High resolution X-ray computed tomography: an emerging tool for small animal cancer research

Characterization of X-ray Dose in Murine Animals Using microCT, a New Low-Dose Detector and nanoDot Dosimeters

BACKGROUND

Dose continues to be an area of concern in preclinical imaging studies, especially for those imaging disease progression in longitudinal studies. To our knowledge, this work is the first to characterize and assess dose from the Inveon CT imaging platform using nanoDot dosimeters. This work is also the first to characterize a new low-dose configuration available for this platform.

METHODOLOGY/PRINCIPAL FINDINGS

nanoDot dosimeters from Landauer, Inc. were surgically implanted into 15 wild type mice. Two nanoDots were placed in each animal: one just under the skin behind the spine and the other located centrally within the abdomen. A manufacturer-recommended CT protocol was created with 1 projection per degree of rotation acquired over 360 degrees. For best comparison of the low dose and standard configurations, noise characteristics of the reconstructed images were used to match the acquisition protocol parameters. Results for all dose measurements showed the average dose delivered to the abdomen to be 13.8 cGy±0.74 and 0.97 cGy±0.05 for standard and low dose configurations respectively. Skin measurements of dose averaged 15.99 cGy±0.72 and 1.18 cGy±0.06. For both groups, the standard deviation to mean was less than 5.6%. The maximum dose received for the abdomen was 15.12 cGy and 0.97 cGy while the maximum dose for the skin was 17.3 cGy and 1.32 cGy. Control dosimeters were used for each group to validate that no unwanted additional radiation was present to bias the results.

CONCLUSIONS/SIGNIFICANCE

This study shows that the Inveon CT platform is suitable for imaging mice both for single and longitudinal studies. Use of low-dose detector hardware results in significant reductions in dose to subjects with a >12x (90%) reduction in delivered dose. Installation of this hardware on another in vivo microCT platform resulted in dose reductions of over 9x (89%).

Advances in functional X-ray imaging techniques and contrast agents

X-rays have been used for non-invasive high-resolution imaging of thick biological specimens since their discovery in 1895. They are widely used for structural imaging of bone, metal implants, and cavities in soft tissue. Recently, a number of new contrast methodologies have emerged which are expanding X-ray's biomedical applications to functional as well as structural imaging. These techniques are promising to dramatically improve our ability to study in situ biochemistry and disease pathology. In this review, we discuss how X-ray absorption, X-ray fluorescence, and X-ray excited optical luminescence can be used for physiological, elemental, and molecular imaging of vasculature, tumors, pharmaceutical distribution, and the surface of implants. Imaging of endogenous elements, exogenous labels, and analytes detected with optical indicators will be discussed.

Detection and early phase assessment of radiation-induced lung injury in mice using micro-CT

Radiation therapy is an important therapeutic modality for thoracic malignancies. However, radiation-induced pulmonary injuries such as radiation pneumonitis and fibrosis are major dose-limiting factors. Previous research shows that micro-computed tomography (micro-CT) can detect radiation-induced lung injuries a few months following irradiation, but studies to assess the early response of lung tissue are lacking. The aim of this study was to determine if micro-CT could be used to detect and assess early-phase radiation–induced lung injury in mice. Twenty-one animals were divided into three groups: normal (n = 7), one day after x-ray exposure (n = 7), and at four days after x-ray exposure (n = 7). The x-ray-exposed groups received a single dose of 20 Gy, to the whole lung. Histology showed enlargements of the air space (Lm: mean chord length) following irradiation. 40.5±3.8 µm and 60.0±6.9 µm were observed after one and four days, respectively, compared to 26.5±3.1 µm in normal mice. Three-dimensional micro-CT images were constructed and histograms of radiodensity - Hounsfield Units (HU) - were used to assess changes in mouse lungs. Radiation-induced lung injury was observed in irradiated mice, by the use of two parameters which were defined as shifts in peak HU between −200 to −800 HU (Peak_HU) and increase in the number of pixels at −1000 HU (Number_-1000). These parameters were correlated with histological changes. The results demonstrate that micro-CT can be used for the early detection and assessment of structural and histopathological changes resulting from radiation-induced lung injury in mice. Micro-CT has the advantage, over traditional histological techniques, of allowing longitudinal studies of lung disease progression and assessment of the entire lung, while reducing the number of animals required for such studies.

Toward truly combined PET/CT imaging using PET detectors and photon counting CT with iterative reconstruction implementing physical detector response

PURPOSE

This paper intends to demonstrate the feasibility of truly combined PET/CT imaging and addresses some of the major challenges raised by this dual modality approach. A method is proposed to retrieve maximum accuracy out of limited resolution computed tomography (CT) scans acquired with positron emission tomography (PET) detectors.

METHODS

A PET/CT simulator was built using the LabPET™ detectors and front-end electronics. Acquisitions of energy-binned data sets were made using this low spatial resolution CT system in photon counting mode. To overcome the limitations of the filtered back-projection technique, an iterative reconstruction library was developed and tested for the counting mode CT. Construction of the system matrix is based on a preregistered raster scan from which the experimental detector response is obtained. PET data were obtained sequentially with CT in a conventional manner.

RESULTS

A meticulous description of the system geometry and misalignment corrections is imperative and was incorporated into the matrix definition to achieve good image quality. Using this method, no sinogram precorrection or interpolation is necessary and measured projections can be used as raw input data for the iterative reconstruction algorithm. Genuine dual modality PET/CT images of phantoms and animals were obtained for the first time using the same detection platform.

CONCLUSIONS

CT and fused PET/CT images show that LabPET™ detectors can be successfully used as individual X-ray photon counting devices for low-dose CT imaging of the anatomy in a molecular PET imaging context.

Spectral optimization for micro-CT

PURPOSE

To optimize micro-CT protocols with respect to x-ray spectra and thereby reduce radiation dose at unimpaired image quality.

METHODS

Simulations were performed to assess image contrast, noise, and radiation dose for different imaging tasks. The figure of merit used to determine the optimal spectrum was the dose-weighted contrast-to-noise ratio (CNRD). Both optimal photon energy and tube voltage were considered. Three different types of filtration were investigated for polychromatic x-ray spectra: 0.5 mm Al, 3.0 mm Al, and 0.2 mm Cu. Phantoms consisted of water cylinders of 20, 32, and 50 mm in diameter with a central insert of 9 mm which was filled with different contrast materials: an iodine-based contrast medium (CM) to mimic contrast-enhanced (CE) imaging, hydroxyapatite to mimic bone structures, and water with reduced density to mimic soft tissue contrast. Validation measurements were conducted on a commercially available micro-CT scanner using phantoms consisting of water-equivalent plastics. Measurements on a mouse cadaver were performed to assess potential artifacts like beam hardening and to further validate simulation results.

