Graphene as a substrate to suppress fluorescence in resonance Raman spectroscopy

Unraveling the Raman Enhancement Mechanism on 1T'-Phase ReS2 Nanosheets

2D transition metal dichalcogenides materials are explored as potential surface-enhanced Raman spectroscopy substrates. Herein, a systematic study of the Raman enhancement mechanism on distorted 1T (1T') rhenium disulfide (ReS₂ ) nanosheets is demonstrated. Combined Raman and photoluminescence studies with the introduction of an Al₂ O₃ dielectric layer unambiguously reveal that Raman enhancement on ReS₂ materials is from a charge transfer process rather than from an energy transfer process, and Raman enhancement is inversely proportional while the photoluminescence quenching effect is proportional to the layer number (thickness) of ReS₂ nanosheets. On monolayer ReS₂ film, a strong resonance-enhanced Raman scattering effect dependent on the laser excitation energy is detected, and a detection limit as low as 10^-9 m can be reached from the studied dye molecules such as rhodamine 6G and methylene blue. Such a high enhancement factor achieved through enhanced charge interaction between target molecule and substrate suggests that with careful consideration of the layer-number-dependent feature and excitation-energy-related resonance effect, ReS₂ is a promising Raman enhancement platform for sensing applications.

Fluorescence Quenching Investigation of Methyl Red Adsorption on Aluminum-Based Metal-Organic Frameworks

The adsorption of methyl red (MR) isomers (ortho, meta, and para) on metal-organic frameworks (MOFs) was investigated by using a fluorescence quenching technique. All three MR isomers were found to quench the fluorescence of MOFs effectively. Nonlinear fluorescence quenching trends were observed in Stern-Volmer plots. A modified nonlinear Stern-Volmer equation with the concepts of multiple adsorption sites, adsorption strength, and quencher accessibility was successfully adopted to fit the fluorescence quenching data. The fitted parameters were correlated with the structural properties of MRs and MOFs. The order of quenching efficiency was found to be m-MR > p-MR > o-MR for all MOFs. This indicates that MR molecules not only adsorb via carboxylate-metal bonding but also adsorb through π-π interactions between the aromatic rings of MR and linker molecules in MOFs. The position of the carboxylate group in MRs and the structure of the linkers in MOFs are the key factors affecting the fluorescence quenching efficiency.

Challenges in application of Raman spectroscopy to biology and materials

Raman spectroscopy has become an essential tool for chemists, physicists, biologists and materials scientists. In this article, we present the challenges in unravelling the molecule-specific Raman spectral signatures of different biomolecules like proteins, nucleic acids, lipids and carbohydrates based on the review of our work and the current trends in these areas. We also show how Raman spectroscopy can be used to probe the secondary and tertiary structural changes occurring during thermal denaturation of protein and lysozyme as well as more complex biological systems like bacteria. Complex biological systems like tissues, cells, blood serum etc. are also made up of such biomolecules. Using mice liver and blood serum, it is shown that different tissues yield their unique signature Raman spectra, owing to a difference in the relative composition of the biomolecules. Additionally, recent progress in Raman spectroscopy for diagnosing a multitude of diseases ranging from cancer to infection is also presented. The second part of this article focuses on applications of Raman spectroscopy to materials. As a first example, Raman spectroscopy of a melt cast explosives formulation was carried out to monitor the changes in the peaks which indicates the potential of this technique for remote process monitoring. The second example presents various modern methods of Raman spectroscopy such as spatially offset Raman spectroscopy (SORS), reflection, transmission and universal multiple angle Raman spectroscopy (UMARS) to study layered materials. Studies on chemicals/layered materials hidden in non-metallic containers using the above variants are presented. Using suitable examples, it is shown how a specific excitation or collection geometry can yield different information about the location of materials. Additionally, it is shown that UMARS imaging can also be used as an effective tool to obtain layer specific information of materials located at depths beyond a few centimeters.

This paper reviews various facets of Raman spectroscopy. This encompasses biomolecule fingerprinting and conformational analysis, discrimination of healthy vs. diseased states, depth-specific information of materials and 3D Raman imaging.

