Protein drug stability: a formulation challenge

Probing protein aggregation at buried interfaces: distinguishing between adsorbed protein monomers, dimers, and a monomer-dimer mixture in situ

Protein adsorption on surfaces greatly impacts many applications such as biomedical materials, anti-biofouling coatings, bio-separation membranes, biosensors, antibody protein drugs etc. For example, protein drug adsorption on the widely used lubricant silicone oil surface may induce protein aggregation and thus affect the protein drug efficacy. It is therefore important to investigate the molecular behavior of proteins at the silicone oil/solution interface. Such an interfacial study is challenging because the targeted interface is buried. By using sum frequency generation vibrational spectroscopy (SFG) with Hamiltonian local mode approximation method analysis, we studied protein adsorption at the silicone oil/protein solution interface in situ in real time, using bovine serum albumin (BSA) as a model. The results showed that the interface was mainly covered by BSA dimers. The deduced BSA dimer orientation on the silicone oil surface from the SFG study can be explained by the surface distribution of certain amino acids. To confirm the BSA dimer adsorption, we treated adsorbed BSA dimer molecules with dithiothreitol (DTT) to dissociate these dimers. SFG studies on adsorbed BSA after the DTT treatment indicated that the silicone oil surface is covered by BSA dimers and BSA monomers in an approximate 6 : 4 ratio. That is to say, about 25% of the adsorbed BSA dimers were converted to monomers after the DTT treatment. Extensive research has been reported in the literature to determine adsorbed protein dimer formation using ex situ experiments, e.g., by washing off the adsorbed proteins from the surface then analyzing the washed-off proteins, which may induce substantial errors in the washing process. Dimerization is a crucial initial step for protein aggregation. This research developed a new methodology to investigate protein aggregation at a solid/liquid (or liquid/liquid) interface in situ in real time using BSA dimer as an example, which will greatly impact many research fields and applications involving interfacial biological molecules.

Assessment of Therapeutic Antibody Developability by Combinations of In Vitro and In Silico Methods

Although antibodies have become the fastest-growing class of therapeutics on the market, it is still challenging to develop them for therapeutic applications, which often require these molecules to withstand stresses that are not present in vivo. We define developability as the likelihood of an antibody candidate with suitable functionality to be developed into a manufacturable, stable, safe, and effective drug that can be formulated to high concentrations while retaining a long shelf life. The implementation of reliable developability assessments from the early stages of antibody discovery enables flagging and deselection of potentially problematic candidates, while focussing available resources on the development of the most promising ones. Currently, however, thorough developability assessment requires multiple in vitro assays, which makes it labor intensive and time consuming to implement at early stages. Furthermore, accurate in vitro analysis at the early stage is compromised by the high number of potential candidates that are often prepared at low quantities and purity. Recent improvements in the performance of computational predictors of developability potential are beginning to change this scenario. Many computational methods only require the knowledge of the amino acid sequences and can be used to identify possible developability issues or to rank available candidates according to a range of biophysical properties. Here, we describe how the implementation of in silico tools into antibody discovery pipelines is increasingly offering time- and cost-effective alternatives to in vitro experimental screening, thus streamlining the drug development process. We discuss in particular the biophysical and biochemical properties that underpin developability potential and their trade-offs, review various in vitro assays to measure such properties or parameters that are predictive of developability, and give an overview of the growing number of in silico tools available to predict properties important for antibody development, including the CamSol method developed in our laboratory.

“Spear and Shield in One” Nanochaperone Enables Protein to Navigate Multiple Biological Barriers for Enhanced Tumor Synergistic Therapy

Protein therapeutics have been viewed as powerful candidates for cancer treatment by virtue of highly specific bioactivity and minimized adverse effects. However, the intracellular delivery of protein drugs remains enormously...

Analysis of Proteins, Biologics, and Nanoparticles in Biological Fluids Using Asymmetrical Flow Field-Flow Fractionation

With the increasing interest in biopharmaceuticals such as proteins, antibodies, and nucleic acids, there is a corresponding increase in the need for characterizing such components. Much effort is spent on characterization in the early drug development phases as well as during formulation development and quality control. One parameter that is commonly investigated is the size distribution of the macromolecular components to deduce if there is aggregation or degradation occurring, if conformational changes occur, or if there are interactions with excipients. While the properties of the protein drug in the buffer system or in the pharmaceutical formulation are important, possibly even more interesting are the properties of the drug once it enters the body. Size characterization of macromolecules in biological fluids has traditionally been an area hampered by the complexity of the matrix. The large amount of indigenous components can interfere with commonly applied analytical techniques for size characterization. However, the separation technique asymmetrical flow field-flow fractionation (AF4) has recently shown increasing applicability for the characterization of components in blood plasma and serum. This article reviews some aspects of applying AF4 to plasma, serum, milk, and cerebrospinal fluid in the field of analysis and characterization of proteins, biologics, and nanoparticles in biological fluids.

Dual Functional Amphiphilic Sugar-Coated AIE-Active Fluorescent Organic Nanoparticles for the Monitoring and Inhibition of Insulin Amyloid Fibrillation Based on Carbohydrate-Protein Interactions

Amyloid-related diseases, such as Alzheimer's disease, are all considered to be related to the deposition of amyloid fibrils in the body. Insulin is a protein hormone that easily undergoes aggregation...

Co-Delivery of Paclitaxel and shMCL-1 by Folic Acid-Modified Nonviral Vector to Overcome Cancer Chemotherapy Resistance

Acquired chemoresistance presents a major clinical impediment, which is an urgent problem to be solved. Interestingly, myeloma cell leukemia-1 (MCL-1) and folate receptor expression levels are higher in chemotherapy-resistant patients than in pretreatment patients. In this study, a multifunctional folic acid (FA)-targeting core-shell structure is presented for simultaneous delivery of shMCL-1 and paclitaxel (PTX). The transfection efficiency of shMCL-1 with the FA-targeting delivery system is higher than with a nontargeting delivery system in Skov3 and A2780T cells. The FA-targeting system significantly inhibits cell growth, blocks cell cycles, and promotes apoptosis of cancer cells in vitro. The mechanisms involved in inhibiting growth are related to Bcl-2/Bax and cdc2/Cyclin B1 pathways. An analysis of RNA sequencing suggests that shMCL-1 reverses chemoresistance through regulating genes such as regulator of chromosome condensation 2 (RCC2). The synergetic effect of shMCL-1 and PTX effectively inhibits tumor growth in both PTX-resistant and normal cancer models by inducing tumor apoptosis, inhibiting proliferation, and limiting tumor angiogenesis. The study results indicate that a FA-targeting delivery system combining shMCL-1 with PTX can simultaneously target tumor sites and restore the sensitivity of chemotherapy-resistant cancer to PTX. These findings have important implications for patients with normal or PTX-resistant cancer.

Expanding the toolbox for predictive parameters describing antibody stability considering thermodynamic and kinetic determinants

PURPOSE

Introduction of the activation energy (E_a) as a kinetic parameter to describe and discriminate monoclonal antibody (mAb) stability.