RESULTS

The optimal photon energy for CE imaging was found at 34 keV. For bone imaging, optimal energies were 17, 20, and 23 keV for the 20, 32, and 50 mm phantom, respectively. For density differences, optimal energies varied between 18 and 50 keV for the 20 and 50 mm phantom, respectively. For the 32 mm phantom and density differences, CNRD was found to be constant within 2.5% for the energy range of 21-60 keV. For polychromatic spectra and CMs, optimal settings were 50 kV with 0.2 mm Cu filtration, allowing for a dose reduction of 58% compared to the optimal setting for 0.5 mm Al filtration. For bone imaging, optimal tube voltages were below 35 kV. For soft tissue imaging, optimal tube settings strongly depended on phantom size. For 20 mm, low voltages were preferred. For 32 mm, CNRD was found to be almost independent of tube voltage. For 50 mm, voltages larger than 50 kV were preferred. For all three phantom sizes stronger filtration led to notable dose reduction for soft tissue imaging. Validation measurements were found to match simulations well, with deviations being less than 10%. Mouse measurements confirmed simulation results.

CONCLUSIONS

Optimal photon energies and tube settings strongly depend on both phantom size and imaging task at hand. For in vivo CE imaging and density differences, strong filtration and voltages of 50-65 kV showed good overall results. For soft tissue imaging of animals the size of a rat or larger, voltages higher than 65 kV allow to greatly reduce scan times while maintaining dose efficiency. For imaging of bone structures, usage of only minimum filtration and low tube voltages of 40 kV and below allow exploiting the high contrast of bone at very low energies. Therefore, a combination of two filtrations could prove beneficial for micro-CT: a soft filtration allowing for bone imaging at low voltages, and a variable stronger filtration (e.g., 0.2 mm Cu) for soft tissue and contrast-enhanced imaging.

In vivo visualization of gold-loaded cells in mice using x-ray computed tomography

The ability to perform cell tracking using x-ray computed tomography combined with gold nanoparticles has been demonstrated recently on ex vivo samples using different malignant and nonmalignant cell lines. Here we proved the concept of the method for in vivo assessment in a small-animal model of malignant brain tumors. The limitations of the method due to radiation dose constraints were investigated using Monte Carlo simulations. Taking into consideration different x-ray entrance doses and the spatial resolution, the visibility of the cell clusters was evaluated. The results of the experiments conducted on mice implanted with F98 tumor cells confirmed the prediction of the Monte Carlo calculations. Small clusters of cells exogenously loaded with gold nanoparticles could be visualized using our in vivo method.

FROM THE CLINICAL EDITOR

This article discusses the use of CT-based detection of gold nanoparticle loaded cells of interest in small-animal models of malignant brain tumors, where small clusters of cells loaded with gold nanoparticles could be visualized.

How precise is dental volumetric tomography in the prediction of bone density?

Objectives. The aim of this study was to review the bone density assessment techniques and evaluate the macroscopic structure of bone specimens scored by Hounsfield Units (HUs) and decide if they are always in congruence. Methods. The mandible of a formalin-fixed human cadaver was scanned by dental volumetric tomography (DVT) for planning of the specimen positions and fabrication of a surgical guide and a surgical stent was fabricated afterwards. Bone cylinders of 3.5 mm diameter and 5 mm length, were excised from the mandible using the surgical stent with a slow speed trephine drill. After removal of the cylinders two more scans were performed and the images of the first scan were used for the determination of the HU values. The removed bone cylinder was inspected macroscopically as well by micro-CT scan. Results. The highest HU values were recorded in the interforaminal region, especially in the midline (408–742). Posterior regions showed lower HU values, especially the first molar regions (22–61 for the right; 14–66 for the left first molar regions). Conclusion. Within the limitations of this pilot study, it can be concluded that HU values alone could be a misleading diagnostic tool for the determination of bone density.

Advances in microscopy and complementary imaging techniques to assess the fate of drugs ex vivo in respiratory drug delivery: an invited paper

The technical advances in microscopy imaging techniques have been applied to assess the fate of drugs for researching respiratory drug delivery in ex vivo and in vivo experiments. Recent developments in optical imaging (confocal microscopy, multi-photon microscopy, fluorescence imaging (FLI) and bioluminescence imaging (BLI)), and in non-optical imaging (magnetic resonance imaging (MRI), computing tomography (CT), positron-emission tomography (PET) and single-photon-emission computed tomography (SPECT)) are presented with their derivative medical devices. Novel microscopy have been utilized to address many biological questions in basic research and are becoming powerful clinical tools for non-invasive objective diagnosis, guided treatment, and monitoring therapies. The goal of this paper is to present recent advances in microscopy imaging techniques and to discuss their novel applications in respiratory drug delivery imaging.

Quantitative imaging of cartilage and bone morphology, reactive oxygen species, and vascularization in a rodent model of osteoarthritis

OBJECTIVE

To assess temporal changes in cartilage and bone morphology, reactive oxygen species (ROS), and vascularization in rats with monosodium iodoacetate (MIA)-induced osteoarthritis (OA), using advanced imaging methodologies.

METHODS

Right knees of 8-week-old male Wistar rats were injected with 1 mg MIA in 50 μl saline and left knees were injected with 50 μl saline as controls. After 1, 2, and 3 weeks (n = 5 at each time point), changes in cartilage morphology and composition were quantified using equilibrium partitioning of an ionic contrast agent microfocal computed tomography (μCT), and changes in subchondral and trabecular bone were assessed by standard μCT. ROS were characterized by in vivo fluorescence imaging at 1, 11, and 21 days (n = 5 at each time point). Three weeks following fluorescence imaging, alterations in knee joint vascularity were quantified with μCT after perfusion of a vascular contrast agent.

RESULTS

Femoral cartilage volume, thickness, and proteoglycan content were significantly decreased in MIA-injected knees compared with control knees, accompanied by loss of trabecular bone and erosion of subchondral bone surface. ROS quantities were significantly increased 1 day after MIA injection and subsequently decreased gradually, having returned to normal by 21 days. Vascularity in whole knees and distal femora was significantly increased at 21 days after MIA injection.

CONCLUSION

Contrast-enhanced μCT and fluorescence imaging were combined to characterize articular cartilage, subchondral bone, vascularization, and ROS, providing unprecedented 3-dimensional joint imaging and quantification in multiple tissues during OA progression. These advanced imaging techniques have the potential to become standardized methods for comprehensive evaluation of articular joint degeneration and evaluation of therapeutic efficacy.

Quantitative monitoring of mouse lung tumors by magnetic resonance imaging

Primary lung cancer remains the leading cause of cancer-related death in the Western world, and the lung is a common site for recurrence of extrathoracic malignancies. Small-animal (rodent) models of cancer can have a very valuable role in the development of improved therapeutic strategies. However, detection of mouse pulmonary tumors and their subsequent response to therapy in situ is challenging. We have recently described MRI as a reliable, reproducible and nondestructive modality for the detection and serial monitoring of pulmonary tumors. By combining respiratory-gated data acquisition methods with manual and automated segmentation algorithms described by our laboratory, pulmonary tumor burden can be quantitatively measured in approximately 1 h (data acquisition plus analysis) per mouse. Quantitative, analytical methods are described for measuring tumor burden in both primary (discrete tumors) and metastatic (diffuse tumors) disease. Thus, small-animal MRI represents a novel and unique research tool for preclinical investigation of therapeutic strategies for treatment of pulmonary malignancies, and it may be valuable in evaluating new compounds targeting lung cancer in vivo.