Metallic carbide nanoparticles as stable and reusable substrates for sensitive surface-enhanced Raman spectroscopy

Carbide SERS substrates: nearly monodispersed TaC nanoparticles with a strong plasma resonance effect are synthesized via a magnesium thermal reduction process. As non-noble metal SERS substrates, they offer high sensitivity, outstanding stability, and excellent recyclability.

A Review on Applications of Two-Dimensional Materials in Surface-Enhanced Raman Spectroscopy

Two-dimensional (2D) materials, such as graphene and MoS2, have been attracting wide interest in surface enhancement Raman spectroscopy. This perspective gives an overview of recent developments in 2D materials’ application in surface-enhanced Raman spectroscopy. This review paper focuses on the applications of using bare 2D materials and metal/2D material hybrid substrate for Raman enhancement. The Raman enhancing mechanism of 2D materials will also be discussed. The progress covered herein shows great promise for widespread adoption of 2D materials in SERS application.

In situ semi-quantitative assessment of single-cell viability by resonance Raman spectroscopy

We developed a novel method for quantifying single-cell viability with high selectivity by resonance Raman scattering. This powerful tool will allow researchers to study cellular metabolism at the level of a single cell.

Spotting the differences in two-dimensional materials – the Raman scattering perspective

This review discusses the Raman spectroscopic characterization of 2D materials with a focus on the “differences” from primitive 2D materials.

Preparation of a temperature-responsive block copolymer-anchored graphene oxide@ZnS NPs luminescent nanocomposite for selective detection of 2,4,6-trinitrotoluene

Thermo-sensitive block copolymer decorated GO@ZnS NPs nanocomposite was constructed via π–π stacking interaction as a robust fluorescent sensing platform for the selective detection of TNT.

Wearable energy sources based on 2D materials

This review provides the most recent advances in wearable energy sources based on 2D materials, and highlights the crucial roles 2D materials play in the wearable energy sources.

Raman Enhancement and Photo-Bleaching of Organic Dyes in the Presence of Chemical Vapor Deposition-Grown Graphene

Fluorescent organic dyes photobleach under intense light. Graphene has been shown to improve the photo-stability of organic dyes. In this paper, we investigated the Raman spectroscopy and photo-bleaching kinetics of dyes in the absence/presence of chemical vapor deposition (CVD)-grown graphene. We show that graphene enhances the Raman signal of a wide range of dyes. The photo-bleaching of the dyes was reduced when the dyes were in contact with graphene. In contrast, monolayer hexagonal boron nitride (h-BN) was much less effective in reducing the photo-bleaching rate of the dyes. We attribute the suppression of photo-bleaching to the energy or electron transfer from dye to graphene. The results highlight the potential of CVD graphene as a substrate for protecting and enhancing Raman response of organic dyes.

Block-Copolymer-Templated Hierarchical Porous Carbon Nanostructures with Nitrogen-Rich Functional Groups for Molecular Sensing

The self-assembly of a block copolymer offers access to micellar nanodomains with tunable dimensions and structural diversity through control of such molecular parameters as the volume fraction and molecular mass. We fabricated hierarchical porous carbon (HPC) nanostructures with bundles of aggregated nanospheres and with nitrogen-rich functional groups through pyrolysis of diblock copolymer micelles in multiple layers. The resultant HPC nanostructures with a considerable specific surface area serve as an excellent substrate for surface-enhanced Raman spectroscopy (SERS), coupled with fluorescence quenching, for molecular sensing of physically adsorbed Rhodamine 6G. The abundant nitrogen atoms terminating on the surface of HPC nanostructures play a critical role in promoting a large Raman enhancement generated via a chemical mechanism. Most importantly, the observed enhancement factors show a clear dependence on the mesoscale porosity within HPC nanostructures, indicating that the chemical enhancement can be steadily tuned with control over the interfacial areas as a function of the nanosphere size. The unique architecture of HPC nanostructures based on the construction of a building block of a well-defined network of core-shell nanospheres provides a new design strategy for fabricating SERS substrates.