METHODS

E_a is derived from intrinsic fluorescence (IF) unfolding thermograms. An apparent irreversible three-state fit model based on the Arrhenius integral is developed to determine E_a of respective unfolding transitions. These activation energies are compared to the thermodynamic parameter of van´t Hoff enthalpies (∆H_vh). Using a set of 34 mAbs formulated in four different formulations, both the apparent thermodynamic and kinetic parameters together with apparent melting temperatures are correlated collectively with each other to storage stabilities to evaluate its predictive power with respect to long-term effects potentially reflected in shelf-life.

RESULTS

E_a allows for the discrimination of (i) different parent mAbs, (ii) different variants that originate from parent mAbs, and (iii) different formulations. Interestingly, we observed that the E_a of the CH₂ unfolding transition shows strongest correlations with monomer and aggregate content after storage at accelerated and stress conditions when collectively compared to ∆H_vh and T_m of the CH₂ transition. Moreover, the predictive parameters determined for the CH₂ domain show generally stronger correlations with monomer and aggregate content than those derived for the Fab. Qualitative assessment by ranking E_a of the Fab domain showed good agreement with monomer content in storage stabilities of individual mAb sub-sets.

CONCLUSION

E_a from IF unfolding transitions can be used in addition to other commonly used thermodynamic predictive parameters to discriminate and characterize thermal stability of different mAbs in different formulations. Hence, it shows great potential for antibody engineering and formulation scientists.

Spin Freezing and Its Impact on Pore Size, Tortuosity and Solid State

Spin freeze-drying, as a part of a continuous freeze-drying technology, is associated with a much higher drying rate and a higher level of process control in comparison with batch freeze-drying. However, the impact of the spin freezing rate on the dried product layer characteristics is not well understood at present. This research focuses on the relation between spin-freezing and pore size, pore shape, dried product mass transfer resistance and solid state of the dried product layer. This was thoroughly investigated via high-resolution X-ray micro-computed tomography (µCT), scanning electron microscopy (SEM), thermal imaging and solid state X-ray diffraction (XRD). It was concluded that slow spin-freezing rates resulted in the formation of highly tortuous structures with a high dried-product mass-transfer resistance, while fast spin-freezing rates resulted in lamellar structures with a low tortuosity and low dried-product mass-transfer resistance.

Poly(disulfide)s: From Synthesis to Drug Delivery

Bioresponsive polymers have been widely used in drug delivery because of their degradability. For example, poly(disulfide)s with repeating disulfide bonds in the main chain have attracted considerable research attention. The characteristics of the disulfide bonds, including their dynamic and reversible properties and their responsiveness to stimuli such as reductants, light, heat, and mechanical force, make them ideal platforms for on-demand drug delivery. This review introduces the synthesis methods and applications of poly(disulfide)s. Furthermore, the synthesis methods of poly(disulfide)s are classified on the basis of the monomers used: oxidative step-growth polymerization with dithiols, ring-opening polymerization with cyclic disulfides, and polymerization with linear disulfides. In addition, recent advances in poly(disulfide)s for the delivery of small-molecule or biomacromolecular drugs are discussed. Quantum-dot-loaded poly(disulfide) delivery systems for imaging are also included. This review provides an overview of the various design strategies employed in the construction of poly(disulfide) platforms to inspire new applications in the field of drug delivery.

Effect of Fatty Acid Composition in Polysorbate 80 on the Stability of Therapeutic Protein Formulations

Purpose

Polysorbate excipients are commonly used as surfactants to stabilize therapeutic proteins in formulations. Degradation of polysorbates could lead to particle formation and instability of the drug formulation. We investigated how the fatty acid composition of polysorbate 80 impacts the degradation profile, particle formation, and product stability under stress conditions.

Methods

Two polysorbate 80-containing therapeutic protein formulations were reformulated with either Polysorbate 80 NF synthesized from a fatty acid mixture that contains mainly oleic acid (≥58%) or a version of polysorbate 80 synthesized with high oleic acid (>98%). Stress conditions, including high temperature and esterase spiking, were applied and changes to both the polysorbate and the therapeutic protein product were investigated for stability, purity, innate immune response and biological activity.

Results

The addition of esterase and storage at 37°C led to significant hydrolysis of the polysorbate and increases in sub-visible particle formation for both polysorbates tested. The fatty acid composition of polysorbate 80 did not directly alter the stability profile of either therapeutic protein as measured by size exclusion chromatography, or significantly impact innate immune response or biological activity. However, formulations with Polysorbate 80 NF showed greater propensity for sub-visible particle formation under stress conditions.

Conclusions

These results suggest that composition of fatty acids in polysorbate 80 may be a promoter for sub-visible particulate formation under the stress conditions tested but may not impact protein aggregation or biological activity.

Mapping the myristoylome through a complete understanding of protein myristoylation biochemistry

Protein myristoylation is a C14 fatty acid modification found in all living organisms. Myristoylation tags either the N-terminal alpha groups of cysteine or glycine residues through amide bonds or lysine and cysteine side chains directly or indirectly via glycerol thioester and ester linkages. Before transfer to proteins, myristate must be activated into myristoyl coenzyme A in eukaryotes or, in bacteria, to derivatives like phosphatidylethanolamine. Myristate originates through de novo biosynthesis (e.g., plants), from external uptake (e.g., human tissues), or from mixed origins (e.g., unicellular organisms). Myristate usually serves as a molecular anchor, allowing tagged proteins to be targeted to membranes and travel across endomembrane networks in eukaryotes. In this review, we describe and discuss the metabolic origins of protein-bound myristate. We review strategies for in vivo protein labeling that take advantage of click-chemistry with reactive analogs, and we discuss new approaches to the proteome-wide discovery of myristate-containing proteins. The machineries of myristoylation are described, along with how protein targets can be generated directly from translating precursors or from processed proteins. Few myristoylation catalysts are currently described, with only N-myristoyltransferase described to date in eukaryotes. Finally, we describe how viruses and bacteria hijack and exploit myristoylation for their pathogenicity.

Zwitterionic polymers in drug delivery: A review

Developments of novel drug delivery vehicles are sought-after to augment the therapeutic effectiveness of standard drugs. An urgency to design novel drug delivery vehicles that are sustainable, biocompatible, have minimized cytotoxicity, no immunogenicity, high stability, long circulation time, and are capable of averting recognition by the immune system is perceived. In this pursuit for an ideal candidate for drug delivery vehicles, zwitterionic materials have come up as fulfilling almost all these expectations. This comprehensive review is presenting the progress made by zwitterionic polymeric architectures as prospective sustainable drug delivery vehicles. Zwitterionic polymers with varied architecture such as appending protein conjugates, nanoparticles, surface coatings, liposomes, hydrogels, etc, used to fabricate drug delivery vehicles are reviewed here. A brief introduction of zwitterionic polymers and their application as reliable drug delivery vehicles, such as zwitterionic polymer-protein conjugates, zwitterionic polymer-based drug nanocarriers, and stimulus-responsive zwitterionic polymers are discussed in this discourse. The prospects shown by zwitterionic architecture suggest the tremendous potential for them in this domain. This critical review will encourage the researchers working in this area and boost the development and commercialization of such devices to benefit the healthcare fraternity.