Quantitative three-dimensional imaging of live avian embryonic morphogenesis via micro-computed tomography

Many clinically relevant congenital malformations arise during mid to late embryonic stages. This period is challenging to image quantitatively in live embryos, necessitating the use of multiple specimens with increased experimental variability. Here we establish X-ray and blood-pool computed tomography (CT) contrast agent toxicity and teratogenesis thresholds for 3D Micro-CT imaging of live avian embryos. Day 4 chick embryos micro-injected with Visipaque™ (VP) developed for an additional 6 days without defect. X-ray radiation up to 798 mGy was nontoxic. Peak average contrast of 1,060 HU occurred within 1 hr of imaging at 50 μm resolution. VP-enhanced contrast persisted past 24 hr with delayed accumulation in the allantois. Regional volumes of VP-injected embryos were statistically identical to those of fixed embryos perfused with osmium tetroxide. We further quantified longitudinal volumetric morphogenesis of the allantois over 30 hr. These results demonstrate the safety and efficacy of contrast enhanced quantitative micro-CT imaging for live embryos.

Optimized murine lung preparation for detailed structural evaluation via micro-computed tomography

Utilizing micro-X-ray CT (μCT) imaging, we sought to generate an atlas of in vivo and intact/ex vivo lungs from normal murine strains. In vivo imaging allows visualization of parenchymal density and small airways (15-28 μm/voxel). Ex vivo imaging of the intact lung via μCT allows for improved understanding of the three-dimensional lung architecture at the alveolar level with voxel dimensions of 1-2 μm. μCT requires that air spaces remain air-filled to detect alveolar architecture while in vivo structural geometry of the lungs is maintained. To achieve these requirements, a fixation and imaging methodology that permits nondestructive whole lung ex vivo μCT imaging has been implemented and tested. After in vivo imaging, lungs from supine anesthetized C57Bl/6 mice, at 15, 20, and 25 cmH(2)O airway pressure, were fixed in situ via vascular perfusion using a two-stage flushing system while held at 20 cmH(2)O airway pressure. Extracted fixed lungs were air-dried. Whole lung volume was acquired at 1, 7, 21, and >70 days after the lungs were dried and served as validation for fixation stability. No significant shrinkage was observed: +8.95% change from in vivo to fixed lung (P = 0.12), -1.47% change from day 1 to day 7 (P = 0.07), -2.51% change from day 1 to day 21 (P = 0.05), and -4.90% change from day 1 to day 70 and thereafter (P = 0.04). μCT evaluation showed well-fixed alveoli and capillary beds correlating with histological analysis. A fixation and imaging method has been established for μCT imaging of the murine lung that allows for ex vivo morphometric analysis, representative of the in vivo lung.

Visualization and quantification of intraperitoneal tumors by in vivo computed tomography using negative contrast enhancement strategy in a mouse model of ovarian cancer

Small animal computed tomography (CT) has poor intrinsic soft tissue contrast, limiting evaluation of intra-abdominal structures. Using standard intravascular-extracellular intravenous contrast (IE-IV) alone is theoretically limited by long acquisition times of traditional small animal scanners that may result in equilibration. We assessed whether a negative contrast strategy of enhancing normal tissue surrounding tumor, instead of the tumor itself, can visualize and quantify intraperitoneal (IP) cancer in a mouse model. Two and a half weeks after IP injection of Hey A8 cells, four groups of three animals each were administered serial dilutions of IV Fenestra LC (RES-IV), oral Gastroview, and IP Optiray 320. Another group of three animals was administered IV Optiray 320 (IE-IV), oral Gastroview, and IP Optiray 320 in successive combinations. Both groups were imaged by CT. Tumor and organ Hounsfield units were measured, and visualization was assessed. With increasing contrast amount, the Hounsfield unit of organs generally increased, whereas that of tumor remained essentially stable. The visualization of abdominal organs and tumor also generally increased with increasing contrast amount. Visualization of tumor and its margins adjacent to liver, spleen, and stomach was significantly better on administering RES-IV. However, for tumor adjacent to bladder, both IE-IV and RES-IV were equivalent. In vivo CT-derived tumor weights correlated highly with ex vivo tumor weights (r = 0.96, P < .0001, n = 15). Thus, CT using negative contrast enhancement strategy allows visualization and quantification of IP tumors. Such a strategy will also enable anatomic localization of functional signal for combination/molecular imaging.

Analysis of image sharpness reproducibility on a novel engineered micro-CT scanner with variable geometry and embedded recalibration software

This study investigates the reproducibility of the reconstructed image sharpness, after modifications of the geometry setup, for a variable magnification micro-CT (μCT) scanner. All the measurements were performed on a novel engineered μCT scanner for in vivo imaging of small animals (Xalt), which has been recently built at the Institute of Clinical Physiology of the National Research Council (IFC-CNR, Pisa, Italy), in partnership with the University of Pisa. The Xalt scanner is equipped with an integrated software for on-line geometric recalibration, which will be used throughout the experiments. In order to evaluate the losses of image quality due to modifications of the geometry setup, we have made 22 consecutive acquisitions by changing alternatively the system geometry between two different setups (Large FoV - LF, and High Resolution - HR). For each acquisition, the tomographic images have been reconstructed before and after the on-line geometric recalibration. For each reconstruction, the image sharpness was evaluated using two different figures of merit: (i) the percentage contrast on a small bar pattern of fixed frequency (f = 5.5 lp/mm for the LF setup and f = 10 lp/mm for the HR setup) and (ii) the image entropy. We have found that, due to the small-scale mechanical uncertainty (in the order of the voxel size), a recalibration is necessary for each geometric setup after repositioning of the system's components; the resolution losses due to the lack of recalibration are worse for the HR setup (voxel size = 18.4 μm). The integrated on-line recalibration algorithm of the Xalt scanner allowed to perform the recalibration quickly, by restoring the spatial resolution of the system to the reference resolution obtained after the initial (off-line) calibration.

Evaluation of the radiation dose in micro-CT with optimization of the scan protocol

INTRODUCTION

Micro-CT provides non-invasive anatomic evaluation of small animals. Serial micro-CT measurements are, however, hampered by the severity of ionizing radiation doses cumulating over the total period of follow-up. The dose levels may be sufficient to influence experimental outcomes such as animal survival or tumor growth.

AIM

This study was designed to evaluate the radiation dose of micro-CT and to optimize the scanning protocol for longitudinal micro-CT scans.

METHODS AND MATERIALS

Normal C57Bl/6 mice were euthanized. Radiation exposure was measured using individually calibrated lithium fluoride thermoluminescent dosimeters (TLDs). Thirteen TLDs were placed in the mice at the thyroid, lungs, liver, stomach, colon, bladder and near the spleen. Micro-CT (SkyScan 1178) was performed using two digital X-ray cameras which scanned over 180 degrees at a resolution of 83 microm, a rotation step of 1.08 degrees , 50 kV, 615 microA and 121 s image acquisition time. The TLDs were removed after each scan. CTDI(100) was measured with a 100 mm ionization chamber, centrally positioned in a 2.7 cm diameter water phantom, and rotation steps were increased to reduce both scan time and radiation dose.