Covalent-Bonded Reduced Graphene Oxide-Fluorescein Complex as a Substrate for Extrinsic SERS Measurements

When graphene is used as SERS substrates, it contributes to the chemical mechanism (CM) of enhancement of Raman signal, owing to which the detection limit is very low (lower than mM content of probe molecules). The CM of enhancement depends largely on the interactions between the substrate and the probe molecules. Therefore, in this work, we have investigated the possibility of increasing the SERS activity of graphene by improving the interaction between the probe molecule and the graphene substrate by establishing exclusively strong covalent bonding between them. Fluorescein (Fl) was selected as a probe molecule because it is one of the most commonly used fluorophore in bioscience. As a graphene substrate, reduced graphene oxide (rGO) platelets were used. In addition, silver nanoparticles (AgNPs) were added onto the hybrids to further increase the enhancement by electromagnetic mechanism. Highly enhanced Raman signal of Fl onto neat rGO was achieved for micromolar concentration of the probe molecules. This was attributed to the covalent bonding between them, which introduced hole doping to rGO, decreasing the Fermi level of rGO and bringing it more closely to the LUMO of Fl. This induces aligning of their energy levels, resulting in higher contribution of the nonresonance effect to the charge transfer mechanism of enhancement, which, in this case, occurred intramolecularly. When AgNPs were added onto the rGO substrate, the expected enhancement performance was not observed. On the one hand, this was attributed to small size (∼20 nm) of AgNPs and lack of aggregates and, on the other, due to the unusually high contribution of CM determined.

Graphene Oxide Nanoprisms for Sensitive Detection of Environmentally Important Aromatic Compounds with SERS

Recent advances in graphene-based sensors have shown that heavily oxidized (GO) and reduced graphene oxide (rGO) are attractive materials for environmental sensing due to their unique chemical and physical properties. We describe here the fabrication of nanostructured GO assemblies with Ag nanoprisms for improved detection with surface enhanced Raman scattering (SERS). Specifically, 100-μm-sized, periodic-nanoprism-array domains were fabricated on top of the GO layers by GO-assisted lithography (GOAL). The atomically thin GO underlayers are shown to attract cyclic aromatic molecules to the surface, likely via π-π stacking interactions. The close proximity of the analyte to GO and nanoprism (NP) tips effectively suppresses fluorescent background and affords a plausible tertiary enhancement of photon emissions via an electron charge transfer (CT) process. The adsorption of analyte to rGO-NP leads to the appearance and/or shift of several Raman bands, which provided a means to gain molecular insights into the graphene-enhanced scattering process. The analytical merits were characterized with model compound Rhodamine 6G, where the detection limit could reach subnanomolar concentrations. The nanoprism GO substrates also prove effective for SERS multiplex measurement of several legacy aromatic pollutants. Three tetrachlorobiphenyl isomers could be identified from a mixture using their autonomous nonoverlapping molecular fingerprints, and the substrate offers remarkable trace detection of 2,2',3,3'-tetrachlorobiphenyl (PCB-77).

Chemical Vapor Deposition Growth of Linked Carbon Monolayers with Acetylenic Scaffoldings on Silver Foil

Graphdiyne analogs, linked carbon monolayers with acetylenic scaffoldings, are fabricated by adopting low-temperature chemical vapor deposition which provides a route for the synthesis of two-dimensional carbon materials via molecular building blocks. The electrical conductivity of the as-grown films can reach up to 6.72 S cm^-1 . Moreover, the films show potential as promising substrates for fluorescence suppressing and Raman advancement.

