Solar Driven Water Oxidation by a Bioinspired Manganese Molecular Catalyst

Charge injection into nanostructured TiO2 electrodes from the photogenerated reduced form of a new Ru(ii) polypyridine compound: the “anti-biomimetic” mechanism at work

Two charge injection mechanisms are active in a new dye-TiO₂ assembly, varying the sacrificial donor.

Molecular ruthenium water oxidation catalysts carrying non-innocent ligands: mechanistic insight through structure–activity relationships and quantum chemical calculations

Herein is highlighted how structure–activity relationships can be used to provide mechanistic insight into H₂O oxidation catalysis.

Water oxidation using earth-abundant transition metal catalysts: opportunities and challenges

Catalysts for the oxidation of water are a vital component of solar energy to fuel conversion technologies. This Perspective summarizes recent advances in the field of designing homogeneous water oxidation catalysts (WOCs) based on Mn, Fe, Co and Cu.

Water oxidation catalyzed by molecular di- and nonanuclear Fe complexes: importance of a proper ligand framework

The synthesis of two molecular iron complexes, a dinuclear iron(iii,iii) complex and a nonanuclear iron complex, and their use as water oxidation catalysts is described.

Catalytic Activity and Impedance Behavior of Screen-Printed Nickel Oxide as Efficient Water Oxidation Catalysts

We report that films screen printed from nickel oxide (NiO) nanoparticles and microballs are efficient electrocatalysts for water oxidation under near-neutral and alkaline conditions. Investigations of the composition and structure of the screen-printed films by X-ray diffraction, X-ray absorption spectroscopy, and scanning electron microscopy confirmed that the material was present as the cubic NiO phase. Comparison of the catalytic activity of the microball films to that of films fabricated by using NiO nanoparticles, under similar experimental conditions, revealed that the microball films outperform nanoparticle films of similar thickness owing to a more porous structure and higher surface area. A thinner, less-resistive NiO nanoparticle film, however, was found to have higher activity per Ni atom. Anodization in borate buffer significantly improved the activity of all three films. X-ray photoelectron spectroscopy showed that during anodization, a mixed nickel oxyhydroxide phase formed on the surface of all films, which could account for the improved activity. Impedance spectroscopy revealed that surface traps contribute significantly to the resistance of the NiO films. On anodization, the trap state resistance of all films was reduced, which led to significant improvements in activity. In 1.00 m NaOH, both the microball and nanoparticle films exhibit high long-term stability and produce a stable current density of approximately 30 mA cm(-2) at 600 mV overpotential.

Visible light-driven water oxidation using a covalently-linked molecular catalyst-sensitizer dyad assembled on a TiO2 electrode

The combination of porphyrin as a sensitizer and a ruthenium complex as a water oxidation catalyst (WOC) is promising to exploit highly efficient molecular artificial photosynthetic systems. A covalently-linked ruthenium-based WOC-zinc porphyrin (ZnP) sensitizer dyad was assembled on a TiO₂ electrode for visible-light driven water oxidation. The water oxidation activity was found to be improved in comparison to the reference systems with the simple combination of the individual WOC and ZnP as well as with ZnP solely, demonstrating the advantage of the covalent linking approach over the non-covalent one. More importantly, via vectorial multi-step electron transfer triggered by visible light, the dye-sensitized photoelectrochemical cell (DSPEC) achieved a broader PEC response in the visible region than DSPECs with conventional ruthenium-based sensitizers. Initial incident photon-to-current efficiencies of 18% at 424 nm and 6.4% at 564 nm were attained under monochromatic illumination and an external bias of -0.2 V vs. NHE. Fast electron transfer from the WOC to the photogenerated radical cation of the sensitizer through the covalent linkage may suppress undesirable charge recombination, realizing the moderate performance of water oxidation. X-ray photoelectron spectroscopic analysis of the photoanodes before and after the DSPEC operation suggested that most of the ruthenium species exist at higher oxidation states, implying that the insufficient oxidation potential of the ZnP moiety for further oxidizing the intermediate ruthenium species at the photoanode is at least the bottleneck of the system.