RESULTS

Internal TLD analysis demonstrated median organ dose of 5.5 +/- 0.6 mGy per mA s, confirmed by CTDI(100) with result of 6.6 mGy per mA s. A rotation step of 2.16 resulted in qualitatively accurate images. At a resolution of 83 microm the scan time is reduced to 63 s with an estimated dose of 2.9 mGy per mA s. At 166 microm resolution, the scan time is limited to 27 s, with a concordant dose of 1.2 mGy per mA s.

CONCLUSIONS

The radiation dose of a standard micro-CT scan is relatively high and could influence the experimental outcome. We believe that the presented adaptation of the scan protocol allows for accurate imaging without the risk of interfering with the experimental outcome of the study.

Algorithm-enabled low-dose micro-CT imaging

Micro-computed tomography (micro-CT) is an important tool in biomedical research and preclinical applications that can provide visual inspection of and quantitative information about imaged small animals and biological samples such as vasculature specimens. Currently, micro-CT imaging uses projection data acquired at a large number (300-1000) of views, which can limit system throughput and potentially degrade image quality due to radiation-induced deformation or damage to the small animal or specimen. In this work, we have investigated low-dose micro-CT and its application to specimen imaging from substantially reduced projection data by using a recently developed algorithm, referred to as the adaptive-steepest-descent-projection-onto-convex-sets (ASD-POCS) algorithm, which reconstructs an image through minimizing the image total-variation and enforcing data constraints. To validate and evaluate the performance of the ASD-POCS algorithm, we carried out quantitative evaluation studies in a number of tasks of practical interest in imaging of specimens of real animal organs. The results show that the ASD-POCS algorithm can yield images with quality comparable to that obtained with existing algorithms, while using one-sixth to one quarter of the 361-view data currently used in typical micro-CT specimen imaging.

Phantom and cadaver measurements of dose and dose distribution in micro-CT of the chest in mice

BACKGROUND

Micro-computed tomography (CT) allows high-resolution imaging of the chest in mice for small animal research with a significant radiation dose applied.

PURPOSE

To report on measurement of the applied radiation dose using different scan protocols in micro-CT of the chest in mice.

MATERIAL AND METHODS

Repetitive dose measurements were performed for four different micro-CT protocols (with/without respiratory gating) and for micro-CT fluoroscopy used for chest imaging. Measurements were carried out using thermoluminescence dosimeters (TLD) in mouse cadavers and in a PMMA phantom allowing measurement of the radiation dose in the direct path of rays and assessment of scattered radiation.

RESULTS

The dose measured inside and outside the chests of the cadavers varied between 190 und 210 mGy, respectively. The expected mean doses in mice in the direct path of rays for the four examined micro-CT protocols varied between 170 and 280 mGy. The mean values for 1 and 5 minutes of fluoroscopy were 17 mGy and 105 mGy, respectively.

CONCLUSION

The measured dose values are similar to the dose values for micro-CT of the chest reported so far. A relevant dose can be delivered by micro-CT of the chest, which could possibly interact with small animal studies. Therefore, the applied dose for a specific protocol should be known and adverse radiation effects be considered.

Detecting cell death with optical coherence tomography and envelope statistics

Currently no standard clinical or preclinical noninvasive method exists to monitor cell death based on morphological changes at the cellular level. In our past work we have demonstrated that quantitative high frequency ultrasound imaging can detect cell death in vitro and in vivo. In this study we apply quantitative methods previously used with high frequency ultrasound to optical coherence tomography (OCT) to detect cell death. The ultimate goal of this work is to use these methods for optically-based clinical and preclinical cancer treatment monitoring. Optical coherence tomography data were acquired from acute myeloid leukemia cells undergoing three modes of cell death. Significant increases in integrated backscatter were observed for cells undergoing apoptosis and mitotic arrest, while necrotic cells induced a decrease. These changes appear to be linked to structural changes observed in histology obtained from the cell samples. Signal envelope statistics were analyzed from fittings of the generalized gamma distribution to histograms of envelope intensities. The parameters from this distribution demonstrated sensitivities to morphological changes in the cell samples. These results indicate that OCT integrated backscatter and first order envelope statistics can be used to detect and potentially differentiate between modes of cell death in vitro.

Dosimetric variation due to the photon beam energy in the small-animal irradiation: a Monte Carlo study

PURPOSE

The impact of photon beam energy and tissue heterogeneities on dose distributions and dosimetric characteristics such as point dose, mean dose, and maximum dose was investigated in the context of small-animal irradiation using Monte Carlo simulations based on the EGSnrc code.

METHODS

Three Monte Carlo mouse phantoms, namely, heterogeneous, homogeneous, and bone homogeneous were generated based on the same mouse computed tomography image set. These phantoms were generated by overriding the tissue type of none of the voxels (heterogeneous), all voxels (homogeneous), and only the bone voxels (bone homogeneous) to that of soft tissue. Phase space files of the 100 and 225 kVp photon beams based on a small-animal irradiator (XRad225Cx, Precision X-Ray Inc., North Branford, CT) were generated using BEAMnrc. A 360 degrees photon arc was simulated and three-dimensional (3D) dose calculations were carried out using the DOSXYZnrc code through DOSCTP in the above three phantoms. For comparison, the 3D dose distributions, dose profiles, mean, maximum, and point doses at different locations such as the isocenter, lung, rib, and spine were determined in the three phantoms.

RESULTS

The dose gradient resulting from the 225 kVp arc was found to be steeper than for the 100 kVp arc. The mean dose was found to be 1.29 and 1.14 times higher for the heterogeneous phantom when compared to the mean dose in the homogeneous phantom using the 100 and 225 kVp photon arcs, respectively. The bone doses (rib and spine) in the heterogeneous mouse phantom were about five (100 kVp) and three (225 kVp) times higher when compared to the homogeneous phantom. However, the lung dose did not vary significantly between the heterogeneous, homogeneous, and bone homogeneous phantom for the 225 kVp compared to the 100 kVp photon beams.

CONCLUSIONS

A significant bone dose enhancement was found when the 100 and 225 kVp photon beams were used in small-animal irradiation. This dosimetric effect, due to the presence of the bone heterogeneity, was more significant than that due to the lung heterogeneity. Hence, for kV photon energies of the range used in small-animal irradiation, the increase of the mean and bone dose due to the photoelectric effect could be a dosimetric concern.

Micro-CT enables microlocalisation and quantification of Her2-targeted gold nanoparticles within tumour regions

OBJECTIVES

Gold nanoparticles are of interest as potential in vivo diagnostic and therapeutic agents, as X-ray contrast agents, drug delivery vehicles and radiation enhancers. The aim of this study was to quantitatively determine their targeting and microlocalisation in mouse tumour models after intravenous injection by using micro-CT.