Two-Dimensional Nanomaterials for Cancer Nanotheranostics

Emerging nanotechnologies show unprecedented advantages in accelerating cancer theranostics. Among them, two-dimensional nanomaterials (2DNMs) represent a novel type of material with versatile physicochemical properties that have enabled a new horizon for applications in both cancer diagnosis and therapy. Studies have demonstrated that 2DNMs may be used in diverse aspects, including i) cancer detection due to their high propensity towards tumor markers; ii) molecular imaging for guided tumor therapies, and iii) drug and gene loading, photothermal and photodynamic cancer therapies. However, their biomedical applications raise concerns due to the limited understanding of their in vivo metabolism, transformation and possible toxicities. In this comprehensive review, the state-of-the-art development of 2DNMs and their implications for cancer nanotheranostics are presented. The modification strategies to enhance the biocompatibility of 2DNMs are also reviewed.

Strongly enhanced Raman scattering of Cu-phthalocyanine sandwiched between graphene and Au(111)

Graphene and flat gold have both been argued to enhance Raman scattering of molecular adsorbates through a chemical mechanism. Here we show that these two effects can add to each other. For Cu-phthalocyanine in between graphene and Au(111) on mica a Raman enhancement up to 68-fold has been observed.

Self-assembled nanoporous graphene quantum dot-Mn3O4 nanocomposites for surface-enhanced Raman scattering based identification of cancer cells

A nanoporous graphene quantum dot-Mn₃O₄ nano-composite was synthesized, and used as a new platform for surface-enhanced Raman scattering-based identification of cancer cells.

Improving the Selective Efficiency of Graphene-Mediated Enhanced Raman Scattering through Molecular Imprinting

Enhancement of Raman scattering signal through graphene is an important property that could be exploited for producing innovative sensing devices with advanced properties. Because the enhancement of Raman scattering is due to only a chemical mechanism, the amplification of the signal is lower than that one produced by excitation of localized surface plasmons. The combination of a highly selective technique, which is molecular imprinting, with graphene-mediated enhanced Raman scattering, represents a new synergistic approach that we have developed in the present work. The careful material design has allowed obtaining a porous composite embedding exfoliated graphene and molecular cavities specifically designed for recognizing Rhodamine 6G. The molecularly imprinted porous samples have shown a signal enhancement that increases as a function of the number of molecular cavities, which are also accountable for the molecular recognition properties. Environmental ellipsometric porosimetry has shown no substantial difference between molecularly imprinted and not-imprinted films confirming that the signal enhancement of the imprinted samples is due to the molecular cavities. Interestingly, the most efficient sample has shown a Raman enhancement per cavity that exceeds the value of 1 × 10¹² and a remarkable molecular selectivity allowing for a Rhodamine 6G signal amplification 4.5 higher than structural analogues such as Rhodamine B and methylene blue. The robust and flexible matrix ensures a good recyclability of the samples without lack of linear response. These results prove the great potential of molecular imprinting as a general strategy to provide selectivity to GERS-active substrates for a new generation of sensing devices.

Surface-enhanced Raman scattering activities of graphene-wrapped Cu particles by chemical vapor deposition assisted with thermal annealing

We presented a graphene-wrapped Cu particle hybrid system (G@Cu) to be used as a high performance surface-enhanced Raman scattering (SERS) substrate. The Cu particles wrapped by a few-layer graphene shell were directly synthesized on SiO₂/Si by chemical vapor deposition assisted with thermal annealing in a mixture of methane and hydrogen. The detailed explanation on the different morphology of Cu particles induced by different thermal annealing condition was carried out with both qualitative and quantitative analysis and a series of G@Cu 3D models of Cu particles with different shape anisotropy and inter-particle gap were also built for further study of Raman enhancement mechanism. The G@Cu showed fine SERS activities, including the fluorescence quenching effect, the stability of Raman signals, chemical and optical stability, with an enhancement factor (EF) of ~1.5 × 10⁶.