Relugolix, an oral gonadotropin-releasing hormone antagonist for the treatment of prostate cancer

Androgen deprivation therapy using gonadotropin-releasing hormone (GnRH) analogues is standard treatment for intermediate and advanced prostate cancer. GnRH agonist therapy results in an initial testosterone flare, and increased metabolic and cardiovascular risks. The GnRH antagonist relugolix is able to reduce serum testosterone levels in men with prostate cancer without inducing testosterone flare. In the HERO Phase III trial, relugolix was superior to leuprolide acetate at rapidly reducing testosterone and continuously suppressing testosterone, with faster post-treatment recovery of testosterone levels. Relugolix was associated with a 54% lower incidence of major adverse cardiovascular events than leuprolide acetate. As the first oral GnRH antagonist approved for the treatment of advanced prostate cancer, relugolix offers a new treatment option.

Manufacturing Stable Bacteriophage Powders by Including Buffer System in Formulations and Using Thin Film Freeze-drying Technology

PURPOSE

Bacteriophage (phage) therapy has re-gained attention lately given the ever-increasing prevalence of multi-drug resistance 'super-bugs'. To develop therapeutic phage into clinically usable drug products, the strategy of solidifying phage formulations has been implemented to diversify the dosage forms and to overcome the storage condition limitations for liquid phage formulations.

METHOD

In our work, we hypothesize and tested that an advanced technology, thin film freeze-drying (TFFD), can be used to produce phage containing dry powders without significantly losing phage viability. Here we selected T7 phage as our model phage in a preliminary screening study.

RESULTS

We found that a binary excipient matrix of sucrose and leucine at ratios of 90:10 or 75:25 by weight, protected phage from the stresses encountered during the TFFD process. In addition, we confirmed that incorporating a buffer system in the formulation significantly improved the survival of phage during the initial freezing step and subsequent sublimation step in the solidifying processes. The titer loss of phage in SM buffer (Tris/NaCl/MgSO4) containing formulation was as low as 0.19 log plaque forming units, which indicated that phage function was well preserved after the TFFD process. The presence of buffers markedly reduced the geometric particle sizes as determined by a dry dispersion method using laser diffraction, which indicated that the TFFD phage powder formulations were easily sheared into smaller powder aggregates, an ideal property for facilitating a variety of topical drug delivery routes including pulmonary delivery through dry powder inhalers, nebulization after reconstitution, and intranasal or wound therapy, etc. CONCLUSION: From these findings, we show that introducing buffer system can stabilize phage during dehydration processes, and TFFD, as a novel particle engineering method, can successfully produce phage containing powders that possess the desired properties for bioactivity and potentially for inhalation therapy.

Amyloidogenicity of peptides targeting diabetes and obesity

Since the discovery of insulin, a century ago, the repertoire of therapeutic polypeptides targeting diabetes - and now also obesity - have increased substantially. The focus on quality has shifted from impure and unstable preparations of animal insulin to highly pure, homologous recombinant insulin, along with other peptide-based hormones and analogs such as amylin analogs (pramlintide, davalintide, cagrilintide), glucagon and glucagon-like peptide-1 receptor agonists (GLP-1, liraglutide, exenatide, semaglutide). Proper formulation, storage, manipulation and usage by professionals and patients are required in order to avoid agglomeration into high molecular weight products (HMWP), either amorphous or amyloid, which could result in potential loss of biological activity and short- or long-term immune reaction and silent inactivation. In this narrative review, we present perspective of the aggregation of therapeutic polypeptides used in diabetes and other metabolic diseases, covering the nature and mechanisms, analytical techniques, physical and chemical stability, strategies aimed to hamper the formation of HMWP, and perspectives on future biopharmaceutical developments.

Cell trafficking and regulation of osteoblastogenesis by extracellular vesicle associated bone morphogenetic protein 2

Extracellular vesicles (EVs) are characterized by complex cargo composition and carry a wide array of signalling cargo, including growth factors (GFs). Beyond surface-associated GFs, it is unclear if EV intralumenal growth factors are biologically active. Here, bone morphogenetic protein-2 (BMP2), loaded directly into the lumen of EVs designated engineered BMP2-EVs (eBMP2-EVs), was comprehensively characterized including its regulation of osteoblastogenesis. eBMP2-EVs and non-EV 'free' BMP2 were observed to similarly regulate osteoblastogenesis. Furthermore, cell trafficking experiments suggest rapid BMP2 recycling and its extracellular release as 'free' BMP2 and natural occurring BMP2-EVs (nBMP2-EVs), with both being osteogenic. Interestingly, BMP2 occurs on the EV surface of nBMP2-EVs and is susceptible to proteolysis, inhibition by noggin and complete dissociation from nBMP2-EVs over 3 days. Whereas, within the eBMP2-EVs, BMP2 is protected from proteolysis, inhibition by noggin and is retained in EV lumen at 100% for the first 24 h and ∼80% after 10 days. Similar to 'free' BMP2, bioprinted eBMP2-EV microenvironments induced osteogenesis in vitro and in vivo in spatial registration to the printed patterns. Taken together, BMP2 signalling involves dynamic BMP2 cell trafficking in and out of the cell involving EVs, with distinct differences between these nBMP2-EVs and eBMP2-EVs attributable to the BMP2 cargo location with EVs. Lastly, eBMP2-EVs appear to deliver BMP2 directly into the cytoplasm, initiating BMP2 signalling within the cell, bypassing its cell surface receptors.

Supramolecular polymer-based transformable material for reversible PEGylation of protein drugs

We herein developed a transformable mixing-type material for reversible PEGylation of protein drugs using a supramolecular backbone polymer, that is, polyrotaxane possessing both amino groups and PEG chains (PEG-NH2-PRX). We expected that PEG-NH2-PRX provides amino groups to interact with protein drugs on demand because the mobility of amino groups in PEG-NH2-PRX was high. In fact, PEG-NH2-PRX formed complexes with protein drugs efficiently compared to PEGylated amino-dextran (PEG-NH2-DEX), a control material fabricated with a macromolecular backbone polymer. Moreover, PEG-NH2-PRX markedly improved the stability of antibodies and prolonged the hypoglycemic effects of insulin without loss of bioactivity, compared to PEG-NH2-DEX. These findings suggest that the supramolecular material, PEG-NH2-PRX, is a promising reversible PEGylation material for protein drugs compared to macromolecular materials.

Multifaceted role of phyto-derived polyphenols in nanodrug delivery systems

As naturally occurring bioactive products, several lines of evidence have shown the potential of polyphenols in the medical intervention of various diseases, including tumors, inflammatory diseases, and cardiovascular diseases. Notably, owing to the particular molecular structure, polyphenols can combine with proteins, metal ions, polymers, and nucleic acids providing better strategies for polyphenol-delivery strategies. This contributes to the inherent advantages of polyphenols as important functional components for other drug delivery strategies, e.g., protecting nanodrugs from oxidation as a protective layer, improving the physicochemical properties of carbohydrate polymer carriers, or being used to synthesize innovative functional delivery vehicles. Polyphenols have emerged as a multifaceted player in novel drug delivery systems, both as therapeutic agents delivered to intervene in disease progression and as essential components of drug carriers. Although an increasing number of studies have focused on polyphenol-based nanodrug delivery including epigallocatechin-3-gallate, curcumin, resveratrol, tannic acid, and polyphenol-related innovative preparations, these molecules are not without inherent shortcomings. The active biochemical characteristics of polyphenols constitute a prerequisite to their high-frequency use in drug delivery systems and likewise to provoke new challenges for the design and development of novel polyphenol drug delivery systems of improved efficacies. In this review, we focus on both the targeted delivery of polyphenols and the application of polyphenols as components of drug delivery carriers, and comprehensively elaborate on the application of polyphenols in new types of drug delivery systems. According to the different roles played by polyphenols in innovative drug delivery strategies, potential limitations and risks are discussed in detail including the influences on the physical and chemical properties of nanodrug delivery systems, and their influence on normal physiological functions inside the organism.