Enhancement Effect of Noble Metals on Manganese Oxide for the Oxygen Evolution Reaction

Developing improved catalysts for the oxygen evolution reaction (OER) is key to the advancement of a number of renewable energy technologies, including solar fuels production and metal air batteries. In this study, we employ electrochemical methods and synchrotron techniques to systematically investigate interactions between metal oxides and noble metals that lead to enhanced OER catalysis for water oxidation. In particular, we synthesize porous MnOx films together with nanoparticles of Au, Pd, Pt, or Ag and observe significant improvement in activity for the combined catalysts. Soft X-ray absorption spectroscopy (XAS) shows that increased activity correlates with increased Mn oxidation states to 4+ under OER conditions compared to bare MnOx, which exhibits minimal OER current and remains in a 3+ oxidation state. Thickness studies of bare MnOx films and of MnOx films deposited on Au nanoparticles reveal trends suggesting that the enhancement in activity arises from interfacial sites between Au and MnOx.

Immobilization of a Molecular Ruthenium Catalyst on Hematite Nanorod Arrays for Water Oxidation with Stable Photocurrent

Photoelectrochemical (PEC) cells for light-driven water splitting are prepared using hematite nanorod arrays on conductive glass as the photoanode. These devices improve the photocurrent of the hematite-based photoanode for water splitting, owing to fewer surface traps and decreased electron recombination resulting from the one-dimensional structure. By employing a molecular ruthenium co-catalyst, which contains a strong 2,6-pyridine-dicarboxylic acid anchoring group at the hematite photoanode, the photocurrent of the PEC cell is enhanced with high stability for over 10 000 s in a 1 m KOH solution. This approach can pave a route for combining one-dimensional nanomaterials and molecular catalysts to split water with high efficiency and stability.

Light-driven generation of hydrogen: New chromophore dyads for increased activity based on Bodipy dye and Pt(diimine)(dithiolate) complexes

New dyads consisting of a strongly absorbing Bodipy (dipyrromethene-BF2) dye and a platinum diimine dithiolate (PtN2S2) charge transfer (CT) chromophore have been synthesized and studied in the context of the light-driven generation of H2 from aqueous protons. In these dyads, the Bodipy dye is bonded directly to the benzenedithiolate ligand of the PtN2S2 CT chromophore. Each of the new dyads contains either a bipyridine (bpy) or phenanthroline (phen) diimine with an attached functional group that is used for binding directly to TiO2 nanoparticles, allowing rapid electron photoinjection into the semiconductor. The absorption spectra and cyclic voltammograms of the dyads show that the spectroscopic and electrochemical properties of the dyads are the sum of the individual chromophores (Bodipy and the PtN2S2 moieties), indicating little electronic coupling between them. Connection to TiO2 nanoparticles is carried out by sonication leading to in situ attachment to TiO2 without prior hydrolysis of the ester linking groups to acids. For H2 generation studies, the TiO2 particles are platinized (Pt-TiO2) so that the light absorber (the dyad), the electron conduit (TiO2), and the catalyst (attached colloidal Pt) are fully integrated. It is found that upon 530 nm irradiation in a H2O solution (pH 4) with ascorbic acid as an electron donor, the dyad linked to Pt-TiO2 via a phosphonate or carboxylate attachment shows excellent light-driven H2 production with substantial longevity, in which one particular dyad [4(bpyP)] exhibits the highest activity, generating ∼ 40,000 turnover numbers of H2 over 12 d (with respect to dye).

Water splitting with polyoxometalate-treated photoanodes: enhancing performance through sensitizer design

Visible light driven water oxidation has been demonstrated at near-neutral pH using photoanodes based on nanoporous films of TiO₂, polyoxometalate (POM) water oxidation catalyst [{Ru₄O₄(OH)₂(H₂O)₄}(γ-SiW₁₀O₃₆)₂]^10- (1), and both known photosensitizer [Ru(bpy)₂(H₄dpbpy)]²⁺ (P2) and the novel crown ether functionalized dye [Ru(5-crownphen)₂(H₂dpbpy)](H₂2). Both triads, containing catalyst 1, and catalyst-free dyads, produce O₂ with high faradaic efficiencies (80 to 94%), but presence of catalyst enhances quantum yield by up to 190% (maximum 0.39%). New sensitizer H₂2 absorbs light more strongly than P2, and increases O₂ quantum yields by up to 270%. TiO₂-2 based photoelectrodes are also more stable to desorption of active species than TiO₂-P2: losses of catalyst 1 are halved when pH > TiO₂ point-of-zero charge (pzc), and losses of sensitizer reduced below the pzc (no catalyst is lost when pH < pzc). For the triads, quantum yields of O₂ are higher at pH 5.8 than at pH 7.2, opposing the trend observed for 1 under homogeneous conditions. This is ascribed to lower stability of the dye oxidized states at higher pH, and less efficient electron transfer to TiO₂, and is also consistent with the 4^th1-to-dye electron transfer limiting performance rather than catalyst TOF_max. Transient absorption reveals that TiO₂-2-1 has similar 1^st electron transfer dynamics to TiO₂-P2-1, with rapid (ps timescale) formation of long-lived TiO₂(e^-)-2-1(h⁺) charge separated states, and demonstrates that metallation of the crown ether groups (Na⁺/Mg²⁺) has little or no effect on electron transfer from 1 to 2. The most widely relevant findings of this study are therefore: (i) increased dye extinction coefficients and binding stability significantly improve performance in dye-sensitized water splitting systems; (ii) binding of POMs to electrode surfaces can be stabilized through use of recognition groups; (iii) the optimal homogeneous and TiO₂-bound operating pHs of a catalyst may not be the same; and (iv) dye-sensitized TiO₂ can oxidize water without a catalyst.

