6]rotaxanes containing both cucurbit[6]uril (CB[6]) and γ-cyclodextrin (γ-CD) as the macrocyclic components have been synthesized via a threading-followed-by-stoppering approach. Due to the orthogonal binding of CB[6] to ammonium and γ-CD to biphenylene/tetra(ethylene glycol), the [n]rotaxanes display a specific sequence of the interlocked macrocycles. In addition, despite of the asymmetry of γ-CD with respect to the orthogonal plane of the axle, only one stereoisomer of the [6]rotaxane was obtained.

Stable suprachannels via a columnar cyclodimeric ensemble: exchange and matrix of various liquid guests in SCSC fashion

Self-assembly of ZnI₂ with di(isoquinolin-5-yl)isophthalate (L) as a new bidentate N-donor gives rise to discrete crown-shaped M₂L₂ cyclodimers, 3.5CH₃CN·0.7THF@[Zn₂I₄L₂]. These metallacyclodimers are composed of a characteristically eclipsed molecular array, resulting in the formation of unusual 10.0 × 15.1 Ų diameter suprachannels. The suprachannels adsorb/desorb various liquid molecules in a rigid manner, which enables scientists to solve the structures of various liquids. This columnar molecular ensemble is an efficient, tolerant, and reproducible suprachannel matrix for structural determination of general liquid compounds via easy single-crystal-to-single-crystal (SCSC) guest exchange without any desolvation process.