Purification of Modified Therapeutic Proteins Available on the Market: An Analysis of Chromatography-Based Strategies

Proteins, which have inherent biorecognition properties, have long been used as therapeutic agents for the treatment of a wide variety of clinical indications. Protein modification through covalent attachment to different moieties improves the therapeutic's pharmacokinetic properties, affinity, stability, confers protection against proteolytic degradation, and increases circulation half-life. Nowadays, several modified therapeutic proteins, including PEGylated, Fc-fused, lipidated, albumin-fused, and glycosylated proteins have obtained regulatory approval for commercialization. During its manufacturing, the purification steps of the therapeutic agent are decisive to ensure the quality, effectiveness, potency, and safety of the final product. Due to the robustness, selectivity, and high resolution of chromatographic methods, these are recognized as the gold standard in the downstream processing of therapeutic proteins. Moreover, depending on the modification strategy, the protein will suffer different physicochemical changes, which must be considered to define a purification approach. This review aims to deeply analyze the purification methods employed for modified therapeutic proteins that are currently available on the market, to understand why the selected strategies were successful. Emphasis is placed on chromatographic methods since they govern the purification processes within the pharmaceutical industry. Furthermore, to discuss how the modification type strongly influences the purification strategy, the purification processes of three different modified versions of coagulation factor IX are contrasted.

PLGA/PLA-Based Long-Acting Injectable Depot Microspheres in Clinical Use: Production and Characterization Overview for Protein/Peptide Delivery

Over the past few decades, long acting injectable (LAI) depots of polylactide-co-glycolide (PLGA) or polylactic acid (PLA) based microspheres have been developed for controlled drug delivery to reduce dosing frequency and to improve the therapeutic effects. Biopharmaceuticals such as proteins and peptides are encapsulated in the microspheres to increase their bioavailability and provide a long release period (days or months) with constant drug plasma concentration. The biodegradable and biocompatible properties of PLGA/PLA polymers, including but not limited to molecular weight, end group, lactide to glycolide ratio, and minor manufacturing changes, could greatly affect the quality attributes of microsphere formulations such as release profile, size, encapsulation efficiency, and bioactivity of biopharmaceuticals. Besides, the encapsulated proteins/peptides are susceptible to harsh processing conditions associated with microsphere fabrication methods, including exposure to organic solvent, shear stress, and temperature fluctuations. The protein/peptide containing LAI microspheres in clinical use is typically prepared by double emulsion, coacervation, and spray drying techniques. The purpose of this review is to provide an overview of the formulation attributes and conventional manufacturing techniques of LAI microspheres that are currently in clinical use for protein/peptides. Furthermore, the physicochemical characteristics of the microsphere formulations are deliberated.

pH-sensitive chitosan-deoxycholic acid/alginate nanoparticles for oral insulin delivery

Oral absorption of peptides/proteins is usually compromised by various gastrointestinal tract barriers. To improve delivery efficiency, chitosan-conjugated deoxycholic acid (CS-DCA) coupled with sodium alginate (ALG) was prepared to load insulin into pH-sensitive nanoparticles. The insulin-loaded chitosan-deoxycholic acid/alginate nanoparticles (CDA NPs) were characterized by size (143.3 ± 10.8 nm), zeta potential (19.5 ± 1.6 mV), entrapment efficiency (61.14 ± 1.67%), and insulin drug loading (3.36 ± 0.09%). The CDA NPs exhibited pH-triggered release characteristics in vitro and protected the wrapped insulin from gastric degradation. Stability of the CDA NPs in enzyme-containing simulated gastrointestinal fluids suggested that the NPs could partially protect the wrapped insulin from enzymatic degradation. Additionally, CS-DCA-modified NPs promoted the permeability of Caco-2 cells and enhanced intracellular absorption of FITC-labeled insulin by 9.4 and 1.2-folds, when compared to insulin solution and unmodified NPs, respectively. The positively charged NPs increased intestinal villi adhesion and enhanced insulin absorption in the intestines of diabetic rat models. Furthermore, the hypoglycemic test showed that CDA NPs prolonged insulin release in vivo and exerted a remarkable hypoglycemic effect on diabetic rats with an oral bioavailability of 15%. In conclusion, CDA NPs is a potential oral insulin delivery system.

Optimization of expression, purification and secretion of functional recombinant human growth hormone in Escherichia coli using modified staphylococcal protein a signal peptide

Background

Human Growth Hormone (hGH) is a glycoprotein released from the pituitary gland. Due to the wide range of effects in humans, any disruption in hGH secretion could have serious consequences. This highlights the clinical importance of hGH production in the treatment of different diseases associated with a deficiency of this hormone. The production of recombinant mature hormone in suitable hosts and secretion of this therapeutic protein into the extracellular space can be considered as one of the best cost-effective approaches not only to obtain the active form of the protein but also endotoxin-free preparation. Since the natural growth hormone signal peptide is of eukaryotic origin and is not detectable by any of the Escherichia coli secretory systems, including Sec and Tat, and is therefore unable to secrete hGH in the prokaryotic systems, designing a new and efficient signal peptide is essential to direct hGh to the extracellular space.

Results

In this study, using a combination of the bioinformatics design and molecular genetics, the protein A signal peptide from Staphylococcus aureus was modified, redesigned and then fused to the mature hGH coding region. The recombinant hGH was then expressed in E. coli and successfully secreted to the medium through the Sec pathway. Secretion of the hGH into the medium was verified using SDS-PAGE and western blot analysis. Recombinant hGH was then expressed in E. coli and successfully secreted into cell culture medium via the Sec pathway. The secretion of hGH into the extracellular medium was confirmed by SDS-PAGE and Western blot analysis. Furthermore, the addition of glycine was shown to improve hGH secretion onto the culture medium. Equations for determining the optimal conditions were also determined. Functional hGH analysis using an ELISA-based method confirmed that the ratio of the active form of secreted hGH to the inactive form in the periplasm is higher than this ratio in the cytoplasm.

Conclusions

Since the native signal protein peptide of S. aureus protein A was not able to deliver hGH to the extracellular space, it was modified using bioinformatics tools and fused to the n-terminal region of hGh to show that the redesigned signal peptide was functional.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12896-021-00701-x.