METHODS

Gold nanoparticles (15 nm) were coated with polyethylene glycol and covalently coupled to anti-Her2 antibodies (Herceptin). In vitro, conjugates incubated with Her2+ (BT-474) and Her2- (MCF7) human breast cancer cells showed specific targeted binding with a Her2+ to Her2- gold ratio of 39.4±2.7:1. Nude mice, simultaneously bearing subcutaneous Her2+ and Her2- human breast tumours in opposite thighs were prepared. Gold nanoparticles alone, conjugated to Herceptin or to a non-specific antibody were compared. After intravenous injection of the gold nanoparticles, gold concentrations were determined by atomic absorption spectroscopy. Microlocalisation of gold was carried out by calibrated micro-CT, giving both the radiodensities and gold concentrations in tumour and non-tumour tissue.

RESULTS

All gold nanoparticle constructs showed accumulation, predominantly at tumour peripheries. However, the Herceptin-gold nanoparticles showed the best specific uptake in their periphery (15.8±1.7% injected dose per gram), 1.6-fold higher than Her2- tumours and 22-fold higher than surrounding muscle. Imaging readily enabled detection of small, 1.5 mm-thick tumours.

CONCLUSION

In this pre-clinical study, antibody-targeted 15 nm gold nanoparticles showed preferential uptake in cognate tumours, but even untargeted gold nanoparticles enhanced the visibility of tumour peripheries and enabled detection of millimetre-sized tumours. Micro-CT enabled quantification within various regions of a tumour.

Longitudinal assessment of lung cancer progression in the mouse using in vivo micro-CT imaging

PURPOSE

Small animal micro-CT imaging is being used increasingly in preclinical biomedical research to provide phenotypic descriptions of genomic models. Most of this imaging is coincident with animal death and is used to show the extent of disease as an end point. Longitudinal imaging overcomes the limitation of single time-point imaging because it enables tracking of the natural history of disease and provides qualitative and, where possible, quantitative assessments of the effects of an intervention. The pulmonary system is affected by many disease conditions, such as lung cancer, chronic obstructive pulmonary disease, asthma, and granulomatous disorders. Noninvasive imaging can accurately assess the lung phenotype within the living animal, evaluating not only global lung measures, but also regional pathology. However, imaging the lung in the living animal is complicated by rapid respiratory motion, which leads to image based artifacts. Furthermore, no standard mouse lung imaging protocols exist for longitudinal assessment, with each group needing to develop their own systematic approach.

METHODS

In this article, the authors present an outline for performing longitudinal breath-hold gated micro-CT imaging for the assessment of lung nodules in a mouse model of lung cancer. The authors describe modifications to the previously published intermittent isopressure breath-hold technique including a new animal preparation and anesthesia protocol, implementation of a ring artifact reduction, variable scanner geometry, and polynomial beam hardening correction. In addition, the authors describe a multitime-point data set registration and tumor labeling and tracking strategy.

RESULTS

In vivo micro-CT data sets were acquired at months 2, 3, and 4 posturethane administration in cancer mice (n = 5) and simultaneously in control mice (n = 3). 137 unique lung nodules were identified from the cancer mice while no nodules were detected in the control mice. A total of 411 nodules were segmented and labeled over the three time-points. Lung nodule metrics including RECIST, Ortho, WHO, and 3D volume were determined and extracted. A tumor incidence rate of 30.44 +/- 1.93 SEM for n = 5 was found with identification of nodules as small as 0.11 mm (RECIST) and as large as 1.66 mm (RECIST). In addition, the tumor growth and doubling rate between months 2-3 and 3-4 were calculated. Here, the growth rate was slightly higher in the second period based on the 3D volume data (0.12 +/- 0.13 to 0.13 +/- 0.17 microl) but significantly less based on the linear diameter metrics [RECIST (0.33 +/- 0.19 to 0.17 +/- 0.18 mm); Ortho (0.24 +/- 0.15 to 0.16 +/- 0.15 mm)], indicating the need to understand how each metric is obtained and how to correctly interpret change in tumor size.

CONCLUSIONS

In conclusion, micro-CT imaging provides a unique platform for in vivo longitudinal assessment of pulmonary lung cancer progression and potentially tracking of therapies at very high resolutions. The ability to evaluate the same subject over time provides for a sensitive assay that can be carried out on a smaller sample size. When integrated with image processing and analysis routines as detailed in this study, the data acquired from micro-CT imaging can now provide a very powerful assessment of pulmonary disease outcomes.

In vitro assessment of poly-iodinated triglyceride reconstituted low-density lipoprotein: initial steps toward CT molecular imaging

RATIONALE AND OBJECTIVES

Targeted molecular probes offer the potential for greater specificity in cancer imaging with contrast-enhanced computed tomography (CT). We investigate a low-density lipoprotein (LDL) nanoparticle loaded with poly-iodinated triglyceride (ITG) in a proof of concept study of targeted x-ray imaging. LDLs are targeted to the LDL cell surface receptor (LDLR), which is overexpressed in several tumor types. The LDL-LDLR pathway presents a high-capacity and self-renewing transport system for molecular imaging in CT.

MATERIALS AND METHODS

ITG was synthesized and loaded into the core of LDL particles to form a reconstituted nanoparticle, hereafter referred to as (rITG)LDL. Particle size was measured by dynamic light scattering. The x-ray attenuation of the (rITG)LDL solution was measured with CT imaging and signal enhancement was calibrated for equivalent iodine concentration. Cultured human hepatoblastoma G2 (HepG2) cells, which overexpress LDLR, were incubated with (rITG)LDL with or without native LDL. The cells were imaged with CT to characterize particle sequestration.

RESULTS

Reconstitution of LDL with ITG was successful and did not compromise the targeting function of the particle. Measurement of the x-ray attenuation properties of the (rITG)LDL solution revealed an effective iodine concentration of 0.78 mg/mL. In vitro studies of HepG2 cells demonstrated a significant increase in CT image intensity over control cells when incubated with (rITG)LDL.

CONCLUSION

The in vitro results of this study suggest that (rITG)LDL can provide adequate image enhancement for CT molecular imaging. Potential applications include breast imaging and small animal imaging at low x-ray energies. In vivo experiments will be required to verify that tumor uptake of (rITG)LDL is sufficient for enhanced detection. Use at higher x-ray energies, as used in conventional CT, will require a further increase in iodine loading.

In vivo near-infrared fluorescence imaging of cancer with nanoparticle-based probes

The use of in vivo near-infrared fluorescence (NIRF) imaging techniques for sensitive cancer early detection is highly desirable, because biological tissues show very low absorption and autofluorescence in the NIR spectrum window. Cancer NIRF molecular imaging relies greatly on stable, highly specific and sensitive molecular probes. Nanoparticle-based NIRF probes have overcome some of the limitations of the conventional NIRF organic dyes, such as poor hydrophilicity and photostability, low quantum yield, insufficient stability in biological system, low detection sensitivity, etc. Therefore, a lot of efforts have been made to actively develop novel NIRF nanoparticles for in vivo cancer molecular imaging. The main focus of this article is to provide a brief overview of the synthesis, surface modification, and in vivo cancer imaging applications of nanoparticle-based NIRF probes, including dye-containing nanoparticles, NIRF quantum dots, and upconversion nanoparticles.