Hybrid photocathodes for solar fuel production: coupling molecular fuel-production catalysts with solid-state light harvesting and conversion technologies

Artificial photosynthesis is described as the great scientific and moral challenge of our time. We imagine a future where a significant portion of our energy is supplied by such technologies. However, many scientific, engineering and policy challenges must be addressed for this realization. Scientific challenges include the development of effective strategies to couple light absorption, electron transfer and catalysis for efficient conversion of light energy to chemical energy as well as the construction and study of structurally diverse assemblies to carry out these processes. In this article, we review recent efforts from our own research to develop a modular approach to interfacing molecular fuel-production catalysts to visible-light-absorbing semiconductors and discuss the role of the interfacing material as a protection layer for the catalysts as well as the underpinning semiconductor. In concluding, we briefly discuss the potential benefits of a globally coordinated project on artificial photosynthesis that interfaces teams of scientists, engineers and policymakers. Further, we offer cautions that such a large interconnected organization should consider. This article is inspired by, and draws largely from, an invited presentation given by the corresponding author at the Royal Society at Chicheley Hall, home of the Kavli Royal Society International Centre, Buckinghamshire on the themed meeting topic: 'Do we need a global project on artificial photosynthesis?'

Dye-sensitized PS-b-P2VP-templated nickel oxide films for photoelectrochemical applications

Moving from homogeneous water-splitting photocatalytic systems to photoelectrochemical devices requires the preparation and evaluation of novel p-type transparent conductive photoelectrode substrates. We report here on the sensitization of polystyrene-block-poly-(2-vinylpyridine) (PS-b-P2VP) diblock copolymer-templated NiO films with an organic push-pull dye. The potential of these new templated NiO film preparations for photoelectrochemical applications is compared with NiO material templated by F108 triblock copolymers. We conclude that NiO films are promising materials for the construction of dye-sensitized photocathodes to be inserted into photoelectrochemical (PEC) cells. However, a combined effort at the interface between materials science and molecular chemistry, ideally funded within a Global Artificial Photosynthesis Project, is still needed to improve the overall performance of the photoelectrodes and progress towards economically viable PEC devices.

An electronic approach to minimising moisture-associated skin damage in ostomy patients

Marked developments in the design of ostomy appliances in recent years have revolutionised stoma care and management but the prevalence of peristomal skin complications continues to be problematic with incidence rates ranging from 10% to 70%. Despite requisite pre and post-operative education for new patients, complications continue to arise - even under the close supervision of specialist nurses. Prolonged exposure of the skin to high pH stoma effluent is widely accepted as a key contributor to the onset of moisture-associated skin disease and it is our hypothesis that a "smart wafer", employing electrochemical manipulation of local pH, could mitigate some of the issues currently plaguing ostomy management. Current electrochemical research strategies translatable to stoma care are presented and their possible implementations critically appraised.

Visible photoelectrochemical water splitting into H2 and O2 in a dye-sensitized photoelectrosynthesis cell

A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO2/TiO2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore-catalyst assembly. The assembly, [(4,4'-(PO3H2)2bpy)2Ru(4-Mebpy-4'-bimpy)Ru(tpy)(OH2)](4+) ([Ru(a) (II)-Ru(b) (II)-OH2](4+), combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al2O3 or TiO2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO2/TiO2|-[Ru(a) (II)-Ru(b) (II)-OH2](4+)(Al2O3 or TiO2) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H2 and O2. The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO2/TiO2 core/shell compared with nanoITO/TiO2 with the same assembly results in photocurrent enhancements of ∼ 5. Systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm(2) with 445-nm, ∼ 90-mW/cm(2) illumination in a phosphate buffer at pH 7.