Hybrid Structures for Surface-Enhanced Raman Scattering: DNA Origami/Gold Nanoparticle Dimer/Graphene

A combination of three innovative materials within one hybrid structure to explore the synergistic interaction of their individual properties is presented. The unique electronic, mechanical, and thermal properties of graphene are combined with the plasmonic properties of gold nanoparticle (AuNP) dimers, which are assembled using DNA origami nanostructures. This novel hybrid structure is characterized by means of correlated atomic force microscopy and surface-enhanced Raman scattering (SERS). It is demonstrated that strong interactions between graphene and AuNPs result in superior SERS performance of the hybrid structure compared to their individual components. This is particularly evident in efficient fluorescence quenching, reduced background, and a decrease of the photobleaching rate up to one order of magnitude. The versatility of DNA origami structures to serve as interface for complex and precise arrangements of nanoparticles and other functional entities provides the basis to further exploit the potential of the here presented DNA origami-AuNP dimer-graphene hybrid structures.

Biosensors based on graphene oxide and its biomedical application

Graphene oxide (GO) is one of the most attributed materials for opening new possibilities in the development of next generation biosensors. Due to the coexistence of hydrophobic domain from pristine graphite structure and hydrophilic oxygen containing functional groups, GO exhibits good water dispersibility, biocompatibility, and high affinity for specific biomolecules as well as properties of graphene itself partly depending on preparation methods. These properties of GO provided a lot of opportunities for the development of novel biological sensing platforms, including biosensors based on fluorescence resonance energy transfer (FRET), laser desorption/ionization mass spectrometry (LDI-MS), surface-enhanced Raman spectroscopy (SERS), and electrochemical detection. In this review, we classify GO-based biological sensors developed so far by their signal generation strategy and provide the comprehensive overview of them. In addition, we offer insights into how the GO attributed in each sensor system and how they improved the sensing performance.

Design of Assembled Systems Based on Conjugated Polyphenylene Derivatives and Carbon Nanohorns

Promising materials have been designed and fully characterised by an effective interaction between versatile platforms such as carbon nanohorns (CNHs) and conjugated molecules based on thiophene derivatives. Easy and non-aggressive methods have been described for the synthesis and purification of the final systems. Oligothiophenephenylvinylene (OTP) systems with different geometries and electron density are coupled to the CNHs. A wide range of characterization techniques have been used to confirm the effective interaction between the donor (OTP) and the acceptor (CNH) systems. These hybrid materials show potential for integration into solar cell devices. Importantly, surface-enhanced Raman spectroscopy (SERS) effects are observed without the presence of any metal surface in the system. Theoretical calculations have been performed to study the optimised geometries of the noncovalent interaction between the surface and the organic molecule. The calculations allow information on the monoelectronic energies of HOMO-LUMO orbitals and band gap of different donor systems to be extracted.

Ultrasensitive molecular sensor using N-doped graphene through enhanced Raman scattering

As a novel and efficient surface analysis technique, graphene-enhanced Raman scattering (GERS) has attracted increasing research attention in recent years. In particular, chemically doped graphene exhibits improved GERS effects when compared with pristine graphene for certain dyes, and it can be used to efficiently detect trace amounts of molecules. However, the GERS mechanism remains an open question. We present a comprehensive study on the GERS effect of pristine graphene and nitrogen-doped graphene. By controlling nitrogen doping, the Fermi level (E F) of graphene shifts, and if this shift aligns with the lowest unoccupied molecular orbital (LUMO) of a molecule, charge transfer is enhanced, thus significantly amplifying the molecule's vibrational Raman modes. We confirmed these findings using different organic fluorescent molecules: rhodamine B, crystal violet, and methylene blue. The Raman signals from these dye molecules can be detected even for concentrations as low as 10(-11) M, thus providing outstanding molecular sensing capabilities. To explain our results, these nitrogen-doped graphene-molecule systems were modeled using dispersion-corrected density functional theory. Furthermore, we demonstrated that it is possible to determine the gaps between the highest occupied and the lowest unoccupied molecular orbitals (HOMO-LUMO) of different molecules when different laser excitations are used. Our simulated Raman spectra of the molecules also suggest that the measured Raman shifts come from the dyes that have an extra electron. This work demonstrates that nitrogen-doped graphene has enormous potential as a substrate when detecting low concentrations of molecules and could also allow for an effective identification of their HOMO-LUMO gaps.