Characterization of a Stable Form of Carboxypeptidase G2 (Glucarpidase), a Potential Biobetter Variant, From Acinetobacter sp. 263903-1

Carboxypeptidase G2 (CPG2) is a bacterial enzyme widely used to detoxify methotrexate (MTX) and in enzyme/prodrug therapy for cancer treatment. However, several drawbacks, such as instability, have limited its efficiency. Herein, we have evaluated the properties of a putative CPG2 from Acinetobacter sp. 263903-1 (AcCPG2). AcCPG2 is compared with a CPG2 derived from Pseudomonas sp. strain RS-16 (PsCPG2), available as an FDA-approved medication called glucarpidase. After modeling AcCPG2 using the I-TASSER program, the refined model was validated by PROCHECK, VERIFY 3D and according to the Z score of the model. Using computational analyses, AcCPG2 displayed higher thermodynamic stability and a lower aggregation propensity than PsCPG2. AcCPG2 showed an optimum pH of 7.5 against MTX and was stable over a pH range of 5-10. AcCPG2 exhibited optimum activity at 50 °C and higher thermal stability at a temperature range of 20-70 °C compared to PsCPG2. The K_m value of the purified AcCPG2 toward folate and MTX was 31.36 µM and 44.99 µM, respectively. The V_max value of AcCPG2 for folate and MTX was 125.80 µmol/min/mg and 48.90  µmol/min/mg, respectively. Accordingly, thermostability and pH versatility makes AcCPG2 a potential biobetter variant for therapeutic applications.

Understanding the Impact of Protein-Excipient Interactions on Physical Stability of Spray-Dried Protein Solids

Mannitol, leucine, and trehalose have been widely used in spray-dried formulations, especially for inhalation formulations. The individual contribution of these excipients on protein physical stability in spray-dried solids was studied here using bovine serum albumin (BSA) as a model protein. The spray-dried solids were characterized with scanning electron microscopy, powder X-ray diffraction, and solid-state Fourier-transform infrared spectroscopy to analyze particle morphology, crystallinity, and secondary structure change, respectively. Advanced solid-state characterizations were conducted with solid-state hydrogen-deuterium exchange (ssHDX) and solid-state nuclear magnetic resonance (ssNMR) to explore protein conformation and molecular interactions in the context of the system physical stability. Trehalose remained amorphous after spray-drying and was miscible with BSA, forming hydrogen bonds to maintain protein conformation, whereby this system showed the least monomer loss in the stability study. As indicated by ssNMR, both crystalline and amorphous forms of mannitol existed in the spray-dried BSA-mannitol solids, which explained its partial stabilizing effect on BSA. Leucine showed the strongest crystallization tendency after spray-drying and did not provide a stabilizing effect due to substantial immiscibility and phase separation with BSA as a result of crystal formation. This work showed novel applications of ssNMR in examining protein conformation and protein-excipient interaction in dry formulations. Overall, our results demonstrate the pivotal role of advanced solid-state characterization techniques in understanding the physical stability of spray-dried protein solids.

Self-assembly of protein-polymer conjugates for drug delivery

Protein-polymer conjugates are a class of molecules that combine the stability of polymers with the diversity, specificity, and functionality of biomolecules. These bioconjugates can result in hybrid materials that display properties not found in their individual components and can be particularly relevant for drug delivery applications. Engineering amphiphilicity into these bioconjugate materials can lead to phase separation and the assembly of high-order structures. The assembly, termed self-assembly, of these hierarchical structures entails multiple levels of organization: at each level, new properties emerge, which are, in turn, influenced by lower levels. Here, we provide a critical review of protein-polymer conjugate self-assembly and how these materials can be used for therapeutic applications and drug delivery. In addition, we discuss central bioconjugate design questions and propose future perspectives for the field of protein-polymer conjugate self-assembly.

Multiphysics Modeling and Simulation of Subcutaneous Injection and Absorption of Biotherapeutics: Sensitivity Analysis

PURPOSE

A multiphysics simulation model was recently developed to capture major physical and mechanical processes of local drug transport and absorption kinetics of subcutaneously injected monoclonal antibody (mAb) solutions. To further explore the impact of individual drug attributes and tissue characteristics on the tissue biomechanical response and drug mass transport upon injection, sensitivity analysis was conducted and reported.

METHOD

Various configurations of injection conditions, drug-associated attributes, and tissue properties were simulated with the developed multiphysics model. Simulation results were examined with regard to tissue deformation, porosity change, and spatiotemporal distributions of pressure, interstitial fluid flow, and drug concentration in the tissue.

RESULTS

Injection conditions and tissue properties were found influential on the mechanical response of tissue and interstitial fluid velocity to various extents, leading to distinct drug concentration profiles. Intrinsic tissue porosity, lymphatic vessel density, and drug permeability through the lymphatic membrane were particularly essential in determining the local absorption rate of an mAb injection.

CONCLUSION

The sensitivity analysis study may shed light on the product development of an mAb formulation, as well as on the future development of the simulation method.

Nanoparticle-Mediated Angiotensin-(1-9) Drug Delivery for the Treatment of Cardiac Hypertrophy

Ang-(1-9) peptide is a bioactive vasodilator peptide that prevents cardiomyocyte hypertrophy in vitro and in vivo as well as lowers blood pressure and pathological cardiovascular remodeling; however, it has a reduced half-life in circulation, requiring a suitable carrier for its delivery. In this work, hybrid nanoparticles composed of polymeric nanoparticles (pNPs) based on Eudragit^® E/Alginate (EE/Alg), and gold nanospheres (AuNS), were developed to evaluate their encapsulation capacity and release of Ang-(1-9) under different experimental conditions. Hybrid pNPs were characterized by dynamic light scattering, zeta potential, transmission and scanning electron microscopy, size distribution, and concentration by nanoparticle tracking analysis. Nanometric pNPs, with good polydispersity index and colloidally stable, produced high association efficiency of Ang-(1-9) and controlled release. Finally, the treatment of neonatal cardiomyocytes in culture with EE/Alg/AuNS 2% + Ang-(1-9) 20% pNPs decreased the area and perimeter, demonstrating efficacy in preventing norepinephrine-induced cardiomyocyte hypertrophy. On the other hand, the incorporation of AuNS did not cause negative effects either on the cytotoxicity or on the association capacity of Ang-(1-9), suggesting that the hybrid carrier EE/Alg/AuNS pNPs could be used for the delivery of Ang-(1-9) in the treatment of cardiovascular hypertrophy.

Complementary Structural Information for Stressed Antibodies from Hydrogen-Deuterium Exchange and Covalent Labeling Mass Spectrometry

Identifying changes in the higher-order structure (HOS) of therapeutic monoclonal antibodies upon storage, stress, or mishandling is important for ensuring efficacy and avoiding adverse effects. Here, we demonstrate diethylpyrocarbonate (DEPC)-based covalent labeling (CL) mass spectrometry (MS) and hydrogen-deuterium exchange (HDX)/MS can be used together to provide site-specific information about subtle conformational changes that are undetectable by traditional techniques. Using heat-stressed rituximab as a model protein, we demonstrate that CL/MS is more sensitive than HDX/MS to subtle HOS structural changes under low stress conditions (e.g., 45 and 55 °C for 4 h). At higher heat stress (65 °C for 4 h), we find CL/MS and HDX/MS provide complementary information, as CL/MS reports on changes in side chain orientation while HDX/MS reveals changes in backbone dynamics. More interestingly, we demonstrate that the two techniques work synergistically to identify likely aggregation sites in the heat-stressed protein. In particular, the C_H3 and C_L domains experience decreases in deuterium uptake after heat stress, while only the C_H3 domain experiences decreases in DEPC labeling extent as well, suggesting the C_H3 domain is a likely site of aggregation and the C_L domain only undergoes a decrease in backbone dynamics. The combination of DEPC-CL/MS and HDX/MS provides valuable structural information, and the two techniques should be employed together when investigating the HOS of protein therapeutics.