Water oxidation by manganese oxides formed from tetranuclear precursor complexes: the influence of phosphate on structure and activity

Two types of manganese oxides have been prepared by hydrolysis of tetranuclear Mn(iii) complexes in the presence or absence of phosphate ions. The oxides have been characterized structurally using X-ray absorption spectroscopy and functionally by O2 evolution measurements. The structures of the oxides prepared in the absence of phosphate are dominated by di-μ-oxo bridged manganese ions that form layers with limited long-range order, consisting of edge-sharing MnO6 octahedra. The average manganese oxidation state is +3.5. The structure of these oxides is closely related to other manganese oxides reported as water oxidation catalysts. They show high oxygen evolution activity in a light-driven system containing [Ru(bpy)3](2+) and S2O8(2-) at pH 7. In contrast, the oxides formed by hydrolysis in the presence of phosphate ions contain almost no di-μ-oxo bridged manganese ions. Instead the phosphate groups are acting as bridges between the manganese ions. The average oxidation state of manganese ions is +3. This type of oxide has much lower water oxidation activity in the light-driven system. Correlations between different structural motifs and the function as a water oxidation catalyst are discussed and the lower activity in the phosphate containing oxide is linked to the absence of protonable di-μ-oxo bridges.

Cooperative effects in homogenous water oxidation catalysis by mononuclear ruthenium complexes

The homogenous water oxidation catalysis by [Ru(terpy)(bipy)Cl](+) (1) and [Ru(terpy)(Me2bipy)Cl](+) (2) (terpy = 2,2':6',2''-terpyridine, bipy = 2,2'-bipyridine, Me2bipy = 4,4'-dimethyl-2,2'-bipyridine) under the influence of two redox mediators [Ru(bipy)3](2+) (3) and [Ru(phen)2(Me2bipy)](2+) (4) (phen = 1,10-phenanthroline) was investigated using Ce(4+) as sacrificial oxidant. Oxygen evolution experiments revealed that mixtures of both 2-4 and 2-3 produced more molecular oxygen than catalyst 2 alone. In contrast, the combination of mediator 4 and catalyst 1 resulted in a lower catalytic performance of 1. Measurements of the temporal change in the intensity of a UV transition at 261 nm caused by the addition of four equivalents of Ce(4+) to 2 revealed three distinctive regions-suggested to correspond to the stepwise processes: (i) [Ru(IV)=O](2+) → [Ru(V)=O](3+); (ii) [Ru(V)=O](3+) → [Ru(III)-(OOH)](2+); and (iii) [Ru(III)-(OOH)](2+) → [Ru(II)-OH2](2+). UV-Visible spectrophotometric experiments on the 1-4 and 2-4 mixtures, also carried out with four equivalents of Ce(4+), demonstrated a faster [Ru(phen)2(Me2bipy)](3+) → [Ru(phen)2(Me2bipy)](2+) reduction rate in 2-4 than that observed for the 1-4 combination. Cyclic voltammetry data measured for the catalysts and the mixtures revealed a coincidence in the potentials of the Ru(II)/Ru(III) redox process of mediators 3 and 4 and the predicted [Ru(IV)=O](2+)/[Ru(V)=O](3+) potential of catalyst 2. In contrast, the [Ru(IV)=O](2+)/[Ru(V)=O](3+) process for catalyst 1 was found to occur at a higher potential than the Ru(II)/Ru(III) redox process for 4. Both the spectroscopic and electrochemical experiments provide evidence that the interplay between the mediator and the catalyst is an important determinant of the catalytic activity.