The Application of Graphene and Its Derivatives to Energy Conversion, Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom-thick 2D structure with sp(2) hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GR's unique structure, band structure engineering, physical and chemical properties, and recent energy-related progress of GR-based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO2 reduction, dye-sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR-based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy-metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR-based materials in the exciting fields of energy, environment, and bioscience.

A hybrid system with highly enhanced graphene SERS for rapid and tag-free tumor cells detection

By dint of unique physical/chemical properties and bio-compatibility, graphene can work as a building block for a SERS substrate and open up a unique platform for tumor cells detection with high sensitivity. Herein we demonstrate a facile system with highly enhanced surface enhanced Raman spectroscopy of graphene (G-SERS). The system consists of a reduced graphene oxide (rGO) sandwiched by silver and gold nanostructures. Due to the ultrasmall thickness of rGO, the inter-coupling between Ag and Au nanoparticles is precisely controlled and the local field enhancement has been improved to more than 70 times. Associated with the unique chemical mechanism of rGO, the hybrid system has been utilized to identify tumor cells without using any biomarkers. We believe this research will be important for the applications of rGO in cancer screening.

Modulating the Morphology of Gold Graphitic Nanocapsules for Plasmon Resonance-Enhanced Multimodal Imaging

With their unique optical properties and distinct Raman signatures, graphitic nanomaterials can serve as substrates for surface-enhanced Raman spectroscopy (SERS) or provide signal amplification for bioanalysis and detection. However, a relatively weak Raman signal has limited further biomedical applications. This has been addressed by encapsulating gold nanorods (AuNRs) in a thin graphitic shell to form gold graphitic nanocapsules. This step improves plasmon resonance, which enhances Raman intensity, and has the potential for integrating two-photon luminescence (TPL) imaging capability. However, changing the morphology of gold graphitic nanocapsules such that high quality and stability are achieved remains a challenge. To address this task, we herein report a confinement chemical vapor deposition (CVD) method to prepare the construction of AuNR-encapsulated graphitic nanocapsules with these properties. Specifically, through morphological modulation, we (1) achieved higher plasmon resonance with near-IR incident light, thus achieving greater Raman intensity, and (2) successfully integrated two-photon luminescence dual-modal (Raman/TPL) bioimaging capabilities. Cancer-cell-specific aptamers were further modified on the AuNR@G graphitic surface through simple, but strong, π-π interactions to achieve imaging selectivity through differential cancer cell recognition.

Partially reduced graphene oxide based FRET on fiber-optic interferometer for biochemical detection

Fluorescent resonance energy transfer (FRET) with naturally exceptional selectivity is a powerful technique and widely used in chemical and biomedical analysis. However, it is still challenging for conventional FRET to perform as a high sensitivity compact sensor. Here we propose a novel ‘FRET on Fiber’ concept, in which a partially reduced graphene oxide (prGO) film is deposited on a fiber-optic modal interferometer, acting as both the fluorescent quencher for the FRET and the sensitive cladding for optical phase measurement due to refractive index changes in biochemical detection. The target analytes induced fluorescence recovery with good selectivity and optical phase shift with high sensitivity are measured simultaneously. The functionalized prGO film coated on the fiber-optic interferometer shows high sensitivities for the detections of metal ion, dopamine and single-stranded DNA (ssDNA), with detection limits of 1.2 nM, 1.3 μM and 1 pM, respectively. Such a prGO based ‘FRET on fiber’ configuration, bridging the FRET and the fiber-optic sensing technology, may serve as a platform for the realization of series of integrated ‘FRET on Fiber’ sensors for on-line environmental, chemical, and biomedical detection, with excellent compactness, high sensitivity, good selectivity and fast response

Tuning plasmonic and chemical enhancement for SERS detection on graphene-based Au hybrids