Synergistic integration of metal nanoclusters and biomolecules as hybrid systems for therapeutic applications

Therapeutic nanoparticles are designed to enhance efficacy, real-time monitoring, targeting accuracy, biocompatibility, biodegradability, safety, and the synergy of diagnosis and treatment of diseases by leveraging the unique physicochemical and biological properties of well-developed bio-nanomaterials. Recently, bio-inspired metal nanoclusters (NCs) consisting of several to roughly dozens of atoms (<2 nm) have attracted increasing research interest, owing to their ultrafine size, tunable fluorescent capability, good biocompatibility, variable metallic composition, and extensive surface bio-functionalization. Hybrid core-shell nanostructures that effectively incorporate unique fluorescent inorganic moieties with various biomolecules, such as proteins (enzymes, antigens, and antibodies), DNA, and specific cells, create fluorescently visualized molecular nanoparticle. The resultant nanoparticles possess combinatorial properties and synergistic efficacy, such as simplicity, active bio-responsiveness, improved applicability, and low cost, for combination therapy, such as accurate targeting, bioimaging, and enhanced therapeutic and biocatalytic effects. In contrast to larger nanoparticles, bio-inspired metal NCs allow rapid renal clearance and better pharmacokinetics in biological systems. Notably, advances in nanoscience, interfacial chemistry, and biotechnologies have further spurred researchers to explore bio-inspired metal NCs for therapeutic purposes. The current review presents a comprehensive and timely overview of various metal NCs for various therapeutic applications, with a special emphasis on the design rationale behind the use of biomolecules/cells as the main scaffolds. In the different hybrid platform, we summarize the current challenges and emerging perspectives, which are expected to offer in-depth insight into the rational design of bio-inspired metal NCs for personalized treatment and clinical translation.

Pharmaceutical protein solids: Drying technology, solid-state characterization and stability

Despite the boom in biologics over the past decade, the intrinsic instability of these large molecules poses significant challenges to formulation development. Almost half of all pharmaceutical protein products are formulated in the solid form to preserve protein native structure and extend product shelf-life. In this review, both traditional and emerging drying techniques for producing protein solids will be discussed. During the drying process, various stresses can impact the stability of protein solids. However, understanding the impact of stress on protein product quality can be challenging due to the lack of reliable characterization techniques for biological solids. Both conventional and advanced characterization techniques are discussed including differential scanning calorimetry (DSC), solid-state Fourier transform infrared spectrometry (ssFTIR), solid-state fluorescence spectrometry, solid-state hydrogen deuterium exchange (ssHDX), solid-state nuclear magnetic resonance (ssNMR) and solid-state photolytic labeling (ssPL). Advanced characterization tools may offer mechanistic investigations into local structural changes and interactions at higher resolutions. The continuous exploration of new drying techniques, as well as a better understanding of the effects caused by different drying techniques in solid state, would advance the formulation development of biological products with superior quality.

Machine learning reveals hidden stability code in protein native fluorescence

Conformational stability of a protein is usually obtained by spectroscopically measuring the unfolding melting temperature. However, optical spectra under native conditions are considered to contain too little resolution to probe protein stability. Here, we have built and trained a neural network model to take the temperature-dependence of intrinsic fluorescence emission under native-only conditions as inputs, and then predict the spectra at the unfolding transition and denatured state. Application to a therapeutic antibody fragment demonstrates that thermal transitions obtained from the predicted spectra correlate highly with those measured experimentally. Crucially, this work reveals that the temperature-dependence of native fluorescence spectra contains a high-degree of previously hidden information relating native ensemble features to stability. This could lead to rapid screening of therapeutic protein variants and formulations based on spectroscopic measurements under non-denaturing temperatures only.

Interferon-Based Biopharmaceuticals: Overview on the Production, Purification, and Formulation

The advent of biopharmaceuticals in modern medicine brought enormous benefits to the treatment of numerous human diseases and improved the well-being of many people worldwide. First introduced in the market in the early 1980s, the number of approved biopharmaceutical products has been steadily increasing, with therapeutic proteins, antibodies, and their derivatives accounting for most of the generated revenues. The success of pharmaceutical biotechnology is closely linked with remarkable developments in DNA recombinant technology, which has enabled the production of proteins with high specificity. Among promising biopharmaceuticals are interferons, first described by Isaacs and Lindenmann in 1957 and approved for clinical use in humans nearly thirty years later. Interferons are secreted autocrine and paracrine proteins, which by regulating several biochemical pathways have a spectrum of clinical effectiveness against viral infections, malignant diseases, and multiple sclerosis. Given their relevance and sustained market share, this review provides an overview on the evolution of interferon manufacture, comprising their production, purification, and formulation stages. Remarkable developments achieved in the last decades are herein discussed in three main sections: (i) an upstream stage, including genetically engineered genes, vectors, and hosts, and optimization of culture conditions (culture media, induction temperature, type and concentration of inducer, induction regimens, and scale); (ii) a downstream stage, focusing on single- and multiple-step chromatography, and emerging alternatives (e.g., aqueous two-phase systems); and (iii) formulation and delivery, providing an overview of improved bioactivities and extended half-lives and targeted delivery to the site of action. This review ends with an outlook and foreseeable prospects for underdeveloped aspects of biopharma research involving human interferons.

High-Throughput Screening for Colloidal Stability of Peptide Formulations Using Dynamic and Static Light Scattering

Selection of an appropriate formulation to stabilize therapeutic proteins against aggregation is one of the most challenging tasks in early-stage drug product development. The amount of aggregates is more difficult to quantify in the case of peptides due to their small molecular size. Here, we investigated the suitability of diffusion self-interaction parameters (k_D) and osmotic second virial coefficients (B₂₂) for high-throughput (HT) screening of peptide formulations regarding their aggregation risk. These parameters were compared to the effect of thermal stress on colloidal stability. The formulation matrix comprised six buffering systems at two selected pH values, four tonicity agents, and a common preservative. The results revealed that electrostatic interactions are the main driver to control colloidal stability. Preferred formulations consisted of acetate and succinate buffer at pH 4.5 combined with glycerol or mannitol and optional m-cresol. k_D proved to be a suitable surrogate for B₂₂ as an indicator of high colloidal stability in the case of peptides as was previously described for globular proteins and antibodies. Formulation assessment solely based on k_D obtained by HT methods offers important insights into the optimization of colloidal stability during the early development of peptide-based liquid formulations and can be performed with a limited amount of peptide (∼360 mg).