A high-frequency, high frame rate duplex ultrasound linear array imaging system for small animal imaging

High-frequency (HF) ultrasound imaging has been shown to be useful for non-invasively imaging anatomical structures of the eye and small animals in biological and pharmaceutical research, achieving superior spatial resolution. Cardiovascular research utilizing mice requires not only realtime B-scan imaging, but also ultrasound Doppler to evaluate both anatomy and blood flow of the mouse heart. This paper reports the development of an HF ultrasound duplex imaging system capable of both B-mode imaging and Doppler flow measurements, using a 64-element linear array. The system included an HF pulsed-wave Doppler module, a 32-channel HF B-mode imaging module, a PC with a 200 MS/s 14-bit A/D card, and real-time LabView software. A 50 dB SNR and a depth of penetration of larger than 12 mm were achieved using a 35-MHz linear array with 50 μm pitch. The two-way beam widths were determined to be 165 to 260 μm and the clutter-energy-to-total-energy ratio (CTR) were 9.1 to 12 dB when the array was electronically focused at different focal points at depths from 4.8 to 9.6 mm. The system is capable of acquiring real-time B-mode images at a rate greater than 400 frames per second (fps) for a 4.8 x 13 mm field of view, using a 30- MHz 64-element linear array with 100 μm pitch. Sample in vivo cardiac high frame rate images and duplex images of mouse hearts are shown to assess its current imaging capability and performance for small animals.

Pulmonary abnormalities in mice with paracoccidioidomycosis: a sequential study comparing high resolution computed tomography and pathologic findings

Background

Human paracoccidioidomycosis (PCM) is an endemic fungal disease of pulmonary origin. Follow-up of pulmonary lesions by image studies in an experimental model of PCM has not been previously attempted. This study focuses on defining patterns, topography and intensity of lung lesions in experimentally infected PCM mice by means of a comparative analysis between High Resolution Computed Tomography (HRCT) and histopathologic parameters.

Methodology

Male BALB/c mice were intranasally inoculated with 3×10⁶Paracoccidioides brasiliensis (Pb) conidia (n = 50) or PBS (n = 50). HRCT was done every four weeks to determine pulmonary lesions, quantify lung density, reconstruct and quantify lung air structure. Lungs were also analyzed by histopathology and histomorphometry.

Results

Three different patterns of lesions were evidenced by HRCT and histopathology, as follows: nodular-diffuse, confluent and pseudo-tumoral. The lesions were mainly located around the hilus and affected more frequently the left lung. At the 4^th week post-challenge HRCT showed that 80% of the Pb-infected mice had peri-bronchial consolidations associated with a significant increase in upper lung density when compared with controls, (−263±25 vs. −422±10 HU, p<0.001). After the 8^th and 12^th weeks, consolidation had progressed involving also the middle regions. Histopathology revealed that consolidation as assessed by HRCT was equivalent histologically to a confluent granulomatous reaction, while nodules corresponded to individual compact granulomas. At the 16^th week of infection, confluent granulomas formed pseudotumoral masses that obstructed large bronchi. Discrete focal fibrosis was visible gradually around granulomas, but this finding was only evident by histopathology.

Conclusions/Significance

This study demonstrated that conventional HRCT is a useful tool for evaluation and quantification of pulmonary damage occurring in experimental mouse PCM. The experimental design used decreases the need to sacrifice a large number of animals, and serves to monitor treatment efficacy by means of a more rational approach to the study of human lung disease.

Paracoccidioidomycosis (PCM) is a fungal infection caused by the dimorphic fungus Paracoccidioides brasiliensis. It occurs preferentially in rural workers in whom the disease is severe and may cause incapacitating pulmonary sequelae. Assessment of disease progression and treatment outcome normally includes chest x-rays or CT studies. Existing experimental PCM models have focused on several aspects, but none has done a radiologic or image follow-up evaluation of pulmonary lesions considered as the fungus primary target. In this study, the lungs of mice infected with fungal conidia were studied sequentially during the chronic stage of their experimental mycosis by noninvasive high resolution medical computed tomography, and at time of sacrifice, also by histopathology to characterize pulmonary abnormalities. Three basic lung lesion patterns were revealed by both techniques: nodular-diffuse, confluent and pseudo-tumoral which were located mainly around the hilus thus accurately reflecting the situation in human patients. The experimental design of this study decreases the need to sacrifice a large number of animals, and serves to monitor treatment efficacy by means of a more rational approach to the study of human pulmonary diseases. The findings we are reporting open new avenues for experimental research, increase our understanding of the mycosis pathogenesis and consequently have repercussions in patients' care.

Combined system of fluorescence diffuse optical tomography and microcomputed tomography for small animal imaging

We developed a dual-modality system that combines fluorescence diffuse optical tomography (fDOT) and flat panel detector-based microcomputed tomography (micro-CT) to simultaneously reveal molecular and structural information in small animals. In fDOT, a 748 nm diode laser was used as an excitation source, while a cooled charge coupled device camera was adopted to collect transmission fluorescence. In micro-CT, a flat panel detector based on amorphous silicon, with active area of 13 x 13 cm(2), and a microfocus x-ray tube were used. The fDOT system was mounted orthogonally to the micro-CT and the projection images were acquired without rotation of the sample, which is different from the method used for micro-CT alone. Both the finite element method and the algebraic reconstruction technique were used to reconstruct images from the fDOT. Phantom data showed that the resolution of the fDOT system was about 3 mm at an imaging depth of 7 mm. Quantitative error was no more than 5% and imaging sensitivity for 1,1(')-dioctadecyl-3,3,3('),3(')-etramethylindotricarbocyanine iodide bis-oleate (DiR-BOA) was estimated to be higher than 100 nM at a depth of 7 mm. Calculations of the phantom's center of mass showed that the location accuracy of fDOT was about 0.7 mm. We applied a Feldkamp algorithm to reconstruct the micro-CT image. By measuring the presampled modulation transfer function with a 30 microm tungsten thread, we estimated that the micro-CT has a resolution of 5 mm(-1) when the field of view was 6.5 cm. Our results indicate the uniformity of the transaxial micro-CT image and the contrast-to-noise ratio was measured as 1.95 for a radiation dose of 1 cGy. A non-image-based method was employed for merging images from the two imaging modalities. A nude mouse with DiR-BOA, imaged ex vivo, was used to validate the feasibility of the dual-modality system.

Small-animal molecular imaging methods

The ability to trace or identify specific molecules within a specific anatomic location provides insight into metabolic pathways, tissue components, and tracing of solute transport mechanisms. With the increasing use of small animals for research, such imaging must have sufficiently high spatial resolution to allow anatomic localization as well as sufficient specificity and sensitivity to provide an accurate description of the molecular distribution and concentration.

METHODS

Imaging methods based on electromagnetic radiation, such as PET, SPECT, MRI, and CT, are increasingly applicable because of recent advances in novel scanner hardware and image reconstruction software and the availability of novel molecules that have enhanced sensitivity in these methodologies.