Various graphene-based Au nanocomposites have been developed as surface-enhanced Raman scattering (SERS) substrates recently. However, efficient use of SERS has been impeded by the difficulty of tuning SERS enhancement effects induced from chemical and plasmonic enhancement by different preparation methods of graphene. Herein, we developed graphene-based Au hybrids through physical sputtering gold NPs on monolayer graphene prepared by chemical vapor deposition (CVD) as a CVD-G/Au hybrid, as well as graphene oxide-gold (GO/Au) and reduced-graphene oxide (rGO/Au) hybrids prepared using the chemical in situ crystallization growth method. Plasmonic and chemical enhancements were tuned effectively by simple methods in these as-prepared graphene-based Au systems. SERS performances of CVD-G/Au, rGO/Au and GO/Au showed a gradually monotonic increasing tendency of enhancement factors (EFs) for adsorbed Rhodamine 6G (R6G) molecules, which show clear dependence on chemical bonds between graphene and Au, indicating that the chemical enhancement can be steadily controlled by chemical groups in a graphene-based Au hybrid system. Most notably, we demonstrate that the optimized GO/Au was able to detect biomolecules of adenine, which displayed high sensitivity with a detection limit of 10(-7) M as well as good reproducibility and uniformity.

Compact Shielding of Graphene Monolayer Leads to Extraordinary SERS-Active Substrate with Large-Area Uniformity and Long-Term Stability

Surface-enhanced Raman scattering (SERS) can significantly boost the inherently weak Raman scattering signal and provide detailed structural information and binding nature of the molecules on the surface. Despite the long history of this technology, SERS has yet to become a sophisticated analytical tool in practical applications. A major obstacle is the absence of high-quality and stable SERS-active substrate. In this work, we report a monolayer graphene-shielded periodic metallic nanostructure as large-area uniform and long-term stable SERS substrate. The monolayer graphene acting as a corrosion barrier, not only greatly enhanced stability, but also endowed many new features to the substrate, such as alleviating the photo-induced damages and improving the detection sensitivity for certain analytes that are weakly adsorbed on the conventional metallic substrates. Besides, our fabrication strategy were also capable of fabricating the reproducible SERS sensing spots array, which may serve as a promising high-throughput or multi-analyte sensing platform. Taken together, the graphene-shielded SERS substrate holds great promise both in fundamental studies of the SERS effect and many practical fields.

Graphene-based hybrid films for plasmonic sensing

Graphene, a one-atomic-layer-thick planar sheet of sp(2)-bonded carbon configured in a two-dimensional hexagonal lattice, has attracted considerable research interest with regard to sensing-related applications owing to its extraordinary electronic, optical, chemical, and mechanical properties. Graphene plasmonics may be excited in the mid-infrared-to-terahertz regions with high spatial confinement, low loss, and excellent tunability. Meanwhile, graphene can be utilized to tune the plasmonic properties of conventional metallic nanostructures in the visible and near-infrared regions, allowing it to act as a versatile component in various plasmonic applications. This article reviews the recent progress in graphene-based hybrid films used for plasmonic sensing and detection. We particularly emphasize on the unique roles and advantages of graphene in surface-enhanced Raman scattering (SERS) for bare graphene or graphene-metal hybrid films, and plasmonic refractive index (RI) sensing for graphene-metal or graphene-insulator hybrids, among other plasmonic sensing applications. The preparation of graphene-based hybrid films, their functionalization and signal detection techniques are also reviewed. Finally, the perspectives and current challenges in the use of graphene-based hybrid films for plasmonic sensing are outlined.

A fluorescent probe for detection of an intracellular prognostic indicator in early-stage cancer

Cyclin A2 is a promising cancer prognostic indicator, but its intracellular in situ imaging is still a challenging task. This work designs an "off-on" fluorescent probe, which can fluorescently detect intracellular cyclin A2 and distinguish cancer cells. In addition, this work sheds light on the development of future protein biosensors.