Distribution of manganese species in an oxidative dimerization reaction of a bis-terpyridine mononuclear manganese (II) complex and their heterogeneous water oxidation activities

Heterogeneous water oxidation catalyses were studied as a synthetic model of oxygen evolving complex (OEC) in photosynthesis using mica adsorbing various manganese species. Distribution of manganese species formed in the oxidative dimerization reaction of [Mn(II)(terpy)2](2+) (terpy=2,2':6',2″-terpyridine) (1') with various oxidants in water was revealed. 1' was stoichiometrically oxidized to form di-μ-oxo dinuclear manganese complex, [(OH2)(terpy)Mn(III)(μ-O)2Mn(IV)(terpy)(OH2)](3+) (1) by KMnO4 as an oxidant. When Oxone and Ce(IV) oxidants were used, the further oxidation of 1 to [(OH2)(terpy)Mn(IV)(μ-O)2Mn(IV)(terpy)(OH2)](4+) (2) was observed after the oxidative dimerization reaction of 1'. The mica adsorbates with various composition of 1', 1 and 2 were prepared by adding mica suspension to the various oxidant-treated solutions followed by filtration. The heterogeneous water oxidation catalysis by the mica adsorbates was examined using a Ce(IV) oxidant. The observed catalytic activity of the mica adsorbates corresponded to a content of 1 (1ads) adsorbed on mica for KMnO4- and Oxone-treated systems, indicating that 1' (1'ads) and 2 (2ads) adsorbed on mica do not work for the catalysis. The kinetic analysis suggested that 1ads works for the catalysis through cooperation with adjacent 1ads or 2ads, meaning that 2ads assists the cooperative catalysis by 1ads though 2ads is not able to work for the catalysis alone. For the Ce(IV)-treated system, O2 evolution was hardly observed although the sufficient amount of 1ads was contained in the mica adsorbates. This was explained by the impeded penetration of Ce(IV) ions (as an oxidant for water oxidation) into mica by Ce(3+) cations (generated in oxidative dimerization of 1') co-adsorbed with 1ads.

Enhancing catalytic activity by narrowing local energy gaps--X-ray studies of a manganese water oxidation catalyst

Changes in the local electronic structure of the Mn 3d orbitals of a Mn catalyst derived from a dinuclear Mn(III) complex during the water oxidation cycle were investigated ex situ by X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS) analyses. Detailed information about the Mn 3d orbitals, especially the local HOMO-LUMO gap on Mn sites revealed by RIXS analyses, indicated that the enhancement in catalytic activity (water oxidation) originated from the narrowing of the local HOMO-LUMO gap when electrical voltage and visible light illumination were applied simultaneously to the Mn catalytic system.

How a [Co(IV) a bond and a half O](2+) fragment oxidizes water: involvement of a biradicaloid [Co(II)-(⋅O⋅)](2+) species in forming the O-O bond

The mechanism of water oxidation performed by a recently discovered cobalt complex [Co(Py5)(OH2)](ClO4)2 (1; Py5=2,6-(bis(bis-2-pyridyl)-methoxymethane)pyridine) was examined using quantum chemical models based on density functional theory. The computer models were first benchmarked against the experimental cyclic voltammetry data to identify the catalytically competent resting state of the catalyst, which was thought to contain a Co(IV) -oxyl complex. The electronic structure calculations suggest that the low-spin doublet state is energetically most favorable, but the catalytically most active species is the intermediate-spin quartet complex that is almost isoenergetic with the doublet state. The electronic structure of the quartet state shows significant spin polarization on the terminal oxygen atom, which is consistent with an intramolecular electron transfer from the oxygen to the metal. Based on the calculated spin densities, the formally [Co(IV) a bond and a half O] can be viewed as a biradicaloid [Co(II)-(⋅O⋅)](2+), that is, a cobalt-oxene moiety. This electronic structure is reminiscent of many other systems where similar electronic patterns were proposed to be responsible for the oxidative reactivity. In this context, this first-row transition-metal system constitutes a logical extension, because the oxyl-radical character is maximized by using the more easily accessible high-spin configurations in which two half-filled Co-dπ orbitals can work in concert to maximize the oxyl-radical character to ultimately afford a new reactive intermediate that can be characterized as carrying a biradicaloid oxene moiety with a formal oxidation state of zero. This conceptual proposal for the catalytically active species provides a plausible rationale for the remarkable oxidative reactivity.

Microcontact-printing-assisted access of graphitic carbon nitride films with favorable textures toward photoelectrochemical application

An "ink" (cyanamide) infiltrated anodic aluminum oxide (AAO) stamp is found capable of printing carbon nitride films featuring regular microstructures of the stamp onto the substrates via in situ "chemical vapor deposition". A photocurrent density of 30.2 μA cm(-2 --) at 1.23 VRHE is achieved for a film on a conductive substrate, which is so far the highest value for pure carbon nitride based photoelectrochemical devices.