RESULTS

Small-animal PET has been advanced by the development of detector arrays that provide higher resolution and positron-emitting elements that allow new molecular tracers to be labeled. Micro-MRI has been improved in terms of spatial resolution and sensitivity through increased magnet field strength and the development of special-purpose coils and associated scan protocols. Of particular interest is the associated ability to image local mechanical function and solute transport processes, which can be directly related to the molecular information. This ability is further strengthened by the synergistic integration of PET with MRI. Micro-SPECT has been improved through the use of coded aperture imaging approaches as well as image reconstruction algorithms that can better deal with the photon-limited scan data. The limited spatial resolution can be partially overcome by integrating SPECT with CT. Micro-CT by itself provides exquisite spatial resolution of anatomy, but recent developments in high-spatial-resolution photon counting and spectrally sensitive imaging arrays, combined with x-ray optical devices, hold promise for actual molecular identification by virtue of the chemical bond lengths of molecules, especially biopolymers.

CONCLUSION

Given the increasing use of small animals for evaluating new clinical imaging techniques and providing more insight into pathophysiologic phenomena as well as the availability of improved detection systems, scanning protocols, and associated software, the sensitivity and specificity of molecular imaging are increasing.

Combined fluorescence and X-Ray tomography for quantitative in vivo detection of fluorophore

Initial results from a novel dual modality preclinical imager which combines non-contact fluorescence tomography (FT) and x-ray computed tomography (CT) for preclinical functional and anatomical in vivo imaging are presented. The anatomical data from CT provides a priori information to the FT reconstruction to create overlaid functional and anatomical images with accurate localization and quantification of fluorophore distribution. Phantoms with inclusions containing Indocyanine-Green (ICG), and with heterogeneous backgrounds including iodine in compartments at different concentrations for CT contrast, have been imaged with the dual modality FT/CT system. Anatomical information from attenuation maps and optical morphological information from absorption and scattering maps are used as a priori information in the FT reconstruction. Although ICG inclusions can be located without the a priori information, the recovered ICG concentration shows 75% error. When the a priori information is utilized, the ICG concentration can be recovered with only 15% error. Developing the ability to accurately quantify fluorophore concentration in anatomical regions of interest may provide a powerful tool for in vivo small animal imaging.

Quality control of micro-computed tomography systems

The rapid proliferation of micro-computed tomography (micro-CT) scanners in preclinical small animal studies has created a need for a method on scanner performance evaluation and scan parameter optimisation. The purpose of this study was to investigate the performance of the scanner with a dedicated micro-CT phantom. The phantom was developed with different independent sections that allow for measurement of major scanner characteristics such as uniformity, linearity, contrast response, dosimetry and resolution. The results of a thorough investigation are discussed.

Impact of hydrogel nanoparticle size and functionalization on in vivo behavior for lung imaging and therapeutics

Polymer chemistry offers the possibility of synthesizing multifunctional nanoparticles which incorporate moieties that enhance diagnostic and therapeutic targeting of cargo delivery to the lung. However, since rules for predicting particle behavior following modification are not well-defined, it is essential that probes for tracking fate in vivo are also included. Accordingly, we designed polyacrylamide-based hydrogel particles of differing sizes, functionalized with a nona-arginine cell-penetrating peptide (Arg(9)), and labeled with imaging components to assess lung retention and cellular uptake after intratracheal administration. Radiolabeled microparticles (1-5 microm diameter) and nanoparticles (20-40 nm diameter) without and with Arg(9) showed diffuse airspace distribution by positron emission tomography imaging. Biodistribution studies revealed that particle clearance and extrapulmonary distribution was, in part, size dependent. Microparticles were rapidly cleared by mucociliary routes but, unexpectedly, also through the circulation. In contrast, nanoparticles had prolonged lung retention enhanced by Arg(9) and were significantly restricted to the lung. For all particle types, uptake was predominant in alveolar macrophages and, to a lesser extent, lung epithelial cells. In general, particles did not induce local inflammatory responses, with the exception of microparticles bearing Arg(9). Whereas microparticles may be advantageous for short-term applications, nanosized particles constitute an efficient high-retention and non-inflammatory vehicle for the delivery of diagnostic imaging agents and therapeutics to lung airspaces and alveolar macrophages that can be enhanced by Arg(9). Importantly, our results show that minor particle modifications may significantly impact in vivo behavior within the complex environments of the lung, underscoring the need for animal modeling.

Novel use of X-ray micro computed tomography to image rat sciatic nerve and integration into scaffold

This paper describes how specimens of nervous tissue can be prepared for successful imaging in X-ray Micro Computed Tomography (microCT), and how this method can be used to study the integration of nervous tissue into a polymeric scaffold. The sample preparation involves staining the biological tissue with osmium tetroxide to increase its X-ray attenuation, and a technique for maintaining the specimen in a moist environment during the experiment to prevent drying and shrinkage. Using this method it was possible to observe individual nerve fascicles and their relationship to the 3-D tissue structure. A scaffold supporting a regenerated sciatic nerve was similarly stained to distinguish the nervous tissue from the scaffold, and to observe how the nerve grew through a 2.5 mm long, 100 microm x 100 microm cross-section channel polyimide array. Furthermore, blood vessels could be identified in these images, and it was possible to monitor how a large proximal blood vessel split through the channel scaffold and proceeded down individual channels. This paper explains how microCT is a useful tool both for studying the location and extent of growth into a polymeric scaffold, and for determining whether the regenerated tissue has blood supply.

Molecular imaging of pulmonary disease in vivo

Characterization and noninvasive measurement of molecular pathways and biochemistry in living cells, animal models, and humans at the cellular and molecular level is now possible using remote imaging detectors. Positron and single photon emission tomography scanners, highly sensitive cameras for bioluminescence and fluorescence imaging, as well as high-magnetic-field magnetic resonance imaging scanners, can be used to study such diverse processes as signal transduction, receptor density and function, host response to pathogens, cell trafficking, and gene transfer. In many cases, images from more than one modality can be fused, allowing structure-function and multifunction relationships to be studied on a tissue-restricted or regional basis. "Molecular imaging" holds enormous potential for elucidating the molecular mechanisms of pulmonary disease and therapeutic response in intact animal models and humans.

Correlation of high-resolution X-ray micro-computed tomography with bioluminescence imaging of multiple myeloma growth in a xenograft mouse model

Multiple myeloma (MM) is an incurable B-cell neoplasia in which progressive skeletal lesions are a characteristic feature. Earlier we established an animal model for human MM in the immune-deficient RAG2(-/-)gammac(-/-) mouse, in which the growth of luciferase-transduced MM cells was visualized using noninvasive bioluminescence imaging (BLI). This model appeared well suited to study disease progression and response to therapy by identifying the location of various foci of MM tumor growth scattered throughout the skeleton and at subsequent time points the quantitative assessment of the tumor load by using BLI. We report here on the corresponding high-resolution X-ray micro-computed tomographic (micro-CT) analysis to study skeletal defects in the mice with full-blown MM. Several anatomical derangements were observed, including abnormalities in geometry and morphology, asymmetrical bone structures, decreased overall density in the remaining bone, loss of trabecular bone mass, destruction of the inner microarchitecture, as well as cortical perforations. Using the combination of BLI, micro-CT imaging, and immune-histopathological techniques, we found a high correlation between the micro-CT-identified lesions, exact tumor location, and infiltration leading to structural lesions and local bone deformation. This confirms that this animal model strongly resembles human MM and has the potential for studying the biology of MM growth and for preclinical testing of novel therapies for MM and for repair of MM-induced bone lesions.