Surface enhanced Raman scattering by graphene-nanosheet-gapped plasmonic nanoparticle arrays for multiplexed DNA detection

We have developed a new type of surface enhanced Raman scattering (SERS) substrate with thiolated graphene oxide (tGO) nanosheets sandwiched between two layers of closely packed plasmonic nanoparticles. The trilayered substrate is built up through alternative loading of interfacially assembled plasmonic nanoparticle arrays and tGO nanosheets, followed by coating the nanoparticle surfaces with poly(ethylene glycol) (PEG). Here tGO plays multifunctional roles as a 2D scaffold to immobilized interfacially assembled plasmonic nanoparticles, a nanospacer to create SERS-active nanogaps between two layers of nanoparticle arrays, and a molecule harvester to enrich molecules of interest viaπ-π interaction. In particular, the molecule harvesting capability of the tGO nanospacer and the stealth properties of PEG coating on the plasmonic nanoparticles collectively lead to preferential positioning of selective targets such as aromatic molecules and single-stranded DNA at the SERS-active nanogap hotspots. We have demonstrated that an SERS assay based on the PEGylated trilayered substrate, in combination with magnetic separation, allows for sensitive, multiplexed "signal-off" detection of DNA sequences of bacterial pathogens.

Lighting up the Raman signal of molecules in the vicinity of graphene related materials

Surface enhanced Raman scattering (SERS) is a popular technique to detect the molecules with high selectivity and sensitivity. It has been developed for 40 years, and many reviews have been published to summarize the progress in SERS. Nevertheless, how to make the SERS signals repeatable and quantitative and how to have deeper understanding of the chemical enhancement mechanism are two big challenges. A strategy to target these issues is to develop a Raman enhancement substrate that is flat and nonmetal to replace the conventional rough and metal SERS substrate. At the same time, the newly developed substrate should have a strong interaction with the adsorbate molecules to guarantee strong chemical enhancement. The flatness of the surface allows better control of the molecular distribution and configuration, while the nonmetal surface avoids disturbance of the electromagnetic mechanism. Recently, graphene and other two-dimensional (2D) materials, which have an ideal flat surface and strong chemical interaction with plenty of organic molecules, were developed to be used as Raman enhancement substrates, which can light up the Raman signals of the molecules, and these substrates were demonstrated to be a promising for microspecies or trace species detection. This effect was named "graphene enhanced Raman scattering (GERS)". The GERS technique offers significant advantages for studying molecular vibrations due to the ultraflat and chemically inert 2D surfaces, which are newly available, especially in developing a quantitative and repeatable signal enhancement technique, complementary to SERS. Moreover, GERS is a chemical mechanism dominated effect, which offers a valuable model to study the details of the chemical mechanism. In this Account, we summarize the systematic studies exploring the character of GERS. In addition, as a practical technique, the combination of GERS with a metal substrate incorporates the advantages from both conventional SERS and GERS. The introduction of graphene to the Raman enhancement substrate extended SERS applications in a more controllable and quantitative way. Looking to the future, we expect the combination of the SERS concept with the GERS technology to lead to the solution of some important issues in chemical dynamics and in biological processes monitoring.

Graphene/Cu nanoparticle hybrids fabricated by chemical vapor deposition as surface-enhanced Raman scattering substrate for label-free detection of adenosine

We present a graphene/Cu nanoparticle hybrids (G/CuNPs) system as a surface-enhanced Raman scattering (SERS) substrate for adenosine detection. The Cu nanoparticles wrapped by a monolayer graphene shell were directly synthesized on flat quartz by chemical vapor deposition in a mixture of methane and hydrogen. The G/CuNPs showed an excellent SERS enhancement activity for adenosine. The minimum detected concentration of the adenosine in serum was demonstrated as low as 5 nM, and the calibration curve showed a good linear response from 5 to 500 nM. The capability of SERS detection of adenosine in real normal human urine samples based on G/CuNPs was also investigated and the characteristic peaks of adenosine were still recognizable. The reproducible and the ultrasensitive enhanced Raman signals could be due to the presence of an ultrathin graphene layer. The graphene shell was able to enrich and fix the adenosine molecules, which could also efficiently maintain chemical and optical stability of G/CuNPs. Based on the G/CuNPs system, the ultrasensitive SERS detection of adenosine in varied matrices was expected for the practical applications in medicine and biotechnology.