Remarkable effect of Pt nanoparticles on visible light-induced oxygen generation from water catalysed by perovskite oxides

Oxidation of water is a challenging process with a positive free energy change and it is purposeful to find good catalysts to facilitate the process. While the perovskite oxides, LaCoO3 and LaMnO3, are good electron transfer catalysts in artificial photosynthesis to produce oxygen by the oxidation of water, the electron transfer is further favoured by the presence of platinum nanoparticles, causing a substantial increase in oxygen evolution.

Metal-free organic sensitizers for use in water-splitting dye-sensitized photoelectrochemical cells

Solar fuel generation requires the efficient capture and conversion of visible light. In both natural and artificial systems, molecular sensitizers can be tuned to capture, convert, and transfer visible light energy. We demonstrate that a series of metal-free porphyrins can drive photoelectrochemical water splitting under broadband and red light (λ > 590 nm) illumination in a dye-sensitized TiO2 solar cell. We report the synthesis, spectral, and electrochemical properties of the sensitizers. Despite slow recombination of photoinjected electrons with oxidized porphyrins, photocurrents are low because of low injection yields and slow electron self-exchange between oxidized porphyrins. The free-base porphyrins are stable under conditions of water photoelectrolysis and in some cases photovoltages in excess of 1 V are observed.

Effects of morphology and exposed facets of α-Fe2O3 nanocrystals on photocatalytic water oxidation

The catalytic activity of α-Fe₂O₃ nanocubes, nanoplates, nanoflakes and nanoparticles for visible light-driven water oxidation is strongly morphology-dependent; α-Fe₂O₃ nanocubes with exposed {012} facets exhibit far higher activity than nanosheets with exposed {001} facets.

Earth-abundant metal complexes as catalysts for water oxidation; is it homogeneous or heterogeneous?

This minireview focuses on the aspects that determine whether particular catalysts for the oxidation of water are homogeneous or heterogeneous.

Mechanism for O-O bond formation in a biomimetic tetranuclear manganese cluster--A density functional theory study

Density functional theory calculations have been used to study the reaction mechanism of water oxidation catalyzed by a tetranuclear Mn-oxo cluster Mn4O4L6 (L=(C6H4)2PO4(-)). It is proposed that the O-O bond formation mechanism is different in the gas phase and in a water solution. In the gas phase, upon phosphate ligand dissociation triggered by light absorption, the O-O bond formation starting with both the Mn4(III,III,IV,IV) and Mn4(III,IV,IV,IV) oxidation states has to take place via direct coupling of two bridging oxo groups. The calculated barriers are 42.3 and 37.1 kcal/mol, respectively, and there is an endergonicity of more than 10 kcal/mol. Additional photons are needed to overcome these large barriers. In water solution, water binding to the two vacant sites of the Mn ions, again after phosphate dissociation triggered by light absorption, is thermodynamically and kinetically very favorable. The catalytic cycle is suggested to start from the Mn4(III,III,III,IV) oxidation state. The removal of three electrons and three protons leads to the formation of a Mn4(III,IV,IV,IV)-oxyl radical complex. The O-O bond formation then proceeds via a nucleophilic attack of water on the Mn(IV)-oxyl radical assisted by a Mn-bound hydroxide that abstracts a proton during the attack. This step was calculated to be rate-limiting with a total barrier of 29.2 kcal/mol. This is followed by proton-coupled electron transfer, O2 release, and water binding to start the next catalytic cycle.

Photosystem II like water oxidation mechanism in a bioinspired tetranuclear manganese complex

The synthesis of Mn-based catalysts to mimic the structural and catalytic properties of the oxygen-evolving complex in photosystem II is a long-standing goal for researchers. An interesting result in this field came with the synthesis of a Mn complex that enables water oxidation driven by the mild single-electron oxidant [Ru(bpy)3](3+). On the basis of hybrid density functional calculations, we herein propose a water oxidation mechanism for this bioinspired Mn catalyst, where the crucial O-O bond formation proceeds from the formal Mn4(IV,IV,IV,V) state by direct coupling of a Mn(IV)-bound terminal oxyl radical and a di-Mn bridging oxo group, a mechanism quite similar to the presently leading suggestion for the natural system. Of importance here is that the designed ligand is shown to be redox-active and can therefore store redox equivalents during the catalytic transitions, thereby alleviating the redox processes at the Mn centers.