Synthesis and evaluation of disulfide-rich cyclic α-conotoxin [S9A]TxID analogues as novel α3β4 nAChR antagonists

Head-to-tail cyclization is an effective strategy to improve the biological stability of peptides. The α-conotoxin [S9A]TxID is a peptide that inhibits α3β4 nAChR with high activity and selectivity. Herein, we established a method for cyclizing and oxidative folding of [S9A]TxID, and six cyclic analogues of [S9A]TxID were chemically synthesized with various linker lengths. We used the electrophysiology assay to measure activity values of these cyclic analogues, and obtained the most potent analogue c[S9A]TxID-6, which was more stable than native [S9A]TxID against proteinase K.

HP-β-CD for the formulation of IgG and Ig-based biotherapeutics

The main challenge to develop HCF for IgG and Ig-based therapeutics is to achieve essential solubility, viscosity and stability of these molecules in order to maintain product quality and meet regulatory requirement during manufacturing, production, storage, shipment and administration processes. The commonly used and FDA approved excipients for IgG and Ig -based therapeutics may no longer fulfil the challenge of HCF development for these molecules to certain extent, especially for some complex Ig-based platforms. 2-Hydroxypropyl beta-cyclodextrin (HP-β-CD) is one of the promising excipients applied recently for HCF development of IgG and Ig-based therapeutics although it has been used for formulation of small synthesized chemical drugs for more than thirty years. This review describes essential aspects about application of HP-β-CD as excipient in pharmaceutical formulation, including physico-chemical properties of HP-β-CD, supply chain, regulatory, patent landscape, marketed drugs with HP-β-CD, analytics and analytical challenges, stability and control strategies, and safety concerns. It also provides an overview of different studies, and outcomes thereof, regarding formulation development for IgGs and Ig-based molecules in liquid and solid (lyophilized) dosage forms with HP-β-CD. The review specifically highlights the challenges for formulation manufacturing of IgG and Ig-based therapeutics with HP-β-CD and identifies areas for future work in pharmaceutical and formulation development.

Nanofibers as drug-delivery systems for antimicrobial peptides

Microbial infections are a major worldwide public health problem because a number of microorganisms can show drug resistance. Antimicrobial peptides (AMPs) are small biomolecules that present antimicrobial and immunomodulatory activities. Despite their great potential, there are still many barriers to the formulation of these molecules. In this context, nanotechnological approaches such as nanofibers are candidate drug-delivery systems for AMP formulations. These nanomaterials have a large contact surface and may carry several AMPs (single or multilayer), directing them to specific targets. Thus, this review describes the main advances related to the use of nanofibers as drug-delivery systems for AMPs. These strategies can contribute directly to the design of new multifunctional wound dressings, coatings for prostheses, and tissue engineering applications.

Raman spectroscopy for in situ, real time monitoring of protein aggregation in lyophilized biotherapeutic products

Quality of biotherapeutic products is of paramount importance for ensuring patient safety. Analytical tools that can facilitate rapid quality assessment of the therapeutic product at the point of care are very much in demand. In this article, we apply chemometrics based analysis of Raman spectra towards quantitative prediction of protein aggregation in lyophilized biotherapeutic products. Two commercially available therapeutic proteins, erythropoietin (EPO) and human growth hormone (HGH), have been used to demonstrate the applicability of the proposed approach. Thermally induced protein aggregation was monitored by size exclusion chromatography as well as Raman spectroscopy with a 785 nm wavelength laser. Partial least square (PLS) regression was used to analyse the Raman spectra and create a model for quantitative determination of aggregate. Satisfactory performance was observed with both EPO and HGH with R² of 0.91 and 0.94, cross-validation correlation coefficient of 0.85 and 0.89, and Root Mean Square Error computed from cross calibration (RMSEcv) of 5.25 and 1.92, respectively. The developed approach can enable rapid and accurate assessment of aggregation in lyophilized samples of biotherapeutic products. The study also demonstrates novel use of Raman spectroscopy for protein quantification through a vial.

Single Enzyme Nanoparticles with Improved Biocatalytic Activity through Protein Entrapment in a Surfactant Shell

A polymeric corona consisting of an alkyl-glycolic acid ethoxylate (C_XEO_Y) surfactant offers a promising approach toward endowing proteins with thermotropic phase behavior and hyperthermal activity. Typically, preparation of protein–surfactant biohybrids is performed via chemical modification of acidic residues followed by electrostatic conjugation of an anionic surfactant to encapsulate single proteins. While this procedure has been applied to a broad range of proteins, modification of acidic residues may be detrimental to function for specific enzymes. Herein, we report on the one-pot preparation of biohybrids via covalent conjugation of surfactants to accessible lysine residues. We entrap the model enzyme hen egg-white lysozyme (HEWL) in a shell of carboxyl-functionalized C₁₂EO₁₀ or C₁₂EO₂₂ surfactants. With fewer surfactants, our covalent biohybrids display similar thermotropic phase behavior to their electrostatically conjugated analogues. Through a combination of small-angle X-ray scattering and circular dichroism spectroscopy, we find that both classes of biohybrids consist of a folded single-protein core decorated by surfactants. Whilst traditional biohybrids retain densely packed surfactant coronas, our biohybrids display a less dense and heterogeneously distributed surfactant coverage located opposite to the catalytic cleft of HEWL. In solution, this surfactant coating permits 7- or 3.5-fold improvements in activity retention for biohybrids containing C₁₂EO₁₀ or C₁₂EO₂₂, respectively. The reported alternative pathway for biohybrid preparation offers a new horizon to expand upon the library of proteins for which functional biohybrid materials can be prepared. We also expect that an improved understanding of the distribution of tethered surfactants in the corona will be crucial for future structure–function investigations.

Delivery of transcription factors as modulators of cell differentiation

Fundamental studies performed during the last decades have shown that cell fate is much more plastic than previously considered, and technologies for its manipulation are a keystone for many new tissue regeneration therapies. Transcription factors (TFs) are DNA-binding proteins that control gene expression, and they have critical roles in the control of cell fate and other cellular behavior. TF-based therapies have much medical potential, but their use as drugs depends on the development of suitable delivery technologies that can help them reach their action site inside of the cells. TFs can be used either as proteins or encoded in polynucleotides. When used in protein form, many TFs require to be associated to a cell-penetrating peptide or another transduction domain. As polynucleotides, they can be delivered either by viral carriers or by non-viral systems such as polyplexes and lipoplexes. TF-based therapies have extensively shown their potential to solve many tissue-engineering problems, including bone, cartilage and cardiac regeneration. Yet, their use has expanded beyond regenerative medicine to other prominent disease areas such as cancer therapy and immunomodulation. This review summarizes some of the delivery options for effective TF-based therapies and their current main applications.