Has quantitative multimodal imaging of treatment response arrived?

Although there have been dramatic increases in the range and quality of information available from noninvasive imaging methods, their application in clinical trials has been limited. One promising approach is to apply imaging techniques in preclinical studies designed to mimic a corresponding clinical trial in order to inform that trial.

Cone beam micro-CT system for small animal imaging and performance evaluation

A prototype cone-beam micro-CT system for small animal imaging has been developed by our group recently, which consists of a microfocus X-ray source, a three-dimensional programmable stage with object holder, and a flat-panel X-ray detector. It has a large field of view (FOV), which can acquire the whole body imaging of a normal-size mouse in a single scan which usually takes about several minutes or tens of minutes. FDK method is adopted for 3D reconstruction with Graphics Processing Unit (GPU) acceleration. In order to reconstruct images with high spatial resolution and low artifacts, raw data preprocessing and geometry calibration are implemented before reconstruction. A method which utilizes a wire phantom to estimate the residual horizontal offset of the detector is proposed, and 1D point spread function is used to assess the performance of geometric calibration quantitatively. System spatial resolution, image uniformity and noise, and low contrast resolution have been studied. Mouse images with and without contrast agent are illuminated in this paper. Experimental results show that the system is suitable for small animal imaging and is adequate to provide high-resolution anatomic information for bioluminescence tomography to build a dual modality system.

A screening platform for glioma growth and invasion using bioluminescence imaging

Object

The study of tumor cell growth and invasion in cancer biology is often limited by the inability to visualize tumor cell behavior in real time in animal models. The authors provide evidence that glioma cells are heterogeneous, with a subset responsible for increased invasiveness. The use of bioluminescence (BL) imaging to investigate dynamic aspects of glioma progression are discussed.

Methods

Glioblastoma multiforme–initiating cells were generated under conditions typically used to sustain neural stem cells. The invasiveness potential was determined using a Matrigel chamber. The presence of an “invasiveness gene signature” that correlated with patient survival outcome was ascertained through microarray gene expression analysis. To measure invasiveness, the authors devised a method focussed on BL imaging and tested it in vitro and in vivo using a zebrafish xenograft model. Bioluminescence imaging signals were verified using known inhibitors of glioma growth: AEE788, N-[(3,5-Difluorophenyl)acetyl]-L-alanyl-2-phenylglycine-1,1-dimethylethyl ester, and compound E.

Results

The authors' data support the idea that glioblastoma multiforme–initiating cells are heterogeneous and possess an invasive subset; BL imaging was used as a readout method to assess this invasive subset. The in vitro data obtained using a known glioma growth inhibitor, AEE788, showed that BL imaging could detect cellular movement and invasion even before overall cell death was detectable on conventional viability assays. Further work using a zebrafish tumor xenograft model supported the efficacy of BL imaging in monitoring changes in tumor load.

Conclusions

The authors used optically transparent zebrafish and high-resolution confocal imaging to track tumor growth in vivo and demonstrate the efficacy of this model for screening antitumor and antiangiogenic compounds. The integration of zebrafish transgenic technology into human cancer biological studies may aid in the development of cancer models targeting specific organs, tissues, or cell types within tumors. Zebrafish could also provide a cost-effective means for the rapid development of therapeutic agents directed at blocking tumor growth and invasion.

Quantification of mouse pulmonary cancer models by microcomputed tomography imaging

The advances in preclinical cancer models, including orthotopic implantation models or genetically engineered mouse models of cancer, enable pursuing the molecular mechanism of cancer disease that might mimic genetic and biological processes in humans. Lung cancer is the major cause of cancer deaths; therefore, the treatment and prevention of lung cancer are expected to be improved by a better understanding of the complex mechanism of disease. In this study, we have examined the quantification of two distinct mouse lung cancer models by utilizing imaging modalities for monitoring tumor progression and drug efficacy evaluation. The utility of microcomputed tomography (micro-CT) for real-time/non-invasive monitoring of lung cancer progression has been confirmed by combining bioluminescent imaging and histopathological analyses. Further, we have developed a more clinically relevant lung cancer model by utilizing K-ras(LSL-G12D)/p53(LSL-R270H) mutant mice. Using micro-CT imaging, we monitored the development and progression of solitary lung tumor in K-ras(LSL-G12D)/p53(LSL-R270H) mutant mouse, and further demonstrated tumor growth inhibition by anticancer drug treatment. These results clearly indicate that imaging-guided evaluation of more clinically relevant tumor models would improve the process of new drug discovery and increase the probability of success in subsequent clinical studies.

Three-dimensional analysis of rodent paranasal sinus cavities from X-ray computed tomography (CT) scans

Continuous isometric microfocal X-ray computed tomography (CT) scans were acquired from an AKR/J mouse, Brown-Norway rat, and Hartley guinea pig. The anatomy and volume of the paranasal sinus cavities were defined from 2-dimensional (2-D) and 3-dimensional (3-D) CT images. Realistic 3-D images were reconstructed and used to determine the anterior maxillary, posterior maxillary, and ethmoid sinus cavity airspace volumes (mouse: 0.6, 0.7, and 0.7 mm(3), rat: 8.6, 7.7, and 7.0 mm(3), guinea pig: 63.5, 46.6 mm(3), and no ethmoid cavity, respectively). The mouse paranasal sinus cavities are similar to the corresponding rat cavities, with a reduction in size, while the corresponding maxillary sinus cavities in the guinea pig are different in size, location, and architecture. Also, the ethmoid sinus cavity is connected by a common drainage pathway to the posterior maxillary sinus in mouse and rat while a similar ethmoid sinus was not present in the guinea pig. We conclude that paranasal sinus cavity airspace opacity (2-D) or volume (3-D) determined by micro-CT scanning may be used to conduct longitudinal studies on the patency of the maxillary sinus cavities of rodents. This represents a potentially useful endpoint for developing and testing drugs in a small animal model of sinusitis.

Preclinical Multimodality Imaging in Vivo

Multimodality small-animal molecular imaging has become increasingly important as transgenic and knockout mice are produced to model human diseases. With the ever-increasing number and importance of human disease models, particularly in rodents (mice and rats), the ability of high-resolution multimodality molecular imaging instrumentation to contribute unique information is becoming more common and necessary. Multimodality imaging with high spatial resolution and good sensitivity, which combines modalities and records sequentially or simultaneously complementary information, offers many advantages in certain research experiments. This article discusses the current trends and new horizons in preclinical multimodality imaging in-vivo and its role in biomedical research.