Suppression of Electrostatic Mediated Antibody Liquid-Liquid Phase Separation by Charged and Noncharged Preferentially Excluded Excipients

Isotonic concentrations of inert cosolutes or excipients are routinely used in protein therapeutic formulations to minimize physical instabilities including aggregation, particulation, and precipitation that are often manifested during drug substance/product manufacture and long-term storage. Despite their prevalent use within the biopharmaceutical industry, a more detailed understanding for how excipients modulate the specific protein-protein interactions responsible for these instabilities is still needed so that informed formulation decisions can be made at the earliest stages of development when protein supply and time are limited. In the present report, subisotonic concentrations of the five common formulation excipients, sucrose, proline, sorbitol, glycerol, arginine hydrochloride, and the denaturant urea, were studied for their effect on the room temperature liquid-liquid phase separation of a model monoclonal antibody (mAb-B). Although each excipient lowered the onset temperatures of mAb-B liquid-liquid phase separation to different extents, all six were found to be preferentially excluded from the native state monomer by vapor pressure osmometry, and no apparent correlations to the excipient dependence of mAb-B melting temperatures were observed. These results and those of the effects of solution pH, addition of salt, and impact of a small number of charge mutations were most consistent with a mechanism of local excipient accumulation, to an extent dependent on their type, with the specific residues that mediate mAb-B electrostatic protein-protein interactions. These findings suggest that selection of excipients on the basis of their interaction with the solvent exposed residues of the native state may at times be a more effective strategy for limiting protein-protein interactions at pharmaceutically relevant storage conditions than choosing those that are excluded from the residues of the native state interior.

Minimally Invasive Nasal Depot (MIND) technique for direct BDNF AntagoNAT delivery to the brain

The limitations of central nervous system (CNS) drug delivery conferred by the blood-brain barrier (BBB) have been a significant obstacle in the development of large molecule therapeutics for CNS disease. Though significantly safer than direct CNS administration via intrathecal (IT) or intracerebroventricular (ICV) injection, the topical intranasal delivery of CNS therapeutics has failed to become clinically useful due to a variety of practical and physiologic drawbacks leading to high dose variability and poor bioavailability. This study describes the minimally invasive nasal depot (MIND) technique, a novel method of direct trans-nasal CNS drug delivery which overcomes the dosing variability and efficiency challenges of traditional topical trans-nasal, trans-olfactory strategies by delivering the entire therapeutic dose directly to the olfactory submucosal space. We found that the implantation of a depot containing an AntagoNAT (AT) capable of de-repressing brain derived neurotrophic factor (BDNF) expression enabled CNS distribution of ATs with significant and sustained upregulation of BDNF with efficiencies approaching 40% of ICV delivery. As the MIND technique is derived from common outpatient rhinological procedures routinely performed in Ear, Nose and Throat (ENT) clinics, our findings support the significant translational potential of this novel minimally invasive strategy as a reliable therapeutic delivery approach for the treatment of CNS diseases.

Directed Enzyme Evolution and Encapsulation in Peptide Nanospheres of Quorum Quenching Lactonase as an Antibacterial Treatment against Plant Pathogen

The need to increase agricultural yield has led to an extensive use of antibiotics against plant pathogens, which has resulted in the emergence of resistant strains. Therefore, there is an increasing demand for new methods, preferably with lower chances of developing resistant strains and a lower risk to the environment or public health. Many Gram-negative bacterial pathogens use quorum sensing, a population-density-dependent regulatory mechanism, to monitor the secretion of N-acyl-homoserine lactones (AHLs) and pathogenicity. Therefore, quorum sensing represents an attractive antivirulence target. AHL lactonases hydrolyze AHLs and have potential antibacterial properties; however, their use is limited by thermal instability and durability, or low activity. Here, we demonstrate that an AHL lactonase from the phosphotriesterase-like lactonase family exhibits high activity with the AHL secreted from the plant pathogen Erwinia amylovora and attenuates infection in planta. Using directed enzyme evolution, we were able to increase the enzyme's temperature resistance (T₅₀, the temperature at which 50% of the activity is retained) by 8 °C. Then, by performing enzyme encapsulation in nanospherical capsules composed of tertbutoxycarbonyl-Phe-Phe-OH peptide, the shelf life was extended for more than 5 weeks. Furthermore, the encapsulated and free mutant were able to significantly inhibit up to 70% blossom's infection in the field, achieving the same efficacy as seen with antibiotics commonly used today to treat the plant pathogen. We conclude that specific AHL lactonase can inhibit E. amylovora infection in the field, as it degrades the AHL secreted by this plant pathogen. The combination of directed enzyme evolution and peptide nanostructure encapsulation significantly improved the thermal resistance and shelf life of the enzyme, respectively, increasing its potential in future development as antibacterial treatment.

Collision-Based Electrochemical Detection of Lysozyme Aggregation

Proteins are utilized across many biomedical and pharmaceutical industries; therefore, methods for rapid and accurate monitoring of protein aggregation are needed to ensure proper product quality. Although these processes have been previously studied, it is difficult to comprehensively evaluate protein folding and aggregation by traditional characterization techniques such as atomic force microscopy (AFM), electron microscopy, or X-ray diffraction, which require sample pre-treatment and do not represent native state proteins in solution. Herein, we report early tracking of lysozyme (Lyz) aggregation states by using single-particle collision electrochemistry (SPCE) of silver nanoparticle (AgNP) redox probes. The method relies on monitoring the rapid interaction of Lyz with AgNPs, which decreases the number of single AgNPs available for collisions and ultimately the frequency of oxidative impacts in the chronoamperometric profile. When Lyz is in a non-aggregated monomeric form, the protein forms a homogeneous coverage onto the surface of AgNPs, stabilizing the particles. When Lyz is aggregated, part of the AgNP surface remains uncoated, promoting the agglomeration of Lyz-AgNP conjugates. The frequency of AgNP impacts decreases with increasing aggregation time, providing a metric to track protein aggregation. Visualizations of integrated oxidation charge-transfer data displayed significant differences between the charge transfer per impact for AgNP samples alone and in the presence of non-aggregated and aggregated Lyz with 99% confidence using parametric ANOVA tests. Electrochemical results revealed meaningful associations with UV-vis, circular dichroism, and AFM, demonstrating that SPCE can be used as an alternative method for studying protein aggregation. This electrochemical technique could serve as a powerful tool to indirectly evaluate protein stability and screen protein samples for formation of aggregates.

Ugi four-component polymerization of amino acid derivatives: a combinatorial tool for the design of polypeptoids

The combinatorial Ugi-4C polymerization of amino acid derivatives is attractive for the future development of polypeptoids and resulting applications.

Discovery-stage identification of drug-like antibodies using emerging experimental and computational methods

There is intense and widespread interest in developing monoclonal antibodies as therapeutic agents to treat diverse human disorders. During early-stage antibody discovery, hundreds to thousands of lead candidates are identified, and those that lack optimal physical and chemical properties must be deselected as early as possible to avoid problems later in drug development. It is particularly challenging to characterize such properties for large numbers of candidates with the low antibody quantities, concentrations, and purities that are available at the discovery stage, and to predict concentrated antibody properties (e.g., solubility, viscosity) required for efficient formulation, delivery, and efficacy. Here we review key recent advances in developing and implementing high-throughput methods for identifying antibodies with desirable in vitro and in vivo properties, including favorable antibody stability, specificity, solubility, pharmacokinetics, and immunogenicity profiles, that together encompass overall drug developability. In particular, we highlight impressive recent progress in developing computational methods for improving rational antibody design and prediction of drug-like behaviors that hold great promise for reducing the amount of required experimentation. We also discuss outstanding challenges that will need to be addressed in the future to fully realize the great potential of using such analysis for minimizing development times and improving the success rate of antibody candidates in the clinic.